9 best safe accessories

• 75 LUMENS - Super bright, long lasting LEDs. Perfect for gun safes
• MOTION SENSOR AND ON/OFF TAP LENS – Motion sensor automatically turns light ON. Light turns OFF after 60 seconds of no motion. Detects motion up to 10 feet away. Tap the lens to turn the light on or off
• MOUNTING BRACKET – Detachable mounting bracket allows the light to be removed easily. The mounting bracket enables the light to rotate so you can position the light where is it needed
• INSTALL IN MINUTES – Mount with screws, hook and loop strips or adhesive backed magnets (all are included)
• 70 HOUR BATTERY RUN TIME - Operates on 3 AA batteries per light (not included). The batteries will power the light for more than 1 year based on normal use

• An accordion design,fits for glock 17, 19, 22, 23, H&K USP 9/40, H&K VP9 and more.
• Overall Size:4.5" L x 6.3" W , made of 1680D waterproof Oxford fabric.
• Good idea to move your mag from the shelf, be attached to your door panel. Both carpeted and non-carpeted door.
• The accompanying melt adhesive makes you more funny that can stick to a variety of solid surface.
• Perfect combination with our RAYMACE pistol holster.

User questions & answers

Question:	Is this a two pack on the triple pouch
Answer:	This is a dual tank. If you are looking for single tank, please see ASIN: B00J8E39DYProduct Link: http://www.amazon.com/dp/B00J8E39DY
Question:	The description says “heat adhesive”, but there are no instructions with the product on how to apply. Am I supposed to heat it up when applied
Answer:	Use a cleaning spray.

• Save Space for The Gun Safe：This pistol rack organizes handguns below the shelf, freeing up storage space above the shelf. Which keeps your pistols more organized and easy access in your safe.
• Suitable for Most Pistols：Design for most handguns, fits for handgun barrels which is .22 caliber or larger, and adapt for shelves which are 5/8" - 1" thick and not less than 9" Deep.
• Superior Gun Rack: Made of high-quality steel with vinyl coated.which are strong enough to hold a fully loaded pistols and not sag. The vinyl coating will not scratch gun barrels or rust.
• Easy to Install. Push the handgun hanger into the shelf，and plug the handgun’s barrel into the hanger. Easy for store the pistols in gun safe, cabinet shelf and in the car.
• Economical. 10 Pack of sturdy vinyl coated metal pistol hangers . Can easily fit up to ten semi-auto pistols in each compartment of your gun safe.

User questions & answers

Question:	How they fit inside gun safe
Answer:	Yes. * 2x Stainless Steel Baskets
Question:	Will this harm or scratch the barrel
Answer:	Dual Tank Capacity: 12L (6L for each tank) *Yes, they have to be dumped when changing the oil. There are no drains in the tanks.

Product features

Adoreal 10 Pack Pistol Rack

Adoreal 10 pack handgun rack are use to organize and better use space.

This definitely keeps everything in tidy order and expand its capacity about twice.

Suitable for Most Pistols

Design for most handguns, fits for handgun barrels which is .22 caliber or larger, and adapt for shelves which are 5/8" - 1" thick and not less than 9" Deep.

Superior Gun Rack

This gun rack is strong enough to support handgun and is amply coated to prevent scratching.

Save Space for The Gun Safe

This pistol rack organizes handguns below the shelf, freeing up storage space above the shelf.

Please Note

1. Allow room for length of gun and ensure door will shut when using this product.
2. You have to be careful when you slide the barrel of the handgun over the hook rail and when you pull the gun off the hook rail that you don’t disturb the guns hanging next to it.
3. Firearms should be kept out of reach of children.
4. Do not mount a loaded weapon.

• Hornady Silica Gel Dehumidifier Canister - protect your firearms, gun accessories, ammo and more from excess moisture, rust, and corrosion by keeping these reusable gun safe dehumidifier cans handy
• Keep Your Gun Safe Moisture and Rust-Free - portable dehumidifier with highly absorbent silica gel to attract excess humidity from its surroundings. This Hornady dehumidifier is crucial in maintaining the overall condition and shape of your guns
• Compact, Easy to Use - ready to use gun safe dehumidifiers with no batteries or electrical equipment required. It easily recharges in a warm oven for infinite reuse. Measures: 4 inches H x 5.3 inches W x 4.8 inches D Desiccant: 750g Effective Volume: 50 cubic feet
• Humidity Indicator - ideal moisture absorbers for safes with desiccant crystals that change from blue to pink when it's time to recharge each desiccant dehumidifier unit. Simply recharge each canister by placing it in a 300-degree F oven until silica gel canister turns blue (up to 4 hours)
• Gun Safe Accessories for Your Lifestyle - further protect and preserve your firearms as they are being stored with this efficient Hornady Safe storage dehumidifier. Optimal for all of your small spaces including gun safes, gun locker, rifle safe, hard case, gun bag, closets, cabinets, cars, RVs, boats, and more

User questions & answers

Question:	Do you put the whole canister in the oven to dry it out and "recharge" it
Answer:	We use about 2 Mazola canola oil bottles: 96 FL.OZ - 3 QT. - 2.84 L
Question:	Roughly how long before it requires recharging? And how many for a 42 gun safe
Answer:	It is good quality and perfect for frying
Question:	How many grams of desiccant are there
Answer:	Approved
Question:	What's the exact dimension? The production description says 1x1x1, but I find that awfully small
Answer:	This Listing also includes: 2x Stainless Steel Lid Covers The lids will act as both splash guards & covers, but do not overfill the bin or let the oil boil over. It's not sealed.

Product description

Packing List:

* Magazine Holder 2 pack

*12 pcs of screws

• Dimension: 10*3 inch. 0.13" thickness. 2 pack( screws included)
• Perfect mount on safe, cabinet, bed side, desk, office, and where needed. As long as it is the surface of wood, plastic, metal or other screw-able surfaces.
• Simply apply the included self-adhesive backing or mount the screws to the desired location .
• Soft Rubber Surface will not scratch or damage your magazines when they are in touch.
• Tips: will not hold stainless steel mags or any other non-metallic magazine.

• UNIQUE PATENTED DESIGN: Mount screwless against any metal surface thanks to 3 strong magnets on the backside. Or use the flushed screw holes for any other surface. Efficiently store almost any type & brand of metal magazines and clips on the same rack.
• PREMIUM QUALITY: Durable high quality design, made to last. Powerful neodymium magnets will firmly hold your firearm magazines. Strong enough to hold up to 7 loaded or unloaded metal clips or magazines.
• ANTI-SCRATCH COVER: Our elegantly designed cover is made from durable high quality materials creating a soft coating that will protect your magazines from any scratches.
• SLEEK PROFILE: Our 8.7" x 3.1" x 0.3" design allows for an unobtrusive mount and a perfect fit for any location. Created in the same style and quality as our KEEPER MG Magnetic Gun Mount.
• COMPATIBLE WITH MOST BRANDS & MODELS : Smith & Wesson, Ruger, Springfield, Sig Sauer, Glock, Colt, Kel Tec, Heckler & Koch, Browning, Walther, Taurus, Remington, Winchester, Mossberg, Beretta, Rossi, FN herstal, Magnum, Kel-Tec, Blackhawk...

User questions & answers

Question:	Does this really hold fully loaded pmag gen2/3 30 round .223 magazines? how about fully loaded pmag 25 round .308 magazines? long and short edges
Answer:	No it will not as they are vinyl coated with vinyl end caps. I would suggest that the end cap be removed on the barrel end. ,22 pistol will need end cap removed. I would caution you to removel all "barrel end only" caps as they pull off when you pull the gun out of the rack as the end cap wants to stay in the barrel and you will not want to fire pistol with a cap in the barrel. To be honest this is a law suit waiting to happen! Results could be very bad for you or anyone else. My advice is to take the caps off the barrel end. Other than that they are fantastic and worked extremely well for the price. I was not disapointed one bit!
Question:	How safe is it having magnatized magazine and bullets
Answer:	It is a two pack of pouches with each pouch having two sleeves. Each sleeve will hold one to three mags depending on size
Question:	Anyone know what the plastic shim is for
Answer:	Just use the adhesive tape on back to stick it to the surface you want !
Question:	Looking for a Ruger.223 rifle clip
Answer:	Its good for small amounts.

Product description

---We at keh controls are a family owned american gun loving company, we are a family who loves to hunt and fish and outdoors

---Our lighting kit does not need ambient lighting(use sun setting for safes)

---The kit includes velcro pieces of hook side style velcro to work with carpeted safes

---We just upgraded the 3m sticky on the led strip itself to work with non carpet safes

---Lighting kit may need slight work on some safes to really be secured inside safe

---Please understand unless your a gun loving american it could take a few minutes  

---To make stick well to your particular safe, aka hot glue gun

---The included hook side of velcro type is used to stick to the 3m on the led strip

---Then measure out center to get most light coverage

---Place pir motion sensor as shown in pics below of our many satisfied customers

---Make sure one side of the motion sensor is built up slightly to face safe door

---May take some good old american fabrication for some safes to work to its peak 

---Adjust sensor for best motion sensor results

---Try using just the 3m first and use the hook side velcro style if needed

--- Most safes will only need hook style vecro across the top

---The 12ft led strip is the longest available on amazon that will run off batteries

---Uses 4aaa batteries and will last months for most owners

---If for any reason you arent 100% satisfied with the product please contact us 

---Tips or ideas we need to correct please also contact me.  

---Our family wants to offer the best quality light at an affordable price

 

Please note we use the best 3m available at this time. Have seen some american gun lovers use a few dabs of super glue to make the led stick well. A nice light will allow you to skin that smoke wagon much faster.

• Installs in minutes May need a little super glue on some safes. Decided to put together a nice affordable kit after buying all the parts to make my own off amazon and it cost me 29 bucks and still sucked with only a 3ft led light Please check light for function when received before installing. If you break the led installing no worries just contact me through amazon and ill ship out replacement asap. The led are the best we can find but can still break when bending around corners sometimes.
• Please make sure if changed switch from sun to moon you unplug the light after the switch is made and plug led back in. Bright 6500k 12ft white/blue light, cool affordable safe lighting. Adjustable time on dial. I test every light in my living room and set up for the gun light. The setting must be on the sun setting for safes. I have them ready to be used upon arrival. Don’t mess with anything except putting batteries in it and verify the light turns off without motion. Then you are ready
• Discreet blueish light allows for safe lighting without calling attention to where you are in case of a intruder . Please understand it runs off batteries not a nuclear reactor so please don’t put me on blast about not being bright enough. If you want Jesus sunlight this kit isn’t for you. Please note if you get a battery in wrong it will light the lights but be very dim so please check batteries. I sit in my living room floor and hand check every single light for light and motion

User questions & answers

Question:	Are these made in America
Answer:	It all depends on the size of the area you are trying to control the humidity in, and how high the humidity is in that area. There can’t be a “one size fits all” guess. I use mine in a 1.8cu. ft safe and in needs recharged after 1.5-2 weeks in the summer, less often in winter here in PA.
Question:	How can I order another 12 ft light strip
Answer:	Not sure quart size can
Question:	I just got mine and they are great but my only question is, what’s the point of the button you push
Answer:	Yes Amazons description says 1x1x1, however in the From the manufacturer section under the large Hornady logo you will find: Specifications: Effective Volume: 50 cubic feet Dimensions: 5.5" l x 5" w x 4.3" h 2.1 pounds
Question:	Hi keh controls , this item is great but mine for some reason after a day or 2 a couple of lights stopped working. what should i do to fix it
Answer:	If you have a shelf at least half inch thick they work fine. If thinner could use foam or something to make thicker. I use them on my shelves and they work great!

Product description

Savior Equipment Pistol Rack Firearm Gun Safe Storage Organizer



What's Included

1 x Pistol Rack of Your Choice

Tools & Hardware



Product Features



4/8 Slot Pistol Rack

Storing and transporting your pistols around the home just got much more convenient. This solid and sturdy pistol rack makes moving your collection to the workbench a breeze.



All-Inclusive

Designed to fit a wide range of pistols and revolvers with its spacious individual slots, this rack can accommodate different accessories you may have.



Long Barrel Love

No longer worry about storing your long-barreled pistols and revolvers. This rack is specifically constructed to hold whatever barrel lengths you throw at it.



Structurally Sound

Lightweight polymer plates and cushioned foam fixed between 2 powder-coated steel plates make this rack tough and durable; perfect protection for all your pistols.



Simply Designed

This pistol rack can be assembled quickly without additional tools and is easy to put together right out of the box with the included assembly guide.

Technical Specifications



4-Slot Pistol Rack Size | 25" W x 3.5" H x 8"

4-Slot Pistol Rack Width | 16.5"



8-Slot Pistol Rack Size | 25.5" x 6" x 14.25"

8-Slot Pistol Rack Width | 16.5"



Slot Width(each) | 2"

Case Material

Powder-Coated Steel Plates

Lightweight Polymer Plates

Cushioned Foam

• [Built Tough to Protect] - Outer Steel Plates & Heavy Duty Rod to Hold The Rack In Place. Store and Transport Your Pistols Made Easy.
• [One Rack Fit All] - Most of the Large Barreled Revolvers or Pistols with Accessories Will Fit in This Rack without Any Issues.
• [Treasure Your Pistols] - Lightweight Polymer Plates to Keep Pistols from Banging Each Others. Cushioned Foam to Sit Them Steadily in Place.
• [Real Simple to Assemble] - No Tools Needed. Assembly Guide Included in Box. Rack Can Be Assembled in Less Than 5 Minutes
• [Purchase with Confidence] - Savior Unquestioned Lifetime-Warranty. Love It or Return It.

User questions & answers

Question:	Can the 8 slot be assembled as a 6 slot (or just a shorter version)? I don’t have space for the 8 slight but would like more than the 4 slot
Answer:	I have three mags loaded on the backside of my fingerprint .40 Cal. 3 1/2w pistol safe mounted to leg of my desk leg for quick access if needed. they have never fell off from movement etc. I have five GrandChildren and Safety is first weather I am home or gone for days at a time. Good Luck and never leave a gun out if not loaded or loaded, it's your responsibility.
Question:	Where do you store this safe? Is it meant to attach to some other safe
Answer:	Its to wedge it in between the magnet and the surface the magnet is attached to incase it is too difficult to pull the magnet by hand strength alone.
Question:	Can this be mounted to a wall
Answer:	You will have better luck looking for a Ruger mag instead of a clip.
Question:	Where do you store this safe? Is it meant to attach to some other safe
Answer:	Yes, the instructions are on the top of the canister. Use oven mitts when it’s re-charged.

• Maximize Storage in Your Safe - instantly add storage and organization to your existing shelves and take advantage of unused space with this SnapSafe Hanging Shelf Large Basket (76011). The coated wire basket protects shelving and the contents from damage
• Easy to Install Under Shelf Storage - with no tools required, simply slide the under shelf basket onto your safe's shelf and get instant space. The storage basket slides onto a 0.5 in. to 1 in. thick shelves and holds up to 40 pounds. Dimensions: 11.75 inches W x 7.5 inches H x 9 inches D Weighs: 2.36 pounds
• Sliding Basket Organizer, Large - this removable large basket is a great way to holds and organize anything conveniently under a shelf. Keep your important belongings in its very own place so it's easy to locate and prevent damage
• Quick Access Gun Safe Organizer - these sliding wire baskets make a great addition to your locker shelf. Organize items such as shooting supplies, cleaning supplies, ammunition and more so you can quickly reach for it when you are in a rush
• Gun Safe Accessories for Your Lifestyle - complement and maximize the space in your gun safes & cabinets with this removable black wire basket by SnapSafe. Your items are now easy to reach, put away, and visible for less digging

User questions & answers

Question:	What size is this
Answer:	Message me through amazon. Click my seller name and I’ll send you a new led for free.
Question:	What is the measurements of the Document rack
Answer:	Haven’t installed mine, maybe to keep it on all the time.
Question:	What size is this
Answer:	Well, mine stopped working as well. I see you say to contact customer support buy, you are the sales point of contact for a customer, correct? Would you be able to send a new one and I could return the one that don't work and you could contact customer support?
Question:	How thick of a shelf can this accommodate? My desk is 1.5" -- will this work
Answer:	It might, but I use the mounted holder with extended arms, forming slots for my AR magazines (they still out from the wall, as opposed to laying flat along the wall). For this one, I would stick with pistol magazines (for which it’s perfect)