12 best wood filament 3d printers

• HIGH COMPATIBILITY: AMOLEN PLA Filament is compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear.
• PREMIER MATERIAL: Made from PLA and recycled wood particles. Prints just like normal PLA with gorgeous surface of wood color and texture. Extrusion temperature range: 190 - 220°C.
• DIMENSIONAL ACCURACY: Diameter variance of no more than 30 microns for consistent feeding and better 3D prints.
• SMOOTHLY PRINT: AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping.
• HIGH PERFORMANCE: Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.

User questions & answers

Question:	approx how many feet on a 225 gram spool
Answer:	About 90ft. Based off the idea that a full 1kg spool is about 360ft.
Question:	Is this sandable
Answer:	I do not believe there is wood in this filament you would be sanding the PLA material which I have done with the diamond impregnated sponge pads with water.
Question:	Is the bonze filament just bronze colored pla or is it bronze infused pla
Answer:	Just colored
Question:	Marble clogs every print. prusa mk3s on 210c. any special settings
Answer:	I’ve used this on both my Ender 3 and my ANYCUBIC I3 MEGA, and haven’t had a problem with either. Some suggestions that might help: 1) Slow the speeds down so the filament has time to melt. 2) do not use ANYTHING metal on the tip to remove the starting filament. I used to use tweezers and found I would have problems with clogging. Now I use a piece of filament to remove the “drip” and haven’t had any more problems. If you think about it, the opening is very small and tapered. That means at the very tip it is extremely thin and anything thicker and metal will deform the opening. Using a piece of filament, the worst that could happen is the piece melts, but it won’t deform the opening. You probably need to replace the tip.

Product features

AMOLEN 3D Printer Filament Walnut PLA 1.75mm

• Material: PLA
• Color: Dark Wood/Walnut
• Accuracy: +/- 0.03mm
• Net weight: 1KG/2.2LBS

Real Wood Feeling

There is 20% real wood powder in walnut wood filament,so that it has a wood-like surface ,which is true,frosted and warm feeling.Let's print and get a outstanding wood result.

• 1KG (2.2 lb) Spool
• Wood 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 175°C - 220°C (347°F - 428°F)
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20"

User questions & answers

Question:	Anyone know the settings if used on a craftbot
Answer:	I'm not familiar with the Craftbot 2, but just use the same basic settings you'd use for PLA and make minor adjustments from there. That has worked well for me.
Question:	Do i need to worry about ventilation with this filament? i've only printed with pla
Answer:	No. This IS PLA. Its just fine wood dust mixed in with the PLA. I has no smell while printing just like PLA and you can use the same settings as PLA. I found that this sticks too well to BuildTak. I would suggest Kapton tape or PET film.
Question:	can this be used with a da vinci 1.0 printer. I have the ability to mod the temperature, jus wondering if any one ever tried? What temp setting
Answer:	As long as you can mod the Temperature, and speed settings you should be fine. I print this at about 220c but am still dialing it in. start off printing it at like 60% normal speed for good results, and despite what you may see other places be sure your infill is at 25-30% in parts you want filled, as the material doesn't bridge the best.
Question:	Do I need an upgraded nozzle
Answer:	I've printed well over 300 reels of Hatchbox wood filament in a production setting. Wood filament IS abrasive, and will rapidly degrade standard brass nozzles. There will be a noticeable degradation in print quality in as little as a single reel, and print quality will be unacceptably compromised before you finish a second reel. If you plan on printing much wood, you'll need to invest in hardened nozzles, period. Plated brass is better, but even that will fail after 6-8 reels. Hardened tool steel nozzles are much better, and last me 25+ reels before replacement is necessary.

Product features

Tech Spec

Each package of PLA Wood contains a 1 kg (~2.20 lbs) spool at 1.75 mm filament diameter with a dimensional accuracy of +/- 0.03 mm). We recommend printing at a nozzle temperature of 175°C - 220°C (347°F - 428°F).

Multi-Use

Make more than just models with 3D printing! Design and bring to life your inventions and other functional pieces for use in everyday applications like custom phone cases, wallets, salt shakers, sculptures, candle holders, dog tags and tons more. The sky's the limit! Your creativity begins with Hatchbox filament.

Performance

Polylactic acid is loved for its easy, odorless printing with minimal warping. With no heated bed necessary, Hatchbox PLA is a green-friendly choice that can be used with many styles of printing to create strong, smooth and glossy prints in a variety of bold colors.

Innovation

At Hatchbox, we are proud to provide the tools you need to innovate in life and in work whether a seasoned printer or just starting out. We help you push your ideas forward with the best in 3D printing materials so you can make your designs a reality.

Quality

Hatchbox 3D filaments are loved by the printing community for their high-quality composition, offering clog, bubble and tangle-free printing. Every spool is assured to offer the highest caliber of performance possible. That’s the Hatchbox promise.

Materials

No matter what your latest project calls for, we have a filament to suit any need, from heat resistance and durability, to flexibility and odorless extrusion. Our exhaustive catalog provides the choices you want to help you get the job done quickly and easily.

Colors

One of the most important factors of any print comes down to color. Hatchbox 3D colors are bold and vibrant. Mix and match bright primaries and nuanced hues with gloss, textured, sparkle, transparent, and even wood and marble-mimicking filaments.

Reliability

Trust all of your prints to Hatchbox! We strive to make 3D printing an enjoyable and error-free process for our customers. That’s why each filament is carefully formulated and thoroughly tested to save you time and effort every time you print.

• 【20% WOOD Fibers】--- SUNLU Upgrade Spool Wood Filament is mixture of 20% recycle wood with polymer,Gives wooden colored and texture. SUNLU 1kg Wood filament combines real wood fibers, meeting your demands for printing projects of functional parts with wooden texture.
• 【Dimensional Accuracy & Consistency】--- These Wood PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
• 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended Wood PLA Filament Extrusion/Nozzle Temperature 170-190℃, bed 0-80℃ .
• 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
• 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20"

User questions & answers

Question:	What is the glass transition temperature for spla? i am just wondering how it compares to abs and petg
Answer:	The temp recommended for this Pla from the company is 200-210c. I have yet to find the sweet spot for good adhesion to the glass, I have wasted more prints, than completed prints. Honestly, spend a little more and get better quality.
Question:	What is Padding. Because they are recommending 20% to 30% of padding
Answer:	Padding is the filling density. Set it between 20%-30% would make your print less brittle.
Question:	Is this PLA food-safe to use for cookie cutters and such
Answer:	The PLA is not certified as food safe. Regardless of the type of filament that is used, 3D printing that uses FDM technology generally is not safe for printing food safe parts. There are many reasons for this. One main factor is because bacteria can build up in the small gaps that is created in between the layers that are printed. Another reason is because typical stock nozzles are made out of brass, which contains lead
Question:	Can this be wood stained
Answer:	Yes it can be stained, must sand first.

Product features

SUNLU WOOD Filament 1.75mm

It Supports Diverse FDM 3D Printers in Market Very Well !

Recommended Printing Temperature: 338-374℉（170-190℃）

Recommended Printing Speed:30-60 mm/s;

Recommended Heat Bed: 0-160℉(0-80℃)

Product description

With SunTop PLA filament, 3D printing is no longer a trouble task. We manufacture the most consistent filament that is compatible with nearly all 3D printers. With more than 10 years of plastic extruding experience and quality control standards, all SunTop filament is manufactured to produce the highest quality 3D prints.

OTHER FEATURES

• Density: 1.24g/cc
• Melt Flow Index: 12g/10min.(190 degree, 2.16kg)
• Enclosure: Optional
• Odor: Little to No
• Flexibility: Brittle
• Heat Resistant: No
• Biodegradable: Yes
• Post-Processing: Cut, filed, sanded, painted(with acrylic), and glued
• Compatibility: Our PLA filament is compatible with nearly all 3D printers, including Ultimaker, MakerBot, Flashforge, XYZ printer, Lulzbot, Zortrax, etc.

PRIOR TO PRINTING

Build plate of your 3D printer needs to be level, clean and oil-free

OPERATING ENVIRONMENT

Store PLA filament in a dry and cool place because it can absorb moisture from air. We recommend keeping PLA filament vacuum sealed until you are ready to use it because long term exposure to humidity can compromise filament quality and performance.

• 【PLA  Filament】 PLA has advantage of no air bubble、no wraping etc. Ensure no clogging、every print with high qulity finish. Fit for complex structure 3D work with high toughness requirement and make sure no brittle during 3D printing jobs.
• 【High Accuracy 】30-40 times laser scan per second during production, ensure Dimensional Accuracy +/- 0.03 mm.
• 【Real Wood Fibers】Printed products are more textured . Material will have the look, feel and scent of a wood piece
• 【Eco-friendly Material】SUNTOP 1.75mm wood PLA filament is 100% biodegradable & non-toxic. Not harmful  to human  and environment.safe to use
• 【Recommend Temperature】Printed Temps 190-220°c.Platform Temp：0-60°c. Match all 1.75 mm-specification 3d printers in the market except chipped filament cartridge.

User questions & answers

Question:	Is there a recommended nozzle size for this filament? i.e. larger than 0.4mm to avoid clogging
Answer:	I used the stock 0.4mm Nozzle on the Prusa Mini and had no issues. I printed with Prusa PLA filament profiles, .15mm Quality at 15% infill. It worked like a champion.
Question:	Does this have wood fibers in it? Or is it just wood colored
Answer:	I’m not 100% certain on this, but when printed it has a very rough texture that I have only seen with wood fiber containing filament. So I think it does.

• 【Parameter】-iSANMATE Wood PLA+ Filament Print Temperature：190℃-225℃. iSANMATE PLA+ filament dimensional: 1.75mm,accuracy +/- 0.03mm, 1KG (2.2LBS).
• 【Wood PLA+】- iSANMATE Wood Filament is made up of 20% wood flour and 80% PLA+ with wood color and texture.Able to make products with woody touch
• 【High Quality, Environment Friendly】- iSANMATE Wood PLA + filament has superb layer bonding, and strength and toughness are greater than conventional PLA filament. Environmentally friendly and easy to use
• 【Spool Size】- Spool Diameter:197mm(7.76") ; Spool Width;64mm( 2.52") - Spool Hub Hole Diameter: 57mm(2.24").
• 【100% Satisfactory Service】-1 year warranty. Provide fast and efficient technical solutions when you have any printing problems. With 24 hours guaranteed reply.

User questions & answers

Question:	I bought the rainbow filament and loving it, however I'm wondering if there are any tips on sanding/polishing to remove burrs and keep it smooth
Answer:	I am no expert but in the couple of months since i started 3d printing i’ve Learned that sanding destroys the natural shine of the print at least with pla and if you do have to sand pla use the wet sand method as the friction will melt the pla and just make a mess. If you want to do a lot of sanding for finishing consider using abs as that can be sanded almost like wood with no problem. Now as far as the burs they sell bur knives on amazon that are the perfect shape for slicing the burrs off but in my own experience exactas aren’t thick enough and the bur knife is so specialized that it’s not very useful for anything else i’ve Had the best experience with a super cheap wood carving tool set from daiso they have very sharp strong steel blades with a wooden handle and they hav different shapes that i find very useful for cutting support i’ve Also heard it’s best to head the blades to help it melt thru rather than rip thru. Another tip would be to only allow support in the settings from the plate that way the support will come up from the plate to support but not grow out of the actual printed object avoiding the burrs and zits. As far as ensuring the longest survival in the greatest condition i would consider spray coating the print in a polyurethane spray maybe with a uv protectant and keep it dusted well. I hope that helps.
Question:	What are your optimal settings for the rainbow pla filament 1.75 mm? retraction, speed, temp, cooling, etc
Answer:	I have a glass plate covered in kapton/polyimide film that comes with my MakerGear M3. This seems to work well for most PLA. As for the rest I used the same settings I use for PLA. Temp: 215, Bed: 60, speed: 3500 mm/min, cooling after 1st layer, retraction: 2mm, nozzle: .35mm. These are all standard settings for my M3
Question:	What are the dimensions of the spool? Specifically, I'm interested in the spool's outside diameter, inside diameter，and Printing temperature
Answer:	Spool Diameter: 7.76"" Spool Width: 2.52"" Spool Hub Hole Diameter: 2.24 "" Inner Circle Diameter: 3.5"". Printing temperature: 190--220℃. Hot bed temperature: 0-45℃

Product features

iSANMATE Wood PLA+ 3D Printer Filament

iSANMATE Wood PLA+ Filament is made up of 20% wood flour and 80% PLA+ martial with wood color and texture. Able to make products with woody touch.

It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.

Feature

iSANMATE Wood PLA+ Filament is made up of 20% wood flour and 80% PLA+ martial with wood color and texture.

Package includes

1*1kg wood pla+ 3D printer filament

1*1 piece manual

1*1 bag desiccant

Laser measuring system

Advanced laser diameter measuring and self-adaptive control system in the manufacturing ensure these PLA filaments of 1.75 mm diameter.

FAQ

1, Does this filament has RoHS or CE compliant?

Yes, iSANMATE PLA+, PETG filament has ROHS and CE certificate.

2, Does this PLA filament work with Creality Ender 3 Pro 3D Printer or IEMAI 750?

Yes. Our engineers have tested more than 98% of printers using 1.75mm filament, they are applicable. And also can be used to 3D pen.

3, Why can't the filaments stick to the hotbed easy?

1). Check the temperature setting before printing, PLA filament temperature about 190-225℃;

2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;

3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

About iSANMATE

iSANMATE 3D Printer Filament was born out of the passion for technology and exploration of the future, while always placing customers at the heart of all development, and gives you the freedom to implement your projects and ideas by 3D printing.

iSANMATE offers PLA, PLA+, PETG, PVA, ABS, PC, PA, flexible TPU, PEEK, PPSU, PEI, and so on.

iSANMATE filament is a new member of Amazon, but over the years our printer filaments have been sent to users around the world and have been well received. Now we supply high-quality printer filament at Amazon directly to you. We are confident that you will enjoy the printing when using the 1.75mm Filament.

Tips:

1, Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.

2, Be sure to insert the free end of the PLA+ filament into the holes to avoid being tangled for next time use.

3, If there is no print plan within a few days, retract the filament to protect the printer nozzle.

• 🌲【SUNLU 20% WOOD Fibers】-- SUNLU Upgrade Spool Wood Filament is mixture of 20% recycle wood with polymer,Gives wooden colored and texture. SUNLU 1kg Wood filament combines real wood fibers,Extrusion temperature adjustments will show changes in printing color.
• 🌲【SUNLU WOOD Filament Clog-free & Bubble-Free】-- Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the Wood filament from moisture. Please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.
• 🌲【SUNLU 1kg WOOD 1.75mm Less- tangle and Easy to Use】-- Full mechanical winding and strict manual examination, which guarantee the WOOD filaments tidy and easy to be fed; Larger spool inner diameter design makes feeding smoother.
• 🌲【SUNLU WOOD 3D Filament Dimensional Accuracy & Consistency】-- SUNLU 3D filament guarantee these WOOD filaments of 1.75mm diameter, dimensional accuracy +/- 0.02mm; 1kg (2.2lbs)/spool.
• 🌲【SUNLU 100% SATISFACTION GUARANTEE】 We offer great 3D printer filament and best customer service, Customers enjoy SUNLU 90 days Money Back Guarantee.If SUNLU 3D Printer filament 1.75mm have any problem, please send email to us.

User questions & answers

Question:	What temperature should i print sunlu pla filament at
Answer:	Depending on what printer you are using as well as what type of hot end in that printer. This is strictly a trial and error setting. The temp range (200 to 230) is your starting point. I run mine at 205. There again you may find that suitable or you may want to run slightly hotter. My suggestion is make something small to test. Print it at 200. then print it again at 205 etc. Find the best results then lock that temp in your slicer program for future prints.
Question:	What temperature should i print sunlu 3d pla filament at
Answer:	It depends on your printer since the location of the thermocouple in the hot-end will give slightly different readings on different machines. On my MakerGear M2, I print all PLA filaments, including this one, at 215c with excellent results.
Question:	How should print settings be adjusted for sunlu pla+ filament compared to regular sunlu pla 1.75mm
Answer:	I had many issues with printing with this filament on my Ender-5. My heat towers were great up and down and so I initially selected a temp of 210C down to 200C and a bed temp of 45. I had ok adhesion but many prints would slip on the bed after a few hours printing or larger prints would lift from the bed. I eventually came across some users reporting that 228C hotend and 80C bed was working and so I gave it a try. Now I have this filament printing great and very few issues. Because of the increased bed temp it is important to reduce any drafts near the printer as rapid cooling can cause the print to warp and lift. I have experienced this once in the last 15-20 prints since I upped the bed temp compared to most other prints larger than 2x2 inches at 45C.
Question:	Is this pla plus 3d printer filament sunlu brand? what's the warranty teams
Answer:	Yes,it's SUNLU Offical Brand,all 3D Printer filament offer 1 years warranty.They have PLA+,PLA,ABS,TPU,PETG,WOOD,Carbon Fiber,Rainbow filament.

• ✔PLA FILAMENT BUNDLE - 225g Wood filament,contacts 20% real wood firbe,225g Marble PLA,225g Sparkles Gold,225g Bronze PLA Filament,
• ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm
• ✔SAFE FOR KID & ECO-FRIENDLY - AMOLEN PLA Filament made mainly from CORN starch and raw materials come from USA, which is 100% safe to children and degradable Eco-friendly
• ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage
• ✔HASSLE FREE - AMOLEN is focus of special and better quality PLA filament. We provide professional 3D printing technical guidance and perfect customer service. Defective filament can be reissued or refunded fully. Why not choose AMOLEN 3D Printer Filament？

User questions & answers

Question:	is it metal or just color
Answer:	Its Color and gloss look like metal.
Question:	Help? The copper and glow doesn’t stick to the bed or something. The filament moves around to the point I can’t even really start the first layer
Answer:	Check you temperatures, for the bed I used 50 and 210 for the filament. I print at .2mm and 20% infill. I have successfully printed with both.
Question:	What is the difference between "Real gold" and "Shining Gold
Answer:	thank you for your interest. the "REAL GOLD" has a natural metallic color and luster but it does not have shining flecks; the "SHINING GOLD" is slightly translucent and has properly sized flecks of ultra-bright gold glitter
Question:	is the color changing filament food safe
Answer:	I am not 100% sure, but what I have read, NO PLA filament (glow or not) is food, microwave/freezer or even outdoor safe (melts). It will have lead from the nozzle & other contaminants that would leak to food

Product description

Wood PLA is a special PLA filament:

1.It is easy to cause nozzle clog because of high temperature carbonization;

2.It is easy to cause nozzle clog if the temp too low to melting wood PLA;

3.Wood PLA is a special PLA filament which is easy to produce strings during the printing process;

4.Another feature of wood PLA is abrasive - like sand paper.



Some suggestion for Eryone wood PLA based on above information.

For reducing strings:

1. Choosing a lower printing temp in the right temp range at which we can print normally;

2. The right retraction can help us to reduce these strings.

3. Of course, some appropriate model files can also help us to avoid some strings.

4. A hardened nozzle is the better choice when you use wood PLA.



Note:

For original Prusa 3D printer users,

the recommended temp is:

200℃ for extruder,

65℃ for heat bed.



Technical specification:

Diameter: 1.75 mm

Tolerance: +/-0.03mm

Print Temperature: 190℃ - 220℃ (374℉ - 428℉)

Recommended print speed: 50-100 mm/s



Tips for use and storage:

1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.

2. In order to extend the life of your filament, please store it in a dry, sealed bag or box. Preferably, add a packet of Silica Gel to absorb any excess moisture.

3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.

• Wood 3D Printer Filament Vacuumed Sealed With Desiccant
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• Recommended Extrusion/Nozzle Temperature 190℃ - 220℃ (374℉ - 428℉)
• 15% WOOD Fibers, 1KG (2.2 lb) Spool
• Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"

• GLOW PLA FILAMENT - Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Green has the best luminous effect, then blue, deep blue purple, shiny green, red glow filament
• UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding
• HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm
• SAFE FOR KID & ECO-FRIENDLY - When not glow, it is white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN pla filament is 100% safe to children and degradable eco-friendly
• VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage

User questions & answers

Question:	I will need hardened steel nozzles for flow in the dark, correct
Answer:	You can use the traditional brass 0.4 nozzles, but any filaments with infused particles will wear the nozzle down over time. Hardened steel will not really wear down so it's commonly suggested, but not mandatory. There are cheap (10-12$) nozzle packs that have both 0.4 hardened steal and 0.6 brass nozzles that are both better alternatives to prevent wear down and clogging.
Question:	Do you have a version of glow in the dark filament that is orange color in sunlight
Answer:	No
Question:	Why wont my red glow in the dark filament glow? Like I get 0 glow from it. I kinda just looks like glass
Answer:	It does not glow on its own. It has to be "charged" by sitting under UV light (best results) or any other light source for a period of time.
Question:	Why does the search description say that this is tpu, but when you open the product page where i am typing this, it shows that it is pla
Answer:	Dear customer, Thank you for your question. The glow filament is PLA, not TPU. If you want TPU filament, please check the link below: https://www.amazon.com/dp/B074RGKBT4 We have yellow, red and white available on Amazon now. Have a nice day. Sincerely, Amolen tech

Product description

About Veeology

We have 6 years of experience in 3D filament production,the raw materials are imported from Europe.



As a mature 3d filament enterprise, have strict requirements on 3d filament and always continuous improvement.



In order to make a better filament, the quality is our strength.



Suggest Printing Temperature: 356°F - 374°F（185-190℃）



Suggest Heat Bed: Heat to 50℃-60℃



Package: Vacuumed Sealed Package;



Net Weight: 1kg/Spool, 2.2lbs/Spool



High Compatibility: To be applied to a variety of FDM 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc.



Tips:

Why Can't Print Wood Filaments as Easy as Normal PLA?



1). Check Temperature Setting Before Printing, Due to the addition of wood fill, the fluidity of WOOD PLA is weaker than ordinary PLA, so it needs a lower temperature, preferably between 185 and 190 ℃(365~374℉);

2). Check if 3D Printer Nozzle Has Been Used for a Long Time, It's Recommended to Replace a New Nozzle, which Diameter Recommended 0.4mm+;

3). If First Layer has Poor Adhesion, It's Recommended to Re-level Print Substrate to Reduce Distance Between Nozzle and Surface Plate;

4). After Each Time Use, Be sure to insert the free end of the PLA filament into the holes to avoid being tangled for next time use

• 【Real Wood Fibers】Printed products are more textured . Material will have the look, feel and scent of a wood piece. We are confident in Veeology products.If you are not satisfied or do not meet your expectations, support free return within 30 days.
• 【Premium 3D Printer PLA Filament】Full mechanical winding and strict manual examination, Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish.
• 【ACCURACY & CONSISTENCY】 - Duramic uses digital caliper system which measures the dimensions a thousand times and automatically adjusts them. This help ensures the 1.75mm diameter and the ±0.05mm tolerance are accurate and consistent. The color is also consistent without traces of other color.
• 【Printing Tips & Support】: Recommended extrusion/nozzle temperature 180°C - 190°C (356°F - 374°F), hot bed 50°C - 60°C (122℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers.
• 【VACUUM PACKAGING】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.

• ▷【 20% Wood Fiber Filled 】 : Enotepad 1.75mm PLA wood filament has 20% wood fiber instead of wood powder. This ensures a real wood structure and texture. Fulfilled the demand for wooden print models.
• ▷【Low-Temp Recommend Setting 】: Printing Temp:170-190℃(Best Temp 180℃). Heat Bed:60℃-70℃(OR Glue Required). Purity PLA filament raw materials and high precision diameter tolerance, 1.75mm +/-0.02mm. Strict control of uniform PLA filament diameter and selection of high-quality raw materials to avoid nozzle jamming caused by impurities and diameters.
• ▷【 Premium Quality 1.75MM Wood Filament 】 : Get smooth extrusion. Uniform winding of 3D printer filament free of getting tangle. PLA wood filament high toughness and strong layer adhesion leads to the first perfect printed layer.
• ▷【 PLA Recommend Seting】 PLA filament is obtained from plants. Non-toxic, no smell. Recommend printing temp:170-190℃(best temp 180℃), heat bed:60-70℃(or glue requested), printing speed:30-60MM/s.
• ▷ 【Vacuum packing with desiccant】: Enotepad 1.75mm 3D printer filament is carefully vacuum packed with desiccant to ensure low moisture content and to keep dust and foreign objects away.

User questions & answers

Question:	Will this work in my 3d printing pen
Answer:	Hello friend, our 3D PLA Filament is 1.75mm, which means your 3D printer or 3D pen is a Filament of this size, you can use it.
Question:	where is it made
Answer:	It made in China.
Question:	Will this work with a 3d pen? I have a tecboss sl
Answer:	Hello friend,thank you for your quetion.It works, but if the 3D pen stops working, remove the filament to prevent clogging.
Question:	Can you be more specific about the material added to the PLA
Answer:	Hello friend,This is all PLA, white base with flecks of black PLA to achieve marble effect.Thanks.

Product features

Recommend parameters

Printing Temp:170-190℃(Best Temp 180℃). Heat Bed:60℃-70℃(OR Glue Required).

Print speed: 30-60 MM / S / bubble: 100% zero bubble

Elongation at break: 4% / melt index: 8-13 g / 10 min (190 ℃, 2.16 kg)

Low shrinkage

Enotepad 1.75 mm PLA wood filament

Low shrinkage

Effective to reduce the torsion problem

Get a smooth print

Ingredient

PLA wood 1.75 mm is made of starch.

Non-toxic

No potentially dangerous substances

Tips for printing

1. To avoid winding, insert the free end into the holes on the edge of the filament spool.

2. To avoid clogging of the nozzles, remove the filament from the extruder if you will not be using the printer for a long time.

3. Store the filament in a cool, dry place. Protect from UV light.

Product description

Product Specification

Type: Filament Holder

Color: Black

Material: Metal and Plastic



Application

Widely used for most PLA, ABS, WOOD, TPU, NYLON, flexible filaments, Much firmly design, won't fall down with all kinds of filaments



Warranty

Every product passed before shipment. But if you have problem, we provide free return/exchange in 90 days, please contact us.

• 【Material】 Metal and Plastic, stable, durable.
• 【Easy Assembled】Easy installation and quick installation.
• 【Rotatable 3D Printer Filament Holder】3D Printer Filament Holder is Rotatable, do not entangle the filament. It is very convenient to use.
• 【Compatibility】Suit for Ender-3 series, CR-10 series, Artillery Sidewinder X1, fits in most 3d printers.
• 【Package Include】1pcs 3D Printer Filament Bracket, 2pcs M4 T-Nut, 2pcs M4x8mm screws.