14 best co2 pressure regulators

Product description

MRbrew Double Gauge CO2 Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants.



★The MRbrew Beer Keg Regulator works with any Co2 Tank with a CGA-320 valve.

★Both gauges feature an easy to read design.

★The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi.

★The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display.



So you'll never be caught off guard by an empty CO2 tank again.



This brewery-grade beer regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.

The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg



Allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you're dispensing. A large adjustment knob allows you to make quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.



The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve.

★Hose barb end has been designed for use with 5/16" I.D. pressure tubing

★5/16" barbed output for use with 5/16" ID hose

★Integral safety pressure relief valve releases at 45 PSI

★Large hand control makes it easy to adjust the presure inside keg

★Inlet nipple has a permanent thick nylon seal that eliminates one source of leaks, so you will not need to use a new fiber washer every time the tank is changed



👉 Regulators are all pressure tested to assure reliability in the field



🎁 You have 1 Year Warranty Against Manufacturing Defects

• 【PRESSURE YOU WANT】This brewery-grade keg regulator features a multi-stage body for more precise control when making little adjustment to the output pressure. And the lock ring under the adjustment knob can be quickly locked without re-adjustment, and maintains steady Co2 pressure.
• 【NO LEAKS & EASY INSTALLATION】Join our leading assembly technology, our co2 keg regulator ensure fast and stable transmission without leaking. All you need to install this beer keg regulator is an adjustable wrench. Always place a washer between the lock-down nut and the tank to ensure a tight seal.
• 【PROFESSIONAL GRADE】Easy-to-adjust large knob, easy-to-read dual-gauge with 45 PSI safety relief valve and gas shut-off valve, Our regulator for kegerator, which has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants.
• 【HEAVY DUTY & DURABLE】MRbrew CO2 Pressure Regulator for Draft Beer is a heavy duty unit, constructed of forged premium brass with all brass connections and components and features a sintered brass inlet filter, integrated nylon tank connection washer (and spare). Regular replacement of washers ensures long-term use.
• 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew keg regulator is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!

Product features

MRbrew BRAND HIGH-END HEAVY KEG REGULATOR, AN AMAZING CHOICE FOR YOU!

Product description

MRbrew BRAND HIGH-END HEAVY THREADED BEER KEG REGULATOR, AN AMAZING CHOICE FOR YOU!

Regulator body: Heavy forged brass is well-formed, no dents

Easy to install: Connect regulator to CO2 tank with a spanner or wrench

Highly efficient filter: Keep contaminants out of regulator, guarantee best-in purity CO2 gas

Under big pressure adjustment knob is a Big lock ring, rotate it to fix pressure



1/4’’ VERSATILE SWIVEL NUT THREADED FITTING

2 Barbs: For 1/4" I.D & 5/16" I.D size hoses

Allow more options of extra functions and possibilities for your kegging system



EXCELLENT MULTI-SCENARIO APPLICABILITY

Excellent for wine and beer brewing

Suitable for bars, tasting rooms, restaurants, etc

Perfect for kegs & 5 gallon kegs & 1.75 mini kegs & half barrels & quarter barrel units



EASY TO ADJUST PRESSURE

Quick and accurate pressure adjustments through big manual pressure adjustment knob with no tools needed

Brief pulling of pressure relief valve helps ensure an accurate pressure reading on process of any adjustment to the regulator



STABLE EASY-TO-READ DUAL GAUGE WITHOUT DRIFT

0-60 PSI gauge: Displays pressure transferred to your keg

0-3000 PSI gauge: Displays the amount of co2 pressure left in CO2 cylinder

Effectively keep you knowing how much CO2 left in co2 tank



YOU WILL SURPRISINGLY GET

1* Keg regulator

1* Hose clamp

2*washer

2*1/4’’ Swivel nut

2*Barbs(2 size)



KIND NOTE

Suggest pressure for beer: 10-30 PSI

Pressure relief valve releases at 45 psi

Not for gas blender or nitrogen generator application, just for CO2!

Be sure regulator is connected in a dry environment, no lube or teflon, it’s a tube connection that has tight tolerance

• 【1/4’’ THREADED QUICK DISCONNECT】MRbrew thread to barb keg beer regulator comes with 1/4'' swivel nut, allows CO2 regulator to be used with 1/4" and 5/16" I.D size hoses, threaded setting makes disconnection between regulator and gas hoses a great breeze!
• 【EXCELLENT SEALING & ANTI-BACKFLOW】Durable thick nylon washer achieves quad—Ring inlet seal at connection between tank and regulator, perfectly avoids one leakage source, turning off ON/OFF valve avoids back-flow of beer, worry-free operation with MRbrew keg regulator!
• 【YOUR SAFETY, THE FIRST!】Integrated sintered bronze mesh inlet gas filter perfectly controls co2 gas flow, manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator!
• 【DUAL GAUGE & STABLE PRESSURE】MRbrew upgraded regulator comes with dual pressure gauges, displays pressure clearly, easy to adjust and stabilize to the pressure you want by pressure adjustment knob, a well-built regulator for getting accurate pressure!
• 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew keg regulator is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!

Product features

MRbrew BRAND HIGH-END HEAVY THREADED BEER KEG REGULATOR, AN AMAZING CHOICE FOR YOU!

Product description

The Kegco 542 Pro Series works with any CO2 tank with a CGA-320 valve and measures psi, as well as the volume of the CO2 gas in the cylinder. The regulator body is constructed of forged brass with all brass Connections and components, a sintered brass inlet filter, integrated nylon tank Connection washer (and spare) And self resetting safety release valve. Both gauges feature an easy to read design. The top gauge lets you know how much CO2 pressure is in the keg and displays 0-60 psi. The second gauge lets you know how much CO2 gas is left inside the CO2 tank and features a 0-2000 display. A large adjustment knob with a lock ring allows gas flow to be changed without the need for a screw driver. This regulator includes a tamper proof safety pressure relive valve that releases at 45 psi. There is also a shut off valve that allows for instantly shutting off pressure to the keg without backing up your gas line.

• Beware of cheap imitation! Only Beverage factory sells this regulator with the Kegco
• Dual Gauge regulator shows you working pressure and tank pressure
• Chrome plated brass body
• Manual pressure release valve and pressure adjustment knob
• Integral safety pressure relief valve releases at 45 psi

User questions & answers

Question:	Where can I get a compatible gauge protector
Answer:	Hi Joshua,Thank you for your question. This regulator does not have a pressure release valve. Please let us know if you have any further questions. Regards,StevieBeverage Factory800-710-9939
Question:	Is this regulator cheap in quality and will it continually leak co2 after one use
Answer:	I don't know exactly how the barb size is designated but the hose it connects to is 5/16" ID, 9/16" OD.
Question:	Is there a handle I can add to the hex knob to make it easier to adjust the output pressure? Right now I'm using a wrench
Answer:	Yes
Question:	Is there any way to add an additional regulator so that two different pressures can be set? http://www.amazon.com/gp/product/B003WXBD4O
Answer:	Yes it does

Product features

Convenient Design & Durable Brass Construction

Regulator body is constructed of forged brass with all brass connections and components. A large adjustment knob makes it easy to adjust pressure by hand.

Pressure Relief Valve & Shut-Off Valve

A tamper proof safety pressure relief valve releases at 45 psi and a shut off valve allows you to instantly shut off pressure to the keg without backing up gas line.

Top Gauge Measures CO2 Pressure in the Keg

This regulator features two clear, easy-to-read gauges. The top gauge measures the CO2 pressure in the keg and displays between 0 and 60 PSI.

Side Gauge Measures CO2 Volume in the Tank

The second gauge has a 0-2000 display that lets you know how much CO2 gas is left inside the CO2 tank, so you won't have to worry about running out unexpectedly.

Product description

This is a FERRODAY PROFESSIONAL GRADE dual gauge CO2 regulator used for draft beer setups, fits all standard CO2 tanks with CGA-320 inlets. Functioned flawlessly to control and monitor both the output pressure and the cylinder pressure at the same time. The high pressure gauge for cylinder reads between 0-3000 psi and the lower pressure gauge for output reads between 0-60 psi.





Features:

●Heavy duty unit for long term use;

●High-contrast writing for easy reading;

●Manual blow off release valve designed for safety concerns;

●Big ergonomic adjust knob for precise pressure adjustments;

●2 durable tank washers form a tight seal for leakage proof connection;

●Built-in Sintered brass inlet filter keeps harmful contaminants out of the regulator for safety!





Package:

1 x CO2 Regulator

2 x Tank Washer

2 x Clamp





Please! If any problems, we would try our best to serve you!

• 【Top Quality No Leaks】: FERRODAY lifetime CO2 keg pressure regulator features heavy duty forged brass body, exquisitely crafted tank washers and relief valve gasket to prevent any kinds of gas leakage!
• 【Easy to Adjust by Hand】: CO2 regulator has 2 control knobs, one adjustment knob enables more precise control even small adjustments, one shut-off knob allows instantly shut off without liquid backing up gas line, easy to turn.
• 【Lock Ring to Hold Your Setting & Big Gauges Clear view】: A lock ring under the big knob can firmly locked to hold your setting. Two Big gauges can accurately show the CO2 volume in cylinder and the output pressure to keg. FERRODAY keg regulator has crystal clear view for better experience!
• 【Relief Valve & Filter】: Safety first! A sintered metal filter in the stem keeps harmful contaminants out of the regulator. Customized manual relief valve releases pressure at 55-65 PSI each time for further adjustment and safety concern.
• 【Life Time Service】We are committed to offer you with high quality product as well as superior service! Please feel free to tell if any problem, we would try our best to satisfy you. Lifetime technical support.

User questions & answers

Question:	what size is the fitting that goes on the co2 tank
Answer:	Yes, it is.
Question:	I don't know how exactly to use this CO2 regulator. Is there a detailed instruction manual in the package
Answer:	Yes, the hoses are included
Question:	How to adjust the pressure release valve
Answer:	Yes, you have to, they don't come included with the regulator. I paired mine with a Cressi mini console.
Question:	Does this gauge tell u the pressure inside the c02 tank
Answer:	Mine had a yellow, plastic coated, braided hose (similar to air compressor hose) for the octo and a traditional rubber hose for the 2nd stage. Neither are very flexible. I eventually replaced them both with braided hoses.

Product description

The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

• Large easy adjusting knob to increase or decrease delivery pressure
• Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
• Outlet features shut-off with back flow check valve and 5/16" I.D. hose barb nipple
• Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
• Blow-off is factory set at 55-65 psig

User questions & answers

Question:	Can i use this for both soda and beer? is there a safety feature that would prevent me from using this for 2 very different psis at same time
Answer:	Yes, that's not a problem. You can run the co2 lines to whatever product you would like even if they are different. The separate dials allow for two pressures to be used for each line even if they are far apart. Thank you for your inquiry!
Question:	Is the threading compatable with a standard 5lb kegco co2 tank
Answer:	Hi Jason,Yes the threading is compatible with a standard 5lb kegco co2 tank.Thank you,ArielleBeverage Factory
Question:	Anyone knows the female thread size? The one that connects to the CO2 tank
Answer:	The regulator has a female connection to fit CGA320 threaded tanks
Question:	I am new with kegging. Using this regulator is it possible to carbonate 1 keg at a time? Then add a 2nd down the road when the beer is done
Answer:	You can carbonate 1 at a time, you can completely shut off the other regulator and not use it until you get another keg. If you have two kegs, you can carbonate 1, and serve the other at the same time. Or you can carbonate two at a time, or serve two at the same time. It's a very versatile setup.

Product description

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. You can use this low-pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure. The red polycarbonate bonnet will not chip, break or fade. There is a non-adjustable shut down built into the body of the regulator. The high-pressure ports have left-hand female threads to prevent their use as a low-pressure outlet. The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50psi, with a safety blow off at 60psi. Internal relief valve opens whenever delivery pressure exceeds set pressure by 15psi. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced. Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts. The permanent Quad-Ring Seal on the inlet nipple helps eliminate a source of leaks, so there is no need to use a new fiber washer each time the tank is changed. Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The duck bill check valve helps prevent product back up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16 inch I.D. pressure tubing. All regulators are pressure tested to assure in-field reliability. The seat assembly is easily replaceable, so there is no need to remove the regulator from the tank. Bullets change to: Low pressure gauge (the top gauge) indicates output pressure to the keg The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi High pressure gauge (the side gauge) indicates CO2 tank pressure remaining Duck bill check valve helps prevent product back up into the regulator Assembled and Tested in the USA

• Low pressure gauge (the top gauge) indicates output pressure to the keg
• The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi
• High pressure gauge (the side gauge) indicates CO2 tank pressure remaining
• Duck bill check valve helps prevent product back up into the regulator
• Assembled and Tested in the USA

User questions & answers

Question:	I just hooked this up to my system but gauges arent moving. is it possible co2 tank is empty? should i be doing anything special after hooking up
Answer:	Yes, ours did come with a pressure gauge.
Question:	Confused about the "mixed gas" description. i assume this will work with standard co2 tank? also, can secondaries be added at a later date
Answer:	Yes, ours did include the low-pressure hose for the BCD, as well as, the high-pressure hose for the pressure gauge and the other two low-pressure hoses for both second stage regulators.
Question:	Is there a pressure release valve
Answer:	No, ours does not have an integrated weight system.
Question:	Put the size of the barb on here
Answer:	I've used it as a second stage for my set-up for 5 years and never had it repaired. I've tested it below 100ft and it was easy breathing. It's a great buy. Have a great dive.

• DURABLE MATERIAL: Long-lasting durable brass components that will function for many years without rusting
• SPECIFICATIONS: 1.58" high pressure gauge: 0-4000 PSI. Flowmeter: 0-15 scfh. Inlet connection: cga-320
• APPLICATION: Perfect for indoor grow rooms, grow tents, green houses, and hydroponics to enhance the amount of carbon dioxide to the growing environment and speed up growth rates and yields by up to 40%.
• COMPONENTS :A precision regulator, flow gauge, and industrial solenoid valve, 5 meters free plastic dispensing tubing and USA standard 3-prong plug (Hose tail suit for 4.2 mm inside diameter hose. )
• MULTIPLE OPTIONS: This CO2 Regulator will allow you to maintain ideal CO2 levels for optimal growth

User questions & answers

Question:	I set the flow that 7 for my indoor veggies. the 20 lb co2 tank was empty after 36 hours. is this normal
Answer:	Return it. I got 2 defective units back to back.
Question:	How do you read the chart? It seems backwards. For example if you need 1 cfph set flow meter to 7, but if you need 5 cfph set the flow meter to
Answer:	Mine looks the same.
Question:	Do these units act as a back flow preventive device
Answer:	Oval-shaped w temp display in front
Question:	How do i adjust the co2 flow. The ball goes all the way to the top when my controller opens the solenoid. I did not get a operation manual with the co
Answer:	The thermostat on my heater is very sensitive too. I just set it a bit lower than I need and it usually stays where I want it. It has to do with the outside temp of the tank.

Product features

VIVOSUN Hydroponics CO2 Regulator

This VIVOSUN CO2 regulator can be specially used in grow rooms, grow tents, green houses, aquariums, and other places. CO2 is essential to photosynthesis and is often the most overlooked element limiting plant growing. Growing plants with hydroponics requires up to 5 times the amount of CO2 than naturally occurs in the air. Fertilizing the air with CO2 will shorten your growing time and double your harvest yield if done correctly.

Parameters:

Flowmeter: 0-15 scfh

Inlet connection: cga-320

Plastic Tubing: 5 Meters

Hose tail: suit for 4.2 mm inside diameter hose

Solenoid valve

1.58" high pressure gauge

Volts: 110 Volts

USA standard plug

Pressure Gauge

Measure the amount of CO2 being pushed through your system

Easy to Control

Turn the CO2 tank valve to "OFF" when attaching or detaching the CO2 regulator

High-Quality Solenoid Valve

Attach your hose here and thread it throughout your system

Product description

WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND REPRODUCTIVE HARM. FOR MORE INFORMATION PLEASE VISIT: WWW.PROP65WARNINGS.CA.GOV Robust design delivers performance and reliability. Extremely durable and user friendly polycarbonate bonnets make adjustments a snap. Pull cap to adjust the pressure and push back to lock it in. High CO2 volumetric flow provides continuity in product dispensing. This primary regulator connects directly to its gas source so it's ready to rock. Recommended operating pressure should be limited to 2/3 of the gauge range for maximum accuracy. UL approved per UL252 Class IV rating for CO2. Polycarbonate bonnet will not chip, break or fade. 10 micron filter built in to keep contaminants out of regulators are used throughout the beverage industry. This regulator is the most consistently accurate and well built regulator on the market. This unit stays on pressure even when your CO2 tank level does down. Approved for use by all major beer distributors and Breweries. Shutoff Valve is a ball Type check Valve that prevents product back-flow into the regulator and tank. Solid Brass with extra long nipple. Regulator has pressure safety system (burst at 55 to 60 psi). permanent Quad ring seal on Inlet nipple helps eliminate a source of leaks. no need to use a new fiber washer each time tank is changed. Regulator will be double boxed to avoid any damage in transit

User questions & answers

Question:	Does it come pre assembled
Answer:	This is for any size aquarium. You adjust the flow of CO2 (usually counted in "bubbles per second") based on the volume of water and plant density. You do have to buy the correct sized diffuser to support your tank.
Question:	Hi,Now have tank, regulator, gasline assembly w/ball lock and a carbonator but don't know what to do now. How do I hook into the sodastream w/this
Answer:	Seems to be steel (soft metal) the wrench that comes with this does scratch/tear metal collar that’s screws onto the bottle
Question:	Does this come with a 1/4" or a 5/16" barb? Thanks
Answer:	Make sure the valve on the tank is open. If none of the gauges are moving there is no pressure getting to the valves. An empty co2 cylinder could also be the cause.
Question:	Is this Made in USA
Answer:	Hello David,Yes, this will work with a standard C02 tank and that is the most common tank that mixed/beer gas comes in. This is an excellent choice for a primary, if you plan to run secondary regulators because of the high pressure ability. AnthonyThe Beverage Factory

Product description

The SPARC 2 Stage CO2 Regulator is specifically designed for simultaneous use with 2 draft beer/kombucha setups (kegs or fermentation tanks). This CO2 regulator is equipped with 3 gauges: 1 for the working pressure in your 1st keg or fermentation tank, 1 for the working pressure in your 2nd keg or fermentation tank, as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knobs on the regulator lets you adjust the working pressure without any additional tools in each individual kegs/fermentation tanks. Fully polished finish for easy cleaning and great aesthetics! Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail.

• EASY INSTALLATION ✔ All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal.
• PROFESSIONAL GRADE ✔ This CO2 regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure on both outputs via individual control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety pressure relief valve (PRV) / and individual shutoff valves on each output.
• VERSATILE APPLICATIONS ✔ Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fittings allow for easy connection to many gas line types.
• HEAVY DUTY WITH TRIPLE GAUGES ✔ SPARC 2 Stage CO2 Pressure Regulators are a heavy duty piece made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure.
• WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail.

• 🍺 Gas Manifold, A built-in check valve protects your shunt and prevents gas backflow.
• 🍺 Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.)
• 🍺 Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
• 🍺 There is a 2-point screw hole on the top for easy installation to other equipment. 5/16" barbed inlet and 5/16" barbed outlets.
• 🍺 Made of aluminum, brass and stainless steel material, it is extremely durable. 24 hours a day after-sales customers service, please contact us for any questions.

User questions & answers

Question:	Can I switch the plug on the left with the input barb? It's based on the brewery's configuration, or should I just install it with the outputs up
Answer:	I keep it at 2 if im leaving it plugged in all the time. If you plug it into a controler that probes the air then i set it for 5. Alot of this has to do with your size space. You can just set it on a timer as well and just make it intermittent release
Question:	What size are tge barbs
Answer:	I dont believe so. Its simply designed to release a steady flow of pressure
Question:	Can you use to this for distributing nitrogen as well
Answer:	When the ball floats to the very top, the valve is all the way open, to ajust the valve there is a black knob you can turn, one way will shut it all the way off, one way will be closed, it is very sensitive when you find the right spot to get the ball floating around 7 to 10. Good luck

Product features

Gas Manifold for building a kegerator is indispensable.

The 3-way draft manifold allows you to distribute CO2 flow to any 3 kegs in your beer system that require the same pressure. The manifold connects to the primary regulator, which sends a pressurized flow of CO2 through a gas hose to the manifold. The manifold then distributes that CO2 evenly among the kegs, and each line has a shut-off valve so you can halt the flow to a particular keg as you needed.

3 Way CO2 Manifold, Professional Beer Making Brewing Tool

Features:

1. Made of solid stainless steel, aluminum;

2. Built-in check valves for each line, prevents gas back flow;

3. Independent shut off valves, easily control the flow;

4. Extremely Durable and easy operate, Barbed specifications: 7mm;

5. With 2-point screw hole on the top for easy install wherever is convenient to you.

6. Package: 1 x 3 way Gas Manifold;

Product description

Talos USA Single Gauge CO2 Draft Beer Regulator has an ultra-premium polished design for aesthetics, but isn't only limited to looks. The functionality of every product designed by Talos is uncanny. What sets us apart from our competitors is we aren't only a retailer. We are also the manufacturer so we strive to constantly improve our products. This single gauge regulator is designed for one keg of beer to be dispensed at a time. The design of the knobs and handles are ergonomic for efficiency and stability. Our gauge indicates the level of pressure inside the keg and for a safety precaution it's designed with a manual pressure release valve as well as an internal relief valve that allows pressure to be released at 70-86 PSI. You can count on Talos for durability and reliability.

• 【SUPERIOR QUALITY WITH TALOS & PRESSURE YOU WANT】TALOS commercial grade keg CO2 Regulator features a multi-stage body for more precise control when making small adjustments to the output pressure. You can adjust quickly the regulator and maintain steady Co2 pressure.
• 【DEDICATED TO DRAFT QUALITY & DURABLE CONSTRUCTION】Professional Co2 Regulator from TALOS features a heavy-duty forged brass body, constructed of forged premium brass with all brass connections and components. 
• 【EXCELLENT PRESSURE SETTING AT ANY TIME】Compression Dial is built with a high strength PC material to ensure safety is accidentally dropped. Pressure display will accurately display without any ”jitter"
• 【PROFESSIONAL SECURITY GRADE & NO LEAKS】Safety pressure relief is built-in for a stable output. When pressure exceeds the designated pressure level it will automatically relieve pressure from the device.  Always place a washer between the lock-down nut and the tank to ensure a tight seal. Exquisite relief valve gasket prevents any kinds of gas leakage!
• 【EASY INSTALLATION & COMMERCIAL GRADE】All you need to install this beer keg regulator is an adjustable wrench. TALOS CO2 Regulator is designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants.

User questions & answers

Question:	how to adjust pressure in either gauge
Answer:	Hi The barb and plug of this Gas Manifold can be switched. Use Teflon tape or thread locker to ensure an airtight connection. Please test after switching.
Question:	How can you tell if the co2 tank has a zinc bonnet, or a poly bonnet
Answer:	CO2 Distributor Manifold is 5/16 inch Bar.
Question:	are the stop valve check stops? It can beer get back into the regulator from the keg
Answer:	I don’t see why not it works great for CO2
Question:	Hi, if i need to install this secondary regulator, i need a primary
Answer:	No its not. Normally my 20Ib will laat 2-3 weeks in a 4x8 tent set to 1200 PPM. Do you have it connected to a Co2 controller? And is your setup air tight or do you have exhaust fans constantly pulling all the co2 out?

Product description

Pkbrtp50 5 beer dispenser

• 64OZ VOLUME CAPACITY: Includes metal screw on lid cap for easy portable transportation and storage. Its 13.4” height fits in your home fridge or kegerator. The barrel is the same volume as traditional growlers and is laser marked at the fill level
• KEEPS YOUR BEER FRESH: Traditional growler kegs will let carbonated drink go flat after the first pour but not this mini growler set, as it will keep beer vacuum pressured and fresh for up to 2 months. Perfect for any homebrew or craft draught beer
• STAINLESS STEEL MATERIAL: Each of the accessories in the tap dispenser kit is constructed with S/S 304 stainless steel. Tap faucet handle is just pouring draft brew from a kegerator. Pressure release valve allows safe removal of the tap hardware
• WORKS W/ DISPOSABLE CO2: Not included - Each Co2 cartridge will pump around 128oz of beer before going empty. Screw universal threaded 16g CO2 gas cartridges into the regulator to supply pressurized carbonation to your keg brewing system
• UPGRADED REGULATOR: Monitor the current PSI of the 0.5-gallon tank mini keg growler from the regulator gauge and fine-tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. Add the insulator sleeve to keep beer cooler

User questions & answers

Question:	What is the purpose of the plastic tube being so long
Answer:	The size is 6.7CM long, one bigger tip is 2.2CM, another smaller tip is 1.7CM, and the threading size is 3/8-16UNF. Thank you.
Question:	I bought this as a gift for someone, but they lost the hex cap it came with and now they can't get it filled. Where can I find a replacement? Thanks
Answer:	Unfortunately, we are currently out of stock of the replacement of this unit but you can reach back to us after a month or two for the availability. Thank you.
Question:	What else is needed in order to drink beer
Answer:	Hi, you need a co2 cartridge for this unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PKBRTP50 for more details. Thank you.
Question:	Can you force carbonate wine to make a sparkling wine with this
Answer:	Yes you can use this for wine, but the wine won't be as carbonated as you probably might like. It will not have the same carbonation as say a D'asti type wine unless the wine is already carbonated. The CO2 here is meant really only for pressurization for dispensing and maybe maintaining carbonation but not necessarily for carbonating the beverage.

Product features

Pressurized Beer Mini Keg System

Nutrichef lets you create larger than life memories by providing kitchen equipment that perfectly suits every household.

Product description

Kegconnection offers this replacement 0-2000 PSI gauge for regulators that required left hand thread on high pressure side. This gauge already comes with plumbers tape installed at the factory, so it is ready to install, just screw on your regulator!

• 0-2000 PSI replacement gauge for a regulator requiring a left handed thread
• 0-2000 replacement gauge for regulators that required left hand thread on high pressure side.
• gauge already comes with plumbers tape
• Shipping rate is for the Continental US ONLY.

User questions & answers

Question:	Will this work on a Danby co2 gauge for kegerator
Answer:	It doesn't really matter, you want to turn that screw (zinc) or knob (poly) in the dead center of the regulator assembly counterclockwise before you install the regulator. That screw in the center is what keeps the gas surging thru the dials. once it's installed on the tank you turn it clockwise to open check for leaks and do whatever the instructions tell you.
Question:	Do they sell one with the threads on the other side of the gauge
Answer:	No, there’s a one way valve between the keg adapter and air line
Question:	thread size? I saw another pressure gauge that is 1/4 inch. I need 1/2 inch
Answer:	I ordered a primary for these secondary regulators. yes you need a primary to connect from your main co2 bulk tank to your primary then to secondary and then to fermentors or brite tanks. hope this helps.

Product description

(WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND REPRODUCTIVE HARM. FOR MORE INFORMATION PLEASE VISIT: WWW.PROP65WARNINGS.CA.GOV) Primary Beer Regulator, 1P1P, CGA320 Inlet, 5/16\\" Barb Shut off w/Check, 60 PSI and 2000 PSI Gauges

• Primary Beer Regulator for Home Dispense.
• CO2 regulator has 2 gauges, a 1/4 barbed shutoff valve, and pressure relief valve.
• Includes a washer and is ready to attach to a CO2 tank.
• 1P1P, CGA320 inlet, 5/16" Barb Shutoff, 60 lb and 2000 lb gauges.

User questions & answers

Question:	Is the barb removable
Answer:	The shutoff fitting with barb is removable, it has 1/4" npt pipe threads. While it can be removed, any alteration to the product does void the manufacturers warranty.
Question:	I purchased a duel kegorator for hubby and read that it may be best to change the single regulator that it comes with to this duel...should I
Answer:	This is a great regulator so sure but he will need a way to hook up co2 to 2 kegs so either get a y splitter for this, a 2 co2 distribution block or the dual body taprite
Question:	For a nitrogen draft beer dispensing, are these regulators safe (food grade)? Can you use any nitrogen regulator, or is there such a rating as food gr
Answer:	You can use any regulator that's made to distribute nitrogen and will fit your equipment. Contact time with the regulator is nonexistent. If you want food grade then the gas you buy has to be rated for the food industry.
Question:	Will this screw onto a 20 oz tank typically used for paintball guns? Or will I need an adapter
Answer:	You will need an adapter at attach a paintball tank. Please feel free to contact us at 877-909-BREW(please leave a message) if you have any other questions or would like to inquire about having both parts shipped together. Thank you