13 best air king ceiling fans

Product description

Cool and Circulate Air at Work

The Air King 9318 Industrial Grade Wall Fan is used to cool and circulate air in industrial or commercial settings including, loading docks, warehouses, health clubs and other commercial spaces. This fan can be mounted to walls, ceilings or steel beams to save floor and table space. The 9318 is suitable for busy warehouses or bustling gyms and keeps the power cord off the ground for high traffic areas. With a powerful motor and steel construction, this fan is the perfect solution for instant air circulation and cooling. Air King added a powder coated finish to the blade guard and mount for years of optimal performance. This unit is tested in accordance with AMCA standard 230.99, meets the made in America requirements of ARRA and is ETL and OSHA compliant. It comes with a 1-year limited warranty to protect against defects in materials and workmanship. Air King equipped this model with a powerful 3-speed, 1-phase motor that's fully enclosed for quiet operation and is rated at 120-volts, 1/6-horsepower and has 3-speed settings for cubic feet per minute of 3190, 2970, 2660 on high, medium and low and rotations per minute of 1500, 1300, 1100 on high, medium and low. The motor is rated for 1.5, 1.3 and 1 amps and 180, 150 and 125 watts. The industrial grade fan motor means high velocity air circulation with little to no maintenance.

Additional Features for a Dependable Work Fan

This fan features a pivoting head to direct airflow and an easy mount for fast installation. Other features include a rear mounted pull cord and powder coated, steel blade guard. The blade guard, motor housing and mount are finished in black. This unit includes a 9-foot, 3-conductor SJT type power cord and measures 21.5-inches (L) by 16-inches (W) by 21-inches (H) with an 21.4-pound weight.

About Air King

Air King offers a full line of industrial grade and commercial grade air circulating solutions. Whether it's for an industrial setting such as a manufacturing plant, warehouse or factory or a commercial setting such as an office, school or hospital, Air King has the perfect solution for you. Air King is known for its powerful motors that last for years.

• 18-Inch powder coated metal blade
• 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed ball bearing motor
• Rear mounted pull cord switch and a black, 9-foot, 3-conductor SJT type power cord
• ETL and OSHA compliant; Tested in accordance with AMCA standard 230.99
• Up to 3190 CFM
• 3190 CFM

User questions & answers

Question:	Can this multi mount be used as a floor stand or will it tip or fall over
Answer:	Yes this could be used on pets, but these are thinning shears and won't cut every hair between the blades.
Question:	Can the angle of this fan be adjusted left or right? Need to install on the ceiling stud of a covered deck but angle it from a corner
Answer:	Yes.
Question:	Does this come with the wall mount bracket or is it sold separately
Answer:	Right
Question:	Is this fan suitable for mounting outside, in the weather
Answer:	They seem to be nice shears and I like the comb that came with it!

Product features

Air King 9318 Industrial Grade High Velocity Multi Mount Fan

• Motor- 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed, ball bearing, permanently lubricated, permanent split capacitor
• Controls- Rear mounted pull cord switch
• Power Cord- Black, 9', 3-conductor, SJT type
• Coating- Blade, Guard, and Mounts are powder coated steel

Product description

The Air King 9718 18-Inch Industrial Grade Ceiling Mount Fan is ideal for use in offices, stores, garages, warehouses and any other industrial space that needs powerful air circulation. The 18-inch, 3-blade fan is constructed of powder-coated steel for long-lasting durability. The rotary switches located on the back allow you to turn the fan on or off and change between speeds. The 1/6-horsepower, fully enclosed, permanently lubricated motor with a split capacitor provides a quiet performance and produces a lot of air flow. Additionally, this fan is ETL and OSHA approved and a 10-foot, 3-conductor type SJT power cord is provided for long reach. The fan measure 24-inches long by 10.5-inches wide by 28-inches high and weighs 23.1-pounds. The Air King 9718 18-Inch Industrial Grade Ceiling Mount Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products. This product is not compatible with and will not work with any controller or dimmer.

• 18-inch ceiling mount fan ideal for any industrial space that needs powerful air circulation
• Constructed of powder-coated steel for long-lasting durability
• 1/6-horsepower, fully enclosed, permanently lubricated motor
• 10-foot, 3-conductor type SJT power cord
• Comes with a 1-year limited warranty
• 8780 CFM

User questions & answers

Question:	Is this fan weather resistant? I need one that an hold up to being munted under a porch awning
Answer:	I use my fan in my garage. I am located in Southeast Georgia, and relative humidity is always very high. I have not had any problems with its operation or with it rusting. I am glad I bought this fan, and I think you will be happy with the performance and the esthetics. I would recommend it for under a porch awning.
Question:	is it a plug into a wall socket
Answer:	Yes. Three way prong plug in. We bought 2 for back patio, and they're great.
Question:	Does the pivot point have a way to adjust for angle of fan
Answer:	Yea, fan base rotates and it tilts on the pivot. You can point the fan anywhere.
Question:	Is the fan oscilating
Answer:	No it's not oscillating, but u can easily turn it in any direction u want very easily with one hand.

Product features

Air King 9718 18-Inch Industrial Grade Ceiling Mount Fan

• Motor: 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed, ball bearing, permanently lubricated, permanent split capacitor
• Controls: Rear mounted pull cord switch
• Power Cord: Black, 9', 3-conductor, SJT type
• Coating: Blade, Guard, and Mounts are powder coated steel

Product description

The Air King 9518 18-Inch Industrial Grade Wall Mount Fan is ideal for plants, warehouses, large offices and other industrial spaces that require powerful air circulation. This 18-inch, 3-blade fan is constructed of powder coated steel for long-lasting durability. The pull cord switch located on the back allow you to turn the fan on or off and change between speeds. The 1/6-horsepower permanently lubricated motor provides a quiet performance and produces a lot of air flow. The 1 phase motor also features a permanent split capacitor and runs at 120-volts. Additionally, this fan is ETL and OSHA approved and a 9-foot, 3-conductor type SPT power cord is provided for long reach. Measures 24-inches long by 16.5-inches wide by 28-inches high and weighs 24.8-pounds. The Air King 9518 18-Inch Industrial Grade Wall Mount Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

• 18-inch industrial grade 3-speed fan
• Permanently lubricated 1/6-horsepower motor
• Constructed of powder coated steel for long-lasting durability
• 9-foot, 3-conductor type SPT power cord
• Comes with a 1-year limited warranty; Dimensions (Length/Width/Height) - 24" x 16.5" x 28"
• 7450 CFM

User questions & answers

Question:	Does this fan push air forward, or is it more of a circulator that pushes air outward radially from the edges like the 20" version
Answer:	Forward
Question:	Can this fan be hard wired to a switch
Answer:	With the addition of a junction box for connecting cord to switch circuit
Question:	Does this come with the wall mounting bracket
Answer:	normally no.it comes with the half round bracket attached to the fan itself but not the wall mounting bracket.
Question:	Does this fan Oscillate
Answer:	No it does not

Product features

Air King 9518 18-Inch Industrial Grade Wall Mount Fan

• Motor: 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed, ball bearing, permanently lubricated, permanent split capacitor
• Controls: Rear mounted pull cord switch
• Power Cord: Black, 9', 3-conductor, SJT type
• Coating: Blade, Guard, and Mounts are powder coated steel

Product description

The Air King BFQ50 ENERGY STAR® Qualified SNAP-IN Exhaust Fan features a unique UL listed molded high impact plastic housing that provides multiple benefits. This high performance bath fan is constructed of a molded plastic housing, with no welds to break, and works as a natural sound absorbent. If you live anywhere near salt water, or the unit will be used in high moisture areas, this fan is a must. The high impact housing will not rust, giving the unit a longer life. Easily installs using the SNAP-IN Mounting System. Install the mounting bracket, SNAP the fan in place, connect the wiring and the ducting, and you are done. Installing an exhuast fan can now be done in minutes instead of hours. The 4-inch plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. UL listed for use over a tub or shower when installed in a GFCI protected branch circuit. This unit features a 50-CFM blower at 0.5-sone which makes for quiet operation. Makes an excellent ASHRAE 62.2 local exhaust solution with an exhaust capacity for rooms of approximately 45 to 65 square feet. The housing measures 9.0625-inches wide by 8.5-inches deep by 4.75-inches high, is HVI certified and can be used to comply with the ventilation standards required by LEED for Homes and California Title 24 requirements. The Air King BFQ50 ENERGY STAR Qualified SNAP-IN Exhaust fan comes with a 5-year limited warranty. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

From the Manufacturer

What makes the air king high performance bath fan series unique is the UL listed molded high impact plastic housing that provides multiple benefits. "traditional" bath fan housings are fabricated from steel which involves bending and welding. This is a more expensive process and over the life of the fan welds can break, causing the fan to operate much louder or even with a rattling sound. Metal housings reverberate and echo noise. Because the air king high performance bath fan series is in an all plastic housing, there are no welds to break and the plastic is a natural sound absorbent material. If you live anywhere near salt water, or the unit will be used in high moisture areas, this fan is an almost must. The UL listed molded high impact plastic housing will not rust, giving the unit a longer life. The high performance exhaust fan series features a unique snap-in installation system. The included bracket nails or screws to the ceiling joist allowing the fan housing to "snap-in". This is so simple you can even replace an existing fan without having to rip out large sections of ceiling or climbing into the attic. Connect the wiring and the ducting, install the easy fitting grill and you are done. A bath fan installation can now be done in minutes instead of hours. The motors are suitable for continuous operation. The 4-Inch plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. This is an energy star model. UL listed for use over a tub or shower when installed in a GFCI protected branch circuit. This unit features a 50-CFM blower at 0.5-Sone which makes for quiet operation. Exhaust capacity for rooms of approximately 50-Square-Feet. Housing size: 9-1/16-Inch wide-by-8-1/2-Inch deep-by-4-3/4-Inch high.

• White, polymeric grill measures 10" x 10", with durable high-impact plastic housing for quiet operation and enhanced performance
• Operates at 50 CFM at 0.5 scones
• Features a special snap-in installation system for easy in-ceiling installation
• Comes with 4" plastic duct collar with back draft damper for quiet operation and draft protection
• Can handle continuous operation, is rated for ceilings insulated to R-40, Culus-listed, HVI 2100-certified, Title 24 compliant, ASHRAE 62.2 approved, and UL-listed for installation over a tub or shower on a GFCI circuit
• ENERGY STAR Qualified exhaust fan with high impact plastic housing to provide multiple benefits
• 50-CFM blower at 0.5 sones for almost silent operation

User questions & answers

Question:	Has anybody installed this unit in a pre-existing fan space? if so how easy was it to install and did you have to modify the ceiling very much
Answer:	it would take some fabrication but yes your probably better off looking for something that is made for a wall
Question:	Does this come with everything you need? I am replacing another fan, but am not sure if 3" or 4" ducting was used. I know it is louder with
Answer:	QC es3100 CFM Hi: 3081 / Low: 2020h
Question:	Can the fan be wall mounted
Answer:	It is a two speed fan but you can connect it up to run on a single speed (on high) or both speeds.
Question:	Hi folks, the product descriptions show two different noise level ratings. Was wondering is it rated at .5 sones or 1 sone? Thank you
Answer:	no it does not. I got the wifi hub and that made install pretty easy. they do sell a separate control switch

Product description

The Air King 9320 20-Inch 1/6-Horsepower Industrial Grade Ceiling Mount Fan is ideal for gyms, auditoriums, schools, churches and industrial spaces that need powerful air circulation. This fan features a motor that is 3-speed, 120-volts, 1-phase, totally enclosed, ball bearing, permanently lubricated with a permanent split capacitor. The 9320 produces CFM's of 3,670, 3,330 and 2,940 (High, Medium, Low) and RPM's of 1,500, 1,310 and 1,050 (High, Medium, Low). This fan includes a rear mounted pull cord switch and a black, 9-foot, 3-conductor SJT type power cord. The blades, guard and mounts are constructed of powder coated steel. This fan is ETL and OSHA compliant and has been tested in accordance with AMCA standard 230.99. The 9320 measures 26-1/2-inches long by 10-1/2-inches wide by 29-1/2-inches high and weighs 23.7-pounds. The Air King 9320 20-Inch 1/6-Horsepower Industrial Grade Ceiling Mount Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.This product is not compatible with and will not work with any controller or dimmer.

• 20-inch powder coated metal blade
• 3-speed, 1/6-Horsepower, 120-volt, 1-phase, totally enclosed ball bearing motor
• Rear mounted pull cord switch and a black, 10-foot, 3-conductor SJT type power cord
• ETL and OSHA compliant and tested in accordance with AMCA standard 230.99
• Comes with a 1-year limited warranty
• 3670 CFM

User questions & answers

Question:	I need the bracket to attach to both side of the fan. They rusted out. Please help me love my 4 fans under the porch
Answer:	depends on the pitch
Question:	Is it really necessary to attach the "secondary support cable"? Did anyone install theirs without it
Answer:	I love this fan. I've had two of the northern tools pedestal type both of them died within 2 years. I expect this one to last for years and it doesn't eat up floor space.
Question:	Will this work outdoors- where it will get rained on
Answer:	Yes. There is a knob on the bottom of the fan body. The rotation can be turned off in any selected position by pulling the knob out.
Question:	I want to install this in my bedroom from the ceiling and use a wall switch to turn it on. Too loud? Can this be done
Answer:	With mount it is 17 inch from ceiling to bottom of motor housing. Total drop from ceiling to bottom of fan is 36 inches.

Product description

Cool and Circulate Air at Work

The Air King 9020 Industrial Grade Wall Fan is perfect to cool and circulate air in industrial or commercial settings including, loading docks, warehouses, churches and health clubs. This fan is mounted to a wall to save floor and table space. The 9020 keeps the power cord off the ground for high traffic areas. With a powerful motor and steel construction, this fan is the perfect solution for instant air circulation and cooling. Air King added a powder coated finish to the blade guard and mount for years of optimal performance. This unit is tested in accordance with AMCA standard 230.99, meets the made in America requirements of ARRA and is ETL and OSHA compliant. It comes with a 1-year limited warranty to protect against defects in materials and workmanship.

Adjustable Settings with a Powerful Motor

Air King equipped this model with a powerful 3-speed, 1-phase motor and a permanently lubricated permanent split capacitor. The motor is rated at 120-volts, 1/6-horsepower and has 3-speed settings for cubic feet per minute of 3670, 3330, 2940 on high, medium and low and rotations per minute of 1500, 1310, 1050 on high, medium and low. The motor is rated for 1.6, 1.3 and 1.1 amps and 184, 155 and 130 watts. The industrial grade fan motor means high velocity air circulation with little to no maintenance. This unit features a pivoting head to direct airflow and an easy mount for fast installation. Other features include a rear mounted pull cord and powder coated, steel blade guard. The blade guard, motor housing and mount are finished in black. This unit includes a 9-foot, 3-conductor SJT type power cord and measures 26.5-inches (L) by 16.5-inches (W) by 29.5-inches (H) with an 26-pound weight.

About Air King

Air King offers a full line of industrial grade and commercial grade air circulating solutions. Whether it's for an industrial setting such as a manufacturing plant, warehouse or factory or a commercial setting such as an office, school or hospital, Air King has the perfect solution for you. Air King is known for its powerful motors that last for years.

• 20-Inch powder coated metal blade
• 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed ball bearing motor
• Rear mounted pull cord switch and a black, 9-foot, 3-conductor SJT type power cord.Frequency:60 Hz
• ETL and OSHA compliant; Tested in accordance with AMCA standard 230.99
• Up to 3670 CFM.Maximum Sound Level:62 dB
• 3670 CFM

User questions & answers

Question:	Can this fan be mounted in the corner? Also, is the mounting hardware in the box
Answer:	1) Don't know but there is no difference between CFL or Incandescent. Both bulb receptacles (nite lite and regular lite) will accept both types of bulbs. The switches included are just on/off switches so there is no preference there either (if there was a dimmer then it would make a difference). The system is designed to supply 120VAC to all 4 receptacles over a 12 AWG (20Amp) wire - it doesn't care if there is an incandescent, LED or fluorescent screwed in. the nite lite receptacle is rated for 28W maximum and they don't recommend going over 60W for the main bulb - these are ratings for incandescent bulbs obviously.2) Specifications have the CFM at 60. I didn't measure:)3)There are two switch assemblies included and each switch assembly has two switches for a total of four switches (nite lite, regular lite, heater, exhaust fan). These switches will fit into a 2 gang electrical box and each assembly has a footprint very similar to a regular duplex outlet with a rocker switch on top and bottom. You need a 12/2 (ground, black, and white wires) cable coming from the electrical service panel into the box and you need either two '12/3' or three '12/2' cables going from the box to the Airking. this is because you need a common, a ground, and four hot wires going from the box to the Air king. As far as the wiring inside the airking ... Let me warn you - it's designed for man strength hands that are also toddler sized. Very tight fit to get all those wires nutted and connected inside the Airking. Also, prior to doing the wiring make sure your exhaust fan wheel is tight (it shouldn't rattle). It's easy to tighten before the wires are in but not so easy afterwards. One final note, this device requires it's own 20A circuit - can't put it on the same branch as your vanity lights or outlets. Hope this helps.
Question:	If installed can I turn this fan left and right
Answer:	I have only had to contact amazon once about a problem and it was handled quiet well. I was very pleased with the service. You need to contact the company first and give them a chance to help you, if they don't then call amazon. You should e mail the Co through amazon.
Question:	How well would this fan work in a 20'X25' home gym? Thanks
Answer:	My Air King is White as in the picture. I don't recall the mention of yellow in the description when I purchased mine. Function was most important to me and I'm well pleased with it's operation.
Question:	Can this fax be mounted on the ceiling
Answer:	Bought this last year. The switch is not included. But they are cheap and any electrician should be able to install. If you are replacing an existing exhaust you may need to add wires to use all four functions.

Product features

20" Wall Mount Fan

Motor: 3-speed, 1/6 HP, 120V, 1 phase, totally enclosed, ball bearing, permanently lubricated, permanent split capacitor

Controls: Rear mounted pull cord switch

Power Cord: Black, 9', 3-conductor, SJT type

Coating: Blade, Gaurd, and Mounts are powder coated steel

Product description

The Air King AK80 Energy Star Quiet Series Bath Fan provides cost effective, energy efficient ventilation at low sound levels and features a contoured grill that almost disappears into the ceiling. At the highest point the grill only projects down 0.5-inches from the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation with minimal sound. Easily install the fan by using the included adjustable hanging brackets and the side access panel allows you to wire the fan without removing internal components. The 4-inch round duct connector with gasketed damper protects against back drafts from entering the room. The motors are suitable for continuous use. UL listed for installation over a tub or shower when wired on a GFCI circuit. This unit features a 80-CFM blower at 1.5-sone which makes for quiet operation, an exhaust capacity for rooms of approximately 80-square feet, housing that measures 10.875-inches wide by 9.375-inches deep by 7.875-inches high and is HVI certified. The Air King AK80 Energy Star Quiet Series Bath Fan comes with a 5-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

From the Manufacturer

The energy star quiet series provides cost effective, energy efficient ventilation at low sound levels and features a contoured grill that almost disappears into the ceiling. At the highest point the grill only projects down 1/2-Inchfrom the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation with minimal sound. Plastic damper protects against back drafts. The motors are suitable for continuous use. The unit is UL listed for installation over a tub or shower when wired on a GFCI circuit. Easily installs using the included adjustable hanging brackets. Model AK80 is 80-CFM at 1.5-Sone provides exhaust capacity for rooms of approximately 80-Square-Feet. This is an energy star model. Duct size is 4-Inch. Hvi2100 certified. Housing size: 10-7/8-Inch wide-by-9-3/8-Inch deep-by-7-7/8-Inch high.

• Exhaust fan grill's highest projection point is 1/2" down from ceiling and measures 11" wide x 13.75" deep; housing measures 10-7/8" length x 9-3/8" wide x 7-7/8" deep
• Operates at 80 CFM at 1.5 sones, and easily installs with adjustable hanging brackets for 16" centers
• Electronically balanced centrifugal blower wheel provides top-notch ventilation with reduced sound
• Fan is made for continuous operation and can satisfy the needs of an 80 sq. ft. bathroom
• Comes with a 4" round connector with spring-loaded metal damper, offering superior protection against back drafts
• Energy Star high performance bath fan with low sound levels and a contoured grill
• 80-CFM blower at 1.5-sone for quiet operation

User questions & answers

Question:	Is there a new air king model that would fit in the same housing
Answer:	There are several fans that will fit into the same space as this unit. This would depend on what you are trying to accomplish.
Question:	Does the frak80 come with the fan, damper, and housing
Answer:	I got model AK80 and it includes the fan and housing. You will have to buy the what's necessary to exhaust the fan from the housing to the outdoors.

Product description

The Air King AK200LS Energy Star Deluxe Quiet Series Bath Fan provides cost effective, energy efficient ventilation at low sound levels and features a contoured grill that almost disappears into the ceiling. At the highest point the grill only projects down 0.5-inches from the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation with minimal sound. Easily install the fan by using the included adjustable hanging brackets and the side access panel allows you to wire the fan without removing internal components. The 6-inch round duct connector with gasketed damper protects against back drafts from entering the room. The motors are suitable for continuous use. UL listed for installation over a tub or shower when wired on a GFCI circuit. This unit features a 200-CFM blower at 1.4-sone which makes for quiet operation, an exhaust capacity for rooms of approximately 200-square feet, housing that measures 12.875-inches wide by 12.75-inches deep by 9.875-inches high and is HVI certified. The Air King AK200LS Energy Star Deluxe Quiet Series Bath Fan comes with a 5-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

From the Manufacturer

The energy star deluxe quiet series provides cost effective, energy efficient ventilation at low sound levels and features a contoured grill that almost disappears into the ceiling. At the highest point the grill only projects down 1/2-Inch from the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation with minimal sound. A side access panel allows you to wire the fan without removing internal components. A spring loaded metal damper protects against back drafts. The motors are suitable for continuous use. The unit is UL listed for installation over a tub or shower when wired on a GFCI circuit. Easily installs using the included adjustable hanging brackets. This is an energy star model, hvi2100 certified with a 6-Inch duct size. It provides 210-CFM of ventilation at 2.0-Sone. It provides exhaust capacity for rooms of approximately 210-Square-Feet. Housing size: 12-7/8-Inch wide-by-12-3/4-Inch deep-by-9-7/8-Inch high.

• Energy Star high performance bath fan with low sound levels and a contoured grill
• 200-CFM blower at 1.4-sone for quiet operation
• Exhaust capacity for rooms of approximately 200-square feet
• Easily install by using the included adjustable hanging brackets
• Comes with a 5-year limited warranty

User questions & answers

Question:	Will this unit (110 CFM) adequately ventiliate and area of approximately 200 square feet
Answer:	No, 110 cfm would equate to a 100 sft room size
Question:	I need the replacement cover for the air king 110ls bath fan. do you sell just the covers
Answer:	Do a search. It's a part, so I would think it is sold separetly.
Question:	Can the 6 to 4 inch duct reducer be used on the airking 150 ls fan
Answer:	Yes you can, But, You would really be much better off using a 6" duct Using the 4" duct will definitely result in a reduced air flow and more noise than using a 6" duct. Any reduction in size creates back pressure and/or increased velocity. One will reduce the amount of discharge and the other will increase the sound of air movement. A 6" duct has over twice the area of a 4" one. If you go with the 4" I would recommend that you try the fan (Tissue Test) with just the 6" duct connected and notice how it performs and then connect it to the 4" reducer and duct and then note the difference then just take back the one donot want...
Question:	Where can i buy a replacememt grille
Answer:	Go to an electrical supply house. They should be able to order it for you.

Product description

The Air King DRLC702 Round Bath Fan with Light is designed to bring style to the home, allowing the exhaust fan to be a decorative element of the room. This unit combines quiet operation with a decorative round grill and a stylish frosted ribbed moonstone glass light lens. The glass lens diffuses light throughout the entire room and ensures a long life without the yellowing that can occur with a traditional plastic lens. The fan features 26-watt medium base energy efficient fluorescent lamps or 60-watt incandescent lights (bulbs not included) to provide excellent illumination and can be operated separately from the fan. Easily install the fan by using the included adjustable hanging brackets. The 4-inch plastic damper insures quiet operation and prevents back drafts from entering the room. UL listed for use over a tub or shower when installed in a GFCI protected branch circuit. This unit features a 70-CFM blower at 4-sone which makes for quiet operation, an exhaust capacity for room of approximately 70-square feet, housing that measures 7.375-inches wide by 7.625-inches deep by 5.875-inches high and is HVI certified. The Air King DRLC702 Round Bath Fan with Light comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

From the Manufacturer

The decorative series of air king exhaust fans are designed to bring style to the home, allowing the exhaust to be a decorative element of the room. With multiple models and finishes, air king has the unit to enhance almost any decor. The round fan with light combines quiet operation with a decorative round grill and a stylish frosted ribbed glass light lens. Air king's decorative series of exhaust fans with light feature a glass light lens to ensure long life without the yellowing that can occur with a traditional plastic lens. The frosted ribbed glass light lens diffuses light throughout the entire room. The exhaust fan and light can be wired separately and the unit is easily installed using either the included hanger brackets or housing mounting tabs. Two 60-Watt incandescent lights (bulbs not included) provide excellent illumination. A plastic damper protects against back drafts and ensures quiet operation. This unit has a 70-CFM blower at 4.0-Sone. UL listed for installation over a tub or shower when installed on a GFCI circuit. It provides exhaust capacity for rooms of approximately 70-Square-Feet. Housing size: 7-3/8-Inch wide-by-7-5/8-Inch deep-by-5-7/8-Inch high. This models grill is finished in nickel.

• Decorative bath fan comes with a stylish grill (13-1/2" diameter) in nickel finish and ribbed frosted glass light lens, giving your bathroom a sophisticated and illuminating glow, along with an even distribution of light
• Operates at 70 CFM at 4.0 scones, and comes with a 4" round duct collar with damper for quiet operation and protection against back drafts
• Exhaust fan and light can be wired to function separately
• Easy installation with included adjustable hanging brackets or housing mounting tabs
• Uses two 60-watt maximum standard, type A19 medium base bulbs (not included)
• Bath fan with light designed to bring style to your home
• 70-CFM blower at 4-sone for quiet operation

User questions & answers

Question:	What is the diameter of the glass
Answer:	The fan can be tilted downward. I have my fan attached to the wall at about 74 inches, and tilted downward so that the air blows across the bed. My ceilings were too low for a ceiling fan, so this is my alternative. It works very well.
Question:	We purchased and installed this fan over a year ago and it works Great! Fan is too loud for us, is there a quieter fan that could be installed
Answer:	No, it is only for a wall, but it works great.
Question:	Can leds be used instead of flourecent or incandescent bulbs? leds provide better lighting & are more energy efficient so i'd rather use them if okay
Answer:	On low speed it's not loud But obviously on high it's pretty loud.It is a good quality commercial piece well made
Question:	Where can I find a replacement globe
Answer:	the 3 positions are as follows high 0.46 amps / 51 watts medium 0.37 amps / 44 watts low 0.32 amps / 39 watts

Product features

Decorative Exhaust Fan Series

• Moonstone glass light lens disperses light throughout the room
• Utilizes two medium base screw in type lamps (lamps not included). Accepts up to 15W LED, 26W CFL or 60W Incandescent type A19 lamps.
• Easily installs using the included adjustable hanging brackets
• 4" Plastic damper protects against backdrafts and ensures quiet operation
• All functions can be wired to operate separately.

Product description

The Air King 9312 Industrial Grade Wall Fan is used to cool and circulate air in industrial or commercial settings including loading docks, warehouses, health clubs and other commercial or industrial spaces. This fan can be monted to a wall, ceiling or I-beam to save floor space. With a powerful motor and steel construction this fan is the perfect cooling and air circulation solution. Air King has added a tough powder coat finish to the blade guard. This unit is tested in accordance with AMCA standard 230-99, meets the requirements of ARRA and is ETL and OSHA compliant. It copmes with a 1 year limited warranty. The fan is equipped with a 3 speed, 1 phase, open motor, sleeve bearing and permanent split capacitor. It moves 1360, 1170 or 1010 cfm on high, medium or low speed. The motor is rated at 0.8, 0.6 and 0.5 amps, 85, 76 and 64 watts and 56, 49 and 42 decibels on hegh, meduim and low speed. The fan head pivots to direct air flow. Features a single bolt mount for fast installation. Secondary support cable included. Other features include rear mounted pull cord, steel handle, steel blade guard and 9 foot, 3 conductor SJT type power cord.

About Air King

Air King is an industry leader and offers a full line of industrial grade and commercial grade air circulating solutions. Whether it's for an industrial setting such as a manufacturing plant, warehouse or factory or a commercial setting such as an office, school or hospital, Air King has the perfect solution for you. Air King is known for its powerful motors that last for years.

• 12-Inch powder coated metal blade
• Black, 9-foot, 3-conductor SJT type power cord
• Rear mounted pull cord switch
• ETL and OSHA compliant; Tested in accordance with AMCA standard 230.99
• Up to 1360 CFM
• 1360 CFM

User questions & answers

Question:	Can the stand be removed? I want to use this in a custom mount
Answer:	tes..the stand is removeable
Question:	Does it have plug-in style electrical wiring or does it have to be hard-wired
Answer:	It has a nice cord with plug, however you can.cut it off if you need to hard wire. It's not built for out door, however I use it under our eve pointed down at our patio table ...very nice. The cord in my circumstance could have been a bit longer 18" more but no big deal...nice quiet fan
Question:	Same question. I want it for outdoor patio and it will get wet. Can it be used outside
Answer:	Not an answer, but a question...did you find a fan which is UL rated for wet locations? I'm looking for one that will be on our patio outdoors as well and can't seem to find anything here on Amazon.
Question:	Is this UL3507 certified
Answer:	Yes...can be used in damp conditions.... Florida humidity for the past few years has no effect on the fan.

Product features

Air King 9312 Powder-Coated Steel Multi-Mount Wall Fan,

Motor: 3-speed, 1/25 HP, 120V, 1 phase, open motor, sleeve bearing, permanent split capacitor

Controls: Rear mounted pull cord switch

Power Cord: Black, 9', 3-conductor, SJT type

Coating:Blade, Guard, and Mounts are powder coated steel

Product description

The Air King 9374 24-Inch Industrial Grade Oscillating Ceiling Mount Fan is ideal for plants, warehouses, large offices and other industrial spaces that require powerful air circulation. The 9374 is a 24-inch, 90-degree oscillating ceiling mount fan with a rear mounted pull cord switch and a black, 10-foot, 3-conductor SJT type power cord. The motor is 3-speed, 1/3-horsepower, 120-volt, 1-phase, totally enclosed, ball bearing and permanently lubricated with a permanent split capacitor. This fan provides CFM's of 5770, 5250, 4270 on high, medium and low settings. Blade, guard and mounts are powder coated steel. The 9374 is ETL and OSHA compliant and has been tested in accordance with AMCA standard 230.99. The Air King 9374 24-Inch Industrial Grade Oscillating Ceiling Mount Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products. This product is not compatible with and will not work with any controller or dimmer.

• 24-inch industrial grade ceiling fan with a black finish
• Ideal for plants, warehouses, large offices and other industrial spaces
• 5770, 5250, 4270-CFM on high, medium and low settings
• ETL and OSHA compliant
• Comes with a 1-year limited warranty

User questions & answers

Question:	Does this work with a vaulted ceilng
Answer:	You would have to make a sturdier stand to attach it to.
Question:	Is it wet rated
Answer:	The fan is attached with a single bolt stud. When I attached to my deck, I first took a 2x4 piece about 2' long and screwed it between the roof trusses horizontally, then drilled a single 5/8" hole in the middle. Buy a 6" long 5/8 bolt and several nuts, washers and lock washers so it doesn't vibrate lose. Mine is in a corner also. This thing blows very, very hard, even on low.
Question:	can the oscillating feature be turned on and off
Answer:	The only hardware I needed purchase to mount this fan the wall was a lag bolt and a few washers. If you're going into concrete (like I did), you'll need an anchor.
Question:	How long is the mount bracket? Or how far down from the ceiling can I drop it
Answer:	The manufacturer makes t pretty clear this needs to be installed in a clean and dry location. Covered might be ok but definitely not exposed.

Product description

The Air King AS54 Advantage Exhaust Bath Fan features a stylish grill design that works with any home's decor. This exhaust fan has a high impact polycarbonate lens that allows for easy re-lamping and the fan and light can also be wired to operate separately. A 100-watt type A19 medium base incandescent bulbs (sold separately) can be used with this fan to provide added lighting for multi-functional use. With a speed setting operating at 50-CFM at 3.0-sones, the AS54 is suitable for bathrooms up to 50-square feet and other rooms up to 60-square feet. This fan's motor is suitable for continuous operation with low sound levels. This exhaust fan comes complete with an 4-inch round metal duct connection and a duct collar and damper. This exhaust fan is HVI-certified and UL listed for installation over a tub or shower on a GFCI circuit. The Air King AS54 Advantage Exhaust Bath Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now. Visit www.amazon.com/airking for more information on Air King and our extensive line of products.

From the Manufacturer

The Air King AS54 Advantage Exhaust Bath Fan is an economical way to provide ventilation at moderate sound levels without sacrificing style and function. This exhaust fan is ideal for smaller rooms, such as bathrooms, powder rooms and utility rooms. With a speed setting operating at 50-CFM at 3.0-Sones, the AS54 is suitable for bathrooms up to 50-square feet and other rooms up to 60-square feet. This exhaust fan comes complete with a back damper for quiet operation and a 4-inch duct collar for duct ventilation. The AS54 is simple to set up using the double thick keyhole mounting tabs for an easy installation process. This exhaust fan is UL listed for installation over a tub or shower on a GFCI circuit. The AS54 measures 7-1/4-inches by 7-1/4-inches by 4-3/4-inches and features a 23-gauge metal construction with a white finish. The Air King AS54 Advantage Exhaust Bath Fan comes with a 1-year limited warranty. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals - Air King has the perfect solution for you. Powerful motors that last for years and years are what Air King's Air Circulators have come to been know as and we are not stopping now.

• White exhaust fan provides ventilation at moderate sound levels
• Suitable for bathrooms up to 50-square feet and other rooms up to 60-square feet
• High impact polycarbonate lens allows for easy re-lamping
• Ideal for smaller rooms, such as bathrooms, powder rooms and utility rooms
• Comes with a 1-year limited warranty

User questions & answers

Question:	Does this model include a light
Answer:	Call the manufacturer is your best bet
Question:	does this have a normal plu that you can just plug into an outlet
Answer:	We did install for safety sake. Being that this unit vibrates whenever it is on, it would be a good idea. Don't want to have to fix the hole in someone's head......
Question:	Is the white plastic paintable
Answer:	If it rains you're screwed.
Question:	Dimensions of the cover
Answer:	It is way too loud for a bedroom. We installed in a huge garage -we have a t.v. in there and had to move it to a different spot in the garage because we couldn't hear the t.v. - It is great for our use but I don't think I would put in a bedroom unless you have a huge bedroom and don't mind the noise when you are trying to sleep.

Product description

The Air King Commercial Grade Oscillating Wall Mount Fans are ideal for workshops, health clubs, stores, classrooms, offices and other areas where there is limited floor or table space. Model 9018 is an 18-Inch, 5-blade oscillating Wall Mount Fan. The motor is 3-speed, 1/20 HP, 120V, 1 phase, permanently lubricated with a permanent split capacitor. Controls are front mounted - rotary and pull cord switch. Power cord is a white, 7 foot, 3 conductor. SPT-2-R type. Metal front grill with impact resistant plastic rear grill and chemical resistant polypropylene blade. Oscillation is 90 degrees and can be locked in non-oscillating position. CFM 1970, 1520, 1170 (High, Medium, Low) RPM 1000, 790, 590 (High, Medium, Low) Amps 1.1, .73, .54 (High, Medium, Low) Watts 114, 85, 63 (High, Medium, Low). ETL and OSHA compliant, Tested in accordance with AMCA 230.99. Shipping weight: 10.9 Pounds. Air King offers a full line of industrial grade and commercial grade air circulating fan solutions to meet almost any need you might have. Whether your need is in industrial settings such as manufacturing plants and warehouses or more commercial setting such as offices, schools or hospitals, Air King has the perfect solution for you. Quality, energy efficient and durable Air King products are always a great choice!

• 3-Speed, 1/20 HP, 120V, 1 phase, permanently lubricated, permanent split capacitor motor
• Constructed of metal front grill with impact resistant plastic rear grill and chemical resistant polypropylene blade
• Front mounted rotary and pull cord switch and White, 7-foot, 3-conductor, SPT-2-R type power cord
• 90 degree oscillation or can be locked in non-oscillating position
• ETL and OSHA compliant; Tested in accordance with AMCA standard 230. 99
• 1970 CFM

User questions & answers

Question:	Once the fan is hung high on a wall, can it then be moved down or does it only below "straight" across
Answer:	The provided bracket probably won't give you enough depth for a corner mounting. Where I installed 2 of these I moved them out about 3 feet from the corner and that worked well. Bracket is included and top hanger bolt, but you'll need your own hardware to affix to the wall structure.
Question:	Will it mount on the ceiling rather than the wall
Answer:	Yes. If you fasten the triangular fan mount to a vertical member such as an upright barn post (use 5/16" or 3/8" lag screws 5" long), the up-down axis is controlled by two large thumbscrews, one on either side of the semi-circular fan mount. The fan pivots left-right on a heavy bolt; to adjust the left-right direction of the fan, loosen this one bolt, swing the fan left or right, and re-tighten the bolt.
Question:	How loud
Answer:	Perfectly. This is what I use. It is loud, but moving a lot of air can be loud. it is awesome. I would buy again in a second. Nice fan. We have in a home gym that is maybe 15 X 15
Question:	How many watts or amps
Answer:	Hello! Yes this fan can be mounted to a ceiling or wall. The provided bracket is built for either type of installation. The only thing not provided is the three lag bolts to secure fan, but the instruction booklet tells you what size to buy. I know they were 2" long and think they were 5/16" diameter? Good luck and you will be glad you purchased this fan.

Product features

Air King 9018 Commercial Grade Oscillating Wall Mount Fan

• Grilles/Guards: Powder coated steel front grill with impact resistant plastic rear grill
• Motor: 3-speed, 1/20 HP, 120V, 1 phase, permanently lubricated,permanent split capacitor
• Fan Blade: Chemical resistant polypropylene blade
• Cord: White, 6', 3-conductor, SPT type
• Switch: Front mounted rotary and pull cord switch
• Oscillation: 90° or can be locked in non-oscillating position