11 best base board heaters

Product description

Cadet Manufacturing 09954 White Baseboard Hardwire Electric Zone Heater 240V, 1000W, 48" requires a thermostat. 25 gauge steel. 20 gauge junction box with ground, all metal and powder coated. UL listed.

User questions & answers

Question:	Can i wire 2 or 3 of them together an what size breaker
Answer:	When the A is ON the thermostat is controlling heat. Use + or - to set desired temp. When the A is OFF, the heater is simply on and heating away. If it's in a small room (10x10 say) it can easily heat that space to 90 degrees. So use the thermostat.
Question:	Does this require a single pole or double pole t-stat
Answer:	It's completely dark. No glowing. The only light emitted is from a digital display.
Question:	Anyone aware of the energy efficiency of this heater
Answer:	the 5622 is white, the 5620 is grey and the 5624 is black. I can't seem to find any other differences. You can check it out for yourself here: http://www.laskoproducts.com/low-profile-heaters/
Question:	getting this for a 4 season porch. I need a separate thermostat. Will this work with the Nest thermostat
Answer:	It's not going right to 77.... it's saying that the temperature in the room is 77. The digital display will always read the current temperature in the room, so if you're setting it to keep the room at 73, then it won't come on if it's already 77. If you're not warm enough, then you'll have to set it higher than what the thermometer on the heater is reading.

Product description

High-impact Lexan end panels with built-in handles. Built-in thermostat with power light with an attractive chimney fin element design. Its 100% energy efficient with 120V operationIts made in USA Its best suited for dens,bedrooms and basements.

• High-impact Lexan end panels with built-in handles
• Built-in thermostat with power light with an attractive chimney fin element design
• Its 100% energy efficient with 120V operationIts made in USA Its best suited for dens,bedrooms and basements

User questions & answers

Question:	Dual Wattage, does that mean it can be hard wired
Answer:	No, this unit was not designed to be hard wired. It has a suitable electrical cord with a plug on it, intended to be plugged into a 20 amp wall outlet. Dual wattage means it has a high and a low heat output, which is controlled by a switch that comes on the unit.
Question:	Is there any sort of safety screen for this? I'd be concerned about small things falling into it, or children pushing small toys into it
Answer:	There is no safety screen at all on this heater. You may be able to attach a heat resistant mesh on the outside of the heater for little hands/small things not to find their way into the heater. The heating element does sit way back and inferiorly on the heater but without the screen it is pretty easy for curious hands to find their way into it. Hope this helps.
Question:	Is this on oil filled heater
Answer:	No. It's a convection resistor with fins.
Question:	I just purchased and set up and indeed the smell is awful. For those who stuck it out, how long until the smell dissipates
Answer:	It's been a while since I purchased mine, but I left it on for a couple of hours in my garage before I started using it, and there's no smell at all when I use it now.

Product description

' Electric Baseboard Heater, Conventional, Residential, Voltage 240/208, 1 Phase, BtuH Output 6824/5118, Mounting Type Wall, Length 96 In., Depth 2-1/4 In., Height 6-3/4 In., 60 Hz, 2000/1500 Watts, 8.33/7.21 Amps AC, Color White, Finish Powder Coat, Housing Material Steel, Standards UL '

• Price For: Each Housing Style: Conventional Standards: UL Hz: 60 Finish: Powder Coated Mounting Type: Wall Item: Electric Baseboard Heater Height: 6-3/4" Housing Material: Steel Color: White Phase: 1 Primary Application: Residential Depth: 2-1/2" Length: 96" Amps AC: 7.21/8.33 BtuH Output: 5118 / 6824 Watts: 1500/2000 Voltage: 208/240
• Country of Origin (subject to change): United States

User questions & answers

Question:	is there a temperature control on the unit or does it require a separate thermostat
Answer:	You need to purchase a thermostat regardless...on the unit or on the wall
Question:	How many sq ft does this cover
Answer:	I have two units in a combination living room, kitchen and dining area and it’s toasty.
Question:	Are these heaters energy efficient
Answer:	Not terribly but we were operating on 100 per cent electric heaters as we are having to replace our wood burner which these heaters were doing 100 per cent of the heating this past winter in Michigan.
Question:	How many square feet with this heat? I have a 500 square foot room, will I need one or two of these to keep it toasty
Answer:	I would suggest two.
Question:	I returned you product to a local Kohls and i received an email today that the product was never received. Can you give me some info on this please
Answer:	Don't waste your money.
Question:	What size room with minimal insulation will this heat
Answer:	If it is a room with a door and not opened to other rooms it will heat about a 10' x 10' room.
Question:	do all the cadet thermostat come with a wiring diagram
Answer:	Your question says "thermostat" but this unit does not come with a thermostat. It does have a wiring diagram and is very easy to install but you do need a separate baseboard thermostat to control this.
Question:	Does this unit have any sort of control? thermostat? on-off switch? high-low control
Answer:	This unit does not come with a thermostat, however the thermostat would be used as an on/off switch as well as a temperature control. The unit does have a high-temperature safety shutoff feature.

Product features

36" Electric Baseboard, White

• Practical design is ideal for new construction and built to last
• Easy installation with pre-punched knockouts at 1-inch intervals
• Universal wiring available at either end
• Proven construction helps maximize surface area and funnel heated air
• Place under a window for best results
• Rest easy—includes high-temperature safety shutoff feature
• Durable, powder-coated finish stands up to nicks and scratches
• Proudly made in the USA

Product description

Stiebel Eltron 074058 Model CK 15 E Wall-Mounted Electric Fan Heater, 120 Volts, 1500 Watts, 12.5A, 5118 Btu/hr Rated Output, 18W Shaded Pole Motor, Extremely Quiet Operation at 49.7 dB(a)

The CK, CKT, and CK Trend are designed and made in Germany. These elegant, surface-mount fan heaters are extremely quiet. They are a simple solution to quickly add heat to a room that may not get enough heat from a central source, as sometimes happens with a mini-split retrofit, or they can add heat to a space that never had it before, like a porch retrofit. CK, CKT, and CK Trend heaters have an integral thermostat, but the CK can be linked to a central thermostat if it is installed in a room larger than 215 sq. ft.Stiebel Eltron CK wallmounted fan heaters use a small, quiet fan to pull in room air and send out heated air. These heaters are perfect for spaces like bathrooms that already have a primary heat source, but may need a little extra heat added quickly.

Key Features

• Sleek European surface-mount design
• Extremely quiet operation at 49.7 dB(a)
• Built-in thermostat for maximum comfort
• Downdraft design heats space evenly
• Quality German manufacturing
• Frost protection setting
• Ideal anywhere quick heat is needed

Specifications

• Voltage: 120V
• Wattage: 1500W
• Amperage: 12.5A
• Rated output: 5118 Btu/hr
• Recommended circuit breaker size: 15A
• Minimum wire size (copper): 14 AWG
• Heating element: Nichrome wire
• Thermostat & high limit: Bimetal type
• Motor: 18W shaded pole
• Blower: Galvanized steel, squirrel cage type
• Temperature range: 41°F – 86°F / 5°C – 30°C
• Frost protection setting: 45°F / 7°C
• Operating noise: 49.7 dB(a)
• Dimensions (HxWxD): 18-1/8" x 13-3/16" x 4-13/16"
• Weight: 8.0 lbs

From the Manufacturer

Stiebel Eltron CK 15E Wall Mounted Electric Fan Heater-120V/1500 watts offers and exciting room heating alternative for new construction and renovation projects. This unit is an ideal replacement for recess-mount heaters.

• Surface mount design
• Quality construction
• Quiet operation
• Built in thermostat for maximum comfort
• Reliable performance.Heat output for the CK 15E is 5122 BTU/hr

User questions & answers

Question:	How long is the chord
Answer:	there is no power supply cord,... it is a heater that must be hard wired directly with home wiring,.. easy to do with a junction box directly behind top area of heater,. i'm satisfied with the stiebel and purchased two of them for each bathroom,. there are 110v and 220v models note this!
Question:	how do you hook up this heater, what is necessary to buy to hook up
Answer:	zzbottom is riight. DO NOT USE AN EXTENSION CORD!! If you don't know how to connect the electricity into the heater I would advise against you installing it yourself. Call an electrician.
Question:	What are wall clearances? Thanks
Answer:	I am trying to find out if this heater can be mounted in a travel trailer. I have about 152 sq. ft. and I am very limited on space to mount it. the best place to mount would be closer to the front and on a wall. the problem is the bed is only about 3 feet from the wall. has anyone got any ideas or do they make a heater with a blower that mounts in the ceiling
Question:	does it have a fan setting without heat
Answer:	Mine does not. Though numbered, there are like three settings of heat. It shuts down temporarily to adjust heat. I have one in bathroom. It does not function as a fan.

Product features

Made in Germany

All CK heaters are made by us in our factory in Germany. We pride ourselves on a reputation for engineering & manufacturing excellence since 1924.

Ultra quiet fan

CK and CKT heaters have galvanized steel, squirrel cage type blowers that operate at a quiet 49.7 dB(a). The glass-reinforced poly-carbonate, radial type blower in CK Trend heaters operates at an even quieter 49 dB(a).

Even-heating down-draft design

CK and CKT heaters pull in cool room air from the top and blow warm air out the bottom. This down-draft design helps to evenly heat a space for maximum comfort.

Stand-alone or supplemental heat

CK heaters can be the sole heat source for small rooms. They can also supplement heat to a room that doesn’t get warm enough from a central source, as sometimes happens with a mini-split retrofit.

Built-in thermostat

All CK heaters have an integral thermostat for easy heat adjustment. CK and CKT heaters can be controlled by a wall thermostat in a room larger than 215 sq. ft.

Booster timer on CKT

The CKT booster timer outputs heat at maximum for up to 60 minutes. When the timer goes off, the CKT reverts to its thermostat setting, maintaining comfort at the original setting.

Frost protection setting

CK heaters have a frost protection setting. The lowest thermostat setting will maintain above freezing temperatures in an appropriately sized space.

CK Trend On/Off Switch

The CK Trend’s convenient and positive on/off switch completely shuts the heater off when it is not needed. The off position will disable the frost protection setting.

Installation notes

These heaters are not supplied with a cord and must be hard-wired.

CK and CKT models stick out 5“ from the wall and the CK Trend models 5⅛”.

Because these are fan heaters that blow warm air out the bottom, the recommended installation location is about 6-8” off floor, with 4” for a minimum.

All CK heaters should be mounted vertically.

Observe all installation manual precautions regarding minimum allowed clearances between the installed appliance and any hard surfaces.

Do not allow combustible materials on or near the heater.

• POWERFUL PERFORMANCE: This 1500 Watt convection baseboard heater is recommended for medium-sized rooms and includes 2 heat settings and an adjustable thermostat for easy temperature control.
• ADVANCED SAFETY: Features an advanced safety system that includes a safety tip-over switch, stay-cool body and overheat protection sensor.
• SILENT OPERATION: This electric baseboard heater operates quietly to ensure that room occupants aren't disturbed. Keep your TV or music at a reasonable level and enjoy normal conversation without distracting noise.
• DENT-PROOF ENDS: The end panels on this stylish, low-profile convection baseboard heater are dent-proof, so it won't start to look beat up as it's used year over year.
• SAVE MONEY: This electric baseboard heater allows you to heat the room you're in rather than turning up heat throughout the house, helping to keep home heating costs down.

User questions & answers

Question:	Are the controls digital or manual
Answer:	Control is manual knob and on/off switch.
Question:	I'm looking to keep a cabin bathroom above freezing while I'm away. What's the lowest temperature this unit can be set to
Answer:	I don't remember the exact lowest temperature, but I used mine for something similar with my bathroom (I keep the door closed to keep my pets out of it, and as a result it gets cold, so having it in there kept it warm).
Question:	Does it rattle when cycling on or off? Thank you
Answer:	This does not rattle.
Question:	Does this just plug in to a socket
Answer:	Yes it plugs into a regular socket

Product features

Safety First

Rest assured that you won't have to worry about any pets, little children or absent-minded adults due to the heater's advanced safety system. It includes a safety tip-over switch that cuts power if your heater is accidentally knocked over, a stay-cool body and an overheat protection sensor that prevents it from getting too hot.

Quiet Operation in a Stylish Design

The electric baseboard heater delivers silent operation to ensure that no one is disturbed. Read a book, watch TV or chat without being distracted by annoying background noise. The sleek, low-profile white heater features dent-resistant end panels for durability, so the unit will look stylish for years to come.

Save on Heating Costs

If you're looking for a way to save on home heating bills, look no further than this electric baseboard heater. It allows you to keep the room your're in at a warm and comfortable level while lowering the heat in the rest of your home, particularly in unused areas.

User questions & answers

Question:

Can you control the temperature

Answer:

It has a thermostadt that can be digitaly set to the desired temp. Now whether it can be set as low as 45 degrees I am not sure but you surely can set if for 50 degrees and it will function very well. I have a 400 square foot den and on the coldest days, and I am talking 20 degrees below, it will run you out of the room when set on 70 degrees. I had to set it at about 65 degrees to tolerate the heat. This heater really performs well. To answer your question will it turn off once the temp is reached...the answer is YES it will and turn on when it drops below the desired temp too.

Product description

Cadet Manufacturing 05532 White Baseboard Hardwire Electric Zone Heater 120V, 750W, 6.25A, 36" requires a thermostat. 25 gauge steel, 20 gauge junction box with ground, all metal, powder coated. UL listed.

• Requires A Thermostat
• 25 Gauge Steel
• 20 Gauge Junction Box With Ground, All Metal, And Powder Coated
• UL Listed Heater
• Requires A Thermostat
• 25 Gauge Steel
• 20 Gauge Junction Box With Ground, All Metal and Powder Coated
• UL Listed Heater

User questions & answers

Question:	I returned you product to a local Kohls and i received an email today that the product was never received. Can you give me some info on this please
Answer:	This is a link from Home Depot I used when I purchased mine. https://www.homedepot.com/catalog/pdfImages/0c/0c48b303-97be-48ec-82b6-ff341b740842.pdf excellent heater. I love it
Question:	What size room with minimal insulation will this heat
Answer:	You may use an extension cord that is designed to handle 15 amps. This cord can pull up to 12 amps. A good appliance style, one outlet 3 prong 12 gauge cord will handle this. Do not plug anything else into this cord. Always use the shortest length extension cord possible. IE Don't use a 25' extension cord for this 8 foot run. A six foot 12 g. 3 prong would be all that is needed.
Question:	do all the cadet thermostat come with a wiring diagram
Answer:	my experience is a 300 to 500 sq ft. but it also depends on how high the ceilings are. This is great heater, but dont expect it to be quick heating. Takes about 15 minutes for the room to heat up.
Question:	Does this unit have any sort of control? thermostat? on-off switch? high-low control
Answer:	there is a control, you can set so that it keeps the area heated but it 1000w all the time turn it down it comes on less.

Product features

36" Electric Baseboard, White

• Practical design is ideal for new construction and built to last
• Easy installation with pre-punched knockouts at 1-inch intervals
• Universal wiring available at either end
• Proven construction helps maximize surface area and funnel heated air
• Place under a window for best results
• Rest easy—includes high-temperature safety shutoff feature
• Durable, powder-coated finish stands up to nicks and scratches
• Proudly made in the USA

Product description

Attractive Northern white color, slim design. One screw allows for easy access to the large wiring compartment Screw is placed at an angle to allow for carpet access ease. Large wiring compartment with ground screw, enables fast wiring and ease of installing unit mount stat FTA-2A. Baseboard can be wired from either endDesigned for quiet operation, no popping and pinging.

• Attractive Northern white color, slim design
• One screw allows for easy access to the large wiring compartment Screw is placed at an angle to allow for carpet access ease
• Large wiring compartment with ground screw, enables fast wiring and ease of installing unit mount stat FTA-2A
• Baseboard can be wired from either endDesigned for quiet operation, no popping and pinging

User questions & answers

Question:	does this include the heating element
Answer:	Yes, it is a complete unit ready to hook up to your wiring. It does not include a thermostat, though.
Question:	what is the lenth
Answer:	Kerm,Good morning. The dimensions of this baseboard heater are: 72.0" L x 2.75" D x 6.75" H. If you'd like to review all the specifications, the document link is http://www.marleymep.com/en/assets/pdf/ZBL-QMKWA.pdf.Please let us know if you have any additional questions or if we can assist you further.Thanks,Jeff CousinsOperations Manager

Product description

Description

In winter, clothes always take a long time to dry. At this time, all you need is a baseboard hardwire electric zone heater like ours. In addition to drying clothes, our heater can quickly heat the entire room.

The wide air inlet and outlet can make the air flow quickly, so as to achieve the purpose of rapid heating. The adjustable temperature of 48°F to 98°F is convenient for you to choose according to your needs and room temperature. In addition, you can set the running time to any value between 0 and 24 hours. In this way, at a certain time, our heater will automatically turn off. In order to reduce potential safety hazards, we designed a triple safety guarantee for this heater. Our heaters are designed with full consideration of function, safety and beauty to bring you a perfect shopping experience.



Feature

48°F to 98°F adjustable temperature for you to choice

0 to 24 hours timer function to reduce energy waste

Remote control or touch screen control for simple operation

750W/1500W heating power to meet different needs

Tip-over & overheat protection prevent accident

Child lock ensures safety and prevents them from being injured

Anti-scalding grill prevents users from being accidentally scalded

Touch screen clearly displays the temperature and room temperature

Detachable supporting feet ensure that the heater stands firmly

Can be used to heat the room or dry clothes

UL certified plug ensures high quality and safety



Specification

Color: Black

Material: Stainless Iron + Aluminum

Product Dimension: 40”x 3.5” x 7.5” (L x W x H)

Product Weight: 6.5 lbs

Operation Mode: Remote Control/Touch

Heating Range: 48°F to 98°F

Timing Function: 0-24 Hours

Heating Power: 750W/1500W

Protection: Dumping/Overheating/Child Lock

Certification: UL

Package includes: 1 x Baseboard Heater, 1 x Remote Control, 1 x Instruction

• 🌟【Remote Control & Touch Screen Control】We have equipped this convention heater with a wireless remote control, which is convenient for you to control or adjust from a distance. In addition, the built-in touch screen is not only easy to operate, but also clearly displays the temperature and room temperature for you to adjust as needed.
• 🌟【Fast Heating & 2 Heating Power】Our baseboard hardwire electric zone heaters are available in 750W and 1500W, so you can adjust them according to your needs. The wide air inlet and outlet can make the air flow quickly, so as to achieve the purpose of rapid heating.
• 🌟【Adjustable Temperature & Timing Function】The temperature can be adjusted freely between 48°F and 98°F to suit different sizes of rooms or heating needs. In addition, the 0 to 24 hour timer function can make the machine automatically shut down when it works to the pre-set time, which greatly reduces the waste of energy.
• 🌟【Silent & Simple Operation】Our heater provides warm air with lower noise and will not disturb your sweet sleep. And it will not reduce the humidity in the room, so you will not feel dry. In addition, you only need to install two supporting feet to quickly get a complete heater, which is very simple and easy.
• 🌟【Triple Protection】In order to reduce potential safety risks, we have set up a triple safety guarantee for this heater. The heater will automatically stop heating when it is dumped. And the overheat protection design also greatly reduces the possibility of fire. In addition, the child lock can effectively prevent the baby from changing the settings unintentionally.

User questions & answers

Question:	Is there a cord? If so, how long is it? What side of the unit is the cord located
Answer:	looking at the heater in the pict shown on Amazon on the right side where the digital display and on/off switch is the cord, the cord is about 5ft long
Question:	do you just plug this unit in to any 120v outlet
Answer:	yes I just got mine 2 days ago, plug it in. There is an on/off switch on the side turn it on then you can use the buttons on the remote and heater itself. Only used it 2 days so far and it does what its supposed to plus you have the convenience of having a remote to change settings
Question:	Does this shut off and on again when desired temperature is reached (thermostat
Answer:	Schematic shows a thermostatic control.
Question:	Should you hear a fan on
Answer:	No, schematic does not show a fan, Heat is distributed by convection. Hot air rising through the unit.

Product description

The easy-to-install Honeywell Home manual electric baseboard thermostat works on 4-wire (double pole) electric heat applications (baseboard or line volt) and allows for simple, worry-free operation. It has a simple dial-type mechanical control and is UL- and csa listed for safety.

• Mechanical operation, non-programmable thermostat
• Bi-Metal Temperature Sensor
• 120 - 240 volt, 4 wire. Easy to install and use.Compatible with baseboards. Can control up to 5,280 Watts.
• Positive off
• Easy to install

User questions & answers

Question:	How accurate is it? I would be using it for a convection electric heater
Answer:	Yes, the temporary bypass enables temperature override without changing programming.
Question:	What is the size? 9 X 7 X 4 appears to be very large
Answer:	Probably not. This is for a resistive load and the pump motor is an inductive load. I would check with Honeywell to be sure.
Question:	How is this supposed to mount? It's described as if it is a replacement for a thermostat. That's not my situation
Answer:	2 main differences that I see:#1 the wattage is different. for the th106, you have 2000/4000 Watts for (120/240 volts) and the th104 only has 1750/3500 watts. it's not a big deal unless you have requirements on how many or how big of heaters you are controlling. For me, I have 1 medium and 2 small baseboards which totals to 2000 watts on 120 volts.#2 the programming is different. on the th106 you can specify temps for each day of the week-differently, whereas the 104's programming allows for weekend/weekday modes.
Question:	Is this a double pole thermostat
Answer:	This unit is wired directly to your 220v 2-wire circuit for the thermostat. This is a line voltage thermostat.

Product features

Honeywell Manual 4 Wire Premium Baseboard/Line Volt Thermostat(YCT410B1000/U)

The Honeywell YCT410B1000 Manual 4 Wire Premium Baseboard/Line Volt Thermostat is a simple to install thermostat that's compatible with 120, 240 and 227 vac baseboard systems.

This thermostat's versatility is increased substantially with its implementation of a 2 or 4 wire non polarized connection.

Temperature control is further boosted with a dual diaphragm that actively senses. The YCT410B1000's versatility is only matched by its strength to hold up to an impressive 5,2800W.

About Honeywell

Honeywell's roots reach to 1885, when an inventor named Albert Butz patented the furnace regulator and alarm. He formed the Butz Thermo-Electric Regulator Co., Minneapolis, in April, 1886, and soon invented a device he called the "damper flapper” – an ingenious predecessor to the modern thermostat.

Product description

For maximum, steady heat with a gentle and comfortable effect, the Fahrenheat PLF Liquid Filled Electric Hydronic Baseboard Heater is the solution. This hard-wired UL-listed unit uses liquid-element technology, which makes it cool to the touch. This feature makes it an excellent choice to use just about anywhere, since it’s safe for kids and pets. The large element reservoir maximizes volume of heat storage fluid for prolonged comfort while maintaining individual room temperature, so you’re only heating the rooms you want. The linear high-temperature safety cutout automatically shuts off the unit if the air is blocked, and the tip-over switch prevents it from operating if it’s knocked over. The sleek, contemporary design seamlessly blends into most room aesthetics. Thanks to the high-impact Lexan ends and steel body, this heater resists dents, scratches, and rust. Fahrenheat is part of the Marley Engineered Products family, which provides a wide range of innovative, quality engineered, commercial, industrial, and residential electric comfort heaters and ventilation solutions. All our products are engineered with aesthetics, functionality, safety, and structural tolerance in mind. Prevent the insertion of foreign objects and other airflow blockages with this hydronic baseboard heater; its welded bar grille offers maximum airflow without allowing entry points for tampering. Wire up and connect this baseboard heater quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp; you can connect it to power from either side or even chain multiple units together. Hard-wired unit; 46 in. length; 240-Volt, 1000-Watt, 4.1 Amp; field-installed thermostat.

• USE ANYWHERE DESIGN: This heating unit provides gentle heat with maximum efficiency. Its hydronic design and safety grille means it stays cool to touch while providing unobstructed radiant heat, making it safe to use around small children and pets.
• OPTIMAL HEAT: The low-profile design makes it perfect for home use in bedrooms, basements, bathrooms, and living rooms, and perfect for commercial use in waiting rooms, day cares, offices, and more.
• EASY TO INSTALL: This unit can mount directly to any wall, and flat on the floor to wood, tile, and even carpet; the trim and low operating temperature allows for carpeting to be installed around it.
• SAFE AND EFFICIENT: This energy-efficient design reduces unnecessary on/off cycles, and the overheat protection feature prevents the heater from running when its air intake is blocked, reducing risk of fire.
• QUIET AND EFFECTIVE: The convection heater operates without the annoying popping and pinging noise that many other models give off. The fan-less operation keeps dust, allergens, and dander from circulating through the room.

User questions & answers

Question:	Multiple packs prices are incorrect: 1pk- $166.00, 2pk- $644.00, 3pk-$996.00, 4pk- $1,328.00, 5pk- $260.82. can I buy the 5pk for
Answer:	We're all customers like you. Best if you talk directly to the manufacturer or Amazon for pricing questions.
Question:	do these need to be installed by an electrician? or do they just plug in
Answer:	Electrician. In all loving kindness, if you don't understand that this is a 220-240 volt appliance and not the 110-120 volt appliance, then you wouldn't have the expertise to install this yourself. 110-120 volt circuits are what you normally plug your toaster, computer, TV, hair dryer, etc. into, that is, your standard wall plug. 220-240 volt plugs use heavy duty wires and plugs and are used for clothes dryers and kitchen stove/range/ovens. Usually water heaters and baseboard heaters are "hard-wired", that is, bypassing any plug-in and being permanently wired into the 220-240 circuit. You must also have a 220-240 volt circuit breaker in your electrical service box and a 220-240 volt circuit wired to the room you wish to have your heater installed - unless you are replacing a previous 220-240 volt heater. Putting in that type of circuit, stringing the wire from your service box to the room, would be a major task and expense, and require a permit from the local building authority as well as a certified electrician to do the work.
Question:	how long is this heater
Answer:	the heater is 116.cm, 46 inches or real close to 4 feet long
Question:	Is this a left or right wire
Answer:	Left wire install was seamless. I can't remember if it had a right side option.
Question:	Can i wire 2 or 3 of them together an what size breaker
Answer:	I have 3 of them hooked together. An 8', 4' and 2' one. They are on a 20 amp breaker. Always check with an electrician.
Question:	Does this require a single pole or double pole t-stat
Answer:	Double pole 20 AMP breaker and buy a thermostat individually that mounts to either end or wall thermostat?
Question:	Anyone aware of the energy efficiency of this heater
Answer:	This is just a standard 1000W baseboard heater there is no efficiency about it. You need a thermostat To control this unit either a wall or unit mount. And the heater will run until it reaches the temp you want.
Question:	getting this for a 4 season porch. I need a separate thermostat. Will this work with the Nest thermostat
Answer:	No, Nest thermostats don’t operate at “line” voltage(220volts). They operate at much lower voltage and cannot control resistance baseboard type heaters. I’ve been looking for such a smart “line” voltage thermostat and so far haven’t been able to find one.