14 best gas infrared heaters

Product description

The 22,000 BTU Natural Gas Overhead Infrared Garage Heater with High Intensity Infrared Burner Technology is the most efficient way to heat a small space like a garage and workshop. You start feeling the warmth the instant you turn the heater on and remain warm while you work and the rest of your shop comes up to temperature. No more waiting for the whole space to heat up.

• 22,000 BTU's
• Heats up to 550-sq ft
• No electricity required
• Adjustable thermostat included
• Multi-position ceiling mount included

User questions & answers

Question:	Can this be converted to run on lp gas ? and if so what do i need to do so
Answer:	It has 5 settings.
Question:	Does this heater have electronic ignition
Answer:	As Dan mentioned your home should already be regulated at the gas meter which gets regulated before your home. One good way to check - if you have a natural gas stove or boiler check to see if they are piped directly from your home piping gas line or does it go through a regulator then into your appliance. Most homes in the US are set up this way. This is something that can be done rather easy you should be able to connect it yourself. However if your unsure or don’t feel comfortable than you should seek the help of someone that can.
Question:	I installed this unit and the small screen above the heating area getting very hot and is melting a bit in a few places. Is this supposed to happen
Answer:	I can't find one. They operate on normal home gas pressure which sources say is 1/4--60 psi. I have the Blue Grass Living (blue flame) 10,000 btu heater. It operates to perfection, and it burns so cleanly! If you ever lose electrical power, these heaters will keep right on heating!! A lot of words here; hope they help....
Question:	Can this heater be hooked up to a on/off switch
Answer:	It is thermostatically controlled. However you could not connect your Nest thermostat up to it. The thermostatic controls will be done via the Knob on top.

Product description

This Radiant 30,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution, even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat, warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**

• 30,000 BTU Natural Gas heater to heat spaces up to 750 sqaure feet.
• Radiant heat burner. Use-Supplemental heat in cold rooms, Additions, Sun rooms, Cabins
• Automatic low oxygen shut-off system (ODS). CSA Certified
• Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
• Theromostat, legs and wall mounting hardware included. Fuel Consumption/Burn Rate (Gal/Hr) - 0.030 MCF

User questions & answers

Question:	Does it have a blower
Answer:	The blower is not included. You can purchase the blower separately.
Question:	Does it come with a warranty
Answer:	Yes..it should have the warranty information down in the description/information section where you are looking at this particular item.
Question:	How well does the thermostat work? Would like to leave this unit on in the garage and maintain a set temperature
Answer:	Thermostat works well. It's not a set temperature thermostat though. You pick a number or in between spot that feels comfortable and leave it. I never leave it on overnight though.
Question:	What are the pros and cons of infrared verses convection nat. gas heaters
Answer:	Infrared is much warmer to me. We ordered 3 heaters before we found this one. It is the BEST and worth every penny that we paid for it. It heats quickly and evenly. I will never own another brand of heater.

Product features

Radiant Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and Infrared (or radiant heat). The difference in these types of heat are how the warm.

The Infrared heater warms objects. It doesn’t warm the air like a Blue Flame. It can be put in an area with objects which the heater will heat and then the object will heat the air. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Product description

The SunStar Heating Products ceramic heater is ideal for spot heating or area heating of remote locations, farm buildings, shops, service areas, pump houses or other hard-to-heat spaces, providing both fuel efficiency of radiant heat and installation flexibility (not recommended for car washes). this is an energy-saving direct spark ignition heater and can be controlled by a line voltage or 24V thermostat (sold separately). may require the following second stage regulators prior to the heater based on gas supply pressure: a regulator up to 2 PSIG line pressure or a regulator above 2 PSIG line pressure (both sold separately). not certified or approved for residential use. Indoor use only. U.S.A. Note: please review the detailed installation & operating instructions (attached) for other specific installation requirements (gas Type, gas pressure, ventilation etc.) prior to purchasing the heater.

User questions & answers

Question:	how does it vent
Answer:	Hi, Elizabeth! Yes, you can connect this unit to your Echo Dot via Bluetooth. You just need to put this unit into pairing mode and connect it. You may check the link below for more details: https://helpguide.sony.net/speaker/srs-xb01/v1/en/contents/TP0001705160.html?search=pairing ~Earl

Product description

The Bluegrass Living ventless infra-red radiant gas wall space heater operates on Natural Gas and gives you 30,000 Maximum BTU of reliable supplemental heat that can heat up to 1,450 sq. ft of living space. The space heater is perfect for not only just taking the chill out of the room but also for keeping your area warm on even the coldest winter days.

This radiant heater features the latest advancement in vent free infrared plaque burner design which uses larger plaques to provide more heat per plaque. Vent-free gas plaque space heaters are clean burning, fuel efficient and safe to use. Operating like the sun, infrared radiant heaters provide instant direct radiant heat to people or objects in the room.

This infrared plaque cabinet heater is equipped with a thermostat which allows you to maintain and control the desired room temperature. The easy push-button ignition makes it simple to start while the oxygen depletion sensor features an automatic shut-off design to keep your home safe. This heater can be mounted to the wall or the floor with the included mounting brackets and hardware. No electricity is required which is perfect for keeping you warm during power outages.

A great additional feature, this heater includes a pre-installed blower which helps spreads warm air throughout the room. The blower has two operating modes, thermostat and manual. In the thermostat setting, the blower will cycle on and off automatically as it senses heat from the heater. In the manual mode, you can choose from either on or off settings. The blower requires standard 120V household current but if the power goes out, your heater will still operate without the blower.



Added Value: Base Feet Included, a $50 value!



Product Features:

•Operates on Natural Gas Only

•30,000 Maximum BTU

•Heats Up To 1,450 Sq. Ft.

•Thermostat Control - The built-in thermostat automatically cycles the heater on and off to maintain your desired heat setting. Variable heat settings allow you to dial in your comfort level.

•Slim cabinet design takes up less room space.

•Economical: 99.9% efficient. No outside duct or chimney needed!

•Heat for only pennies an hour!

•Safety Assurance: O.D.S. (Oxygen Depletion Sensor) included with automatic shut-off.

•No electricity required to operate heater!

•Push Button Piezo Ignition System.

•Includes wall mounting bracket to mount to a wall

•Includes base feet to mount to the floor.

•Certified to ANSI standards for safe, clean-burning heat.

•PFS Certified

•Product Dimensions: 24.25" H x 25.5" W x 8.5" D

•Product Weight: 25.8lbs.

•Vent-Free Gas Space Heater Model Number B30TNIR-BB

•1 Year Limited Warranty



What's In the Box

•Vent Free Heater - Qty. 1

•Thermostat Blower - Qty. 1

•Wall Mounting Bracket - Qty. 1

•Base Feet - Qty. 2

•Hardware Pack - Qty 1

• ASSEMBLED IN USA - Product is proudly assembled in the USA. Skilled American workers manufacture the parts, assemble, and test our products. Only high-quality materials and parts are used in the manufacturing of our products. Our factory features state of the art manufacturing equipment.
• TECHNOLOGY - Maximum 30, 000 BTU Operates on using Natural Gas only Which Heats up to 1, 450 sq. ft Area.
• DEPENDABLE - Thermostat Control – The control automatically cycles the burner on and off to maintain a desired room temperature, Ideal for greater heat flow that could add the warm atmosphere in your room.
• ECONOMICAL - 99. 9% efficient with Vent Free gas burner. No outside duct or chimney needed! Environmental Protection and Energy Conservation.
• SAFE - Push button Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected.
• 1 Year Limited Warranty

User questions & answers

Question:	is an external 2 stage regulator for the propane 30,000 BTU unit necessary
Answer:	Hi lhugums, Yes, you may use the Bluetooth function or the Audio In jack. You may find this link helpful: https://www.sony.com/electronics/support/portable-speakers-srs-series/srs-xb01/articles/00196782 ~Ralph
Question:	is an external 2 stage regulator for the 30,000 BTU unit necessary
Answer:	Its a nice size for a little gathering
Question:	Do the unit get physically hot to the touch
Answer:	21”
Question:	Can the unit be mounted to the ceiling facing straight down or does it have to be mounted upright to a wall
Answer:	Yes it makes sound when the water hits the glass but that’s normal. It’s not loud enough to overpower the music

Product features

Bluegrass Living Vent Free Infrared Gas Space Heater With Blower and Base Feet - 20,000 BTU, Model# B20TNIR-BB

The Bluegrass Living ventless infra-red radiant gas wall space heater operates on Natural Gas and gives you 30,000 Maximum BTU of reliable supplemental heat that can heat up to 1,450 sq. ft area. The space heater is perfect for not only just taking the chill out of the room but also for keeping your area warm on even the coldest winter days. The easy push-button ignition makes it simple to start while the oxygen depletion sensor features an automatic shut-off design to keep your home safe.

Blower and Base Included

Bluegrass Living Vent Free Infrared Gas Space Heater With Base Feet comes with the Base Feet and the Blower preinstalled! This allows an easy initial setup and cost savings for you!

Thermostat Control

Thermostat Control allows you to set the thermostat to your ideal comfort level. Just one push of the button to enjoy a great source of dependable, affordable heat.

Wall Mounting

Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.

Safety

Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.

Product description

Provides plenty of heat even during power outages - requires no electricity. Thermostat is included for comfort control. Natural Gas. For indoor use within the following clearance to combustibles measurements: 34in. from ceiling, 30in. from sides of heater, 30in. from back and 68in. from the base. Recommended for buildings with 12ft. to 15ft. ceilings. CSA design certified. Thermostat Included.

• Efficient, cost effective infrared heat
• For use in buildings with 12 to 15 ft ceilings
• Clearances: Top - 36", Sides & Back - 30", Below - 68"
• Heats up to 1000 sq. ft.
• No electricity required, Maintenance free; no moving parts

User questions & answers

Question:	Can someone tell me what the width and length of the burner, without the shield around it
Answer:	7 x 19 inches
Question:	What are deminseions of this item
Answer:	28 inch length, 15 inch wide. 12 inch hight
Question:	Is this a ventless system. I want to use it in my insulated garage
Answer:	I have this system in my insulated garage and I put a 10x10 vent near where I hung it. Also I put a carbon dioxide detector to be safe. Heater works great!!
Question:	I live in Northern Alberta, Canada, I have an insulated 25' x 25" x 10' high ceiling will this heater be enough to heat to 55 degree's F efficently
Answer:	My shop is 25 x 30 16 high ceiling insulated and in the 11 deg weather we had this last winter it got it to 50 deg but I had to put a shop fan in the loft to blow the heat down

Product description

ProCom Heating’s infra-red space heaters are assembled in the USA and feature a new slimmer cabinet design with the latest advancement in vent free infra-red burner design. This NEW advancement provides more heat per ceramic plaque. No electricity is required which is perfect for power outages and installation. This unit has an easy to use manual control which operates with high, medium and low settings. Product Features: Operates on Natural Gas Only 30, 000 Maximum BTU Heats Up To 1, 450 Sq. Ft. Manual Control - High/Medium/Low/Off Settings Slim cabinet design Economical: 99. 9% efficient. No outside duct or chimney needed! Heat for only pennies an hour! Safety Assurance: O. D. S. (Oxygen Depletion Sensor) included with automatic shut-off No electricity required to operate heater! Push Button Piezo Ignition System Product Dimensions: 24. 25" H x 25. 5" W x 8. 5" D Product Weight: 24. 7 lbs. 1 Year Limited What's in the Box? Vent Free Heater - Qty. 1 Wall Mounting Bracket - Qty. 1 Hardware Package - Qty. 1

• ** ASSEMBLED IN USA - Product is proudly assembled in the USA. Skilled American workers manufacture the parts, assemble, and test our products. Only high-quality materials and parts are used in the manufacturing of our products. Our factory features state of the art manufacturing equipment.
• ** TECHNOLOGY - Maximum 30, 000 BTU operates on using Natural Gas only which Heats up to 1, 450 sq. ft Area.
• ** DEPENDABLE - Manual Control – High/Medium/Low/Off Settings, Ideal for greater heat flow that could add the warm atmosphere in your room.
• ** ECONOMICAL - 99. 9% efficient with Vent Free gas burner. No outside duct or chimney needed! Environmental Protection and Energy Conservation.
• ** SAFE - Push button Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected.
• ** 1 Year Limited .

User questions & answers

Question:	Is the unit cool to the touch
Answer:	Power cord is estimated 3’. I had to come up with my own hanger because it was supplied with a wire harness and no way to attach it.
Question:	Is this approved for use in Massachusetts
Answer:	This heater is 70 inches long.
Question:	I try to use blower and keeps blowing out pilot light
Answer:	This heater can shine directly forward for 5-6 meters, and everything within this range can feel the heat.
Question:	I am trying to heat a hot yoga room to at least 110 degrees F. Does this unit automatically shut down at a certain temperature, at what temperature
Answer:	Nope

Product features

ProCom Heating Natural Gas Ventless Infrared Plaque Heater - 30,000 BTU, Model# MN3PHG

ProCom Heating’s infra-red space heaters are assembled in the USA and feature a new slimmer cabinet design with the latest advancement in vent free infra-red burner design. This NEW advancement provides more heat per ceramic plaque. No electricity is required which is perfect for power outages and installation. This unit has an easy to use manual control which operates with high, medium and low settings.

Infrared Heating

Infrared Flame Technology provides heat similar to the sun's radiant heat , providing a comfortable and affordable heating source.

Manual Control

Manual Control allows you to set for greater heat flow that could add the warm atmosphere in your room.

Wall Mounting

Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.

Safety

Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.

• DUAL USE - Comes with hardware for mounting on walls or ceilings. Also comes with an adjustable tri pod stand
• CARBON INFRARED TECHNOLOGY - Produces heat that is similar to the heat produced by the sun. The infrared rays emitted are easily absorbed by the surfaces in the area of the heater, which increases the temperature of their surroundings. As cool surfaces heat up, infrared heaters raise the ambient temperature of the space.
• SAFETY FEATURES - A protective metal sheath covers the heating elements. This means animals and children can touch the surface of our heater without being burned. The Briza has a built in sensor that will automatically shutoff the unit if it is tipped over, eliminating the possibility of a fire hazard
• 4 SEASON PROTECTION - With an IP 55 rating the Briza can withstand any degree of the elements, whether its rain, snow, sand, or dust the Briza will stand up to the harshest outdoor conditions for years to come. It is also great for indoor uses for when you want to stay warm in the garage, shed or your home.
• EFFICENT HEATING - Infrared heaters can make you comfortable indoors or outdoors no matter what the temperature is. Inside the heater, a hot coil is wrapped into a circle so that all of the heat can be transferred evenly. The heat produced is reflected by a special polished metal, a reflector, and the heat can be felt several yards in front of the heater. Also, Brizas heaters aren't affected by drafts or wind.
• TRIPOD STAND - Reaches up to 7 feet and has adjustable legs that extend far out for a stable base that eliminates the need for sand bags, or if stability isn't a concern it can be adjusted for tighter spaces
• BUILT IN TIMER - Set the timer from 1-9 Hours for the heater to automatically power off

User questions & answers

Question:	What is the total square footage it should cover
Answer:	Not this model, Dr 977Dr 975 they has enclosed motor
Question:	Could you hang this from the ceiling using chains
Answer:	Just doing a little search it looks like a NEMA 6-30. http://www.myrav4ev.com/forum/viewtopic.php?f=2&t=74&start=50 It would plug into something like this I believe. http://www.amazon.com/Leviton-061-05372-000-Power-Receptacle-Flush/dp/B000P9UZ92/ref=sr_1_1?ie=UTF8&qid=1387304424&sr=8-1&keywords=Nema+6-30
Question:	Amperage. This has to have amperage. What is the amount of amperage it uses
Answer:	If you have the right setup, it's OK to use
Question:	Can an extension cord be used
Answer:	No, it's another type of 220V plug. You can either change the plug or the receptacle. Frankly I wouldn't bother as you will be lucky to get a week with this heater before the blower motor fails.

Product features

Infrared Benefits

Infrared heaters produce heat that is similar to the heat produced by the sun. The infrared rays emitted are easily absorbed by the items in your home, which gently increases the temperature of their surroundings. As cool surfaces heat up, infrared heaters raise the ambient temperature of the room. Besides warming up your home, infrared heaters provide many other benefits.

The Latest Carbon Technology

• 93% heat efficiency, energy saving
• Infrared medium wave, infrared energy is easily absorbed by the human body
• Instant heat within SECONDS
• Ultra-low glare

More Benefits

Most heaters work through convection, gradually heating the surrounding air and letting it circulate until it's permeated the entire room, but infrared heaters emit a precise beam of heat that warms you directly by throwing out a steady stream of heat particles. With infrared heaters, you don't have to wait to warm up with you step in from the cold, like with ordinary heaters. You warm up rapidly, with fast acting heat rays that dispel the cold. They're also great if you're sitting on the couch or at your desk because their heat is focused on you and not the entire room.

Silent, Gentle & Healthy

Infrared space heaters work silently since they don't use a fan - they just radiate light! They're great for noise-sensitive environments such as bedrooms.

Hot coils are wrapped over the heat source so heat is transferred evenly. The heat is reflected by a polished metal so it extends out for several yards, creating a gentle, comfortable source of warmth.

Minimal Maintenance

The maintenance for infrared heaters is extremely minimal. Since there are no moving parts, there's no motor to wear out, air filters to replace or lubrication required. All you have to do is periodically clean the reflectors to keep your unit working perfectly.

Usage Recomendations

• Patio
• Workshop
• Garage
• Room Heating
• Outside Dining Spaces
• Green House
• Entry Way

Weather Proof

Whether its snow, rain or hail the Briza heater will always stand up to the elements. With a protective metal shielding no water or moisture will be able to effect the function of the heater.

Infrared Technology

Instead of warming the air like other conventional heaters, infrared heaters heat objects directly in their paths. Heating the air wastes energy and the benefits of the heat aren't felt immediately. The rays produced by infrared heaters penetrate and warm you beneath the skin.

Safety Features

With the automatic shutoff sensor the heater will automatically turn off if it ever senses that the unit has tipped over, therefore

Remote Control

All heaters come with a remote control so you can control your the power, heat level and timer from anywhere in the room or outdoor space.

Product description

Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using infrared heating technology, objects are warmed first similar to how the sun heats & feels. This Infrared Wall Heaters burn with 99.9% efficiency, and operates on Natural Gas only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. DEPENDABLE - Ideal for emergency or daily supplemental use ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT - Heater automatically adjusts to your desired temperature; just like your home thermostat SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT - One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.

• Natural gas ready (fuel conversion not permitted)
• Infrared technology works by radiating heat to warm objects first - similar to the sun
• Up to 30, 000 BTU's/hr heats up to 1, 000 sq. Ft
• Thermostat control knob automatically maintains your ideal heat level
• No electricity required allows for reliable back-up heating incase of an Emergency situation

User questions & answers

Question:	What kind of fan can be used for this heater
Answer:	Haven’t used it yet. Purchased and installed during summer.
Question:	I purchased a fan for the heater, but there are no wires to connect the fan to. Can the internal wiring be purchased
Answer:	Depends on how much you use it, if daily use Approx 3 weeks. If use at higher heat output levels could be slightly less, if barely use could be a little longer.
Question:	What size tanks can you use with it
Answer:	This model will work with either NG or LP gas. The bf30pmdg is LP gas only.
Question:	What are the clearance equirements, top, bottom, sides
Answer:	It’s a terrible idea to use the smaller tanks. The pressure in the 20lb tanks are much higher than a 100 lb tank. The flame is much higher with a small tank and will not shut off properly.

Product features

Infrared Technology

Similar to the way the sun works, infrared technology radiates heat to warm objects first, rather than the air.

Improved Circulation

Upgrade your unit with the optional fan (Model #WHF100 sold separately) for improved circulation in rooms up to 1000 sq. ft.

Floor Installation Option

Add on the optional base legs (Model #WBL100 sold separately) for floor installation.

Thermostat Control Knob

Automatically maintains your ideal heat level.

Product description

This Blue Flame 30,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**

• 30,000 BTU Natural Gas heater to heat spaces up to 1000 square feet
• Blue flame burner for even convection heat. Maximum Elevation (Ft)-4500. Fuel Consumption/Burn Rate (Gal/Hr)- .030 MCF
• Automatic low oxygen shut-off system (ODS). CSA Certified
• Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.included.Theromostat, legs and wall mounting hardware
• Fuel Type:Natural Gas.Not for use in bathrooms, bedrooms, or recreational vehicles

User questions & answers

Question:	if it has a thermostat, what temperature is it shutting off? I have a different fire place with a 73 degree shut off manufacturing setting,not enought
Answer:	I asked the manufacturer for the thermostate info. It has a knob on top from 1-5. 1-60.8°f 2-75.2°f 3-89.6°f 4-104°f 5-118.4°f He also said that they could vary slightly from heater to heater.
Question:	I don't see a pic or anything that shows where/how the fan mounts. Does anyone know
Answer:	The fan will mount on the back of the heater. There is a punch out that will be removed and the fan will go in it's place.
Question:	Would this heater work in a 2 car garage
Answer:	In short yes. we have this on the first floor of our house. it is not yet winter, but this is a 30,000 BTU heater; it heats the entire house fast - like 20 mins upstairs and down. I would say the same for a two car garage. I plan on moving this unit to the basement shop which is exposed to ground level in the back and unheated; basically a 1 car garage back there and I expect this to out perform. I will add one thing: this is the blue flame unit. I have had shop heaters before and prefer the radiant heaters (of which Mr Heater makes one just like this) - they have the clay looking elements in them that glow red/orange; those heaters will heat things in the space and then those items give off the heat. I used to aim one at my roll away tool box. in an area where you might have a lot of space up above, such as a loft the radiant version of this heater may be better as it will heat the items it is near with less heated air floating up. either way, this is a safe bet.
Question:	Does the mhvfb30ngt unit have an automatic igniter to maintain temperature or do you to to push an igniter switch to start it each time
Answer:	It has a pilot lit that will stay lit at all times, unless you turn the dial to the Off position. The heater will start up when the thermostat dial settings determines that it's time to turn the heater on.
Question:	I stripped the threads on the heater, how can i fix this
Answer:	You can tap it out if you have a tap and die set, otherwise you will have to order new parts
Question:	Want 30000 Btu radiant heater with blower
Answer:	The 30000 BTU heater will be the model number MHVFRD30LPT. Click on link provided to view the heater. https://www.amazon.com/Mr-Heater-Corporation-Radiant-MHVFRD30LPT/dp/B01DPZ56KU/ref=sr_1_1?ie=UTF8&qid=1514918538&sr=8-1&keywords=MHVFRD30LPT
Question:	Will this work with a 20 pound tank
Answer:	Yes, but you will need to add a regulator between the heater and the 20 pound tank for safety
Question:	So, it has no thermostat but output is variable? How does this work
Answer:	It does NOT have a thermostat, settings are either high or low. It will NOT turn on and off on it's own when reaching certain temperatures, it even says its NOT thermostat controlled in the manual.

Product features

Radiant Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and Infrared (or radiant heat). The difference in these types of heat are how the warm.

The Infrared heater warms objects. It doesn’t warm the air like a Blue Flame. It can be put in an area with objects which the heater will heat and then the object will heat the air. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Blue Flame Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and infrared (or radiant heat). The difference in these types of heat are how the warm.

The Blue Flame heater warms the air. It doesn’t radiate the heat like an infrared unit. It can be put in a narrow area because the heat rises and warms the area from the ceiling down. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Product description

Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This blue flame wall heater burns with 99.9% efficiency, and operates on natural gas only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. Operating heater above elevations of 4,500 feet

• Natural Gas Ready (Fuel conversion not permitted)
• Infrared Technology works by radiating heat to warm objects first - Similar to the sun
• Up to 12,000 BTU's/hr heats up to 300-sq ft; Thermostat control knob automatically maintains your ideal heat level
• No electricity required allows for reliable back-up heating incase of an emergency situation
• Oxygen depletion sensor will shut down the unit if oxygen were to be depleted
• Separately sold optional fan (WHF100) improves the amount of square footage the heat reaches in a quiet, yet powerful way!
• Separately sold optional base legs (WBL100) allows for stable floor mounting
• 1 Year Warranty

User questions & answers

Question:	How many btu
Answer:	It does not get hot enough to burn you but it definitely heats the outer shell. Good unit but if you have little kids they would get burned, it's not childproof.
Question:	Is this heater 30,000 btu
Answer:	Chech state regulations
Question:	What size is the ng fitting
Answer:	I’ve never used the blower but I did have two models of these and constantly had a problem with the pilots
Question:	This model irss30lpt-2p is for liquid propane isn't it
Answer:	No, This is manually controlled. It will run until you shut it off.

Product features

Infrared Technology

Similar to the way the sun works, infrared technology radiates heat to warm objects first, rather than the air.

Improved Circulation

Upgrade your unit with the optional fan (Model #WHF100 sold separately) for improved circulation in rooms up to 1000 sq. ft.

Floor Installation Option

Add on the optional base legs (Model #WBL100 sold separately) for floor installation.

Thermostat Control Knob

Automatically maintains your ideal heat level.

Product description

ProCom Heating’s infra-red space heaters are assembled in the USA and feature a new slimmer cabinet design with the latest advancement in vent free infra-red burner design. This NEW advancement provides more heat per ceramic plaque. No electricity is required which is perfect for power outages and installation. This unit has an easy to use manual control which operates with on or off settings.



Product Features:

•Operates on Natural Gas Only

•10,000 Maximum BTU

•Heats Up To 500 Sq. Ft.

•Manual Control - On/Off Settings

•Slim cabinet design

•Economical: 99.9% efficient. No outside duct or chimney needed!

•Heat for only pennies an hour!

•Safety Assurance: O.D.S. (Oxygen Depletion Sensor) included with automatic shut-off

•No electricity required to operate heater!

•Push Button Piezo Ignition System

•Product Dimensions: 21.2" H x 15.79" W x 6.85" D

•Product Weight: 13 lbs.

•1 Year Limited Warranty



What's in the Box?

•Vent Free Heater - Qty. 1

•Wall Mounting Bracket - Qty. 1

•Hardware Package - Qty. 1

• ** ASSEMBLED IN USA - Product is proudly assembled in the USA. Skilled American workers manufacture the parts, assemble, and test our products. Only high-quality materials and parts are used in the manufacturing of our products. Our factory features state of the art manufacturing equipment.
• ** TECHNOLOGY - Maximum 10,000 BTU operates on using Natural Gas only which Heats up to 500 sq. ft Area.
• ** DEPENDABLE - Manual Control – On/Off Settings, Ideal for greater heat flow that could add the warm atmosphere in your room.
• ** ECONOMICAL - 99.9% efficient with Vent Free gas burner. No outside duct or chimney needed! Environmental Protection and Energy Conservation.
• ** SAFE - Push button Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected.
• ** 1 Year Limited Warranty.

User questions & answers

Question:

What model external regulator should I use for natural gas hook up

Answer:

Not sure what you're referring to. The one lb. bottle hangs suspended when connected. I wouldn't recommend getting this model. Get the model MH12C if you can. The regulator broke after a couple months and I couldn't return it. Instead I bought the regulator that was for the MH12C and adapted it to fit the MH15C. Since then it's been working great for a year. I also recommend purchasing the hose adapter so you can run off a 20 lb. bottle. It'll last a lot longer

Product features

ProCom Heating Natural Gas Ventless Infrared Plaque Heater - 10,000 BTU, Model# MN1PHG

ProCom Heating’s infra-red space heaters are assembled in the USA and feature a new slimmer cabinet design with the latest advancement in vent free infra-red burner design. This NEW advancement provides more heat per ceramic plaque. No electricity is required which is perfect for power outages and installation. This unit has an easy to use manual control which operates with on or off settings.

Infrared Heating

Infrared Flame Technology provides heat similar to the sun's radiant heat , providing a comfortable and affordable heating source.

Manual Control

Manual Control allows you to set for greater heat flow that could add the warm atmosphere in your room.

Wall Mounting

Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.

Safety

Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.

Product description

If you're shopping around for a natural gas heater that can deliver on the heat while offering simple operation, then Procom heating's 10,000 BTU natural gas infrared wall heater could be just the heater you've been looking for. Thanks to its usage of infrared heat, this wall heater warms people and objects in the room first, operating much like the sun's radiant heat. The heater uses reliable natural gas and can easily accommodate the warming needs of a T-square foot space. It runs at 10,000 BTU, is vent-free, equipped with manual controls for easy operation, push button piezo ignition and a cool touch cabinet. So when your home could use an additional source of heat, choose the easy and reliable route with Procom heating's 10,000 BTU natural gas infrared wall heater. Because you and your family deserve a little extra comfort.

• Natural Gas infrared wall heater Uses 10,000 BTU
• Heater Uses Natural Gas and is vent-free
• Equipped with manual controls and push button piezo ignition
• Comes with a cool touch cabinet and can easily accommodate a 300 sq. Ft. Space
• Infrared heat warms People and objects in the room first, and operates similarly to the sun's radiant heat

User questions & answers

Question:	Does it have a thermostat
Answer:	It says NG infrared natural gas infrared in guess its natural gas

Product description

ProCom's Infrared Plaque Ventless Gas Space Heaters make supplemental heating fast and easy! Just push a button for easy ignition, stand back and enjoy a great source of dependable, affordable heat. These infrared plaque heaters works just like the sun's radiant heat, warming objects in the room first! Product Features 6,000 Maximum BTU Heats Up To 150 Sq. Ft. Operates off Liquid Propane Gas Only Manual Control – On/Off Settings Space saving design without sacrificing beauty Economical: 99.9% efficient. No outside duct or chimney needed! Heat for only pennies an hour Safety Assurance: O.D.S. (Oxygen Depletion Sensor) included with automatic shut-off No electricity required! Push button Piezo ignition Wall mounting bracket included CSA certified Product Dimensions: 19 1/8” H x 14 1/8” W x 6 3/8” D

• Liquid propane Gas infrared wall heater operates at 6,000 BTU
• Heater Uses liquid propane Gas and is vent-free
• Equipped with manual controls and push button piezo ignition
• Comes with a cool touch cabinet and can easily accommodate a 150 sq. Ft. Space
• Infrared heat warms People and objects in the room first, and operates similarly to the sun's radiant heat

User questions & answers

Question:	is the heater quite
Answer:	A one pound bottle on medium setting will last about 1-1/2 hour so figure at least 25 hrs for a 20 pounder.
Question:	Do you know if this heater has a blower
Answer:	No, this is a window unit and should not be installed into a wall.
Question:	How many BTUs
Answer:	Yes it will switch by itself if you set both settings on automatic! I love this unit it has saved us a lot on our electric bill!
Question:	I notice the ad says 'Natural' gas. Just what does that mean? Can I use gas that comes in a portable cylinder? I guess you would call it 'Propane
Answer:	UPDATED. The air flow sections move side to side and up and down. InstalLatin was not so simple. Instructions are not publised well. Now that installed it cools amazingly. Veryy pleased with this product.

Product features

ProCom Liquid Propane Gas Ventless Plaque Heater - 6,000 BTU, Model - ML060HPA

Infrared Plaque Ventless Liquid Propane Gas Space Heaters make supplemental heating fast and easy! Just push a button for easy ignition, stand back and enjoy a great source of dependable, affordable heat. These infrared plaque heaters works just like the sun's radiant heat, warming objects in the room first!

Infrared Heating

Infrared Flame Technology provides heat similar to the sun's radiant heat , providing a comfortable and affordable heating source.

Controls

Manual Control with On/Off Settings. Just push a button for easy ignition, stand back and enjoy a great source of dependable,affordable heat.

Wall Mounting

Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.

Safety

Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.

Product description

5 Plaque Infrared, 30,000 BTU, Natural Gas, Vent Free Wall Heater, Variable Heat Control, Piezo Ignition, Heats Approximate 1,000 SQFT, For Optional Blower Use #20-6127 & Optional Floor Stand Legs Use #20-5345, Not Included. NOTE: The state of California prohibits the use of this product. Please check your state and local codes prior to purchase. Due to the built-in oxygen safety sensor vent free products may not work properly at elevations of 4500 ft.

• Vent free infrared burner
• Increased BTU output; No electricity required
• Built-in oxygen depletion sensor
• Adjustable heat settings; Manual control features
• Optional floor stand (20-5345); Optional blower (20-6127)
• Heating coverage:- 1000 square feet

User questions & answers

Question:	Is the base of this heater is wide enough to just sit the heater down without legs? I want to replace fireplace gas logs with it
Answer:	No. You will need Sony part#1-763-963-21
Question:	Has anyone had problems with it going out on its own and having to relight it? i have a 30,000btu dyna glo that just goes out (off) occasionally and
Answer:	Yes, and its been working excellent.
Question:	Does it come with wall hardware
Answer:	It’s the number of cubic feet of air lived per minute. For instance, if your office space is 12 feet long and 12 feet wide an 16 feet high, and you want to exchange the total volume of air in your office, you need a fan with a CFM rating of 38 or higher. If you have a slighty smaller office and only want the air exchanged every 4 hours the you only need a fan with a CFM rating of 6.
Question:	would use this with blower in basement, wall mount near floor. Is it safe unattended? UL rated? clean basement but dont want a cobweb causing fire
Answer:	41 inches.