13 best installing a pellet stoves

Product description

US Stove Wiseway pellet stove takes away the need for electricity by utilizing a natural gravity feed system that eliminates all mechanical parts, meaning less maintenance and fewer breakdowns. This patented revolutionary design is the only epa-certified and UL-listed nonelectric pellet stove on the market today. The Wiseman is easy to start and operate. Simply heat the burn chamber and flue and start the pellet flow with a propane Torch. This stove uses a natural draft that will take over and Ramp the stove up to temperature. Adjustments are simple by opening and closing fresh air intakes on the front of the stove. The window allows you to see the flame traveling up the body of the stove. Since it uses no electricity, heat is radiated off the 3-1/2 inch tubing and the steel baffles on the back. This stove offers extremely small clearances on the rear and sides, making it easy to install. Since it does not use any electricity, this stove is the perfect source of heat for areas that are prone to blackouts or for off-the-grid installations.

• EPA-certified nonelectric pellet stove utilizes a Natural gravity feed system, for less maintenance
• 40,000 BTUs heats up to 2,000 sq. Ft
• Uses standard 3-inch pellet venting
• 60-Pound Hopper lasts for up to 30 hours
• Silent operation and Modern Style
• Material Type: Steel

User questions & answers

Question:	how do i find the 2* bafflel board for a ashley
Answer:	it is between burn pit and ash tray ok that it john
Question:	The images shown don't have the ussc symbol on the unit. please confirm that this is a united states stove company product and not a replica
Answer:	Mine has a USSC symbol. It is a large metal piece at the base of the stove. Kind of difficult to distinguish but it is there.
Question:	Is it possible to use this stove with an existing 8” class A chimney? Or do I need to get an insert to drop the size down to
Answer:	This is only meant to be used with 3-4 inch pellet pipe or with 6 inch Class A stove pipe.
Question:	Could this be bricked in to retain more heat
Answer:	I actually dud put fire bricks on the unit to try to retain heat, the result was, this unit, unlike a rocket stove; is trimmed down a bit to heat up ro about 800-900 degrees at the most and my feeling was that the fire bricks. While effective, also seemed to kind of rob the stove of it's heat at the same time, and since the unit runs on the draft it creates with it's own heat, it tended to mess with the draft a little bit. However, I did not use soapstone, which I'm feeling would be the perfect add-on to one of these stove.

Product features

Wiseway Pellet Stove

The GW1949 Wiseway from US Stove eliminates the need for electricity by utilizing a natural gravity feed system that eliminates all mechanical parts meaning less maintenance and break downs. The Wiseway is simple to start and operate. Simply heat the burn chamber and flue and start the pellet flow with a propane torch. This stove uses a natural draft that will take over and ramp the stove up to temperature. Adjustments are simple by opening and closing the fresh air intakes on the front of the stove. The window allows you to see the flame traveling up the body of the stove. Since it uses no electricity, heat is radiated off the 3 1/2" tubing and the steel baffles on the back. This stove offers extremely small clearances on the rear and sides making it easy to install.

Product Features

The GW1949 Wiseway is a non-electric pellet stove. In addition, it can be used in mobile homes. You get a safe, clean burning pellet stove that saves money on both heating and electric costs.

Easy to read Thermometer

The Wiseway can easily heat up to 2,000 square feet of living space – more than the space in the average home – and does it by putting out over 40,000 BTU’s.

Easy to use

Adjustments are simple by opening and closing fresh air intakes on the front of the stove.

Glass viewing window

The viewing window allows you to see the flame traveling up the body of this stylish and modern stove.

About US Stove Company

For over 150 years, US Stove Company has been empowering the spirit of freedom with heating appliances that keep Americans warm and self-reliant. As America’s hearths transformed from nation-building necessity to proud symbol of independence, we’ve remained obsessed with inventing and building the heating appliances that make it possible.

As we look forward to our next 150 years, that’s one thing that won’t change. US Stove Company will continue to perfect biomass heating so that it has a clean, safe, renewable role in the energy-secure future we all want. Because we know what keeps America’s home fires burning.

Product description

ENGLANDER PELLET STOVE AUGER MOTOR Fits Models: ~ 25-PDV ~ 25-PDVC ~ 25-PI ~ 25-PAF ~ 25-PDVP ~ 55-SHP10 ~ 55-SHP10L ~ 55-SHP20 ~ 55-TRP10 ~ 55-SHP22 ~ 55-SHP22L ~ 55-TRP15 ~ 55-TRP22 ~ SHP25 ~ 55-TRP25 ~ American Heritage ~ American Standard ~ US 25-5670 *NOTE: Correct replacement for the upper and lower auger/drive motors in the above mentioned models. Part Numbers: ~ PU-047040 / B4415UI / PH-CCW1 Specs: Specs: ~ 1 RPM, COUNTER CLOCKWISE Rotation (When Facing Shaft) ~ 120 V, 60 HZ, 1.03 Amps ~ 3/8” Diameter x 1” Length Shaft – Flat Edge of Shaft for Securing with Set Collar ~ Wire leads measure 12” in length. We include both male and female spade connectors depending on your stoves configuration. ~ Gearbox Measures 2 ¾” Wide x 4 5/8” High x 1” Width (Width to screw mount hole 1 5/16”) Total width including magnet, armature and gearbox measures 2 1/8”. ~ Highest Durability and Lowest Operating Decibels – Exceeds all OEM & aftermarket motor standards ~ Exclusive 1 Year warranty with our no hassle replacement guarantee ~ Made in China – Top Tier Manufacturer. Earth Sense has invested extensive testing and time to insure the quality of this replacement motor is equal to or better than the OEM motor. *NOTE: This motor runs cooler than the original and does not have or require the rear plastic cooling fan. This motor has wire leads for electrical connection instead of leads directly on the motor. Connection wires will plug in directly into wire leads; doesn’t matter which wire connects to which lead. We guarantee 100% correct fit and function.

• England Stove Works Auger Motor - Correct Replacement for Top and Bottom motor
• 1RPM 110 V, 60 HZ, 1.03 Amps
• Improved Easy Install with 12" Wire Leads!
• Full 1 Year Warranty
• Free Fast Shipping - Guaranteed Best Price

User questions & answers

Question:	Will this fit an Ashley 5500xl
Answer:	no
Question:	Will this work in a king pellet stove 5500M
Answer:	My stove is an England but from what I found while searching for my part was that they are pretty universal. I'd be sure to research the return policy before you buy it in case you find it won't fit properly. Good luck.
Question:	will this work for a breckwell p23 stove
Answer:	Thanks for contacting us. Depending on the age/date of manufacturer of your P23 and serial number we can determine the correct auger motor. Some will use a 1 RPM Clockwise motor with a hole in the shaft, others will use a 4 RPM clockwise with a hole in the shaft. If you want to let us know your stoves manufacturer date and serial number we can direct you to the correct replacement auger motor for your unit. Happy to assist. Sincerely, Taylor-ESESstoves
Question:	Is there a way to reverse direction to clockwise
Answer:	Yes there is. Remove the two screws holding the magnet to the gear box (sometimes there are 4) and flip it over. Replace the mounting screws and you are now running in the opposite direction.

Product description

HARMAN Convection / Distribution Blower Assembly Fits Models: ~ XXV (25th Anniversary Model)- ALL YEARS ~ Accentra Fresstanding - ALL YEARS and P35i Part Numbers: ~ 1-00-29145 / 3-21-29045

• Aftermarket Harman Convection Blower - Premium
• Fits Harman Pellet Models: ~ Accentra Cast Freestanding ~ P35I ~ XXV ~ XXV-TC
• Part # 1-00-29145 / 3-21-29045
• Includes Blower, Wires, Ends and Instructions for Installation
• 90 day Manufacture Warranty

User questions & answers

Question:	Is this an official Harman Accentra part or is this an aftermarket part
Answer:	Hi, if it doesn’t say OEM in description then it is a aftermarket. I paid close to 300.00 for my OEM part. Hope this answers your question.
Question:	My stove is making a horrible sound, its not the exhaust fan motor. Is this the same thing you guys experienced
Answer:	Shannon, Happy to assist and get to the root of the issue. Have you been able to pin point where the noise is coming from? Your distribution fan here won't kick on until the stove get's warm enough unless you turn your feed adjuster to test mode; Is the noise something you hear right away on start-up or is it something you hear right when the distribution fan kicks on? We have a wealth of experience with Harman and we are confident we can help you figure out where the problem is. Thanks, Taylor-ESESstoves
Question:	Is this an official Harman Accentra part or is this an aftermarket part
Answer:	I was told by my Harman tech this was an OEM aftermarket product
Question:	Is this an oem replacement part or an aftermarket part? also, is there any wire connections required or is it "plug & play"? thanks
Answer:	This is a replacement part-very good price after checking other places. I am not sure about the connections as I paid a stove company to install if for me and they charged $75.00.

Product description

This Fresh Air Intake Kit from the PelletVent Pro series is a Type L Biofuel Chimney Pipe component and consists of the duralock system for a tight seal. Allows fresh air into an existing pellet stove installation that had been using inside air. Allows an installer to decide the best possible location for the air intake vent, not the same location as the wall thimble. The 2" diameter, 18" length flex hose expands to approximately 60". Includes: faceplate with screen, moisture barrier, aluminum flex, and two clamps. Features: Type: Air Intake Kit. Material: Aluminum. Collection: PelletVent Pro. Type L Biofuel Chimney Pipe Component. Designed for use with 3" Pellet Vent Appliances.

• Diameter: 2"
• Clearances: 1 clearance to combustibles in the USA for appliances using wood pellets or oil. 1 clearance
• Listings: c-UL-us Listed to UL 641 (MH8381 and MH14420). ULC Listed to ULC S609, ULC/ORD C441 (CMH1439
• Kit includes: faceplate with screen, moisture barrier, aluminum flex, and two clamps.
• Package Quantity: 1

User questions & answers

Question:	Is this Compatible with englander wood stove
Answer:	Yes this is the proper termination for double walled pipe for pellet stove.
Question:	PB105 manufacturer says need 3" pipe for fresh air. Is this a 3" pipe
Answer:	It is a double walled 3" pipe with a twist lock end. The type typically used with a pellet stove. I believe the packaging read type "PL"
Question:	I'll ask again because the Questions below do not clearly say.....is there an interior plate or cover
Answer:	If you would like the correct answer call Duravent.
Question:	Does this have some type of dressing for the inside wall
Answer:	I believe so why not

Product description

Technical Specifications: Blower Wheel Diameter: 3.80" Blower Wheel Width: 1.66" Blower Motor Type: Shaded Pole Blower Thermal Protection: Yes Blower Conduit Box: No CFM: 95 Hz: 60 Phase: 1 Full Load Amps: 1.05 RPM: 3000 Bearing Type: Ball Motor Enclosure: Shell Motor Insulation: Class B Lead Length: 6.0" Max Ambient Temp: 40C Inlet Diameter: 3.20" Outlet Height: 2.37" Outlet Width: 2.33" Overall Height: 6.70" Overal Depth: 6.20" Wheel Type: Centrifugal Mounting Position: All Housing Material: Steel Agency Compliance: UL / CSA

User questions & answers

Question:	what are the dimesions
Answer:	It should say?
Question:	Will it fit for an old Englander from
Answer:	I can't say for sure but I had to modify two of them slightly for use on my '91' model. I had to bend one edge 90 degrees for mounting, I just stuck it in a vise to get the initial bend and adjusted it further with a Crescent wrench. So yes, depending on the differences are. I've had Whitfields and the majority of fans are somewhat universal, with minor adjustments needed to the wiring termination or mounting flange.
Question:	Will this fit a 2014 25pdvc eglander stove
Answer:	Yes. That's the model I have and it fits. Be aware the wires are too short to fit the control board. I had to splice in some extra length.
Question:	Will this fit a englander 25 pdvc
Answer:	I have the same model and it fit just fine. The only issue I had was the wires that come on this motor are too short to reach the control board. I had to splice in some extra length from the old motor before I scrapped it.

Product description

How would you feel if you knew this was the last time you had to do this chore? As a pellet stove repair technician I’ve replaced hundreds of auger motors in more than 10 years and I can promise you this is the best auger motor you can put in your stove. It’s quieter than any other motor you can buy and lasts longer. 15-20 Year Lifespan. starts off by packaging the motor in a high strength metal casing for durability. Then they add a powerful copper wound transformer to drive the motor. Inside there are the highest quality components. The gear sets and bearings are manufactured with tolerances so small they can only be measured using a microscope. This motor is calibrated for high stress, high temperature operation so it stays cooler and last longer while effectively breaking through pellet fuel pile ups. Wiring - Your new motor may have a electrical plug that is different from you old motor. Cut the new plug off and splice the wires to the old wiring using your choice of electrical connector. It doesn't matter which wire goes to which as long as they are connected.

• FREE Tech Support. Use amazon messager to contact Seller.
• RPM: 1, Voltage: 115 VAC 60 Hz
• Motor Protection: Thermally Protected Bearings: Oilless
• Termination: 2 wire with AMP terminal
• Warranty: 1 Year

User questions & answers

Question:	Is this multi speed? my stove has 9 speed settings, appears that this is just 1 rpm straight up
Answer:	What type of stove? Depends on wether you start and stop the first feed motor The second one runs continuously at one rpm
Question:	Does this motor rotate clockwise, most i see are ccw but i need cw
Answer:	This turns ccw.
Question:	Does this Auger motor rotate in a clockwise rotation ?? when mounted
Answer:	This motor is reversible, so can go either way.
Question:	is this part for the bottom auger
Answer:	Two auger systems generally use two identical, but verify motor model numbers to be sure

Product description

From across the room or across the country, your Sensi Wi-Fi thermostat makes it easy to remotely control and schedule your home comfort - Anytime. Anywhere. Designed to work with the wires you already have, Sensi thermostat does not require a common wire (c-wire) for most installations, so it is compatible with the HVAC equipment in many homes in U.S. Canada. A c-wire is required for heat-only, cool-only and heat pump (without aux) systems, and for use with Apple HomeKit. Check to make sure it will work for you at sensi.emerson.com/compatibility . The intuitive app walks you through each step of installation with custom configured instructions, removing all the frustration and guesswork from the installation process, so you can be up and running in no time, no experience required. Put your comfort on your terms using location-based temperature control with geofencing or creating custom heating and cooling schedules with the flexible 7-day scheduling option with the ENERGY STAR certified Sensi thermostat. Both energy saving features you save about 23% on your HVAC energy usage so you can save money without compromising your comfort. Plus, Sensi integrates directly with Amazon Alexa, Apple HomeKit, Google Assistant and Wink home automation platforms. Connect to Amazon Alexa to control your home temperature with simple voice commands, or just ask Siri to set, raise or lower your home temperature when using Sensi with Apple HomeKit. Whats more, Sensi Wi-Fi Thermostat has been named the Best Value smart thermostat of 2018 by USA Todays Reviewed.com Energy savings calculated by comparing operation time for a nationwide sample of Sensi users with temperature adjustments averaging 4 degreeF vs. users with no adjustments. Savings vary based on equipment type/condition, insulation, climate temperature adjustment size/frequency. Based on survey results of 2120 respondents that purchased and installed a Sensi thermostat in 2018, approximately 70% reported installing in 30 minutes or less. Adding a common wire may impact installation time. Does not work with electric baseboard heat and some other systems. System requirements for mobile app: iOS - 10.0 or above Android - 4.2 or above (5.0 or greater to use the Geofencing feature).

• EDITORS CHOICE BEST VALUE SMART THERMOSTAT by USA Today’s Reviewed.com
• SAVE ABOUT 23% ON HVAC ENERGY*: The ENERGY STAR certified Sensi thermostat helps you save on your HVAC energy costs, with features like geofencing, 7-day flexible scheduling, remote access and in-app system usage.
• MOST INSTALL IN 30 MINUTES OR LESS**: Use the built-in level and step-by-step app instructions for a quick installation. Skip any extra work painting or patching the wall thanks to the standard thermostat size.
• SMART HOME COMPATIBLE: Works with Amazon Alexa, Google Assistant, Apple HomeKit (c-wire required), and Samsung SmartThings smart home platforms.
• USAGE REPORTS: Monitor current day and historical heating, cooling and fan runtimes right in the app.
• CONTROL FROM ANYWHERE: Remotely control your home comfort from your smartphone or tablet using the Sensi mobile app for Android and iOS devices.
• SMART ALERTS: Sensi features smart alerts to help detect extreme temperature and humidity levels in your home.
• CIRCULATING FAN: Air circulation may improve indoor air quality by helping to regulate temperature and prevent buildup of particles and mold.

User questions & answers

Question:	Can you program just the fan mode
Answer:	Hi there, this unit REQUIRES an internet connection, based on a WiFi (wireless) connection. Once the device establishes an internet connection to the Honeywell cloud (which is cool!) you can effectively control the thermoostat from anywhere you have an internet connection.... even your smartphone. Enjoy!
Question:	Is it smart enough to decide whether to run the heater or cooler to keep the temperature fixed
Answer:	The WiFi setup requires you to create an account on mytotalconnectcomfort.com. It’s not that hard. The biggest problem with this thermostat is the unreliable remote connectivity ever since Honeywell spun off their thermostat division 6 months ago. Now it’s frequent periods of time where the thermostat will not respond to remote commands. It’s maddening
Question:	What if i have a C wire
Answer:	When you put it on circulate, the fan comes on for about 10 minutes every 20 minutes or so. The owners manual says it runs about 35% of the time. I used this feature this Fall with the system off (no heat or a/c) just to circulate the air through my Filtrete filters.
Question:	Can you create a fan schedule? I’d like the fan to always run from 10pm until 6am
Answer:	These thermostats are not the same. Even the screen is different. The RTH9580 doesn't have the 3D look of the 9300 series.

Product description

The PelletVent Pro Fresh Air Intake Kit allows fresh air into an existing pellet stove installation that had been using inside air. The kit allows an installer to decide the best possible location for the air intake vent, not the same location as the wall thimble. The 2" diameter, 56" length flex hose expands to approximately 130". Kit includes: faceplate with screen, moisture barrier, 2" diameter aluminum flex, and two clamps. PelletVent Pro is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It is also built to vent corn and other biofuel products (Rated for continuous use flue temperatures up to 570 degrees F).

• Thimble Dimensions: 5'' W x 5'' H x 3/4'' D
• Flex Pipe Dimensions: 2'' dia. x 56'' long (expands to approx. 130" long)
• Clearances: 1" clearance to combustibles in the USA for appliances using wood pellets or oil. 1" clearance to combustibles in Canada for oil-burning (type L vent) appliances. 3" clearance to combustibles in Canada for wood pellet-burning appliances
• Listings: c-UL-us Listed to UL 641 (MH8381 and MH14420). ULC Listed to ULC S609, ULC/ORD C441 (CMH1439 and CMH1440)
• Kit includes: faceplate with screen, moisture barrier, aluminum flex, and two clamps

User questions & answers

Question:	How long is this
Answer:	15 ft I think
Question:	Will this work on a ussc 5500m
Answer:	Yes it will. Just installed same item last week on the same stove

Product description

US Stove (USSC) King & Ashley Igniter Element. Fits Models: 5520, 6041, 5500M, 5500XLT, 5510, 5600, 5700, Part Numbers: 80607 / 80619 / 80481 / AMP-CI4. Specs: 250 Watts, 120V AC. Igniter shaft measures 4" length from where the wires start to the tip. Top of the Line, Highest Quality, Longest Life Expectancy - Exceeds all OEM & aftermarket standards. Exclusive 1 Year warranty with our no hassle replacement guarantee. Free Shipping No Minimum required! **100% Best Price Guarantee **100% Satisfaction Guarantee **100% On-Time Shipping Commitment **Returns accepted within 60 days on products not used or installed.

• US Stove (USSC) King & Ashley Igniter Element
• Correct replacement for 80607 / 80619 / 80481 / AMP-CI4
• 250 Watts, 120V AC, 3/8" Dia, 4" Total Length
• Full 1 Year Warranty starting from Date of purchase - no hassel
• Free Priority Shipping - No Minimum from ESESStoves

• Highest Quality Replacement Igniter
• Replacement for part # #3-20-677200
• 1 Year Warranty

User questions & answers

Question:	Will this fit a Harmon Acceentra 2 and will it fit the original cradle it goes in
Answer:	Hi, I have an Accentra pellet stove insert, bought new in 2007. I don't know when they started making the Accentra 2, but my stove had the older igniter with 13 fins and the new one with 15 fins fit in with no problems. You have to bend a metal tab to open the cradle once you remove it with the 2 screws, and the old part slips out and the new one slips right in.
Question:	My current igniter has 13 fins and the tray only has a gap of 2.5” for all the fins to fit. Is this new 15 fin less than 2.5”? Thanks
Answer:	No problem at all. Can be adapted. Universal as long as the dimensions match(igniter Size：3/8" Dia. x 3 1/4" Length)
Question:	I bought mt harman accentra pellet stove in 2002. will this part be a correct replacement? allen
Answer:	Hi, Yes this igniter will work in all Harman stoves and inserts that are computer operated. the thirty nine dollar igniter will not fit the cradle. The cradle would have to be filed to accommodate the igniter. I suggest the original equipment model.
Question:	will the ignitor fit a harman xxv stove
Answer:	yes.. it will fit these models: For Harman® Models: P-35I P-38+ P-43 P-61A P-68 Advance Accentra FS Accentra Insert XXV HF-60 Boiler PF-100 Furnace (Earlier models that use this style) PB-105 Boiler (Earlier models that use this style) By SweetHome store SELLER on December 8, 2016

Product description

Cross reference: 4515u1-063, Whitfield quest, 93-0194, 12046300, ecm-6, v07524acd9, traditions & profile series stoves, Avalon, austroflamm Bracewell, merkle-korff, national steel crafters, Lennox hearth 6216, earth stove, envirofire, lopi, pellet master r7-rgm451, v08038aa09, 6216, car003, 6807, v0752acd9. 1 year manufacture warranty. If you need ccw rotation: You would remove the 3 or 4 screws that hold the motor to the gear box. 2 of the screws go thru the bearing housing, you remove those leaving the shaft/rotor in place. Turn the motor coil around and reassemble. This is an aftermarket replacement motor. Below are the instructions for properly reversing the direction of the motor. Reversing rotation to counter clockwise facing the shaft: A.) Hold auger motor in your hand with motor side facing you. B.) Remove 2 silver screws holding the bearing cap. C.) Remove bearing cap. D.) Remove the silver bolt(s) holding the black magnet in place. (There may be one or two depending on production) e.) Remove black magnet, flip it over, and place back onto motor. (Do not flip the shaft, only the black magnet) f.) Reinstall silver bolt(s) on magnet. G.) Reinstall bearing cap. Reinstall last two silver screws.

• Shaft: 3/8" x 1" with flat side, no hole in shaft
• Rotation: Clockwise when facing shaft
• Torque: 100 inch pounds, rated for continuous duty
• Motor is reversible mechanically, instructions on box label
• Motor dimension: 2.75" x 4 5/8", 6 bolt holes: 8-32

User questions & answers

Question:	i have a 4515u1-083 - ,48 amps. 115v. -.60-hz zp, will this work
Answer:	no will only work for stir pot auger needs to be 4rpm to feed pellets
Question:	I see only two wires, which I assume are hot and neutral. Does it require a ground connection to the chassis
Answer:	No ground on the original it's not needed since it is connected to other connections that are grounded.
Question:	Will this replace a merkle- korff 3709ui
Answer:	That number crosses oveer to our Rotom part # HM-RGM452, 2RPM auger motor.Regards,CSH Inc
Question:	ihave whitfield pellet stove, the auger stopped working ..the model is 734 . will the motor work
Answer:	If your motor is 1 rpm it should work fine, you can change the rotation of the motor if it turns the wrong way. not familiar with a model 734 is that the stove model or the auger motor? You can also disconnect the auger motor use a old extention cord with two 1/4 spade terminals and hook it up plug it into 110 and see if it turns. If it doesn't it s probably not the auger motor. Check so see if pellets are jammed in auger.

Product description

The 85 CFM Combustion Exhaust Blower fits most England's Stove Works pellet stoves and provides forced air (negative draft) that keeps the flame burning, while allowing you to set your heat range to your desired comfort level. A complete assembly with gasket and pipe adaptor included

• Exhaust blower
• Durable construction for long-lasting and reliable use
• Built-in leads connect to existing wires on the stove for "plug and play" and easy installation
• Complete assembly with gasket included
• Includes detailed step-by-step installation instructions or you may reference the DVD that was included with your unit

User questions & answers

Question:	will the pu-076002b fit the pelpro cci modelhcpp2bd
Answer:	It depends on the style of exhaust blower that your stove has, but if it's a KS-5020-1040, this will fit with little modification and work awesome. If your worried, home Depot carries this as well at about the same price, and it will be easier to return if it won't work. I'm going to give this a shot on my flat top pelpro stove so I can have the removable hub for easier cleaning.
Question:	hi i would like to verify that this conbustion motor part will fit on my england stove model 25 pdvp. ser#002910. mfg date 9/97. thank you
Answer:	yes, it will fit that stove.
Question:	I am retrofitting a homemade pellet stove. What is the diameter of the housing outlet
Answer:	3.00" Standard
Question:	The ad says it is a complete assembly . Does it come with the fan blade
Answer:	Yes. It comes with the fan blade and gaskets.

Product description

flat tape for wood stove window glass

• AWP130 Self Stick Adhesive Gasket Wood Pellet Stove Window Glass Door Black Tape#0014/20

User questions & answers

Question:	How long do you have to wait, before you can use the stove again
Answer:	if your existing rope is 3/8" , then it will work. There are several different size rope gaskets made, it should list the size for your stove in the owners manual.
Question:	what is the width of the gasket
Answer:	Hi- The thickness is whatever the package says it is. Usual thicjnesses ae 5/16", 3/8". 7/16", 1/2"...whatever the package says. The gasket may look toioi thick but it will compress depending on how you use it.
Question:	I need the window gasket for the Lopi Answer wood heater
Answer:	I don't know! What is the diameter of the current door glass? You have to replace it with the same size gasket. It should be in the manual that came with the stove??? You can also go online and google Lopi 380 door glass gasket and something should turn up. Good luck!
Question:	What is the heat rating on the adhesive
Answer:	Well Jenna, Hard to say, the difference between the Most gap & Least gap is the question. The gasket does compress some, so it will compress in the smaller area, but will it then be thick enough to seal the larger area? If you installed it & get a door imprint all the way around that would show success. They do make a 1/2 inch diameter which may make more difference in these clearances. Note up front: the glue is tricky to work with & hardens quickly, I suggest having some toss away pressing/placing type tools (like Chopsticks) before you start, to position, hold & sometimes stretch the rope keeping in mind: the most space will be removed when the rope is NOT stretched but pushed closer together on itself & least when the rope is stretched. Test: Take some clay or bubble gum and place a wad in the largest opening & the smallest opening, then check the difference, if the Difference is Less than 3/8 you should be ok, if it's more you may experience some leakage which may Not be a big problem keeping in mind that you must allow air to enter the stove to burn, you may negate the air leaking by with the closing of the air vents, however if there's too much air flow you may Not be able to control the fire, be careful there, to test this: after installing the gasket get a fire going well & with the air supply vents closed completely close the door and see if the fire dies down, if so you should be good if not you probably won't be able to control a larger fire.