12 best kegerator cleaning kits

Product description

Introducing the Kegco Deluxe hand pump pressurized cleaning kit. No longer do you have to remove the faucet with this kit. You just unscrew the DRAFT beer line off of the keg coupler and screw this directly to the cleaning kit. Includes a high pressure hand pump cleaning bottle and a 32 oz. Bottle of BLC draft beer line cleaner and nylon beer faucet brush.

• No need to remove your faucet, connects directly to your beer line!
• 1/2 gallon High pressure Cleaning bottle
• 32 oz. Alkaline beer line cleaning solution
• Pressurizes from the bottom up so you can clean the faucet also
• Home Brew kits and accessories

User questions & answers

Question:	Does this work for a euro slider system
Answer:	Hello, Yes, this connects into the beer line fitting, which is standard on industry couplers. Anthony
Question:	Bottle is not getting pressurized any solution or just return it
Answer:	Usually when we hear of this issue, it is because the siphon tube was not installed correctly so the air that you pump into the container just goes up the tube instead of pushing liquid through the tube. You can find setup instructions here: https://www.beveragefactory.com/images/guides/Pressurized%20Cleaning%20Kit%20Manual%20-%20low%20res%20V2.pdf If that is not your issue, please give our customer service a call at 888-980-4810 so that we may troubleshoot your issue.
Question:	Is this product dishwasher safe
Answer:	Not sure. But you only should be using it to clean out the beer line. The last use is clear water so it should only need to be rinsed.
Question:	does this work with 5 gal ball lock kegs
Answer:	Hi ikki79,Thank you for your question. In order for this cleaning kit to work with a 5 gallon ball lock keg you will need a 3/16 splicer, or you can use the empty keg as the cleaning vessel once you are done brewing. If you have any further questions, please feel free to contact our beer experts at 800-710-9939 option 1.Regards,StevieBeverage Factory800-710-9939

Product features

Cleaning your lines is an important step in dispensing great tasting draft beer

Beer lines require periodic cleaning because beer leaves behind yeast, protein, and mineral deposits that can affect the taste and smell of your beer. Mold can also find its way into your draft beer system fittings through exposure to air. If left untended, these factors can create a scale called calcium oxalate, commonly referred to as beer stone. If it is not completely removed in a cleaning process, it will leave an unsanitary surface that can harbor microorganisms which grow very quickly and affect the flavor and shelf life of your beer.

Lines should be cleaned on a regular basis to prevent stone build-up. We recommend that you clean your lines about every 6 weeks or every time you switch out a keg. Commercial applications require more frequent cleaning, depending on the beer system length. Systems less than 25' in length require bi-monthly cleaning, while longer systems should be cleaned following brewery recommendations and/or state guidelines.

Connects in seconds

Our connection attaches directly to the beer line, allowing you to pump the solution forward through the line and eliminating the need to detach the faucet to clean the system.

Powerful pressure

The hand pump on this kit provides powerful pressure that is sufficient for longer draws and cooling coils, and more than enough for shorter residential applications.

Includes faucet brush

Let the faucet soak in the cleaning solution and then use the provided faucet brush to scrub any particles off the surface for a deep clean, right to the tap!

Includes 32 oz. Beer Line Cleaner

Only chemicals specifically designed for beer line cleaning will dissolve the build-up of beer stone, bacteria, mold, and yeast without leaving behind any harmful residue.

Product description

Keep your beer tasting brewery fresh with the this kegerator cleaning kit. This Kit works by removing buildups of bacteria, molds, yeast, and beer stone from your beer lines, faucet, and keg coupler. The Kit comes with a one quart shatter proof bottle and enough beer line cleaning compound for about 17 cleanings. The 5/8" Nylon Faucet Brush can clean the toughest buildups in your coupler and faucet. The Check Ball Lifter inserts into the bottom of the coupler probe and lifts the check ball, permitting cleaning solution to flow through the coupler when cleaning your system. This saves time by eliminating the need to remove the coupler while cleaning the system. The kit even comes with an extra neoprene washer and faucet wrench in case you lose your originals. A handy instruction manual walks you through the cleaning process and in as little as 15 minutes, you will have a sanitized kegerator, providing you with beer tasting brewery fresh.

• 1 quart shatter-proof bottle
• Check ball lifter
• Neoprene washer
• NSF approved

User questions & answers

Question:	I have a problem with the hose from the cleaning bottle not setting correctly to the faucet shank. It leaks all around the connection. Anyone else
Answer:	Ive not had that problem. Try plumbers tape.
Question:	How many cleans can you get out of this kit
Answer:	I've gotten at least 8 to 10 cleanings it is a good product
Question:	Will it work on a Danby kegerator
Answer:	Yes.
Question:	Does this bottle squeeze to pump the solution thru
Answer:	All you do is connect and invert the bottle. It will run through on it's own. Simple kit, gets the job done.

Product description

This Kegconnection Beer Line Cleaning Kit comes with a detailed, illustrated, and easy to use instruction sheet. Also, check out our video section for a step by step instructional clip showing how easy it is to use this kit. Featuring 8 ounces of Brew Clean, which is a safe and easy powdered form cleaner, made right here in the USA. The empty plastic bottle is marked in both ounces and ML. The ball lifter is used for holding the check valve ball on the beer coupler/tap open so liquid can pass through, (no need to remove like most other cleaning kits). The metal faucet wrench allows easy removal and replacement of your faucet from a tower system or refrigerator shank. The faucet brush helps clean the faucet spout each time the plug/brush is inserted and removed. Kit assembled in the USA.

• INCLUDED WITH KIT: An easy to use instruction sheet. Featuring 8 ounces of Brew Clean powder cleaning solution. 1 plastic bottle to mix the cleaning solution, gently squeeze the bottle to prevent leakage. 1 ball lifter for holding the check valve open on your beer coupler. 1 metal faucet wrench to loosen and tighten your faucet for an all-around cleaning experience. 1 faucet brush for those tough spots. 1 connection hose to connect the cleaning line directly to the tower or standard shank.
• EASIEST KIT ON THE MARKET: This all-in-one cleaning kit includes everything you need to clean stainless steel, Cornelius, Firestone style kegs, liquid/beer lines and other glass, plastic or rubber homebrew equipment.
• SAFE TO USE: The 8 ounces of Brew Clean solution is a safe and easy to use powder solution. It will not cause rust on kegs/ homebrew equipment. This formula actually helps protect metal from corrosion. Only 1 tablespoon of the Brew Clean solution is needed for each cleaning (enough to do about 20 cleanings).
• MONEY-BACK GUARANTEE: This kit is backed by 100% guarantee that you are fully satisfied with your product or receive your money back.
• ASSEMBLED IN THE USA: This kit is assembled in the USA.

User questions & answers

Question:	Will this work with a ball lock
Answer:	Hi John, This cleaning kit is made to clean the liquid side of tower kit or the shank connection at the connection for the faucet(not the plastic party faucet). Just remove the faucet and connection to your keg. If you are using the ball lock or pin lock disconnects you will need to remove them. Hope you find this helpful.Tommy GAmazon Specialist at Kegconnection
Question:	I bought this and the threads on the end of the hose aren't deep enough to thread into the female part of the tower where I removed the faucet. Ideas
Answer:	Hello, We test this item many times then we changed the connection to plastic and it worked in every case. One inserted into tower shank it worked just as the other with no problem. We sell thousands and thousands of these and have had only one customer that received one that was to large to fit their tower shank, and sent a replacement out asap to correct the issue. These work on standard and stainless steel tower shanks we tested them on. I have nor heard of any cross threading as of yet so I really do not know how yours is not working. Please feel free to contact us here at Kegconnection at325-356-5204 and we would be glad to see what's going on with the one you have. Thanks for asking.Tommy GAmazon Specialist at Kegconnection
Question:	Does the hose have/need a washer
Answer:	No, everything you need is included in the kit. Tommy G Amazon Specialist at Kegconnection
Question:	Is there a video showing how this works
Answer:	Hi Jason, Try this https://www.youtube.com/watch?v=arg1brDIhTM let me know what you think...Tommy GAmazon Specialist at Kegconnection

• Includes 1 quart bottle, hose assembly and o-ring, faucet wrench and brush, ball lifter, and powder cleaning compound.
• Includes step-by-step cleaning instructions for your draft beer lines with pictures showing proper use of the kit.
• Kit is gravity feed so there is no need for pumps or additional supplies, hose assembly fits all standard draft towers.
• Quality seal materials and design prevent leaking problems that occur with some other beer line cleaning kits.
• 100% money back guarantee. If you are not completely satisfied we will refund or replace your kit, no questions asked!

User questions & answers

Question:	Do you need separate sanitizer
Answer:	No, there is a bag of sanitizer in the kit. It goes a long way.
Question:	How many ounces of the powder is there
Answer:	The kit comes with 1/2 lb of cleaning powder, enough for about 17 cleanings.
Question:	How many cleanings do you get from this kit
Answer:	I made about 4 liters of solution. I have about 3/4 of the powder left. I believe i can easily use this product about 5 times to clean my keg.

Product description

The cleaner and sterilizer is ideal for quick and easy cleaning of direct draw systems. Includes a one quart shatter proof plastic jar, pump, and faucet coupler cleaning attachment. Complete kit includes a faucet brush, faucet wrench, 2 oz. tap cleaner and instructions.

• 1 qt. Cleaning Kit
• 1 qt. Shatter Proof Plastic Jar
• 4 0.5 oz. Packets of Alkaline Beer Line Cleaning Solution
• 1 Faucet Wrench
• 1 Faucet Brush

User questions & answers

Question:	Does this unit only require disconnecting the keg connector, unscrewing the beer line from the keg connector and opening the tap
Answer:	Hello, This kit cleans through the faucet connection to the shank, so the faucet must be removed. Anthony
Question:	What is the size of the coupler, I seem to have misplaced mine
Answer:	If you are referring to the fitting on the end of the tube that connects to the faucet shank, it is 1-1/8" with 18 threads, which is the U.S. Beer Industry Standard. If you need a replacement part for this kit, you can contact us at 1-888-980-4810.
Question:	Do i need to disconnect my faucet and handle to use this or does it just replace where the keg would go? also is co2 turned off or used to flush
Answer:	Yes, you need to disconnect the faucet (relatively simple) to use the product. You do not need your cO2 on to use this. The pump handle does the work.
Question:	i have a us sanky keg and the female(screw in part on the cleaning pump) part is too small...HELP
Answer:	The connector is a standard size; where are you connecting the female end? Are you removing the faucet on the tower and connecting the pump there? If it doesn't fit contact the seller of the cleaning kit.

Product features

Cleaning your lines is an important step in dispensing great tasting draft beer

Beer lines require periodic cleaning because beer leaves behind yeast, protein, and mineral deposits that can affect the taste and smell of your beer. Mold can also find its way into your draft system fittings through exposure to air. If left untended, these factors can create a scale called calcium oxalate, commonly referred to as beer stone. If it is not completely removed in a cleaning process, it will leave an unsanitary surface that can harbor microorganisms which grow very quickly and affect the flavor and shelf life of your beer.

Lines should be cleaned on a regular basis to prevent beer stone build-up. We recommend that you clean your lines about every 6 weeks or every time you switch out a keg. Commercial applications require more frequent cleaning, depending on the beer system length. Systems less than 25' in length require bi-monthly cleaning, while longer systems should be cleaned following brewery recommendations and/or state guidelines.

Mix solution

Remove the cap and the pump on the cleaning bottle. Dissolve one 0.5 oz. pouch of beer line cleaner into 1 quart of water, and then reassemble.

Disconnect faucet

Remove the faucet from the shank using the included faucet wrench. You can soak the faucet in some of the cleaning solution for several minutes, and then scrub with the included faucet brush if needed. Thoroughly rinse the faucet under fresh water with the faucet in the open position.

Attach line to faucet shank

Connect the attachment on the end of the cleaning kit line to the shank coupling nut, tightening slightly with the wrench.

Pump solution through line

Use the pump on the lid of the cleaning bottle to push the beer line cleaning solution through the dispense system.

Allow solution to empty into bucket

Place the end of the beer line hose into a bucket so that you can easily dispose of the cleaning solution once it has run through the dispense system.

Clean again and again and again!

The kit comes with 4 packets of no rinse cleaner, enough for 4 cleanings. We recommend cleaning your lines every 6 weeks or whenever you change your kegs.

Product description

Kegconnection Beer Line Cleaning Kit comes with a detailed, illustrated, and easy to use instruction sheet. Info on assistance is included on instruction sheet should you need it. Featuring 8 ounces of Brew Clean, a safe and easy powdered form cleaner, made in the USA. The empty plastic bottle is marked in both ounces and ML. The Ball Lifter is used for holding the check valve ball on the beer coupler (also called tap) open so liquid can pass through beer coupler (no need to remove like some cleaning kits). The German made CMBecker faucet adapter is used to connect the cleaning line directly to the tower or standard shank. The metal faucet wrench allows easy removal and replacement of your faucet from a tower system or refrigerator shank. The faucet brush helps clean the faucet spout each time the plug/brush is inserted and removed. Kit assembled in the USA.Gently Squeeze to prevent leakage.

• Brew Clean is a safe and easy powdered cleaner and made in the USA
• Beer Line Cleaning Kit Includes: A detailed and illustrated instruction sheet; 8 ounces of Brew Clean; 1 empty plastic bottle; 1 ball lifter; 1 CMBecker faucet adapter; 1 metal faucet wrench; and a faucet brush
• The empty plastic bottle is marked in both ounces and ML. The metal faucet wrench allows easy removal and replacement of your faucet from a tower system or refrigerator shank
• The German made CMBecker faucet adapter is used to connect the cleaning line directly to the tower or standard shank. The Ball Lifter is used for holding the check valve ball on the beer coupler (also called tap) open so liquid can pass through beer coupler (no need to remove like some cleaning kits). The faucet brush helps clean the faucet spout each time the plug/brush is inserted and removed
• Gently Squeeze to prevent leakage. Kit assembled in the USA.

User questions & answers

Question:	Will this work on pin lock kegs
Answer:	Hi Miles W,Thank you for your question. In theory, yes you could use this kit on pin lock kegs. You would need to attach it to the shank to run throughout the lines. However, for pin lock kegs it is easier to run a cleaning solution and run it through the keg and then follow up with running water through it. If you have further questions, feel free to contact our technical support at 800-710-9939 option 4. Regards,StevieBeverage Factory
Question:	Why did I not get a faucet wrench
Answer:	Hi Jon, If it was ordered from Kegconnection it should of had a faucet wrench so you can remove your faucet from the tower or fridge shank. If not in your packet please contact us using the order number from Amazon. We will kindly send you the missing part. Tommy G at Kegconnection
Question:	Mine did not have an O-ring, thus the solution leaks. Does anyone know what size it is
Answer:	We did not get one either, but after contacting the seller, they sent a few and they fit. Sorry, don't know definitely size, but you can also get them from local store.
Question:	What is the diameter of the stainless steel nut going to the kegerator
Answer:	I really wish I knew. I know it fits a "standard" kegerator without any issues. By standard, I mean ones that can hook up to a regular American keg of beer easily without any issues. I recently discovered, however, that with any European beers (we ordered a keg of Warsteiner), you need a special European tap in order to get to your beer. I hope I answered your question.

Product description

The Cleaner And Sterilizer Is Ideal For Quick And Easy Cleaning Of Direct Draw Systems. Includes A One Quart Shatter Proof Plastic Jar, Pump, And Faucet Coupler Cleaning Attachment. Complete Kit Includes A Faucet Brush, Faucet Wrench, 32 oz. Tap Cleaner And Instructions.

• One-quart shatter proof plastic jar with a hand-pump and faucet coupler cleaning attachment
• Faucet brush
• Heavy Duty Faucet Wrench
• 32 oz. bottle of Kegco Beer Line Cleaner
• The cleaner and sterilizer is ideal for quick and easy cleaning of direct draw systems

User questions & answers

Question:	My husband ordered this and it arrived this week- But came with no instructions on how to use. Can we please get a digital copy of instructions
Answer:	you disconnect the tap handle and faucet. connect the hose on the cleaning kit where the faucet was. You then pump the cleaning solution down through to clean the lines. hope this helps

Product description

Line Cleaning Tank: This cleaning tank easily attaches to your faucet shank(faucet removal is necessary with included faucet wrench) and used to pump cleaning solution through your lines. Tank can then be refilled with clean water to flush the lines. Can be used to clean kegerator lines or to clean jockey box lines. Cleaner, faucet brush, and faucet wrench are included. Tank Capacity: 1 gallon. Connects to standard american faucet thread shanks

• 1 Gallon High Pressure Cleaning Bottle (hand pump)
• 4oz Alkaline Beer Line Cleaning Solution Concentrate(makes 8 gallons of cleaner) )
• Includes Cleaning Tools (faucet wrench and faucet cleaning brush)
• Affordable and easy to use!

User questions & answers

Question:	is this product rated for food grade? I see a lot of these pump kits are garden sprayers converted which i dont think is safe for food grade lines
Answer:	As long as you follow the directions on the line cleaner and flush lines with water afterward, everything will be fine. As long as you don't store any cleaning solution inside it when not in use, everything will be fine. This is a cleaning tool, not a beer dispenser.
Question:	What type of keg coupler system is used with Stella beer
Answer:	The 1/6th barrel kegs use a D Coupler and the 1/2 barrel kegs use an S Coupler. This item will thread into the faucet shank on your kegerator, so it will not make a difference in which keg style you are using.

Product description

This heavy-duty, Stainless Steel, dual-head keg cleaning can is what you’ll wish you had the next time you realize your jockey box wasn’t properly cleaned after its last use. After you kick all your kegs from a successful event, Use this cleaning can (with your preferred cleaner, pushed through with the CO2 tank you already have) to easily and efficiently clean your jockey box's beverage lines before you pack up and head home. Trust us, The person on your team who has to use your jockey box next will thank you for it.

• Volume capacity: 4 gallon ( 15 liters)
• Stainless Steel construction
• Sankey D connections
• Pressure-relief valve
• Removable lid for easy filling
• Carrying handle
• 9.5" X 11" X 16"
• Included Components: Cleaning Keg Kit

Product description

Keep your system clean and working in tip-top shape using this Draft Beer and Kegerator Cleaning Kit (1842). Uncleaned systems allow for unsanitary growths and buildups of yeast, bacteria or other unseemly residues left behind by your beer. This kit allows you to quickly and easily maintain your lines by providing you with everything you'll need, including a Draft Beer booklet and step-by-step instructions. This cleaning kit includes: 1 qt. Cleaning Jar w/ Tubing FT585 Pump Spanner Wrench Ball Lifter Cleaning Brush Line Cleaning Powder (pblc)

Product description

No one wants to drink from dirty beer lines! Improve the taste of your beer by eliminating foam-causing debris and beer stone, before they have a chance to build up. The rule of thumb is to clean your lines after every keg. This beer line cleaning kit is a convenient pump assembly that makes it easy to clean your draft system. This kit includes: one gallon plastic jar and pump assembly, faucet wrench, faucet brush, 32 oz bottle of caustic beer line cleaning solution, and instructions.

• One Gallon Plastic Jug with Pump Assembly
• Faucet Brush
• Faucet Wrench
• 32 oz Caustic Beer Line Cleaner
• Instructions

Product description

Introducing the Kegco Deluxe Hand Pump Pressurized Cleaning Kit! This convenient kit helps save the life of your tower without requiring you to remove the faucet. Simply unscrew the beer line off of the keg coupler, and screw this directly to the cleaning kit. Includes a High Pressure Hand Pump Cleaning Bottle, a 32 oz Bottle of Kegco Beer Line Cleaner, and a Nylon Beer Faucet Brush.The 1/2 Gallon Cleaning Bottle holds plenty of cleaning solution for you to keep your draft beer lines clean. The 32 oz. bottle of biodegradable Kegco Beer Line Cleaner alkaline solution helps remove beer stone, biomass, organics and mineral deposits from beverage lines. Use the nylon faucet brush to keep your tap clean.

• Easy-to-use hand pump pressurized cleaning tank
• Does not require you to remove your faucet to clean your dispense system
• Connects directly to your beer line for fast and easy cleaning
• 32 oz. bottle of biodegradable Kegco Beer Line Cleaner alkaline solution keeps beverage lines clean
• Nylon faucet brush helps keep your tap clean

User questions & answers

Question:	Kegco gives you a mechanical thread and my coupler has a standard thread?? Should there be an adapter w/ the product
Answer:	Hello, Thank you for your question. The adaptor for this cleaning kit has a universal international beer thread. Best regards, Kaylyn Beverage Factory
Question:	The fitting seems different than a tap. Does this require anything additional to clean a kegerator hooked up to CO
Answer:	Hello, Thank you for your email. You do not need any additional parts and this hooks up to the beer line. Please let us know if we can be of more assistance. Best Wishes, Emmie Beverage Factory 800.710.9939
Question:	Is the plastic on the pump food grade
Answer:	It is used to pump line cleaner, disinfectant, through the beer lines and tap, I am not sure if it is food grade, I don't think it actually needs to be if it is used for it's intended purpose. I would assume that it is, but I am not positive. You will need to contact the manufacturer.
Question:	Is there an adapter for cornelius kegs?\
Answer:	There is not an adapter for cornelius kegs. What a lot of people will do is just mix cleaning solution in their cornelius keg and dispense it through the lines like they're pouring beer. Then run clean water through the keg and lines to rinse them. If you would like to purchase the cleaner separately, you can do so here: https://www.amazon.com/dp/B00IYE614S/

Product features

Cleaning your lines is an important step in dispensing great tasting draft beer

Beer lines require periodic cleaning because beer leaves behind yeast, protein and mineral deposits that can affect the taste and smell of your beer. Mold can also find it's way into your draft system fittings through exposure to air. If left untended, these factors can create a scale called calcium oxalate, commonly referred to as beer stone. If it is not completely removed in a cleaning process, it will leave an unsanitary surface that can harbor microorganisms which grow very quickly and affect the flavor and shelf life of your beer.

Lines should be cleaned on a regular basis to prevent beer stone build-up. We recommend that you clean your lines about every 6 weeks or every time you switch out a keg. Commercial applications require more frequent cleaning, depending on the beer system length. Systems less than 25' in length require bi-monthly cleaning, while longer systems should be cleaned following brewery recommendations and/or state guidelines.

Connects in seconds

Our connection attaches directly to the beer line, allowing you to pump the solution forward through the line and eliminating the need to detach the faucet to clean the system.

Powerful pressure

The hand pump on this kit provides powerful pressure that is sufficient for longer draws and cooling coils, and more than enough for shorter residential applications.

Includes faucet brush

Let the faucet soak in the cleaning solution and then use the provided faucet brush to scrub any particles off the surface for a deep clean, right to the tap!

Includes 32 oz. Beer Line Cleaner

Only chemicals specifically designed for beer line cleaning will dissolve the build-up of beer stone, bacteria, mold and yeast without leaving behind any harmful residue.