11 best vented propane heaters

Product description

The DVAG11L Direct Vent Wall Heater from Ashley Hearth Products makes the perfect solution for zoned heating. The space saving direct vent furnace design mounts to an exterior wall and the adjustable vent assembly adjusts to fit walls from 4-1/2 inches to 10 inches thick. For clean, comfortable heat when and where you want it, the gas flame is completely sealed inside, away from all contact with room air. Air necessary for combustion is drawn into the chamber from outside through the vent and combustion products are vented directly to the outside. Only clean, gentle heat, in continuous circulation is delivered into the room. Windows and doors stay closed because no room air is used for combustion. The DVAG11L direct vent propane wall furnace is designed to heat up to heat up to 375 Sq. Ft. and has an 11,000 BTU input.

• 11,000 BTU heat input heats up to 375 sq. ft.
• Designed for use with liquid propane gas
• Sealed burn system is perfect for bedrooms and living spaces
• Matchless Piezo lighting for quick starts
• No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod)
• Approved for use in mobile or modular homes

User questions & answers

Question:	Does this have a kit for high altitude use? My place is at 7500 feet
Answer:	Yes you can purchase multiple packs if you like but one battery lasts 8-10 hrs
Question:	what is the approximate fuel consumption rate? On low? On high? thank you
Answer:	This unit is AC/DC. You can use this in your vehicle, tent or cabin without electricity. It also has a port to charge any device that uses a micro USB. It also works 360 degrees unlike the other units that are directional.
Question:	Would this work well in an RV? with 12v power and 20lb propane tanks
Answer:	There is no visible light from the screened areas. The power on leds are not bright enough to be seen and would not interfere with night hunting.
Question:	How do get to main burner
Answer:	No ours did not

Product description

The DVAG17L from Ashley Hearth Products makes the perfect solution for zoned heating. The space saving direct vent furnace design mounts to an exterior wall and the adjustable vent assembly adjusts to fit walls from 4-1/2 inches to 10 inches thick. For clean, comfortable heat when and where you want it, the gas flame is completely sealed inside, away from all contact with room air. Air necessary for combustion is drawn into the chamber from outside through the vent and combustion products are vented directly to the outside. Only clean, gentle heat, in continuous circulation is delivered into the room. Windows and doors stay closed because no room air is used for combustion. The DVAG17L furnace is designed to heat up to heat up to 570 Sq. Ft. and has an 17,000 BTU input.

• 17,000 BTU heat input heats up to 570 sq. ft.
• Designed for use with liquid propane gas
• Sealed burn system is perfect for bedrooms and living spaces
• Matchless Piezo lighting for quick starts
• No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod)
• Approved for use in mobile or modular homes

User questions & answers

Question:	Does it require electricity to operate
Answer:	No vents
Question:	Is this a pipe within a pipe for exhaust and combustion air ? Exhaust thru the inner pipe and combustion air thru the outside pipe
Answer:	Table Dimensions: 27.6"(L) x 27.6"(W) x 36.2"(H),Table weight:32.8 lbs.
Question:	So if there is no fan what allows the fresh air to come in through this heater and what is making the exhaust expell out the duct
Answer:	The hardware included in the packing. It was easy to assemble.
Question:	Does this unit have a fan
Answer:	Powder coated steel frame is anti-rust design

Product description

If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 50,000 BTU Natural Gas Unit heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self-diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater.

• 50,000 BTU per hour heats up to 1250 sq. ft.
• Powered exhaust allows for vertical or horizontal venting
• Easy outside access to thermostat and A/C terminals and gas connection
• Natural Gas to Liquid Propane conversion kit and 2 angle brackets for ceiling mount included
• Minimum 8 ft clearance from floor to base of heater required; Limited 3 year warranty on parts and burners and 10 year warranty on any defects in the heat exchanger

User questions & answers

Question:	Can this unit be installed through a cut out in the celing so it points down towards the floor while having the majority of the unit in the attic
Answer:	Highly unlikely. The louvers on the front that direct air flow have maybe 45 degrees of downward angle. This just seems like a bad idea
Question:	does it smell when running
Answer:	not after initial burn period .Very quiet compared to my last heater ,does not smell .
Question:	Can it run on a propane tank for a gas grill
Answer:	This heater can run on a gas grill propane tank. Make sure the propane conversation kit has been installed and then you'll need to use a grill hose that has the regulator on it. Then you'll have to change the fitting after the regulator.
Question:	One description says heats 700 sq ft another says 1250. Which is it
Answer:	It heats my 900 sq. ft garage nicely.

Product description

North America's Most Popular Portable Propane Heater! This patented radiant 4,000-9,000 BTU Liquid Propane heater connects directly to a 1 lb. cylinder and is the perfect solution for heating enclosed spaces like large tents up to 200 sq. ft. The expertly engineered size to BTU ratio is augmented with a fold down handle to give this heater maximum output while retaining a minimalistic footprint. A swivel regulator gives you the ability to adapt usage from a disposable cylinder to a remote gas supply with the purchase of a hose and filter. To light the unit, simply rotate the knob to pilot and push. Then the integrated Piezo sparking mechanism will take care of the rest. With the Oxygen Depletion Sensor (ODS) and accidental tip-over safety shut-off you can be sure that you will enjoy years of comfortable indoor safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND MASSACHUSETTS* **Please note when operating the heater at altitudes over 7,000 FT above sea level the heater may shut off. Use- Emergency Heat, Tents, Campers, Workshops, Job Sites, Porches, Patios, Decks, Garages, Storage Buildings, Picnics, Tailgate Parties, Construction Trailers, Sporting Events, Barns, Sheds, Hunting Blinds, Shelters, Ice Fishing Shanties

• Steel, Plastic, Nickel
• Imported
• 4,000- to 9,000-BTU radiant heater for spaces up to 225 square feet. Approved for indoor/outdoor use; clean-burning; nearly 100-percent efficient
• When operating the heater at altitudes over 7,000 FT above sea level the heater may shut off.
• Auto shut-off if tipped over, if pilot light goes out, or if detects low oxygen levels. Fuel Consumption/Burn Rate (Gal/Hr) at 4000 BTU = 0.044 Gal/Hr, at 9000 BTU = 0.099 Gal/Hr
• Fold-down handle; swivel-out regulator; connects to propane tank (not included); Run Time (Hrs at Max BTU): 3 Hours
• THE USE OF UN-AUTHORIZED ACCESSORIES/ATTACHMENTS WITH THIS HEATER ARE EXPRESSLY PROHIBITED, MAY CAUSE SERIOUS INJURY, AND WILL VOID THE WARRANTY.

User questions & answers

Question:	Can I store the smaller, 1lb propane tanks on my terrace porch, possibly in a box, overall? in cold winters and hot summers
Answer:	For maximum safety, my recommendation is to store propane containers in a weather protected location, such as garage or shed with some natural ventilation. Propane is a highly flammable liquified petroleum gas that vaporizes and expands many-fold very quickly if released to atmospheric pressure, and will form a highly explosive mixture if released in a confined space without outside ventilation. If then ignited by a small spark such as a light switch, the resulting explosion may be catastrophic. There are on-line photos of boats that have exploded from propane leaks in the confined space of a boat cabin with catastrophic results including death of occupants. The cabin top and sides have literally been blown to pieces in such cases. New, sealed bottles of 1 lb size are reasonably safe, but once opened or partly used it is best to store away from occupied spaces. Although the probability is low, the consequences of failure are unacceptable. 20 lb propane containers should never be stored indoors. Play it extra safe and store propane bottles in a garage or outdoor shed. BJG (PE, ichemical engineer, inactive, retired)
Question:	can i hook a large propane tank to his
Answer:	Yes, any size propane tank can be a source for it when plumbed correctly. The simplest way to go is using the F273704 hose directly off most tanks. That hose needs nothing else and goes direct from the tank to the heater. This model heater only accepts high pressure gas thru the "disposable tank" connection, so other hoses with that connection can be used as well as the "filter" F273699. The "filter" is to take out oils coming from most rubbers in hoses where the high pressure "squeezes" the oil out, but the 704 hose is made "oil-free" to avoid that issue. FYI I tried running this off a regulated low pressure source, but with it on "high" the glow was like "low" setting normally (showing a lack of gas coming thru). So if you have a low pressure source, the "Big Buddy" models have a connection point for such thru a quick disconnect using hoses like F271802 or F271803, but not this model (this one needs high pressure gas to get enough thru it's disposable tank port).
Question:	How long with the heater run on low with a propane small cannister
Answer:	Best guess is 4-5 hours on low. I sat in a hunting blind for 2.5 hours and the 1lb propane canister was about half empty.
Question:	Does anyone know or understand how is it this type of propane heater can be used indoors without causing carbon dioxide poisoning
Answer:	As soon as the weather gets cold, I put my Big Buddy Heater on a stand & use a Mr. Heater 12' hose with regulator running to a 20lb. tank in living room. I use the hose with the low pressure regulator on it & hook it up to the quick connect fitting. I have 2 20lb tanks in mint condition, and rotate them as needed. This will be my 7th winter using it. Old windows & doors let air in and I have a carbon monoxide alarm near by. Also use a leak detector to check all connections after hooking up a full tank. If it's really cold, I'll start it on high for a short time, then run it on medium & it keeps living & dining room warm. Cuts my oil bill down greatly.

Product description

If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 80,000 BTU Natural Gas Unit heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater.

• Your purchase includes One Mr. Heater Big Maxx Natural Gas Heater with 2 angle brackets & Liquid Propane conversion kit | Thermostat, hose & regulator not included
• Heater dimensions – 29.33” L x 15.50” W x 26.37” H | Coverage area – 2000 Sq. Ft. | Performance – 80,000 BTU | Amps – 2.3 | Voltage – 120 V | Min 8 ft. clearance from floor to base of unit
• For use with natural gas | Category 1 vertical, category 3 horizontal venting
• Powered exhaust allows for vertical or horizontal venting | Spark ignition features self-diagnostic control module
• This heater offers the operating versatility and safety that you have come to expect from Mr. Heater | Limited 3 year warranty on parts and burners

User questions & answers

Question:	the Mr heater come with the vent kit
Answer:	Nope cheaper at lowes. Comes with thermostat for $480
Question:	Does it require a high or low voltage thermostat
Answer:	This uses a low voltage thermostat.
Question:	Only $489.00 at Lowes, why more expensive here
Answer:	$469 at Lowes :)
Question:	Will this be enough for an insulated 30x30 shop with a 14 ft Ceiling
Answer:	We just had our heater installed in our 12 x 20 garage and the ceiling height is probably 7 ft. We have it set at 55. I am sure this would more than heat your area. My installer told me that I could of used a smaller unit. Hope this helps you. We love ours.

Product features

Mr. Heater F260560 Big Maxx MHU80NG Natural Gas Unit Heater

Description:

If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source.This 80,000 BTU Natural Gas Unit heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas.These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch.

• Category 1 vertical, category 3 horizontal venting
• Natural Gas to Liquid Propane conversion kit included
• Thermostat sold separately

Product description

' Gas Fired Room Heater, Gas Type LP, BtuH Input 35, 000, BtuH Output 24, 500, Vent 4 In., Height 26 In., Width 37 In., Depth 18-3/8 In., Vent Type B, Ignition System Piezo Spark to Standing Pilot, Pipe Size Supply 1/2 In., Equipped With Hydraulic Thermostat, Safety Features Automatic Shutoff of Main and Pilot Gas, Features Enclosed Front, Floor to Center of Vent 18-3/16 In., Manufacturers Warranty Length 10 yr. Combustion Chamber, Limited 1 yr. Parts, Standards CSA '

• Optional internal blower available separately for purchase for added circulation (Empire Model #DRB1)
• 35,000 Btu/Standing Pilot
• Hydraulic Thermostat
• Dimensions: 26" (H) x 37" (W) x 15.5" (D)
• 4" Flue Collar

User questions & answers

Question:	does this unit come with the blower for this price
Answer:	square feet not cubic
Question:	I am unable to get the pilot to relight...any suggestions
Answer:	Depends on the thickness of the wall. Notice the louvers on the side.
Question:	Is this unit able to be vented out the back
Answer:	There is one cover per package.

Product description

The T-H3-DV-N is well suited for residential/ commercial applications such as small restaurants and beauty salons. Complies with Ultra-Low NOx regulations. Utilizing commercial grade copper alloy for the heat exchanger tubing, the T-H3 is also suitable for heavier residential usages such as space heating or domestic recirculation systems. Certified up to 10,100 ft. altitude. With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

From the Manufacturer

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

• Endless hot water, On-demand usage, Compact, Space saving, Energy conservation
• Computerized safety features, No pilot light to have to worry about
• Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes
• Satisfies the 2012 SCAQMD Rule 1146.2 for Ultra-Low NOx Emissions
• Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel, Integrated controls and power cord as standard features

User questions & answers

Question:	My plumber is looking for the exhaust venting for this tankless hot water heater.. Pipe for exhaust, 90 degree iPod, gasget? Help
Answer:	The exhaust pipe in the manual is this one https://www.amazon.com/gp/product/B00ED10Y6C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Question:	Will this suffice for a 4 bathroom home in Dallas? Looking at temperature rise of ~45 degrees (110 desired minus 65 groundwater temperature
Answer:	It's 10 gal/min... if you have a shower that is NOT a water saver and uses 6 gal/min... someone is going to miss out, no problem on the 45 deg rise, but we find that 130 deg is more desirable and still no problem in Albuquerque where the water temp MAY go into the 30s but most likely not less than about 45... HTH
Question:	Where is it manufactured
Answer:	JAPAN by one of the best hot water heater manufacturers in the world. Few if any can compair with Takagi, IMHO! Best unit I have ever installed, bar-none!
Question:	what does "condensing" mean in this case
Answer:	I can't stop laughing after reading the answers + there are 11 people with less clue who found the "explanations" useful... Guys, please allow me to explain the process: The condensation units have a secondary heat exchanger which takes the exhaust from regular 80% efficiency and "works" the water again in order to heat it even more, while cooling down the exhaust. Doing so the exhaust will be cool and it will condensate. This condensed exhaust will run down the vent and is gathered in an internal tray from where it goes to the condensation drain. Under NO CIRCUMSTANCES is the condensed exhaust in contact with your hot (or cold) water. By re-using your exhaust (hot), the efficiency will show on paper an additional 15% -17% added to the standard 80% of a conventional water heater.

Product description

This Blue Flame 30,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**

• 30,000 BTU Liquid Propane heater to heat spaces up to 750 square feet. Restricted in Canada
• Blue flame burner for even convection heat. Supplemental heat in cold rooms, Additions, Sun rooms, Cabins
• Automatic low oxygen shut-off system (ODS). CSA Certified. Fuel Consumption/Burn Rate (Gal/Hr) - 1.389 lbs/hr
• Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
• Theromostat, legs and wall mounting hardware included.Fuel Consumption/Burn Rate (Gal/Hr)

User questions & answers

Question:	How long will 20lb propaine last on lowest setting in insulated room
Answer:	Say a 10' x 10' room; about 12 to 16 hours. You MUST have some fresh air coming into the room or the O2 depletion will shut the heater off. Propane need air to burn just like most flames.
Question:	Is this safe in a 300 square foot cabin as the sole source of heat
Answer:	This is very large for a room of that size. I would recommend the 20,000 BTU model. That is ASIN B01DPZ5B3. These are designed as supplemental heat but it could be used for your application.
Question:	Does this product have built in regulator
Answer:	You must use an external regulator. You need some other hardware if you are going to use it on the floor. Here is what you need: ASIN:B0002YPAFY Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant, ASIN:B0058DIGPU Anvil 8700137808, Steel Pipe Fitting, Nipple, 3/8" NPT Male x 4" Length, Black Finish, ASIN:B005R21QLS Mr. Heater 12-Feet Hose/Regulator Assembly, P.O.L. and Hand Wheel x 3/8-Inch Female Pipe Thread. If your heater did not include an elbow, get a 3/8" ASIN:B005C2U67I Anvil Malleable Iron Pipe Fitting, Class 150, 90 Degree Street Elbow, NPT Male x NPT Female, Black Finish. Put sealant on the outside threads only. Screw the elbow into the heater so that the opening faces the front of the heater. Screw the nipple into the elbow. Attach the feet that came with the heater. Screw the hose onto the nipple. Attach the other end of the hose to your propane tank. Check all connections with soapy water before lighting.
Question:	Will this burn in high elevation
Answer:	Yes as long as there is enough oxygen. Oxygen above 12000 feet altitude becomes thin and supports combustion less efficiently.

Product features

Blue Flame Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and infrared (or radiant heat). The difference in these types of heat are how the warm.

The Blue Flame heater warms the air. It doesn’t radiate the heat like an infrared unit. It can be put in a narrow area because the heat rises and warms the area from the ceiling down. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Product description

This Blue Flame 20,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**

• 20,000 BTU Liquid Propane heater to heat spaces up to 700 square feet
• Blue flame burner for even convection heat. Run Time (Hrs at Max BTU)- 21.59. Fuel Consumption/Burn Rate (Gal/Hr)- .926 lbs/hr
• Automatic low oxygen shut-off system (ODS). CSA Certified
• Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
• Theromostat, legs and wall mounting hardware included

User questions & answers

Question:	It warns against using in elevations higher than 4,500 FT. Have you had success at
Answer:	Yes, there have been units with success over 4,500 ft, what this means is we aren't able to guarantee successful operation of these heaters are higher than 4,500 ft.
Question:	How many hours or days will it run with a 20# bottle
Answer:	I recently insulated a 14’ x 20‘ workshop attachment on my garage. I got this heater and before I bought a big tank I tried it on a 10 pound tank from my grill. It was set on number one setting the temperature outside was in the 30s and I got 64 hours out of it holding just over 60°. So I figure a 20 pound bottle should last me little over five days. So I’m going to get a 30 pound bottle that way I only have to refill about once a week. Warmer weather less often, I hope this helps.
Question:	It dont tell the dimensions? Is it 20" wide
Answer:	The dimensions for the heater are 23 3/4" W x 11 1/4" D x 27" H.
Question:	Can u use propane tank from a grill and how long would it last
Answer:	Quick math says about 17 hrs on full tank. This heater has a high and low output, controlled by the thermostat, not the user. One gallon propane would last approx 4 hours. A full 20 lb tank holds about 4.5 gallons.
Question:	how long does it last on a small propane tank
Answer:	The 1# tank will ice up and slowly turn off the heater on anything but the lowest setting. That lasts about 2 hours. A little buddy heater with 4K/9K Btu works best with the 1# cylinders. I have the hose hookup for a 20# tank and it's nice to have the option of using either size. You have to light this one with a lighter which is just another thing to forget to pack.
Question:	Just tried to make coffee on it and the grill started to collapse is there a sturdier grill for it
Answer:	As far as I know... No. A simular thing happened to me. I reattached the grill using good old fashioned wire hanger twisted. This was only a temporary fix.
Question:	Did anyone get the "foot" for the 1 lb. bottles and is it a worthwhile add-on
Answer:	Not sure what you're referring to. The one lb. bottle hangs suspended when connected. I wouldn't recommend getting this model. Get the model MH12C if you can. The regulator broke after a couple months and I couldn't return it. Instead I bought the regulator that was for the MH12C and adapted it to fit the MH15C. Since then it's been working great for a year. I also recommend purchasing the hose adapter so you can run off a 20 lb. bottle. It'll last a lot longer
Question:	how long does a 1lb bottle last compared to a 20lb bottle
Answer:	A one pound bottle on medium setting will last about 1-1/2 hour so figure at least 25 hrs for a 20 pounder.

Product features

Blue Flame Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and infrared (or radiant heat). The difference in these types of heat are how the warm.

The Blue Flame heater warms the air. It doesn’t radiate the heat like an infrared unit. It can be put in a narrow area because the heat rises and warms the area from the ceiling down. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Product description

ProCom's Infrared Plaque Ventless Gas Space Heaters make supplemental heating fast and easy! Just push a button for easy ignition, stand back and enjoy a great source of dependable, affordable heat. These infrared plaque heaters works just like the sun's radiant heat, warming objects in the room first! Product Features 6,000 Maximum BTU Heats Up To 150 Sq. Ft. Operates off Liquid Propane Gas Only Manual Control – On/Off Settings Space saving design without sacrificing beauty Economical: 99.9% efficient. No outside duct or chimney needed! Heat for only pennies an hour Safety Assurance: O.D.S. (Oxygen Depletion Sensor) included with automatic shut-off No electricity required! Push button Piezo ignition Wall mounting bracket included CSA certified Product Dimensions: 19 1/8” H x 14 1/8” W x 6 3/8” D

• Liquid propane Gas infrared wall heater operates at 6,000 BTU
• Heater Uses liquid propane Gas and is vent-free
• Equipped with manual controls and push button piezo ignition
• Comes with a cool touch cabinet and can easily accommodate a 150 sq. Ft. Space
• Infrared heat warms People and objects in the room first, and operates similarly to the sun's radiant heat

User questions & answers

Question:	is the heater quite
Answer:	A one pound bottle on medium setting will last about 1-1/2 hour so figure at least 25 hrs for a 20 pounder.
Question:	Do you know if this heater has a blower
Answer:	No, this is a window unit and should not be installed into a wall.
Question:	How many BTUs
Answer:	Yes it will switch by itself if you set both settings on automatic! I love this unit it has saved us a lot on our electric bill!
Question:	I notice the ad says 'Natural' gas. Just what does that mean? Can I use gas that comes in a portable cylinder? I guess you would call it 'Propane
Answer:	UPDATED. The air flow sections move side to side and up and down. InstalLatin was not so simple. Instructions are not publised well. Now that installed it cools amazingly. Veryy pleased with this product.

Product features

ProCom Liquid Propane Gas Ventless Plaque Heater - 6,000 BTU, Model - ML060HPA

Infrared Plaque Ventless Liquid Propane Gas Space Heaters make supplemental heating fast and easy! Just push a button for easy ignition, stand back and enjoy a great source of dependable, affordable heat. These infrared plaque heaters works just like the sun's radiant heat, warming objects in the room first!

Infrared Heating

Infrared Flame Technology provides heat similar to the sun's radiant heat , providing a comfortable and affordable heating source.

Controls

Manual Control with On/Off Settings. Just push a button for easy ignition, stand back and enjoy a great source of dependable,affordable heat.

Wall Mounting

Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.

Safety

Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.

Product description

This flexible, vent free fan convector is the perfect solution for rooms and spaces that are hard to heat. Professional Installation Recommended – call 833-746-6212 for assistance.

• Uses propane gas
• Electric ignition and digital display with programmable temperature and time settings
• Cabinet is cool to the touch
• Onboard self-diagnostics for easier maintenance
• Features a tilt switch to disable the gas supply, child locks, and self-diagnostics allows for easier maintenance

User questions & answers

Question:	can you use 5/8 propane pipe or do you have to use 1/2 inch? I have a bunch of 5/8 inch and wanted to use it
Answer:	Not sure what you mean by damper piece. It just a box with holes with vents on the sides.
Question:	Is the hook up kit (hose) shown in frequently bought together necessary
Answer:	NO it doesn't make any noise at all worked out great for me plus it was easy to install.
Question:	What is the btu rating of the fc824p heater
Answer:	I use this grill to cover my swamp cooler output so the cooler pads stop any dirt from coming into the house.
Question:	We have been researching the rinnai fc824p are there sea level specifications we need to be concerned about we are at 4000 ft
Answer:	It's cheap plastic.....