12 best commercial 3d printers

• The X-Max with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• 5-inch full color touchscreen with intuitive icons makes for easy operation
• Build size: 300mm x 250mm x 300mm / 11.8" x 9.8" x 11.8"
• Full metal support more stable than plastic support;Aviation aluminum, CNC machining aluminum alloy
• QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free one-year warranty.

User questions & answers

Question:	Does it stop if the filament runs out and wait for user to load new filament
Answer:	The printer currently does not have such function. So if the filament runs out, there will be no prompts or stop printing. Please load new filament directly to print.
Question:	Can a Filament Detector be added by user to the Xmax
Answer:	Because the machine has automemory...on power outages, I built my own filament detector. It serves two purposes: 1) It will detect the end of a filament at the sensor (basically a mechanical switch), and trip a relay which shuts down the machine; and 2) It cuts the filament in the case of a reel bind which then does (1) above. (this is done by a bend that pulls into a blade when the force is enough). Yes, it's a kludge. But when you are 10, 15, 22+ hours into a print (often overnight) and are not baby sitting it, this method has been a plastic and time saver. I am sure there are better ways, but this was a quick and dirty project after I had a spool bind up. While I normally use higher quality manufacturers, binding can and does occur, especially if the last person to swap out a roll wasn't careful and let the end loop under a wind. Those of you who have printed enough, know exactly what I am talking about.
Question:	Does this printer have filters for fumes
Answer:	There is a foam filter element over the cabinet fans. This does little more than filter the air blown into the build chamber, and is really unnecessary, for all intents and purposes. Consider it a dust filter for the inside of the printer. It has no impact on any fumes or particulates in the air escaping the printer during use..
Question:	Can it automaticlly stop if the filament runs out like bibo 3d printer
Answer:	No, it cannot. However, there is a pause and resume function, so you can replace/change filament mid-print, you just have to detect the correct time (or predict it in gcode) when the filament will be close to running out.

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces Imported 12mm axis.

Maximum print size is 11.8''x9.8''x11.8''(300(L)x250(W)x300(H)mm)

Newly Developed Extruder:

Two Sets of Qidi Tech Third Generation Extruder Assembly with Different Capability.

A extruder : For printing general material such as PLA, ABS, TPU ( already installed on the printer).

B extruder : For printing advanced material such as Nylon, Carbo Fiber, PC.

Two Different Ways for Place the Filament:

The first creation of the two different ways for place the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

5.0 inch Touchscreen:

5.0 inch touchscreen. Larger and user friendly interface makes it more intuitive and easy to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

Qidi Print Slicer:

The Qidi Tech latest generation slicer software version 5.0 : Redesigned UI interface of Qidi Print software is more convenient to operate. It has been changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The Qidi Print software compatible with all types of Qidi Tech 3d printers, life-time free, the alternative to paid software ( If you have the old version, please download the latest version on Qidi TechI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Max 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

• Patented nozzle structure – Has been upgraded several times and the wire is more even and smooth, which all improve the surface quality of model
• Heating Bed – Fast and stable heating, good molding effect, never deformed,high temperature resistance, abrasion resistance, fast installation super long service life
• Real time temperature monit – Automatically turn on the cooling fan,When the cavity temperature exceeds 50℃.Speed up the air ciculation inside the cavity
• Out of the box – Dreamer NX is suitable for industrial design,tool design,architecture designer,mechanical designer etc
• What you get – Flashforge 3d printer Dreamer NX,12 months warranty, lifetime technical assistance and 24 hours professional customer service

User questions & answers

Question:	Does this come fully assembled
Answer:	It comes 90% assembled, as during the transport the extruded assembly had to be protected. But it is a very easy process as it only requires 3-4 screws to assemble.
Question:	Does this printer meet qualifications of enablingthefuture for prosthetics
Answer:	I believe that it is possible as it allows the user to create anything beyond their imagination. It is a very high-quality printer so it should easily surpass any prosthetic qualification.
Question:	Can this use 1kg spools
Answer:	Yes,but the 1kg spools do not fit in dreamer nx,you can use a separate filament spool holder or buy 0.5kg spools.
Question:	What G-Code does this printer use
Answer:	The G-code is customized by flash forge so a normal G-code editor dose not work if it does not have the flash forge extensions

Product features

Constant Temperature Circulation System

Real-time temperature moni:Automatically turn on the cooling fan,When the cavity temperature exceeds 50℃.Speed up the air ciculation inside the cavity.

Heating Bed

Fast and stable heating, super long service life. Precision can be seen!

Level and flat surtace, Heat evenly, good molding effect, never deformed.

Flashforg's independent R&D printing,High temperature resistance, abrasion resistance, fast installation.

Patent Extruder

Inner turbo fan,form a circular air supply around the extruder,greatly improving the molding effect and also greatly lower risks of extruder jams.

The patented nozzle structure has been upgraded several times and the wire is more even and smooth, which all improve the surface quality of model.

Self-developed Slicing Software-Flashprint

FtashPrint offers beginners a basic mode and offers professionals an expert mode, which allows all users to enjoy the software with greater printing fLexibiLity.

File Edit Function: Convert 2D to 3D, cut Large-size model files, one-button control for seal / canister / lamp.

Compatbility of Various Filament

The 3d printer is suitable for various 3d printers filament,PLA,ABS,PETG, TPU,Copper,Wood.

New Added Password Lock

Private protection will be safe.

Multiple Printing Methods

Connectivity:Usb cable,SD card, Wifi.

High Precision

The 3d printer is suitable for industrial design,tool design,architecture designer,mechanical designer etc.

INSIDE PACKAGE

Specification parameters

Product description

Specifications :



Printing size:350*250*300mm (13.78x9.8x11.8in )

Layer resolution:0.05-0.3mm

Offline printing:SD card

LCD screen:Yes

Nozzle diameter:0.4mm

Hot bed material:Aluminum substrate

Printing filament:PLA,ABS,TPU.PA,WOOD

Filament diameter:1.75mm

Software Language:Multi-Langauge

Working format:STL,G-Code

Device dimension:590*450*568mm

Device weight:35KG(70.6lb)

Packing demension:720*550*800mm

(28.35*21.65*31.50in)

Packing weight:50KG(110lb)

Voltage:AC110~230V

Operating system:Windows,Lunis,Mac

Control software:Cura,Repetier-Host





Package Contains:



● Machine A-8

● 1roll x 1KG filament

● 1roll x Blue masking tape

● 1x Spool Holders

● Nuts, screws and Hex Wrench Kit and testing filament

● Power Supply Cable

● USB cable

● 1×8GB SD card and Reader

(contains software, test sample files and operation manual)

• Reliable Material : Commercial grade 3d printer industrial linear guildway precise ball screw rods.metal structure with cover
• Large building size :13.78x9.8x11.8in ,lots of printing material ABS PLA TPU WOOD filament 1.75mm
• Clean and neat structure :Fully closed metal structure with creative and friendly metal extruder cover ,precise CNC components
• Easy Filament Feeding :Dual feeding motor,filament feeding auto and easily
• HBG glass heating bed tigh adhesion easy to take off when cooling down

User questions & answers

Question:	Hi, how are you? what cost does the material have to make the products? another query, if i wanted to make door keys, are they sturdy? thank you
Answer:	Hello Alan, it cost only USD20-30 for 1kg filament. and you can print almost 1kg model which depends on your models. but it only works with plastic filament but not metal. so, you can make a plastic door keys model but not metal key. thanks !
Question:	Is this printer supported by Simplify3D
Answer:	yes,it works with simplify3d
Question:	If i export a autocad 2016 file as .stl into your host program (cura, repetier-host), will that work to print 3-d
Answer:	Yes,it works ! 1st,drawing 3d by CAD and save it as STL format.2nd, loading this STL file to (Cura . repetier-host) .that is all. there is user manual in my listing for your reference
Question:	Does this come with any filament at all? Small test spool
Answer:	yes, it will come with 1KG PLA and 1 roll of masking tape

Product features

JGAURORA 3D Printer A8

Fully Closed Metal Structure

Indsutrial linear guideway

Industrial linear guideway to create high accuracy positioning and extreme smooth printing effect.

Ball screw rod

Ball screw rod to create high accuracy positioning and long service life

Dual feeding motor system

Dual filament feeding motor system to ensure stable and evenly feeding, and long time printing.

Patented Bullet type nozzle

Patented bullet type nozzle was developed by JGAURORA R&D team as per years experience.it is heating uniformity, no clog

Details design makes high accuracy and safety

Precise CNC components, creative metal extruder cover to avoid scald.

Two fans in the machine frame keeps constant temp.

Changing color PLA

Print size :190*55*270mm

Layer thickness: 0.1mm

Print speed :50mm/s

High standard of quality control

Quality management system certificate ISO9001:2015 , Certificate No.: 00117Q35307R0M/4403 Iusse date : July 4 2017 .Strict requirements and high standards is our mission.

• Dual feeding system ensures smooth feeding,Fully closed metal structure and easy-open lid makes printing more visible and stable
• Filament RUN-OUT detection: The machine beeps when your filament runs out to allow you to change the filament and avoid a failed print
• Power Fuilaur Detection: Resume printing from where the last print was stopped due to power failure. Saving you valuable time and filament
• Ball screw rod and industrial linear guideway to create high accuracy positioning and extreme smooth printing effect.
• Color touch screen gives an easier experience navigating the printer's menus. The machine will be shipped from China

User questions & answers

Question:	What is the nozzle material
Answer:	It is copper.it depends on how much temperature your filament request. our machine nozzle temp.up to 285'C
Question:	Will this printer work with a Mac computer
Answer:	yes,it works
Question:	Does it accept any brand spools of abs, pla. does it do nylon
Answer:	yes,it acceptsany brands

Product features

JG MAKER Large Build Volume 3d Printer fully closed metal structure 350x250x300mm

1> Fully closed metal integral fixed frame to keep constant temperature during printing.

2> Dual filament feeding motor system to ensure stable and evenly feeding, and long time printing.

3> Ball screw rod and industrial linear guideway to create high accuracy positioning and extreme smooth printing effect.

4> HBG glass heating platform which makes it easy to take away model after cooling down.

5> Precise CNC components, creative metal extruder cover to avoid scald.

6> Self- developed high configuration main board with Malin firmware and effective heatsink.

7> RESUME PRINTING: printer has filament sensor and power failure detection, when the filament used up or there is a sudden power failure, it can resume printing.

8> Power Fuilaur Detection: Resume printing from where the last print was stopped due to power failure. Saving you valuable time and filament

9> Suitable for large size and complicated printing samples.

Industrial grade Large 3d Printer

Industrial grade linear guideway ,Smooth movement, low vibration,ensure higher accuracy industrial grape 3d printer

High accuracy ball screw rod ，Effectively ensure the stability of the platform movement

Dual filament feeding motor system to ensure stable and evenly feeding, and long time printing.

HD Large color touch screen

HD color touch screen ,Let's enjoy much convenient and easy operation

Optical switch

Optical switch makes High positioning accuracy and stable printing.

Resume printing and filament Run-out detection

A8S 3d printer has filament sensor and power failure detection, when the filament used up or there is a sudden power failure, it can resume printing.

You will receive

-1 X JG MAKER A8S

-1 X 1KG PLA

-1 X masking tape

-1 X toll box(including screws, user manual in PDF ,software .U Disk)

Specifications

• Layer thickness : 0.05-0.3mm
• Filament Diameter：1.75mm
• Build volume：350*250*300mm
• Accuracy：0.1mm
• Print speed：10-150mm/s
• Nozzle diameter：0.4mm
• Nozzle temp.：180~250’C
• Hotbed temp.：room temp.~110’C
• Machine size: 620*450*600mm
• Packing weight:40kg
• Power:450W
• Leveling: manual
• Operate：Color touch screen
• Screen language：English/Chinese
• Filament：PLA/ABS/TPU/WOOD etc.

Product description

The Creality CR-10 5S was designed by Creality 3D with one thing in mind; to provide 3D printing enthusiast with a large build volume for manufacturing both domestic and commercial items. The CR-10 S5 comes in a DIY kit and the necessary tools for assembling it. The assembling process should take approximately 20 minutes to complete. This is definitely an industrial grade 3D printing device which also provides support for a majority of slicing software applications making it a great device for developers interested in additive manufacturing.

WHY CHOOSE CR10 S5

1.Large print size: 500*500*500mm

2. Mainboard with filament monitor function, this function can detect when the filament is running out or not.

3.Ability to resume prints even after a power outage or lapse occurs.

4. High precision imported Aluminum V-slot Bearing + precision roller with high positioning accuracy, move smoothly, print faster

5.Patent Technology for XYZ Aluminum V-slot Bearing to make it run smoothly and get a higher quality product.

6. Industrial-grade PCB can continuously print for 200 hours without pressure but with matures printing technology and stable performance

7. Patent MK10 nozzle extrusion structure can print almost all printing material on the market without plug

Product Parameters

Printing Size: 500*500*500mm

Printing accuracy：±0.1mm

Nozzle Diameter：Standard 0.4mm(can be changed to 0.3 or 0.2mm)

Printing Speed：Normal: 80mm/s, Max.: 200mm/s

Materials：1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient Color etc.

Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.

Format: STL, OBJ, G-Code, JPG

Printing Method: SD card(off-line) contact to the PC(on-line)

Body Structure: Imported V-Slot Aluminum Bearings.

Operating System: Linux, Windows, OSX

Product size: 690*800*715 mm

Package Size: 84

• [Large printing size] The printing size is up to 500*500*500mm(19.68" x 19.68" x 19.68"), you can create a big product you want with this Creality CR-10 S5 3d printer.
• [Top quality] Creality CR-10 S5 3d printer is high-quality, it is the 3d printing industrial evangelist.
• [Filament detector] This design will reduce accidents and avoid model prints interrupts.
• [Double motor screw] Double motor screw steady and smooth, CR-10 S5 is confident to bring higher 3d print accuracy. Only four main components make assembly easy within 20 minutes
• [What you get] Package List: 1 x 3D Printer Set, 1 x User Manual. Any troubles or defectiveness please contact us, we offer a 12-month warranty unconditionally and free lifetime support.

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.

User questions & answers

Question:	I am looking to purchase a 3D printer as a gift for a beginner. Does anyone have any recommendations? Thank you
Answer:	My son is 15 and he handpicked this one as a gift. He doesn’t know that I’ve purchased it, but he was very adamant that this was the best one. If the recipient is very technically inclined, I think it would be a great fit. I’ve read tons of reviews and watched several on YouTube. Once it’s properly assembled ( does seem to take some time), then operation is suitable for a beginner (again, must be very technically inclined). My son did request a different type of filament that I also purchased on Amazon, because the included roll isn’t that great. I don’t remember which one I purchased, but it was about 20.00. He also suggested getting or building a table to sit it on, as you should not sit it directly on the floor. He’s making one to put beside his desk, but I’m sure any small table would do. I’m very excited myself to see it in action, but I guess I’ll have to wait until Christmas.
Question:	Does the creality ender 3 has the dual extruders like the bibo 3d printer
Answer:	No, but. You could upgrade it if you have the expertise
Question:	Hi. Purchasing for my young granddaughter. will I need to purchase anything else with the unit in order to use it christmas day
Answer:	You also need the filament sold on spools. It comes in many colors. The filament is the actual product that is used to make the 3D creation.
Question:	Seriously how difficult is the build
Answer:	It is very straightforward, but the downloadable PDF instructions leave a lot to be desired. I highly recommend using the top-rated "how to build" video, along with the PDF. Here is a link to that video: https://www.youtube.com/watch?v=me8Qrwh907Q The video contains a huge number of hints which, having now completed my first 3D print, which was 100% successful, I can now fully appreciate. The video helps you get everything square, and makes sure that many minor adjustments which were not done perfectly at the factory, are tweaked just right.

Product features

Fully Open Source

Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

Branded power supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Resume Printing Function

Ender 3 can resume printing after power outage or any other unexpected stoppage.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

High Precision Printing

Allow you to print high precision models, creat your own world.

Suitable gift for kids

This semi-assembled kit 3D printer is a perfect gift for kids, allow them to learn about the basic construction of 3D printers.

Ideal for STEM Projects

Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Product description

The Dremel DigiLab 3D20 Idea Builder 3D Printer is Dremel's most reliable low-cost 3D printer for hobbyists, tinkerers and other users new to 3D printing. The simple design of the printer along with Dremel support team will help you succeed at 3D printing, even without prior experience! The printer comes fully assembled and includes a 0.5 kg spool of Dremel filament. The easy to follow quick-start guide and detailed instructions will help you begin printing right out of the box. Immediately, you will notice the attention to safety with the rigid, fully-enclosed design and 3rd party UL approval. The printer is designed to print with PLA filament onto a non-heated build plate that uses black build tape to help your prints adhere to the build plate. You can begin your printing with the high-quality models pre-loaded on the printer, which can be accessed through the 4” full-color touch screen. You can load your own files from sites such as Thingiverse, with the included Dremel 3D slicer software. An upcoming update will allow the 3D20 to use .gcode files so you can use Dremel Digilab 3D Slicer, Cura, Craftware, KISSlicer, Simplify3D, Slic3r, Repetier, and other programs to load your print files. Once you start slicing your own files you can take full advantage of the 9” x 5.9” x 5.5” build plate and 100 micron high resolution. The simple design of the extruder allows for easy maintenance with continued use of the printer. With 85 years of reliable quality, Dremel is an established brand that you can trust to support you throughout your journey. By purchasing a Dremel 3D printer, you will have access to Dremel video tutorials as well as unrivaled Dremel customer service. All the help you need will be just a quick email, live chat or phone call away. This is Dremel's most affordable 3D printer and is perfect for new users or for students. Electrical Input Rating - 120 V, 60 Hz, 1.2 amp.

• Countless hours of high quality printing with the most reliable low-cost 3D printer
• Quickly and easily make your 1st print out of the box with completely pre-assembled printer, included 0.5 kilogram spool of filament and clear setup instructions. Maximum build depth (inches): 9
• Far superior safety compared to competition with fully enclosed design, non-heated build plate, PLA-only printing and 3rd party UL safety approval
• Compatibility with brand new Dremel Digilab 3D Slicer based on cura, the industry leading open source 3D printing software and gcode files so you can use your favorite slicer
• Accompanied by unparalleled local Dremel customer service support and industry’s best 1-year warranty. Extruder temperature: Up to 230°C /397°F

User questions & answers

Question:	Will this work with .obj files
Answer:	Yes. The Dremel 3D software is compatible with both .OBJ and .STL files.
Question:	Does it use a Proprietary filament or can it use any standard 1.75 PLA purchased from Amazon
Answer:	According to Dremel -> The Dremel 3D Idea Builder was designed and optimized for use Dremel PLA filament. Other filament may cause damage to the machine and will void the warranty.That being said because the filament by Dremel was not available at the time I did my review and I ran out of the original dremel filament I did buy replacement filament by 3D Solutech (1.75 PLA 2.2lbs spool) and will confirm it works. The spool does not "lock" into the printer, however it does fit in the spool grooves and still rotates and feeds into the print head with no issues. Just know that going non-dremel brand you may lose your warranty. You could if you wanted to wind filmant onto the dremel spool and get it to "sit/lock" correctly if you are concerned about it. For me it works perfect without locking it in and placing it in the spool groove at the bottom of the printer.
Question:	what can't the 3d printer make
Answer:	Puppies. Unless you are talking about small plastic puppies. Then it can do that. Real puppies though, not at all
Question:	Is it possible to print a copy of this Dremel 3d printer so I could then reurn the original printer to Amazon and just use the printed printer
Answer:	Yes, but dont stop there... you can create copies with the copies. After only a few generations you will have thousands of printers and can retire rich!

Product features

Best-in-Class Reliability

The Dremel 3D20 is the most reliable consumer-grade 3D printer on the market. Every Dremel 3D20 has been rigorously tested to ensure reliable printing time and time again. Furthermore, Dremel filaments are specifically engineered to optimize printing.

Get Started Immediately

It’s quick and easy to begin 3D printing. Our open system gives you the ability to download and print free models from around the web. You can also create your own designs by using any CAD software to bring your imagination to life.

Trusted By Makers

Makers have trusted Dremel since 1932 because of the quality and versatility of our products. We have been there for you over the years, and we will continue to be there with you in the future. Make More!

Full-Color LCD Touch Screen

Interact directly with the 3D20 through its full-color LCD touch screen. The interface allows you to modify settings, lookup files in the SD card, and print in a smooth fashion.

Fully Enclosed

The 3D20 is fully enclosed to maximize the printing success rate by creating a stable temperature inside. This also protects children from sticking their hands into the work area during prints.

PLA Filament

Dremel’s non-toxic, recyclable, plant-based PLA filament is safe to use at home and around children. It has been engineered for optimal printing, producing a stable, strong object with a high-quality finish.

Industry's 1-Year Warranty

If something goes wrong with your 3D20 3D printer, rest assured that we will have your 3D printer fixed in no time at no cost to you. Know more in our official website.

More Than Just A 3D Printer

In a world full of 3D printing startups, Dremel provides you with an entire ecosystem of benefits that goes beyond the 3D printer hardware. In addition to our reliable 3D printer, you will get our:

• The X-PLUS with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• The X-PLUS 3D Printer Kit comes with two different types of extruder assembly. The extruder A had already been installed on the printer. The max printing temperature is 250C, and it can works well with PLA, ABS, TPU. And for extruder B, free to you if you need. The maximum printing temperature is 300C, and can print Nylon, Carbon Fiber, PC. (The latest development, free trial).
• Double Z-axis driver, ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.
• Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24 hours. Free One-year warranty is also guaranteed.

User questions & answers

Question:	Is the qidi 3d yellow banner removable? i understand branding, but it's a bit of an eyesore
Answer:	You can take it off but it will leave the glue on and it is a long process to remove.
Question:	Is the only difference between x-plus and max the bed size? i noticed the max doesn't list carbon printing - is that feature not available there
Answer:	The main differences between the X-Max and X-Plus are the build volumes (Max= 300x250x300mm vs Plus= 270x200x200mm) and the touch screen (Max=5" vs Plus= 4.3"). They both can print the same materials, including Carbon Fiber, Polycarbonate, PC/ABS, & Nylon using the Hi-Temp print head that has a hardened steel nozzle to prevent wear when using abrasive filaments. Hope that helps.
Question:	Is this a dual extruder printer like bibo 3d printer
Answer:	No, it is a single extruder. The additional extruder they include or send at customer request is an upgraded single extruder module.
Question:	How does this printer compare with the prusa i3 mk3? they are at the same price point but i would have to wait several weeks for the prusa
Answer:	The guy that sits next to me at work got the same Prusa kit. He feels like the QIDI X-Plus may out perform his. Also, my build capacity is a bit larger than his. He likes the PEI surface on the Prusa. My only mild complaint is having to exchange extruders for the over 250C range, but I think I get smoother prints with my low temp extruder that he does with the general purpose extruder on the Prusa. Also, he regrets not having an enclosure like mine has. We compare prints all day long, so after he spent an entire day and night building his & I was up and running in 10 minutes, I want to buy another one! I also got mine in 2 days & I have almost immediate answers from support 24/7, no matter how trivial. They are amazing! It took a couple of weeks to get the Prusa. He was so jealous!

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces imported 10MM axis.

Maximum print size is 10.6''x7.9''x7.9''(270(L) X 200(W) X 200(H)mm)

Newly Developed Extruder:

Two Sets of QIDI Third Generation Extruder Assembly with Different Capability

Extruder A : For printing general material such as PLA, ABS, TPU (Already installed on the printer).

Extruder B : For printing advanced material such as Nylon, Carbo Fiber, PC

Two Different Ways for Placing the Filament:

The pioneered creation of the two different ways for placing the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It is compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

4.3 inch Touchscreen:

4.3- inch touch screen with large and use friendly interface. During whole process, you're well instructed on the touchscreen display, make it more intuitive, and more precise and easier to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

QIDI Print Slicer:

Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Plus 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

Product description

Snapmaker 2.0 Modular 3-in-1 3D Printer

3D Printer

Snapmaker 2.0 modular 3-in-1 3D printers are ideal for beginners who are just getting started, hobbyists who prefer more customized options, as well as engineers and designers who want to print large objects or accurate parts with outstanding print quality.

Laser Engraving

Traditional 3D printers can only 3D print. Your Snapmaker 2.0 is completely different. With interchangeable modules, Snapmaker's functionality can be changed quickly, just like changing lenses on a camera. Now you can make many kinds of beautiful and artistic creations using laser engraving and cutting.

CNC Carving

You can even use Snapmaker 2.0 as a CNC router to create precision objects. It has faster working speed and a much larger workspace than the original model. It is the perfect machine to extend your interest to CNC carving.

You will receive the Snapmaker 2.0 including everything you need to start your maker journey:

• Linear Modules

• 3D Printing Module

• Laser Cutting Module (1600mW, Built-in Camera)

• CNC Carving Module (ER11 Collet)

• Controller (Cortex-M4 Processor)

• 5" Smart Touchscreen (Android OS, Quad Core A7 CPU @ 1.1GHz)

• Magnetic Heated Bed with Removable Print Sheet

• Aluminum Grid Table

• Wasteboard & Clamp Set

• Snapmaker 3-in-1 Software

• PLA Filament (1kg Spool)

One-year warranty included.

• Innovation 3-in-1: Snapmaker 2.0, the modular 3-in-1 3D printer that unlocks your full creative potential, from 3D printing to laser engraving, cutting, and CNC carving. Snapmaker 2.0 is smarter, faster, larger, and more powerful than ever before. It is a new generation of 3-in-1 3D printer that comes with everything you need!
• Large Workspace: Snapmaker 2.0 has three models: A150, A250 and A350. You can make large prototypes, or multiple smaller objects in one go. A150: 160 x 160 x 145 mm, A250: 230 x 250 x 235 mm, A350 provides the largest build volume, measuring 320 x 350 x 330 mm.
• Modular Design: Imagine a 3D printer that you can upgrade and customize. Snapmaker is more than just a series of machines. It's a system of powerful modules and add-ons for creative people like you. You can enjoy a lot of new features simply by getting the new modules or new kits.
• High Resolution: Built with high-precision parts and an overall upgraded design, Snapmaker 2.0 is able to consistently print, engrave, cut, and carve objects in high resolution. The repeatability of the machine is 0.005 mm, and the homing repeatability is 0.01mm.
• 3-in-1 Software: Our 3-in-1 software, Snapmaker Luban, is tailor-made for your Snapmaker machines. One single and powerful software for all your tasks. With a plugin system, API and tutorials, Snapmaker Luban enables you to easily add new features for existing modules. You can even develop new features for your customized modules. We will build a truly modular system together.

User questions & answers

Question:	Can this cut thin, soft metals? Perhaps 1mm-2mm thick
Answer:	No. Neither the laser nor the CNC can engrave or cut metal. The Snapmaker 2.0 includes a 1.6W laser module. You can engrave on dozens of materials like plywood, leather, fabric, acrylic, bamboo, MDF, hardwood, cardboard, paper, and even food like cookies! For laser cutting, you can cut through cardboard, plywood, acrylic and other materials with similar properties.
Question:	how is this shipped
Answer:	This is Fulfilled by Amazon, it takes 2 Days for Amazon Prime.
Question:	Will it print Polyamide ( PA ) material if so which filament
Answer:	Snapmaker 2.0's 3D printing module supports materials like 1.75mm PLA, ABS, wood-filled PLA, and TPU, etc. It doesn't support Nylon.
Question:	Can you make PCB's with this
Answer:	No, it can't.

Product description

Competitive and saleable the Pro2 3D printer improves upon it’s award winning predecessor and provides the next generation of performance

• Dual Extruder Electronic driven lifting 4× increased torque performance Diverse Filament Compatibility (300℃)
• Huge Build Volume (12*12*11 8 in) Minimum 0 01mm Layer Height
• Filament Sensor / Camera / HEPA Filter
• 7" Touch Screen Resume Print after Power Outage Wireless Compatibility
• 32 Bit Motion Control Board
• With 1-Year Limited
• Extended Available, please contact Raise3D at 888 963 9028

User questions & answers

Question:	What comes packaged with this printer? I don't see a package contents anywhere in the listing
Answer:	Hi, dear wanda001 , PCL is a low melting temperature refill, it's much safer for user, it's compatible with most 3D Pens/3D Printers on market, Not suitable for 3Doodler pen, thanks.
Question:	Does this have all metal hotends
Answer:	Hi yes, Please pay attention to the size of the hole of the printing pen with the appropriate diameter for 1.75mm PLA filament.
Question:	Is the single extruder version available
Answer:	Thank you for your inquiry. The material is PCL and suits hypothermia.
Question:	is ideamaker included
Answer:	No. MeDoozy PCL filaments DO NOT FIT for 3Doodler pen.

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

Product description

Dremel 3D45 EDU 3D Printer and Education Accessories (Lesson Plans, Professional Development Course, build plate, glue, filament). There is nothing worse than a clogged 3D printer. Based on Dremel's clog resistant extruder with active filament monitoring, the 3D45 EDU is engineered to run smoothly.

• Includes the Dremel 3D45 printer, granted the PCMag 2018 Editors' Choice Award. Equipped with a heated build plate, all-metal hot end, 4.5 inch color screen, wifi connectivity, and much more, the 3D45 is perfect for the classroom.
• Start using the 3D45 right out of the box with 30 lesson plans included and ready to implement in your classroom.
• Teach students to solve open-ended problems by creating their own models and prototypes in Nylon, ECO ABS, PETG, PLA and more at up to 50 micron resolution.
• Introduce your students to the world of digital fabrication allowing them to visualize lessons and realize their own potential to create.
• Receive 4 hours of professional development credits after completing 3D printing course designed especially for teachers.File Types Supported: STL, OBJ

User questions & answers

Question:	Does this product require Dremel filaments
Answer:	Thank you for your question. The only filament that has been tested with this unit is Dremel branded filament. Any pre-programmed temperature settings are specific to Dremel branded filament. For any additional questions, please do not hesitate to reach out to us directly by calling 1-844-437-6533, Monday through Friday (with the exclusion of most holidays) from 8am to 5pm CST.
Question:	Is this Polar Cloud enabled
Answer:	Yes, the Dremel 3d45 Edu 3D Printer is Polar enabled. Let me know if additional assistance is needed. Make it a great day! Adrian Malone Dremel Digital Customer Service 844-437-6533
Question:	Will using a non-dremel filament void the warranty
Answer:	Thank you for your question. Using third party filament will not void the warranty for a 3D45 printer if it is one of the filament types the printer is able to accept. Please be sure if using third party filament, to always manually enter the manufacturer's recommended temperature settings. The preloaded filament profiles pertain to Dremel filament only. For further questions, please do not hesitate to contact us directly Monday through Friday from 8am to 5pm CST by calling 1-844-437-6533.
Question:	Build volume dimension 6.7" is height or the depth of the build plate
Answer:	Thank you for your question. The 3D45 printer is Maximum Build Volume: 10” Width x 6” Depth x 6.7” Height.

Product features

The Award Winning Dremel DigiLab 3D45 3D Printer

This flagship printer is Dremel’s 3rd generation and is engineered for anyone from a first-time user to advanced professional to operate. Backed by Dremel’s lifetime support, the 3D45 is incredibly reliable and built for heavy usage. With easy-to-use features, a quick start guide, and everything you need in the box, you can go from unboxing to printing in minutes.

Reliable Printing starts with the Extruder

Designed for high quality and reliability, this is the engine that powers the 3D45 forward. The direct drive, all-metal extruder is clog resistant and delivers smooth 3D prints. This high-powered extruder heats up to 280°C for flexibility in different print materials. The Filament Run-out detection resumes printing where you left off when filament runs out. The Built-in automatic Leveling Sensor adds precision leveling for even more reliable printing.

Online Self-Paced Training with 4 PD Credit Hours*

Learn how to design and print with access to our PD course.

(*limited one certificate per bundle)

30 Lesson Plans included to get started right away

20 Lessons with a focus on design thinking.

10 Lessons with no need for 3D design software skills.

Extra Supplies and Filament included

Get more of the consumable materials you will need to keep your students printing and learning.