10 best wood burning furnace for heating
A wood-burning furnace is a heating appliance that uses wood as its primary fuel source to produce heat for a home or building. Here's what you should know about wood-burning furnaces:
Heating Method: Wood-burning furnaces generate heat through the combustion of wood logs or wood pellets. They typically consist of a firebox where the wood is burned, a combustion chamber, and a heat exchanger that transfers the heat to the air or water used to heat the space.
Efficiency: Wood-burning furnaces can vary in terms of efficiency, with some models designed to maximize heat output while minimizing fuel consumption. Higher-efficiency furnaces often feature advanced combustion technologies and insulation to retain heat.
Heat Distribution: Wood-burning furnaces can distribute heat in various ways:
- Forced Air: Many wood furnaces use a blower to distribute hot air through a system of ducts, delivering warm air to different rooms in the house.
- Hydronic Systems: Some wood furnaces are integrated with hydronic heating systems, which heat water that is then circulated through radiators or in-floor heating pipes.
- Combination Systems: There are also combination furnaces that can burn both wood and other fuels like oil or gas, providing versatility in heating options.
EPA Certification: In some regions, wood-burning appliances, including furnaces, need to meet certain environmental standards and obtain EPA (Environmental Protection Agency) certification. EPA-certified wood furnaces are designed to burn wood more efficiently, with reduced emissions, helping to minimize their environmental impact.
Installation: Proper installation is essential for the safe and effective operation of a wood-burning furnace.It typically involves setting up the furnace in a well-ventilated area, connecting it to the home's heating distribution system, and ensuring compliance with local building codes and safety regulations.
Fuel Source: Wood is the primary fuel source for these furnaces, and it's important to use seasoned firewood with low moisture content for efficient and clean combustion. Some models are compatible with wood pellets, which are a more convenient and efficient fuel option.
Maintenance: Regular maintenance is crucial to keep a wood-burning furnace operating efficiently and safely. This includes cleaning the chimney, inspecting the flue, and ensuring that the furnace's components are in good working condition.
Safety: Safety precautions are essential when operating a wood-burning furnace. This includes proper storage of firewood, ensuring adequate ventilation in the area where the furnace is located, and using appropriate safety equipment and procedures when loading and igniting the wood.
Cost and Efficiency: The cost of operating a wood-burning furnace can be influenced by factors such as the type of wood used, the furnace's efficiency, and the local cost of fuel. While wood can be a cost-effective heating source in some areas, it requires effort in terms of sourcing and handling the fuel.
Wood-burning furnaces can be an effective and sustainable heating option for homes, especially in areas with abundant access to firewood. However, their use requires careful consideration of safety, efficiency, and maintenance to ensure optimal performance and environmental responsibility.
Below you can find our editor's choice of the best wood burning furnace for heating on the market
HY-C MH-6R Magic Heat Bottom Crimp Heat Reclaimer for Use with Wood Burning Appliances, UL Listed, Fits 6" Single Wall Chimney Pipe
HY-C
Product description
Magic Heat is the only UL listed heat reclaimer on the market. Magic Heat reclaims up to 30% of lost heat form your heating appliance and distributes it into your home using only .31 amp of power, roughly equivalent to a 40 watt lightbulb. Magic Heat is designed for heating appliances with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees. The bottom crimp design makes this unit ideal for wood burning heating applications by containing any creosote within the chimney. A toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or a pre-set thermostat automatically turns the blower fan on when the Magic Heat casing reaches 150 degrees and off at 120 degrees. Magic Heat is easy to install and must be installed between 12 and 24 inches from the appliance flue outlet using single wall connector pipe. How it works: As hot flue gases travel from your heating appliance upward through the flu, they heat the transfer tubes in the inner case. Fresh room air enters thru the back vents and is heated while traveling through the transfer tubes. The 225 CFM fan pushes out the warmed air through the tubes and into your home reclaiming up to 30,000 British Thermal Units (BTU) of lost heat. Flue gases are not restricted and continue up your chimney. Magic Heat is available in 6", 7" and 8" pipe diameters for wood, oil/coal or natural gas burning heating appliances. Manufactured in the USA.
- Only UL listed heat reclaimer on the market. Reclaims up to 30% of otherwise lost heat going up your chimney and distributes it into your home.
- Crimp down configuration is designed for use with wood burning heating applications with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees.
- Easy to install. Fits 6" flue diameter. Built in soot scraper cleans tubes internally allowing for maximum heat transfer.
- Plugs into any standard 110V household outlet. Removable back allows for easy maintenance. Designed for use with single wall connector pipe.
- Toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or thermostat control mode. Made in the USA. One Year Limited Warranty.
User questions & answers
| Question: | Can you use stove if the power goes out |
| Answer: | It's meant to be programmed to a garage door. Doesn't interfere with any other programmed opener. Easy directions. I programmed mine to daughters 2 car garage, different codes for each door...do 1 at a time per directions. |
| Question: | Can I mount unit closer than 12” to top of wood stove |
| Answer: | Multibutton transmitter (remote control). Compatible with all Overhead Door CodeDodger (abbreviation: CD. CD/A or CD/B) and Genie Intellicode garage door openers. |
| Question: | Does this work best with non-catalytic stoves |
| Answer: | Yes, purchased a new OCDTR-3 remote a couple months ago for my Overhead Door OCG550 Python which was installed in 1998. Please note that as mentioned on-line by others, only the far right hand button on the remote operates the door but that's good enough for me! |
| Question: | Do you ever have to take the unit off to clean? Or is that middle knob that pulls in & out, does the cleaning for you |
| Answer: | If it is an Overhead Model door and has a programmable button on the back of the motor it should work. I can't guarantee it 100% but it should work. |
Product features
How It Works
As hot flue gases travel from your heating appliance upward through the flue, they heat the transfer tubes in the inner case. Fresh air enters through the back vents and is heated while traveling through the transfer tubes. The 225 CFM fan pushes out the warmed air through the tubes and into your home reclaiming up to 30,000 BTU of lost heat. Flue gases are not restricted and flow up your chimney.
Use Magic Heat to Save Lost Heat!
- Magic Heat’s ten heat transfer tubes maximize the surface area required to effectively exchange heat. The built in soot scraper cleans tubes internally allowing for maximum heat transfer.
- Magic Heat is the only UL-listed heat reclaimer on the market because it does not reduce the flue diameter. The open inner casing design allows hot flue gases to travel upward without restriction.
- Easy to service with removable back. There’s no need to dismantle the Magic Heat in order to service or clean it.
Magic Heat - Improving Your Life and The Life of Your Home
The only UL Listed heat reclaimer on the market - Magic Heat will reclaim up to 30% of lost heat from your stove, and distribute it into your home. Maximize your heat transfer and turn cold into comfort with Magic Heat.
Designed for use with all types of heating equipment with inside flue temperatures exceeding 350 degrees, skin temperatures of 280 degree measured below the Magic Heat.
Available in 6", 7" and 8" pipe diameters. Manufactured in the USA.
Why HY-C?
HY-C people are passionate and committed to high performance. We are here to provide safety, security and sustainable living products to improve your life and the life of your home.
HY-C has been protecting homes and families since 1947 with home improvement products including chimney covers, stove boards, firewood management solutions, nuisance wildlife control screens, and cast iron fireplace accessories. Recent additions to the lineup include the LintEater and SootEater dryer vent and chimney cleaning products. The Magic Heat heat reclaimer and Flame Genie pellet fire pit also have recently joined the HY-C family.
Because we manufacture almost all of our products here in the United States, our customers are not waiting for containers that are ‘on the water.’ We provide what you need when you need it.
Medium Pellet Basket, Heating Source Using Wood Pellets in Your Wood Stove or Fireplace
Burnwoodpellet
- Dimensions are 12" Wide x 8" Deep x 9.5" High
- Basket weighs 12 lbs. and holds 12 lbs. of wood pellets
- 1/4" thick, non-perforated
- Heavy Duty All Welded
- 7 Day Return Policy. Customer responsible for all shipping charges.
User questions & answers
| Question: | When you buy wood pellets by the ton are they in bags or are they loose |
| Answer: | Almost all SN+ 5w20 and 5w30 oils are now blends. Valvoline is simply updating their containers. There was plenty of group III stock in there even when it was called a conventional. |
| Question: | How do you get it to burn hot |
| Answer: | No |
| Question: | How long will a full basket burn |
| Answer: | YES. |
| Question: | I have a regular wood stove. Is it safe to burn pellets |
| Answer: | I don't know about this specific model--mine is a 400C. However, I can tell you what to look for on yours: you should find an access door that opens up below the 'fire box'--this is about 4-5 inches in height. You'll need enough room to place the fan assembly, a source of 110V electricity, and a place to locate the sensor which is magnetized and will 'stick' on the underside of the firebox. |
Large Pellet Basket, Heating Source Using Wood Pellets in Your Wood Stove or Fireplace
Product description
A pellet basket is a metal basket that sits inside a woodstove and burns wood pellets; eliminating the need for electric and natural gas. Pellet baskets are a lower - cost alternative to pellet stoves. Simply place the basket in your wood stove, fill it with wood pellets, light the pellets with gel firestarter. Add more pellets, when needed. Scoop the hot pellets to one side with a metal scoop, add new pellets next to the hot pellets. The hot pellets will ignite the new pellets. Always adjust your flue for a safe working temperature. Any questions concerning sizing, please contact us before ordering.
- Dimensions are 17" Wide X 8" Deep X 9.5" High
- Basket weights 16 lbs and holds 16 lbs of wood pellets
- 1/4 inch thick, non - perforated
- Heavy Duty All Welded
- 7 Day Return Policy. Customer responsible for all shipping charges.
User questions & answers
| Question: | Most peiiet bags are 40 lbs. how many times will a 40 lbs. bag fill the basket |
| Answer: | I do 3 to 3.5 fill ups per bag, I have a thermometer on my stove, once it drops down to say just below 200 I refill, it catches and refires usually within the hour. It does require a bit more babysitting then the firewood but its much cleaner and simple to clean up with an ash vac. |
| Question: | If I had a stainless steel basket with enough spacing, do you think it would do as a test |
| Answer: | I'm not sure about your question either. I only used it one time and it was so bulky and hard to maneuver. I couldn't fill it with pellets without taking all afternoon. I ended up getting a stainless steel sheet (food grade) with air holes, 12"X24" that I'd lay flat over the ash pan and wood great. I needed to remain mindful for several reasons: 1. Pellets burn hotter than wood and they burn different so make sure you try small pellet fires at first until you get the hang of them. 2. EXPLOSIONS - This scared me a number of times. I could avoid explosions if I put pellets on the front side of the stove one time and the back side the next. If there was any size portion of pellets burning or red hot (with or without the flame) I learned to put the pellets next too and not on top. If I put 'new' pellets on hot ones they'd smolder and then there would be an explosion some of with were loud and dangerous. The basket looked great on paper and didn't work in my stove. |
| Question: | do you lite the pellets on top or on the bottom |
| Answer: | You can use gel fire starter by placing on top of pellets. We use a layer of pellets...3 pieces of FatWood in a teepee fashion...surrounded by more pellets. We don't like the gel. |
| Question: | How often does it need to refilled |
| Answer: | I would fill it every four hours or so. The main need was to keep the box cleaned out. Over all I was pleased with it. |
Junda Portable Camping Stove Mini Tent Heating Stove for Outdoor Backpacking Hiking Traveling BBQ
Junda
Product description
Product Features:
100% brand new and high quality
Ordinary burning flame is changed into radial heat energy.
Widely use in combination of heating
Adopting high-temperature resistant stainless steel, endurable and firm.
Suitable for all kind of stoves.
Product Specifications:
Material:stainless steel
Size(approx.):Diameter 11.5 cm * height 14.5 cm/4.53 * 5.71in
Quantity: 1 pc
Package includes:
1 * Tent Heating Stove
- 100% brand new and high quality. Adopting high-temperature resistant stainless steel, endurable and firm.
- Ordinary burning flame is changed into radial heat energy. Widely use in combination of heating
- Say goodbye to heavy, costly, polluting petrol fuels. It’s not safe for long transportation. Lightweight, easy and convenient to carry with you.
- Mother Nature presents the best fuel catalogue, with the abundance of twigs, leaves, grasses, wood or other biomass as perfect kindling. You can usually find it everywhere for free. No matter whether you are camping, backpacking, travelling,etc.
- Also can work with solidified alcohol tablets or other solid fuel, so you could carry a couple of those if you want to, just in case that the weather might be rainy so you could have a hard time looking for dry enough wood.
User questions & answers
| Question: | Do these come with storage bags |
| Answer: | You're joking right. Seriously! |
| Question: | Would this heat a tent |
| Answer: | Since it’s just a metal shell, the heat source used would determine how much heat it disperses, but I would say no, it would not heat your tent. |
| Question: | Pictures appear to show item positioned 2 different ways, which way is correct |
| Answer: | I USE MINE AS A HEATER, ON TOP OF MY TRANGEA BURNER IT GETS VERY HOT ON TOP. THE BLACK PART. IT WAS OVER 500 FH. I WAS USING ETHANOL AS FUEL. WWW.regalflame.com Its on amazon also. |
| Question: | Is the $30.74 price for just one heater or for two heaters? The pictures with this item are misleading |
| Answer: | It's just for one heater...don't waste your money. The product is no good. |
| Question: | Will this base work with the powermatic pm1000 table saw? the owner's manual states the base of this saw is 24" x |
| Answer: | It adjust up to 28 x 28. I have had no problem with mine. Have one on my band saw and one on my table saw. Super convenient with needing rearrange for space. |
| Question: | Will this work with powermatic pm1000 table saw |
| Answer: | Check the dimensions on your saw and see if they match up with the JMB base. I CAN tell you this, I've used this base on several different Powermatic tools and love them. The bases go together in five minutes without any tools and they're strong, stable and well made. They hold the tool in place beautifully and when you want to move the tool... it's effortless. You can get the dimensions for your saw on the P/M website. Look on Jet's for the base. Both should be easy to find. Good luck and if they fit... you won't find a better mobile base. (no affiliation with either company, just have my own wood shop) |
| Question: | Do all 4 wheels lock |
| Answer: | Yes. The back wheels locking hold the primary breaks. The front wheels, because they are swivel casters, locking not really holding the wheels not moving. |
| Question: | Will this base hold and fit the Jet 708674PK XACTA Saw Deluxw cabinet saw? I am asking about dimensions and not the weight capacity |
| Answer: | The base will Adjust from 18-by-18-to-28-by-28-inches and is a recommended item with the Jet 708674PK XACTA Saw Deluxw. |
Product features
JET Universal Mobile Base
The Mobile Base adds a new dimension of flexibility to your JET and Powermatic machines. Equipment previously considered immovable can easily be moved by only one person - rearrange your shop for special projects in just minutes. With two fixed and two swivel casters, the adjustable width and length let you configure the base to the tool for total support and portability.
CAFRAMO UltrAir, 810CAKBX Classic Styled, Heat Powered Wood Stove Fan, 125 CFM, Nickel, Mid-Sized, 7.9" Blade
36 months - 10 years
Product description
If you own a free-standing wood stove you need an Ecofan! This unique accessory is designed to sit on top of your wood stove and circulate warm air through the room quickly and efficiently. By creating its own electricity from the heat of your stove, Ecofans do not need household energy or batteries. And unlike noisy built-in blowers, the economical Ecofan is whisper quiet. THE ECOFAN ULTRAIR is the intermediate model in the Ecofan family, moving up to 125 cubic foot of air per minute (CFM). It is the midsize model at 9” tall x 5.5” wide x 3” long and comes with your choice of gold, nickel or black blade colour. The UltrAir operates at a stove surface temperature range of 212°F – 650°F (100°C – 345°C).
- Warm your room up to 31% faster with the mid-sized Ecofan model, the Ecofan UltrAir
- Ideal for rooms up to 240 square feet, the UltrAir circulates more warm air further into your room!
- Tested and proven to save you up to 14% in fuel with more efficient distribution of heat from your wood stove
- No electricity needed, Ecofans generate power by converting the heat from your wood stove into electricity
- Designed and manufactured in Canada for over 20 years, Ecofans have been tested in the harshest winters and come with a 2 year limited warranty
- 125 CFM
User questions & answers
| Question: | Does this fan distribute the hot air from the ceiling? That is mainly what I need because I do not have a ceiling fan |
| Answer: | No. This fan is made to sit on the woodstove/insert and blow hot air from the source into the room. It works amazingly for that! You should look at small fans made to hang from top of doorways. I don't know what they're called, but we have one in each doorway of the living room to distribute the hot air to the rest of the house. Wait, let me look (duh!)... "Minuteman Circulating Fans", about 5 x 5 x 2.5 inches. They work great; we use them year round! |
| Question: | How tall is the little handle at the top of the medium sized fan, and does it slide down into the fan as it does on other similar fans on the market |
| Answer: | height is a little over an inch . It doesn’t slide down, however it does fold over if clearance is an issue. |
| Question: | Would this unit be recommended for a pot belly wood/coal burning stove w/ a 14" dia top |
| Answer: | If the 14"top you've mentioned is a flat surface, then the answer would be yes. The footprint of the fan is less then 6" so that would be enough for this fan to sit on. |
| Question: | Why is this fan $100 compared to some being |
| Answer: | Made in Canada, not China, higher CFM (airflow), 125. Patent Protected. Higher quality parts and labor. Made and designed by the original manufacturers of Ecofans for 25 years. |
Product features
Warm Faster
The genuine Ecofan, heat-powered stove fan is designed to sit on top of a free-standing stove and circulate warm air further into your home increasing your comfort up to 38% faster.
Burn Less
Ecofans have been tested and proven to reduce fuel usage and lessen your environmental footprint by up to 18% with more efficient distribution of heat from your wood stove.
No Electricity Needed
No Electricity needed! Ecofans generate their own power by converting the heat from your wood stove into electricity.
Experience Ecofan
Ecofans are self-regulating, as the stove heats up, the Ecofan runs faster, circulating more air, further into your room. As the stove cools, the fan slows down and shuts off. And unlike noisy built-in blowers the Ecofan is whisper quiet.
Ecofans also act as a great indicator that your fire needs to be stoked. When the fan starts to slow down, you automatically know that it is time to load the fire with more wood!
Trust the Experts!
Ecofans were invented in Canada over 20 years ago! Tested in the harshest Canadian winters, Ecofans continue to be designed and manufactured in Canada.
Designed for your lifestyle.
Everyone’s home and stove are different. One-size-fits-all doesn’t always fit. That’s why we created a family of products that address any room size, or budget.
Committed to happy customers.
Ecofans are manufactured with the highest quality parts, and backed by a 2-year warranty. Located in Ontario, Canada our customer service representatives are world class and available to answer any questions you may have.
US Stove 80230 Blower Motor
Product description
US Stove has been bringing warmth to homes across the nation for 140-year. US Stove has a wide range of Automatic Circulators, Plate Steel Heaters, Cast Iron Heaters, Pellet/Multi-Fuel Heaters and Gas Fireplaces from which to choose. The large selection of stoves and accessories will ensure warmth of your home with safe, quality products.cfm550.Product Motor Size : 2.6 Amps
- US Stove Company has been keeping America warm since 1869
- Non sealed bearings with lube tubes
- Genuine USSC parts for easy do-it-yourself repair on your stove
- Similar part to model 80594P
- Blower motor for models: 1300, 1400, 1500, 1537, 1557M, 22AF, 6100, 6220
User questions & answers
| Question: | Does this blower come with the gasket |
| Answer: | No it does not. It’ was about $20 to get one with shipping! A little pricey! |
| Question: | What is the motor horse power rareing |
| Answer: | I believe less than a quarter HP. Ordered it for my husband, so not absolutely sure without going and looking at it. |
| Question: | If I order this will it have the "Non sealed bearings with lube tubes" as stated in the description |
| Answer: | Our blower did not have oil tubes as stated on description. Very frustrating! |
| Question: | I'am just looking for the motor for my Hotblast wood burning furnace Model |
| Answer: | We bought it for our Hotblast wood burner, but our model number is 1557. |
US Stove UFB908 Universal Filter Box
US Stove Company
Product description
US Stove UFB908 Universal Filter Box is designed to be installed on any USSC add on furnace. Specifically, it covers the blowers and allows for easy connection to the existing HVAC return duct work or to newly installed ducting. It comes with an integrated slot for a 16-inch by 20-inch air filter. Made of durable galvanized steel, the UFB908 will provide years of trouble-free service. US Stove has been bringing warmth to homes across the nation for 140 years. US Stove has a wide range of Automatic Circulators, Plate Steel Heaters, Cast Iron Heaters, Pellet/Multi-Fuel Heaters and Gas Fireplaces from which to choose. The large selection of stoves and accessories will ensure warmth of your home with safe, quality products.
- Features easy light igniter system
- Fits models: 1300, 1400, 1537G, 1557M, 1602, 1602M, 1802, 24A, 24AF, 30A
- Holds any standard 16-Inch by 20-Inch by 1-Inch air filter
- Durable galvanized steel
- Genuine USSC parts
User questions & answers
| Question: | What size is the cold air intake for duct work |
| Answer: | I do not know the answer, if the hole is too big you can add sheet metal to make it smaller. if you really need to know I can measure it for you. [email protected] |
| Question: | Will this filter box work on a Harman sf 3500 a furnace |
| Answer: | This is designed for US Stove and Ashley furnaces. we cannot answer if it will fit a Harman. |
| Question: | Does the filter slide into a track? Or do you have to tape the filter on |
| Answer: | There is a slot for the filter. |
| Question: | Does this fit all models of hot blast furnaces .??? I have an older one I think it's a |
| Answer: | I have same one, it fits perfectly! |
The Forever Cap CCFS9 9-Inch Stainless Steel Liner Top Chimney Cap
: The Forever Cap › See more product details
Home-Complete Stove Fan- Heat Powered Fan for Wood Burning Stoves or Fireplaces-Quiet and Low Maintenance, Disperses Warm Air Through House
Home-Complete
Product description
No Need to Sit So Close to the Fire Anymore! If you own a fireplace or wood burning stove and you would like to get MORE HEAT throughout your house but you DO NOT want to spend more money on electricity - all you have to do is get one of these amazing heat powered fireplace stove fans, and you will be warm and toasty for FREE! That is because this fan does not use ANY electricity. Just set it in the right place, and the heat from your fireplace or stove will turn the fans and blow HOT AIR exactly where you want it! If you have a large room or large house to heat, you already know that a FAN is the best thing for getting the heat to be dispersed throughout your living space. It does not even require maintenance – except for occasional dusting! Plus, the fan acts as an indicator that your fire needs to be stoked. When the spinning starts to slow down, you automatically know that it is time to stoke the fire with more wood! No assembly required. Lasts forever. Makes a great winter housewarming gift!
10 YEARS LIMITED MANUFACTURE WARRANTY
- SAVE MONEY ON ELECTRICITY! No electricity required. Works off the HEAT produced by your fireplace or wood-burning stove. The hotter the fire, the faster the blades turn. Therefore, more warm air gets dispersed throughout your house!
- WHISPER-QUIET! 170-190 CFM Above 900 RPM and MAX Temperature of 644 F (340 C) The only moving part is the blade assembly. Say good-bye to the loud noise of electric forced-air fans! You won’t even know this fan is there – but you’ll FEEL the WARMTH!
- MAINTENANCE-FREE! Just dust it off occasionally, and put some light oil on the blade shaft to keep it spinning smoothly and quietly!
- “BUILT-IN” FIRE-STOKING INDICATOR! Because this fan operates on HEAT, you’ll automatically know it’s time to stoke the fire when the fan slows down! The higher the heat, the faster the blades spin. So when they’re slowing down and you’re not feeling the heat as much as before, it simply is telling you to stoke the fire! What could be easier?
- SAFETY PLACEMENT OF FAN - Fan should be placed on the back of the stove (not in front) 6 inches away from the stove pipe
- material type: Metal
User questions & answers
| Question: | I have a small Woodburning FP. It faces NW. Can I mount at exhaust vent to push hot air up chimney , to stop blow backs |
| Answer: | My didn't come with a damper. That's something you'll probably have to add on your own. Although the company that makes the stove also sells dampers as accessories. |
| Question: | where is it made |
| Answer: | I don't see why not. But it's very heavy and should be covered when not in use. The cast iron will rust eventually if it gets wet. |
| Question: | what is the max temp for the fan |
| Answer: | no fire bricks, have to screw on legs and exhaust outlet. blocked bottom air inlet with aluminum foil, front air inlet is best, drilled some holes in ceramic board baffle at inside top of burn chamber for bettet exhaust flow to outlet. |
| Question: | what temp do it start turning |
| Answer: | It is a log wood stove not a pellet stove |
Fireplace AWP130 Self Stick Adhesive Gasket Wood Pellet Stove Window Glass Door Black Tape
Product description
flat tape for wood stove window glass
- AWP130 Self Stick Adhesive Gasket Wood Pellet Stove Window Glass Door Black Tape#0014/20
User questions & answers
| Question: | How long do you have to wait, before you can use the stove again |
| Answer: | if your existing rope is 3/8" , then it will work. There are several different size rope gaskets made, it should list the size for your stove in the owners manual. |
| Question: | what is the width of the gasket |
| Answer: | Hi- The thickness is whatever the package says it is. Usual thicjnesses ae 5/16", 3/8". 7/16", 1/2"...whatever the package says. The gasket may look toioi thick but it will compress depending on how you use it. |
| Question: | I need the window gasket for the Lopi Answer wood heater |
| Answer: | I don't know! What is the diameter of the current door glass? You have to replace it with the same size gasket. It should be in the manual that came with the stove??? You can also go online and google Lopi 380 door glass gasket and something should turn up. Good luck! |
| Question: | What is the heat rating on the adhesive |
| Answer: | Well Jenna, Hard to say, the difference between the Most gap & Least gap is the question. The gasket does compress some, so it will compress in the smaller area, but will it then be thick enough to seal the larger area? If you installed it & get a door imprint all the way around that would show success. They do make a 1/2 inch diameter which may make more difference in these clearances. Note up front: the glue is tricky to work with & hardens quickly, I suggest having some toss away pressing/placing type tools (like Chopsticks) before you start, to position, hold & sometimes stretch the rope keeping in mind: the most space will be removed when the rope is NOT stretched but pushed closer together on itself & least when the rope is stretched. Test: Take some clay or bubble gum and place a wad in the largest opening & the smallest opening, then check the difference, if the Difference is Less than 3/8 you should be ok, if it's more you may experience some leakage which may Not be a big problem keeping in mind that you must allow air to enter the stove to burn, you may negate the air leaking by with the closing of the air vents, however if there's too much air flow you may Not be able to control the fire, be careful there, to test this: after installing the gasket get a fire going well & with the air supply vents closed completely close the door and see if the fire dies down, if so you should be good if not you probably won't be able to control a larger fire. |
