10 best double kegerators

Product description

Whether you are a beer drinker or an avid entertainer you will be the best party host with this ultimate indoor freestanding kegerator by Danby Appliances. This dual tap keg cooler is an exceptional addition to any wet bar, game room or man cave and provides the convenience of two different cold beers on tap at once. It uses R600A refrigerant and has an automatic-defrosting system which makes for an excellent product with hassle-free maintenance. This keg cooler includes a single gauge regulator, CO2 tank and all required hardware. It has a precise mechanical-thermostat to keep your beer cold and a spotless-steel finish resembling stainless-steel but much easier to clean. Did we mention it has a scratch-resistant worktop? Furthermore, this unit includes an American Sankey coupler, a chrome guard rail and drip tray, and optional swivel castors for easy portability. The door hinge is reversible which allows you to adjust it for either left or right-handed opening.

• This Danby Dual-Tap Kegerator is the ideal kegerator to keep your favorite beverage on tap
• 5.4 Cubic Feet (153 Liters) Capacity: This kegerator fridge has a spacious capacity of 5.4 cu. ft.
• Clean Bright and Modern: Spotless steel finish that looks identical to real stainless steel, but without the smudging
• Great Design: Chrome guard rail, drip tray and free standing, indoor application
• Versatile: Scratch resistant worktop, reversible door hinge for left or right-hand opening and optional swivel castors for easy portability
• Easy Set Up: This keg cooler includes a single gauge regulator, CO2 tank and all required hardware
• Easy to Operate: Mechanical temperature control and automation defrost for hassle-free maintenance
• Environment Friendly: A beer kegerator that uses environment friendly R600a refrigerant

User questions & answers

Question:	Will 2 cornelius kegs fit in this unit
Answer:	Hello Dawn, Thank you for your question. I have reviewed the info provided by the manufacturer, it does not specifically say anything about a Cornelius kegs. However, it does state it will hold 1 full size keg. It will also accommodate the following sizes. This keg cooler will accommodate the following: 1/6 barrel: Can chill and dispense 2 simultaneously 1/8 barrel: Can chill and dispense 2 simultaneously 1 full size keg (1/2 barrel) 1 straight pony keg (1/4 barrel) I Hope this answers your question. Thank you again for your question. Sincerely Jim Appliance Oasis
Question:	Does the depth of 24 inches account for the tank or is the depth deeper than 24 inches
Answer:	Hello, Thank you for your question. The 24 inch depth does not account for the CO2 tank on the back of the unit. The tank and regulator system adds approximately 10 inches to the overall depth. Regards Ann
Question:	What is the circumstance of the beer tower would like to replace it with at chrome tower
Answer:	Hello, It is a 3 inch tower. Regards Ann
Question:	How long are the air hoses for the air tank? Are they long enough to place the air tank in a cabinet next to the kegerator
Answer:	Possibly, as long as the cabinet is on the backside of the kegerator. You could also purchase longer air tubes from an ACE Hardware or Northern Brewer type business.

• 【High Capacity】: 6.0 Cu.ft capacity holds US standard 1/6, 1/4, and 1/2kegsaccommodating for large parties, recreational rooms, bars, barbecues,and mancaves. (KUPPET Beer kegerator do not contain Kegs.)
• 【Stylish Design】: The appearance is novel and unique, and the single tap kegerator is independent of the brewing bar and the restaurant.It features a stylish black cabinet, an easy-to-clean detachable built-in drip tray, and a chrome-plated guardrail.
• 【Easy Mobility】: The four casters on the bottom allow the beer kegerator to be easily transported from one room to another, and the front casters can be locked to ensure that the unit does not roll on a hard floor.
• 【High Performance】: A stainless steel internal floor mat helps to prevent damage to the liner and also allows the kegerator to slide smoothly in and out during loading and unloading.All components are of high quality, ensuring long-term performance.
• 【Includes】: One stainless steel beer tower with stainless steel faucet, one CO2 tank (empty), one single gauge regulator, one stainless steel D coupler, one ID beer line, one ID gas line. The unit measures 21.3 W x 26.61" D x 35.43" H.

User questions & answers

Question:	Does everything you need come for a dual tap setup
Answer:	Seeds are surprisingly resilient. So long as they are kept in a dry cool place then the seeds will remain viable! If you are looking to store them in your house, then the crisper drawer in your refrigerator is a great place for them!
Question:	Previous reviews state that this item does not come ready for dual tap out the box. Is this true and if so, what additional parts are needed
Answer:	let me know ! My mint didn't grow either. Other than that, always successful.
Question:	Will this hold a 30 L Unikeg, which is 22.52 inches tall
Answer:	I do not know but mind only lasted 2 months because the batteries would not charge up, I do not recommend
Question:	Will this model kegerator hold a blue moon 15.5 keg
Answer:	The only difference is the color of the unit.

Product features

KUPPET Full Size Kegerator& Draft Beer Dispenser, Dual Tap Kegerator

KUPPET Full Size Beer Kegerator has a novel and unique shape, which is very attractive in large restaurants, bars, beer plazas and other places. The Keg Beer Cooler also has super high quality and reliable temperature control, allowing you to easily adjust the temperature up or down, the wine temperature is stable, energy saving, and cooling capacity. Can maintain the good taste of beer.

INCLUDED

Stainless Steel Column Draft Tower

Chrome Plated Brass Faucet

Aluminum CO2 tank (empty)

Single Gauge Regulator

stainless steel D coupler

Beer Line & Air Line

Drip Tray

Black Tap Handle

Spanner Faucet Wrench

Acceptable Keg Configurations

Holds US Standard 1/2 1/4 and 1/6 Kegs. Only two 1/6 kegs can be placed at the same time. Our products do not contain Kegs.

Dual Beer Tap Towers

KUPPET Beer Kegorator is topped with a beer tap tower, along with a drip tray and chrome guardrail. The advantage of this design is that it is easy to move and clean.

Low Noise

Low noise, enjoy low noise life, maintain a quiet working environment, not affected by running noise.

• Double Tap, Two Tower Keg Cooler - Commercial Grade Kegerator; Dimensions: 72.8" wide X 24.4" deep X 35.6" tall
• Keg Capacity: Three 1/2, Two 1/2 and 2 1/4, or Two 1/2 and Three 1/6
• Forced Air Cooled Towers; Keg Couplers included
• ETL and NSF certified; R290 hydrocarbon natural and environmentally friendly refrigerant
• 1 Year Parts & Labor Warranty, 5 year Compressor Part Warranty - Commercial or Residential

User questions & answers

Question:	Does this come with 4 shelves
Answer:	You can take off the grow domes for a short period of time to look at the sprouts but put them back on. This are slow to start but when the seeds do sprout they grow pretty fast.
Question:	Does this unit cost more to operate than an average residential refrigerator
Answer:	Hi Asmaa, Since you got the Herb Garden mix, all you have to do is on your selector on the Aerogarden push the button until it indicates Herbs. It will automatically adjust to the appropriate lighting cycle for the Herb package. You may find, depending on when you actually hook it up and start it, the lights may be on during the day or at night. The Garden takes the guess work out of how long for it to light. It's a good package. Hope you enjoy.
Question:	How to adjust temperature
Answer:	Not really that necessary. Once they start growing so that you can see the seedling I took them off anyway and they still grew fine.
Question:	does this unit come with CO2 tanks
Answer:	Yes, actually aero garden offers mixed vegetable/ herbs, my last purchase consisted of two different types of basil, parsley, dill, mint, and something that did not grow!

Product features

PEAK COLD 72" Wide 3 Door Commercial Beer Dispenser

This double tower 4 tap keg cooler features a side mounted 1/4 HP compressor. The refrigeration system holds 33-38 degrees F with a programmable digital controller.

A wear resistant black vinyl over steel exterior, stainless steel interior with LED lighting and a stainless steel top allow this kegerator to fit in any setting. The cabinet has self-closing, lockable doors.

Shelves are included for storing bottles and cans. CO2 fittings, regulator and hoses are not included, allowing you to set up a system that works for you. A punch out is available on the side of the cooler to connect to external gas lines as needed.

This kegerator is ETL listed* and conforms to NSF std. 7 for commercial use and can be used in a residential setting as well.

* A representative sample was tested, investigated and found to comply with the requirements of the Standard(s) for NSF-7, identified with the ETL Sanitation Listed Mark and can be found on the Intertek Directory of Listed Products.

Stainless Steel Dual Tap Towers

A polished look for any setting or customize the handles as needed.

Stainless Steel Drip Tray

Drain away spills inside the cooler or to an external drain.

Forced Air Tower Cooling

Keeps the first pour as cold as the rest.

Keg Couplers Included

Type D couplers and tubing included for connecting kegs.

3 Half Barrels

Tap just your 3 favorites, there is plenty of room.

2 Half Barrels & 2 Slim

Tap 4 kegs and have something for every mood.

1 Half Barrel & 4 Sixths

Tap 4 kegs and have a backup cold and ready, or use one side for bottles with the included shelves.

Product description

Deluxe Kegerator Tower Kit

This kegerator conversion kit easily converts a refrigerator or freezer into your draft beer dispenser. It includes a stylish and durable 3-inch diameter stainless steel tower, two faucets, a commercial-grade dual regulator, two heavy-duty lever D-type system keg couplers, and a stainless steel drip tray. Perfect for indoor and outdoor applications.

key Features

Double Gauge Regulator



The dual gauge regulator can easily measure the amount of PSI and adjust the output pressure. It has an easy-to-use large adjustment knob and includes a manual pressure release valve.

Convenient Keg Coupler



The D system keg coupler has a convenient handle design and is easy to use. It can be connected to the keg by quickly pulling out and down on the handle. Suitable for all "D" system kegs.

Beer Tower with Two Taps



The 304 stainless steel draft beer tower is famous for outdoor or commercial applications. The high-quality chrome-plated solid beer faucet conforms to the standard configuration of the commercial beer industry. 

Durable Beer Faucet Wrench



This heavy-duty faucet wrench can satisfy you to repair and adjust your beer system like a professional, saving you energy and unnecessary trouble.

Countertop Drip Tray



12" x 7" beer drip tray, made of stainless steel, anti-corrosion and scratch-resistant; with no drain, there is no need to drill holes and install on the table directly to ensure a splash-free desktop; it is also detachable and easy to clean.

Multi-Scene Application



Our beer conversion kit looks excellent mounted on your bar or countertop at home, hotels, restaurants, etc. Make it possible for everyone at the table to tend their brew. Let's enjoy the

• 【DUAL GAUGE REGULATOR】 - This commercial-grade dual pressure gauge regulator is constructed durably. The top pressure gauge indicates the output pressure, and the side pressure gauge tells you the remaining amount in the tank. The T-shaped regulating valve can easily adjust the barrel's pressure and the independent shut-off valves for dispensing up to two kegs at the same pressure.
• 【D SYSTEM KEG COUPLER】- The keg coupler has a sturdy nickel-plated forged brass body and a stainless steel nozzle suitable for all "D" system kegs. The lever handle is designed to be easy to use and makes it more stable and reliable than standard keg couplers.
• 【DOUBLE FAUCET BEER TOWER】 - 3" diameter beer tower consists of a 304 stainless steel body, sturdy and durable. It has a small and exquisite appearance and is equipped with a double faucet along with a set of fittings, which is easy to install and can enjoy happy beer time with friends together.
• 【HEAVY-DUTY BEER WRENCH】 - This beer faucet wrench features an all-metal structure, and it allows you to loosen or tighten the calf collar quickly and surely without scratching the tap. It is an essential tool when assembling a beer kit.
• 【12" x 7" SURFACE DRIP TRAY】 - The detachable stainless steel drip tray is used to collect excess beverages or liquids and provide you with a stain-free, mess-free, and splash-free work surface. Our draft beer dispenser is convenient to be installed in bars or counters in homes, hotels, restaurants, etc.

Product description

This draft beer towers with 2 taps is a simple and economical solution for your counter top, kegerator, keezer, or your home bar.



Let's enjoy the beer with your friend at the same time.



Made with BPA free stainless steel construction, safe and durable



3"/76mm diameter column



2 chrome plated brass faucet taps



The faucets are able to be completely dismantled for easy cleaning and sanitizing



the inside of the tower is lined with a thin styrofoam sheet to help with insulation for cooled tower systems



two separate 4" lengths of 0.16" clear beer tubing



Material: stainless steel + brass



Dimensions: 



Column(HxDia): 12.6"x3"



Tube length: 4' 



Weight: 4.03lbs







Package includes: 



1 x beer tower



2 x Faucet



2 x 4'beer tube



2 x little tube



4 x mounting bolts



1 x tower gasket



8 x hose clamps



1 x multi-purpose keg wrench



FAQ:



Q1:What's the warranty？



A:Any issue about our products(refunding or returning) or service, please feel free to email us. We promise to give you a satisfactory solution at the first time.

• High quality and durable - 3"/76mm diameter column polished stainless steel tower and 2 chrome plated brass faucet taps, compact and sturdy, never rusted.
• Double your pouring power - 2 taps speed up your pouring time, you can enjoy the beer time with your friend at the same time without waiting, The faucets are able to be completely dismantled for easy cleaning and sanitizing.
• With cooled tower systems - the inside of the tower is lined with a thin styrofoam sheet to help with insulation for cooled tower systems.
• Poduct dimension - The polished stainless tower stands 12.6" tall (not including tap handles) and is 3" in diameter, two 4'lengths of 0.16" clear beer tubes for 2 taps.
• Multifunction application - this draft beer tower set is great mounted on counter top, kegerator, keezer, or your bar.

User questions & answers

Question:	Are the tap handles the type that could be replaced with tap handles from an actual bar
Answer:	2.5"
Question:	What type of beer can you use
Answer:	Yep. I did.
Question:	Where do you pour the beer
Answer:	It is attached to the barb on the tower shank and it is clamped to the barb. The tubing is already pre-installed when it goes out.
Question:	Would this work with insignia - 5.6 cu. ft. 1-tap beverage cooler? https://www.amazon.com/insignia-beverage-cooler-kegerator-stainless/dp/b07dtf3yyk
Answer:	The tower is metal.

Product description

The Summerset SSRFR-TAP-2 Double Keg Tap for Outdoor Kegerator provides a premium accessory for use in your outdoor kitchen. Featuring 304 stainless steel construction, this tap tower has been built to last. The design of this tower matches the rest of the Summerset suite of products, while the double tap design ensures your two favorite beverages are always on tap.

• Stainless Steel Construction - Manufactured with high quality 304 stainless steel for long lasting use
• Dual Tap - 2 beer dispensers included

• 1. DUAL GAUGE REGULATOR: It comes with an appropriate pressure dial that features the style of a knob for regulating pressure. With a weight of 3 pounds, the unit comes with rubber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI.
• 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve
• 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole.
• 4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4" in length, which makes it easy to use on any surface.
• 5. STANDARD METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4" in length, which makes it easy to use on any surface.

User questions & answers

Question:	What is the waranty on this kit
Answer:	Hello, Thank you for your question. Unfortunately, we are unable to customize components of this kit on the Amazon platform. If you would like to process a component exchange, you may contact us at 800.710.9939. Thank you, Beverage Factory

Product features

BACOENG Double Faucet Door Mount Kit

Set up a home or commercial brewing system to serve cold draft beer using the BACOENG Kegerator conversion kit. It includes all necessary tools you need to make your work processed easily and saves you hundreds of dollars. It is ideal for seasoned beer enthusiasts looking for a reliable Kegerator before spending a fortune on a commercial unit, or people who are just starting out.

Instruction Manual includes:

Standard Beer Faucet

• * Featuring a quality exquisite polished brass body
• * Including a standard thread for quick connection to most branded knobs
• * User-friendly spring return handle design
• * Equipped with 4-1/8"(L) × 1"(OD) Long Nipple Shank

Heavy-Duty Dual Gauge Regulator

• This unit weighs about 4 pounds and includes a rubber protective covers.
• It always tell you working pressure and tank pressure with pinpoint accuracy.
• A convenient knob style pressure dial that can be adjusted without tools.
• Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
• Pressure Relief Valve Releases at 45PSI to Ensure Safety

D-System Keg Coupler

• Features a sturdy nickel-plated forged brass body with a stainless steel probe
• Designed for use with all domestic brand American D system Sankey kegs.
• The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg.
• A pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.

The handles on this system keep getting stuck. How to fix this?

Sticking faucets are a common problem in home draft systems, especially when they are not used often. Disconnecting the draft system and running the faucets under hot water for a few seconds usually does the trick. Also spraying the front of the faucets with water can help as well, essentially beer dries in the front portion of the faucet causing it to stick, beer is very sticky when dry but water breaks it down pretty easily.

I cant get anything other than foam, is there a problem with my settings?

1. High Co2 Pressure: We normally recommend 10~12 pounds. Pull the relief valve on the coupler and adjust output up as you are pouring.
2. Beer Lines: Beer lines longer than 6 feet can cause issues. After long use, please use our cleaning kit (ASIN B07HGN896R) to ensure that the lines are free from dirty.
3. Coupler Probe Washer: If it is damaged or missing, you will always get foam beer.
4. Poor pour: Hold the glass 45 degrees, tilt the glass upright as you reach the halfway point.
5. Warm hose: Install a tower cooler to cool the beer hose inside the tower.

How to fix find and fix a leak in a regulator?

Get a spray bottle and fill it with foaming agent. You can also use a no-rinse sanitizer like Star San mixed with water if you are a home brewer. You just need something that will bubble up when air is escaping.

TIPS: After the installation is complete, please be sure to observe the system for leaks for avoid wasting CO2.

The manual is lacking? Missing Accessories?

We have summarized the recent customer feedback and updated the manual. We will update for you the latest version. Besides, we offer a one year waranty. For any missing accessories and defective accessories, we will help without hesitation.

• Holds US Standard 1/4 and 1/2 Kegs. Does NOT support use of Coors, Miller, rubberized or other oversized kegs
• Temp Range: Low 30's to Mid 40's; Easy conversion to a refrigerator; 5 lbs CO2 cylinder included (supplied empty)
• Dimensions: 50-7/16" H (includes tap & casters) x 20-3/16" W x 20-1/16" D (Depth w/ external tank mounted: 30-1/2") (Height w/out tap and casters: 33-1/8"), Warranty: 90 days labor, 1 year parts
• For freestanding use only, Casters included for easy mobility, Drip tray catches spills to contain drips and messes
• For a stainless steel version please see model# KC2000SSA, for a dual tap see KC2000TWIN, and dual tap stainless KC2000SSTWIN

User questions & answers

Question:	Can I use this unit out side
Answer:	It is decently loud. We also unplug it when not in use. I would say it is louder than our fridge. Buuuuuuut, my husband loves the cold beer, so it is all worth it! lol
Question:	Will it hold two new style corny kegs
Answer:	It took a few hours. I made sure the beer was cold before I put it in the machine.
Question:	how long does beer stay fresh? how often do you have to change CO2 and where do you buy those? do smaller kegs stay fresh longer? how/when do u clean
Answer:	I think you will find many things can be put in the machine.
Question:	Should I turn off the keg coupler and co2 when Im away
Answer:	Most likely. You really need to pre-chill mini keg in regular household refrigerator before using. Also add cold water to unit. It is designed to keep beer cold not necessarily chill a warm mini keg.

Product features

EdgeStar KC2000 Ultra Low Temp Full Size Kegerator & Keg Beer Cooler - A Part of the EdgeStar KC2000 Family

Set up a home or commercial brewing system to serve cold draft beer using the EdgeStar Ultra Low Temperature Full Size Kegerator & Keg Beer Cooler (KC2000). EdgeStar full size kegerators are capable of reaching temperatures in the low 30s, making them the coldest of any kegerators on the market. Ideal for seasoned beer enthusiasts looking for a reliable kegerator before spending a fortune on a commercial unit, or people who are just starting out. The EdgeStar full size kegerator is an excellent value, combining a designed-to-fit refrigerator with commercial-grade, NSF-approved beer and air lines.



Specifications:

• Temp Range: Low 30's to Mid 40's
• Included casters for easy mobility
• Protective metal floor plate for added durability
• Two piece drip tray
• 1/2 barrel keg size allowed: 16 1/8"
• Reversible door
• Chrome safety rail
• Input voltage: 115 V/60 Hz
• Power: 105 W/1.5 A
• Weight: 81.6 lbs
• Internal Dimensions: 28" H x 16 3/4" W x 15 1/2" D
• External Dimensions (w/ draft tower): 48 1/2" H x 20 1/10" W x 24 13/16" D

Beer Components Included

Keg Configurations

Features

Able to maintain ultra low temperatures, the thermostat on the Edgestar KC2000 can reach into the low 30's.

Product description

Comes with all the basics required for a two tap mount into a kegerator wall or door, or refrigerator for the truly adventurous. Aluminum tank ships empty as per Federal Regulations. All tubing and connections required for assembly included.

• Basic Setup for Two Door Mounted Taps
• Aluminum Tank Included - Empty
• All Tubing and Clamps Included
• Faucet Wrench for Faucet tightening and cleaning
• Sanke Style 'D' Couplers for American Kegs

User questions & answers

Question:	Is this stainless steel everything or brass
Answer:	Hello Megan, Thank you for your question. You want to drill two (2) inch size holes in the countertop to install the tower. Please contact us if you need further assistance. Thank you, ZeZeeBeverage Factory (800) 710-9939
Question:	What size hole saw do I need
Answer:	The shank that comes provided with this kit is 4 1/8" long. Thank you, Beverage Factory Customer Service
Question:	What is the length of the shanks
Answer:	Hi,These couplers are meant for home brew ball lock kegs. Thank you,ArielleBeverage Factory800.710.9939
Question:	How big is the co2 tank that comes with it? 5lb, 2.5 lb
Answer:	This kit includes a liquid line that is 5 feet in length, with a 3/16" inner diameter. Thank you, Beverage Factory Customer Support

Product description

These are unique Keg Faucet Handle for kegerators, restaurants, and bars, soda makers, homebrewers, events, weddings, and much more! The tap handle’s magic comes from a dual faced chalkboard erasable surface that allows you to write in whatever you have got on tap.

Measures:

Approximately 8"Long X 2" Wide X 1" Thick

Chalkboard Insert: 5.9” Long



Threaded insert : 3/8 '' 16 UNC thread



Material: natural walnut wood



Engraved: One sided



Faucet is not included.



Chalkboard on the front of the handle to write your current brew

• Size: approximately 8" L X 2" W X 1" T. They all have the standard 3/8 '' - 16 UNC threads.
• Includes: Set of 2 walnut beer tap handle; Weight: 0.9 Pounds
• This double beer keg tap handles are laser engraved with pine nuts logo and features a chalkboard section to write the current brew.
• Perfect for kegerator taps, breweries, bars, pubs, restaurants and homebrewers
• Chalkboard: Easily write any custom message with traditional Chalk! Simply erase with a damp cloth.

User questions & answers

Question:	Caulk pencil doesn't work well. The chalk board is to smooth. Can i use a dry erase marker
Answer:	You can absolutely grow more than the seed kit that came with your garden. Generally herbs will last 4-6 months, salad greens will last 3-5 months, tomato and pepper plants can produce for well over a year and flowers can last even longer than that! We have a wide variety of seed kits or a Grow Anything Seed Kit so you can plant your own seeds. The possibilities are endless! You can mix plant varieties in your garden too, just be sure to prune your plants to ensure each ones is getting sufficient light.
Question:	That is an engraving of a beer hop cluster right, not a pine cone/nut?? Pine nuts would have nothing to do with beer
Answer:	Yes, there are some duplicate seed pods.
Question:	Is it chalkboard on both sides
Answer:	This kit requires an Aerogarden hydroponic garden system. It cannot be used alone.
Question:	Are the taps included as shown in the photo
Answer:	In the 7-pod kit: •The Traditional Medicinal 7-Pod Seed Kit includes 7 pre-seeded pods, featuring one of each: Chamomile, Mint, Holy Basil, Curly Parsley, Thyme, Sage, and Cilantro•Our patented, specially formulated Liquid
Question:	What type of coupler comes with this kit and how long is the door shank
Answer:	It would be better inside near a window or in a fully shaded spot outdoors. You will need to watch the water level it will need to be filled every couple days or the plants will dry up and the Aero-Grow will probably manfunction mechanically if it dries out.