13 best 3d printer heads

• Package include: totally 22 pcs MK8 nozzles in 7 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm
• Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6
• Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer
• Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install
• Attention: small accessories, please keep away from children

User questions & answers

Question:	Will these work with an Anycubic i3 Mega
Answer:	I would recommend to the glass. Heat plate has the possibility to warp after time.
Question:	Will this nozzle head work on a flash forge finder 3d printer? i am looking for a larger nozzle tip such as .6mm instead of the standard .4mm
Answer:	I’ve been using this for PLA prints for a few months now. Still on my first sheet. About 100 prints. I wipe it with alcohol before EVERY print. So far only 2 fails due to poor adhesion. Turned out to be filament issues. About to change to 2nd sheet just because I’ve nicked it a few times with my putty knife knocking parts off.
Question:	The top part of the page says "copper", the detail says at least twice "brass". Which is it
Answer:	what was the material you applied to the bed before starting your 3D print? If using PLA or ABS/PVC you should only use hair spray or my favorite, glue stick - both are water soluble. You can try, in this order, paint thinner, lacquer thinner, acetone. Be very careful with the acetone as it is highly reactive and can melt your build surface if it is plastic or ? and not aluminum.
Question:	Will these fit in a Duplicator i3 clone
Answer:	0.67mm. that's building plate + adhesive

• Package Include: Total 44pcs MK8 3D printer nozzles, 0.2mm4pcs, 0.3mm4pcs, 0.4mm20pcs, 0.5mm4pcs, 0.6mm4pcs, 0.8mm4pcs, 1.0mm4pcs.
• Input Diameter: 1.75mm
• Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
• Out Thread: M6
• Material: Brass

User questions & answers

Question:	Which carrier do they use for shipments
Answer:	Yes. The power supply has a 110v/220V DIP switch
Question:	Will this work with the makerbot replicator 2x
Answer:	This printer comes with silent motherboard,it can operate under 50 DB,is very quiet.
Question:	Will this fit tevo tornado
Answer:	Some of the units are equipped with after market modifications. You need to contact the seller to confirm description. YouTube is a good source of information about stock and modified units.
Question:	Will it fit creality cr-10 s
Answer:	Not stock. There are many videos on how to upgrade the firmware so that it can accept an add-on leveling probe.

Product features

44 Pieces MK8 3D Printer Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Creality CR-10

Product description

Packing listing: 1x hotend

• Hotend for Anycubic i3 mega
• 0.4mm nozzle for 1.75 filament
• 12V 40W heater
• V5 Radiator tube
• V6 PC4-01 quick connector

User questions & answers

Question:	What type of wire connectors does this have? I'd like to install the proper male end for quick disconnect
Answer:	Specification of thermistor and heater bar for print head: Thermistor: 100K- line length 80mm-ph2.0-2p Heating rod: 12V40W- 80mm-ph2.54-2p terminal
Question:	Does anyone know if this will work on the Anycubic Kossel Plus
Answer:	Yes
Question:	This looks like it doesn’t have the threaded part on the end of the tube to screw into where the filament comes through the Bowden extruder
Answer:	It does not you just have to remove the existing tubing from the connector and insert the new one that is attached to the new hot end.
Question:	Can i use this hotend in an anycubic kossel delta printer
Answer:	Sorry ,it is only compatible with Anycubic i3 Mega 3D printer ^ ^

Product description

10 pcs E3D Printer Nozzle 3D Extruder Brass Head



Specification:



Color: Gold

Material: Brass

Output Diameter: 0.4 mm

Input Diameter: 2.00 mm

Screw Thread: M6

Hexagon Diameter: 8 mm

Quantity: 10 pcs

Compatibility: Monoprice select mini, E3D V5-V6, Prusa i3, Anet8, Anycubic i3 mega, etc.



Package Includes:



10 x Brass 0.4mm nozzle



Warm Note:



☞After replacing the nozzle, please re-calibrate the distance between nozzle and build plate to ensure the quality of print parts.

☞Small parts, please keep them away from children.

• Parameter: input diameter 2.00mm; output diameter 0.4mm, out thread: M6, a set of 10 pcs printer nozzles and the outer surface is marked with a size, so you can easily identify the specifications of the nozzles.
• Applicability and Compatibility: Our nozzles fit for Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc, compatible with all E3D V5 V6 1.75mm PLA ABS 3D Printers. Fit exactly like the original.
• Strict craftsmanship: FEMBW nozzle strictly follows making standard, Greatly extend its service life. The inner wall adopts arc structure reduce the pressure required to extrude the filament, Can quickly flatten the filament that achieving improve the stability of the entire nozzle and print quality.
• Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
• Cleaning Needles: FEMBW E3D 04 nozzle set contains 5 stainless steel cleaning needles, they are very flexible pliable and tough, perfect to handle tough extruder hot end nozzle clogs.

Product description

MYSWEETY mk8 extruder, come with assembled, support 1.75mm pla, abs, flexible tup, wood filaments and so on, widely used in prusa i3 3d printers, especially for Reprap, MakerBot, Anycubic, Hictop Mendel prusa i3 3d printers.



NOTE:

❥Make sure the maximum temperature is less than 280°C.

❥Thermistor sensor is risky demaged if it is fasten too tight.And please do not be panic if it is fallen out as arrived ,it is easy to reset.

❥Compatible with most prusa 3d printers with some slight modifications,if you would like to install on Anet A8,please cut the thumb bar of the extruder frame for carriage mounting.



Specification:

Default extrusion nozzle: 0.4mm; 0.2/0.3/0.5mm optional

The material of Print: 1.75mm PLA/ABS/Wood/Flexible

Operating temperature Normal: 190-250 ℃

Throat: M6 X 30mm

The voltage of heating nozzle: 12V

Cartridge heater: 12V,40W, 1 meter lead

Thermistor: 100K NTC, 1 meter lead

Cooling fan: 12V 4010 fan

Stepper motor wire: 1 meter

The flow rate of Nozzle: about 24cc / h

Sports shaft speed: 40mm/s

Net weight: 450g

Stepper Motor: Nema 17 Stepper Motor, 4 Wires

Number of Phase: 2

Step Angle: 1.8 deg

Rate Voltage: 3.3V DC

Holding Torque:1.5A

Phase Resistance: 2.2ohms±10%（20℃）

Motor Torque:40Ncm/57.1 oz.in

Phase Inductance: 3.8mH±20%(1KHz)



Package Include:

1xMK8 Extruder(0.4mm nozzle)

1x0.2mm MK8 nozzle

1x0.3mm MK8 nozzle

1x0.5mm MK8 nozzle

1 x1 Meter stepper motor wire

• Assembled mk8 extruder come with 4 print nozzles; Diameter: 0.4mm defaulted; 0.2mm, 0.3mm, 0.5mm optional.
• It is compatible with most prusa i3 3d printers with some slight modifications when mounting it.
• Filament size: 1.75mm PLA/ABS or other 3d print materials. Flow rate of nozzle:max 100mm/s, support for high speed printing.
• Nema 17 high quality stepper motor with larger torque and less heat buildup.
• Special ceramic insulation cotton ensure the hotend can heat to a high temperature fast and stably.

User questions & answers

Question:	is this extruder compatible with the hictop 3dp-11 printer
Answer:	yes, UV resin curing light is 405nm. It is compatible with most standard 405nm resin.
Question:	Will this work on Anycubic i3 mega
Answer:	I am currently using Elegoo Standard Photopolymer Resin - Grey. I ran the Light Box for 240 seconds just five minutes ago .. no tacky feel at all .. completely cured (running the resin at 8 sec a layer with initial 60 sec per instructions on the bottle.
Question:	Will this fit on my rep rap prusa i3 v2? And what mods need done
Answer:	No, any 3D resin that cures at 405nm UV wavelength will work in this, not just elegoo.
Question:	Which thermistor comes with this? I see that it is 100K but it would be helpful to know which setting to use in Marlin
Answer:	No, I don’t think so since it's not full spectrum UV

Product description

Product description

Characteristic

The shape is smooth and glossy with lettering, the chamfer is rounded, which can reduce the resistance of the corners, and avoid blocking of the filament, and the contact surface is smooth, which can effectively prevent print head from leakage

Hexagon extruder brass nozzle print head with different lettering, which is easy for you to identify, and the screw head connection can be connected well with the other end.Also,there is a spanner which is more convenient to make a replacement for the Nozzle

Specifications

Type:extruder print head

Material:Brass

Color:golden

Thread:M6

Package Include

5pcs 1.75/0.4mm J-head extruder nozzle

1pcs spanner

• Bore diameter: 0.4mm
• Screw thread inner diameter: 1.75mm
• Height: 12.20mm
• Net weight: 2.5g/pcs
• Widely use for 1.75mm PLA filament

User questions & answers

Question:	will this fit the monoprice select mini v
Answer:	These are for the MK8 hotend. Not sure what hotend you have on the Anycubic.
Question:	Does it come with the heater block in the picture? also, does this fit cr-10 max
Answer:	Sorry, I do not know what extruder you have on that printer but my guess is that it will.
Question:	Do these fit sunlu S
Answer:	Brass
Question:	does it work with mp select mini
Answer:	They fit my Prusa i3 with no problem. Not sure about Duplicator however most of the printers have the same sized threads on the nozzles.

• Silent Motherboard: Adopt a silent TMC2208 stepper drivers mainboard always ensure smooth movement under 50dB, no noise during printing.
• MeanWell Power Supply: Equipped with a new Meanwell power supply that delivers stable and consistent power for the best performance.
• Resume Printing & Convenient Filament Feed-in: The machine can automatically resume printing after power-off or filament breakage. Less worries on print failure. Rotary knob added on the extruder makes it easier to load and feed filament.
• Carborundum Glass Platform: The Carborundum glass platform enables the hotbed to heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
• New User Interface: Newly designed operation UI system, convenient disassembly and simple operation.

User questions & answers

Question:	Has anyone printed abs with this? did it work with the out of the box components
Answer:	I would at least upgrade the ptfe tube but it should be able to stock.
Question:	I am ordering this printer as a gift .. do I need to purchase filament separately or is there a supply included with the printer
Answer:	This item comes with a little sample filament. If you want to print more, you need to purchase the filament.

Product features

User Friendly Design

Perfect design of extruder, brass nozzle with heat resistance.

Effortless Filament Feed-In

Rotary knob added on the extruder makes it easier to load and feed filament.

Brand New User Interface

User experience greatly upgrades with the newly designed operation system, convenient disassembly and simple operation.

Glass Platform

The glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.

Big Leveling Nuts

The Ender 3 V2 3D printer comes with 4pcs big leveling nuts under the hot bed, which make it much more easier to level the hot bed.

V-guide Rail with High Standard

Ender-3 V2 uses a V-guide rail pulley with stable movement, low noise, high wear resistance and long life.

User questions & answers

Question:	Do these require a custom extruder or do they work with the stock one
Answer:	I think that they are interchangeable know they fit the ender 3 and 3 pro 5 and 10
Question:	Would it work for monoprice Delta Mini
Answer:	Yes
Question:	Will these fit an Anycubic I3 Mega
Answer:	Measure your existing nozzle, and purchase as required.
Question:	Will these work for a monoprice select mini
Answer:	I can't say for that model, but they fit the Monoprice Select Pro Ultimate 3D Printer. I'm happy with them. Just to make sure, measure the threaded portion of your existing nozzle to see if it is an M7 thread. [ ~7.0mm ]

Product features

3D Printer Nozzle Cleaning Kit:

Material: stainless steel

Bit diameter: 0.2mm 0.3mm 0.4mm 0.6mm 0.8mm

Free box: convenient for collecting the cleaning kit.

Package Includes:

3x 0.2mm Printer Nozzle

5x 0.4mm Printer Nozzle

3x 0.6mm Printer Nozzle

2x 0.8mm Printer Nozzle

2x 1.0mm Printer Nozzle

1 x 0.2mm cleaning needle

1 x 0.3mm cleaning needle

1 x 0.4mm cleaning needle

1 x 0.6mm cleaning needle

1 x 0.8mm cleaning needle

• Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.
• Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
• Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
• Package Include--Printer nozzles come with 24 pieces MK8 nozzles in 7 sizes(quantity x output diameter): 2 x 0.2mm, 2 x 0.3mm, 12 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm,with a plastic box for storage.
• Parameter--Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm

User questions & answers

Question:	Do these fit an Ender 5 Plus
Answer:	They should. They fit my Ender 5.
Question:	How often does one go through these nozzles? How can I tell if I need replacement
Answer:	I’ve been on the first nozzle of the set for about 3-4 months now. Keep bed level so it doesn’t drag across bed, avoid abrasive filaments and they’ll last for quite some time. Also I use an Oiler on my filament to help prevent clogs. I’m about to change this one out but only to use the smaller nozzle for higher detailed mini prints.
Question:	Do these work with cr-10s pro
Answer:	No I do not think so. I use these on my CR10S. I have a CR10Max and it has the same extruder as the Pro. The thread size is different between the Pro/Max to the CR10. I almost cross threaded mine before I realized.
Question:	Does this product work on the Ender
Answer:	Yes these work for the ender 3

Product features

Fit exactly like the original

3D Printer Makerbot Creality CR-10

MK8 Makerbot Reprap Prusa I3

Compatible with all 1.75mm PLA ABS 3D printer

Specification

Color: Gold Material: Brass Output Diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm Input Diameter: 1.75 mm Screw Thread: M6 Hexagon Diameter: 6 mm

• 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
• 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
• 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.

User questions & answers

Question:	Does this Hands 2 3D Printer come fully assembled
Answer:	No, it doen't not, but it is pretty easy to assemble. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
Question:	What is Tenlog offical website
Answer:	www.tenlog3d.com
Question:	Does the printer work with windows
Answer:	Dear customer Our Tenlog 3D Printer support XP, Windows 7/8/10, Linux
Question:	Does Tenlog 3D Printer have official facebook group or public account
Answer:	Dear customer, it is our facebook official public account:https://www.facebook.com/Tenlog/ facebook group:https://www.facebook.com/groups/752964928487976/ official website:https://www.tenlog3d.com/

Product features

Product details：

Modeling Technology: FDM (Fused Deposition Modeling）

Printing Size: 220*220*250mm /8.6''x8.6''x9.84''

Printing Speed: 10-150mm/s, Recommended 30-60mm/s

Filament: 1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE

Input: AC 100-240V 50-60Hz

Output: DC 24V 15A

Layer Thickness: 0.1-0.4mm

Nozzle diameter: 0.4mm

Additive manufacturing accuracy: ±0.1mm

File Format: STL, Jpq, G-Code

Max Nozzle Temperature: 300℃

Max Hot bed Temperature: 110℃

Dual Material Printing

You can use two colored filaments to print on the model to obtain two-color models, or use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.

Duplication Mode Printing

You can print two identical models of filaments (or the same or different filaments) of the same color or different colors on the TENLOG 3D printer at the same time, thereby doubling the printing efficiency and saving you time!

Mirror Mode Printing

You can print two symmetrical models of filaments (or the same or different filaments) of the same color or different colors on the TENLOG 3D printer at the same time,the two nozzles are dual-driven at all times for printing, and the two models are immediately aligned with the mirror.

Dual Material Printing

You can use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.

Put in water

Put the printed model with water-soluble support into the water.

Support melts

After putting the printed model with water-soluble support in water for a period of time, the water-soluble support will fall off the printed model

Resume Printing Function

In the event of an unexpected power outage or surge, the control board will remember the last recorded position of the extruder. After the power is restored, The 3D printer will resume printing from the last recorded position.

Filament Runout Detection

When the filament runout detection detects that the filament such as PLA or ABS are used up or broken, the 3D printer will save the information and suspend printing, waiting for the 3D printer to feed the filament again to continue printing.

Upgrade borosilicate glass bed

TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.

Unique near-end and direct drive design

TENLOG 3D Printer uses a direct drive extruder and a powerful near-end silent motor design,so that it can print various filament,such as TPU,PVA,PLA,ABS,HIPS,WOOD,PETG,flexible.

Product description

1

• ✿Applicability and compatibility✿: E3D extruder nozzles fit for 3D printer Makerbot Creality CR-10, MK8-Makerbot Reprap Prusa I3, compatible with all 1.75 mm PLA ABS 3D printers. Fits exactly like the original.
• ✿IeferDelivery scope✿: The printer nozzles come with 4 X 0.4mm, 2 pcs (0.2.0.3.0.5.0.6,0.8.1mm), E3D nozzles with 5 nozzle cleaning needles, two clamps, one nozzle cleaning brush.
• ✿YpType: extruder die head made of brass✿: screw thread: external thread M6; Hexagon diameter: 7 mm Durable material: These nozzle print heads are made of high quality brass, robust and durable.
• ✿Precise design✿: 3D printer nozzles can effectively prevent the print head from leaking and produce consistent prints with smooth and glossy varnish. Reduce the resistance at the corners and avoid blocking the filament with a rounded chamfer nozzle.
• ✿High quality✿: Usongshine is a company specializing in 3D printers and 3D accessories. All products are subject to strict quality controls before they leave the factory.

Product description

ANYCUBIC 12V 40W Updated Straight-type V5 J-head Hotend For I3 Mega 3D printer

• Compatible with I3 Mega, I3 Mega X, Mega S 3D printer;
• All Metal Hot end:Equipped with 12V 40W cartridge heater and NTC3950 thermistors ；Heat resistant with aluminum heating block, the temperature can reach up to 250℃;
• Easy to Install:Both of the thermistor and heating rod come with connector,very easy to install；
• Filament Compatibility: 1.75mm PLA/ABS/WOOD/PETG/TPU;
• Quality Brass Nozzle:0.4mm

User questions & answers

Question:	Will this work on an Anycubic Kossel (Delta
Answer:	I think so. Looking at the Hictop printer vs ours, they are very similar. We (ie, my son) did have to do a bit of re-engineering to make the new extruder fit, but nothing major. It is working fine. Hope this helps. (Side note: the new print nozzles has improved our print quality.)
Question:	Is it all metal
Answer:	Yes. it can.
Question:	Will this work on a Chiron
Answer:	Mine fit. You’re gonna need to splice the wires together though. Or I did at least
Question:	Will this work on anycubic x
Answer:	Mine was a 100K ATC (#5 in Marlin) -- I know the description says "NTC" but that's wrong. -- If that setting doesn't work on your printer (or it comes on screaming and beeping) check the resistance manually using a voltmeter -- the problem I had was that mine came crimped in and the leads were shorted out to the metal. -- Adding some kapton tape to prevent the shorting should fix the issue.

Product description

This hot end is a replica of the newest, popular V6 hotend, this not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates typical hotend meltdown failures associated with other types of hotends. The latest hotend has a PTFE liner that slides inside the the upper portion of the heat brake, to help prevent misalignment of the filament, which is never subjected to high temperatures so there is no risk of damaging the liner through overheating.

For Marlin firmware, under THERMAL SETTINGS -> #define TEMP_SENSOR_X (X being your extruder #) you should use # 11: 100k beta 3950 1% thermistor (4.7k pullup)



Specification:

Type: V6 J-head, can be used either as bowden or direct feed style

Thermistor: NTC 3950 100K (Marlin users should use Table 11 to define temp sensor)





Package contents:

1 x Metal J-Head hotend for 1.75mm w/ 0.4mm nozzle

1 x NTC 3950 100K Thermistor, with leads and dupont connector

1 x 12V 40W Heater

1 x Heatsink shroud with 12V 0.13A High Speed Cooling fan

1 x 3ft long, 4mm OD, 2mm ID, PTFE Bowden tube

2 x Quick connect straight fittings

• 3D printer hotend, Metal J-Head v6 compatible hotend for 1.75mm filament, w/ 0.4mm nozzle
• Heatsink Shroud and high speed, 12V 0.13A cooling fan / NTC 3950 100K thermistors, w/ leads and dupont connector
• 12V 40W heater / 3ft long, 4mm OD 2mm ID PTFE bowden tube and quick connect fittings
• Hot End can be used for: ABS, PLA, PETG, and most any other conventional print materials
• This hot end can reach over 230C, for high temperature performance.

User questions & answers

Question:	How large of a nozzle can be added successfully on this? I would like to go up to 1.2mm but am unsure if a volcano mod is necessary
Answer:	Well, the thread length for the V2 is 6.5mm. So, the threads fit, but, these are sized for the E3D which is over 7mm long so you'd have some extra length and lose some Z space.
Question:	I messed up the ptfe quick connect going into the hotend, is that quick connect removable
Answer:	This is just a 5 of the nozzles pictured. There is no heater block or other hot end components. It should fit the CR-10 max, they should work in all E3D clones.
Question:	Will this work for the monoprice mini (v2)? i bought an e3d v6 clone that kept clogging on me and need to upgrade
Answer:	No. Sunlu S8 uses MK8 nozzles
Question:	Does this part come with the older style glass thermistor or the newer design larger metal thermistor
Answer:	The threaded part is a little longer than the minis but will still work.