13 best hot end 3d printer

• Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 Pro / Ender 5 / TronXY X5S
• Orifice size: .4mm
• Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
• This is a Drop in All Metal Conversion Kit for Creality printers
• Made in USA by Micro Swiss

User questions & answers

Question:	Se puede usar en Ender 5 Pro
Answer:	It’s not that hard . There a instruction. That you can fellow. Printer that you are using is the same thing.. but these are better got two.
Question:	Is a higher wattage power supply upgrade needed to print materials with higher temps than pla or abs
Answer:	Thanks for reaching out, Lauren! YES, Creality Ender 3 like most all 3D Printers has a 0.40mm nozzle diameter by default! :-) All the best, Kris from Springdale
Question:	IS this all i need to replace the stock CR-10s nozzle or are other components needed
Answer:	Hi Nathan, thank you so much for pointing that out! You are correct, it should indeed read "needles" as in the description - fixed. :-) All the Best, Kris from Springdale
Question:	What is the recommended torque setting for swapping nozzles on this hotend...and should it be heated when swapping
Answer:	About 76mm in length. 3” and seem flexible enough to angle into a clog from lower end or long enough for upper approach.

Product features

Micro Swiss All Metal Hotend Kit for CR-10 / Ender Printers:

This is a drop in All Metal Conversion kit for the CR-10 / Ender printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates need for a thermal tube. By not having a separate thermal tube inside the cooling block, it allows for faster heat dissipation.

The thermal heat break is made from Grade 5 Titanium Alloy to provide excellent thermal isolation between the heater and the cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creating more defined meltzone.

Fits:

• Creality CR-10
• Creality CR-10-S
• Creality CR-10-S5
• Creality CR-10-S4
• Creality CR-10 MINI
• Creality CR-20 / Creality CR-20 Pro
• Ender 2 / Ender 3 / Ender 3 Pro / Ender 5
• TronXY X5S
• TronXY X5S
• Tevo Tornado

What's in the box:

• Aluminum Cooling Block
• Grade 5 Titanium Heat Break
• Aluminum Heater Block
• Brass Plated Wear Resistant MK8 .4mm Nozzle
• Silicone Sock
• Hardware kit

Product description

Please noted that the pins is clamped with long nose pliers.



Specification:

Material: Aluminum & Stainless Steel & Brass.

Installation type: external thread connection

Nozzle size: 0.4mm

Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)



Package included:

Hot End Kit(Concluded Capricorn PTFE tube)

3*0.4mm Nozzle

3*Silicon Cover

• 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work for the same functions as the golden ones.
• Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
• Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
• With more terminal housing and pins as spare parts, in case fail installation and waste .
• MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

User questions & answers

Question:	Will this fit a tevo tornado? it's very similar to a cr
Answer:	It fit mine perfectly. I have the newer gold version of the Tevo Tornado.
Question:	Can I just swap in just the extruder hot end with the stock themister and heating tube
Answer:	yes, but you would just need to take off the wiring and re do it. was actually a bit easier to replace the entire thing
Question:	I bought this and installed it and it will only go up to 111 degrees c and takes 30 minutes to get there. any idea why? on an ender 3 plus clone
Answer:	I had a similar problem with my ender 3 when i first got it. It turned out that the power supply was switched to run at 220V. I switched it to 110V input and it started working as it should.
Question:	I bought this and installed it and it will only go up to 111 degrees c and takes 30 minutes to get there. any idea why? on an ender 3 plus clone
Answer:	This is a 24v unit. You probably have a 12v controller. If you swap the heater cartridge with a 12v one it will work fine. Double check with a multimeter on the terminals the heater connects to but this was my issue.

• ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
• 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
• ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
• MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
• TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)

User questions & answers

Question:	will this fit an geeetech a
Answer:	It's all you need. Reuse the heat block and replace the nozzle go on YouTube lots of how to install and replace micro swiss on cr10 and cr10s.
Question:	Does this work for the Ender
Answer:	Torque setting should be a smidge past snug. Basic install should be done while cool (don't burn yourself) with the final tightening of the nozzle done at full temp. Get everything mostly tight without the nozzle bottoming out, then run it up to 250c, let it soak for a moment, then torque down between the heaterblock and nozzle. Let it cool a bit, then install the Bowden tube and feed filament into the machine . . . And you're good to go. Expect to run the nozzle 5 to 10c hotter than you have been, particularly if you use a steel nozzle.
Question:	Does this come pre-wired? At least at the opposite end of the extruder. I see just bare wires but a review says pre-wired. Confused
Answer:	As long as the heating cartridge fits you shouldn't have a problem. I'm not familiar with the MK10 heating block, but again as long as it fits it should be fine. If there's too much of a gap or risk of it falling out - potentially catching the print on fire - I'd buy another heater cartridge that's v6 compatible.
Question:	Does this work for the Ender 3 Pro V
Answer:	Yes

Product features

3D Printer Extruder Assembled Hotend for Creality Ender 3 /Ender 3 Pro /Ender 3X

Note: The Ender 3 Extruder Head Kit Comfortable for Creality Ender 3 / Ender 3 Pro / Ender 3X

These are original replacement parts for Creality 3D printer Ender 3 Pro /Ender 3 /Ender 3X.

Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) Ender 3 Extruder Hot End Kit,

white wire was temperature thermistor, Black wire was heating tube 24V 40W

- Installation type: External thread connection

- Application: Creality 3D printers Ender 3 /Ender 3 Pro /Ender 3X

- Nozzle size: 0.4mm - Cable length: 1.2m

- Heating Tube: 24V 40W

- Operating temperature range: -40~+260°C (-40~+500°F)

- Material: Aluminum+Stainless Steel+Brass

- Throat length: 52mm

- Aluminum block size: approx. 20 x 20 x 10mm

HIGH QUALITY TEFLON TUBE and BRASS NOZZLE

Teflon tube: PTEF, heat and moisture resistance,non adhesion, wear and corrosion resistance.

Thermistor and heating tube: High quality thermistor and heating tube are up to 260℃,with rapid-risen temperature, precise temperature control and good stability.

NOZZLES and Hoses: The optimized internal structure of seamless connection between nozzle and heatbreak accelerates the extruder to dissipate heat and the heatbreak to insulate heat, letting go of the nozzle blockage.

Full Metal 3D Extruder Kits Hotend 24V 40W for Creality Ender 3/ Ender 3 Pro /Ender 3X

INTEGRATED SHELL OF ALL METAL

FULL METAL JACKET: Sturdy and wearable

STABLE RUNNING: Non-blockage, non-leakage

HIGH PRECISION: Heating and cooling system with high quality

The frosting surface of aluminum shell anodized for sturdy and more wearable;integrated structure and simple circuit are convenient for disassembly, repair and assembly.

What you get

Package list:

1 x Aluminum Block

1 x Heating Tube

1 x M6x30mm Throat Pipe (Built-in Teflon)

1 x Thermistor +Brass Sleeve

1x 1.75mm 0.4mm Brass Nozzle

5x1.75mm 0.4mm Brass Nozzle

NOTE: Ender 3 extruder kits be used on the original creality Ender 3 /Ender 3 Pro /Ender 3X. If be used to the other 3D models, customers need to afford to the responsibility by themselves, meanwhile, our after-service will not valid for this cause.Thanks for your understanding.

• Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
• Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
• Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
• Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
• Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 1 Pcs brass extruder nozzles(1x0.4mm), and a v6 heating block, 1Pcs tube within stainless steel nozzle throat

User questions & answers

Question:	will this work on my tevo tornado
Answer:	I used 220C. I think my temp sensor my be acting up.
Question:	Would this feed a 1mm wire? I know its made for 1.75mm but does it have enough movement to go smaller
Answer:	Yes, I have used this product and it is more of a yellow-gold than an orange. The picture on Amazon is accurate.
Question:	what is the wiring for this? Mine shows resistance pairs as black/red, green/blue which is not the way it is supposed to be
Answer:	About 35 mm
Question:	Is this an all metal hotend
Answer:	This item was for someone else.

Product description

3D Assembled Extruder Hotend All Metal Hotend Kit



FEMBW has always been concerned about product quality.

We are working hard to improve the products quality.

There are many cheap products on the market.But please believe in our quality and believe that you will not regret when you receive the goods.

FEMBW is committed to providing you with the best service!



Features:



Description: Material: Aluminum & Stainless Steel & Brass

Installation type: external thread connection

Scope of application: 3D printer

Nozzle size: 0.4mm

Throat pipe length: 30mm

Aluminum block size: 20 mm x 20 mm x 10 mm



Package included:



1x Aluminum Heater Block

1x 1.75MM 0.4MM Brass Nozzle

1x M6*30mm Throat pipe

1x Aluminum Cooling Block

• The metal hotend kit suitable for almost series of Creality Ender and CR printers. The hotend is pre-assembled for easy installation.
• HIGH PRECISION: Cooling system with high quality and the frosting surface of aluminum shell anodized for more sturdy and wearable; integrated structure are convenient for disassembly, repair and assembly.
• Rigorous Process: FEMBW Metal hotend strictly follows making standard, greatly reduce the risk of clogging and uneven extrusion, delivers you consistent output. So you from replacing the PTFE tube frequently, requiring less maintenance.
• The metal hotend kit can withstand higher temperatures, After replacement you’re free to print filament that has high temperature requirement, such as ABS, Nylon, and Polycarbonate etc.
• Our Hotend kit does not contain heating elements, but we reserve installation locations for the heating elements, so you can configure heating elements with different powers according to your personal situation.

Product description

Descriptions:

Please recognize the seller: Wangdd22

Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.



Notice: Small parts, keep away from children



Specification:

12V/40W heater,temperature can be up to 280°C（Long-term temperature: 240°C/ short-term temperature: 280°C）

12V high speed fan with shroud, radiating quickly

One meter long PTFE/teflon tubing 4mm OD 2mm ID

PC4-01 tube fitting

A v6 heating block

Outer thread : M6 M7

Throat outer diameter: 6mm

Throat inner diameter: 4mm

Teflon pipe inner diameter: 2mm

Length of nozzle throat: 22.5mm

Filament diameter : 1.75mm

Extruder brass nozzle input diameter: 1.75mm

Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm



Package including:

1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder

1 x 12V high speed fan with shroud

1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID

1 x PC4-01 Tube Fitting

1 x 0.3mm nozzle print head

1 x 0.4mm nozzle print head

1 x 0.5mm nozzle print head

1 x V6 heating block

2 x teflon tube within stainless steel nozzle throat

• Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
• Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
• Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
• Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
• Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), and a v6 heating block, 2Pcs teflon tube within stainless steel nozzle throat

User questions & answers

Question:	I'm trying to install this on a wanhao i3 that has a mk10 heating block. can i use the original heating element on the v6 block
Answer:	I think simple hand cleaning is more than sufficient,because that can pretect the the handles and aviod the rust on the blades.
Question:	With a cr-10. can i just use my original heat block sensor and t-stat inside this until i flash the software
Answer:	Yes, so sharp that can cut the poultry bones .
Question:	Does this have everything needed for a bowden 3d printer? my current printers hotend went out and its a bowden system. Thanks
Answer:	These are made of stainless steel, remain sharp and not rust,but you still need to take care it as a pair of scissors should be. Their quality is so great that they can be used long time.
Question:	Hi, will this work on a xyzprinting da vinci 1.1 printer
Answer:	Hello, thank you for your support us. Printer nozzles come with 24pcs MK8 nozzles output diameter: 2 x 0.2mm, 2 x 0.3mm, 12 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm, input diameter 1.75mm

• Good insulation effect with an ultra-thin wall thickness as thin as 0.1mm, realizing an excellent thermal insulation
• All metal kit with overall high temperature resistance up to 500 degree
• The Inner hole roughness of nozzle and heatbreak Ra0.4, which allow a more smooth movement of filament,resulting a higher resolution prints
• Increased rigid support structure guarantee the heatbreak remaining intact under the impact of external force
• Integral frame rigid structure makes Nozzle replacement more convenient without grasping the heatblock

User questions & answers

Question:	What kind of nozzles does this take? mk6? mk8? mk
Answer:	Many people use the same temperature that they would use with a brass nozzle. Others raise the temperate 5°C.
Question:	Will this fit an artillery sidewinder x1 v
Answer:	Search for the following ASINs in the Amazon search bar (one at a time): B07LC4H7T2, B07LC4RQVB, B07CHZVX3Q
Question:	can it fit wanhao d9 printer
Answer:	After I tinkered with the hot end setting, works great. I didn’t have any heat bed adherence issues, no flow problems, and it looks good.
Question:	Does this come with a thermistor and heater cartridge? if not, what part numbers do i need (24v for an ender 3 direct drive conversion
Answer:	with companys buying out others like mad lately i kinda doubt Ziro will be back, sad it was great filament

Product features

Four Size for Your Selection

There are 4 kinds of size, Aamzing appearance, you will love for the first impression.

High Flow in Black

High Flow in Blue

Standard Flow in Black

Standard Flow in Blue

The Basic Components of Hotend

All high quality compoents combine to the whole kit

Compatiblity

V6 Adapter Status Interface

• Fit for Prusa I3 MK3/MK3S
• Titan Extruder
• BMG Extruder

V6 Adapter Status

Mosquito Hotend related extruder and extruder

Rigid Structure

• Increase rigid support structure gurantee the heatbreak remining intact under the impact of external force
• Integral frame rigid structure makes Nozzle replacement more convenient without grasping the heatblock

Good insulation effect( High Flow)

heatbreak with an ultra-thin wall thickness as thin as 0.1mm, realizing an excellent thermal insulation

High Printing Accuracy

The Inner hole roughness of nozzle and heatbreak Ra0.4, which allow a more smooth movement of filament,resulting a higher resolution prints

Small Accessories for more convenient

It's super convenient to come with there small pieces, all kinds of Wrench,screw and silicone Stock

High Temperature reach to 500°C

If the temperature of your extruder is above 250 degrees for a long time,

please take off your silicone stock, it will be damaged if the temperature is above 250 degrees for a long time

• Fits: CR-10S Pro / CR-10 Max
• Orifice size: .4mm
• Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock, Hardware kit
• This is a Drop in All Metal Conversion Kit for CR-10s PRO and CR-10 Max printers
• Made in USA by Micro Swiss

User questions & answers

Question:	Can I use an Olsson Ruby nozzle with this hotend
Answer:	The heater cartridge ends in bare wires as they usually do. Normally they attach to screw down to a terminal block. Thermistor cable is terminated with the usual just connector
Question:	Una pregunta funciona con ender
Answer:	this extruder hot end works with for the ender 3, ender 3 pro. however, it does not work with ender 3 V2.
Question:	will this fit CR10S (not pro
Answer:	you can set 100K 3950 in Marlin
Question:	Does it work with ender
Answer:	Yes it does come with 3pcs the standard 0.40mm nozzle and one piece 0.30mm 0.50mm nozzle.

Product features

Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO:

This is a drop in All Metal Conversion kit for the CR-10s Pro printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates need for a thermal tube. By not having a separate thermal tube inside the cooling block, it allows for faster heat dissipation. The thermal heat break is made from Grade 5 Titanium Alloy to provide excellent thermal isolation between the heater and the cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creating more defined meltzone.

Fits:

• Creality CR-10s Pro
• Creality CR-10 Max

What's in the box:

• Aluminum Cooling Block
• Grade 5 Titanium Heat Break
• Aluminum Heater Block
• Brass Plated Wear Resistant MK8 .4mm Nozzle
• Silicone Sock
• Hardware kit

Product description

The extruder hotend is one of the most important parts of a 3D printer. It is responsible for melting the 3D printer filament and depositing it onto the print bed to form a solid object. A 3D printer won’t be able to do its core function without it.



Futuresses V6 Hotend Metal Extruder



The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application.

Product Features :

• Input Diameter 1.75mm
• Easy to Install
• Anti-Leakage & Anti-Blocking Design
• Assembly with High-Temperature Thermal Grease.
• 1.75mm Transparent PTFE Tube
• High-Temperature Resistance Up to 280° C
• Compatible with all 1.75mm V6 Makerbot 3D printer
• Hotend is equipped with NTC3950 Thermistor and 12V 40W Heater
• All Metal Throat
• V6 Connector
• Heatsink
• V6 Block

Package Includes :

• 1X V6 Metal Hotend Extruder
• 1X PTFE Tube 1.75mm, 40-inch Length
• 1X Nozzle 0.4mm

Customer Satisfaction is our top priority and significant to us. So if you have any issue with our V6 J Head Hotend or you are not happy then feel free to contact us. Our dedicated and professional team is always available for best Customer Support. We always offer 30 days no question ask return/refund option to our clients. If the item you received is faulty, damaged, or any further problems, you can return it for replacement or refund. 

• ✔️ V6 HOTEND QUALITY: V6 Hotend Metal Extruder Assembly with High-Temperature Thermal Grease.
• ✔️ 3D PRINTERS COMPATIBILITY: 3D Printer Hotend V6 Extruder Compatible with all 1.75mm V6 Makerbot 3D Printers.
• ✔️ J Head V6 SAFE DESIGN: Anti-Leakage & Anti-Blocking Design Prevent Print Material from Leaking or Blocking
• ✔️ PFTE TUBE: 1.75mm PTFE Tube Transparent Clear High-Temperature Resistance Up to 280° C. PTFE 3D Printer Tube is the most Flexible Fluoropolymer Tubing as compared with FEP, PFA, ETFE, ECTFE.
• ✔️ SATISFACTION GUARANTEED: Based on the confidence in the quality, our Hotend 3D Printer Metal Extruder is protected by worry-free support. Customer satisfaction is our top priority.

User questions & answers

Question:	I purchased this to upgrade my Ender 3's hot end. Will this work on an Ender 3 with a correct mount
Answer:	These are a tungsten heavy alloy of 97% tungsten.

Product description

- Installation type: External thread connection

- Application: Creality 3D printers CR-10 CR-10S S4 S5

- Nozzle size: 0.4mm

- Cable length: 1.2m

- Heating Tube: 12V 40W

- Operating temperature range: -40~+260°C (-40~+500°F)

- Material: Aluminum+Stainless Steel+Brass

- Throat length: 52mm

- Aluminum block size: approx. 20 x 20 x 10mm





Included:

1 x Aluminum Block

1 x Heating Tube

1 x M6*30mm Throat Pipe

1 x Thermistor +Brass Sleeve

1x 1.75mm 0.4mm Brass Nozzle

User questions & answers

Question:	How do u get melted filament off this garbage they call a hot end
Answer:	Hugh? It’s not made for wire.
Question:	will this work on the Ender
Answer:	Connection: Black(A+), Green(A-), Red(B+), Blue(B-)
Question:	Will this work with the Ender
Answer:	Not the all metal hotend
Question:	Is there a wiring diagram for this product? Seems like I need to solder these wires back together
Answer:	Many people use the same temperature that they would use with a brass nozzle. Others raise the temperate 5°C.

Product description

Creality CR-6 SE/Max Original 3D Printer Heater Block Silicone Cover

Material:Silicone

Color: Black

Compatible with Creality 3D Printer CR-6 SE/MAX Package included:: 3 x Silicone Cover

• Made of non-stick silicone material
• Helps to keep the hotend temperature extremely stable.
• Solve CR-6 SE/Max Won't Heat Up Error/Issue
• High temperature resistance: 280℃. Compatible with Creality 3D CR-6 SE/MAX 3d Printer only. Can extend the life of the heater block and extruder by keeping it cleaner.
• Noted: This item is sold by a 3d printer nerd and he is an expert on the CR-6 Printer. Feel free to ask him questions about that printer. He might suggest you the correct solution.

Product description

24V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 24V high speed fan, lose heat quickly.

• High quality aluminum alloy material for better heat resistance and pressure resistance.
• The surface of the extrusion head and the nozzle are plated with anti-corrosive materials, which are beautiful in appearance and have a longer service life.
• Supporting high-quality feeding tube, the outer layer of the power cord is equipped with a textile protective cover.
• Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking.
• 24V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 24V high speed fan, lose heat quickly.

Product description

Specifications:

Material: Aluminum Alloy

Scope of Application: CR-6 SE 3D Printer

Package Included: nozzle kit+axial fan+thermistor+auto-leveling sensor+heating tube+PTFE tube+led light+silcone sock+blower fan+screws

Nozzle: 0.4mm Size (Brass)

Item Weight: 180g

Package Size: 104*94*54mm



Package included:

1 * Full Assembled Extruder Kit

• Package Included: 1 piece White PTFE Tube, 1 piece 0.4 mm Nozzle, 1 piece CR-6 SE Hot end with cartridge heaters & thermistor included, 1 piece CR-6 SE Fan & Cover, 1 piece CR-6 SE Hot end LED, Fan & Z Pressure controller board, 1 piece Back Plate with rollers, 1 piece Hot-end silicone sock
• Cooling systerm:Dual fan design promotes more effcient heat dissipation and quick to cure the model, which ensures the high print precision.
• Smart leveling sensor with high precision:leveling-free sensor with high prcisoion and low porer consumption can transmit the accurate data, the standard deviation is only 0.005mm, No worries to level.
• High Thermal Conductivity and Quick to Heat: The asvanced thermistor and heating tube assembly can heat quickly and sense the temperature of the nozzle timely.
• Insulation silicone sock with flame retardant:Equipped with flame retardant material, it has good heat preservation effect and effectively keep the heat block and nozzle clean.

User questions & answers

Question:	Does this include the PC board
Answer:	May not be worth it. You’d have to reverse engineer that plug. Good for quick hot end swaps once you do though.