13 best grooving inserts
Grooving inserts are cutting tools used in machining processes, particularly in turning operations. These inserts are part of a broader category of cutting tools known as indexable inserts, which are designed for efficiency and cost-effectiveness in metalworking and other industrial applications.
Here are some key points about grooving inserts:
Function: Grooving inserts are specifically designed for creating grooves or recesses on the surface of a workpiece.These grooves can serve various purposes, including accommodating O-rings, creating undercuts, forming threads, or simply removing material to achieve the desired shape or size.
Indexable Inserts: Grooving inserts, like other indexable inserts, have a replaceable cutting edge. This means that when the cutting edge becomes dull or worn, it can be easily replaced with a new insert, saving time and cost compared to resharpening traditional cutting tools.
Material: Grooving inserts are typically made from hard materials such as carbide, cermet, or high-speed steel. The choice of material depends on factors like the workpiece material, cutting speed, and the desired surface finish.
Geometry: The geometry of a grooving insert is essential for its specific function. It includes features like the cutting edge angle, rake angle, chipbreaker design, and clearance angles. These factors are optimized to ensure efficient chip removal and minimal cutting forces.
Insert Types: Grooving inserts come in various types, including external grooving inserts and internal grooving inserts. External grooving inserts are used for making grooves on the outer diameter of a workpiece, while internal grooving inserts are used for making grooves inside holes or bores.
Applications: Grooving inserts find applications in a wide range of industries, including automotive, aerospace, and manufacturing. They are used for tasks such as creating precision grooves in engine components, forming threads on bolts, and producing grooves for seals in hydraulic systems.
Coolant and Chip Control: In machining processes, it's important to manage heat and chip control. Many grooving inserts have designs that allow for effective chip evacuation and may incorporate features to direct cutting fluids (coolants) to the cutting zone to reduce heat and prolong tool life.
Toolholders: To use grooving inserts effectively, machinists use toolholders designed to hold and secure the inserts in place. These toolholders can have various orientations and configurations to accommodate different machining requirements.
In summary, grooving inserts are essential cutting tools in the realm of metalworking and machining. They are specifically designed for creating grooves and recesses in workpieces efficiently and cost-effectively, thanks to their indexable nature and carefully optimized geometries. These tools play a vital role in various industries by enabling precise and controlled machining processes.
Below you can find our editor's choice of the best grooving inserts on the market
5/8" MGIVR2016-2 Boring Bar Lathe Turning Tool Holder 16mm Grooving Cut-Off Cutter with 10PCS MGMN200 Carbide Inserts for Metal
YO
Product description
Parameter:
- Shank Diameter: (5/8" inch / 16*16mm)- Boring Bar
Available Inserts:
--- MGMN200 Grooving Inserts
Package :
1 x MGIVR2016-2 Boring Bars
10 x MGMN200 Carbide inserts
1 x wrench
All products shipped before strict quality inspection, so as to ensure the normal operation of production
Warning: when machining, cutting tools may be broken due to shock in improper conditions, use protective materials such as safety glasses and protective gloves to prevent injury.
Please use the tools in the recommended cutting condition.
- 1. Model：1PC MGIVR2016-2(Boring Bar) + + 10PCS MGMN200-G (Grooving inserts)+1PC Wrench
- 2. Shank Diameter: 5/8" inch / 16*16mm
- 3. Grooving Holder Use the screw holes away from the center of the blade to be more firmly fixed.
- 4. MGMN200 Carbide Inserts : High hardness, wear resistance. Applicability safety factor.
- 5. After the fire, the higher processing accuracy, the use of longer life. All Lathe Tools shipped before strict quality inspection, so as to ensure the normal operation of production
User questions & answers
| Question: | what is the cut depth |
| Answer: | Since it didn't work at transfering audio through speakers I doubt the mic would work. Best thing is to use to recharge something and you got plenty of extra cables for the price. |
| Question: | What is shank's Overall Length |
| Answer: | They are mini blade fuses yes, but I don't own a Harley so I don't know. I bought them for my 4 wheeler and they fit fine in it |
TJATSE Carbide Inserts MGMN200-G Grooving Inserts for MGEHR/MGIVR CNC Lathe Cut Off Turning Tool-5 Pieces/Pack
TJATSE
Product description
MGMN200-G Grooving Cut-Off Turning Inserts
Features:
-Carbide Inserts
-Suitable for machining steel and cast iron,processing soft and soft stainless steeland aluminum line
-Glossy surface,effects on chip is good
Specification:
Color: Golden
Model: MGMN200 C5 Grade Coated
Material: Tungsten Carbide
Size: 16mm(L*3mmT*2mmD)
Quantity:5pcs
Corner Radius: 0.2mm
Thickness: 2.00 mm( 0.079")
Fit for: MGEHR/MGIVR Grooviing Cut-Off Tool
Package Included:
5pcs MGMN200-G carbide grooving inserts with storage case
- ♥Size Information: 5pcs MGMN200-G carbide insert: 6mm x 3mm x 2mm, fit for MGEHR / MGIVR grooving cut-off tool.
- ♥MGMN200 Carbide Inserts made of solid carbide, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
- ♥Specially designed chip breaker allows for narrower chips to promote better chip flow, great for grooving applications and can reduce the tool grinding cost and improve the cutting efficiency.
- ♥ Tin coated universal grade is suitable for steel and cast steel continuous cutting and interrupted cutting finishing to roughing. Also enhanced the surface gloss of the cutting pieces.
- ♥TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee.
ApplianPar MGEHR1212-2 Lathe Boring Bar Holder Grooving Turning Tool and 10pcs MGMN200-G Inserts with Wrench for Semi-Finishing, Finishing
Product description
Package includes: 10 x MGMN200-G inserts, 1 x MGEHR1212-2 Boring Bar Tool, 1 x T15 Wrench
- Good quality, excellent accessories for Lathe turning.
- Perfetct for semi-finishing, finishing
- Package includes: 10 x MGMN200-G inserts, 1 x MGEHR1212-2 Boring Bar Tool, 1 x T15 Wrench
Accusize Industrial Tools 1/2'' Shank Heavy Duty Indexable Grooving/Cut-Off Holder, Nickel Plated, with a Gtn-2 Tin Coated Carbide Insert, 2415-5024
Accusize Co., Ltd.
- For shallow precision grooving and profile/copy turning
- O-ring. snap-ring, relief grooving and high production
- Opening of wide grooves by plunging and side turning
- Precision clamping and insert indexing accuracy
- Stable under side cutting forces when profile turning
User questions & answers
| Question: | Does this include any carbide inserts and if so how many |
| Answer: | The cut depth is 4mm |
| Question: | Can i put a 1/4” wide carbide insert on this tool |
| Answer: | For 5/8“ MGIVR2016-2 Grooving Cut-off Cutter, the overall length of shank is 125mm |
| Question: | Are there any inserts for cutting poly v grooves |
| Answer: | I really don't have clue, but I would guess from their construction they will handle as much as the pins you are placing them on. |
| Question: | how deep a cut can this tool make |
| Answer: | Through hole. It is NOT a SMD. |
Product features
Self-Lock Carbide Cut-Off Insert, 0 Degree Angle, Tin Coated
- For cut-off and grooving, Single-sided notation, TiN coated for extra strength at higher speeds.
- Grade C-6 is a general-purpose grade for cutting all steel and stainless steel.
OSCARBIDE MGMN200 Carbide Grooving Inserts Multilayer Coated CNC Carbide Turning Inserts Lathe Inserts for MGEHR/MGIVR Lathe Grooving Cut-Off Tool,10 Pieces/Pack
OSCARBIDE TOOLS
- Size:Turning Inserts MGMN200 6mm x 3mm x 2mm
- Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance
- Designed for Steel, cast iron and non-ferrous materials
- Fit for MGEHR / MGIVR grooving cut-off tool.
- 10pcs With a plastic box for convenient storage
Product features
Size:
6mm x 3mm x 2mm
Feature:
Designed for Steel, cast iron and non-ferrous materials
Used for turning and finishing on a wide range of materials
Fit for: MGEHR/MGIVR Grooving Cut-Off Tool
Noite:Solid carbide Insertsare more brittle than other substrates, and must be used with rigid tool holding systems
GBJ 10pcs SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts
GBJ
- GBJ-1 10pcs SP200 NC3020 GTN-2 Grooving Cut-Off Carbide Inserts
User questions & answers
| Question: | What are the dimensions of this item? width of cut |
| Answer: | .750 approximately with you keeping tool lubricated often with slow feed .cleaning out the groove your making with it. |
Product features
ASIN: B08D6M9PSG
Our aim is to make you enjoy the lowest market p rice, best quality by the market!
ASIN: B06XTX6J99
We have our own production equipment Custom production accepted Quality assuranc e Lowest p rice！
ASIN: B08CN9XD91
CNMM1906024
The quality better than the famous brands in Japan and Korea
ASIN: B08DFSYBWD
All kinds of tool holders, Factory direct sales of goods are definitely value for money!
OSCARBIDE Carbide Grooving Inserts GTN-2(QC1402) Multilayer Coated CNC Lathe Carbide Inserts Cutters for Lathe Grooving Cut-Off Tool,5 Pieces/Pack
OSCARBIDE TOOLS
- GTN-2(QC1402) Width: 0.079"
- Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance
- For cut-off and grooving
- For cutting all steel and stainless steels and non-ferrous materials
- 5pcs With a plastic box for convenient storage
Product features
Feature:
Designed for Stainless Steel, Steel, cast iron and non-ferrous materials
Fit for:Grooving Cut-Off Tool
Noite:Solid carbide Insertsare more brittle than other substrates, and must be used with rigid tool holding systems
1/2" Indexable Grooving Parting Holder
This is carbide inserts fit our Grooving Parting Holder , please search Asin B07S6N1QB5 to buy it.
3/8"x1/2" Indexable Grooving Parting Holder
This is carbide inserts fit our Grooving Parting Holder , please search Asin B07YXL92F6 to buy it.
OSCARBIDE GTN-2(QC1402) Carbide Grooving InsertsMultilayer Coated CNC Lathe Carbide Cutters Inserts for Lathe Grooving Cut-Off Tool,10 Pieces/Pack
OSCARBIDE TOOLS
- GTN-2(QC1402) Width: 0.079"
- Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance
- For cut-off and grooving
- For cutting all steel and stainless steels and non-ferrous materials
- 10pcs With a plastic box for convenient storage
Product features
Feature:
Designed for Stainless Steel, Steel, cast iron and non-ferrous materials
Fit for:Grooving Cut-Off Tool
Noite:Solid carbide Insertsare more brittle than other substrates, and must be used with rigid tool holding systems
1/2" Indexable Grooving Parting Holder
This is carbide inserts fit our Grooving Parting Holder , please search Asin B07S6N1QB5 to buy it.
3/8"x1/2" Indexable Grooving Parting Holder
This is carbide inserts fit our Grooving Parting Holder , please search Asin B07YXL92F6 to buy it.
Shars GTN-3 Tin Coated Carbide Cut-Off & Grooving Insert 10pcs, GTN-3 404-0421(10) P{
Shars
- Insert Style: GTN-3
- Insert Grade: C5
- Insert Width: 0.12"
- Cutting Direction: Neutral
- Coating: Tin
Product features
Shars Tool Cut-Off & Grooving Insert
- APPLICATION: Grooving
- INSERT STYLE: GTN
- INSERT GRADE: C5
- MATERIAL: Carbide
- COATING: Tin
- CUTTING DIRECTION: Neutral
Features
- 0 degree lead angle
- High reliability
- High rigidity
- Increased stability
- Superior straightness of cut
- For cut-off and grooving, Single-sided notation, TiN coated for extra strength at higher speeds.
- Grade C-6 is a general purpose grade for cutting all steel and stainless steels.
OSCARBIDE GTN-4(QC1404) Carbide Grooving Inserts Multilayer Coated CNC Lathe Inserts Carbide Cutters for Lathe Grooving Cut-Off Tool,5 Pieces/Pack
OSCARBIDE TOOLS
- GTN-4(QC1404) Width: 4.1mm(0.161")
- Material: made of solid carbide with multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance
- For cut-off and grooving
- For cutting all steel and stainless steels and non-ferrous materials
- 5pcs With a plastic box for convenient storage
Product features
Feature:
Designed for Stainless Steel, Steel, cast iron and non-ferrous materials
Fit for:Grooving Cut-Off Tool
Noite:Solid carbide Insertsare more brittle than other substrates, and must be used with rigid tool holding systems
FomaSP MGMN300-M CNC Grooving Carbide Inserts Steel Fit for MGEHR/MGIVR Lathe Grooving Cutting Tools 10pcs
FM
Product description
Model: MGMN300-M
ANSI #: MGMN300
ISO #: MGMN300
Nose Angle: -
Longth(L): 21mm
Width(B): 3mm
Thickness(S): 4.8mm
Dimension(D)：2.35mm
Radius(R): 0.4mm
Material: Carbide
Coating: PVD coating
Machining Material: Steel, Stainless steel, Cast iron
Machining Process: Semi-finishing
Insert Grade: SP2125
ISO Grade Classification: P20(P10-P25)
Chip Breaker: M
1 Pack/10 Pieces
Brand: FomaSP
- Black colors PVD coating, good for working steel, stainless steel, cast iron
- Size, Width(B): 3mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 2.35mm, Thickness(S): 4.8mmSize, Width(B): 3mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 2.35mm, Thickness(S): 4.8mm
- General chipbreaker for semi-finishing working, with better chip breaker, good material and more efficiency
- Long processing life, competitive price, high cost performance
- Has more than 15 years of experience in producing carbide inserts
FomaSP GTN-3 (SP300) CNC Grooving Carbide Inserts Steel Fit for SPB326 Lathe Grooving Cutting Tools 10pcs
I-SP300
Product description
Model: SP300
ANSI #: SP300
ISO #: BP300
Nose Angle: -
Longth(L): 11.3mm
Width(B): 3.1mm
Thickness(S): -
Dimension(D)：-
Radius(R): 0.2mm
Material: Carbide
Coating: PVD coating
Machining Material: Steel, Stainless steel, Cast iron
Machining Process: Semi-finishing
Insert Grade: SP2125
ISO Grade Classification: P20(P10-P25)
Chip Breaker: -
1 Pack/10 Pieces
Brand: FomaSP
- Black colors PVD coating, good for working steel, stainless steel, cast iron.
- Size, Width(B): 3.1mm, Radius(R): 0.2mm, Longth(L): 11.3mm, fit for Korloy grooving holder.
- General chipbreaker for semi-finishing working, with better chip breaker, good material and more efficiency
- Long processing life, competitive price, high cost performance
- Has more than 15 years of experience in producing carbide inserts
GBJ 10pcs MGMN200-G NC3030 Carbide Grooving Inserts for MGEHR/MGIVR Turning Tool Holder
GBJ
Product description
Material:
Made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance
Feature:
Designed for Steel, cast iron and non-ferrous materials
Used for turning and finishing on a wide range of materials
Fit for: MGEHR/MGIVR Grooving Cut-Off Tool
Notice:Solid carbide Inserts are more brittle than other substrates, and must be used with rigid tool holding systems
- Model ：MGMN200-G NC3030
- Material:Made of solid carbide with tin coated
- Fit for: MGEHR/MGIVR Grooving Cut-Off Tool
- Used for： turning and finishing on a wide range of materials
- Features: offer long tool life and faster cutting speed, low friction coefficient, good wear resistance
Latest Reviews
View all
Fireplace Cover For Babies
- Updated: 06.06.2023
- Read reviews
Home Stereo Receivers
- Updated: 03.05.2023
- Read reviews
Gai Lans
- Updated: 26.04.2023
- Read reviews
Rosewill Fans
- Updated: 21.07.2023
- Read reviews
Pc Steering Wheel
- Updated: 19.05.2023
- Read reviews