11 best glue for metal

Product description

I Love To Create-Aleene's Jewelry & Metal Glue. Perfect for jewelry ceramic pieces leather metal rubber gems mirrors wire and more! Strong and permanent. This package contains three .1oz tube of jewelry and metal glue. Conforms to ASTM D 4236. Made in USA.

• I Love To Create-Aleene's Jewelry & Metal Glue
• Perfect for jewelry ceramic pieces leather metal rubber gems mirrors wire and more! Strong and permanent
• Made in United States
• Bonds quickly and gel formula won't run when applied
• Dries clear, strong and permanent
• 0.3 fl oz contains 3 tubes

User questions & answers

Question:	is this epoxy
Answer:	No, this is not epoxy330. Amazon does sell epoxy so check it out.
Question:	how do you remove the thin collar
Answer:	The thin collar is only on the larger tubes. If you have any further inquiries, please contact Aleene's at [email protected] or call 1-800-438-6226.
Question:	How good is this glue for glass
Answer:	Not good, I tried and instead it glued my fingers to the glass and glued my fingers together
Question:	How to remove excess glue from edges
Answer:	If the glue has not dried, you can wipe the excess with a damp cloth or Q-Tip. If the glue has dried, you can use 85% or higher rubbing alcohol or 100% acetone. If you have any further inquiries, please contact iLoveToCreate at [email protected] or call 1-800-438-6226.

Product description

The gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Service Temperature 65 Degrees Fahrenheit to 220 Degrees Fahrenheit.

• GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
• ANTI CLOG CAP: Helps keep glue from drying out. It's Gorilla tough use after use
• IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
• FAST-SETTING: Dries in 10-45 seconds. No clamping required
• VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials

User questions & answers

Question:	Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible
Answer:	Hello this is Christopher Stafford of reflections, unfortunately I wouldn’t recommend this item for your particular application. I would recommend Loctite 404. Thanks for your message and interest.
Question:	EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks
Answer:	Hello, Gorilla Super Glue Gel is not recommended for use on foam surfaces. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #315176. Thank you, The Gorilla Glue Company
Question:	Will it glue leather to metal
Answer:	Hello, Gorilla Super Glue Gel will work on leather and metal surface. For smooth surfaces, we recommend roughing the surface to provide a texture for the glue to adhere to. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #194392. Thank you, The Gorilla Glue Company
Question:	What's the difference between their super glue gel and their super glue
Answer:	Hello Ryan N.,Gorilla Super Glue Gel is a thicker consistency that is perfect for applications on vertical surfaces. Our Gorilla Super Glue and Gorilla Super Glue Gel will have the same holding power. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company

Product description

Permatex Steel Weld Epoxy is a versatile, easy-to-use, multi-metal epoxy two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60°F to 300°F (-51°C to 149°C). Permanent strength up to 4500 PSI. Ideal for use on complex, multi-piece assemblies and for bonding rigid materials, sealing welded seams, filling metal cracks, and mounting metal components.

• Versatile, easy-to-use, multi-metal dark grey epoxy adhesive that eliminates the need for welding or brazing
• Water and solvent resistant epoxy sets in 4 minutes with no clamping needed; permanent strength up to 4500 PSI
• Fills gaps and will not shrink; when cured can be drilled, sanded, threaded or filed
• Temperature Range: -60°F to 300°F (-51°C to 149°C)
• Suggested Applications: Ideal for complex, multi-piece assemblies; bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, and steel; use to seal welded seams, fill metal cracks, and mount metal components

User questions & answers

Question:	Will it work on lawn tractor radiator hole
Answer:	It's worth a try, the stuff is great. I question that there is a water radiator in a lawn tractor, usually they are air cooled.
Question:	Will this work to fix my cars side view mirror because jb weld was an epic fail
Answer:	This is a lot stronger then jb weld. but use a mesh when using it. Makes it better. Ultimately I would say to go on am-autoparts.com You can get the whole thing for under 100 and free shipping.
Question:	What is the color, black, gray, clear, tan
Answer:	dark Grey
Question:	Does this epoxy do well in heat? Specifically exhaust/muffler heat
Answer:	I used to heat to remove the epoxy when it didn't hold as well as I had hoped. I don't think this would work with a muffler.

Product features

Permatex Steel Weld Epoxy

Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Permanent strength up to 4500 PSI. Ideal for complex, multi-piece assemblies and for bonding rigid materials. Use to seal welded seams, fill metal cracks, and mount metal components.

Product description

Gorilla Super Glue Micro Precise Gel is an easy-to-use, thicker formula combined with a precise, controlled dispensing tool. Designed to fulfill consumers’ desire for an easy-to-use, precise application experience, this NEW Gorilla Super Glue form allows you to apply only the amount of glue that you want, exactly where you need it. This tool was specially designed to fit comfortably into your hand. Click on the Gorilla link at the top of the page to see more great products from The Gorilla Glue Company.

• Gorilla Super Glue Micro Precise Gel is an easy-to-use, thicker formula combined with a precise, controlled dispensing tool.
• No Run Control Precise Gel Formula
• Impact Tough: Reinforced to increase impact resistance and strength
• Smooth Application: Precise, controlled dispensing tool that fits comfortably in hand
• Fast Setting: Dries in 10-45 seconds, no clamping required
• Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper, and more!

User questions & answers

Question:	Will this work on brass to wood
Answer:	In my experience, this glue will join ANYTHING
Question:	for my craft project will it bond together hard plastic and fabric
Answer:	I would say it should. If it keep a thumb nail together, it should glue fabric to hard plastic.
Question:	Is gorilla glue non toxic? Want to put it on a crack in a cup
Answer:	No where can I find that it is non toxic. I would not chance using it on anything that you would eat or drink from
Question:	Can i use this to bond a piece of rope to a piece of resin jewelry
Answer:	It might work, maybe research a bit more on what it works with/for

Product description

Gorilla takes epoxy to a new level—the Gorilla tough level. With its superior solvent and water resistance, Gorilla epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won’t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it Dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare your work area and the surface: It is recommended to use Gorilla epoxy In a well-ventilated area. Prepare the surface: to improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla epoxy: remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: after mixing is complete, apply Gorilla epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: to reach maximum bond strength, clamp project together and leave undisturbed. Important cure times: set: 5 minutes to apply and position handling: allow to cure for 30 minutes undisturbed (no weight or handling) final cure: allow 24 hours for load-bearing weight storage: to close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla glue company.

• Strong, permanent, fast and gap-filling; great for multiple surface applications
• Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
• Dries clear; ideal for clean, easy finishing
• 6 minute set; plenty of repositioning time for the perfect fit
• Easy-to-use syringe; separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses

User questions & answers

Question:	Will Gorilla glue work on hanging something on ceramic tile
Answer:	I have zero doubt that it will work. I would prep the surface of the tile with sandpaper or steel wool at the least.
Question:	Will this work to fix an axe head
Answer:	I used this to fix a maul head to the handle. It was slipping thru extended use and looked like it would come off soon. First sanded and cleaned the fiberglass handle with acetone to created a rough and clean surface. Then wiped the inside of the mall head with acetone. Mixed up a big batch since I didn't want to fall short of product once I started filling. Applied it liberally to the handle then slipped the head on and used the rest to fill in around any crevice left around the head until it was one pool of epoxy flush with the head top. Let it sit for a day then used. Been over a year and it has not had any sign of slipping and looks the same as when I first glued it on.
Question:	I need a clear epoxy to cover and protect a circuit i made in a small box mod i made. its for a small 4- 6 volt device. is this ok
Answer:	Probably YES is your answer with NO guarantees, since I have never used an epoxy to cover ANY type of circuits. I HAVE HOWEVER, used a SILICONE SEALANT (marine grade) also available through AMAZON, to cover AND seal electrical circuits on several watercraft I have owned over the years. ALL with great success. The beauty of the silicone is that it dries clear and can easily be removed while the epoxy dries to an amber hue and is almost impossible to remove. Once it dries, it's there forever. MY suggestion is use a marine grade (waterproof) silicone sealant. GOOD LUCK!
Question:	I'm thinking of using this on ceramic cookware. Is it heat resistant up to 500 degrees F
Answer:	MamaO - researched question - Do NOT use Gorilla epoxy on food ceramics. For other ceramics other than food, should be ok up to 180. From 200-500, epoxy will de-compose. / Look for food safe stuff only, but best to not repair your ceramic for food use. What you want is hard to find !

Product description

Loctite Glass Glue 2-Gram Tube (233841)

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Glass Glue is the only patented super glue specially formulated for bonding glass. The unique butyl formula provides a lasting bond that regular super glue can't. It bonds glass to glass and glass to other materials. Forming fast and durable joints, the bond is water and heat resistant to stand up to everyday use. Loctite Glass Glue dries clear, sets without clamping and is dishwasher safe. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Brand name: Loctite
• Country of Origin: United States
• No batteries required
• Bonding all types of glass to itself and glass to non-porous materials such as, steel and certain plastics
• Works on clear, tinted, brown, opaque and stained glass and crystal - water and heat resistant, dishwasher-safe
• Sets in seconds and dries clear
• Self-piercing tube for mess-free application
• 2-gram tube

User questions & answers

Question:	Would it work on pipes
Answer:	I would say no. It works great on glass. Besides, guling pippes together is generally not a good idea if youever want to take them apart again. Usually, teflon tape or pipe dope.
Question:	Why is glass glue better than regular gel or liquid superglue, which also dries clear? How are they different
Answer:	One very noticeable difference is clarity: the glass glue is clear. Standard glues dry with a yellowish cast.
Question:	I am looking for a glue that I can use to fill in small chips on the rims of crystal glasses so the chips don't show, vs filing.Would this work
Answer:	No, it wouldn't work. Cyanoacrylate (aka superglue) cannot fill cracks or spaces. Your best bet is an instant clear epoxy, which turns into a plastic when set and fills spaces well. The problem is that it's hard to make the epoxy completely clear. It will probably have bubbles or be cloudy. Your best bet is to go to a professional glass/crystal restorer.
Question:	Does it start to yellow after some period of time. I have some swarovski figures that came unglued. The figureines are made from beads
Answer:	I used it on Swarovski figurines at least a year ago and they still look great. Not sure about 50 years from now, but they'll be someone else's problem then.

Product features

Glass Glue

All types of glass to itself and glass to non-porous materials such as metal and certain plastics.

Benefits:

Crystal clear, fast bonding, dishwasher safe.

Size:

2 gram tube.

Product description

Elmer's No-Wrinkle Rubber Cement (2-Pack)

• Elmer’s No-Wrinkle Rubber Cement provides an easy solution for adhering photos and detailed cut-and-paste projects
• The rubber cement container includes a brush-on applicator. Excess glue rubs off cleanly and shows no wrinkles as it dries
• Elmer’s No-Wrinkle Rubber Cement is acid free and photo safe

User questions & answers

Question:	Is this glue only good for porous materials
Answer:	I have only used it on paper. I turn to a hot glue gun for ceramics, wood, etc.
Question:	rubber repaired cracks surface is soft or hard
Answer:	It is Soft but it's only for bonding material.
Question:	Do you think this will hold for outing rhinestones on candles
Answer:	Great question. I believe this rubber cement will hold perfectly fine against the candle glass when attaching the rhinestone but remember glass is smooth so their is barely any grip for most glue to hold. Fortunately this Elmer's Rubber Cement isn't your average DYI adhesive. Its super strong and will manage to get its own grip on glass. Hope this helps :)
Question:	how long will this last
Answer:	Depends on how much you use it
Question:	Does any one know how long it will last in storage
Answer:	i have a can over 2 years old steel good just keep the lid on keep the air out.
Question:	What is the shelf life after its open
Answer:	As with mu PVC glues, I store it upside down. Seems to not dry out when doing that. Easier to open also.
Question:	I know this says rubber cement but is this good for car tires with patches? i mostly say people commenting about bike repairs
Answer:	I only use it for car tires. I will plug the hole and take a lighter and light the cement on fire for about 3-4 Sec it somehow activates the cement for me. that way I don't drive off slinging rubber cement.

Product features

The Go-To Rubber Cement for Tire Repairs

Slime is the brand known for flat tire prevention and repair. So it makes sense that we offer some of the best tire repair patch and plug tools on the market.

There is nothing fancy about our Rubber Cement. It is practical, easy to use and most of all, it works! Reach for Slime’s Rubber Cement for all your rubber repairs.

Step 1:

Buff area around puncture lightly, removing loose particles and making sure entire area within 1/2" of puncture has roughened appearance.

Step 2:

Brush on a moderate amount of rubber cement onto roughened surface and spread evenly. Work into material and scrape off excess.

Step 3:

Remove backing from patch without touching exposed surface.

Step 4:

Apply repair material directly over puncture and press firmly, especially around the edges.

Slime has everything you need

From complete patch kits to scuffers, buffers, rubber cement, markers and more, Slime offers everything you need for a complete repair. Patch your tires with the trusted brand known for flat tire prevention and repair.

Product description

Devcon Plastic Steel Epoxy is a two-part, high strength, cold-welding epoxy for use on all types of metal repairs. Non-flammable and water-resistant, this epoxy contains a steel alloy that will not rust. Fills holes and repairs cracks in broken furniture, tools, appliances, toys, cars and more. Dries to a dark gray color, and once fully cured, it can be drilled, threaded, machined or filled. Bonds all metals including steel, stainless steel, aluminum, brass, iron, pewter, and copper with a tensile strength of 2500 PSI. Only mix the amount of hardener and resin together that can be used within the handling time, and always mix equal portions of the hardener and resin thoroughly together in order for this product to cure properly. Epoxies are generally not recommended for long term exposure to chemicals and solvents. Temperature Range: 200°F constant; 250°F intermittent.

• two-part, high strength, cold-welding epoxy for use on all types of metal repairs
• Contains a steel alloy that will not rust
• Handling time: 60 minutes; Set time: 6 hours; Cure time: 16-24 hours
• Non-flammable and water-resistant
• Can be drilled, threaded, machined or filled once fully cured

User questions & answers

Question:	Will this Epoxy bond other materials other than metal
Answer:	Yes
Question:	Does this epoxy set as hard as Devcon
Answer:	No
Question:	can I use this to fill a small hole caused by rust near the drain in my metal tub
Answer:	Yes. It should work fine for that. Make sure you prepare the tub surface first and let it set for the recommended amount of time before using the tub.
Question:	Will this bond a plastic hook to a wall that is made of frp panels? also what is the maximum weight it can hold up? thank you
Answer:	This video test several epoxy brands and does show a hanging weight test. Devcon did well against others but I'd imagine another solution would work better. https://www.youtube.com/watch?v=XObmZIbHOzY

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
• VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Will set in 4-6 hours, and cure in 16-24 hours
• Waterproof, petroleum, chemical, and acid resistant when fully cured

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• After curing, J-B Weld Original can be drilled, tapped, filed, sanded, molded and shaped.
• J-B Weld Original is waterproof, petroleum, chemical and acid resistant once fully cured.
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• Use On: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines and Deck & Hull Accessories.

Product description

Barge All-Purpose TF Cement Rubber, leather, Wood, Glass, Metal Glue 2 oz

• Incredible bonding power!
• Cobblers have relied on this product for decades!
• The almost exclusive adhesive of professional and serious leather rafters.
• Contact us if you need the quart
• gallon or bulk order.

User questions & answers

Question:	Will it bond plastic to EPO foam or styrofoam (e.g., models with plastic and foam parts
Answer:	If possible, I would do the dye first as the leather cement forms a layer on the leather that may not let the dye through and may cause an uneven color.
Question:	Will this bond a half sole onto a boot
Answer:	I'm not sure...but it has worked on everything from real leather to paper when I've used it
Question:	Is 2 oz enough to repair the sole on one boot? Not a pair. Just one boot. The toe lifted off the sole
Answer:	I used it to glue a seam on my leather wallet. It lasted about six months. I know I have a new wallet.
Question:	Can I use this to glue a patch to leather jacket
Answer:	This is leather glue and normally used to glue leather together before you stitch it. If it's leather on leather then this is some awesome glue. You need to make sure the surface is scuffed up. Even without stitching it's hard to pull apart.

• ✔Used to repair pipes, water tanks, fuel tank leaks, industrial maintenance, tool crack repair, flooring, door seams, auto parts, swimming pool ceramic decoration, etc.
• ✔Suitable for a variety of materials, including metal, wood, glass, ceramic, fiberglass, stone, marble and many hard plastics, temperature: -50 degrees to 120 degrees.
• ✔Easy to use: 6 * 5g individually packaged, no need to cut, evenly according to the amount, fill the repair area, can be polished, painted, colored after curing.
• ✔0-10 minutes: Mixing time, finish kneading and use. 10minutes-24 hours: curing time, the hardness increases rapidly. After 24 hours: completely hardened and permanently fixed.
• ✔High-quality materials: Good insulation after curing, do not soften when exposed to water, no food contact.

User questions & answers

Question:	Can this be used to repair jewelry, rings in particular? When dried is it safe for prolonged skin contact
Answer:	yes, it can be used to repair a ring. you contact the manufacturer to determine if it is safe for prolonged skin contact.
Question:	Can this product bond fiberglass? And what is the psi resistance
Answer:	Psi is pounds per square inch
Question:	Is this product paintable after drying
Answer:	Yes, can be painted after drying.
Question:	Can it be used on my macbook charger cable where metal wire is exposed
Answer:	I think so. It's not actually a metal. It's an epoxy resin. To repair my charging cable I used the SUGRU modable glue that matched the white color of the cable. It is a one time use per packet. here's the link for that on Amazon: https://www.amazon.com/Sugru-Moldable-Glue-Rebel-Tech/dp/B01M65432U/ref=sr_1_2_sspa?crid=2V6GRZ2LH9YT4&keywords=sugru+moldable+glue&qid=1574274829&sprefix=sugr%2Caps%2C671&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWDVaNDBPMEtUQ0EwJmVuY3J5cHRlZElkPUEwNDQ5NTI5M0M4UzRGOEFJSU9MMCZlbmNyeXB0ZWRBZElkPUEwODk2NDcyMjJMODFRWjVCRFFIWiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Product features

How to use:

Step 1: Clean the repaired area to avoid impurities and grease.

Step 2: Take out the separate epoxy putty package as needed, knead for 3 minutes, evenly dark green.

Step 3: Press firmly into the repaired area within 3 to 5 minutes, and fix it with external force and smooth it with some water;

Step 4: Wait 24 hours, the liquid epoxy glue is fully cured and the product is repaired. At this point, you can polish and modify it as needed.

Tips:

1. The product has a slight odor and can be repaired in a ventilated place.

2. Strong adhesion, may cause irritation to the skin, it is recommended to wear gloves.

3. Wash hands with soapy water or shower gel after the operation is completed.

4. Harmful if swallowed, please stay away from children.

Easy to handle:

high viscosity and curability, can repair a variety of cracks, holes, not easy to fall off after curing.

Good performance:

heat resistance, water resistance, corrosion resistance, good insulation after curing, good plasticity, you can shape what you want.

Subdivision use:

Masonry, wood, ceramics, rubber, fiberglass composites, porcelain, stone, marble and many hard plastics, sealed pipes, tank tank leak repairs, appliances, accessories, furniture, toys, auto parts, pools and concrete cracks.