4 best ac mounts

Product description

LS Passenger Side Low Mount A/C Bracket SD7B10 Truck, VVT 2010-15 Camaro Spacing

DD-LS-AC-LM



Passenger side low mount A/C bracket kit. This is a complete kit for installing the Sanden SD7B10 mini compressor on the lower passenger side of LS engines. Laser cut and CNC bent from .250 cold roll plate steel. Black texture powder coated and includes CNC lathe cut 6061-T6 billet aluminum spacers and grade 8 zinc coated bolts. Includes belt tensioner. This places the compressor as tight as you can get to the block and runs on the inside 4 rib belt. Will fit 1997-2015 LS engines, Gen 3 and Gen 4. From the center of the crank to the furthest outside point measures 10 5/8 inches.

* Belt not included.

• Powder coated
• Fits Sanden SD7B10 Compressor
• Passenger Side Low Mount

Product description

The PS1916D1U 16-Outlet 1U Rack-Mount AC Charger Power Strip provides high-speed charging for up to 16 mobile devices simultaneously, such as notebooks, netbooks, tablets and other battery-intensive electronics that use a NEMA 5-15P plug.

This power strip features 16 built-in NEMA 5-15R AC outlets attached to convenient dongles that easily accommodate large transformer plugs. It’s compatible with all devices that charge via standard AC outlets (such as Chromebooks, MacBook Airs and Ultrabooks) or user-supplied USB power adapters (such as smartphones, iPads, Kindles, Kindle Fires and Surface models).

The all-steel PS1916D1U mounts into 1U of two- or four-post rack space using the included hardware. The NEMA 5-15P input plug is attached to a 15-foot power cord long enough to reach a PDU or AC wall outlet. A 15-amp circuit breaker protects against overloads and short circuits. A transparent cover guards the lighted on/off switch from accidental shutdowns.

2-year limited warranty.

Charges Up to 16 Electronic Devices at the Same Time

• Compatible with all devices that charge via standard AC outlets, including Chromebooks, MacBook Airs and Ultrabooks
• Compatible with all devices that charge via user-supplied USB adapters, including smartphones, iPads, Kindles, Kindle Fires and Surface tablets
• Convenient dongles easily accommodate large transformer plugs

Keeps Equipment Safe and Secure

• 15A circuit breaker protects against overloads and short circuits
• Transparent cover guards lighted on/off switch from accidental shutdowns

Mounts Easily to Rack

• All-steel unit mounts into 1U of 2- or 4-post rack space
• Mounting hardware included
• 15 ft. power cord with NEMA 5-15P plug long enough to reach PDU or wall socket

• 16 OUTLETS: This power strip features 16 built-in NEMA 5-15R AC outlets attached to convenient dongles that easily accommodate large transformer plugs. Provides high-speed charging for up to 16 mobile devices simultaneously.
• RACKMOUNT AC CHARGER: All-steel unit mounts into 1U of 2- or 4-post rack space. Mounting hardware included. 15 ft. power cord with NEMA 5-15P plug long enough to reach a wall socket.
• COMPATIBILITY: Compatible with all devices that charge via standard AC outlets or user-supplied USB adapters. Perfect for Chromebooks, MacBook Airs, Ultrabooks, smartphones, iPads, Kindles, Kindle Fires and Surface tablet models.
• ALUMINUM HOUSING WITH PREMIUM SAFETY FEATURES: 15A circuit breaker protects against overloads and short circuits. Power strip outlet offers transparent cover guards lighted on/off switch from accidental shutdowns. Tested to UL60950-1 (USA) and CAN/CSA-C22.2 No. 60950-1 (Canada).

User questions & answers

Question:	Is this a power conditioner
Answer:	No. It is more for multiple large wall warts. It has 16 plugs. It is not a power conditioner.
Question:	I want to use this to connect midi keyboard, mpc, audio interface etc to my pc. does this connect to a computer
Answer:	On the spec list: Supports USB 2.0 data transfer rates up to 480 Mbps
Question:	Is this only for charging or does it support connecting multiple USB devices to one computer? Confused about that
Answer:	It does support syncing and charging. I've used these several times for creating custom retail installations out of Android devices. The setup required that they all need to be charging and connected to a computer via android debugger (adb) at the same time and these do the trick. Internally the way it's connected is a 4 port USB hub, connected to 4 more USB hubs. It works best when you have a dedicated USB Host card per "rail". Daisy chaining them will cause you to run into the 127 device USB limit per host. When doing my installations I've used a trashcan MacPro with 6 Thunderbolt->USB adapters each connected to one Tripp Lite.
Question:	How many amps does the breaker need to support? Will this blow a typical 15 amp breaker
Answer:	A 15 amp breaker will handle this fine.
Question:	Can this be used on an LS3 corvette engine
Answer:	My engine is a LS1 5.3 it worked great for my engine because I needed my AC on top to clear the frame.
Question:	Will this kit work on a 2014 camaro ss engine swap into a 95 s10 frame
Answer:	You need to use part number DD-LS-ALT-PS-2-AC-SAN-VVT. If you kept the stock 2014 Camaro water pump on the engine, this bracket accomodates the 2014 Camaro water pump spacing. This bracket also moves the power steering up, so the power steering pump pulley clears the steering box. For this kit, you use a power steering pump and pulley from a 1990-1995 Chevy V8 Truck.
Question:	What belt and ac lines fit
Answer:	Truck accessories using Dirty Dingo billet Alt/PS low mount bracket- DD-LS-ALT-PS Small case alternator Gates K060975 Large case alternator Gates K060984
Question:	does it come with the idler pulley and belt tenslor
Answer:	"Includes new Gates idler pulley and Gates monster spring loaded belt tensioner. " Verbatim from the product description.

Product features

16-Outlet 1U Rack-Mount AC Charger Power Strip

The PS1916D1U provides rack-mountable, high-speed charging for up to 16 devices simultaneously. Recharge notebooks, netbooks, tablets, smartphones and other battery-intensive electronics that use a NEMA 5-15P plug, or a user-supplied USB power adapter.

Flexible and Space-Efficient Mounting Multi-Outlet Power Distribution

The all-steel PS1916D1U mounts into 1U of rack space in a 2- or 4-post rack using the included hardware. The NEMA 5-15P input plug is attached to a 15-foot power cord long enough to reach a PDU or AC wall outlet, adding flexibility to your installation.

The PS1916D1U can charge up to 16 devices at the same time. This power strip features 16 dongle-style outlets that easily accommodate large transformer plugs. It’s compatible with all devices that charge via standard AC outlets (such as the Chromebook, MacBook Air or Ultrabook) or via a user-supplied USB power adapter (such as a smartphone, iPad, Kindle or Surface).

Premium Safety Features and 2-Year Warranty

The lighted on/off switch features a transparent cover that eliminates accidental shut-offs while still allowing you to see at a glance whether the PS1916D1U is turned on. A built-in, 15-amp circuit breaker prevents dangerous circuit overloads that could damage equipment. The breaker immediately shuts off AC input to the PS1916D1U when it detects that the equipment load is drawing too much power.

The PS1916D1U comes with a 2-year warranty. It’s manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite’s commitment to environmental responsibility.

Why Choose Tripp Lite?

Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosure cabinets, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.

Product description

The SRCOOL7KRM Rack-Mounted Air Conditioning Unit pumps 7,000 BTU/h (2.0 kW) of close-coupled cooling power into your IT equipment to prevent shutdowns, malfunctions and failures caused by overheating. This space-saving, energy-efficient unit is perfect for data centers, server rooms, network closets and other environments with heat-sensitive rack-mounted equipment and limited floor space.

The self-contained SRCOOL7KRM mounts just like any other rack equipment in 8U of space at the top or bottom of a rack enclosure. A magnetic air dam attaches to the front door of the rack enclosure to ensure that equipment draws cool air from the SRCOOL7KRM instead of drawing warm air from the room. Because it only cools the equipment inside the rack enclosure, the SRCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same result. The SRCOOL7KRM filters the air, and its built-in evaporator eliminates condensation, as well as the need for a floor drain or water collection tank.

The 7-foot cord plugs into a standard 15-amp (NEMA 5-15R) outlet. The unit restarts automatically after power failures, and you can use the built-in timer to schedule unattended shutdown and startup. The intuitive control panel includes a digital display and diagnostic LEDs to communicate operating conditions at a glance.

The optional SRCOOLNET2 remote management accessory (sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP, Web, SSH or telnet. The SRCOOLNET2 accessory also includes an ENVIROSENSE temperature and humidity sensor that allows you to link cooling output with temperature readings up to 12 feet away.

• Saves valuable floor space in IT environments
• Saves energy with efficient close coupled cooling
• Ideal for enclosures with perforated doors (not for use in enclosures with solid/plexiglass/glass doors)
• Provides 7,000 BTU / h (2.0 kW) of cooling capacity in a rack-mounted 8U chassis
• Directional output vent aims cool air upward or downward, allowing the unit to operate from the bottom or top of the rack enclosure
• Supports unattended shutdown and startup, including automatic restarts after power failures
• Intuitive front-panel controls with an informative digital display and diagnostic LEDs
• 1 Year Limited Warranty

User questions & answers

Question:	What is the correct diameter for a plastic drain line for external drainage (cooling mode without re-evaporation, see Sec. 6.2 in user manual
Answer:	Juan, so far as I know, the drain line came with the unit, but I haven't used it, and I'm not planning to use it. Regrettably, I can't answer your question.
Question:	Where can I get a piece of rubber tubing to connect to the condensation valve? For example, if we wanted to let the water drain into a container
Answer:	Get a section (sold by the foot or roll) of flexible tubing from Plumbing aisle at Home Depot. Make sure you get a hose clamp as well to secure tubing to equipment. Tubing should fit outlet. Clamp too.
Question:	I have no celing or window vent possibilities. Can I put the unit in the bathroom doorway to cool the bedroom and vent the exhaust into the bathroom
Answer:	You might be able to vent it through the ceiling exhaust fan, but just dumping the heat into the bathroom itself would be a very bad idea.
Question:	nothing was said about needed to duct the exhaust? it is very very hot
Answer:	Of course any/all A/C units generate heat. Yes, you will need to vent the hot air outside or into the attic. The unit comes with white, flexible ducting, which attacked by screwing the ducting into the discharge port on the rear of the unit. Should all be covered in the instructions. No such thing as an air conditioning unit that does not generate heat.

Product features

7,000 BTU Rack-Mounted Air Conditioning Unit with Network Management Support

The SRCOOL7KRM is the first EIA-compliant rack-mounted air conditioning unit designed to cool IT equipment. It cools up to 2.0 kW of rack-mounted equipment in a server room, MDF or network closet. It also filters and dehumidifies air.

Why is the SRCOOL7KRM a Good Investment?

This rack-mounted air conditioning unit solves cooling problems where it isn't practical, efficient or affordable to install or expand computer room air conditioning (CRAC) or HVAC capacity. When IT equipment is installed in an improvised space or new equipment overwhelms existing cooling systems, additional cooling is required to ensure reliable performance and prevent damage. This air conditioning unit provides the cooling capacity to solve heat-related problems without requiring a major capital expenditure, a disruptive construction project, installation assistance from costly specialists or time-consuming maintenance.

Common Applications

The SRCOOL7KRM is the first EIA-compliant rack-mounted air conditioning unit designed to cool IT equipment. Its 8U rack chassis mounts in the bottom of a standard 19-inch rack enclosure and saves valuable floor space in cramped IT environments like server rooms, MDFs and network closets. It cools up to 2.0 kW of rack-mounted equipment housed in a single enclosure, including servers, switches and other heat-sensitive network hardware. It also dehumidifies and filters the air. The cooling output vent directs cold air upward from the unit's position at the bottom of the rack enclosure. The included magnetic air dam kit optimizes airflow and can be trimmed with scissors to match front-door ventilation patterns from most rack manufacturers.

Engineered for IT Environments

The difference between consumer-grade air conditioners and SmartRack cooling solutions is like the difference between home computers and purpose-built servers. Although it may be possible to install server software on a home computer, it will never have the convenience, manageability, performance and resilience required for a high-availability IT environment.

Tripp Lite has engineered SmartRack cooling solutions from the ground up to meet the rigorous requirements of IT environments. Since the introduction of the award-winning SRCOOL12K, Tripp Lite has also used customer feedback and extensive IT application testing both in the field and the lab to improve SmartRack cooling solutions in every aspect from internal design to external packaging.

Close-Coupled Cooling

Installing air conditioning units closer to heat sources reduces distances required for delivery of cold air and removal of hot air, using less electricity to power fans. Close-coupled cooling also focuses cold air where it's actually needed instead of wasting energy to cool the entire room when that isn't the goal. This makes close-coupled air conditioning units more efficient than air conditioners installed at the room's perimeter or outside the room entirely, saving energy and reducing operating costs. Because close-coupled cooling is modular, it also allows you to reconfigure cooling on the fly to handle new equipment or newly detected hot spots.

Unattended Operation

After you plug it in and turn it on, you can focus on other tasks without interruption while it keeps things cool. The built-in evaporator prevents condensation from accumulating, which means that you never need to empty a water collection tank. If there's a power failure, the unit restarts automatically with its most recent settings, so you don't need to make a site visit to get things running again. You can also set the unit to turn on and off automatically. And if you want to keep a closer eye on cooling, the optional SRCOOLNET2 network management card allows you to monitor and control every aspect of the unit's operation from any location without leaving your desk.

Optional Network Management

There are two ways to manage this air conditioning unit:

1.Use the push-button control panel, LEDs and digital display to change settings, automate operation and monitor temperature locally.

2. Add the optional SRCOOLNET2 network management card to monitor temperatures, change settings, define threshold warnings, receive alerts, access logs and automate operation over the network via SNMP, Web, SSH or telnet. Using Tripp Lite's free PowerAlert NMS software, you can manage multiple air conditioning units from a central location and single interface.

Plug-and-Play Installation

This air conditioning unit can be installed by almost anyone, without the assistance of an electrician or HVAC specialist. It mounts just like any other rack equipment and plugs into a standard 15-amp outlet. The unit is completely self-contained and a built-in evaporator prevents condensation from accumulating, so it does not require an external condenser, refrigerant piping, floor drain or water collection tank. It ships with all the parts required for installation, including 4-post mounting hardware compatible with standard EIA-compliant rack enclosures.

Environmentally Responsible Design

- Ozone-Safe Refrigerant: This air conditioning unit's R410A refrigerant complies with environmental standards worldwide and does not contribute to ozone layer depletion.

- Close-Coupled Cooling: Close-coupled cooling systems are more efficient than traditional perimeter cooling systems. Close-coupled cooling helps you save money, save energy, reduce carbon emissions and protect the environment.

- RoHS Compliance: This product complies with the RoHS (Restriction of Hazardous Substances) Directive, which limits the use of hazardous substances in manufacturing.

Dependable Service from an Industry Leader

- One-Year Product Warranty: If this product proves defective in material or workmanship within that period, Tripp Lite will repair or replace it at no charge.

- Free Tech Support: Chicago-based, in-house tech specialists are available by phone, email and chat.

Industry Leader

- Over 90 Years: Founded in 1922, Tripp Lite has a long-established and proven track record of providing reliable products and responsive customer service.

- Trusted Name: From the smallest office to the largest data center, customers worldwide trust Tripp Lite to power, protect, manage and connect valuable IT equipment.

Product description

The AnyMount universal window air conditioner support bracket is easy to install for units up to 88 lbs. It can easily be assembled and placed in the window to support your window air conditioner from 5,000 to 10,000 BTU in size. Window Requirements: Window sill must be a minimum of 2 inches deep. Window sill must be able to accept 3.5 inch long screws. Window stool cannot exceed 1.5 inches. Cannot be used with slide casement or casement windows.cooling power:10000

• DESIGNED FOR EASY SETUP - Easily install from inside the comfort of your home in minutes. Safe, durable and convenient.
• UNIVERSAL design works with most window units 5,000 to 10,000 BTU in size and supports up to 88 lbs. (check description below for window requirements). All weather stainless steel construction.
• BONUS - Exclusive precision bubble level assures proper mounting angle.
• WINDOW REQUIREMENTS - Mounts on any surface up to 10.4 in from the wall and 4.5 in - 6.6 in adjustable height.
• EVERYTHING INCLUDED - All necessary hardware included.

User questions & answers

Question:	Does it require drill outside
Answer:	You must attach this brace to the OUTside of the window's sill (which can easily be accomplished from within the room).
Question:	Need a/c bkts for a window that has still
Answer:	All of my windows needed them.
Question:	I have a marble window sill so can't drill into it. won't the weight of a 5000 btu the unit hold the bracket in place? what is the alternative
Answer:	You may want to look at other (more expensive) no drill brackets available on Amazon. As an alternative, you might want to consider adhering it to the bottom of the A/C unit, but even then you should consider the bracket as simply extra support. With that said, a modern 5000 BTU unit shouldn't be a problem. I have one in a sliding window that is supported by only a 1x2 across the top, with that braced against the width of the window by only the weight of the unit, and secured to the rail across the top of the A/C unit by a single screw (and the weight of the unit against the 1x2), and have had no issues over the years.
Question:	Does it require drilling into inside sill
Answer:	It requires drilling and attachment, via screws, into the EXTERIOR of the window-sill...NOT the INterior.

Product features

Safe

Durable

Convenient

Supports 5,000 To 10,000 BTU

Supports Up To 88 Lbs

Built-In Precision Bubble Level