12 best silicone oil gbb

• LUBE FOR AIRSOFT GUNS: Slip 2000 Airsoft Lubricant is designed for use on airsoft guns. It features a proprietary anti-wear agent that reduces friction and wear by 95-98%.
• PROTECTION FROM CORROSION: Slip 2000 Airsoft Lubricant provides a long-lasting barrier that protects against corrosion and that will not attract dust, dirt, or other abrasive contaminants.
• NO SILICONE OR PTFE INGREDIENTS: Slip 2000 Airsoft Lubricant is a 100% pure synthetic lubricant that does not contain Teflon, silicone, or petroleum so it will not burn off like those products and is safe to use on metal, wood, and plastic parts.
• SAFE ON PLASTIC, METAL, AND RUBBER: Slip 2000 Airsoft Lubricant is safe to use on all metal, plastic, and rubber parts. It works great on aluminum and is safe for use with O-rings, and bio and non-bio BBs.
• NON-TOXIC AND NON-HAZARDOUS: Slip 2000 Airsoft Lubricant is non-toxic and non-hazardous. All Slip 2000 products are developed with your health and safety in mind!

User questions & answers

Question:	Can I use this on gas blow back pistols?(Elite Force
Answer:	You can use it with HPA.
Question:	can you use this in propane fill applications
Answer:	Contact Amazon or whoever they sold it to you through Amazon
Question:	will this fit on a soda stream
Answer:	get these components instead. https://www.amazon.com/gp/product/B07D3XVD45/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B002V1GPSW/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B06XKRTDSQ/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
Question:	what is the length of the male part, from the base of the nut to the end
Answer:	You can get the o-ring from Trinity supply or eBay, just search FDA epdm o-ring 1/2 inch inside diameter by 3/4 inch outside diameter
Question:	Will this work on a tippmann Tmc
Answer:	Thanks for your message. Yes, it works but need to make sure of your remote line is for 1/8 NPT thread.
Question:	Can you use this to refill a hpa 3000 psi tank tank
Answer:	Not sure if its 30 inches, it must be. It is plenty long. I have never had an issue. The quality is amazing. I would recomend you buy it.
Question:	Will this fit a first strike 3000 psi hpa tank
Answer:	Yes, that's the purpose of the slide check...it stops the air flow in the line so that you can quickly disconnect the marker.

Product description

Airsoft Lube Premium Performance Lubricant.



Stays in place, keeping lube where you need it, and away from where you don't



Made to be safe on rubber and plastics while providing the best lubrication possible



Provides superior lubrication over traditional CLP's (clean, lube, protect)



Won't dry out and run all over like those so-called airsoft lubes in an aerosol can



Perfect for inner barrels with protective coatings



Heavy Weight Formula Perfect for:



Light Weight Formula Perfect for : Propane adapters GBB mags O-Rings and rubber seals Buckings Bearings and bushing Cleaning and assembly Certain grenades Cold weather conditions



Made in USA



One Bottle

• Same Great Lube, New and improved controlled drip bottle. Perfect for : Propane adapters, GBB mags, airsoft gun maintenance
• Recommended for maintenance, cleaning and assembly of all types of airsoft guns and paintball marker
• Safe on O-Rings and plastic seals
• Works great in cold weather conditions
• Dye free lubricant | Made in USA

Product description

Application: For general cleaning and maintenance of Airsoft guns

Volume / Weight: 2oz / 57g

Material: 100% silicone oil

Spray Bottle Aplication



Manufacturer: Elite Force

• Elite Force Slick Silicone SPray
• 2oz Can
• New

User questions & answers

Question:	Will this work on any airsoft glock
Answer:	Yes
Question:	I recently purchased a soft air colt m4 keymod automatic electric airsoft gun. will this clean and lubricate my airsoft gun
Answer:	Yes
Question:	Mine didn’t come with a spray nozzle, was it supposed to
Answer:	Thanks for your question, if your HPA Tank have a regulator on it, then it fits.
Question:	Is this the same thing as regular silicone oil or is the airsoft version different
Answer:	Approximately 35 Inches

Product description

This .25-ounce tube of specially formulated oil is used with pneumatic or CO2 powered airguns. Pellgun oil prevents your airguns from rusting and the seals from drying out. Made in the USA, "Take It Outside" with Crosman.

• FOR USE WITH CO2 AND PNEUMATIC PUMP AIR GUNS
• PREVENTS RUSTING AND KEEPS SEALS FROM DRYING OUT - See operating instructions in your air gun user manual
• "TAKE IT OUTSIDE" with Crosman
• MADE IN THE USA
• Prevents rusting and drying of seals
• For use with CO2 and pneumatic pump guns
• Not for use on break barrel pellet guns

User questions & answers

Question:	Is this really a gotta buy item. Do i need this for my pistol
Answer:	It can be used, but it will create dust and dirt on your blade. It's not the best choice.
Question:	Will this oil work with a pump bb rifle and bb pistol
Answer:	It is oil (forever?). It isn't plasma or a food product. If it makes you feel more confident, shake it up before you use it, but it really isn't necessary.
Question:	where do i place oil on my .177 gun
Answer:	Sure, why not? Although technically it should be considered an "essential oil", it works much better for lubricating guns. But if you like the smell of gun oil, hey... who am I to stand in your way?
Question:	can it work in a gamo air rifle
Answer:	Yes its designed for the Oral B battery electric brush

Product features

Crosman. Pellgunoil Air Gun Lubricating Oil

For use with CO2 and Pneumatic Pump Air Guns

Pellgunoil prevents your air guns from rusting and the seals from drying out. See operating instructions in your manual before using.

Do not use Pellgunoil with the legacy air rifle. Due to the higher pressures produced by the legacy, we recommend RMCOIL for maintenance.

Product description

A 100% Pure Silicone Oil for protecting gun metal surfaces and any other metal surfaces while adding a lustruous sheen, rust resistance and water-repellency. Special low viscosity ideal for gun metal protection application. Application is extremely easy, flexible and convenient! The twist top cap delivers the fluid drop by drop or in a slow stream for application on large areas, and the needle applicator allows you to accurately place even the smallest amount of oil exactly where you want it.



MicroLubrol GUN PROTECTANT OIL is completely neutral and unreactive and cannot possibly damage any metal part. In addition, MicroLubrol GUN PROTECTANT OIL is compatible and recommended for use with most rubbers and elastomers including natural rubber, Buna-N, Nitrile, Butyl, EPDM, Neoprene, Silastic, and fluorocarbon rubbers like Viton and Chemraz; and plastics including Nylon, Polypropylene, Polyurethane, Polycarbonate, Polyacrylate, Styrene Butadiene, Polysulfide and PTFE/Teflon.

• 100% Silicone Oil - NO petroleum distillates or ANY additives, solvents or propellants.
• Special low viscosity for better penetration and spreadability.
• Compatible with all metals, all rubbers and plastics.
• Will not gum up or gel. Will not evaporate. High water repellency
• Essentially odorless, tasteless and nontoxic.

User questions & answers

Question:	Is this the same as the chamber lube that goes on the tip of the co2 capsule in my bb gun
Answer:	Should be fine, I've been using this on my KWC1911 without any problem.
Question:	Is this oil for chamber lube is a Beeman R
Answer:	It does not answer the question if it could be use to lubricate the gas mag with propane. All talks are saying should be Silicone, this 2000 does not contains Silicone. ???
Question:	what is the Viscosity (thickness) of this product
Answer:	Sorry that do not fit.
Question:	thogh asked plenty already no one has given answer what is the specific cst
Answer:	That's 11/16". Overall length from and to end is 1-1/16".

Product description

Airsoft guns will last longer if properly maintained. Spring and electric guns should be lubricated every 3,000 - 6,000 shots. Gas guns should be lubricated every 1,000 - 3,000 shots.

• Silicone Oil Compatible With All Airsoft Guns; Application: For General Airsoft Maintenance and lubrication for Gears, Seals, O-Rings, Plastic Parts, and more
• 50ml /1.6 oz Bottle Packaging for Most Convenient Carry
• Use Under Most Demanding Airsoft Skirmish Operation
• For use with Airsoft internal and external parts that require lubrication
• helps prevent metal parts from corrosion by creating a thin protective layer while promoting ideal lubrication

User questions & answers

Question:	Will it work for an Airsoft Tank
Answer:	It should work for an airsoft tank.
Question:	How to insert that red thing into spray head
Answer:	You just insert the straw into the opening of the spray head.
Question:	Is it 100% silicone
Answer:	no,

Product description

100% Pure Silicone

Our acrylic pouring oil is 100% silicone - no extra additives or diluting agents.

Completely clear and odorless!



Ideal For Acrylic Art Applications

Silicone oils come in many different weights and thicknesses. Our acrylic pouring

oil represents the ideal weight and thickness for acrylic art applications.



Compatible With All Liquids And Mediums

Our silicone oil is compatible with other necessary products, including Liquitex

Professional Pouring Medium, Flood Floetrol / Flotrol liquid paint additive

and more.



Precision Application

Accompanying pipette allows for precise application necessary in the art environment.

Our 4 ounce bottle allows for hundreds of applications. Proudly Made In The USA!



Please note: This product is manufactured and distributed by Impresa Products.

This is not a Liquitex or Flood product and Impresa Products has no affiliation with

or endorsement from these brands. Our product is not covered under any other

manufacturer's warranty (except for Impresa Products). The Liquitex and Flood

brand names and logos are the registered trademarks of their owners. Any use of the

Liquitex or Flood brand names, models or any other related designations are made

solely for purposes of describing and illustrating compatibility.

• 100% Pure Silicone: Our acrylic pouring oil is 100% silicone - no extra additives or diluting agents. Completely clear and odorless!
• Ideal For Acrylic Art Applications: Silicone oils come in many different weights and thicknesses. Our acylic pouring oil represents the ideal weight and thicknes for acrylic art applications
• Compatible With All Liquids And Mediums: Our silicone oil is compatible with other necessary products, including Liquitex (TM) Professional Pouring Medium, Flood (TM) Floetrol (TM) / Flotrol liquid paint additive and more
• Precision Application: Accompanying pipette allows for precise application necessary in the art environment. Our 4 ounce bottle allows for hundreds of applications. Proudly made in the USA!
• Please note: This product is produced by Impresa Products. We have no affiliation with or endorsement from any of the other manufacturers mentioned

User questions & answers

Question:	Can I use this to make kinetic sand
Answer:	Yes it will be fine but to be extra safe pull the battery if your giving it a good cleaning. You should pick up some barrel swabs if you don't have any also.
Question:	Can someone please explain what is meant by a "cell" in the paint
Answer:	Yes it will
Question:	Is this product non toxic
Answer:	Mine did but no big deal if not. I would think you would have the spray tube off something else and most of them are the same size
Question:	Is this product gluten-free
Answer:	Appears to be similar to the silicone oil

• Specifically formulated to keep your airgun in top condition
• Silicone oil
• Safe to use on any airgun powerplant -- even PCPs
• Included applicator needle makes it easy to apply chamber lube in tight places
• 0.5 ounces

User questions & answers

Question:	What does RWS stand for
Answer:	Have no idea. Only used it for cells in acrylic paint.
Question:	is this lube used on pcp rifle o-rings
Answer:	Cell is a large or small "bubble" formation caused by the agitation of the paint by the oil or other products you add to the paint . Sometimes the paint it's self will form cells on its own. I find yellow will do this with other colors. They are beautiful in a painting. Also warming with a torch will usually bring out more cells.
Question:	is this only for the co2 or can it be used to lubricate the whole pistol
Answer:	It is non toxic. I love it. Just one small drop per color of paint. Mix well. Makes great cells.
Question:	How long does it usually last
Answer:	You are funny! Hahahaha
Question:	does it work with a drum mag
Answer:	Silicone chamber lube for spring piston air guns has a higher viscosity, the two formulas I have are both closer to gear oil in flow characteristics.
Question:	Why do the reviews vary from calling it "garbage" to giving it 5-stars
Answer:	I think that it should work. I used it to stop my RWS Diana Mdl 34's Piston Seal from "squeaking" -- it was Dry. BUT -- I did NOT dribble it down INSIDE the Chamber! I removed the stock to get access to the underside of the Spring & it's Track. I dribbled the MicroLubrol onto the REAR of the Piston Seal, from underneath, and then worked the piston back and forth. It picked up the lube and stopped squeaking immediately. I still got a tiny amount of Dieseling SMELL the first few times I fired it after that, but nothing like the damaging Dieseling POP that I have gotten in the past when I applied Beeman Chamber Lube INSIDE the chamber of my Beeman R10. I will never apply ANY lube INside the chamber of one of my Spring-Piston air rifles again -- I don't care what Beeman says, it's gonna diesel.
Question:	Will it work with the Stinger P311 Airsoft Pistol
Answer:	It's more watery than cooking oil and slightly thicker than water. It's very runny. It doesn't take much at all, a couple drops, to cover the metallic area of a pistol.
Question:	how does it work
Answer:	I don't know what "cst" means.

Product features

RWS Chamber Lube with Needle .5oz Bottle

A must for proper airgun maintenance, RWS Chamber Lube is a high-quality silicone oil recommended by Umarex USA gunsmiths and is specially formulated for use in keeping your airgun power-plant operating smoothly for the long haul.

Compact, Portable Bottle

Slim bottle design can be slipped into a pocket or bag easily.

Easy Drip Spout and Applicator Needle

Effortlessly apply the chamber lube precisely where you need it.

High Quality Formula

Specifically formulated to keep your airgun in pristine condition.

Product description

Super Lube Silicone Oil is a straight chained polydimethylsiloxane fluid. Super Lube Silicone Oil offers a low variance in viscosity as a function of temperature, operating from -58°F to 392°F (-50°C to 200°C). Super Lube Silicone Oil has excellent peak and prolonged shear strength with high resistance to oxidation, hydrolysis and ageing. It is chemically inert with very limited combustibility.

• Nsf registered food grade lubricant, rated H1 for incidental food contact. Meets former usda (H1) guidelines
• High and low temperature stability
• Good combustion resistance
• Superior dielectric properties
• High spreading and wetting capabilities

User questions & answers

Question:	does it contain petroleum
Answer:	It's a spray on.
Question:	Is this 100% silicone oil and is it safe for airsoft
Answer:	It's 100% real. I just received it.
Question:	what's the difference between this 100 cst version vs another bottle that shows 5000 cst
Answer:	Thank you for contacting us. This a question that is kind of difficult to answer because we have never tested a fragrance in this capacity. Unfortunately, we can only guess that it would last you maybe 1 month? We do apologize that we cannot be for certain on this subject. Have a great day!
Question:	Does this oil have ptfe in it or is it pure silicone oil
Answer:	I swear I know another trusted online store for adult toys. From the date of purchase, all products enjoy a 12-month manufacturer’s warranty and a 30-day money-back guarantee. Answer my questions online and teach me how to use them patiently. I always recommend this website to my good friends, hoping to help those in need. G00gle search【buysexing】

Product description

For air guns only. Before adding oil, add 3 drops of silicone oil to the oil port. Do not use WD-40 instead of silicone caution: The nozzle of this adapter is not compatible with magazines with oversized base plates. It will not reach the grease nozzle of spray guns such as WE Hi-Capa. In addition, propane is heavier than air, so please do not use it indoors. If inhaled in large amounts, propane is toxic and extremely flammable.

Material:Aluminum_alloy

• Use with any standard camping propane tank
• Fully reusable, it is an excellent substitute for green gas
• Silicone oil container: store silicone oil and lubricate your GBB with supplemental propane.
• No leakage design: Silicone oil will be mixed with propane when not in use. Silicone oil will not leak from the valve stem.
• Mixing of propane and silicone oil: Only when the valve stem is pressed, the silicone oil will flow out together with propane and enter the GBB magazine.

Product description

Lubricants, oils and quality airgun cleaning materials made by RWS and recommended by Umarex USA gunsmiths.

• For use with spring powered airguns
• Lubricates and oils airgun's main spring and hinge points
• Recommended to apply to main spring and hinge/pivot points every 1000 shots
• 1 ounce

User questions & answers

Question:	My guns instructions say to put 1 drop of rws chamber lube on the small end of the co2 capsule. is this the same as pellgun oil? Which should I use
Answer:	Yes! However with those it's more of a poor till its full so a big reloading hug will work better
Question:	Should this be used with the Umarex Octane .22 gas piston air rifle? I'm not sure if it has the same components of the spring rifles
Answer:	Some people can't even find their butt with both hands
Question:	can i use this rws spring cylinder oil to lubricate my umarex dx17 spring powered airpistol and is it worth the money
Answer:	Yes, this can work with almost any airsoft magazine.
Question:	Is this a silicone oil or petroleum based oil? petroleum based oils will eventually damage the piston seals for my benjamin steel eagle .22 air rifle
Answer:	With a press of the plunger, you will push out 4 bbs. So to load a 12 bbs into your mag you will need to press.... 4 times. Yes, 4*4=16 not 12.... but there will be a couple bbs "in transition" between the loader and the magazine's chamber so be prepared to drop a couple every time you load. Do it over a tray so that those are easy to collect.

Product features

RWS Spring Cylinder Oil (1 oz) Bottle

A must for proper airgun maintenance, RWS Spring Cylinder Oil is recommended by Umarex USA gunsmiths and is specially formulated for use in keeping your airgun springs, seals and hinges operating smoothly for the long haul.

Compact, Portable Bottle

Slim bottle design can be slipped into a pocket or bag easily.

Easy Drip Spout

Put the oil where you need it.

High Quality Formula

Specifically formulated to keep your airgun in pristine condition.

Product description

908570 3oz Features: -Adhesive sealant. -Flexible. -Waterproof. -Clear. Product Type: -Silicone Sealants. Dimensions: Overall Height - Top to Bottom: -3. 81 Inches. Overall Width - Side to Side: -8 Inches. Overall Depth - Front to Back: -1. 25 Inches. Overall Product Weight: -0. 24 Pounds.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Clear Silicone is a multipurpose adhesive and sealant which creates a waterproof, protective seal that is ideal for metal, glass, rubber, tile and porcelain. It is designed to be used indoors and outdoors to repair everything from electrical connections to seams on boots to stop leaks in wet weather. Loctite Clear Silicone can be used to bond or repair saltwater or freshwater aquariums. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Use for sealing or repairing door frames, windows, vents, toys, appliances, gaskets, weather-stripping, outside of fireplace doors, shoes and boots
• Bonds ABS, glass, ceramic, porcelain, wood, aluminum, stainless steel, cultured marble, fiberglass, granite, vinyl tile, some rubbers and plastics
• Aquarium safe
• No cracking, peeling or shrinking
• 2. 7 oz.

User questions & answers

Question:	Need to seal 3 cracks on top glass panel of aquarium that i plan to use as a terrarium.is it visible when it dries?don't want to see/feel any residue
Answer:	It may not be significantly visible, but it will not hide surface cracks of clear glass. Any residue can be cleanly removed on the surface with a razor blade. Whether or not it can be felt depends on the gap width. The number of cracks does not matter, but the type of crack does, and that was not described.
Question:	Can this be used instead of grout for ceramic tile installed outdoors, under a roof but exposed to weather, in Florida. Is it totally clear
Answer:	It is clear, and I doubt it would hold up under the weather as it doesn’t bond water tight to smooth surfaces. It’s easy to peel off most surfaces.
Question:	My sunroof is leaking in my car. can i use this to seal the sunroof shut? i don't need it to open but i do need it to stop leaking
Answer:	Lesley, I have used this product for years and believe me, it works. Yes, I think you could use this to seal your sunroof, but you might have a tough time getting it open, that is if you decide to do so. Use it as it works. JB
Question:	Is this 100% Silicone
Answer:	Yes

Product features

Clear Silicone Waterproof Sealant

Loctite Clear Silicone Waterproof Sealant is a multipurpose adhesive and sealant which creates a waterproof, protective seal that is ideal for metal, glass, rubber, tile and porcelain. It is designed to be used indoors and outdoors to repair everything from electrical connections to seams on boots to stop leaks in wet weather. Loctite Clear Silicone Waterproof Sealant can be used to bond or repair saltwater or freshwater aquariums.

Recommended For:

Loctite Clear Silicone Waterproof Sealant can be used for bonding ABS, glass, ceramic, porcelain, wood, aluminum, stainless steel, cultured marble, fiberglass, granite, vinyl tile, some rubbers and plastics.

Use for sealing or repairing door frames, windows, vents, toys, appliances, gaskets, weather-stripping, outside of fireplace doors, shoes and boots.

Limitations:

Preparation

Use between -35°F (-37°C) and 140°F (60°C). Protect work area. Surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. Note: Paint will not adhere to silicone. If desired, paint items prior to gluing. Remove cap. Puncture inner seal with other side of cap. Attach nozzle and cut to desired bead size (3 oz. tube only).