11 best home brewing system

Product description

The Grainfather Connect is made from high quality 304 grade stainless steel with an 8 gallon capacity, designed to make up to 6 gallons of beer from one brew.

ELECTRIC HEATING ELEMENT

The Grainfather is fitted with an electronic controlled heating element so that the correct power can be used depending on what stage of the brewing process you are at. A gentler heat is used at certain stages for accurate temperature control and and to minimize the risk of scorching and after the mash it can also ramp up the heat quickly for when more vigorous heating is required.

CONTROL BOX FOR HEAT AND POWER CONTROL:

Use the Connect Control Box in conjunction with the Connect App and Grainfather Brewing Community for the ultimate brewing experience. Create your recipes on the Grainfather Brewing Community and then sync these recipes with the Connect app. The control box has Bluetooth connection to your mobile device and Grainfather Connect App so it can be controlled remotely. This allows you to multitask or simply relax while brewing and then be alerted when to return to your next step. PUMP: A 6 Watt, 1,800 RPM magnetic powered pump has been fitted to recirculate the wort through the grain bed for maximum brewing efficiencies. This is also used during the cooling stage to pump hot wort through the wort chiller. The pump makes the cleaning process quick and easy by pumping the cleaning detergent through all the pipe work.

GRAIN BASKET:

A stainless steel expandable grain basket allows you to brew with anything from 9.9 lb - 20 lb of grain. COUNTER-FLOW

WORT CHILLER:

A counter-flow wort chiller reduces the chance of contamination

SUPPORT:

Our support team is here for any technical enquiries on brewing, how the Grainfather works, and general customer service enquiries.All Grainfathers come with a 24 month warranty.

PLEASE NOTE: All Grainfathers contain a yellow packaging strip in the boiler. This should be discarded before you begin brewing.

• SIMPLE AND USER FRIENDLY: The Grainfather is electrically powered and designed to be used indoors; No need for burners or hot plates; just plug in and go; Heating from mash to boil takes as little as 20 minutes; Instructions included; Instructional videos available on manufacturer website
• HIGHEST QUALITY CONSTRUCTION: The Grainfather is made from high quality 304 grade stainless steel with a 8 gallon capacity; designed to produce up to 6 gallons of beer from one brew
• INTUITIVE DESIGN: Programmable step mashing; delayed heating; waterproof digital display in Celsius and Fahrenheit
• INNOVATIVE FEATURES: Use the Connect Control Box in conjunction with the Connect App and Grainfather Brewing Community for the ultimate brewing experience; Bluetooth connectivity allows the Grainfather to be controlled remotely; Simply relax while brewing and then be alerted when to return to your next step
• FANTASTIC SUPPORT: The Grainfather is fully supported around the world by a fantastic support team who love brewing just as much as you do; Our support team is here for any technical inquiries on brewing or how the Grainfather works; as well as general customer service inquiries; 24 month manufacturers warranty

User questions & answers

Question:	Hello. Is possible to get a 240v version? Thank you
Answer:	Unfortunately the 240V version is not available in the US.
Question:	could you tell me the shiping size of the package
Answer:	The shipping dimensions are 29x19x17 at 45lbs.
Question:	Not considering the initial cost of buying this, but is it actually cheaper to make beer using this than buying it- if so by roughly how much
Answer:	Depending on the quantities of ingredients you buy, the price for making beer is about 20-25% of the cost compared to buying beer. Brewers make a lot of money but they also work very hard. You can call us to get an idea of the cost for ingredients. Thank you, Bridgeview Beer and Wine Supply
Question:	If I buy this what other equipment should I buy
Answer:	Depends on your level of homebrewing and if you have basic homebrew equipment. If so, I would personally recommend the Graincoat which helps insulate the GF kettle, maintain consistent temps and grts you up to temp/boil quicker. A hop spider is ideal if you are not using some other kind of hop sack/bag. It helps keep all of the fine pellet hops from circulation. The Grainfather sparge heater compliments the GF Connect. It keeps your sparge water at a consistent sparge temp. It will require another circuit in your home/brewing area if you are using the GF Connect at the same time. The new GF conical will be available this week which is an 8 gallon stainless steel fermenter with optional dual valve tap for sampling/yeast transfer, digital temperature controller and or basic cooling pump kit. Plenty of other brands available if you decide to venture outside of the GF lineup.

Product description

Brewer's Edge Mash & Boil with Pump All Grain Brewing System A simple and affordable way to start all grain home brewing today! The Brewer's Edge Mash & Boil with Pump is a single vessel, electric brewing system that lets you mash up 16 lbs.of malt and boil up to 7.5 gallons with hardly any footprint. An internal sparging basket allows you to easily lift the grain out of your boiler, letting you mash and boil in just one vessel. The adjustable digital thermostat can display reading in either Fahrenheit or Celsius, and features an adjustable run timer, preset at 3.5 hours for safety. Not only does the Mash & Boil make brewing simple, it helps save you time as well. The delayed start timer lets you set your Mash & Boil to turn on and begin heating your sparge water up to 24 hours after setting the timer. No more watching water boil, simply come home to water ready to brew with! The Mash & Boil is powered by 110 volts (1600 watts), easily plugging into any GFO home outlet and avoiding the need for any bulky brew stands, outdoor burners, or 220 volts plugs. Mash & Boil with Pump Features: -Double Wall Stainless Steel Construction -Digital Thermostat -Internal Sparging Basket -External 1/2" Stainless Steel Valve -Mash up to 16 lbs. of malt -7.5 gallon maximum capacity -110 V / 1600 W -5' power cable -Dimensions: 14" W x 28" H (40" H with Sparging Basket)

• ALL-IN-ONE: The Mash and Boil includes pump and makes home brewing and mashing easy - no need for an outdoor burner or brewing stand. Our precise thermostat and internal sparging basket lets you mash and boil in the same vessel.
• TEMPERATURE CONTROL: This model features an adjustable thermostat with a Fahrenheit and Centigrade toggle. A thermometer hole is provided in the lid, in case you want to monitor the temperature of the top of the mash.
• RECIRCULATION PUMP: Easily attach the Recirculation Arm and tubing and turn on the recirculation pump which keeps even temperatures throughout the brewer during mashing.
• PROGRAMMABLE TIMER: Our brewing system comes with an adjustable runtime preset at 3.5 hours for safety and it also features a delayed start timer, so you can program the Mash and Boil to turn on up to 24 hours after setting.
• STAINLESS STEEL: The Mash and Boil’s exclusive double wall stainless construction conserves heat and is very easy to clean.

User questions & answers

Question:	Do you have the 220v version
Answer:	There is no 220v version in the USA
Question:	Does this version with the pump have the overflow pipe that runs down the center like the Robobrew
Answer:	no
Question:	What's a good insulation jacket for this
Answer:	Thanks for reaching out again for more information about your Marsha and Boil unit. We like questions. And again we asked our supplier for an official response so you get reliable information. Here it is and cheers to your brewing! The Mash and Boil features double wall stainless steel construction that helps to insulate and conserve heat. If the customer is brewing in an extreme environment where this is not sufficient, we recommend wrapping the unit in foil batting that you should be able to find at a hardware store.
Question:	What size of plastic hosing would I need for transferring and such
Answer:	I use 3/8" ID silicone tubing to transfer wort from the kettle to the fermenter, but its a tight fit over the barbs on the spout and vinyl tubing probably wouldn't stretch enough. If I was using vinyl, I'd buy 1/2" ID tubing to make the transfer. Same goes for the removable recirc line used with the pump - 1/2" ID tubing would probably be the right call.

Product description

For home brewers: more precise, 7.9 gal. mash tun made of 304 stainless steel with

easy operation via LCD display and touch-screen.

1600 W strong mash and beer kettle with timer and thermostat for precisely accurate

heating and warming..

Top Features:

• Complete set for simple mashing at home: kettle, sieve insert, grain container,

circulation pump .

• 1600 W powerful heating element

• Stainless steel boiler for even temperature distribution

• Easy operation with clear LCD display and touch control panel

• Easy emptying by a secured drain tap

Features:

• Manual or automatic control of the mashing process

• Up to six programmable mashing steps

• Temperature, time and power adjustable

• Display of the current mashing step

• Drain tap with fine mesh filter

• Cover made of tempered glass

• Removable grain container for easy removal of the grains

• Circulation pump for easy stirring

• Includes sieve insert for filtering the mash

• Off switch on front of unit

• All metal parts made of 304 stainless steel

• Power supply: 110-120V ~ / 50-60Hz

Included:

• 1 x kettle

• 1 x sieve insert

• 1 x circulating pump

• 1 x grain container

• 1 x glass lid

• English language manual (other languages:Spanish)

Dimensions:

• Measurements: about 15 x 27.5 inches (ØxH)

• Weight: about 26.4 lbs

• VERSATILE: A beautiful mash tun for any brewing: light or dark, dry or sweet, wine or beer, with the Klarstein Mundschenk mash kettle you can turn create wonderful worts or must.
• SECURE: Up to 7.9 gal of brewing contents can mashed in the large stainless steel kettle.
• INTUITIVE OPERATION: A clearly arranged touch panel with LCD display makes it possible to set the temperature, cooking time and power on the device manually. The device's LCD display always shows the exact current temperature inside the boiler.
• QUALITY: Taste-neutral 304 stainless steel tank elements mean that the brewing process is always hygienic and after use the tank is easy to clean.
• EXPERIMENT: Make up to 30 liters of fresh beer or fruit wine from your home. Simplicity and thoughtful design means your home brewery is complete. Bottoms up!

User questions & answers

Question:	Is it double-walled stainless steel
Answer:	No. It is single walled. If the reason you're asking about it being double walled is for temp control purposes that is not a problem. I upgraded to this unit from a Mash and Boil without the pump. The M&B is double walled (which you would think would be a plus) but I was fairly disappointed with the temp swings during the mash process. The heating element wouldn't kick on until the temps were 5+ degrees below the set temperature and then it would always overshoot the temperature by as much as 10 degree too high. The mash would have 10-20 degree temperature swings. This unit is much more percise and the recirculation also plays a big part of that. The temperature always seems to stay within a couple degrees over or under the set temperature. I would not be concerned with it only being single walled.
Question:	What temp does this heat the mash to? (What is the max temp
Answer:	It will boil your wort, so 212 degrees. You can set it lower for whatever temp you want your mash to be.
Question:	Which wort chiller would you recommend for this brewing system? What is the internal diammeter for the kettle
Answer:	Even though it's not listed in the discription or pictured, it actually came with a stainless wort chiller. Just the actual chiller itself. No hose or fittings to hook it up. The chiller is also fairly short. It appears to be 25 feet of 3/8 inch stainless pipe. It would not be very efficient for chilling a full 5-6 gallon boil. The inside dimensions of the kettle are 16 1/2 inches deep and 13 3/4 inches internal diameter if you want to use a more robust chiller. I have been using the recirculation pump to push the wort through my plate chiller post whirlpool with great results.
Question:	Can this be used as a temperature controlled fermenter
Answer:	No. The title on Amazon's site suggests this can be used as a fermenter but this is strictly an all-in-one brewing system. It's for the mash and boil only. Attempting to use it as a fermenter would be extremely risky. There is no seal on the lid nor are there any sort of clamps to hold the lid on. The lid just rests metal on metal with nothing sealing it. Fermenting in it would surely expose your beer to oxygen and possibly contaminants.

Product description

This is a complete, turn-key, all-in-one home brew beer system. Make your own all-grain craft beer (like IPA's, Pilsners, Pale ale, Stouts, Porters, Saison, ESB, Wheat, Sours, Browns, Reds, and more!) at a fraction of the cost of store bought beer. This industrial grade, food safe, 100% stainless steel system is digital electric and does not require an additional heat source. It utilizes "brew in a bag" (BIAB) technology, which means that you can brew an entire batch of beer in the same kettle with the help of our stainless steel grain and hop baskets.

• stainless steel, digital, electric, complete, turn key,

User questions & answers

Question:	Does the control box have blue tooth capability
Answer:	The beer thief is 18 inches long and works well for pulling a sample from a carboy.
Question:	Since you are using 110v how long does it take to get to mash temperature and then how long to boil
Answer:	Yes, this “Wine thief” (useful for beer or wine brewing, to sample product in an unfinished stage) will fit in the top of milk or distilled water 1 gallon plastic bottle.
Question:	what are the shipping dimmension
Answer:	It varies...from 5/16" OD to 7/8" OD
Question:	What capacity is the kettle
Answer:	Thank you for your inquiry. This unit is not battery operated and requires to be plugged directly into an outlet. We would also advise not having anything else plugged in along with the unit, as it draws a lot of power. If you have any other questions please do not hesitate to contact our consumer relations team by emailing us at [email protected]. Thank you.

• PORTABLE SIZE: 128oz capacity and the size of 7.7"L x 5.3"W x 18.3"H fits standard home cooler/fridge and easy to transport
• KEEP YOUR BEER FRESH: Mini dispenser system can maintain vacuum pressure in the keg and keep fresh of homebrew, draft and craft beer for few months, also the food grade stainless steel material keeps beer flavor
• UPGRADED REGULATOR: The upgraded regulator has a more accurate PSI degree, fine-tune pressure by rotating the adjustment knob can make the beer get perfect carbonation and head
• CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges（3/8" Thread）into the regulation supply to maintains perfect carbonation. 16g capsule can tap 128OZ of beer. (CO2 CARTRIDGE NOT INCLUDED)
• MINI KEG COOLER JACKET: The insulated keg cooler fits 128oz mini keg, this jacket will keep your beer cold for 3 hours at room temperature. There is nothing more fun than drinking ice cold beer!

User questions & answers

Question:	Will a microbrewery fill this
Answer:	Most microbreweries will fill the mini keg. Some breweries may be restricted to filling up a max of 64 oz. It varies from state to state and their license restrictions.
Question:	Is the stand pipe made of stainless steel or plastic
Answer:	No beer will touch this. The CO2 is pushed through and regulated by this.
Question:	Will a microbrewery fill this
Answer:	I do not think so, it is stainless,, however not familiar with properties of kumbucha.

Product features

THE BEVERAGE ESSENCE KEEPER

TMCRAFT 128OZ pressurized stainless steel growler that keeps fresh for homebrew, draft and craft beer. The upgraded regulator provides stable pressure to make beer get perfect carbonation and head. The mini keg is portable, bring your beverages anywhere.

SHARE BEER WITH FRIENDS ANYWHERE

TMCRAFT pressurized growler is the ultimate in portability, take your favorite beverage anywhere you see fit, enjoy fresh and carbonated beverage at outdoor, home or office...

ENJOY FRESH CARBONATED BEVERAGES ANYWHERE

TMCRAFT pressurized mini keg provide upgrade regulator to keep beer fresh and carbonated. Fill the mini keg with confidence, knowing your beer will stay carbonated for weeks.

• SPECIFICATIONS: 1/2inch MPT Inlet&Outlet; 110V/60Hz; 5GPM max. flow; 10W rated power; No self-priming; Do not run dry; 4.75ft long 3-prong power cord.
• FDA FOOD COMPLIANT - Stainless steel is used in professional setups because it is a durable, food-grade metal that can withstand caustic chemicals and can be effectively sanitized.
• EASY TO USE: Prime by running liquid through pump prior to turning on; The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow; Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle
• MATERIAL PERFORMANCE: Pump extraction medium temperature changes should be controlled within 100℃, high temperature does not exceed 120℃. Shaft bearing adopt special ceramics material which make it characterize strong resistance for abrasion and corrosion.
• MAGNETIC: Fully sealed pump motor with connecting magnetic shaft and magnetic propeller; Magnetically coupled for enhanced operation

User questions & answers

Question:	How do you sanitize this? Is it possible to pump boiling wort through it to sanitize it before pitching? Can it handle the heat
Answer:	Depends on it's application in home brewing. If transferring HOT wort, sanitize the recirculating the wort through the pump during the last 10 minutes of the boil and create a whirpool. If transferring cool wort, recirculate a Star-San solution through it immediately prior to transferring chilled wort As you start to transfer to the final vessel, collect the Star-San solution in a bucket until you get clean wort. Then add to fermenter and pitch. If you're using it for transfer pre-boil liquid, you can recirculate with PBW at 140* F for 20 minutes and then flush with clean water at 140* F for another 20 minutes. When you are finished using the pump for any transfer, follow the steps to recycle PBW and water prior to storing pump until next use. Lastly, ALWAYS put the caps back on the inlet and outlet while in storage; creepy crawlys hide in the darndest places!!
Question:	Can you adjust the flow rate on this pump
Answer:	You cannot adjust the speed of the pump, but you can add a ball valve to the output and slow the flow rate that way without harming the pump.
Question:	What size o-ring and where can I get them to replace
Answer:	Remove the screws in front that connect the impeller housing to the main body to gain access the internal 'wet' end components. Carefully separate the body from the cover and pull out o-ring. Take it to any home improvement store and get it sized/matched/replaced.
Question:	When priming, there will be an air space from top of container to mash and liquid from top of container to pump. Is this sufficient to prime pump
Answer:	Rule of thumb here is if gravity wants to push water/mash/fluid into the pump housing your good.

Product features

About Product Structure and Advantages

The safest and most efficient way to move piping hot and heavy loads of liquid is to use the Magnetic Drive Pump. Transferring liquids is a part of any homebrew operation, and you will eventually find yourself with a brew kettle or fermentation tank that is of higher capacity.

It is unnecessary to fit with traditional shaft seal and complete-ness sealed constitutive water pump. Avoid defects of pollution after corrosion caused by liquid leakage and that still adopts special ceramics as shaft bearing, characterizing strong resistance for abrasion and corrosion.

1/2” MPT Inlet/Outlet

Stainless-steel head, magnetic pump for strength and longevity;

Resistant to abrasion, corrosion, and heat up to 221 degrees Fahrenheit

Small & Easy to Use

You can use this device to transfer hot water from your kettle to a mash turn or recirculate mash water and spurge and transfer to a brew kettle.

TIPS

Do not run the pump dry

For the first use, it is recommended to sterilize the pump head pipe

• The first complete taproom in a box!
• Two NEW Draft Brewer 5-Gallon Ball Lock Kegs
• CO2PO Double Body CO2 Regulator with recommended beer style ranges right on the dial face (CO2 tank not included)
• Two fully assembled CO2 gas lines & nylon washers to ensure tight seals
• Two fully assembled draft beer lines for pouring brew from your kegs

User questions & answers

Question:	Can this system be used in a commercial kegerator or homemade keezer
Answer:	This system comes with ball-lock connections that are different then Sankey (commercial kegs), while they can be used together it does take some modification. A homemade keezer is often the way most people use this system.
Question:	What is the height with ball lock connectors attached? And can you use this regulator in a mini fridge
Answer:	I use a standard ball lock corney keg connector.?. I use these in a kegerator and in mini 3 shelf refrigerators...fits inside w/o shelves obviously:)
Question:	Does this kit come with a CO2 tank
Answer:	It does not. Full CO2 tanks cannot be shipped and an empty tank would still need to be filled locally. There are local companies that provide CO2 services for beverage dispensing. You can often find one that offers a CO2 tank exchange that eliminates the need to purchase a tank yourself.
Question:	Why do I need a double regulator
Answer:	A double regulator is able to provide two unique pressures, allowing you to handle each keg independently and dial in the perfect carbonation and pour for each different beer.

Product features

SIMPLE SET UP. MINIMAL MAINTENANCE. MAXIMUM DRAFT HOMEBREW ENJOYMENT

BUILDING A KEGERATOR, KEEZER OR MAN CAVE? START HERE!

• 【SPECIFICATIONS】-1/2inch MPT Inlet&Outlet; 110V/60Hz; 5GPM max. flow; 10W rated power; With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft).
• 【SAFE TRANSFER LIQUIDS】- Tested for safety and performance standards, it can transfer hot and cold liquids quickly and safely. Comply with FDA food standards, can be used in prpfessional occasions. Food grade pump can withstand caustic chemicals and can be effectively sanitized.
• 【QUIET AND EFFICIENT】 - The separation of the pump main shaft and the impeller achieves the effect of damping and preventing vibration, and reduces the impact of the motor vibration on the pump. With excellent smooth running and efficient quiet cycle.
• 【EASY OPERATION】- Prime by running liquid through pump prior to turning on; The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow; Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle
• 【USED WIDELY】 -This homebrew beer pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment.

User questions & answers

Question:	Can pump use in the upright position that is installed vertically
Answer:	Yes, it can. As long as you make sure the pump is primed (only fluid between the intake and source reservoir) and that there is a steady supply, you should have no problems and orientation has no impact on an inline pump.
Question:	Can someone please tell me where is this pump made? Thanks
Answer:	It's made in China, don't buy it because the pump housing is made of plastic, not stainless steel as advertised.
Question:	The pump was primed but will not circulate when plugged in what can be the possible problem
Answer:	Make sure that the pump is below the outlet valve or you break the vacuum prime.
Question:	Does it have a switch or a way to adjust the flow rate
Answer:	No it doesn't. You can use an inline fan control for on and off and flow control. Cdmall Electronic Fan Speed Controller Variable Adjuster for Hydroponics Inline Duct Exhaust Ceiling Fans with 6" Long 120V 15A Cord

Product features

Magnetic Beer Pump

Fully sealed beer pump motor with connecting magnetic shaft and magnetic propeller. Shaft bearing adopts special ceramics material which makes it characterize strong resistance for abrasion and corrosion.

Food Grade Stainless Steel

Durable and reliable with stainless steel housing. Pump extraction medium temperature changes should be controlled within 100℃, high temperature does not exceed 120℃.

1/2" MPT Inlet/Outlet

Magnetic pump head with 1/2 inch Thread is made of Food grade 304 stainless steel, High resistance to corrosion, Not easy to get rust, Non-toxic, Lifetime-Using brewing pump.

Enjoyable Quiet Operation

Producing low noise so that you will not be bothered by high-decibel pollution and can work in a quiet environment for brewing beer.

Easy To Use

Prime by running liquid through the pump before turning on; The liquid travels from the bottom of the valve into the pump, and once the device is powered on (plugged into an outlet), the propeller circulates liquid for maximum flow.

Wide Application

This magnetic drive pump is a perfect pump for your brew system. Use it to move hot water in an all-grain system and also to transfer water from boil kettle to fermenter.

Magnetic Brewing Beer Pump

The safest and most efficient way to move piping hot and heavy loads of liquid is with the magnetic beer pump. It will save time, effort, and serious injury. Magnetic pump, stainless steel head, resistant to abrasion and corrosion, durable and long life. Our beer pump has been tested for safety and performance standards.

Product description

What's in the box?





1 × 64OZ Black Growler/Keg



1 × Travel Cap



1 × Durable nitro coffee dispenser



1 × Nitrogen Regulator



1 × Nitro Tap



1 × Removable Handle



3 × Food Grade Hose



1 × English Manual

• ☕ UPGRADED NITRO COLD BREW ➦ Enjoy the great taste of Nitro Brew coffee at home without paying at a coffeeshop each time! Fill up the keg with store bought or home brewed cold brew coffee and add super charge with a nitro charger capsule. Store in your home refrigerator and enjoy a frothy iced coffee that will taste better and stay fresh much longer!
• ☕ ORIGINAL PREMIUM DESIGN ➦ Our 2021 model keg is equipped with a pressure relief valve that is unique to its design and upgraded tap, giving a consistent pour that minimizes dripping. Attractive, durable matte flat black finished, food grade stainless steel 64 oz keg, coffee spear with unique pressure relief valve, stout creamer faucet; Nitrogen (N) cartridge holder casing and food grade hose makes it a A perfect gift for coffee lovers!
• ☕ FOOD GRADE STAINLESS STEEL ➦ Every single part of the 64 Oz Nitro Brew coffee keg is made of 304 rust-proof stainless steel to maintain a clean and bacteria-free environment for your Home Brews. The material of faucet distributor kit also provides a robust and long-lasting build to keep your beverage cold for a longer period of time, plus it is easy to assemble, to fill, and clean.
• ☕ DETACHABLE REGULATOR & HNADLE ➦ The cold brew keg features upgraded stout creamer faucet with pressurized valve where cold-brew coffee infused with nitrogen gas is released creating a creamy, stout-like effect just like your favorite brewed coffee at your local coffee shop. Its standard size fits all kegerator cooler or fridge. You will never have to worry about the quality of your drink again!
• ☕ JUST ADD A N2O CARTRIDGE ➦ The only thing you need to get is 8 gram whip cream non-threaded N2O (Nitrous Oxide) charger. 1 Charger is good for a full keg of nitro cold brew . N2O CARTRIDGE NOT INCLUDED! We offer 100% satisfaction guarantee so for any reason if you are not satisfied, please contact us for immediate solution.

Product description

Stainless Steel 1.6 Gallon Mini Ball Lock Keg for Home Brew



Barely bigger than a milk jug, it slides straight onto a fridge shelf, pops in a cooler or drops right into your trunk. From tailgating to camping, a picnic or a party, It is the party-powering ammunition you need to have a good time, anytime and anywhere.

• Stainless Steel 1.6 Gallon Mini Ball Lock Keg for Home Brew
• Small and mighty: Mini keg system that packs the power of a taproom into a portable, compact 1.6 gallon barrel.
• Artillery for the small batch brewer. Carbonate homebrew in minutes, not weeks. Real-time carbonation control. A quick pressure adjustment and you're instantly pouring perfect pints.
• This kegs are easily stackable once disconnects have been attached.
• Note: Does not include a CO2 Tank

User questions & answers

Question:	Where is this keg manufactured
Answer:	China
Question:	How does this work for making carbonated water
Answer:	You can use this to carbonate water.
Question:	Is the dip tube diameter (od and id) the same as regular 5 gallon corny kegs? wanting to put a mixing nozzle inside to increase line resistance
Answer:	I haven't measured with a micrometer but they seem to be interchangeable with the exception of the length.
Question:	What is the height from the bottom of keg to the top of the handle? What is the diameter
Answer:	It is 14.25” high from the bottom to the highest point of the handles. It is 9” in diameter.

Product description

Introducing Draft Brewer, the first complete taproom in a box. Quick setup, minimal maintenance, and more time than ever to enjoy your craft. The Draft Brewer Single Keg System is ready out-of-the-box to get your taproom up and running. Start serving and sharing your brew within just days of receiving your new system. Switch out brews in an instant or relocate the party on a minute’s notice. Fully-assembled Draft Brewer tap lines snap right on your keg. Enjoy your brew sooner and carbonate beer with a CO2 tank (not included) in 1-2 days instead of 2-4 weeks. Best of all, it takes just a swish of sanitizer to prep your Draft Brewer keg for the next batch. Enjoy extra free time to brew, share and enjoy more with the very first taproom in a box. Serve your brew from any nook or cranny in your home with swivel-connection tap lines. With a Draft Brewer system, no brew cave or home pub is too small to enjoy good beer on tap. Take the guesswork out of perfect carbonation. Adjust the pressure in real-time and guarantee perfect pours. The ultra-durable CO2PO Dual Gauge CO2 regulator makes carbonation easier than ever with recommended beer style guidelines right on the dial face. Hand-adjustable pressure knobs are twist-and-go. High-contrast gauges give you pressure information in a quick glance. Enjoy ideal carbonation without nightmares of bottle bombs ever again. Finally, a serving method as impressive as your homebrew. Bring homemade beer to a party and you’re interesting. Bring a keg of homemade beer to a party and you’re a hero. Includes everything except a CO2 tank to share and enjoy draft homebrew.



Features:

One New Draft Brewer 5-Gallon Cornelius-style Ball Lock Keg

Dual-Gauge CO2 Regulator

Fully assembled gas line & nylon washers to ensure tight seals

Fully assembled draft line for pouring brew from your keg

• The first complete taproom in a box!
• One NEW Draft Brewer 5-Gallon Ball Lock Keg
• CO2PO Dual-Gauge CO2 Regulator
• Fully assembled CO2 gas line & nylon washers to ensure tight seals
• Fully assembled draft beer line for pouring brew from your keg

User questions & answers

Question:	Help! I am buying a kegerator that uses a pin lock. What do I need to purchase to adapt the ball lock fittings on this keg
Answer:	I dont know the answer myself but its on YouTube i just checked google it and it should pop up
Question:	Will the co2 regulator fit on a 50lb tank
Answer:	I'm pretty sure it will.
Question:	Post size
Answer:	25" tall, approx., 8" wide
Question:	Can I use this to fill my 20 ounce tank I use for paintball
Answer:	This is used to hold and dispense homebrewed beer.