13 best wood stove inserts

Product description

The AW1820E from Ashley Hearth Products is an airtight fireplace insert that will greatly improve the efficiency of your fireplace. The AW1820E fireplace insert meets the stringent requirements of the EPA "Step 2" 2020 Certification Guidelines. With a heavy cast iron door and a cool touch wood handle along with an air washed ceramic glass that allows a magnificent view of the burning fire, it will be a beautiful addition to your existing hearth. It includes a hearth surround to fully enclose the existing fireplace and is equipped with a spring-loaded automatic adjustment making installation a breeze. The Ashley AW1820E model replaces the previous Vogelzang model TR004 Colonial fireplace insert and the US Stove Company model 2200IE insert.

• 69,000 BTUs heats up to 1,800 Sq. Ft
• Cast iron feed door with large 16.5" x 9" ceramic glass window and heavy gauge 3/16" reinforced plate steel with firebrick lining
• Accepts logs up to 18 inches in length
• Over 75% efficient heating
• Replaces Vogelzang model TR004 and the US Stove Company 2200IE fireplace insert

User questions & answers

Question:	Can this be used with a zero clearance prefab fireplace
Answer:	For the most part, yes. But it really depends on the size of the firebox and flu
Question:	How about publishing the installation instructions so we can figure out if we have the skills to perform the installation
Answer:	Installation is not too hard. My husband who is a handyman type was able to install ours.
Question:	On the dimensions what is considered a height
Answer:	Not including the surround pieces, the base of the burner box to the top of the box.
Question:	Does this have a blower
Answer:	Yes

• 👉 Hongso Replacement Fireplace Blower Fan KIT for Heat N Glow GFK-160A; Regency Wood Stove Insert 846515; Royal GFK-160; Jakel; Rotom # R7-RB168 (2016 model)
• 👉 Dual Blower Fans with Center Mounted Ball Bearings Motor; Right-angled Stand, the direction of the wind can be adjusted with 90 degrees; 3-prong Power Cord, universal connecting wires, rheostat & thermostat, installation instructions. 👉It is not pre wired, easy to install with the installation instructions and wiring diagram
• 👉 Universal fit blower kit; High Quality, Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting
• 👉 Total Length = 12 7/8" Bracket Height=4 5/8" Width = 4 1/4"; Motor RPM: 3000 ; Airflow in C.F.M: 160 ; Volts: 120 ; Frequency (hertz): 60; 1.0A；Certifications: Motor UL Approved
• 👉 NOTE: The "Fits" BRAND and MODEL # Listed in the Product description are Reference ONLY! Make sure you measure the size of your original blowers and compare with the replacements BEFORE you order. 👉If you have any other questions, please feel free to contact us, we will reply within 24 hours

User questions & answers

Question:	Will this fit a Jotul c450? Thank you
Answer:	Sorry, I don't know. I suggest you contact the seller.
Question:	How close can the wires coming off the motor be to the firebox above
Answer:	I did mine up so they wouldnt touch the fire box and have them hanging up/away
Question:	Will this fit heat n glo SL
Answer:	It works well in a SL-750 not sure about a SL-5
Question:	Does this fit a Regency F3100L
Answer:	Yes. You will likely need to disconnect the combustion air duct and reconnect after installing the blower kit.

Product features

Heavy Duty Copper Motor. UL Listed.

Energy Efficient and Long Lasting

High Quality Sealed Ball Bearings

Powerful and Superbly Balanced

Runs Quietly

Noise Level: 75 dB (MAX)

Dual Blower Unit

Airflow in C.F.M: 160

100% Improvement in Heat Output

Variable Speed

Allows You to Control the Speed of the Blower

Magnetic Thermostat Switch

Strong Magnet. No Screws and Nuts Needed

Closes (turn on) at approx. 120°F and opens (shut off) at approx. 90°F (+/- 5°F tolerance)

Product description

42,000 btu- Auto Ignition-Programmable Thermostat-Powerful blower,Bay Design large view window- Carbon Black, EPA certified, 47 lbs hopper capacity. 110 Volt, heats up to 2,000 sq ft, 1 year warranty, parts available. No Shipping to Alaska, Hawaii or Puerto Rico.

• 42,000 btu- Heats 1700-2000 sq ft
• 47 lbs hopper Capacity/Ash Pan
• High efficiency/110 Volt/Programmable Heat Settings/Auto Ignition
• Large View Area-Bay Design-Easy Install
• 1 Year Warranty - Parts Available

User questions & answers

Question:	what are the dimenson of part that goes in chimney
Answer:	Just love that name that you have for the Amazon user. It is actually 26 by 26 - with 14 inches deep . If you want to you can call us at 919-388-7614 between 9 and 6 eastern time if you have any questions regarding the stove.
Question:	The unit is 15 inches deep. How much extra room is required for the vent and intake pipe to come out the back then curve to go straight up a chimney
Answer:	You will need 5 inches from the back of the box. Total space inside the cavity should be 17 inches. Or more
Question:	Does this stove have removable ash bins or do you have to clean it with a vacuum
Answer:	This unit does not have an ash pan because it is a zero clearance meant to sit flat on the floor. The stove comes with a free vacuum cleaner.
Question:	Will this work with a pre fab fireplace
Answer:	Yes as long as the box is for wood-burning. Not for gas. And must measure a minimum of 30 inches in width 25 inches in height and 18 inches in depth.

Product description

This Drolet Escape 1800i Fireplace Wood Insert upgrades your fireplace to a cleaner burning, higher efficiency heat source. This EPA-certified wood insert generates 75,000 BTU to heat up to 1900 sq. feet. Flue Collar Size in. 6, EPA Certified Yes, BTU Output 75,000, EPA Exempt No, Firebox Size W x D in. 21 1/4 x 16 3/4, Blower CFM 130, Full Load Run Time Hours 7 to 9, Door Opening W x H in. 17 3/4 x 9, Assembly Required Yes, Heating Capability sq. ft. 1,900, Blower Included Yes, Blower Power Supply Volts, Amps 110V, Mobile Home Approved No, Heat Settings Variable, Dimensions W x D x H in. 27 x 26 1/2 x 22, Fuel Type Wood, UL Yes, Max. Log Size Accepted L in. 20, Stove Pipe Included No, Product Type Fireplace insert. High-temperature secondary combustion provides 30 greater efficiency and cleaner emissions Air-washed ceramic glass maintains a clear view Accepts 20in. logs High-quality 130 CFM variable-speed blower with heat activation Firebrick lining protects steel and provides even heat radiation Heavy-duty door latch Minimum fireplace opening required 29in.W x 17in.D x 24in.H Requires optional faceplate kit, Item# 27484 Some assembly required Model Number: DB03125. Size: 29 Inch. Age Group: Adult.

• Optional LARGE FACEPLATE 32'' X 50'' AC03375
• Optional REGULAR FACEPLATE 29'' X 44'' AC03370
• EPA's new standards - 1.54 g/h average particulate emissions rate
• Premium blower included

User questions & answers

Question:	can this insert draft directly into the chimney, without the6" stove pipe
Answer:	Hello. An insert stove should never be installed without a liner that will have a positive connection with the stove and it must rise all the way up the chimney. Thank you.
Question:	What is included with insert and how much does it weigh
Answer:	Hello, This is the stove and the fan. The faceplate showing on the picture is not included. You need to buy an Optional LARGE FACEPLATE 32'' X 50'' part # AC03375 or Optional REGULAR FACEPLATE 29'' X 44'' part# AC03370 Thank you.
Question:	What are the specs for the fan ? speeds? wattage? cfm ? decibels ? (please do not answer if you do not know
Answer:	Hello, The manufacturer does not provide decibels it was not tested. The blower is a DOUBLE CAGE BLOWER 144 CFM 115V - 60Hz - 1.1A It is also equipped with a speed control. Thank you.
Question:	What is the maximum size opening covered by this faceplate kit, Item
Answer:	Hello, there is 2 possible faceplate that you can buy 1: AC03375 LARGE FACEPLATE 32" X 50'' WITH NICKEL TRIM KIT, 2 : AC03370 REGULAR FACEPLATE 29'' X 44'' WITH NICKEL TRIM KIT Hope this helps you.

Product description

Your new stainless chimney liner kit will include: Premium .006 Thick Stainless Steel Flexible Chimney Liner (316). The liner is air and water tight sealed. 7 seams with 10 corrugations between each seam. These liners have the very best flexibility and strength combined on today's market. When they heat up they expand, when they cool down they contract, cutting down and fighting against creosote build up. Note: The size given is the inside diameter. Add 1/4" for the outside diameter of the liner. This kit includes a Vertical Appliance Connector where the liner fits into the female side, utilizing the quick connect band. Use the Appliance Connector when you are connecting vertically to the top of a fireplace insert or appliance. A perfect round fit every time thanks to the smooth weld technology. A 13" x 13" Top Plate with a Quick Connect Collar is also included to secure the chimney liner from the top of the chimney. You can trim it to fit with a pair of snips and it's ready for installation. If you need a larger size or different style, please contact us for details. The Quick Connect Flue Cap with mesh screen will keep animals and debris out of the chimney. Fasten down the quick connect clamp to the collar of the Top Plate and you're done! A sharp looking square chimney cap that installs in a snap. Complete do-it-yourself installation instructions (Installing a chimney liner made easy.) If you're at all handy, do this job yourself and save between $1,200 and $2,500. We will support you before and after the sale. Lifetime Warranty and it is transferable if you should ever sell your house. Note: Please measure the inside of your flue and inspect the flue for offsets or narrowing sections to be sure the flue can accommodate the chimney liner you are purchasing before ordering. Highly recommended to contact one of our Certified Technicians to go over your installation before purchasing. Once the flex liner is uncoiled, we cannot accept a return on it.

• Complete Do It Yourself installation instructions; We will support you before and after the sale
• RockFlex Chimney Liner Warranty; The only warranty that is transferable to the next homeowner
• UL1777 Listed in the USA and ULCS635 in Canada; Flexible liners are only to be installed inside a masonry chimney
• Quick Connect System; Simply tighten the clamps and enjoy your UL listed RockFlex liner
• RockFlex Chimney Liner; Constructed of 316 stainless steel, exceeds all chimney industry standards

User questions & answers

Question:	Hiw do I attach top plate to 8x8 terra cotta that protrudes from the chimney
Answer:	You don’t need a damper, it’s built in to the stove
Question:	I would like to put a damper in the pipe do you sell one that will work for this
Answer:	Hello, This is only to be used inside a masonry chimney to reline the chimney. If you need to extend your chimney through an attic and above the roof, you would need to use Class A chimney pipe (which we do offer). Class A chimney pipe has a 2" clearance to combustibles. Rockford Chimney Supply
Question:	Can this be used from the attic to the roof instead stove pipe
Answer:	Insulating is always recommended as it reduces the amount of creosote buildup in the flue and keeps the flue gases hot. It is not required by code if you have a brick and masonry chimney with clay flue tiles.
Question:	do you need to insulate
Answer:	Same as the old one.

• Hongso Replacement Stove Fireplace Blower Fan KIT for Heat N Glow GFK-160A; Regency Wood Stove Insert 846515; Royal GFK-160; Jakel; Rotom # R7-RB168 (2016 model)
• Includes dual blower fan with center mounted ball bearings motor, 3-prong power cord, universal connecting wire, rheostat & thermostat, installation instructions.
• Universal fit blower kit; High Quality, Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting
• Total Length = 12 7/8" Height=4 1/4" Width = 4 1/4"; Motor RPM: 3000 ; Airflow in C.F.M: 160 ; Volts: 120 ; Frequency (hertz): 60; 1.0A
• NOTE: The "Fits" BRAND and MODEL # Listed are Reference ONLY! Make sure you measure the size of your original blowers and compare with the replacements BEFORE you order, if you have any other questions, please feel free to contact us, we will reply within 24 hours

User questions & answers

Question:	i see there is a 3000 rpm , mine has a 2 speed switch is this item compatible
Answer:	I am having the same problem because of the extra wire coming from blower
Question:	Where can I get a wiring diagram for this unit. I have more connectors than connection points
Answer:	I assume so, we used it to replace one with ball bearings (that we had repacked a couple times) and didn't disassemble before installing.
Question:	Do these motors use ball bearings
Answer:	Not sure, I bought several and did not have good results. I wound up throwing one out of the box away and had to replace another one for a customer.
Question:	What's the manufacture warranty on this item
Answer:	Yes, you need rheostat to control speed, any speed you want

Product features

Hongso Replacement Stove Fireplace Blower Fan

• Length = 12 7/8"; Height = 4 1/4"; Width = 4 1/4"
• Motor RPM: 3000; Airflow in C.F.M: 160
• Volts: 120; Frequency (hertz): 60; 1.0A

NOTE: The Black Blower Housing Can be Rotated 90 Degrees.

Heavy Duty Copper Motor. UL Listed.

Energy Efficient and Long Lasting

High Quality Sealed Ball Bearings

Powerful and Superbly Balanced

Runs Quietly

Noise Level: 75 dB (MAX)

Dual Blower Unit

Airflow in C.F.M: 160

100% Improvement in Heat Output

Variable Speed

Allows You to Control the Speed of the Blower

Magnetic Thermostat Switch

Strong Magnet. No Screws and Nuts Needed

Closes (turn on) at approx. 120°F and opens (shut off) at approx. 90°F (+/- 5°F tolerance)

• LARGE ENOUGH FOR YOUR FIRE PLACE OR FIRE PIT: Ten life sized ceramic gas logs that won’t leave your fireplace looking bare. Logs range from 15 inches to 10 inches in size.
• GREAT FOR MOST TYPES OF FIREPLACES, INCLUDING: Vented gas fireplace, Outdoor gas fireplaces, indoor gas fireplaces, direct vent, zero clearance, natural gas, gel, standard fire pits, fake fireplaces, electric fireplace inserts, propane fireplaces, etc.
• KEEP YOUR FAMILY SAFE FROM ANY TOXIC FUMES: Natural Glo logs burn clean and do not release any ash or residue into the air like some lower quality fake fireplace logs.
• EXTREMELY REALISTIC: These ceramic wood logs look just like real wood logs when they’re in the fire. You’ll even see some orange/red hot spots under the logs while burning.
• 100% Satisfaction Guaranteed! Natural Glo is dedicated to address any product/service issues and is committed to delivering a 5 star experience for all buyers

User questions & answers

Question:	Are these logs safe to use with Mertik Maxitrol fireplace
Answer:	You can use this logs with any fireplace band/combination, they're safe, i have one gotten a defective one, which was making noise sure to the heat of the fire, i quickly removed, other than that you can use them forgot any fireplace application
Question:	Do they ever expire
Answer:	I had this product for two months only, but it worked very well so far. Also no ashes come out.
Question:	They could be placed directly in flame? do they turn red in flame
Answer:	They should be placed at least 1.5 inches (4cm) above the gas orafices. When they get very hot, you should notice a low red/orange glow at the bottom.
Question:	When put into a flame, do they put off smoke
Answer:	No, they do not put off smoke. However, if you place them too close to the gas flame orafices they will cause incomplete combustion in your fireplace and therefore soot. Hope this helps :)

Product features

Use Inside or Out

Whether you want to spruce up your outdoor fire pit or your indoor fireplace, these are the logs for you. 



Our ceramic fiber logs are versatile. They go great in an old school fire pit, a modern fire table with lava rock or glass, or an indoor gas fireplace. 



Before switching anything - Gas logs included - with any indoor fireplace, PLEASE BE SURE TO CHECK WITH A LOCAL EXPERT. There are 100's, if not 1000's of variations of fireplaces and fire codes across the USA and it is very important that you proceed with caution when it comes to lighting a fire in your home.

Individual Logs Give You Individual Freedom

Arrange your logs based on your needs. You receive 10 logs with 5 different designs to allow you to use your creativity. Stack the logs in an orderly fashion or mimic nature by placing them at random.



Be sure to leave at least 1.5 inches between the logs and your gas orafices. Blocking these orafices is what causes incomplete gas combustion which can lead to odors, carbon buildup (Which then becomes soot), or other damage.



Also, be sure that your fireplace is clean before using because any unburned organic material will also combust and create particles.

 

Product description

US Stove Wiseway pellet stove takes away the need for electricity by utilizing a natural gravity feed system that eliminates all mechanical parts, meaning less maintenance and fewer breakdowns. This patented revolutionary design is the only epa-certified and UL-listed nonelectric pellet stove on the market today. The Wiseman is easy to start and operate. Simply heat the burn chamber and flue and start the pellet flow with a propane Torch. This stove uses a natural draft that will take over and Ramp the stove up to temperature. Adjustments are simple by opening and closing fresh air intakes on the front of the stove. The window allows you to see the flame traveling up the body of the stove. Since it uses no electricity, heat is radiated off the 3-1/2 inch tubing and the steel baffles on the back. This stove offers extremely small clearances on the rear and sides, making it easy to install. Since it does not use any electricity, this stove is the perfect source of heat for areas that are prone to blackouts or for off-the-grid installations.

• EPA-certified nonelectric pellet stove utilizes a Natural gravity feed system, for less maintenance
• 40,000 BTUs heats up to 2,000 sq. Ft
• Uses standard 3-inch pellet venting
• 60-Pound Hopper lasts for up to 30 hours
• Silent operation and Modern Style
• Material Type: Steel

User questions & answers

Question:	how do i find the 2* bafflel board for a ashley
Answer:	it is between burn pit and ash tray ok that it john
Question:	The images shown don't have the ussc symbol on the unit. please confirm that this is a united states stove company product and not a replica
Answer:	Mine has a USSC symbol. It is a large metal piece at the base of the stove. Kind of difficult to distinguish but it is there.
Question:	Is it possible to use this stove with an existing 8” class A chimney? Or do I need to get an insert to drop the size down to
Answer:	This is only meant to be used with 3-4 inch pellet pipe or with 6 inch Class A stove pipe.
Question:	Could this be bricked in to retain more heat
Answer:	I actually dud put fire bricks on the unit to try to retain heat, the result was, this unit, unlike a rocket stove; is trimmed down a bit to heat up ro about 800-900 degrees at the most and my feeling was that the fire bricks. While effective, also seemed to kind of rob the stove of it's heat at the same time, and since the unit runs on the draft it creates with it's own heat, it tended to mess with the draft a little bit. However, I did not use soapstone, which I'm feeling would be the perfect add-on to one of these stove.

Product features

Wiseway Pellet Stove

The GW1949 Wiseway from US Stove eliminates the need for electricity by utilizing a natural gravity feed system that eliminates all mechanical parts meaning less maintenance and break downs. The Wiseway is simple to start and operate. Simply heat the burn chamber and flue and start the pellet flow with a propane torch. This stove uses a natural draft that will take over and ramp the stove up to temperature. Adjustments are simple by opening and closing the fresh air intakes on the front of the stove. The window allows you to see the flame traveling up the body of the stove. Since it uses no electricity, heat is radiated off the 3 1/2" tubing and the steel baffles on the back. This stove offers extremely small clearances on the rear and sides making it easy to install.

Product Features

The GW1949 Wiseway is a non-electric pellet stove. In addition, it can be used in mobile homes. You get a safe, clean burning pellet stove that saves money on both heating and electric costs.

Easy to read Thermometer

The Wiseway can easily heat up to 2,000 square feet of living space – more than the space in the average home – and does it by putting out over 40,000 BTU’s.

Easy to use

Adjustments are simple by opening and closing fresh air intakes on the front of the stove.

Glass viewing window

The viewing window allows you to see the flame traveling up the body of this stylish and modern stove.

About US Stove Company

For over 150 years, US Stove Company has been empowering the spirit of freedom with heating appliances that keep Americans warm and self-reliant. As America’s hearths transformed from nation-building necessity to proud symbol of independence, we’ve remained obsessed with inventing and building the heating appliances that make it possible.

As we look forward to our next 150 years, that’s one thing that won’t change. US Stove Company will continue to perfect biomass heating so that it has a clean, safe, renewable role in the energy-secure future we all want. Because we know what keeps America’s home fires burning.

Product description

The Vogelzang Deluxe Wood Burning Insert with Vent Kit is a beautiful airtight, plate steel unit featuring a classic cast iron door with stay-cool handle. Its air washed ceramic glass allows a magnificent view of the burning fire. This unit heats 1800 sq. ft. and includes a stainless steel vent kit and and 150 CFM blower. Faceplate included.

• Heats 1800 sq. ft.
• Includes stainless steel vent kit
• Includes 150 CFM blower
• Accepts 18in. logs
• Cannot be installed in mobile homes

User questions & answers

Question:	Does this come with a faceplate? Everything seen in this picture
Answer:	Yes I bought this in 2018 comes with face plate good insert.
Question:	What kind of vent pipe doea it come with
Answer:	A 6” wide Stainless steel flex pipe. The pipe itself is about 20’ long. I had to cut about 6’ of it off after I installed it.
Question:	Anyone bought one of these? Does it blow air to house to heat it
Answer:	Yes has blower and blows heated air, great insert. Shorter logs.

Product description

Wood Stove Maintenance:



✔ Replace worn gaskets yearly on air-tight stoves.

✔ For peak efficiency check woodstove gaskets regularly and replace each season.



Benefits of Midwest Hearth Gaskets:



• Graphite impregnated gasketing is more abrasion resistant and less likely to get stuck with creosote ensuring a better and more consistent air tight seal.

• Black gasket is used by leading stove manufacturers due to better aesthetics and higher performance.

• There is no need to paint graphite impregnated gasketing.



Directions:



• Be sure stove is cold.

• Wear protective gloves and eye protection.

• Protect work area with a drop cloth.

• Use a screwdriver or scraper to remove old gasket and clean door channels down to bare metal.

• Apply a bead of gasket cement in door channel.

• Press new gasket into wet cement and close door to check for airtight fit.

• Trim gasket as needed.

• Clean up all cement spills or excess immediately with wet cloth.

• ABRASION/CRUSH RESISTANT - Graphite impregnation/lubrication makes gasketing more abrasion resistant.
• GRAPHITE IMPREGNATED FIBERGLASS - Less likely to get stuck with creosote ensuring a better and more consistent seal.
• BLACK GASKET - Used by leading stove manufacturers due to better aesthetics and higher performance.
• PROFESSIONAL STRENGTH CEMENT - Withstands 2000-degrees Farenheit. Adheres to all types of stoves from steel to cast iron.
• MADE IN USA - Quality manufactured in the United States.

User questions & answers

Question:	How "flat" or compressed will this rope get if used between a rock fireplace and fireplace glass door unit (on metal)? Part to close gap / seal air fl
Answer:	I can only guess yes. Reasoning; fireplace manufacturers are not electronic circuit designers. They are basically metal fabricators who choose industry designed off the shelf controllers, and valve assemblies. Call a local dealer and do some research
Question:	will this work on my englander pellet stove model 55 – shp
Answer:	No. you need the signature command module for that unit. 80D0018 is on Amazon.
Question:	My old door gasket is 7/8. Can I use a 1 inch size of gasket instead
Answer:	The service parts guide shows this is the module for that unit. 582-833 is an orifice one line down from the module.
Question:	Which 5/16" gasket to use on a jotul door -- the armored rope version or the rope version
Answer:	I don't recognize that part number. There should be a tag on your old control module with lots of info. On that should be the part number: PN: 2166-307 was the module I had, and this one (2166-347) is its latest replacement. Works for me (old one was fried in a power surge).

Product description

STOVE TOP SURFACE THERMOMETER



Installation Instructions:



• This thermometer is calibrated to be used on the outside surface of a metal wood stove.

• Attach to the stove using the magnet on the back side of the thermometer.

• Place thermometer on the top, front, or side surface of the stove.

• Generally you will want to place the thermometer in the location recommended by the stove manufacturer, or the location the stove reaches the hottest temperature.

• Magnet will hold to steel up to 800°F.



Operating Instructions:



• The best operating temperature for most wood stoves is between 400°F and 650°F and is illustrated as the middle zone on your thermometer labelled “BEST ZONE”.

• Temperatures below 400°F can create a dirty, smoky fire that leads to creosote buildup in your chimney. Creosote can be a safety hazard. This temperature range is illustrated on your thermometer and labelled “CREOSOTE”.

• A temperature above 650°F consumes more wood without additional room heat as more energy is lost up the stove pipe. This area is illustrated on your thermometer as “TOO HOT”.

• FOR STOVE TOP SURFACE - Calibrated to read temperature on the surface of your wood stove.
• MAGNETIC ATTACHMENT - Easily attach to your metal wood stove. Magnet will hold to 800°F.
• EASY TO READ ZONES - Optimize efficiency, prevent overheating, minimize creosote.
• PORCELAIN ENAMEL FINISH - Premium quality finish to compliment your beautiful stove.
• FLIP UP HANDLE - Quickly reposition meter to find the sweet spot for temp readings.

User questions & answers

Question:	What is size
Answer:	2-1/2 inches in diameter
Question:	Will this work for a Jotel 500 wood stove
Answer:	The short answer is yes as I have one sitting on on top of my Jotel woodstove. Having said that, it should only be used as a rough (very rough) guideline and not as a precise scientific instrument. Reasons being: - different wood burns at different temperature and produce different amount/level of BTU - different wood has different level of pitch and should be monitored differently - different location on the stove top can have greatly different temperature depending where the burning log is placed - different stove have different chracteristics in heat discipation There is no substitute for observing how your woodstove operates in conjunction with creosote collected on your chimney stack. It's usefulness is its ability to give you a baseline (as far as temperature goes) for future observation and reference in order to find out how to operate your stove in the optimum wy.
Question:	Why is best zone 400f-650f, when most other termometers out there are 300f-600f
Answer:	The best burn temps are a best guess and depend more on the stove manufacturers specific recommendations. However this particular thermometer is flawed. The indicator needle drags and sticks, leading to inaccurate readings.
Question:	Will this work on a stove with a ceramic top
Answer:	i don't see why not. It just measures the surface temperature of the object you put it on.

Product description

US Stove Company FBP6E Firebricks are designed to withstand high temperatures and prolong the life of your wood or coal burning stove. Every wood burning stove with firebrick liners will need to have its bricks replaced on a regular basis to keep the stove performing at optimum efficiency. This 6-pack of 4-1/2 in. x 9 in. x 1-1/2 in. pumice bricks is the perfect package to keep your stove operating perfectly. They can be used in any brand of wood or coal stove that uses this standard sized brick. They are designed to fit most USSC wood stove models.

• Replacement bricks for firebrick liners on stoves
• Dimensions: 4-1/2 inches x 9 inches x 1-1/4 inches
• Not for outdoor firebrick usage
• Genuine USSC replacement part
• For any brand of wood or coal stove that uses this standard-sized brick
• 6 bricks per package

User questions & answers

Question:	are these pumice
Answer:	Used these in a standard wood stove, run at the usual temperatures with a hot burn daily to burn the creosote out of the stovepipe, for about a year. They've held up well. They arrived packaged well in bubble wrap, all bricks intact. For the couple odd sizes needed for the floor pattern, they cut easily with a diamond blade on a circular saw. A carbide hacksaw blade would likely work as well for a brick or two. Laid out result was a nice tight fit. Should work nicely for any wood fired stove application in the firebox, size and thickness of course taken into consideration. If it's in the oven cooking space, can't answer, as the materials and what might go airborne and into the food would be at issue. It seems that would be strictly a manufacturer question.
Question:	Would these work well in a wood fired pizza oven as the floor
Answer:	Yes. The bricks can easily handle the inside of a fire place which reaches temp above 800 degrees. Placing them along the inside walls of a grill would prob hold the heat in better.
Question:	Can this be used in a Grill to hold heat? A grill where food is cooked
Answer:	I used them in a propane forge and they melted in under an hour The maximum temperature of a forge is supposed to be 2400 F.
Question:	are these temp rated at upto
Answer:	Hello, Thank you for your question. You can silicone the top plate to the top of the clay tile. It will overhang or you can trim it if you would like to.

Product features

US Stove FBP6E FireBrick

Every wood burning stove with firebrick liners will need to have its bricks replaced on a regular basis to keep the stove performing at optimum efficiency. This 6 pack of 4-1/2 in. x 9 in. x 1-1/4 in. Pumice bricks is the perfect package to keep your stove operating perfectly. They can be used in any brand of wood or coal stove that uses this standard sized brick.

• Can also be used to replace firebrick in most other brands
• Easy installation; increases efficiency
• Fits most United Stoves Company wood stoves
• Genuine USSC replacement part
• 6-pack

Product description

How Does the Stove Fan Work?



The stove fan works by using the heat from your wood stove to drive the stove fan blades making for a simple and elegant solution to your issues with heating. The stove fan makes use of a Thermoelectric Power Generator.

The heat is moved from a hot area to the cold metal fan blades resulting in an electric current. This energy that is produced powers a rotary motor that spin the blades to move air. The stove fan is very reliable and has no need for any other source of energy.

The base of the stove fan heats up, there’s a motor here, which is powered by the heat that’s created from your stove. So the fan sits directly on the top of the stove and as soon as it hits a certain temperature, the motor starts working, the stove fan will spin faster when it’s hotter.



Which type of stove does the stove fan work with?



No matter which stove you have: gas, electric, pellet stove or wood burning stove, catalytic and non-catalytic, stove fans will work well.



About Tomersun 4-blade Heat Powered Stove Fan

Material: Anodized aluminum

Noise<25db

Net weight: 525g

Shipping weight:770g

Base size: 7.1*10cm

Overall Size: 16W*12D*21Hcm

Air Flow: 150~180CFM

Operating temperature:85°C - 350°C(185°F - 660°F)



Welcome to our store! We are striving to provide you with great shopping experience. Please rest assured that our products have been well tested, examined, and packaged before shipping out.

Any question please feel free to contact us first and we will respond and provide great solutions for you immediately.

• Necessary Fireplace Accessories- the stove fan is widely used for gas, electric, pellet stove or wood burning stove, stove fans will work well and disperse hot air efficiently. wood stove fireplace fan
• Eco Friendly-The stove fan is powered by heat from your fireplace or wood burning stove, no batteries or electricity required. The hotter the stove is, the faster the stove fan spins. wood stove fireplace fan
• Silent Operation- The only moving part of the stove fan is the blades assembly, so the working noise is below 25DB, very quiet. You even do not know the stove fan is there, but you will feel the warmth well. wood stove fireplace fan
• Operating Temperature- The general working temperature of the stove fan is 85°C - 350°C(185°F - 660°F). Usually the fan gets spinning at about 55°C, and turns most efficiently when the temperature reaches about 250°C-300°C. wood stove fireplace fan
• Overheating Protection-The In-built Bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the thermoelectric module. wood stove fireplace fan

User questions & answers

Question:	How many CFM's does this develop
Answer:	More like cim, cubic inch per minute.
Question:	will this work if I put it on the hearth of my fireplace. note it is not a wood burning stove
Answer:	Depending on how much heat come out of the hearth area, it should work. I have mine on a gas fireplace and hung on wire to get it front of heat. I've been using it this way for 2 months and I'm very happy with it.
Question:	Will this work in my ash catcher to circulate debris
Answer:	Probably not.
Question:	Could this be used on top of a dyna-glo kerosene heater
Answer:	I use it on my dyna-glo and it works perfectly. I took the top of the cage off which was only 2 screws so i could place the fan directly on top of the heater. It blows on high speed and moves air well.