11 best liquid weld

Product description

J-B KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.

• J-B Weld KwikWeld: A fast setting version of The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more
• Cure and Set Time: After mixing the tubes at a 1: 1 ratio, it takes 6 minutes to set and 4-6 hours to cure. Once cured, KwikWeld can be tapped, filled, sanded, molded and drilled. KwikWeld’s set and cure color is dark grey
• Versatile and Dependable: J-B Weld KwikWeld is steel reinforced, has a tensile strength of 3127 PSI and can withstand temperatures up to 230 degrees Fahrenheit (110 degrees Celsius). When fully cured, KwikWeld is waterproof and resistant to petroleum, chemical and acid
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass
• Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Weird question i know but would i be able to glue my led light strip to the carpet part of my vehicle with this
Answer:	Yes but it doesn't set quickly like super glue. You'll need to hold the led in place for at least 6 minutes and then let the glue dry completely. I used the glue to reattach a rearview mirror support slug to a windshield. I held the slug in place for 6 minutes and then let it dry overnight before I attached the rearview mirror to it. The instructions on the package will explain this. Also, be aware that you will NEVER be able to remove the led without ripping out the carpet.
Question:	Would this work to fill a small hole in a slab of granite
Answer:	Yes but it won't be pretty
Question:	We put in peel and stick flooring, and there are a few gaps between boards. Would this work to fill in the gaps
Answer:	Can it? Sure. Is it practical to use it in this manner? Probably not. It is messy, but if you tape the areas where you do not want the epoxy and pull the tape up before it sets, you'll be fine. You can also clean it up with acetone as long as you get to it before it sets. I also wouldn't recommend 5/6 minute epoxy, either. If you are filling a long gap, you'll need the extra time for clean up.
Question:	can it hold metal to plastic
Answer:	yes it can

Product features

Original Twin Tube Epoxy

KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours.

Additional Attributes

• Can withstand 230°F/110°C
• When fully cured KwikWeld is waterproof, petroleum, chemical, and acid resistant!
• Surface Applications: Metal, Plastic, PVC, Concrete, Ceramic & Tile and Fiberglass
• Use on: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines and Deck & Hull Accessories.

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original set and cure color is dark grey.
• VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius. When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• Compatible Surfaces: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and more!
• Repairs/Uses: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agriculture Equipment, Motorcycles, Toys, Boats, Watercraft, In/Outboard Engines, Deck & Hull Accessories and more!

• Clear, instant setting two-part epoxy sets in 1 minute and cures in 1 hour
• Great for tile, most plastics, ceramic, glass and more
• Tensile strength of 2850 PSI for a strong, permanent bond
• No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
• J-B Weld is proudly made in the USA

User questions & answers

Question:	I have a crack in a pressure washer pump. Will it hold under that kind of pressure
Answer:	I used it to repair a puncture hole on the gas tank of my Honda big red 3 wheeler about 12 years ago. I sanded to bare metal and used 91% rubbing alchohol to prep and clean the area. I put a small piece of masking tape on the inside of the tank and then filled the hole with JB weld. I let it cure of about 3 or 4 days. I then sanded it smooth painted it with Honda red paint and 12 years later I am writing this. It still holds gas just fine. Doesnt leak, you wouldn't even know there was a hole if I didnt tell you. Now, i do not know about diesel as I have not specifically worked with that situation. My guess is if you prep the area well enough and get rid of all the residue it will work just fine.
Question:	Once hardened can it be drilled or will that shatter it
Answer:	Yes, for sure
Question:	hi would like to ask if this cold-weld jb weld is suitable for cracked car valve cover? can it widthstand the heat of the valve cover
Answer:	With stereo surround sound, the sound quality is very good
Question:	Hi I accidentally hit a rock and cracked my aluminum engine oil pan. Will this be a permanently be fix or just temporary? the crack is 3 inch length t
Answer:	Any age
Question:	is this good with diesel tank cracks
Answer:	Yes, there are two foot pedals for the bass drum. So you don't worry about it.

Product features

Instant Setting Epoxy

MinuteWeld is a special formulated, high-strength, two-part instant setting epoxy. MinuteWeld will set under most temperature conditions in one minute. MinuteWeld is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood, and metal.

Additional Attributes

• MinuteWeld provides a stronger and more permanent repair than Super Glues because it is an Epoxy.
• MinuteWeld sets in one minute and cures in one hour providing efficient and quick repairs when needed.
• MinuteWeld comes in a re-sealable syringe allowing for multiple uses without having to worry about drying out!

Product description

ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 4400 PSI, ClearWeld sets to a hard, permanent bond.

• J-B Weld ClearWeld: A clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more. J-B Weld ClearWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!
• Cure and Set Time: After mixing the two part formula with the included mixing tray and stir stick, ClearWeld takes 5 minutes to set and 1 hour to cure. J-B Weld ClearWeld set and cure color is clear.
• Strength: J-B Weld ClearWeld has tensile strength of 3900 PSI.
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and Glass.
• Do it Yourself: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Fit type: Universal Fit
• Flash point: 67.00 degrees_celsius

User questions & answers

Question:	Will this glue work when you are glueing glass to glass
Answer:	You're joking, right?
Question:	How is the clarity of this epoxy? Does it cloud after cured
Answer:	"Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, filed, sanded and drilled after curing." This quote is right off the package, but I know for a fact that when we accidentally drilled too large a hole then filled it with JB Weld, we were able to drill a smaller hole with no problem.
Question:	Will this adhere rubber gaskets to hard plastic that will be underwater
Answer:	Depends...the material your valve cover is made from may swell or shrink under heat and cold. Whether J-B Weld will move is unknown. If you try it you will have to de-grease contact areas to form a good bond. Let us know if it works for you.
Question:	How do you preserve this for future use. Mine dried up after about 6 months. I don't use it regularly. Is there a secret for preserving it
Answer:	Getting the metal clean first is the problem. Replace the oil pan, or have it welded by an expert.

Product features

Quick Setting Epoxy

ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld sets to a hard, permanent bond.

Additional Attributes

All J-B Weld Syringes have a unique dispensing system allowing customers to re-seal the product, which prevents air from curing the epoxy or adhesive, so they can use it multiple times. J-B Weld also provides a mixing tray and stick in the package so you can get to work right away!

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original set and cure color is dark grey.
• VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius. When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• For strong permanent repairs
• Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted

User questions & answers

Question:	can this seal a air compresser tank at 125psi.has a small hole
Answer:	Sorry but we used it for clear plastic on brass and a couple of plastic toys. Worked great for them but I cannot say yes or no for glass on glass. Good luck.
Question:	can i use this item with car A/C condensator between alluminium and bronze
Answer:	I used it to fix a refrigerator door shelf and it cured completely clear
Question:	What is the application rate? how much area will the 2oz. or 10oz. cover? i need approx. 18 sf
Answer:	Under the applications uses: marine; plastic& PVC; fiberglass, concrete, metal, wood, tile & ceramic,auto repairs, home repairs, industrial, outdoor equip., craft, trucks, marine, agricultural & equip. motorcycle, toys, and plumbing.
Question:	What's the difference between this and the "new version"? Why is the new version cheaper...it looks like the same thing
Answer:	If one component of an epoxy becomes too hard, it can usually be softened with heat. Microwave for 5 seconds. See if it has softened. Repeat as needed. You probably should wait till it cools before you use it.

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• Compatible Surfaces: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile, Fiberglass and more!
• Repairs/Uses: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agriculture Equipment, Motorcycles, Toys, Boats, Watercraft, In/Outboard Engines, Deck & Hull Accessories and more!

Product description

Permatex Liquid Metal Filler is a specialty adhesive which offers ideal solutions for many automotive bonding jobs. This easy-to-use filler can be drilled, filed, sanded and painted and forms a long-lasting, metal-tough bond. Works on metal, wood, and concrete and is an excellent adhesion to galvanized metal. This filler also repairs cracks or porosity leaks in cast metal parts and fills small holes, cracks, and perforations. As complements to a full line of super glues, these products make a more complete adhesive set, while the tried and true formulas guarantee consumer satisfaction.

• Works on metal, wood and concrete
• Excellent adhesion to galvanized metal
• Repairs cracks or porosity leaks in cast metal parts and fills small holes, cracks, and perforations
• Resists water, oil and gasoline
• Suggested Applications: Oil pans, stake bed holes, door panels, cast metal parts

User questions & answers

Question:	I need to solder a jump ring on my medic-alert band, do you think this will work
Answer:	It may, if you do a really good job prepping the surface and let it dry at least 24 hours...in the past we have JB welded a small metal patch over a hole which we had filled with JB weld, in a low pressure water/maple sap tank...it worked until we could get it to the shop at the end of the season to fit it right.
Question:	When dried, is it smooth or rough
Answer:	If the parts are completely dry and clean for the cost of trying it is worth a try. If you have a leak in an A/C system it is probably oily from the leakage you are trying to seal and that oil would prevent J-B Weld from sticking to the metal surfaces. With A/C parts it is best to replace the parts with new ones and then to properly lubricate the O-rings and seals with correct A/C oil. First be sure to safely remove the refrigerant for recycling and to keep it from destroying the Ozone layer.
Question:	What is it's maximum operating temperature? I have an automotive repair and it will get pretty hot. If not, is there an alternate
Answer:	At a surface area that large I don't think this product is appropriate for your application.
Question:	is this electrically conductive
Answer:	The new version in now made in China and is no were as good as the old version. I had both versions and the old held up and new has not. I still use the JB Weld, but for minor projects at no risk to breaking.

Product features

Permatex Liquid Metal Filler

Easy-to-use filler can be drilled, filed, sanded and painted. Forms a long-lasting, metal-tough bond. Works on metal, wood, and concrete. Excellent adhesion to galvanized metal. Repairs cracks or porosity leaks in cast metal parts. Fills small holes, cracks, and perforations. Resists water, oil and gasoline.

Directions:

1. Make sure the surface to be repaired is clean and free of oil and grease. For best results, roughen the surface slightly with sandpaper.
2. Pierce the seal in the head of the tube. Apply LIQUID METAL FILLER straight from the tube. If desired, use a wet putty knife or spatula to smooth out the repair.
3. LIQUID METAL FILLER will dry in 3 to 4 hours. For filling deep holes, apply LIQUID METAL FILLER. Allow each layer to dry before adding the next.
4. Use Acetone or nail polish remover to clean up excess LIQUID METAL FILLER.

• INCREDIBLE ADHESIVE - When fully cured, Bondic is 100% waterproof, heat-resistant, and non toxic. Dries clear and can be sanded or painted after it hardens to customize any project
• QUICK REPAIRS AND EASY TO OPERATE: The incorporated LED UV light has an easy press button and when the liquid is exposed to the UV light it cures in seconds to form a permanent bond
• BETTER THAN SUPERGLUE - Bondic is not glue and the no solvent liquid formula only hardens when UV light is applied which prevents the hassle of removing hardened glue and means there is no chance of it drying up in the container
• BOND, BUILD, FIX AND FILL ALMOST ANYTHING - Use Bondic on plastic, wood, metal, PVC, steel, rubber, wiring, ceramic, figurines, vinyl, Kevlar, polypropylene, leather and so much more to fix ends of phone chargers, children's broken toys, jewelry, glasses, or your favorite pair of heels
• COMPLETE STARTER KIT - Includes everything needed to start fixing: handheld applicator, LED UV light, and 4 gram tube of liquid adhesive all held in a handy metal case

User questions & answers

Question:	Will this work to fix a broken post on an earring
Answer:	I doubt it very seriously. There is no adhesive I know of that can fix such a tiny joint. Even some hypothetical micro-welding would probably not fix such a small problem. On the other hand, for slightly broader joints and fissures, I highly recommend this product.
Question:	Will it work on plastic models
Answer:	Yes, it will in my experience. It is possible that it depends on the specific type of plastic. The other thing is that since you need to shine the UV light to harden it, you can't put it in the middle of two pieces where there would be no exposure to the UV light. Sometimes I put a little glue on the inside and use Bondic on the outer seams to provide an even stronger bond.
Question:	Is this real Bondic or a knockoff
Answer:	Real Bondic as pictured.
Question:	How long do we shine the light on it
Answer:	Instructions say 3-4 sec. You need to rough up the surface and apply in layers, depending on the repair. More layers, more strength. I repaired a $25 pair of sunglasses where the temple snapped in half. That's not an easy repair. After roughing surfaces up, I first did a butt weld to hold it together. Then I went around the piece, layering the adhesive and overlapping the break an eigth inch or so all the way around, hardening each weld with the light. Eventually you make a band around the break. The adhesive is like very thick syrup but bot sticky. It hardens immediately with the UV light. Obviously if you grab it like a stick and try to snap it, it will! But my glasses fit tightly going on, and I have had no problems since I fixed them, which is all I expected. Afterall, they broke when they were whole and brand new! So I'm getting my money's worth and even epoxy glue didn't hold up when I tried that. Plus the Laser Bond is simple to use with no messy glue!
Question:	Will this work in a 110v outlet
Answer:	Yes
Question:	Description lists Voltage as 220, plug in photo shows a plug for a 110 Volt outlet. What is the correct voltage
Answer:	110

Product description

Permatex Steel Weld Epoxy is a versatile, easy-to-use, multi-metal epoxy two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60°F to 300°F (-51°C to 149°C). Permanent strength up to 4500 PSI. Ideal for use on complex, multi-piece assemblies and for bonding rigid materials, sealing welded seams, filling metal cracks, and mounting metal components.

• Versatile, easy-to-use, multi-metal dark grey epoxy adhesive that eliminates the need for welding or brazing
• Water and solvent resistant epoxy sets in 4 minutes with no clamping needed; permanent strength up to 4500 PSI
• Fills gaps and will not shrink; when cured can be drilled, sanded, threaded or filed
• Temperature Range: -60°F to 300°F (-51°C to 149°C)
• Suggested Applications: Ideal for complex, multi-piece assemblies; bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, and steel; use to seal welded seams, fill metal cracks, and mount metal components

User questions & answers

Question:	Will it work on lawn tractor radiator hole
Answer:	It's worth a try, the stuff is great. I question that there is a water radiator in a lawn tractor, usually they are air cooled.
Question:	Will this work to fix my cars side view mirror because jb weld was an epic fail
Answer:	This is a lot stronger then jb weld. but use a mesh when using it. Makes it better. Ultimately I would say to go on am-autoparts.com You can get the whole thing for under 100 and free shipping.
Question:	What is the color, black, gray, clear, tan
Answer:	dark Grey
Question:	Does this epoxy do well in heat? Specifically exhaust/muffler heat
Answer:	I used to heat to remove the epoxy when it didn't hold as well as I had hoped. I don't think this would work with a muffler.

Product features

Permatex Steel Weld Epoxy

Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Permanent strength up to 4500 PSI. Ideal for complex, multi-piece assemblies and for bonding rigid materials. Use to seal welded seams, fill metal cracks, and mount metal components.

Product description

SteelStik is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. SteelStik sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. SteelStik cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300ºF.

• J-B WELD STEELSTIK: A hand mixable two part epoxy putty stick that is steel reinforced & non-rusting to quickly repair or rebuild anything made of metal! J-B Weld SteelStik is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, SteelStik takes 5 minutes to set and cures in 1 hour. J-B Weld SteelStik set and cure color is dark grey.
• PRODUCT FEATURES AND STRENGTH: J-B Weld SteelStik has lap shear strength of 900 PSI, can withstand continuous temperatures up to 350F (176C ) and intermittent temperatures of 450F (232C), and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured. SteelStik can be molded, shaped, sanded, drilled and tapped.
• SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Fit Type: Universal Fit

User questions & answers

Question:	Starting to get rust damage on my hatchback, by the rear hinges, looks aren't important, will this seal and stop my car from smelling like a wet dog
Answer:	Works well as a filler. I don't think it will work as solder.
Question:	can it be used with plastic
Answer:	Smooth. It doesn’t dry hard like metal but somewhat harder than a silicone product. I smooth mine out before it dries.
Question:	can this be used on glass
Answer:	The pot I repaired had been used several times for baking in an oven with 450 degree or higher temps. It has been used numerous times to boil water for canning (Can you guess it is my favorite pot) and is still going strong. I believe in the permatex liquid metal and would recommend it for any metal repair.
Question:	Will this work with plastic
Answer:	No

Product features

Epoxy Putty

SteelStik is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. SteelStik sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. SteelStik cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300ºF.

Additional Attributes

• Chemical resistant against petroleum, hydraulic fluids and may other harsh chemicals when fully cured.
• NSF Certified – Safe for contact with potable water.
• Can resist continuous temperatures of 300°F (149°C) intermittent temperatures of 450°F (232°C).

Product description

J-B Weld High Heat Epoxy Putty High Heat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. High Heat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400 degrees F and intermittent heat exposure to 550 degrees F. Use on: Automotive Metal And more Instructions 1. Cut: Remove required amount of putty. 2. Mix: Thoroughly knead putty with fingers to a uniform color. 3. Apply: Press putty firmly to the surface to be repaired. J-B Weld is proudly made in the USA

• J-B WELD HIGHHEAT: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild materials that will be exposed to high temperatures in automotive and industrial maintenance applications. J-B Weld HighHeat is designed for DIY repairs on exhaust manifolds, tail pipes, mufflers, engine blocks, duct work and other various high temperature projects.
• CURE AND SET TIME: After kneading the two part formula together by hand, HighHeat takes 1 hour to set and cures in 8 hours. J-B Weld HighHeat set and cure color is machine grey.
• PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat has lap shear strength of 800 PSI at room temperature and 600 PSI at 400oF (204oC) or more. HighHeat is able to withstand continuous heat up to 450oF (232oC) and intermittent heat of 500oF (260oC). HighHeat is 3x stronger at higher temperatures than conventional epoxy puttys and can be tapped and drilled.
• MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• 3 times stronger at high temperatures
• Withstands continuous heat up to 450 degrees Fahrenheit, and intermittent heat up to 500 degrees Fahrenheit

User questions & answers

Question:	J-B does NOT recommended this for exhaust manifold use, per their site FAQ. My truck's manifold is cracked: Would furnace cement work on such a crack
Answer:	I am not familiar with furnace cement, but I would doubt such cement would stand the pressure from leaking gasses. However cast iron exhaust manifolds canbe successfully welded.
Question:	I striped out an oil drain plug on a generator motor. But there is a second drain on the other side of the engine. Will this seal in oily environment
Answer:	if you are thinking about plugging the hole, yes, but if you have access to the inside of the pan i would use it to attach a plate to the inside. you could also grind down the outside free of rust / dirt and use it to bond a plate to the outside. i would be concerned about just using it as a plug, where using it to bond something to the pan would not span a 1/2 to 5/8 in. gap. you might even use a quarter or a nickle or something stainless that will not rust. after it sets, hit it with some high temp paint.
Question:	can you use this to seal a leaking transfer case seal? (would work ? instead of having to replace the seal
Answer:	I guess it depends on if you ever want to fix it right. Once you use this stuff thats how it will be forever, it's not pliable or removable
Question:	Will this fix a hole in a muffler
Answer:	I used it on the muffler and tailpipe on my Honda four wheeler and it has been holding up well. If fact that's what I bought it for originally. The holes I patched you could cover with a dime.

Product features

Epoxy Putty

HighHeat is a hand-mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sents in 1 hour at room temperature. After 8 hours it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400°F and intermittent heat exposure of 550°F.

Product description

Item Package Quantity:3