14 best krinner christmas tree stand

Product description

Krinner's Christmas Tree Genie XXL comes with the greatest KRINNER inventions. No assembly required - no screws to tighten. The tree stand is equipped with the inventor's original single cable operation and a fully automatic water level indicator that takes the guessing out of watering your tree. Just place your tree in the opened stand on the spike, hold it straight and pump the foot pedal until the claws firmly hold the trunk. Done! Made in Bavaria - for a fool proof Christmas! You will find all technical details, more information and downloads on Krinner's website: www.krinnerusa.com.

• Simply pump the foot pedal Set up your Christmas tree in less than a minute! No assembly required, no screws to tighten!
• 20" (52cm) diameter extra-large tree stand, base weight 18 lbs. (8kg).
• Secures any tree up to 12 feet tall and trunks with 7 inches in diameter.
• Retains 2.5 gallons (11L) of water with automatic water level indicator.
• Made in Germany

User questions & answers

Question:	Would this work for a very large tree
Answer:	It's 24 inches tall, and it's beautiful.
Question:	Is the model that ships the new version with the water level indicator
Answer:	This little tree is UL listed, therefore is a plug-in with an ample length cord. I purchased an identical tree (gold bottom) from HSN last year and this one is much less expensive. It looks just like the photo--adorable!
Question:	what size tree can it hold
Answer:	They stay attached - it's a small tabletop tree that I just store "as is" in the box it came in.
Question:	is there a drainage hole for water
Answer:	My 3 gal. dwarf Alberta came in great condition. It was so perfect it looked like it had been groomed. Very healthy plant. I planted it right away and it is doing great. I have others that I bought at a local nursery that do not look as good as this one bought from Amazon. I would not hesitate to buy one from Amazon.

Product description

Krinner's Christmas Tree Genie L comes with the inventor's original single cable operation. It includes 5 stabilizer feet for additional security. It also comes with a water level indicator that is an easy to read gauge that automatically lets you know when to refill. Just place your tree in the opened stand, hold it straight and pump the foot pedal until the claws firmly hold the trunk. Your tree will be straight and ready in just seconds.

• Set up your Christmas tree in less than a minute! No assembly required, no screws to tighten!
• 18" diameter large tree stand, base weight app. 13 lbs.
• Secures any tree up to 8 feet (240cm) tall and trunks with 2 to 7 inches (3-17cm) in diameter.
• Water Level Indicator and 1 gallon water capacity
• Large water reservoirs keep your tree fresh and looking great

User questions & answers

Question:	What is the difference between the large and xxl
Answer:	It just plugs into the wall each time you want to turn it on
Question:	Is it made in Germany or China
Answer:	This is a sturdy tree. I don't know how heavy the ornaments you have but this tree is able to carry a little weight.
Question:	The descriptions seems to be mixed up between the large and large deluxe. Does the large deluxe come with the extendable feet and water gauge
Answer:	It took mine off, because a section of them went out. I replaced them with timed battery powered fairy lights and they look great.
Question:	What size for an8 foot live tree
Answer:	Bought one of these and had the same problem.

Product description

The Christmas Tree Genie is Krinner's most innovative stand. It comes with the original single cable operation, "Ding" technology that lets you know when the tree is secure within its claws and the patented safety belt for added security. Straightens and secures your live tree in less than 10 seconds. Ready to use out of the box. Patented foot pedal ratchet ensures quick, easy, 1 foot set up. Comes with an automatic water level indicator.

• Set up your Christmas tree in less than a minute. No assembly required, no screws to tighten
• Patented internal safety belt for maximum security
• The patented bell inside the foot pedal lets you know with a DING when the tree is held at maximum strength. The pedal locks itself simultaneously to avoid any accidental opening
• Krinner's Original single cable operation, Holds up to 2 1/2 gallon of water to maintain freshness
• Material Type: Plastic

User questions & answers

Question:	Is it okay to use the xx-large (deluxe) on trees that are only about 5 feet
Answer:	Not a question. Ask manufacturer for replacements.
Question:	Can it be used for a live tree outdoors ? if so how durable Is it against wind? I need some thing that will keep my tree from falling over in wind
Answer:	5 1/2 overall length x 3/8-16 thread
Question:	Is this a new tree stand, guaranteed
Answer:	It's a spike, not a pin. It works fine.
Question:	Can this be used for a 12ft artificial tree
Answer:	Good question. I would assume you could use WD-40 around the hinge area.

Product features

Krinner’s Original Single Cable Operation

Krinner's original single cable operation guarantees equal claw pressure around the trunk. This clever clamping device ensures that the tree stands absolutely firm and straight whether the trunk is thick, thin or crooked. No need for an axe or saw.

Ding Technology

The foot pedal has an integrated bell that 'DINGS' when the claws have securely closed around the trunk. At the same time the foot pedal is automatically secured in the locked position.

Water Reservoir

Keep your tree fresh and looking great! The Tree Genie XXL Deluxe holds up to 2.5 gallons (9.5L) of water.

Product description

This clever clamping device guarantees equal claw pressure around the trunk. Just place your tree in the open stand and pump the foot pedal until the claws have firm contact to the trunk. The Vario Classic tree stands absolutely firm and straight whether the trunk is thick, thin or crooked. Ideal to use indoor or outdoor. Suitable for trees up to 260 cm high. Trunk diameter: 12 cm. Tree stand diameter: 39 cm. Made from plastic material.

• Equipped with the original single cable operation
• The clever clamping device guarantees equal claw pressure around the trunk
• The tree stands absolutely firm and straight whether the trunk is thick, thin or crooked
• Large safety foot pedal for most comfortable handling
• Solid, galvanised metal base and claws

User questions & answers

Question:	what is the minimum diameter of a tree trunk that will fit
Answer:	It’ll cinch up to a small diameter tree trunk. I love this Christmas tree stand! The ONLY small downside is it doesn’t have a large water reservoir so you have to put a cup of water in twice a day. But it’s super sturdy and easy to use. (I think I have more some an answer than you were asking for-but it’s a great stand!)

Product description

Krinner, Large Tree Stand, For 8' Trees and Trunks Up To 6" Diameter, Holds 1 Gallon Of Water In Base, With Pop Up Water Level Indicator, Color Box.

• Krinner Usa
• 94735
• 3
• NEW
• 45

Product features

Krinner’s 5 Claw System

Krinner's original single cable operation guarantees equal claw pressure around the truck. This clever clamping device ensures that the tree stands absolutely firm and straight whether the truck is thick, thin or crooked. No need for an axe or saw.

Simply Pump the Foot Pedal

Just place your tree in the opened stand, hold it straight and pump the foot pedal until the claws firmly hold the trunk. Your tree will be straight and ready in just seconds.

Water Reservoir

Keep your tree fresh and looking great! The Tree Genie L holds up to 1 gallon (4L) of water. Easy to read gauge automatically lets you know when to refill.

Product description

Krinner Genie Tree Stand 2xl 7" Trunk Dia

Product description

Christmas Tree Genie Extra, Extra Large Tree Stand, For 12' Trees and Trunks Up Yo 7" Diameter, Holds 2.5 Gallons Of Water With Pop Up Water Level Indicator.

Product description

Krinner Vario Christmas Tree Stand is manufactured with a solid, galvanized metal base and claws guaranteeing long lasting use, season after season. Features a single cable technology ensuring no-fuss setup, large safety foot pedal allowing for comfortable handling and a compact water reservoir keeping your tree healthy and hydrated. Designed for trees up to 8’ tall with up to a 4.7” diameter and ideal for indoor or outdoor use.

• Galvanized metal base
• Safety foot pedal
• Ideal for indoor or outdoor use

Product description

Krinner Christmas tree stand green

• Diameter 15.4" / 39 cm
• Max. Trunk Diameter 4.7
• Max. Tree Height 7 feet / 2.20 m

User questions & answers

Question:	Can this stand be used for a 3 ft. tabletop artificial tree with 1 in. trunk diameter
Answer:	It is way to heavy for a tabletop tree. I would not use it for a table top tree.

• Knob control speed: the speed range is 20-68 sec/rev.(the maximum speed is 20 seconds per circle & the minimum speed is 68 seconds per circle)
• On/Off switch control the direction.
• Smooth and quiet rotations which make it convenience to display the products and take photos of the products.
• Portability: diameter is 7.87in and the net weight is 0.8kg,convenient to carry and keep.
• for display jewelry,glasses,bag,watch.

User questions & answers

Question:	Does it turn on automatically when plugged into the wall? Or do you have to press the on button? Can it be used with a smart switch
Answer:	So it has a regular switch so if you put a smart plug with it, it will work as intended.
Question:	Is this battery powered or power supply cord
Answer:	It has a power supply cord. It cannot use batteries. I've been using it for awhile know for photographing small objects and I'm very pleased with it.

Product features

Product Description

• Diameter: 20 cm
• Height: 5 cm
• Color: Black
• Net Weight: 0.8kg
• Maximum Load: 20 kg
• Packing: Carton
• Material: ABS
• Direction: The direction could be controlled by On/Off switch.
• Switch: On/Off switch on the base side & Knob on the base side controls the speed.
• Speed: 20~68 sec/rev (the maximum speed is 20 seconds per circle & the minimum speed is 68 seconds per circle)

The knob and switch

1. The knob on the side of the turntable can adjust the speed, and the speed range is 20-68 sec/rev.
2. The red switch has two arrows to control the left and right directions.
3. The switch is off when it is flat.

How to use?

• Put the turntable at an appropriate place where you are going to display your product, you may need to consider the lights, settings, etc.
• Plug in, then turn on the switch to check if the turntable can rotate well.
• Put the product on the turntable, choose an appropriate rotation mode, adjust the speed and rotation direction then you can start making a video.

Where can it be used?

• Product display, like jewelry, digital product, shampoo, glass and other collectibles.
• Product photography, still life photography
• Making Pannoramic Images, which are widely used in E- Commerce Platform.
• Can also be used to create 360 Degree Videos
• Ideal for Exhibition, Event, Party, Wedding
• 3D scanning

About ComXim

• ComXim is specialized in intelligent hardware, software development and Internet services.
• We focus on providing intelligent and information-based fittings and peripherals in the areas of 3D images, 3D scanning, 3D modeling, and 3D printing.
• demand-oriented, with the rapid development of science and technology, ComXim always stands in the forefront of intelligent and information-based world.
• With the accumulation of technical experience for many years, we have launched new products which support USB, WIFI, Bluetooth, serial port and remote control, also support secondary development.
• These new products could be applied to the market of 3D scanning, 360degree photography and 3D modeling.

Product description

The Christmas tree stand is designed with the spirit of Christmas in mind. Besides its reliability, it’s also a piece of art for your home. The colorful reindeer style will be as attractive as your Xmas tree. Living Tree Care Tips Prefer a living Christmas tree? Want to keep it alive for the whole holiday? That’s easy and achievable! Here are 2 tips for you: 1. To compensate for the water lost during transportation, water your tree with warm water for the first time. It will promote its sap flow while adding moisture to the branches and needles. 2. Add fresh water twice a day to make sure your Christmas tree has enough water to survive for the whole holiday and beyond.

• Unique Reindeer Style. Lively gold reindeers run on the stand, bringing the true Christmas atmosphere into your home. Match made in heaven with your tree decorations.
• Durable Material. Crafted with durable diecast iron, the tree stand comes with high stability and strength.
• Support Live Trees. With a deep reservoir for watering, it supports a live Xmas tree, keeping the tree green of the needles alive throughout the holidays.
• Easy to Use. Our tree stand is ready to use right out of the box with no assembly needed. Three supporting pegs help stabilize the trunk.
• Suitable for all Tree Sizes. With adjustable screws, it supports a 12' tree. For live trees, we suggest to leave some access space for watering.

Product description

Goliath welded steel Christmas Tree Stand For Live Trees 5 to 12 Foot, 7 inch max Trunk size, 28 inch Leg Span, .9 gallon water capacity, 4 steel support screws with steel end caps, Powder Coated Steel, Lifetime Warranty. Tired of your Christmas Tree falling over and Breaking your priceless family Christmas Tree Ornaments? Don't settle for a weak undersized plastic Christmas Tree Stand. Buy a GOLIATH Christmas Tree Stand! Made from heavy duty powder coated steel and backed by a lifetime warranty, GOLIATH Tree Stands are truly the last Christmas Tree Stand you will every buy! BUY WITH CONFIDENCE: Goliath Products LLC is a USA-based family owned and operated business established 4 years ago after spending 15 years in the Christmas tree stand industry, we knew we could manufacture better, stronger, tree stands that will last a lifetime. Our friendly USA customer service staff will assist with product and parts questions, and you won’t have to search all over the internet or Amazon for help. Our customer service phone number, and email address is clearly printed on the retail carton and the instruction sheet.

• For Live Trees 5 to 12 Foot
• 7 inch max Trunk size, 28 inch Leg Span, Legs Remove For Easy Storage
• .9 gallon water capacity, 4 steel support screws with steel end caps
• Powder Coated Heavy Duty Steel
• Lifetime Warranty

User questions & answers

Question:	Would this be good for outdoor use
Answer:	I'm not sure as was a donation for my church ... believe that is battery operated
Question:	can this be used with an artificial tree with 2" diameter pole
Answer:	The tree is packed away and I don't remember battery size for sure. I'm thinking AA's though. I don't remember battery pack being large or heavy. You could leave out, but you'd see the unlit lights. It would be pretty with just the lights and no decorations.
Question:	What's the smallest size diameter tree it will take
Answer:	The tree I received has only basic lights. No holly leaves. No red berries. I supplemented with an additional set of lights, as - for me - what was provided did not give enough coverage.
Question:	What’s the diameter of the base? 28 inches total
Answer:	I think the box was 24 inches tall and about 12 inches wide. Hope that helps.

• 【 Large Hole Size 】For use with less than 10.83' tall artificial tree with 3.2cm/1.26" dia center pole.
• 【 Bottom Length 】50cm/ 19.7".
• 【 Accessories 】Three thumb screws included for tightening the tree.
• 【 Foldable 】4 Legs fold flat for storage.
• 【Material 】Made of the high quality metal.

User questions & answers

Question:	Will this fit a pole that is 1.09 inches in diameter
Answer:	2.1 inches
Question:	Base dimension is 19.6” but pic shows 21.65” which one is correct
Answer:	This tree stand is for artificial trees and will hold a maximum of a 2 inch diameter pole. The tree stand hole measures 2.1 inches.
Question:	What is the actual weight? If made of iron, how can it only weigh 10.6 oz
Answer:	Hello! It is made out of green high impact polyproplyene (plastic).

Product description

La fete High Quality Xmas Tree Metal Stand



  Features and Benefits



4 Legs fold flat for easy storage.



Our bottom length is 23.6", is much bigger than the normal size in market(19.7”)



Made of high quality metal with sturdy steel construction, three fix screw included, easy to install.





Specifications



Color: Green



Main material: Metal



Bottom Length: 23.6"



Suitable for 7-8ft Christmas Tree with pole dia less than 3.2CM/1.6”





Box Content



1 x Metal Christmas Tree Stand

3 x Fix screw





Method of Use



1. Expand the shelf into a cross shape.



2. Then install the screws in the upper open hole.



3. Note that the screws should not be inserted too deep, otherwise the tree tube will not be inserted.



4. Insert the Xmas tree, then fix the screws tightly.





About La fete



La fete is a professional manufacturer producing and offering various of creative and environment-friendly products. If for any reason you are unhappy with any product by La fete, please do not hesitate to contact us.

• ✴✴【High Quality】 - Metal Holder Base Cast Iron Stand, sturdy steel construction. It will not be easy to deform, can be used for a long time and keep hard.
• ✴✴【Multifunctional】 - This stand fit for 7-8ft National Artificial Tree with pole dia less than 3.2CM/1.6”. Also can be used to hold a variety of pole items, such as Christmas trees, flagpoles, balloon poles, etc.
• ✴✴【Sizes & Package】 - Expanded Sizes approx 23.6 inches, 1 metal iron shelf and 3 thumb screws included.
• ✴✴【Easy Assemble】 - Expand the shelf into a cross shape, then install the screws in the upper open hole, the screws should not be inserted too deep, otherwise the tree tube will not be inserted, insert the tree, and fix the screws tightly. So easy to assemble.
• ✴✴【Satisfactory Service】 - All products come with our 100% satisfaction guarantee. Instructions and assembly tools included. If you have any questions, you can contact our customer directly, we will provide you with special guidance for 24 hours.

User questions & answers

Question:	How many tips does this tree have
Answer:	According to the box, the largest diameter is 1.25"