7 best masonry blade for angle grinder

Product description

Diamond masonry blade - high performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal. Thinner kerf to increase speed of cut while minimizing dust. Applications dry cutting Block, masonry Siding products and other masonry materials. Faster cut rate at a constant depth. Ideally used on thinner and softer masonry materials.

DeWalt's 4-1/2-Inch High Performance Masonry Diamond Blade provides long life and enhanced material removal. It has a thinner kerf to increase speed of cut while minimizing dust, and achieves 30 times longer life than bonded abrasives. This blade is best for cutting block, masonry siding products, and other masonry materials. It offers a faster cut rate at a constant depth, which is ideal for thinner and softer masonry materials.

From the Manufacturer

DeWalt DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry

• The product is 4-1/2" HiPerf MAS Blade
• Easy to use
• The product is manufactured in China
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Will this fit the cordless dewalt 4 1/2 dcg412? thanks
Answer:	It will fit any 4 1/2". Cord or no cord is irrelevant.
Question:	Will this grid carbide bits
Answer:	This a Diamond Saw Blade, its used to cut tile, brick, concrete, Masonry type work. Not intended for cutting metal. I cut tile and concrete with mine.
Question:	Will this fit a DeWalt model D28402W
Answer:	Yes, you can use this with the DW402 but you need to get the DW4706 Backing Flange. Amazon sells it for $2.99 as an add-on item. You need this flange for any type 1 cutting wheel used on a type 72 grinder (cupped surface disks). BTW, the arbor is 7/8" for disks that don't screw on, and 5/8" threads for those that do screw on. Hence you need cutting disks, like this one, with a 7/8" arbor. This applies for all grinders, not just Dewalt.
Question:	Will this blade cut cast iron pipe
Answer:	it will cut steel but it will wear it out very fast . i am a mason and cut rebar with these blades all the time . not sure about cast iron but softer steel they will cut although they are not intended to be used for that

Product features

Diamond Saw Blade

High Performance diamond matrix provides longer life and enhanced material removal with a thinner kerf to increase speed of cut while minimizing dust. Used in applications such as cutting block, masonry siding products, and other masonry materials.

• High Performance diamond matrix provides more life of conventional abrasives and enhanced material removal.
• Thinner kerf to increase speed of cut while minimizing dust.

Product description

Professional tool for commercial or occasional use

For raking out old Mortar prior to re-pointing.



Raking disc suitable for all makes of grinders

Impregnated with diamonds.



Max 13200 rpm.



Disc Dimensions:



115mm x 6mm (Thickness) x 22.2mm (Bore)

• Depth: 6mm
• Bore: 22.2mm
• Max Speed: 13200 RPM
• 80m/s
• Single Disc

User questions & answers

Question:	can you grind cooked steak meat
Answer:	Vietnam
Question:	I lost the inner blade part, where can I get for this machine
Answer:	An 11 women's Croc is a 9 in men's.
Question:	does this grinder have the cookie cutter attachment
Answer:	It will be a little bit smaller, but I have no such problem with the same shoes I bought in other places, they are all very standard sizes there, this is the place, link:bronaxshoes。com
Question:	How many blades come with item
Answer:	I wear a 10 1/2 normally and i got 11s and they fit me pretty good. I think they would fit you fine

Product features

Cook to Inspire

CucinaPro is designed to inspire creativity and broaden the culinary experience of at-home chefs everywhere. We bring unique but familiar classics to your kitchen, with a goal of awakening new ideas and enriching the cooking process. We’re motivated by a love of gourmet cooking from around the world, and we’re committed to offering the best products for our customers.

Includes 3 Cutting Disks

Includes 3 different cutting disks in various sizes, so you can grind your meat exactly the way you like it. Use for all types of meat, and even make sausage!

Features Sturdy Tabletop Clamp

This high quality manual meat grinder features a sturdy tabletop clamp, so you can enjoy consistent, safe grinding on a stable surface.

Heavy Duty Cast Iron Construction

Crafted from heavy duty cast iron, this meat grinder is strong enough to grind all your favorite meats, and durable enough to last. Crafted with the same great quality you expect from all CucinaPro products.

Product description

DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor

The DEWALT DW4701 is a great addition to your 4-to-4-1/2-inch grinders. With an advanced diamond matrix, this blade provides a longer life and improved grinder application. It’s designed for consistency, with a straight and dependable depth of cut and a greater life span by 100 times more than the industry standard. Use this blade on a variety of tough applications, including concrete, stone, granite, brick, and tile. It measures 4-1/2-inches in diameter with a 5/8-inch and 7/8-imch arbor. This grinder accessory must be used with the DW4705 4-inch or 4-1/2-inch guard with show and the DW4717 4-inch flange or DW4706 4-1/2-inch flange.

From the Manufacturer

DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor

• Extended performance diamond matrix provides 350 times the life of conventional abrasives
• Ideal addition to 4-to-4-1/2-inch grinders
• Continuous rim turbo design provides optimal use in brick, block, and tile
• Large diamond segments with cobalt ideal for use across various product applications
• Works with concrete, stone, granite, brick, and tile

User questions & answers

Question:	will it cut threw I beams
Answer:	No
Question:	Will this blade cut granite,corian,marble and ceramic tile
Answer:	For the blade to function properly no water is needed but should wear a good mask and safety goggles because substantial cement dust is generated.
Question:	Can this blade, eith a 7/8" arbor be used with the d28402 grinder which has a 5/8" arbor
Answer:	Yes
Question:	According to specs -Works with concrete, stone, granite, brick, and tile. Will this blade cut metal
Answer:	Yes, cuts most any type of stone countertops. Go slowly to avoid chipping the edge.

Product description

Provides faster rate of cut at constant depth with 30 times the life of bonded abrasive blades. For cutting concrete, brick, and other masonry material. Max RPM 13,300. Edge thickness .080 inch. Arbor size 5/8 or 7/8

• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• Ideally used on thinner and softer masonry materials
• Faster cut rate at a constant depth

Product description

The product is 4-1/2" x 1/4" x 7/8" Arbor, Masonry Depressed Center Wheel, For Low Angle & Vertical Grinding. Easy to use. The product is manufactured in United States.

From the Manufacturer

DEWALT DW4524 4-1/2-Inch X 1/4-Inch X 7/8-Inch Concrete/Masonry Grinding Wheel

• The product is 4-1/2" x 1/4" x 7/8" Arbor, Masonry Depressed Center Wheel, For Low Angle & Vertical Grinding
• Easy to use
• The product is manufactured in United States
• Silicon carbide grain for long wheel life in all masonry materials
• High grain concentration for agressive grinding action and smoother running wheels
• Proprietary wheel design ensures durable long life wheels
• 3 full sheets of glass in every 1/4-inch wheel and 2 full sheets in every 1/8-inch wheel for added durability and safety

User questions & answers

Question:	Can I use this to cut expansion/contraction joints in concrete. I only need to go about 1/4" deep
Answer:	No, he doesn't talk.
Question:	Will it sand mortar joints to smooth them
Answer:	The dimensions are 9½"Wx5"Dx8"H. 1 lb. So that is 9 1/2 inches wide (left to right), 5 inches deep (front to back) and 8 inches high (top to bottom)
Question:	Can I use this wheel to smooth out the sharp cutting edge of marble
Answer:	It was larger than I expected with measurements of 9½"W x 5"D x 8"H. There's a picture on the Design Toscana website for the "zen gnome" that shows it in someone's garden, though, that will give you a good relational sense. :)
Question:	can it be used with angle grinder from other brands? I have a Bosch
Answer:	There is enough sand included to fill the zen garden tray. It is a little less than 1 pound of sand.
Question:	what is the arbor size
Answer:	No, the zen garden does not have a lid, sorry!
Question:	what is the arbor size
Answer:	Hi, The biggest water bottle size it can hold on side pocket is 32oz bottle with a 3.58” diameter. Thank you
Question:	How is it at cutting tile? Will it leave a nice surface
Answer:	Hi, The Daily Assist will fit up to a 15” laptop size. Thanks
Question:	Can it be attached to a drill
Answer:	It can be torn out to dispose of only. We couldn't figure out how to reattach it. Once the inside of my son's shoes became unbearably dirty we pulled out the liner and he continues to wear the shoe.
Question:	what hand saw removes a 1/4" interior cut from plywood
Answer:	Yes. I’m a size 13 I ordered size 13 and they are snug with the lining.

Product description

The Bosch 1375A 4 1/2 In. Angle Grinder features a powerful 6.0 amp motor that produces 11,000 no load rpm, making this compact grinder a powerhouse tool. It was designed for concrete contractors, vehicle fabricators and other professionals who need a compact grinder. With a well designed grip, lock on slide switch, two position side handle and 11,000 no load rpm, this workhorse can get the job done. It is well suited for metal fabrication, concrete restoration, pipe fitting and more. It uses Service Minder brushes that stops the grinder when preventative maintenance is required and epoxy coated field windings, for longer tool life. The lock on slide switch, two position side handle and 3.75 lbs. weight add to user comfort and control.

• Compact: Weighing only 3.75 pounds, the Bosch 1375A Angle Grinder is lightweight, compact, and ideal for metal workers, vehicle fabricators, plumbers and other professionals who use grinders on a daily basis
• Power: The angle grinder features a Powerful 6.0 amp motor to produce 11,000 no load rpm for professional cutting and grinding applications; The Efficient motor was designed with an extremely small field diameter, letting the user grind or cut with ease
• Comfort: The 1375A offers a 2 position side auxiliary handle specifically designed to angle to a natural position for maximum operator comfort; The top handle of the angle grinder is also ergonomically designed
• Convenient: The angle grinder also features Bosch’s Service Minder Brush System to eliminate guesswork and stops the tool when preventative maintenance is required; A 5/8 inches to 11 inch spindle works with a wide array of sizes, mounting the most popular accessories
• Durable: The 1375A angle grinder features an epoxy coated design to protect the tool from abrasive debris; It was also designed with a sealed switch to keep dust and debris from entering the switch mechanism

User questions & answers

Question:	is this product works on 220v
Answer:	Thank you for your question. The 1375A has an adjustment and removable guard. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Is the safety gaurd removable like on a dewalt
Answer:	"Thank you for your question. The brushes and commutator in your tool have been engineered for many hours of dependable service. To maintain peak efficiency of the motor, we recommend every two to six months the brushes be examined. The tool will stop once the brushes need replaced. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST."
Question:	Description says tool stops when preventative maintenance is required. This is a big problem. How does this work
Answer:	Hi,I bought this item and returned it. It was advertized as having a family of accessories which turned out to be not available. The item was fine as a basic grinder, but if you wanted stuff to add Bosch discontinued support. I bought the Bosch 1810PS 4-1/2-Inch Paddle Switch Grinder with Lock-On Switch instead which had the add on goodies available. I'm really grateful to Amazon because Bosch could care less that they advertized stuff that wasn't any longer available. Many of their tools are excellent, but some are lemons, and the company doesn't honor its claims.Good luck
Question:	Hello, I'm interested where Bosch Angle Grinder in your item is manufactured? i heard they should be made in Germany but can you confirm that? Thanks
Answer:	This product is not brushless. The 2780-20 is.

Product features

Bosch 1375A 4-1/2-Inch Angle Grinder

The Bosch 1375A 4-1/2 In. Angle Grinder features a powerful 6.0-amp motor that generates all-day power. This compact but powerful tool was created for metal workers, vehicle fabricators, plumbers and other professionals who use grinders on a daily basis. With a well-designed grip, lock-on slide switch, two-position side handle and 11,000 no-load rpm, this workhorse can get the job done.

Includes

4-1/2 In. Angle Grinder, Burst-Protection Guard, Auxiliary Handle, Flange Kit, Spanner Wrench, 4-1/ Inc. Abrasive Grinding Wheel.

Tool Longevity and Control

This angle grinder employs Bosch's signature Service Minder Brush System, which shuts off the tool when preventative maintenance is required. The auxiliary handle can be moved into two positions that are specifically designed and angled to a natural position for maximum operator comfort, and the top handle is ergonomically designed.

Compact Power

With the Bosch 1375A angle grinder, Bosch designed a highly efficient motor with an extremely small field diameter, letting the user grind or cut with ease and speed. The tool features a 6.0-amp motor and has an operating speed of 11,000 rpm, but it weighs in at only 3.75 Lbs.

Power On

The grinder features a lock-on side switch for continuous operation, and it's constructed to endure the rigors of all-day use with limited required maintenance. A 5/8 In. to 11 inch spindle works with a wide array of sizes, mounting the most popular accessories and the spindle lock allows for quick wheel changes.

Protection from Metal Debris

The Bosch 1375A Angle Grinder was designed with epoxy-coated field windings protect the tool from abrasive dust and metal debris. It was designed with a sealed switch to inhibit debris from getting into the switch mechanism to extend the tool life. The grinder comes with a burst-protection guard for user security.

Product description

5 pack, 4.5" x 0.045", metal & stainless cutting wheel, 7/8" arbor, thin .045" wheel design for fast burr free cutting, proprietary aluminum oxide grain combination for aggressive cutting action, proprietary material mix ensures durable long life wheels, 2 full sheets of fiberglass for durability & safety, fast burr free cutting.

From the Manufacturer

DEWALT High Performance .045-Inch Metal Cutting Wheels have a thin .045-Inch cutting edge design for fast burr free cutting. They have a proprietary aluminum oxide grain combination for aggressive cutting action and the proprietary material mix ensures durable long life wheels. They have 2 full sheets of fiberglass for durability and user safety. These wheels are ideal for high performance cutting in all types of ferrous metals and stainless steel.

• This are highly durable. Max rpm : 13300
• Thin .045-Inch wheel design for fast burr free cutting
• Proprietary aluminum oxide grain combination for aggressive cutting action
• Proprietary material mix ensures durable long life wheels
• 2 full sheets of fiberglass for durability and safety
• Fast burr free cutting

User questions & answers

Question:	Can i use these on my oerter cable drill? if so what sized arbor do i need
Answer:	The 402K - specifically, "K" model, comes w/plastic case. It, the plastic case, is a $15 add-on to the base 402 model (sold here for $74).If that's what *YOU* ordered, that's what you should have.
Question:	I need to cut a 1" case hardened steel shaft - hardness C60 to .08" depth. Will this blade work
Answer:	there are many types of wheels avail. depending on what your grinding, ( steel, alum, ceramic, concrete ect). this grinder accepts a wheel with a 5/8 hole. the point is don't buy a wheel rated for less than 11000 rpm. they will come apart and injure someone.
Question:	can i cut #4 rebar with this blade
Answer:	**YES** Definitely for the DWE402 Type 2 model. How do I know? I have one in my grubby paws, even as fingers are put to keyboard. Type 2 is the variant w/ the black paddle switch in the approx. bottom middle of the tool housing. The paddle itself does not lock, having a rotating lock-out device to prevent accidental "ON" operation. To lock tool in the *ON* position, start the tool, depressing the paddle switch. Once up to speed, a small, black "lock" button positioned near the motor vents (can't recall whether right or left side of housing) can be depressed, locking the paddle switch in a position to maintain just slightly less than full 11K rpm motor speed. A Type 1 variant, w/ slide switch, has a similar "lock" feature. Reference to Type 1 and Type 2 is NOT to guard types, rather to the tool itself, designating variants in the DWE402 model. As to guards, looking high and low for a Type 1 guard. The tool came w/ Type 27 guard. Type 1 guard is *required* when using a cutting disc, rather than grinding disc. Part number for the needed guard is #N311419, either out-of-stock or back-ordered in DeWalt Service/Parts stores. Any one know where to lay grubby paws on this guard?
Question:	can it cut galvanised steel
Answer:	I received a pack of ten.