12 best instant glues

Product description

The gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Service Temperature 65 Degrees Fahrenheit to 220 Degrees Fahrenheit.

• GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
• ANTI CLOG CAP: Helps keep glue from drying out. It's Gorilla tough use after use
• IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
• FAST-SETTING: Dries in 10-45 seconds. No clamping required
• VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials

User questions & answers

Question:	Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible
Answer:	Hello this is Christopher Stafford of reflections, unfortunately I wouldn’t recommend this item for your particular application. I would recommend Loctite 404. Thanks for your message and interest.
Question:	EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks
Answer:	Hello, Gorilla Super Glue Gel is not recommended for use on foam surfaces. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #315176. Thank you, The Gorilla Glue Company
Question:	Will it glue leather to metal
Answer:	Hello, Gorilla Super Glue Gel will work on leather and metal surface. For smooth surfaces, we recommend roughing the surface to provide a texture for the glue to adhere to. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #194392. Thank you, The Gorilla Glue Company
Question:	What's the difference between their super glue gel and their super glue
Answer:	Hello Ryan N.,Gorilla Super Glue Gel is a thicker consistency that is perfect for applications on vertical surfaces. Our Gorilla Super Glue and Gorilla Super Glue Gel will have the same holding power. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company

Product description

Loctite super glue all purpose adhesive, Loctite, super glue, 10 G capacity, longneck bottle packing, 20 G/L VOC, 70 mpa viscosity, liquid, transparent colorless to straw, 12 - 24 hr. Full bond drying time, sharp, irritating odor/scent, 176 - 200.12 deg F flash point, media: carbon dioxide, dry powder, foam, composition: ethyl 2-cyanoacrylate. Longneck bottle features a precision tip, which allows controlled application without dripping. Easy-open cap with a metal pin that cleans and seals the nozzle for a clog-free performance. Use to glue hard to reach surfaces. Bonds a variety of materials. Dries clear and sets without clamping. Resistant to moisture, most chemicals and freezing temperatures.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite 10-Gram Super Glue Liquid features a precision tip which allows controlled application without dripping, thus less mess. It has an easy-open cap with a metal pin that cleans and seals the nozzle for a clog-free performance. The long nozzle is ideal for gluing hard to reach surfaces. The finger-friendly bottle keeps fingers glue free, as well as allows for a continuous flow or a precise drop of glue. It bonds a variety of materials including leather, ceramic, rubber, paper, metal, china, wood and most plastics. Loctite 10-Gram Super Glue Liquid dries clear and sets without clamping. It is also resistant to moisture, most chemicals and freezing temperatures. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and o-rings
• Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as plexiglas, polycarbonate, polystyrene and PVC
• Sets in seconds and dries transparent

User questions & answers

Question:	Will this work on a glass picture frame that cracked
Answer:	I can’t guarantee it but it has worked on everything I have used it on from fabric to metal to ceramic.
Question:	How much heat can it handle
Answer:	No idea. I haven't used in that capacity. Best contact the mfg.
Question:	Is this the best glue for a porcelian figurine...the head broke off...Thank you for your answers...Susan
Answer:	I definitely would think that it would work well for what you are trying to glue. Super Glue has been around a long time because it is a good. In the past it was just messy to use and would dry out after a single use. This type of container has changed all that.
Question:	My question requires a layman-"expert". A mechanic cracked my plastic turn signal arm,now, it is hanging from the wiring. Best glue for this
Answer:	Replace the arm

Product features

Strong Formula

Loctite Super Glue Liquids work fast and hold strong. Liquid super glues have low viscosity and are ideal for bonding smooth, close-fitting surfaces.

Multipurpose Use

Use on a variety of surfaces including metal, leather, cork, ceramic, wood, chipboard, fabric, paper, cardboard, rubber, and most hard plastics.

Precise Applicator

Longneck applicator with precision tip allows controlled dispensing even in hard-to-reach areas. Self-piercing, screw-on cap keeps air out so glue stays fresh. The pinpoint nozzle stays clog-free for ongoing performance.

• ★ One Glue To Rule Them All – Glue Masters offers premium quality industrial strength Cyanoacrylate Resin with the strongest bond on the market for your money. With a fast cure and extended shelf life, you can’t go wrong with us!
• ★ A True Quick Fix – Settles in just under 60 seconds, this glue is the epitome of easy. Gently apply a small amount of our Instant Glue, and watch the magic happen. Our well balanced thick viscosity offers more control to the user while still giving you a nice even flow to get the job done right without the mess or hassle.
• ★ A Hobbyist's Best Friend – Helping bring your models, puzzles, and more to completion is our goal! Our glue is the model builder’s first pick for a quality clear hold and a flow you can trust with those delicate planes, trains, and boats. Don’t take our word for it, just take a look at our customer reviews and see for yourself!
• ★ Versatility – From building scale models to repairing shoe sole, fabric, wood, and more, we’re THE glue for general household repairs, carpentry and whatever else you need fixed! It’s truly a must have for anyone’s toolbox. Our 2oz container offers you enough fixing power for any job, large or small.
• ★ Warning – Not to use on fabrics or clothing and always ware eye protection, working in a well ventilated area.

User questions & answers

Question:	will this bond fabric to glass
Answer:	Most definitely. I've used it for bonding various projects. Door seals, jewellery, shoes even! and its incredibly durable and will dry clear, use it sparingly.
Question:	Could I use this for turquoise inlay in wood
Answer:	Should work well for that purpose. I use on wood all the Time.
Question:	what does cps stand for
Answer:	Hello! CPS (unit of centipoise) is a unit of viscosity. We have several viscosity levels in our 16oz format (5 cps, 50 cps, 100 cps, 300 cps, 700 cps, 1500 cps): from 5 cps - super thin to 1500 cps extra thick. It gives you better modulation capabilities depending on your application from curing time and penetration perspective.
Question:	Hi! how can the applicator tip be kept clear? and what is the shelf-life - how long before he whole bottle soldifies...? thank you
Answer:	After you cut the nose and used the ca, put the bottle vertically and squeeze it gently to make sure there is no remaining glue in the applicator. Wipe it and put the cap on. Best way to prolong the shelf life - keep it refrigerated. It will not dry out.

Product description

FastCap 2P-10 Super Glue Adhesive 2.25 Ounce Thick and 12 Ounce Activator Combo Pack

Great for assembling a kitchen chair or repairing a broken table leg, this adhesive kit is works on a wide range of surfaces from wood to plastic. It includes a 2-ounce bottle of adhesive, and a 12-ounce spray can of activator.

FastCap’s two-part bonding system takes a mere 10 seconds to execute. Simply apply the adhesive to one surface and spray activator on the other. Pressing the two sides together creates a firm, permanent bond that endures all weather conditions. FastCap estimates a bond’s curing time as 30 seconds. In addition, this powerful glue won’t clamp--making it is ideal for use on hard joints.

A special no-clog cap helps prevent glue clumps. Refills of both activator and adhesive are available from FastCap. The company also offers a two-part debonder for extricating excess glue residue for clean, professional-looking results. This FastCap kit arrives in a protective, hard-shell case. When shipped, it measures 4 by 4 by 4 inches and weighs 1-1/4 pounds. --Jessica Reuling

From the Manufacturer

With 2P-10 Solo kit from FastCap you can easily glue the hardestjoints in cabinetry without clamping

• Powerful adhesive kit for carpentry or other bonding projects
• Easy to use--spread adhesive on one item, spray activator on other, hold together for 10-seconds
• No-clog cap
• Includes 2-ounce bottle of adhesive, 12-ounce can of activator; products work on most surfaces
• Kit measures 9.25x4x2.5 inches; weighs 1-1/4-pound when shipped

User questions & answers

Question:	Is this cyanoacrylate
Answer:	Yes. Very thick . Not the same stuff in those little tubes you use for household repairs. This stuff sticks like crazy. Worked very well for me. Bonds very fast with the activator.
Question:	Has anyone used this adhesive on a cracked granite counter top
Answer:	Yes, I have used it. The company video shows a 3/4" counter slab cracked in half the 24" way and gluing back together in seconds. I have not tried that, but I have used it to glue corners and chipped bullnose. I have glued broken 12 x12 granite tile back together many times with no problems.
Question:	can you stain over it? and does it hurt pre-finished products
Answer:	We used it to do crown molding corners, works fantastic. did not use it on prefinished wood. You should read instructions for use or watch a you-tube video on this product. Would definetly purchase again. Helps prevent splitting the corners . Both inside and outside corners.
Question:	can I use this product on balsa wood
Answer:	Yes, it works really good.

Product features

Hassle-Free Gluing

Only takes seconds, the FastCap 2P-10 Super Glue Adhesive 2.25 Ounce Thick and 12 Ounce Activator Combo Pack is ideal for assembling a range of work pieces from plastic and glass to wood and metal. All you have to do is simply apply the adhesive to one surface and spray activator on the other and put minimal pressure to stick the two pieces together. With this glue and activator, you will be able to clamp work pieces and hard joints. Moreover, the FastCap 2P-10 Super Glue Adhesive 2.25 Ounce Thick and 12 Ounce Activator Combo Pack is super easy to use!

Product description

The All Purpose Formula is great for everyday household repairs. Our Gel Formula is ideal for use on ceramic and pottery and can also be used on wood, leather, rubber, metal, plastic and vinyl. The no-run Gel Formula lets you glue vertical surfaces without a drippy mess. It is perfect for filling gaps on porous surfaces and for gluing together two mismatched surfaces. Our self-piercing nozzle makes opening the tube a breeze.

• Brand NewExcellent Quality.
• All purpose formula is great for everyday household repairs
• Works great on wood, rubber, glass, ceramic, and plastic

User questions & answers

Question:	When is shipping says in stock but still waiting
Answer:	it will take longer due to weather and local conditions. Jim
Question:	Can this be used for prosthetics directly to the skin
Answer:	No these are not recommended for use on human skin in any way, shape or form. The chemicals used in these are very harmful to human skin.
Question:	Does it work on glass
Answer:	Only on certain types of glass, not on all types. I tried to use this to glue my GPS holder mount on my car windshield and it came right off.
Question:	How many ounces in each little bottle
Answer:	Each package contains 2 grams, or 0.07 ounces of glue.

Product description

Its high strength and quick set time make Gorilla Super Glue the go-to adhesive for a variety of household projects. Developed for long-lasting repairs in an instant, the clear glue dries in 10-45 seconds. Our Super Glue is reinforced with rubber for increased impact resistance to handle bumps and drops. We call it Impact-Tough because the reliable bond stands up to wear and tear unlike any other instant glue. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to Gorilla Super Glue's high-performance cyanoacrylate formula, we've added an anti-clog cap with a metal pin inside ensuring an airtight seal for maximum reusability. It's Gorilla tough, every time. Gorilla Super Glue should not be used for intentional contact with the skin. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.

• Impact Tough: Unique rubber particles increase impact resistance and strength
• Anti Clog Cap: Keeps glue from drying out. It's Gorilla Tough use after use
• Fast-setting: Dries in 10-45 seconds, no clamping required
• Versatile: Bonds plastic, wood, metal, ceramic, rubber, leather, paper, and more
• Best for instant repairs on smaller indoor projects

User questions & answers

Question:	is this non-conductive? safe to use on electronics
Answer:	I do not believe it is non-conductive and therefore not safe to use on electronics.
Question:	Does Gorilla Super Glue mend glass dishes
Answer:	I used it to repair a glass trinket and it worked. It is very strong and has lasted for over six months. I am not sure if it would work on a glass dish that you would use for meals.
Question:	Does it work on porcelain
Answer:	Hello, Gorilla Super Glue will work on porcelain surfaces. Remember that only one drop per square inch is needed to form a bond. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #217782. Thank you, The Gorilla Glue Company
Question:	Is Gorilla Super Glue good for wooden scale model ship building
Answer:	If you apply small amounts then 'yes'. The nice thing about this compared to traditional super glue is the thickness. This is a bit less viscous than standard super glue so it will stay where you put it. That said, I would probably use a wood glue or hide glue on my woodwork. I like the original Gorilla glue for that.

Product description

Hot Stuff Original is Satellite City's thin CA glue with a viscosity (3cps) similar to water and no surface tension. When you have parts that fit exactly together, first get them in position, then run this instant glue along the crack, and it will wick right in. If you have tight-fitting joints of non-porous material, Hot Stuff thin will give you the best results as it will not create any extra space between the pieces, and since you get the parts aligned before applying this instant glue, you can be sure they will be perfectly in place when the glue cures. Super T MEDIUM gap-filling CA glue has a viscosity (200-300 cps), similar to syrup, and it is perfect for gluing somewhat porous materials and pieces which have small gaps between them. Super T instant glue cures at a slower speed (10-25 seconds) than Hot Stuff. You can bond wood, metal, rubber, nitrile, composites like carbon fiber and Kevlar, many types of plastics, and more. To bond two parts together, apply the Super T CA glue to one part and accelerator to the other part, then push together and hold tightly for around 30 seconds. Special T THICK gap-filling CA glue (green label) has a viscosity (1150-1500) similar to honey. Special T works great when you use it to bond both porous and non-porous parts, and it can fill larger gaps than our Super T medium CA glue. It is best used for parts that are missing pieces or don't fit very well together. You can bond the same materials as with our other CA glues- wood, metal rubber, nitrile, composites, many types of plastics- and Special T is effective even when a poor fit makes parts look impossible to bond. The gap-filling capability is very useful when there is a large chunk missing from a surface- filling that space with Special T can preserve the structural integrity, seal the area from moisture and contaminants, bond something to the exterior that would not fit otherwise, cover and protect jagged edges, and improve the look of the surface.

• You will receive Original Thin Glue 2 oz, Super T Medium Glue 2 oz and Special T Thick Glue 2 oz
• Works with wood, metal, rubber, nitrile, composites, many plastic types, and more
• Can bond porous and non-porous materials
• Original Thin bonds in 3-5 seconds, Super T bonds in 10-25 seconds, Special T bonds in 20-60 seconds
• Viscosity: Original Thin has 3 cps, Super T has 200-300 cps, Special T has 1150-1500 cps.

User questions & answers

Question:	Can this be dyed to fill small holes in a wood slab
Answer:
Question:	Can this be dyed to fill small holes in a wood slab
Answer:
Question:	Will this work on rock? I want to glue some copper powder into a channel i ground into a rock for an inlay effect
Answer:
Question:	Does the glue harden in the tip or bottle if you don't use a lot or often? I usually throw more away than I use
Answer:

Product description

Maxi-Cure extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars. INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. Maxi-Cure is very popular in the archery industry for fletching, which is the bonding of feathers and vanes to the ends of the aluminum and carbon fiber arrow shafts. Directions in 5 different languages.

• Bonds Metal, Plastic, Wood, Ceramics, Rubber, Leather, Glass, and more
• Combo Pack of CA and Accelerator
• Proud Sponsors of Wounded Warrior Project

User questions & answers

Question:	Does this bond silicone (platinum cure or rtv or both
Answer:	No it will not.
Question:	Anyone use this to fill a gouge in a bowling ball
Answer:	Bowling balls are usually urethane or polyester resin based. You are probably better off using epoxy for such a repair. JB Weld should work. If the gouge was huge and the bowling ball expensive, you could spring for a polyester resin based product such as what you would use for fiberglass work. Only problem is it would be a bit thin.
Question:	does the accelartor leave marks on the wood? Using it for picture frames
Answer:	No, the accelerator did not leave marks on the wood when I used it on hardwood stairway handrails to do a return.
Question:	Will it bond metal to gemstones
Answer:	Not if you're talking about Infinity Gems and Gauntlet. No CA adhesive is necessary as the gems will attach themselves on a quantum level to to gauntlet. Take care, however, as once placed no amount of solvent will detach gems, so I recommend using worthless gems like diamonds for a 'fit 'n finish' test.

Product features

Bob Smith Industries BSI-157H Maxi-Cure/Insta-Set Combo Pack

Maxi-Cure extra thick CA is one of the best CA for most plastics, including GE’s Lexan Maxi-Cure is one of the best choice for plastic model assembly. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.

Insta-Set is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. Insta-Set in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with Insta-Set significantly enhances a joint’s strength. For difficult to bond materials, Insta-Set can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. It is compatible with all surfaces, even clear plastic and white foam.

Product description

Hot Stuff Original is Satellite City's thin CA glue with a viscosity (3cps) similar to water and no surface tension. When you have parts that fit exactly together, first get them in position, then run this instant glue along the crack, and it will wick right in. If you have tight-fitting joints of non-porous material, Hot Stuff thin will give you the best results as it will not create any extra space between the pieces, and since you get the parts aligned before applying this instant glue, you can be sure they will be perfectly in place when the glue cures. Hot Stuff Original is also ideal for filling and stopping the spread of splits and hairline cracks in furniture, gunstocks, wood being turned on a lathe (such as pen blanks), and stone. To strengthen stone and porous wood, apply Hot Stuff to the entire surface and allow it to soak into the pores and cracks- you can also use this instant glue on carbon fiber or fiberglass cloth instead of using resin! Hot Stuff CA glue will harden other types of cloth as well- in fact, professional dancers at top ballet companies use Hot Stuff to strengthen the material of their pointe shoes. Curing time is three to five seconds between tightly fitting, non-porous parts. We recommend using NCF Quick accelerator to ensure a complete cure of the bond. Store unopened bottles in the freezer to extend shelf life. Bottles of which have been opened will experience a shorter shelf life if they are continually taken out of and put back into cold storage. Pro Tips slip over the spout to allow even more precise application of our glues than the spouts that come with the bottle. A Pro Tip has the same diameter from its base to the tip, so that if it clogs and you have to cut it down, it will still apply the glue just as precisely. Each box comes with 12 Pro Tips.

• You will receive Hot Stuff Thin Instant Glue and Box of 12 Hot Stuff Pro Tips
• Bonds in 3-5 seconds; Can bond non-porous, tightly-fitting materials or harden porous material
• Water-thin for penetrating and stabilizing hairline cracks
• Works with wood, metal, rubber, nitrile, composites, many plastic types, and more
• Pro Tips slip over the spout to allow even more precise application, same diameter from its base to the tip

User questions & answers

Question:	What material won't this stuff stick to? i like to assemble small parts on a non-sticking surface so that my fingers stay out of contact
Answer:	This glue sticks to everything. I use the heavier formulation instead of this thinner one.
Question:	What material won't this stuff stick to? i like to assemble small parts on a non-sticking surface so that my fingers stay out of contact
Answer:	hot stuff sticks more or less to anything -- wood metal - plastic --and you are right keep your finger away I had them stuck together --- is a challenge to get finger apart... use accelerator ro make it instantly cure..
Question:	Does anyone know how I can reach the seller, I did not receive any tips but paid for them
Answer:	hot stuff is made by satellite industry -- I am sure they would answer any question you have
Question:	can this be used as a nail repair glue
Answer:	I would not recommend it. The glue is very thin, allowing it to flow. It can "get away" from you really quickly. And the glue can burn you skin. I do my own nails and wouldn't use it on mine.

• Easy Bonding - The simple to use instant glue will make your projects so much easier! After cleaning both surfaces, just spread the 2-3 drops of CA glue per square inch on one surface & spray the glue activator spray on the other, wait 10 seconds and then bond the pieces 5-12 seconds together.
• Powerful Professional Adhesive - Our two part CA Glue with activator will help you achieve a clean and professional result no matter what your project is. Great for industrial and personal projects, this super glue will give you the bond you need!
• Quick Cure Time - No time to wait? With our instant bond adhesive, your project will be ready in seconds! Thanks to our special CA Glue Activator, your project will be ready in 5-12 seconds. Without the activator, cure time can take up to 2 minutes.
• Clean Application - The aerosol super glue accelerator provides a fine mist that is easy to control, and thanks to the viscous liquid of the glue your project won’t be a mess. Just a little bit of two part super glue will be plenty!
• Compatible With Multiple Materials - This cyanoacrylate accelerator is suitable for use on a variety of materials from wood to glass & stone to metal. Avoid using the cyanoacrylate glue on nonstick surfaces and polyethylene products.

User questions & answers

Question:	Is it foam safe
Answer:	If you look at the picture in the description, foam does not have a check mark next to it. CA Glue is not foam safe. You have to buy special foam compatible CA.
Question:	Is it harmful to the body
Answer:	Yes if get glue and spray together on body, only way have to wear off. If just glue come off with thinner if you get it soon.
Question:	Is the glue bottle only supposed to be half full
Answer:	I dont know mine was less than half full. I tried this glue and did not work very well and finally gave up on it.
Question:	Does the activator have a strong odor
Answer:	This glue has a strong and characteristic odor.

Product features

Finish Projects

Whether you need to fix broken furniture, repair a vase, fixing carpentry, kitchen & bathroom cabinet installations or finish up your hobby projects, our CA glue can help you get the job done.

Lasting Results

Our super glue and accelerator spray creates a permanent bond between surfaces, ensuring your finished project will stand the test of time. Usable both indoors and outdoor, and in both personal and professional applications, making magnet, souvenir, plastic models, making models, hobby, DIY, carpenters, decorators, cabinets, architects, students this 2 part super glue is necessary in your toolbox.

Bonds In Seconds

No more waiting on your project to dry with our instant glue! When you use the cyanoacrylate glue activator, your project will be cured and ready for use in just 5-12 seconds! Without the activator, the cure time increases to just 2 minutes. Within just seconds you can tick another project off the list!

Precise Application

With the fine spray from the aerosol can of the two part super glue and narrow tip of the glue activator, you can expect a clean and attractive finish from our adhesive. The thick, viscous liquid can even be applied on vertical surfaces. The instant glue stays where you put it and dries clear. A little bit of the instant bond adhesive goes a long way, making it good for your wallet, too!

Bonds Many Surfaces

While our super glue kit is not ideal for use with polyethylene or polypropylene plastics, the list of compatible bonding surfaces is long. Our glue and activator easily bonds with many different surfaces including glass, stone, tiles, brick, wood, MDF, chipboard, ceramic, and more.

Product description

Difference Between Super Glue and CA Glue: Super glue, cyanoacrylate, and CA glue are all different names that describe the same instant adhesive. Various user groups adopt different names for them. For instance, woodworkers, model-builders, serious hobbyists and skilled crafting pros use terms like cyanoacrylate adhesive or CA glue. Commercially, most know the adhesive as superglue.



Starbond Super Fast Thin CA

Starbond Super Fast Thin is a thin viscosity CA Glue. The watery-thin cyanoacrylate glue infiltrates hairline fractures, pores, and narrow slots filling any empty voids. Thin super glue is suitable for strengthening porous and fragile material: soft wood (balsa), ceramics, unpolished rocks and minerals, and fossil bones. During powered inlay applications, the glue stabilizes the material through capillary action. In addition, the instant adhesive will rapidly soak into soft, porous objects until full saturation is achieved.



Used In:

Woodturning and Pen Making: High gloss CA finish and pen finish for a hard, clear, waterproof coat. Metal and turquoise powered inlays

Woodworking: Repair and fill wood cracks, stabilize bark inclusions and soft punky wood

Guitar Repair and Assembly: Guitar inlays on the headstock, body, and fretboard, install bindings and purflings on stringed instruments

Fossil Preparation: Stabilize and strengthen fossils before extraction

Lapidary: Repair small chips and cracks in stone, cabochons, jewelry making and repair

Furniture: Refinishing and antique restoration

Ceramic repair

Marble, Granite and Quartz repair

Hobby Models: Bond fiberglass to balsa wood, assemble balsa planes and boats

Taxidermy: Ensures secure attachment of limbs and adheres skin to limbs



Compatible With:

Wood Metal Rubber Leather Ceramics Gemstones Rocks & Minerals Carbon Fiber Fiberglass PVC and Most Plastics

• ✅ PREMIUM ETHYL CYANOACRYLATE SUPER GLUE - LAB TESTED FOR OPTIMAL PERFORMANCE: High performance industrial grade adhesive. Water-thin CA glue goes deep to infiltrate and stabilize through capillary action.
• ✅ EXTRA SUPPLIES: applicator caps, clog-free stopper, and a bag of micro-tips for precision. The extra applicator caps are in case of future clogs, the clog-free stopper has a tiny pin to prevent clogs, and micro-tips provide the perfect extension for tiny cracks.
• ✅ "WICKING TYPE" ADHESIVE: Great for woodturning finish, pen making, hobby, fossil prep, inlays, hardening, stabilizing, and bonding close-fitting parts. Penetrates the finest micro-fractures, pores, and cracks through capillary action.
• ✅ PROPERTIES: Viscosity: 2-3 cPs (meaning the thickness of the liquid is similar to that of water). Penetrating abilities of up to 0.002" in size.
• ✅ LONG LASTING SUPERIOR SHELF LIFE: Starbond CA glues have a shelf life of several years in the cold. Store the bottle under 40°F before AND after use to qualify for our 30 Month Shelf Life Warranty. If the glue does not last, we will provide a 100% refund or replacement.

User questions & answers

Question:	Would this product be good to use on 3d printing filaments such as pla
Answer:	any CA glue will bond to pla and most other FDM filament.
Question:	Does it give out white residue like most superglue do
Answer:	The white residue is a result of the glue drying too fast. This can happen when there are contaminants, dirt, oils, or excess moisture present on a surface. Therefore, it's advised that you properly clean the surface before applying the glue. Other times the white residue may appear is when too much glue is applied to a surface and the user wipes the glue off with thin tissue paper. In such case, the glue may scratch off tiny pieces of the tissue paper, leaving some of the tissue fibres on the surface. To conclude, this is a superglue and it can leave a white residue. But, if you consider the details explained above, you'll have no problem.
Question:	Will this hold the strap Into a rubber beach sandal
Answer:	I’m sure it would but I’m not sure for how long. This is not really a flexible bonding material. If I were you I’d use rubber cement.
Question:	is the finish waterproof
Answer:	I am not an engineer but I will relay my experience. I make stick pens from wood (not Kits). My previous experiences with other finishes were all failures when I tried to carry them in my hot sweat soaked South Carolina pockets. I switched to a Starbond CA glue finish and it has held up 100% to all of my normal carrying. I have never tried to submerge them but in all of my normal carrying in wet nasty pockets all day the finish seems impervious to the elements. I did have one pen suffer some minimal deterioration when I lost it in the grass and recovered it a month later after it sat in the grass through a month of thunderstorms. Hope this helps. John

Product features

The Complete Package

All-in-One Package: Comfort — Precision — Ease : applicator caps, clog-free stopper, and a bag of micro-tips for precision. The extra applicator caps are in case of future clogs, the clog-free stopper has a tiny pin to prevent clogs, and micro-tips provide the perfect extension for tiny cracks.

Create A Beautiful Wood CA Finish

Want a super high gloss finish for your special wood project? The All-in-One Starbond Super Fast Thin Premium CA glue kit includes the essential supplies for a super-easy application.

Stabilize Punky Wood and Bark Inclusions

Restore soft, punky wood and bark inclusions to an usable condition by stabilizing with thin viscosity CA glue.

Repair Cracks in Wood

By combining sawdust as a filling agent with Starbond Thin CA Glue, simply fill and repair cracks faster than ever!

Product description

Gorilla construction adhesive is a tough, versatile, and water resistant formula offers that instant grab, superior strength, and bonds virtually any surface!

• ALL PURPOSE: Construction Adhesive is a tough, versatile, and water resistant formula that offers instant grab, superior strength, and bonds virtually any surface!
• INSTANT GRAB: Offers instant grab and holds in 0 seconds.
• EASY TO USE: Is easy to dispense, has a low odor, and is easy to clean up with soap and water!
• PAINTABLE: Gorilla Construction Adhesive is paintable once dried.
• INDOOR / OUTDOOR USE: Is water resistant, and for works great for either Indoor or Outdoor use.

User questions & answers

Question:	Can the Heavy Duty or Ultimate be used in gluing two cast concrete parts together (a birdbath base
Answer:	Hello, You can use either Gorilla Heavy Duty Construction Adhesive or Gorilla Heavy Duty Construction Adhesive Ultimate for that application. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #291946. Thank you, The Gorilla Glue Company
Question:	How much time exactly does it take this glue to cure
Answer:	I used 24 hours. Worked like a charm.
Question:	Can this be used on fiberglass tub surround
Answer:	Hello, Gorilla Construction Adhesive can be used on fiberglass surfaces. This product is water resistant, not waterproof. For structural applications, we recommend using the adhesive in conjunction with mechanical fasteners. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #300530. Thank you, The Gorilla Glue Company
Question:	Can this be used to adhere 1/2” thick cork tile to a painted wall
Answer:	I’ve used it once and it failed miserably. Was trying to attach the bowl to the stand on a plastic bird bath to make it more secure. It was kept in the basement for one week to dry a stay out of the elements. It never dried completely. Just ended up more like toothpaste or denture cream. I would not recommend this particular item. Gorilla has some fantastic items but this isn’t one of them.