13 best natural gases

• Detect Various Flammable Gases: Portable Natural gas sniffer and tester is used to locate exact gas leak for various combustible gas, such as methane, natural gas, propane, LPG, sewer gas, coal gas, gasoline, other flammable gases
• Detection Range: Approximately 50 to 10,000 ppm (Based on Methane), instant response once encounter leakage points
• Easy-to-Use Gas Leak Detector: Powered by 3 AAA batteries (Not included), 12 inch bendable gooseneck can locate and detect the gas leaks even in hard-to-reach areas at home & VR, kitchen and fireplace etc., refer to “How and Where to Use the Y201 Combustible Gas Detector” video
• Sound and Visual Gas Alarm: Six red LED’s (visual) and 85dB audible alerts once encounter gas leakage along pipeline or around the suspected leakage points
• Original Design and Lifetime Technical Support: Design patent and certifications are applied to make sure the product quality and uniqueness. Replacement and friendly customer service are available even it’s broken in 24 months.

User questions & answers

Question:	is it precise
Answer:	Yes ours came with the headgear
Question:	Is any detection of gas harmful? My apartment supposedly just fixed its gas leak, but this is still showing the first level red light within my apt
Answer:	Don't know the max size. I wear a 7 3/4 hat and this fit fine. There is a minimal amount of adjustment left.
Question:	Do I need to replace the sensor after 2 years to keep this working? Or, is the unit useless after about 2 years? I read the sensor tip has a lifespan
Answer:	These type of hard hats is varies but it is fiberglass though. The color can be light to mid dark brown. They ship me with a light brown one. I was surprised it was very light, it was thin. Just be careful when buying from Warehouses. They say they will give you a new ratchet suspension but they never did. So be aware of that and if it happen they won't ship you a new one, they will ask you to reship it back and buy a new one, hopping you will receive the hard hat with the suspension but NO GUARENTEE. But to answer your question, yes it does look like that, but remember it varies on the seller because it come from a warehouse.
Question:	I don’t understand after it warms up how to detect gas ? Do I move the button until it stops ticking and no alarm? I move + and alarms sounds
Answer:	Front brim, ball cap style.

Product features

Techamor Portable Gas Leak Detector/Sniffer - Y201

The Y201 portable sniffer is an easy-to-use device that provides sound and visual alarm in presence of methane, propane, such as LPG, fuel and natural gas.

It’s mainly used to find and locate exact gas leak point along gas pipeline, around fittings or connectors at home & VR, and other similar applications. Helps to save hundreds of diagnostic fees from technician or plumber, and makes it's possible to debug gas leakage anytime by DIY.

For 24h gas monitor and detection, refer to Y301 and Y302.

2.1 Warm up process: around 10s

The speaker will always have “di didi…” until we turn off device, except one moment in step 2.2. At warm up period, ticking noise frequency is slow: around 2~3 times/s.

The knob is used to adjust sensitivity of detector after finish 10s warm up process, during the process, no matter how to adjust the knob, the device won't have any reactions.

2.2 Rotate the knob to adjust sensitivity

If the alarm sounds prematurely and LED lights are on after warm up, need to decrease sensitivity to prevent false alarm (dial downward "-", shown as red arrow) .

Rotate the knob to adjust sensitivity until the first bottom LED turn off or at the threshold of lighting up, and the moment that ticking sound stops. This is the best status.

But if it's inconvenient to get the best status, we can just make the first bottom LED be on and have slow ticking "di di...." sound. Because once encounter leakage, all the rest 4~5 LED will be triggered on together at just one moment.

2.3 Ready to sniff or trace leakage

Move the probe along pipeline or around the suspected leakage points, such as fittings, connectors and switches, once encounter gas leakage, all 5~6 LED lights will be triggered immediately and the low frequency (2~3 times/s) ticking will change into piercing sounds (frequency 6~7 times/s, too fast and human ears cannot distinguish one time by one time) .

3. Different Usage Pictures Collection from Lovely Customers

4.1 Could tell more related to use?

1) Easy to understand video will be good choice, refer to “How and where to use the Y201 gas leak detector” around pictures area at beginning . 2) Get service support, engineers on staff from factory online will help to answer any questions related to leakage if above video can't help to understand.

4.2 Why always has ticking sound?

The design of ticking sound has two purposes: 1) Indicates the device is working.For some cases, we need to extend the probe to the area that we can't see LED lights, customers could judge thru the sound changes. The green power LED light is also used to indicate the device is working. 2) Represent different levels of gas leakage. Low frequency (around 2~3 times/s) means warm-up period or no leakage, if changed into high frequency (around 6~7 times/s) during detection process, means encounter leakage issue.

Notes: above is based on we set sensitivity well, because if we rotate the knob at anti-clockside too much, even there don’t have any leakage, all the 6 LED will be triggered on and sound will become piecing high frequency.

4.3 Some batteries only use 10~15 minutes, then low battery indicator is on.

According to our experiment data at lab for different batteries brand, usually last from 15 minutes to 4 hours. Different brand batteries have very different quality. Indeed, the device is hungry for batteries. The sensor in the probe needs large power for micro burning process and we can feel a little warm if we use finger to hold the probe. Another reason maybe product itself, components (resistor, capacitor......) tolerance or damage on the PCB board may also lead to large power consumption, but the rate is very low.

Usually when we find customers from home inspection company, we will suggest purchasing rechargeable Li-batteries, because their technicians or plumbers use the device frequently and Li-batteries will help to save some batteries cost.

4.4 Is it normal or safe if get 1 red bar when move to high moisture room, around connectors or simply blow on probe?

Don't worry, it's normal, the large moisture change and CO affect the sensor performance, and may lead to false alarm by 1~2 LED red bars, but only last for 1~3s (very short time) if we move probe away. If we encounter leakage along the pipeline or connectors, all 5~6 LED bars will be triggered on at one moment, light and piercing sound alarm will last at least for 6~8s.

4.5 what's best distance between probe and pipeline/ranges/connectors.... during check process?

Recommend 1~10cm, if too far, concentration will become smaller as distance increase from leak point, and maybe not enough find and locate tiny leakage.

4.6 How about bubble method to check leakage compared with Y201?

Bubble is very good way and can be used to check all kinds of gas leakage while Y201 is mainly used for combustible gas. But for very tiny leakage and very strong leakage, bubble method maybe not good enough: 1) too tiny leak can't blow up bubble, too strong will blow the liquid away and can't have bubble, 2) some areas we can't extend to apply bubble liquid, 3) need good luck and skills to control the bubble liquid concentration if DIY bubble liquid, 4) in some case, liquid contact may lead to equipment or device damage.

The best way is: use both methods for double confirm if allowed, since bubble is more visible.

Product description

The 22,000 BTU Natural Gas Overhead Infrared Garage Heater with High Intensity Infrared Burner Technology is the most efficient way to heat a small space like a garage and workshop. You start feeling the warmth the instant you turn the heater on and remain warm while you work and the rest of your shop comes up to temperature. No more waiting for the whole space to heat up.

• 22,000 BTU's
• Heats up to 550-sq ft
• No electricity required
• Adjustable thermostat included
• Multi-position ceiling mount included

User questions & answers

Question:	Can this be converted to run on lp gas ? and if so what do i need to do so
Answer:	It has 5 settings.
Question:	Does this heater have electronic ignition
Answer:	As Dan mentioned your home should already be regulated at the gas meter which gets regulated before your home. One good way to check - if you have a natural gas stove or boiler check to see if they are piped directly from your home piping gas line or does it go through a regulator then into your appliance. Most homes in the US are set up this way. This is something that can be done rather easy you should be able to connect it yourself. However if your unsure or don’t feel comfortable than you should seek the help of someone that can.
Question:	I installed this unit and the small screen above the heating area getting very hot and is melting a bit in a few places. Is this supposed to happen
Answer:	I can't find one. They operate on normal home gas pressure which sources say is 1/4--60 psi. I have the Blue Grass Living (blue flame) 10,000 btu heater. It operates to perfection, and it burns so cleanly! If you ever lose electrical power, these heaters will keep right on heating!! A lot of words here; hope they help....
Question:	Can this heater be hooked up to a on/off switch
Answer:	It is thermostatically controlled. However you could not connect your Nest thermostat up to it. The thermostatic controls will be done via the Knob on top.

Product description

MAREY GA10LP Indoor Propane Gas Tankless Water Heater can provide up to 2. 7 Gal. per minute for a perfect shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. It is designed in the USA and it's perfect to supply endless hot water for up to 2 or 3 points of use simultaneously (for a variety of residential hot-water applications). Its compact design saves space and is easy to install: you will only need 2-D cell battery for the ignition and a venting (not included in the box). MAREY has been on the water heating business since 1955, bringing tradition and innovation together.

• Provide endless hot water on demand and only as needed
• Save up to 60% on electricity bills for water heating
• Compact design saves space and is easy to install almost anywhere
• No electrical connection is required so it's perfect alternative for those homes experiencing frequent power outages
• Unlimited hot water whenever is needed
• 5-year
• Allows water temperature to be controlled

User questions & answers

Question:	What size box does it ship in
Answer:	Hello. The 10L ships in a box that measures approximately 16 x 28 x 10 inches. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	For gas heater what is the outside dimensions, high , wigth , depth. Is it 23.6x13.6x6.9 with the extaust cap on top. Thanks, Ray
Answer:	Hi Ray. The dimensions you gave are for the body of the heater only, not including the exhaust cap, since it is removable, and not including the water and gas connections at the bottom.Kind Regards,RossGadgetsGo
Question:	Does it need to be vented
Answer:	yes i have one in an outdoor shower and the other inside a bathhouse and we put a 90 degree turn on it to go out the side of the wall and works just perfect.
Question:	Does this come with exhaust/vent pipes
Answer:	Greetings, The Marey Gas 10L Tankless heater does not come with the Exhaust/Vent pipes. You will need to locate B-vent or Z-Vent Pipe material size pipe 4" online.

Product features

Marey 10L Gas Tankless Water Heater

This compact model saves space and allows easy installation just about anywhere. It heats unlimited volume of water as needed and permits you to regulate the water flow and gas flow to better temperature. So if you instant and on demand want hot water, this is the product for you!

It is also a perfect alternative for those homes experiencing frequent power outages since this heater does not require electricity. The 10L unit provides up to 3.1 Gallons Per Minute, to provide hot water for your home family at multiple points of use!

Easy to install!

Multiple Points of Use!

Enjoy many features! Check temperature map below for more information on simultaneous points of use on your region.

Save Energy!

It can last a lifetime, keeping 87% efficiency level!

We are in the market since 1955!

GA10LP

Avaliable in Propane Gas.

GA10NG

...or also Avaliable in Natural Gas! Make sure you select your preferred gas type before you purchase your model.

Product description

Griddle as much as you want with Blackstone propane to natural gas conversion kit For families that grill for a crowd, enthusiasts who grill frequently and the entertainers who love hosting BBQ get-to-gathers in their backyard, using Blackstone gas conversion kit is the best way to ensure the fuel doesn't run out mid-cook. Easy to install, durable and safe, our gas conversion kit makes the transition a breeze. Grill more, grill often: • Once natural gas is installed, you won't have to worry about frequently changing propane tanks • You can connect the grill with your home's gas line and forget carrying cumbersome tanks • Grilling will become a lot more cheaper because natural gas is a more plentiful, affordable fuel • Natural gas burns slightly cleaner and requires no refining Features: • 15-minute installation: We provide a step-by-step instruction manual and all the hardware needed to install this kit • Premium quality: Thick and durable hose with rust-resistant brass fittings • Extra-long 10 feet hose • Wide compatibility with Blackstone Grill and Griddles How to install Blackstone BBQ natural gas conversion kit: • Control knobs in off position and close the propane tank and remove the valve • Remove griddle top, burner grate, shroud and burner tubes • Using a screwdriver and adjustable wrench, remove the side burners. You will find a small nut underneath. Set the burners aside and don't disconnect • Use the included orifice tool to remove brass orifices from the valve • Check thread pitch of removed orifices with included thread gauge • Apply a thread sealant. Be careful and do not get any sealant inside the orifice • Install new orifices with the same thread pitch as the removed orifices • Orifices for main tubes are marked 2.0 and for side, burners are marked 1.39 • Reinstall burner tubes, side burners, and the small nut underneath • Remove the propane hose and connect the natural gas hose • Happy griddling!

• ENJOY UNENDED SUPPLY OF NATURAL GAS with Blackstone gas conversion kit. Our BBQ conversion kit makes sure you never have to worry about running out of gas during your next outdoor cooking venture. Very useful while grilling a big meal or for a crowd.
• PREMIUM QUALITY: The 10 feet hose of our gas grill conversion kit is durable enough to take up the beating and flexible enough to move your gas device as needed. The solid brass fittings can survive the elements without rusting or premature damage.
• COMPATIBILITY: Blackstone conversion kit is compatible with Blackstone 28" Griddles, 36" Griddles, Tailgater, Rangetop Combo, and Single Burner Rec Stove. Please note that it doesn't work with the Blackstone AirFryer Griddle Combo.
• EVERYTHING INCLUDED KIT: The grill and griddle conversion kit from propane to natural gas includes a 10 feet (3/8") natural gas hose, 3/8" quick connect fitting, 16 natural gas orifices, 2 thread check gauges and a 7mm orifice wrench.
• HASSLE-FREE INSTALLATION: You don't need to be mechanically inclined to install this BBQ natural gas conversion kit. All you need to do is to follow the detailed instructions and that's it. Plus, you won't be needing any fancy tools

User questions & answers

Question:	Can you use this coversion kit for the 36” airfryer and griddle combo??? if not which one do i need to order
Answer:	FULL INGREDIENTS: ACTIVE INGREDIENTS: Colloidal Oatmeal -- 0.5% INACTIVE INGREDIENTS: Water/Aqua/Eau, Stearic Acid, Glycerin, C12-15 Alkyl Benzoate, Caprylic/Capric Triglyceride, Glyceryl Stearate Se, Glyceryl Stearate, Cetearyl Alcohol, Butyrospermum Parkii Butter, Dimethicone, Squalane, Allantoin, Camellia Sinensis Leaf Extract, Caprylyl Glycol, Ceramide 3, Chrysanthemum Parthenium Extract, Disodium Edta, Eucalyptus Globulus Leaf Oil, Glycyrrhiza Glabra Root Extract, Sodium Hydroxide, Xanthan Gum, Phenoxyethanol.
Question:	Can this kit be used to connect the Blackstone 1666 to RV propane system
Answer:	Because individual people buy it from Ulta for $19 on black friday sales then sell it on here for ridiculous prices. Nust like scalpers on Ebay with PS5. I just bought a 10pz jar at Ulta for $19, free shipping and earned points towards cash off my next purchase.
Question:	Will this work for a camp chef
Answer:	Aqua (Deionized Water), Santalum Austrocaledonicum Wood Water (Sandalwood Hdyrosol), Aloe Barbadensis Leaf Juice (Organic Aloe), Glycerin (Kosher, Vegetable), Cassia Angustifolia Seed Extract (botanical hyaluronic acid), Globularia Cordifolia Callus Culture Extract (plant stem cells), Niacinamide (Vitamin B3), Ricinus Communis Seed Oil (Organic Castor Oil), Rosa Canina Fruit Oil (Organic Rosehip Seed Oil), Helianthus Annuus Seed Oil (Organic Sunflower Oil), Dimethyl Sulfone (MSM), Ethylhexyl Palmitate, Glyceryl Stearate, Panthenol (Vitamin B5), Cocos Nucifera Oil (Organic Coconut Oil), Beeswax, Theobroma Cacao Seed Butter (Organic Cocoa Butter), Simmondsia Chinensis Seed Oil (Organic Jojoba Oil), Palmitoyl Tripeptide-5, Palmitoyl Tetrapeptide-7 (matrixyl 3000), Palmitoyl Tripeptide-1, Silk Protein Amino Acid blend of: Sodium Pca, Sodium Lactate, Arginine, Aspartic Acid, Sodium Carbomer, Glycine, Alanine, Serine, Valine, Isoleucine, Proline, Threonine, Histidine, Phenylalanine, Chondrus Crispus Extract (Irish Moss), Macrocystis Pyrifera (Kelp) Extract, Urtica Dioica Extract (Nettle), Pelargonium Graveolens Leaf Oil (Rose Geranium Essential Oil), Cymbopogon Schoenanthus Oil (Lemongrass Essential Oil), Monarda Fistulosa (Bee Balm), Rosa Damascena Flower Extract (Rose), Rosa Damascena Flower Wax (Rose), Amyris Balsamifera Bark Oil, Copaifera Species Resin Oils, Dipterocarpus Turbinatus Balsam Oil, Santalum Album Oil (Sandalwood), Santalum Spicata Wood Oil (Sandalwood), Cetyl Alcohol, Potassium Stearate, Hydroxyethyl Ethylcellulose, Polysorbate 20,Potassium Sorbate, Sodium Benzoate, Carbomer, Phenoxyethanol, Carrageenan, Butylene Glycol, Ethylhexylglycerin.
Question:	i have blackstone adventure can i convert to propane to natural gas straight from d house to my grill
Answer:	Aqua (Deionized Water), Santalum Austrocaledonicum Wood Water (Sandalwood Hdyrosol), Aloe Barbadensis Leaf Juice (Organic Aloe), Glycerin (Kosher, Vegetable), Cassia Angustifolia Seed Extract (botanical hyaluronic acid), Globularia Cordifolia Callus Culture Extract (plant stem cells), Niacinamide (Vitamin B3), Ricinus Communis Seed Oil (Organic Castor Oil), Rosa Canina Fruit Oil (Organic Rosehip Seed Oil), Helianthus Annuus Seed Oil (Organic Sunflower Oil), Dimethyl Sulfone (MSM), Ethylhexyl Palmitate, Glyceryl Stearate, Panthenol (Vitamin B5), Cocos Nucifera Oil (Organic Coconut Oil), Beeswax, Theobroma Cacao Seed Butter (Organic Cocoa Butter), Simmondsia Chinensis Seed Oil (Organic Jojoba Oil), Palmitoyl Tripeptide-5, Palmitoyl Tetrapeptide-7 (matrixyl 3000), Palmitoyl Tripeptide-1, Silk Protein Amino Acid blend of: Sodium Pca, Sodium Lactate, Arginine, Aspartic Acid, Sodium Carbomer, Glycine, Alanine, Serine, Valine, Isoleucine, Proline, Threonine, Histidine, Phenylalanine, Chondrus Crispus Extract (Irish Moss), Macrocystis Pyrifera (Kelp) Extract, Urtica Dioica Extract (Nettle), Pelargonium Graveolens Leaf Oil (Rose Geranium Essential Oil), Cymbopogon Schoenanthus Oil (Lemongrass Essential Oil), Monarda Fistulosa (Bee Balm), Rosa Damascena Flower Extract (Rose), Rosa Damascena Flower Wax (Rose), Amyris Balsamifera Bark Oil, Copaifera Species Resin Oils, Dipterocarpus Turbinatus Balsam Oil, Santalum Album Oil (Sandalwood), Santalum Spicata Wood Oil (Sandalwood), Cetyl Alcohol, Potassium Stearate, Hydroxyethyl Ethylcellulose, Polysorbate 20,Potassium Sorbate, Sodium Benzoate, Carbomer, Phenoxyethanol, Carrageenan, Butylene Glycol, Ethylhexylglycerin.

Product description

This Blue Flame 30,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**

• 30,000 BTU Natural Gas heater to heat spaces up to 1000 square feet
• Blue flame burner for even convection heat. Maximum Elevation (Ft)-4500. Fuel Consumption/Burn Rate (Gal/Hr)- .030 MCF
• Automatic low oxygen shut-off system (ODS). CSA Certified
• Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.included.Theromostat, legs and wall mounting hardware
• Fuel Type:Natural Gas.Not for use in bathrooms, bedrooms, or recreational vehicles

User questions & answers

Question:	if it has a thermostat, what temperature is it shutting off? I have a different fire place with a 73 degree shut off manufacturing setting,not enought
Answer:	I asked the manufacturer for the thermostate info. It has a knob on top from 1-5. 1-60.8°f 2-75.2°f 3-89.6°f 4-104°f 5-118.4°f He also said that they could vary slightly from heater to heater.
Question:	I don't see a pic or anything that shows where/how the fan mounts. Does anyone know
Answer:	The fan will mount on the back of the heater. There is a punch out that will be removed and the fan will go in it's place.
Question:	Would this heater work in a 2 car garage
Answer:	In short yes. we have this on the first floor of our house. it is not yet winter, but this is a 30,000 BTU heater; it heats the entire house fast - like 20 mins upstairs and down. I would say the same for a two car garage. I plan on moving this unit to the basement shop which is exposed to ground level in the back and unheated; basically a 1 car garage back there and I expect this to out perform. I will add one thing: this is the blue flame unit. I have had shop heaters before and prefer the radiant heaters (of which Mr Heater makes one just like this) - they have the clay looking elements in them that glow red/orange; those heaters will heat things in the space and then those items give off the heat. I used to aim one at my roll away tool box. in an area where you might have a lot of space up above, such as a loft the radiant version of this heater may be better as it will heat the items it is near with less heated air floating up. either way, this is a safe bet.
Question:	Does the mhvfb30ngt unit have an automatic igniter to maintain temperature or do you to to push an igniter switch to start it each time
Answer:	It has a pilot lit that will stay lit at all times, unless you turn the dial to the Off position. The heater will start up when the thermostat dial settings determines that it's time to turn the heater on.
Question:	I stripped the threads on the heater, how can i fix this
Answer:	You can tap it out if you have a tap and die set, otherwise you will have to order new parts
Question:	Want 30000 Btu radiant heater with blower
Answer:	The 30000 BTU heater will be the model number MHVFRD30LPT. Click on link provided to view the heater. https://www.amazon.com/Mr-Heater-Corporation-Radiant-MHVFRD30LPT/dp/B01DPZ56KU/ref=sr_1_1?ie=UTF8&qid=1514918538&sr=8-1&keywords=MHVFRD30LPT
Question:	Will this work with a 20 pound tank
Answer:	Yes, but you will need to add a regulator between the heater and the 20 pound tank for safety
Question:	So, it has no thermostat but output is variable? How does this work
Answer:	It does NOT have a thermostat, settings are either high or low. It will NOT turn on and off on it's own when reaching certain temperatures, it even says its NOT thermostat controlled in the manual.

Product features

Radiant Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and Infrared (or radiant heat). The difference in these types of heat are how the warm.

The Infrared heater warms objects. It doesn’t warm the air like a Blue Flame. It can be put in an area with objects which the heater will heat and then the object will heat the air. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Blue Flame Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and infrared (or radiant heat). The difference in these types of heat are how the warm.

The Blue Flame heater warms the air. It doesn’t radiate the heat like an infrared unit. It can be put in a narrow area because the heat rises and warms the area from the ceiling down. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Product description

The ET120 is it the perfect choice for HVAC professionals. It is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and other combustible gases at concentrations as low as 50 ppm. It features two levels of sensitivity depending on users' needs: High (approximately 50 to 1000 ppm) and Low (approximately 1,000 to 10,000 ppm). Gas Leak Detector with 18-Inch flexible gooseneck. Combustible gas detection range: 50 to 10000 ppm. Combustible gas detection range: 50 to 10000 ppm. Over-molded body for comfortable grip. Auto power-off after 10 minutes of non-usage conserves battery life. Includes detector, 4xAAA batteries, instruction manual and storage pouch. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Detection range: Approximately 50 to 10,000 ppm* (*based on Methane)
• Two levels of sensitivity: High (approximately 50 to 1000 ppm) and Low (approximately 1000 to 10,000 ppm)
• Five red LED's (visual) and 85dB audible alerts that increase with gas concentration
• Automatic zero-point calibration at power-up (lights will flash during self-calibration; this does not indicate the presence of gas)
• 18-Inch flexible gooseneck expands sensor's reach; clips onto meter for storage

User questions & answers

Question:	Will this detect a co2 leak
Answer:	this gas detector very easy to use and it works precisely
Question:	Can this detect r22 and 410a
Answer:	After warm-up and the yellow light goes out adjust the side dial to adjust the sensitivity until the first, bottom LED is at the threshold of lighting up and the ticking just starts to sound. If the alarm sounds after warm up the knob is rotated too far + rotate - until the first LED is lit or about to be lit. If the first level red light is lit and the alarm is not sounding, it's not detecting any gas.
Question:	Will this detect hydrogen
Answer:	HI,Usually the products can work for at least 2 to 3 years , if sensor is not sensetive enough , we recommend you to replace the sensor at that time . You can send Email to contact us, feedback your address and we will arrange our after service team to ship sensors to you for replacement. We can use DHL to ship , or ask our US local team to ship from your side . Anyway, if you have any concerns or question , just contact us and we will reply in 24 hours and feedback corresponding solutions . Thank you choose our products and service .
Question:	Does this detect hydrogen sulfide
Answer:	Turn it on let it warm up a just dial till lights go out and ticking starts the ticking means the sensor is sampling the air if it detects methane it will alarm the more lights the higher the gas concentration

Product features

Combustible Gas Leak Detector

The ET120 is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and other combustible gases at concentrations as low as 50 ppm, making it the perfect choice for HVAC professionals.

Product description

Rinnai V94IN Tankless Water Heaters, V94iN-Natural Gas/9.4 GPM

• Energy Factor of .82 / Uniform Energy Factor of .81
• Maximum output, minimum space. Suitable for installation in non-traditional spaces such as crawl spaces and attics
• Save time with hot water whenever and wherever you need it, any size home, even for simultaneous uses at multiple fixtures
• Maximum output, minimum space. Suitable for installation in non-traditional spaces such as crawl spaces and attics

User questions & answers

Question:	which models are "condensing" units, please
Answer:	I don’t know. But I suggest u look for a different brand. It already failed twice in less than a year and their warranty is a scam. They provide the parts which are pennies and leave out labor.
Question:	How does it effect the water pressure, will it change
Answer:	It does not effect my water pressure at all. I’ve had it for over a year now
Question:	My existing water heater is located next to and shares a flue with the furnace. Can I hook the same way on this
Answer:	Hold up there, previous answer, not so fast. It is true that you should not have both the hot water heater and furnace venting directly into the flue, combining the exhaust. However, some people see their vent pipes entering the flue (or chimney wall) and assume they are both releasing the fumes inside the chimney. In some cases, the venting pipes continue separately up the flue. Joseph, if you have two vent pipes entering your flue, there is a chance that both pipes continue separately up the flue and out the top. If that is the case, you may be able to use the existing hot water vent system. When you look at the top of your chimney, do you see two terminations coming out?
Question:	How does very cold intake water affect performance
Answer:	Sorry to contradict but the temperature of the water going into the water heater will definitely have an effect on the temperature of the water coming out. the water heater needs to provide enough BTUs to heat the volume of water that you need to the water temperature that you want. If the water starts off at a lower temperature it will take more BTUs to get it to the temperature you want. This unit claims to be able to provide 6.6 gallons of hot water per minute but that assumes the water is startling an average temperature. If you have a modern shower head it will only use about 2.5 GPM but if you have second shower going, a hot water faucet open or a clothes washer filling at the same time you will run out of capacity quickly. Rinnai should have tables on their website that shows the ability of the unit to heat water at a variety of starting temperatures to a range of hot water temperatures at a given flow rate.

Product features

Endless Hot Water

Put an end to scheduling your hot water need.

• Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.

Hot Water On-Demand

Don't waste while you wait.

• Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
• While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.

Save Valuable Space

Your hot water heater doesn't have to be a behemoth!

• Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
• Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.

Affordable, Efficient Savings

Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.

• Use 40% less energy than traditional tanks* because you heat water only when you need it.

100 years of Confidence

Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.

• Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
• Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.

Sustainable Reliability

It's a smart investment for now and the future when you intertwine sustainability and reliability.

• Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
• Average life expectancy is 20 years vs. 8-10 for a traditional tank**
• With this premium product, you'll save–both money and worry–in the long run.

Product description

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protect you and your family from two deadly threats. The KN-COEG-3 includes 9V battery backup that provides protection during a power outage, when AC-only units cannot provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. Temperature range- 40 degree Fahrenheit to 100 degree Fahrenheit.

Protect your family from the dangers of carbon monoxide (CO), methane, and propane exposure with the Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO and explosive gas. The digital display shows if gas is present indicates CO levels in parts per million, allowing you to see if, how, and when levels change.

Advanced Technology in an Easy-to-Install, Plug-In Design

Designed for home use, the Kidde KN-COEG-3 Nighthawk is a UL-listed, A/C-powered, plug-in alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO, methane, and propane exposure. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring--even during power outages.

The Dangers of Carbon Monoxide, Methane, and Propane Exposure

The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it's odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.

Likewise, methane and propane gases are commonly used in homes for cooking, heating, and water heating. Although it happens rarely, gas leaks can sometimes occur inside the home, increasing the risk of fire or explosion.

Audible Alarm Pattern Alerts you to Elevated CO and Gas Levels

When placed on every level of your home, alarms like the KN-COEG-3 Nighthawk can help protect everyone in the house by giving you an unmistakable signal when gas levels have reached an unhealthy point. If unhealthy levels of CO are detected, the alarm will emit four quick audible beeps every five seconds until either levels decrease or the reset button is pressed. If methane gas or propane gas is detected, the alarm will emit beeps every other second with "GAS" shown in the display.

Easy-to-Read Digital Display Shows CO Levels

The KN-COEG-3 Nighthawk is preferred among traditional CO and explosive gas alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored-- from 30 to 999 ppm--and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous display also shows if gas is present.

LED Shows Sensor Status

With the KN-COEG-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it's working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.

Convenient Mounting Options

The KN-COEG-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it's plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.

The UL-listed Kidde KN-COEG-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.

About Kidde: A UTC Fire and Security Brand

Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.

What's in the Box

Kidde KN-COEG-3 Nighthawk Carbon Monoxide and Explosive Gas Alarm, 9-volt battery, mounting hardware, and installation guide.

From the Manufacturer

The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This unit is an AC powered, plug-in CO and explosive gas alarm that protects you and your family from two deadly threats. The 900-0113 includes 9V battery back up that provides protection during a power outage, when AC only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide, if any. The unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas , methane or propane. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades.

• Protects you and your family from two deadly threats: Carbon monoxide and explosive gas.
• Sounder alarm – The KN-COEG-3 offers a loud 85-decibel pulsing alarm that will sound to alert you to a potential problem.
• Digital display - Displays the level of carbon monoxide the unit is sensing.
• Peak level memory - Recalls the highest CO concentration detected
• Test/reset button - Tests unit’s electronic circuitry operation and allows you to immediately silence the alarm
• Two alarms in one detects carbon monoxide and explosive gas
• Three convenient mounting options

User questions & answers

Question:	What is the sound level I need one for basement and need to hear on ground floor
Answer:	Dear cutomer, excuse that this prodcut Y301 can't detect hydrogen gas, it's mainly sensitive for methane and propane. thank you very much
Question:	is this an explosive gas and carbon monoxide detector? it only says "carbon monoxide detector" on the actual product
Answer:	Don't worry, it's normal, the large moisture change can affect the sensor performance, and may lead to false alarm, but the data on display only switch to 1,2 or 3, but won;t trigger the voice and light alarm. If the data become 5 or more than 5, voice and light alarm will be triggered. Thank you very much and best regards.
Question:	No manual included. Do I just plug it in and test it? What does it display if gas is detected? Thanks fellow Amazoners
Answer:	HI Niran, it's sensitive to methane and propane. We think it can't used to monitor and detect CO. thank you vey much
Question:	I smell natural gas in my house, and am wondering if that is the same as explosive gas? Will it detect natural gas
Answer:	Dear Karen, temporarily the Y301 doesn't get UL certification, it passed CE, FCC, EMC and RoHs. We are applying US ETL certification which is equivalent to UL certification. Thank you very much and best regards.

Product features

Plug-In Explosive Gas and Carbon Monoxide Detector with Battery Backup

The Kidde KN-COEG-3 AC powered, plug-in CO and explosive gas alarm protects you and your family from 2 deadly threats. The KN-COEG-3 includes 9-Volt battery back up that provides protection during a power outage, when AC-only units can not provide protection. By pressing the Peak Level Button you can see the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane.

Carbon monoxide and gas detector plugs directly into wall outlet

Digital display updates CO level in PPM every 15 seconds

Loud 85 dBA pulsing alarm that will sound to alert you to a potential problem

Product description

Grisun Stainless Steel Drop-in Fire Pit Ring Burner Pan Kit simple and advanced design makes your DIY indoor or outdoor fire pit more modern and advanced. This product, which Use propane or gas will save you from the exhaust gas and smoke problems caused by ordinary wood burning fire pits. It is not only an external experience-a stable and beautiful flame when burning, but also a warm atmosphere to get closer to family and friends. High-quality material save you from the trouble of replacing accessories, and high-quality stainless steel is worth your confidence to buy.

Specification:

Heat Output: Max.90,000 BTU

Material: Stainless steel drop-in pan.

Applicable: Propane or Natural Gas

Dimensions:

Fire Pit Pan: 30"" x 10""

H Shape Burner： 25"" long

The Face Plate: 5.9*5.9 inches

Base Plate: 5.9*3.9 inches

Valve key: 3 inches

Regulator hose: 159cm / 62.6 inches

Gas line: 135cm / 53 inches

• 【Dimension＆Material】 - 30" x 10" Rectangular Drop-in Fire Pit Burner Pan, H-shaped fire pit burner, we include two 3/8" male flared x 1/2 NPT fittings for your convenience. MADE OF High Quality Stainless Steel for long-lasting use. 【Package】 - Including a burner pan, Ignition kit with shut-off valve, non-whistle gas line, air mixer, regulator hose. Careful well packaging, there are protective cotton protect equipment to prevent it bend during the transportation.
• 【Multiple Choice】 - Natural gas or propane can be used for this Drop-in Fire Pit Burner Pan. Air mixer and portable propane regulator for propane using. Use this drop-in fire pit pan kit to replace the wooden firepit table, avoid the trouble of exhaust and dust. DIY a beautiful and warm firepit for Indoors or Outdoors.
• 【Durable＆Rustproof】 - Made of superior quality stainless steel ensure its long-lasting use. Withstand high temperature and not easy to bend. Resist corrosion. The high-quality material itself makes it not easy to rust.
• 【Easy to install】 - Complete accessories and easy to install into your DIY fire pit. Drop-in design and Elegant round burner design add freshness and modernity to your fire pit. Use with decorative fireglass to make your fire pit more advanced and brilliant firelight effect. We recommend 30 pounds of fireglass for this kit.
• 【Thoughtful Design】 - Not whistling noise, All of our flame holes are precession drilled not punched so the gas can flow smoother and create better flame. The holes at the bottom will drain water and prevent water from accumulation.

User questions & answers

Question:	The item description mentions this can be use for natural gas or propane. what is needed for this to work with natural gas
Answer:	Yes. That is not good.
Question:	My propane fire table’s opening is 41 5/8 in. by 9 inches. Do you have an insert that will fit
Answer:	I really don t know but I do know it’s great for dry skin. I use it daily on my face and arms! It very mild so I would think it would help.

Product features

Grisun 30 x 10 Inch Rectangular Stainless Steel Drop-in Fire Pit Pan With Gas Control And Ignition Kit

Grisun Stainless Steel Drop-in Fire Pit Ring Burner Pan Kit simple and advanced design makes your DIY outdoor fire pit more modern and advanced. This product, which Use propane or gas will save you from the exhaust gas and smoke problem caused by ordinary wood burning fire pits. It is not only an external experience-a stable and beautiful flame when burning, but also a warm atmosphere to get closer to family and friends. High-quality material saves you from replacing accessories again and again.

Durable Pan

• High-quality steel can ensure its long-lasting durability, while being more resistant to high-temperature flames without deformation.
• The thoughtful design leaves a space for you to install the ignition needle, and the leak hole is convenient for the liquid to leak after entering the liquid

Mix Air

• As we all know, when propane burns, it needs a little air to show better combustion effect.
• There is our carefully designed mixed air hole at the gas pipe connecting the burner, Make your flame more pure, smoke-free.

Fine accessories

• Package contains gas line hose, regulator hose, valve key, gas control and ignition kit, thread seal tape.
• Gas opening and flame size can be easily and conveniently controlled by the gas control and ignition kit through the valve key. It’s also very easy to ignite the burner, just click the button.

Use with Grisun fire glass, your fire pit pan is not only the most modern but also the most shining and warm.

This fire pit, when you pair it with our fire glass, can store more heat for you, refract a wider range and warm light, without polluting gas, no burning waste, safe and convenient. It is recommended that use it with 30 pounds of fire glass.

• Calculator for Square or Rectangle Fire Pit
• Width X Length X Depth, divided by 19 = pounds of fire glass needed. We recommend a minimum 2” of fire glass depth for most installations. For example, a 48"" X 14"" fire pit at the recommended 2” of fire glass depth: 48 X 14 X 2, divided by 19 = 70 lbs.

• 【 Quick Connection】Converts your NG/Propane appliances to natural gas by this hose 1/2" id w/ 3/8" Female x 1/2" Male flare adapter, quick-connect attached to the 1/2" black iron pipe directly.
• 【Sufficient Airflow】This 1/2" ID natural gas hose could privide adequate gas flow up to 100,000BTU/hour of heat to meet your more needs for other grills of 30" or larger sizes.
• 【Wide Appication】Kohree 1/2 ID natural gas hose conversion kit fits for Weber gas grill, griddle, smoker, fire pit, pizza oven, portable generator, outdoor heater and more NG/propane appliance .
• 【Durable & Flexible】 This 12ft CSA certified propane hose made of high quality rubber & 100% solid brass with good weather resistance, anti-aging, flexible enough to move gas device as your needs.
• 【What You Will Get】A 12' natural gas hose with 1/2" inner diameter Female Outlet & a 3/8" Female flare by 1/2" Male flare adapter, Male quick connect nipple Inlet & Female quick connect coupling with dust plug and cap.

User questions & answers

Question:	What is the hose diameter
Answer:	Dear Jade,This hose is of 1/2" ID.
Question:	Will this conversion kit work with a dyna-glo propane grill model# dgc310cnp-d
Answer:	This 1/2" ID natural gas hose could provide adequate gas flow up to 100,000BTU/hour of heat to meet your more needs for other grills of 30" or larger sizes. Converts your NG/Propane appliances to natural gas by this hose 1/2" id w/ 3/8" Female x 1/2" Male flare adapter, quick-connect attached to the 1/2" black iron pipe directly.
Question:	Can this hose for propane or just natural gas
Answer:	Dear Mitmitchell,This hose fits for both propane and natural gas.
Question:	Will this work for a weber spirit
Answer:	Yes, this can work for a weber spirit 210.
Question:	Can the 2 heating heads be rotated and if so, independently of each other
Answer:	They can be rotated independently
Question:	do you need electric to ignite
Answer:	You do need thumbs, but no electricity.
Question:	The burners light but switch off after i release the safety shut off valve plunger, no matter how long i keep it pushed in. it should stay lit
Answer:	Not sure if you have your problem fixed yet. But I had the same problem awhile back. I pushed the sensor probe closer to the heat element. I was too far away to stay heated and keep the unit on.
Question:	How long does a normal supermarket propane tank last with this unit
Answer:	That depends first I have no idea what a "Supermarket propane Tank" is, if it is a standard 20lb propane tank which you see on every gas grill and on this illustration then I can answer that question. 1 gallon of propane weighs 4.2 pounds, a 20 pound tank weighs 17 lbs empty and 37 lbs with 20 lbs of propane in it, a "full" 20 lb cylinder should have 4.7 gallons or propane in it.Now we have to discuss this model of Mr. heater which has two burners, you can run it on one or both and you can set it for low medium or high which is many differentt total burn times, I will assume either one or both with no mixture of settings.Single burner approx. operating hr.: 52/Low 37/Med 30/HighBTU output: 8,000 12,000 14,000Double burner approx. operating hr.: 25/Low 18/Med 15/HighBTU output: 16,000 24,000 28,000
Question:	how long does it last on a small propane tank
Answer:	The 1# tank will ice up and slowly turn off the heater on anything but the lowest setting. That lasts about 2 hours. A little buddy heater with 4K/9K Btu works best with the 1# cylinders. I have the hose hookup for a 20# tank and it's nice to have the option of using either size. You have to light this one with a lighter which is just another thing to forget to pack.
Question:	Just tried to make coffee on it and the grill started to collapse is there a sturdier grill for it
Answer:	As far as I know... No. A simular thing happened to me. I reattached the grill using good old fashioned wire hanger twisted. This was only a temporary fix.
Question:	Did anyone get the "foot" for the 1 lb. bottles and is it a worthwhile add-on
Answer:	Not sure what you're referring to. The one lb. bottle hangs suspended when connected. I wouldn't recommend getting this model. Get the model MH12C if you can. The regulator broke after a couple months and I couldn't return it. Instead I bought the regulator that was for the MH12C and adapted it to fit the MH15C. Since then it's been working great for a year. I also recommend purchasing the hose adapter so you can run off a 20 lb. bottle. It'll last a lot longer
Question:	how long does a 1lb bottle last compared to a 20lb bottle
Answer:	A one pound bottle on medium setting will last about 1-1/2 hour so figure at least 25 hrs for a 20 pounder.

Product features

Multi-application

Fit for weber/napoleon grill, fire pit, patio heater, pizza oven, portable generator. Included Charbroil, Blackstone, and more related brands.

Specification:

• Hose length: 12 Feet
• Outlet diameter: 3/4 "-16unf
• Inlet Diameter :1/2" NPT
• Max Working Pressure:1/2 PSIG
• Flow Capacity:100000 BTU/HR
• NOTICES: Need a low pressure regulator between propane grill and fuel supply.

Product description

Excellent quality:

1. This Upgraded 36-foot 1/2-inch inner diameter natural gas hose is made of high-quality rubber and durable solid brass fittings. It is anti-cracking, anti-rust and very durable.

2. The length is long enough to use the barbecue grill at a safe distance. Give you a free, flexible and safe experience.



Package details:

1*36 feet 1/2 inch inner diameter natural gas hose

1*1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings

1*3/8" Female Flare by 1/2" Male Flare Adapter

[Quality Service] If you have any questions or needs in the process of using our products, you can email me at any time and I will give you the best answer. You do not have to bear any losses.

• [Large capacity] This gas grill hose 1/2 inch inner diameter hose, with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, can support a larger gas grill heat supply. Fittings for fire pit, generator, patio heater, grill, etc
• [Flexible conversion] This natural gas conversion kit is additionally equipped with a 3/8" Female Flare by 1/2" Male Flare Adapter, which can be converted to a 3/8-inch connector gas grill, flexible conversion, more widely adapted to your need.
• [Durable anti-cracking] This Upgraded 36-foot 1/2-inch ID propane gas hose is made of high-quality rubber and durable solid brass fittings. It is anti-cracking, anti-rust and very durable.
• [Enough airflow] Our natural gas grill hose can provide up to 100,000BTU/hour of heat, and provide sufficient airflow for grills of 30 inches and larger sizes to meet your more needs.
• [Quality Service]Due to rules, the seller cannot respond to the buyer’s comments. In addition, if the name of your review is different from the name of your order, it will be difficult for me to find your order, and I will not be able to contact you and serve you. So if you have any questions, please feel free to send me an email, I will give you the best answer! I will be responsible for our products to the end.

User questions & answers

Question:	Would this gas line support a 3750 watt generator
Answer:	Hi! I really didn't read all ingrdients for this product formula, for me what's more important is if works, it works great and I notice a difference in my skin just with a few uses. No questions, it's a great product and I really recommend, because you get results.
Question:	Will this work from a 100 lbs tank to 45,000 btu heater
Answer:	If you buy it on amazon it's in an Amazon box, but if you buy from the company website it's delivered in a Brickell box.
Question:	I need to operate a 46,000 btu natural gas patio heater (fire sense). it has a 3/8" connector, but no information on hose diameter. this hose too big
Answer:	This is a moisturizer so you don't use moisturizer after, but you can use sunscreen after. The night anti aging cream is a thicker and does not contain vitamin c.
Question:	For a portable natural gas generator, i need a 24 foot 1/2" hose with quick connect adapter (female), and coupling with sae 1/2" flare (male). work
Answer:	I use this during the day and the anti aging cream at night.

Product features

Package details

• 1*36 feet 1/2 inch inner diameter natural gas hose , with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings
• 1*3/8" Female Flare by 1/2" Male Flare Adapter

Product description

The best choice :

1.We have upgraded the materials of hoses and accessories, The propane hose is made of high-quality rubber, And connected with 100% solid brass connector, Has very good weather resistance, And anti-aging, Anti-rupture, Anti-rust, Comply with CSA certification, More durable than normal propane hose, safer

2.Three sizes to choose from, there is always a length that suits you, The grill can be used at a safe distance. Give you a free, flexible and safe experience

3.Airtight tape we give away, Can guarantee good air tightness, Safer, rest assured

Package details :

1* (12FT / 24FT / 36FT）1/2" ID natural gas hose and fitting assembly

1* 1/2" to 3/8" quick connect adapter

1* 1/2" to 3/8" internal thread adapter

Widely used :

This natural gas conversion kit is additionally equipped with a 3/8" Female Flare by 1/2" Male Flare Adapter, which can be converted to a 3/8-inch connector gas grill, flexible conversion, more widely adapted to your need

Greater capacity :

1/2 inch ID Natural Gas Hose - with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, Supplies up to 135,000 BTU P/HR, provide adequate gas flow for grills and other gas appliance

Quality after-sales :

1 Year quality guarantee, If you have any questions or needs during the use of our natural gas conversion kit, you can email me at any time and I will give you the best answer. You do not have to bear any losses

• 【Good quality】Material upgrade - The propane hose is made of high-quality rubber, And connected with 100% solid brass connector, Has very good weather resistance, It is anti-cracking, anti-rust and very durable, Comply with CSA certification
• 【Works Perfectly 】1/2" ID natural gas hose with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings. Connects natural gas or LP gas supply to a larger BTU output outdoor appliance
• 【Widely used】This natural gas conversion kit is additionally equipped with a 3/8" Female Flare by 1/2" Male Flare Adapter, which can be converted to a 3/8-inch connector gas grill, flexible conversion, more widely adapted to your need
• 【Greater capacity】1/2 inch ID Natural Gas Hose - with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, Supplies up to 135,000 BTU P/HR, provide adequate gas flow for grills and other gas appliance
• 【Quality after-sales】1 Year quality guarantee, If you have any questions or needs during the use of our natural gas conversion kit, you can email me at any time and I will give you the best answer. You do not have to bear any losses

Product description

The DVAG11N heater from Ashley Hearth Products makes the perfect solution for zoned heating. The space saving direct vent furnace design mounts to an exterior wall and the adjustable vent assembly adjusts to fit walls from 4-1/2 inches to 10 inches thick. For clean, comfortable heat when and where you want it, the gas flame is completely sealed inside, away from all contact with room air. Air necessary for combustion is drawn into the chamber from outside through the vent and combustion products are vented directly to the outside. Only clean, gentle heat, in continuous circulation is delivered into the room. Windows and doors stay closed because no room air is used for combustion. The direct vent natural gas wall furnace is designed to heat up to 375 Sq. Ft.

• 11,000 BTU heat input heats up to 375 sq. ft.
• Designed for use with natural gas
• Sealed burn system is perfect for bedrooms and living spaces
• Matchless Piezo lighting for quick starts
• No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod)
• Approved for use in mobile or modular homes
• Power source type: natural_gas

User questions & answers

Question:	Is a blower that I can adapt it for better air circulation
Answer:	Prob not. But they do make the same heater in 25K BTU - LP
Question:	How’s the thermostat work. I see
Answer:	It’s a standing pilot and works great
Question:	Once mounted, how.many inches does this stick out from the wall
Answer:	Shouldn’t be melting - but will malform a bit. Under lots of heat gets kinda ‘wavy’
Question:	How high is vent from the bottom of the heater
Answer:	Hello Kevin, No it can not. If you need additional assistance, we're happy to help! Just reach out by phone at 877-447-4768 or email here: http://www.ghpgroupinc.com/CTUS.html -GHP Group Customer Support-