13 best commercial electromagnetic locks

Product description

Describe:

It is mainly used for customers that do not want to physically get up and open the door. With this system, you will be able to let people in by clicking on the RF remote. The remote communicates with the receiver, which can program up to 50 remotes, and it has a range of 100 feet.

The function of the receiver is that when the power is on, the mag lock of your kit is locked and when you press the remote the mag lock will unlock temporarily to open the door.

0/3/6/9 seconds autolock time delay adjustable, default is 3 seconds

This magnetic lock system also brings an exit button that will allow you to exit from the inside of the door.

Magnetic Lock:

Input Voltage: 12VDC

Current: 500mA

Holding: 280kg / 600Lbs

NC mode - (Unlocked while power is removed), fail safe

Size: 250Lx48.5Wx25H(mm) / 11Lx1.9Wx0.98H(inch)

Remote:

Voltage: 12VDC

Frequency: 433MHz

DC Encoding Type: Learning code

Firing Range: 100 meter(open) in theory, 15%-30% in reality

Battery: 12V/27A

Adjustable Locking Delay: 0/3/6/9sec

Exit Button:

Dimensions: 90Lx35Wx31H(mm)/ 3.54Lx1.38Wx1.22H(inch)

Current Rating: 3A@36VDC Max

Output Contact: NO/COM

Suitable for hollow door

Adapter:

Input: 100-240VAC 50/60Hz

Output: 12VDC / Max1.2A

Package:

1 x Lock

1 x Remote receiver

2 x Remote transmitter

1 x Exit button

1 x Adapter

• ✅The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits. The remote communicates with the receiver, which can program up to 40 remotes, and it has a range of 164 feet.
• ✅Magnetic lock with UL Listed; (Fail-safe: Unlocked while power is removed)
• ✅The remote communicates with the receiver to let people in
• ✅0/5/10 seconds locking delay time adjustable, default is 5 seconds
• ✅An exit button is included in this magnetic lock system kit, and you could exit from indoors easily by pushing it once.

User questions & answers

Question:	Can I use this to open the doors on my bus? Wire it to the existing electronic mechanism so I can use the key fob to open the doors from outside
Answer:	No you need a Solenoid hooked up inside the door to pull the latch that opens the door if your trying to make it keyless , like a pop a door kit on a car
Question:	can you hook up a battery back up incase power outage
Answer:	If you wire a 12v battery rather than the power supply you can run a battery backup, then just put a 12v battery tinder to keep your 12V charged, I'd get a little motorcycle or generator battery. They are about $40
Question:	How to mount
Answer:	Depends on type of door. I would recommend the mounting bracket
Question:	Se puede pegar a la puerta sives de vidrio
Answer:	Este soporte no es adecuado para puertas de vidrio, se recomienda obtener un elemento de seguimiento que sea adecuado para puertas de vidrio: https://www.amazon.com/dp/B077D1374H?ref=myi_title_dp https://www.amazon.com/dp/B07JM8FGH6?ref=myi_title_dp
Question:	Will this work outdoors
Answer:	They should work any where they'll fit. I'm using one on a shed outside. I was thinking these were stainless, but if they're plated they'll eventually rust. But they are quite heavy, so the only effect the rust will have will be cosmetic.
Question:	Whats the dinmmension between screw holes
Answer:	I didn't pay attention because this strike needed new screw holes (it covered up the old ones).
Question:	What are the dimensions of the opening? Thanks
Answer:	It is 2 3/4" high x 3/4" wide. Hope this helps you. Finish that I received was satin nickle color.
Question:	What is the width of the plate where the tongue is
Answer:	from edge to edge, it's two inches which is the same as a standard strike plate. These work great in my house which tends to shift with weather changes (heavy clay soil).

Product features

Remote Control:

• Voltage: 12VDC
• Frequency: 433MHz
• RF channels: One
• No. of Remotes that are able to connect to one Receiver: Up to 40
• DC Encoding Type: Learning code
• Working Range: 160ft in open aera, 15%-30% in reality
• Adjustable Locking Delay: 0/5/10sec
• Wordking Mode: Momentary/Toggle/Latched

Push to Exit Button:

• Dimensions: 90Lx35Wx26.5H(mm) / 3.54Lx1.38Wx1.04H(inch)
• Standard Structure: Stainless steel Panel, Steel Button
• Mechanical Life: 500000 tested
• Current Rating: 3A@36VDC Max
• Output Contact: NO/COM
• Operating Temp: 10～+55℃(14-131F)
• Operating Humidity: 0-95% (relative humidity)
• Panel Material: Stainless steel Panel, Wire Drawing Finished
• Suitable for hollow door

Electric Magnetic Lock:

• UL Listed with the US and Canada
• Collinear Load Test 280kg / 600pounds
• Output Contact: NO/NC/COM
• LED: Red shows locked; Green shows unlocked
• MOV Provides Reverse Current Protection
• Cover Finish: Anodized aluminum
• Lock Finish: Zinc
• Armature Plate Finish: Zinc

Power Adapter:

• Type: 12V 1A Power Supply Wall Charger
• Input: AC100V-240V 50/60Hz
• Max Output: DC12V / 1A (1000mA)
• AC Cord length: 4 feet / 1.2 meter
• Wire Type: 22AWG
• Output transformer adapter : 5.5X2.1mm (Inside diameter 2.1mm, Outside diameter 5.5mm)
• Net weight: 66g / 2.3oz
• Certificate: FCC, UL

Package:

• 1 x Electric Magnetic Lock
• 1 x Remote Receiver
• 2 x Remote Transmitters
• 1 x Push to Exit Button
• 1 x Power Adapter
• 1 x Buzzer
• 1 x English Manual

Wiring Diagram:

• Clear Code: Press and hold the RF-KEY for 8 seconds until the indicator changes from green to red, indicating the clear code is successful.
• Pairing Transmitter and Receiver: Press the RF-KEY on the receiver once, the indicator on it will flash green once. Then press the button on the transmitter within 20 seconds, the LED indicator on the receiver will flash green three times to indicate the pairing is successful.

Product description

The Seco-Larm Electromagnetic Lock secure mounts to your point of entry, keeping your door securely with up to 1200 pounds of holding force closed until you release the powerful magnet manually through your hardwired security system or via remote control.

• 12VDC or 24VDC power keeps heavy-duty magnetic lock closed
• Manually release lock through a security system or remote control
• 1200 pound holding force capacity
• All mounting hardware included

User questions & answers

Question:	What size wire should be used to connect the power supply to the lock
Answer:	18 gauge wire is fine unless it is a long run than go to 16 gauge stranded is best
Question:	Is this suitable for an outdoor installation like a garden gate
Answer:	Yes, but the incoming wires has to be covered and you will have to seal the edges on the unit. I think this unit is a little too powerful for a garden gate.
Question:	It any other door electromanegnetic powerfull than 1,200 lbs
Answer:	The standard holding forses are 600 lbs and 1200 lbs. 1200 lbs is a very strong holding forse and feel it is more than adequate to hold in any situation.
Question:	how do you wire this electromagnetic lock
Answer:	All you need is a 12VDC or 24VDC power supply (depends on the model you buy), I would recommend at least capable of putting out 1A. As long as the power is supplied, the lock will be held closed. You can put in a switch between the power supply and the lock to control on/off. If you want to install a pin keypad or keyless remote entry then you will have to buy a separate kit for that... But essentially the same concept, they will provide constant 12VDC to the lock holding it closed until you enter a key releasing the lock for few seconds.

Product description

Describe:

It is mainly used for customers that do not want to physically get up and open the door. With this system, you will be able to let people in by clicking on the RF remote. The remote communicates with the receiver, which can program up to 20 remotes, and it has a range of 100 feet.

The function of the receiver is that when the power is on, the lock of your kit is locked and when you press the remote the lock will unlock temporarily to open the door.

Transmits data to a cloud platform through the Wi-Fi Router, which enables you to remotely control the connected appliances, via free eWeLink App.You can download the iOS version in App Store and the Android version in Google Play.

Share control with your family and friends. Also you can DIY set this by yourself easy handling and can be activated immediately and stably.

TIMING FUNCTION: Another feature available if to set timing schedules for the appliances, which can include countdown, scheduled on/off. It’s simple, giving you one less thing to worry about in your busy life.

This magnetic lock system also brings an exit button that will allow you to exit from the inside of the door.

Magnetic Lock:

Input Voltage: 12VDC

Current: 500mA

Holding: 600Lbs

Fail seafe (Unlocked when power is removed)

Size: 11Lx1.9Wx0.98H(inch)

WIFI Remote:

Voltage: 12VDC

Frequency: 433MHz

DC Encoding Type: Learning code

Standard: Wi-Fi 2.4GHz

Firing Range: 100 feet (open) in theory, 15%-30% in reality

Exit Button:

Dimensions: 3.54Lx1.38Wx1.22H(inch)

Current Rating: 3A@36VDC Max

Output Contact: NO/COM

Suitable for hollow door

Adapter:

Input: 100-240VAC 50/60Hz

Output: 12VDC / Max1.2A

Package:

1 x Lock

1 x Remote receiver

2 x Remote transmitter

1 x Exit button

1 x Adapter

• The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits.
• EASY USE: Transmits data to a cloud platform through the Wi-Fi Router, which enables you to remotely control the connected appliances, via free eWeLink App.You can download the iOS version in App Store and the Android version in Google Play.
• SHARE CONTROL: Share control with your family and friends. Also you can DIY set this by yourself easy handling and can be activated immediately and stably.
• TIMING FUNCTION: Another feature available if to set timing schedules for the appliances, which can include countdown, scheduled on/off. It’s simple, giving you one less thing to worry about in your busy life.
• An exit button is included in this magnetic lock system kit, and you could exit from indoors easily by pushing it once.

User questions & answers

Question:	No success. After installing no power to the magnet. The power supply goes out and makes a faint beeping noise. Switch powers on if i disconnect red
Answer:	This issude may not installed correct, please refer to the wiring video below. https://www.amazon.com/vdp/261258a55cca4ff38a2f02d48106416c
Question:	Why does it say connect positive to NC, when it only works if the negative is connected
Answer:	as the NC is for the singal control for the lock, it can't work if only connected the negative. thanks.
Question:	I have sent a couple of requests to get a recommendation and you ask me to submit pictures.Can you provide an email address as pics won't upload
Answer:	Please open this link: https://www.amazon.com/sp?_encoding=UTF8&asin=B07L4N263N&isAmazonFulfilled=0&ref_=olp_merch_name_2&seller=AKPZCSJWAOJ6N, then click "Ask a question", and then send the message and pictures to us. Thanks.
Question:	How can I change the suction，the 600lbs one is eash to open up when we conect power on
Answer:	There is a adjustment screw on the armature plate, and you could adjust the holding force by this screws. Besides, the screw of armature plate should not be fixed too tight. Proper elasticity should be guraranteed for the rubber ring so that the armature plate can adjust itself to the appropriate position. Please keep the surface of the lock clean, or the force will be reduced because of the dust, glue or scotch tape on it. Thanks.

Product features

WI-FI Remote Control:

• Wi-Fi Standard: 2.4GHz (Can't support 5GHz)
• Voltage: 12VDC
• RF Frequency: 433MHz
• Load: Max. 1000W
• Standby Current: <0.1W
• Working Mode: Momentary/Toggle
• DC Encoding Type: Learning code
• Adjustable Locking Delay: 0/5/10sec
• Firing Range: 160 feet(open) in theory, 15%-30% in reality
• No. of Transmitters that are able to connect to one Receiver: Up to 40

eWeLink APP Instruction:

1. Download “eWeLink” app in APP Store for iOS or in Google play for Android
2. Cut off the power before installing the device. Then power it up after completing the installation
3. Press and hold the WIFI-KEY 5 seconds until the green LED flashing fast
4. The APP will auto-search and connect access control keypad around you
5. Input home WiFi SSID & password. (If no password, keep it blank)
6. eWelink will search the device and add it to your account, it takes 1-3 minutes.When this complete,you can give your device a name

Electric Magnetic Lock:

• Input Voltage: 12VDC
• Current: 500mA
• Holding Force: 280Kg/600Lbs
• Output Contact: NO/NC/COM; LED: Red shows locked; Green shows unlocked
• Lock Size: 250Lx48.5Wx25H(mm) / 9.84"x1.91"x0.98"
• Armature Plate Size: 180Lx38Wx11H(mm) / 7.09"x1.5"x0.43"
• Suitable: Wooden door, Glass door, Metal door, Fireproof door
• Cover Finish: Anodized aluminum
• Lock Finish: Zinc
• Armature Plate Finish: Zinc

Push to Exit Button:

• Dimensions: 90Lx35Wx26.5H(mm) / 3.54Lx1.38Wx1.04H(inch)
• Standard Structure: Stainless steel Panel, Steel Button
• Mechanical Life: 500000 tested
• Current Rating: 3A@36VDC Max
• Output Contact: NO/COM
• Operating Temp: 10～+55℃(14-131F)
• Operating Humidity: 0-95% (relative humidity)
• Panel Material: Stainless steel Panel, Wire Drawing Finished
• Suitable for hollow door

Adapter:

• Type: 12V 1A Power Supply Wall Charger
• Input: AC100V-240V 50/60Hz
• Max Output: DC12V / 1A (1000mA)
• AC Cord length: 4 feet / 1.2meter
• Wire Type: 22AWG
• Output transformer adapter : 5.5X2.1mm (Inside diameter 2.1mm, Outside diameter 5.5mm)
• Net weight: 66g / 2.3oz
• Certificate: FCC, UL

Package:

• 1 x Electromagnetic lock
• 1 x Remote receiver
• 2 x Remote transmitters
• 1 x Exit button
• 1 x UL listed adapter
• 1 x Buzzer
• 1 x English manual

Wiring Diagram:

• Clear Code: Press and hold the RF-KEY for 8 seconds until the indicator changes from green to red, indicating the clear code is successful.
• Pairing Transmitter and Receiver: Press the RF-KEY on the receiver once, the indicator on it will flash green once. Then press the button on the transmitter within 20 seconds, the LED indicator on the receiver will flash green three times to indicate the pairing is successful.

Product description

Describe:

The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits. The remote communicates with the receiver, which can program up to 40 remotes, and it has a range of 160 feet.

The function of the receiver is that when the power is on, the lock of your kit is locked and when you press the remote the lock will unlock temporarily to open the door.

Transmits data to a cloud platform through the Wi-Fi Router, which enables you to remotely control the connected appliances, via free eWeLink App.You can download the iOS version in App Store and the Android version in Google Play.

Share control with your family and friends. Also you can DIY set this by yourself easy handling and can be activated immediately and stably.

An exit button is included in this magnetic lock system kit, and you could exit from indoors easily by pushing it once.

Magnetic Lock:

Input Voltage: 12VDC

Current: 500mA

Holding: 600Lbs

Fail safe (Unlocked when power is removed)

Size: 250Lx48.5Wx25H(mm) /9.84Lx1.91Wx0.98H(inch)

WIFI Remote:

Voltage: 12VDC

Frequency: 433MHz

DC Encoding Type: Learning code

Standard: Wi-Fi 2.4GHz

Firing Range: 160 feet (open) in theory, 15%-30% in reality

Working Mode: Momentary/Toggle

Exit Button:

Dimensions: 90Lx35Wx26.5H(mm)/3.54Lx1.38Wx1.04H(inch)

Current Rating: 3A@36VDC Max

Output Contact: NO/COM

Suitable for hollow door

Adapter:

Input: 100-240VAC 50/60Hz

Output: 12VDC / Max1.2A

Package:

1 x Lock

1 x Bracket

1 x Remote receiver

2 x Remote transmitter

1 x Exit button

1 x Adapter

• The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits.
• EASY USE: Transmits data to a cloud platform through the Wi-Fi Router, which enables you to remotely control the connected appliances, via free eWeLink App.You can download the iOS version in App Store and the Android version in Google Play.
• SHARE CONTROL: Share control with your family and friends. Also you can DIY set this by yourself easy handling and can be activated immediately and stably.
• TIMING FUNCTION: Another feature available if to set timing schedules for the appliances, which can include countdown, scheduled on/off. It’s simple, giving you one less thing to worry about in your busy life.
• An exit button is included in this magnetic lock system kit, and you could exit from indoors easily by pushing it once.

User questions & answers

Question:	How may remote control can be program use with this kit
Answer:	No limit you can program as many as you like.
Question:	Can additional push to exit buttons be wired together and added for outside the room access and hidden somewhere
Answer:	Yes, I wired an additional release button in a additional hidden location
Question:	Can a second magnetic lock be installed to make the lock extra secure
Answer:	Not sure exactly what you mean but yes you could install a second lock. Getting in would require both locks to be release simultaneously or I bet you could splice 2 locks into one controller.
Question:	I'm trying to install my lock today but it does not work. With a voltmeter I see 2.5v on the wires to the push button but zero on wires to the lock
Answer:	On the side of the controller is a small switch with the label "lock mode." Try flipping this switch to the other position. If this doesn't help, you may have a faulty controller.

Product features

WI-FI Remote Control:

• Wi-Fi Standard: 2.4GHz (Can't support 5GHz)
• Voltage: 12VDC
• RF Frequency: 433MHz
• Load: Max. 1000W
• Standby Current: <0.1W
• Working Mode: Momentary/Toggle
• DC Encoding Type: Learning code
• Adjustable Locking Delay: 0/5/10sec
• Firing Range: 160 feet(open) in theory, 15%-30% in reality
• No. of Transmitters that are able to connect to one Receiver: Up to 40

eWeLink APP Instruction:

1. Download “eWeLink” app in APP Store for iOS or in Google play for Android.
2. Cut off the power before installing the device. Then power it up after completing the installation.
3. Press and hold the WIFI-KEY 5 seconds until the green LED flashing fast.
4. The APP will auto-search and connect access control keypad around you.
5. Input home WiFi SSID & password. (If no password, keep it blank)
6. eWelink will search the device and add it to your account, it takes 1-3 minutes. When this complete,you can give your device a name.

Electric Magnetic Lock:

• Input Voltage: 12VDC
• Current: 500mA
• Holding Force: 280Kg/600Lbs
• Output Contact: NO/NC/COM; LED: Red shows locked; Green shows unlocked
• Lock Size: 250Lx48.5Wx25H(mm) / 9.84"x1.91"x0.98"
• Armature Plate Size: 180Lx38Wx11H(mm) / 7.09"x1.5"x0.43"
• Suitable: Wooden door, Glass door, Metal door, Fireproof door
• Cover Finish: Anodized aluminum
• Lock Finish: Zinc
• Armature Plate Finish: Zinc

Push to Exit Button:

• Dimensions: 90Lx35Wx26.5H(mm) / 3.54Lx1.38Wx1.04H(inch)
• Standard Structure: Stainless steel Panel, Steel Button
• Mechanical Life: 500000 tested
• Current Rating: 3A@36VDC Max
• Output Contact: NO/COM
• Operating Temp: 10～+55℃(14-131F)
• Operating Humidity: 0-95% (relative humidity)
• Panel Material: Stainless steel Panel, Wire Drawing Finished
• Suitable for hollow door

Adapter:

• Type: 12V 1A Power Supply Wall Charger
• Input: AC100V-240V 50/60Hz
• Max Output: DC12V / 1A (1000mA)
• AC Cord length: 4 feet / 1.2meter
• Wire Type: 22AWG
• Output transformer adapter : 5.5X2.1mm (Inside diameter 2.1mm, Outside diameter 5.5mm)
• Net weight: 66g / 2.3oz
• Certificate: FCC, UL

Package:

• 1 x Electromagnetic lock
• 1 x Bracket for ock
• 1 x Remote receiver
• 2 x Remote transmitters
• 1 x Exit button
• 1 x Power adapter
• 1 x Buzzer
• 1 x English manual

Wiring Diagram:

• Clear Code: Press and hold the RF-KEY for 8 seconds until the indicator changes from green to red, indicating the clear code is successful.
• Pairing Transmitter and Receiver: Press the RF-KEY on the receiver once, the indicator on it will flash green once. Then press the button on the transmitter within 20 seconds, the LED indicator on the receiver will flash green three times to indicate the pairing is successful.

Product description

Describe:

It is mainly used for customers that do not want to physically get up and open the door. With this system, you will be able to let people in by clicking on the RF remote. The remote communicates with the receiver, which can program up to 20 remotes, and it has a range of 100 feet.

The function of the receiver is that when the power is on, the lock of your kit is locked and when you press the remote the lock will unlock temporarily to open the door.

Transmits data to a cloud platform through the Wi-Fi Router, which enables you to remotely control the connected appliances, via free eWeLink App.You can download the iOS version in App Store and the Android version in Google Play.

Share control with your family and friends. Also you can DIY set this by yourself easy handling and can be activated immediately and stably.

Attention: The exit button doesn’t bring a delay, it mean you have to press the exit button at the same time for open the door

Magnetic Lock:

Input Voltage: 12VDC

Current: 420mA

Holding: 1200Lbs

Fail seafe (Unlocked when power is removed)

Size: 265Lx71.8Wx38.8H(mm) / 10.43Lx2.83Wx1.53H(inch)

WIFI Remote:

Voltage: 12VDC

Frequency: 433MHz

DC Encoding Type: Learning code

Standard: Wi-Fi 2.4GHz

Firing Range: 100 feet (open) in theory, 15%-30% in reality

Work Mode: Momentary/Toggle

Exit button:

Dimensions: 90Lx35Wx26.5H(mm) / 3.54Lx1.38Wx1.04H(inch)

Current Rating: 3A@36VDC Max

Output Contact: NO/COM

Suitable for hollow door

Adapter:

Input: 100-240VAC 50/60Hz

Output: 12VDC / Max1.2A

Package:

1 x Lock

1 x Remote receiver

2 x Remote transmitter

1 x Exit button

1 x Adapter

• The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits.
• EASY USE: Transmits data to a cloud platform through the Wi-Fi Router, which enables you to remotely control the connected appliances, via free eWeLink App.You can download the iOS version in App Store and the Android version in Google Play.
• SHARE CONTROL: Share control with your family and friends. Also you can DIY set this by yourself easy handling and can be activated immediately and stably.
• TIMING FUNCTION: Another feature available if to set timing schedules for the appliances, which can include countdown, scheduled on/off. It’s simple, giving you one less thing to worry about in your busy life.
• An exit button is included in this magnetic lock system kit, and you could exit from indoors easily by pushing it once.

User questions & answers

Question:	What is your warrant on magnetic locks
Answer:	We provide 1 year warrant the system. Thanks.
Question:	Can I install the app and control this on more than 1 device
Answer:	This system could controlled by app, and the app could control more than 1 device. Thanks.
Question:	does this system have a backup battery when the power fails
Answer:	Sorry, it can't support the backup battery. Thanks.
Question:	can i use the z and L bracket on an outward door
Answer:	Could get the Z and L bracket via below link: https://www.amazon.com/dp/B01LXCR7RA?ref=myi_title_dp

Product features

WI-FI Remote Control:

• WIFI Standard: Wi-Fi 2.4GHz
• Voltage: 12VDC
• RF Frequency: 433MHz
• Standby Current: <0.1W
• Work Mode: Momentary / Toggle
• DC Encoding Type: Learning code
• Firing Range: 164 feet(open) in theory, 15%-30% in reality
• No. of Transmitters that are able to connect to one Receiver: Up to 40
• Material of Shell: ABS plastic

eWeLink APP Instruction:

1. Download “eWeLink” app in APP Store for iOS or in Google play for Android
2. Cut off the power before installing the device. Then power it up after completing the installation
3. Press and hold the WIFI-KEY 5 seconds until the green LED flashing fast
4. The APP will auto-search and connect access control keypad around you
5. Input home WiFi SSID & password. (If no password, keep it blank)
6. eWelink will search the device and add it to your account, it takes 1-3 minutes.When this complete,you can give your device a name

Electric Magnetic Lock:

• Lock Body Size: 265Lx71.8Wx38.8H(mm) / 10-7/16" x 2-53/64" x 1-17/32"
• Armature plate: 185Lx60Wx13H(mm) / 7-9/32" x 2-23/64" x 33/64"
• Holding Force: 500kg / 1200lb
• Voltage: 12VDC/500mA
• LED: Red indicates the door is unlock, Green indicates the door is lock
• Suitable for: Wooden door, Glass door, Metal door, Fireproof door
• Operating Temp: -10℃~+55℃(14℉-131℉)
• Finishes for Shell: Anodized aluminum
• Finishes for Magnetic: Zinc
• Finishes for Armature: Zinc

Push to Exit Button:

• Dimensions: 90Lx35Wx26.5H(mm) / 3.54Lx1.38Wx1.04H(inch)
• Standard Structure: Stainless steel Panel, Steel Button
• Mechanical Life: 500000 tested
• Current Rating: 3A@36VDC Max
• Output Contact: NO/COM
• Operating Temp: 10～+55℃(14-131F)
• Operating Humidity: 0-95% (relative humidity)
• Panel Material: Stainless steel Panel, Wire Drawing Finished
• Suitable for hollow door

Adapter:

• Type: 12V 1A Power Supply Wall Charger
• Input: AC100V-240V 50/60Hz
• Max Output: 12VDC/1A (1000mA)
• AC Cord length: 4 feet / 1.2meter
• Wire Type: 22AWG
• Output transformer adapter : 5.5X2.1mm (Inside diameter 2.1mm, Outside diameter 5.5mm)
• Net weight: 66g / 2.3oz

Package:

• 1 x Electromagnetic lock
• 1 x Remote receiver
• 2 x Remote transmitters
• 1 x Exit button
• 1 x Buzzer
• 1 x Power adapter
• 1 x English manual

Wiring Diagram:

• Clear Code: Press and hold the RF-KEY for 8 seconds until the indicator changes from green to red, indicating the clear code is successful.
• Pairing Transmitter and Receiver: Press the RF-KEY on the receiver once, the indicator on it will flash green once. Then press the button on the transmitter within 20 seconds, the LED indicator on the receiver will flash green three times to indicate the pairing is successful.

• This kit is a one door 600lbs Magnetic lock kit for doors that open out. ​This is for indoor applications. It is mainly used for customers that do not want to physically get up and open the door. With this system, you will be able to let people in by clicking on the RF remote. The remote communicates with the receiver, which can program up to 50 remotes, and it has a range of 300 feet (open space)
• When the power is on, the magnetic lock will lock the door with 600lb holding force; when you press the remote transmitter button, the magnetic lock will unlock to open the door and let people in
• External Buzzer: Mini External Buzzer for access control Lock systems. Buzzer sounds informing you your magnetic lock is unlocked
• This magnetic lock system also brings an exit button that will allow you to exit from the inside of the door. ▶▶ Keep in mind that this exit button does not bring a delay meaning that you would have to press the exit button at the same time that you open the door.
• Electromagnetic door lock systems are commonly used in convenience stores, pawn shops, gas stations, office buildings and other small businesses

User questions & answers

Question:	how about the wifi ther connect to the router work them both
Answer:	after a couple attempts to get wifi connected and wireless latch release fob work great
Question:	Can I purchase remote separately
Answer:	We are sorry we don't sell this remote seperately.
Question:	Hi
Answer:	We are sorry that we don’t have an installation video now. Here is the wiring diagram link of this access control kit, please check it: https://images-na.ssl-images-amazon.com/images/I/61sDpS62FwL._AC_SL1465_.jpg
Question:	Do you provide a API service
Answer:	We are sorry we don't provide that.

Product features

Magnetic Lock:

• Holding Force: 600lbs
• Voltage: DC12V
• Current: 380-430mA
• Working Temperature: 14°F~131°F
• Humidity: 0 to 95%
• Cover Finish: Anodized aluminum
• Lock Finish: Zinc
• Armature Plate Finish: Zinc
• Lock Size(LxWxH): 9-27/32″ x 1-27/32″ x 63/64″
• Plate Size: 7-3/32″ x 1-17/32″ x 7/16″

Exit Button:

• Material: Hard plastic
• Contact Output: NO/NC/COM
• Power Rating: DC 36V/3A
• Size: 3-5/32″ x 1-49/64″ x 19/32″
• Product weight: 1.06oz

Adapter:

• Input: 100-240VAC 50/60Hz
• Output: 12VDC / Max1.2A

Remote Receiver:

• Operating voltage: DC12V
• Load power: 1000W max.
• WIFI Standard: 2.4Ghz
• Operating frequency: 433MHz
• Receiving sensitivity: -105dbm
• Frequency deviation: ± 0.2MHz
• Coding method: Learning type
• Working mode: Jog, self-locking, interlocking

Remote Transmitter:

• Operating voltage: DC6V
• Operating frequency: 433MHz
• Modulation method: ASK
• Remote distance: 328ft (open space)

Mini Buzzer:

• Frequency: 400Hz
• Sound: 75dB
• Working voltage: DC12V
• Working current: 25mA

Product description

UnLatch is for any application where an electric strike would be used for a cylindrical/tubular lockset. UnLatch supports full dead latch function, releases under pressure and includes a latch status monitoring output.

• No cutting or altering of the jamb required
• Fits standard ANSI 4-7/8" strike cutout
• Motorized, no solenoids
• Fully concealed installation
• Maintains deadlatch function at all times

Product description

Seco-Larm E-946FC-600Q Electromagnetic Gate Lock, 600-lb Holding Force, Face or Surface Mount For Indoor and Outdoor Applications, Water Resistant and Vandal Resistant

Key Features

• Face and side (surface) mounting
• For indoor & outdoor applications
• For sliding or swinging gates
• Water resistant and vandal resistant
• Maintenance-free, factory-sealed design
• Dual-threaded conduit fitting
• Attractive stainless-steel housing
• 3ft (91cm) Hookup cord
• Dual voltage: 12/24 VDC Operation
• No residual magnetism
• MOV Surge protection
• Fail-Safe operation - unlocks on power loss
• Complete mounting hardware included
• L and "Z" brackets available

Specifications

• Holding Force: 600-lb (272kg)
• Operating Voltage: 12VDC or 24VDC ±10%
• Current Draw: 500mA@12VDC, 250mA@24VDC
• Operating Temperature: 14º~131º F (-10º~55º C)
• Electromagnet Dimensions: 8" x 1-11/16" x 1-9/16" (203 x 43 x 40 mm)
• Armature Dimensions: 7-1/4" x 1-5/8" x 9/16" (184 x 41 x 14 mm)
• Weight: 6-lb (2.7kg)

Product description

Elock (Electric Magnetic Door Lock) 600lbs

Are renown with its excellent holding force and the remarkable features. Manufactured with the highest grade of copper wire that would prevent burnout over intensive use. to achieve the commitment to customer who always satisfied with maximum quality and reliability.

Spec Sheet

• Current Consumption: 500mA/250mA
• Lock Type: Fail-safe type
• Dimension: 250(L) X 410(W) X 260(D) mm
• Armature: 170(L) X 380(W) X 110(D) mm
• LED, magnetic bond sensor
• N.O / N.C / Relay
• Holding Force:
• Up to 600 Lbs (272 Kg)
• Anti-Rust Surface Treatment:
• Operating Temperature:
• 10 to 55 degree Celsius (14 to 131 Fahrenheit)
• Humidity; 0 to 95%
• Working Mode: power-on to lock 
• Built in EXIT Push Switch Relay
• Door Open Timer Buzzer Monitoring Relay
• Reliable Holding Force
• Hall Effect Sensor Monitoring Output Relay
• Green/Red LED Indication for EM Lock Status
• Durable and Silence Operation
• Surge & Spike Protection PCB
• Anti-Tamper Jam Nuts
• Full Range of Optional Brackets
• If you need technical support please contact us, we are always available to help our customers your satisfaction is our priority

Whats in the Box:

1 Electronic Magnetic lock

1 Armature Plate

1 Bag of installation kit

An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate There are two main types of electric locking devices. Locking devices can be either "fail-safe" or "fail secure" A fail-secure locking device remains locked when power is lost. Fail-safe locking devices are unlocked when de-energized.

• An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate There are two main types of electric locking devices. Locking devices can be either "fail safe" or "fail secure" A fail-secure locking device remains locked when power is lost. Fail-safe locking devices are unlocked when de-energized. Direct pull electromagnetic locks are inherently fail-safe. in contact when the door is closed
• Holding Force: 600lbs (280kg) | Adjustable "L" bracket for outward door when the header is narrow | Adjustable "ZL" bracket for inward door application | U Bracket specially designed for glass door solution
• Operating Voltage: Dual Voltage 12V/24VDC. Current Consumption: 500mA/250mA Built-in reverse current protection device (MOV). Aluminum shell adopts high strength material, with hard anodized processing. Corrosion resistant. Good quality and durable to use. Can be opened by push button, remote controller, etc. Fit for wooden door, metal door, glass door, fireproof door, etc.
• Lock Type: Fail-safe type with Adjustable mounting bracket Push-off button on. Armature for instant release, interconnection to a system in compliance with NFPA 101 Suitable for: Wooden, Glass, Metal and Fireproof Doors. Arduino compatible lock with timer
• Dimension: 250mm x 410mm x 260mm. Armature Plate: 170(L) X 380(W) X 110(D) mm

User questions & answers

Question:	Can I plug this directly into a 240v wall socket or do I need to buy a 12v converter? And if so any recommendations
Answer:	You will need the 12/24volt transformer.

Product description

This electric magnetic lock consists of an electromagnet and an armature plate used for access control door locks. By attaching this to the door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate, holding the access control door lock shut. When power off, the door will open. It is suitable for wooden door, glass door, metal door, fire-proof door,etc.



Feature:

Use magnetic power to lock the door, 180kg(396.8lbs) holding force. Made of high strength aluminium alloy material with hard anodized processing, heat dissipation and anti-corrosion with high reliability. Secure NC mode: unlocked when power off, locked when power on. Suitable for wooden door, glass door, metal door, fire-proof door. Anti magnetic design, wear resistant material manufacturing. High quality electromagnetic material vacuum treatment, double lock body insulation treatment. Comply with environmental protection requirements, low power consumption, super quiet design, no noise during operation. Various unlocking function options: keys, manual, remote control, intelligent induction, telecontrol, and so on, directly matching with building intercom. Unique integrated design, easy installation.

Spec:

Condition: 100% Brand New

Material: Aluminium Alloy + Metal Plate

Color: Silver

Holding Force: 180kg/396.8lbs

Input Voltage: DC 12V

Operation Current: 400mA

Size: Shown as Picture

Application: wooden door, glass door, metal door, fire-proof door

Package Weight: Approx. 995g



Package list:

1 * Electromagnetic Lock

1 * Armature Plate

1 * Screws Pack

1 * User Manual



Note:

Please make a note if you need an English manual.

• Use magnetic power to lock the door, 180kg(396.8lbs) holding force.
• Made of high strength aluminium alloy material with hard anodized processing, heat dissipation and anti-corrosion with high reliability.
• Secure NC mode: unlocked when power off, locked when power on.
• Various unlocking function options: keys, manual, remote control, intelligent induction, telecontrol, and so on, directly matching with building intercom.
• Comply with environmental protection requirements, low power consumption, super quiet design, no noise during operation.

Product description

It is mainly used for customers that do not want to physically get up and open the door. With this system, you will be able to let people in by clicking on the RF remote. The remote communicates with the receiver, which can program up to 20 remotes, and it has a range of 100 feet. The function of the receiver is that when the power is on, the mag lock of your kit is locked and when you press the remote the maglock will unlock temporarily to open the door. 0/3/6/9 seconds locking delay time adjustable, default is 3 seconds This magnetic lock system also brings an exit button that will allow you to exit from the inside of the door

• It is mainly used for customers that do not want to physically get up and open the door.With this system, you will be able to let people in by clicking on the RF remote. The remote communicates with the receiver, which can program up to 20 remotes, and it has a range of 100 feet
• Magnetic lock with UL Listed; (Fail-safe: Unlocked while power is removed)
• The remote communicates with the receiver to let people in
• 0/3/6/9 seconds locking delay time adjustable, default is 3 seconds
• This magnetic lock system also brings an exit button that will allow you to exit from the inside of the door.

Product description

600 lbs. holding force maglock with field selectable dual voltage. Suitable for interior doors where physical assault is not expected. Indoor use only.

• Individually tested for holding force
• Easy Mount Adjustable Bracket
• Instant release (no residual magnetism)
• Optional Bond Sensor and Door Position Switch available
• Wire Access Chamber with Plug-In connectors

User questions & answers

Question:	Will this work for an exterior door in a weather protected location
Answer:	Yes it would because this would be installed inside the door. If the door is in-swinging, use a Z-bracket to mount magnalock. For further assistance, your may reach our technicians at 516-812-0917.

Product description

This kit includes heavy duty drill guide, blind nut placement tool, sex bolt - M32/M62/M82, T-handle hex wrench, hardware pack - M62/M82, hardware pack - M32, rubber washers (24), flat washers (24), insulated crimp connectors (24), threadlock - (10 included with IK), 1/8" cobalt drill bit, 3/8" cobalt drill bit, 3/8" carbide drill bit, 1/2" high speed drill bit, blind nuts (40 with collapsing tool), finish caps (24), long screw pack, product installation CD.

• Package Dimensions: 21.082 H x 39.878 L x 22.352 W (centimetres)
• Unit count: 1.0
• Package Weight: 7.95 pounds
• Country of Origin : United States