7 best flood restoration services

Flood restoration services are crucial in the aftermath of water damage, such as flooding or leaks in homes. These services often involve a range of equipment and processes, including the use of dehumidifiers and considerations for heating, cooling, and air quality in the affected areas. Here's an overview:

  1. Dehumidifiers: Dehumidifiers play a critical role in flood restoration. They help remove excess moisture from the air and affected surfaces, preventing the growth of mold and mildew. High-capacity industrial dehumidifiers are typically used in these situations to accelerate the drying process.

  2. Drying Equipment: In addition to dehumidifiers, flood restoration services may utilize air movers and fans to promote air circulation and speed up the drying process. This helps prevent further damage to structures and belongings.

  3. Mold Remediation: After water damage, the risk of mold growth is high. Flood restoration services often include mold inspection and remediation to ensure that the affected area is safe and free from mold contamination.

  4. Heating and Cooling: Maintaining the right temperature in the affected area is crucial for effective drying and preventing mold growth. In some cases, restoration professionals may use heaters to increase the temperature, especially in colder seasons. Conversely, cooling may be necessary in hot and humid climates to prevent excessive moisture.

  5. Air Quality Management: Ensuring good indoor air quality is essential during flood restoration. Professionals may use air purifiers and filtration systems to remove contaminants and improve air quality in the affected space.

  6. Structural Assessment: Flood restoration services involve a thorough assessment of the structural integrity of the building. This includes inspecting walls, floors, ceilings, and other structural elements to determine the extent of damage and make necessary repairs.

  7. Content Restoration: Restoration services often include the cleaning and restoration of personal belongings and furnishings affected by water damage.This can involve cleaning, disinfecting, and deodorizing items as needed.

  8. Documentation: Detailed documentation of the restoration process is important for insurance claims and legal purposes. Restoration professionals typically provide photographs and reports to homeowners and insurance companies.

  9. Safety Measures: Flood restoration professionals prioritize safety, both for themselves and the homeowners. This includes following safety protocols for handling potentially contaminated water and materials.

  10. Preventative Measures: Part of flood restoration services may involve recommending preventative measures to reduce the risk of future water damage, such as improved drainage systems, sump pumps, or sealing vulnerable areas.

In conclusion, flood restoration services encompass a comprehensive approach to mitigating the damage caused by water intrusion. They involve the use of specialized equipment like dehumidifiers, air movers, and air quality management systems to restore the affected space and prevent long-term issues such as mold growth. These services are essential for homeowners dealing with water damage and should be carried out by experienced professionals.

Below you can find our editor's choice of the best flood restoration services on the market
  

ALORAIR Commercial Water Damage Restoration Dehumidifier 85 Pint Flood Repair

AlorAir

Based on 127 reviews Check latest price

Product description

ALORAIR Strom LGR Extreme 180PPD Commercial Dehumidifier is designed specifically for Water Damage Restoration. This is a very compact dehumidifier ever produced for drying restoration for easy transport and energy saving. Its stackable design cannot only save flood restorer more space but also make more numbers of the machine been transported to the destination for after-flood restoration tasks. As for the tough environment that flood disasters might have, It is the best choice for all urgent after-flood restoration tasks for dampness.Its wide applications include warehouse, shops, storage areas, industrial institutions, and garage applications etc.. It is rugged enough to endure severe collision and corrosion found in water damage restoration and construction.



Specifications:

Filter: MERV-8

Air flow: 210 CFM, 350 CMH

Sound Pressure Level: <58 dB(A)

Draining: Condensate Pump

Defrosting Control System: Auto Defrosting

Functioning Temperature Range: 33.8-104℉

Functioning Humidity Range: 35~90%

Shipping Dim (L×W×H): 24.4x16.1x20.5 in

Capacity:1800PPD (Saturation), 85 PPD at AHAM



Key Design Features:

Memory starting

Turn On/Off automatically

Auto Defrosting System

Rugged Condensate Pump (Developed only for Dehumidifier)

Rare earth alloy Tube Evaporator

Quick Access to Service

Smallest Size



Features:

Compressor Type: Rotary

Ducting Options √

Easy Handling √

Water Full Protection √

Automatic Humidistat Control √

Rare earth alloy Tube Evaporator √

Continuous Model √

Low Temperature √

Bypass Air sensor √



In the Box

Strom LGR Extreme Dehumidifier Yellow×1

Drainage pipe ×1

MERV-8 filter ×1

User Manual ×1

  • ▼ Super Features: This Commercial Dehumidifier Remove 180PPD at Saturation condition, Digital humidistat control, Timer, with condensate Pump, fits into small spaces, Multiple units can be moved on a standard hand truck.
  • ▼ Highly Efficient: This Water damage Restoration dehumidifier gets an operating temperature range of 33-105 degrees F, draws 5.62 amps on a 115V power supply for energy efficiency, the huge capacity of 85 PPD at AHAM while the rated power 640W.
  • ▼ Waterproof design: You can sink the unit in the water as the rubber strip makes the circuit board 100% sealed. It is a great feature when flood coming, especially excellent for cleaning and restoration water removal job.
  • ▼ 5 Years Warranty and Auto Defrosting: We believe in quality and after-sales-service, This Unit is equipped with a "Auto" defrosting system, which ensures a quick and efficient clearing of ice from the coil under a minimum operating temperature of 33.8℉.
  • ▼ Rare earth alloy Tube Evaporator: To avoid Freon leakage, a fatal flaw for a dehumidifier, AlorAir has introduced Rare earth alloy Tube Evaporator. This innovative feature extends the life of the coils by providing protection against, maintaining the coil’s heat transferability.

Product features

High Efficient, Rotational Moulded Body, Strong Handle, Easies to Transport.

  • Power: 115V, 60Hz
  • ETL Certified.

The ETL Certificated was verified on 16-Mar 2019 with Intertek Testing Laboratories certified.

  • Memory Starting.
  • Turn-ON/OFF Automatically.
  • Draining: Condensate Pump
  • Drain Height: 14.7 ft, Drain Pipe:19.6 ft
  • Low Maintenance & Easy Operation
  • Simply Plug-In, Select Settings
  • See GPP number on display board at a glance.

  • Smallest Size.
  • The quick connector to Cable/Hose.
  • Quick Access to Service
  • Ridged handle for easy transport.
  • Defrosting Control System: Auto Defrosting

Waterproof Design

Waterproof design: You can sink the unit in the water as the rubber strip makes the circuit board sealed. It is a great feature when flood coming.

Quickly replace the Washable MERV-8 Filter

Unplug the unit, slide out the MERV-8 Filter.

In addition, Buy a MERV-8 Fiter for Dehumidifier accessories Replacement

Easy Cord and Hose Storage

Extra Long Cord,19.6ft, three-prong power cord makes extension cords unnecessary.

For added convenience, the power cord and condensate hose stored on the side of the unit helps maximize your storage capacity.

Stackable

Its stackable design cannot only save flood restorer more space but also make numbers of the machine been transported to the destination for after-flood restoration tasks.

Easy Touch Button Control Pannel

Bright LED Display Indicates Display Tem. And humidity at both Inlet and outlet.

See GPP number on display board at a glance.

See operating settings at a glance.

Rare earth alloy Tube Evaporator

To avoid Freon leakage, a fatal flaw for a dehumidifier, AlorAir has introduced Rare earth alloy Tube Evaporator. This innovative feature extends the life of the coils by providing protection against, maintaining the coil’s heat transferability.

Built-in pump

With a 14.7’ lifting distance, the condensate pump gives you the freedom to drain anywhere.

Soleaire Super Monsoon SA-SM-1HP-GY Air Mover Blower Fan Carpet Dryers for Professional Carpet Cleaner Janitoral Floor Dryer Services 1 HP CE Certified Water Damage Flood Restoration Equipment, Gray

Soleaire

Based on 212 reviews Check latest price

Product description

Meet the Super Monsoon 1HP Air Mover by Soleaire, a product that performs at three different speeds to deliver powerful carpet blowing results. This heavy-duty, snail-style carpet dryer features a one-horsepower motor — an industry-leading volume of air that can make a huge difference as you take on water damage restoration work and other jobs. The unmatched air-moving ability of the Super Monsoon means time and money savings as you seek to deliver outstanding results at your job sites.

Specifications
  • Voltage: 115V 60Hz
  • Motor: 1 HP 4050
  • Speeds: 3
  • Amp Draw: 10 AMPS
  • Weight: 36 lbs
  • Size: 21” W x 19.5” L x 21” H
  • CE-ETL-US Certification
  • Power Cord Length: 25’
  • Warranty: 1 year / 5 year housing

  • HIGH VELOCITY - Perfect for the floor, carpet, hallway, or garage.
  • HEAVY-DUTY - perfectly suited to work in harsh commercial and industrial environments thanks to its roto-molded housing
  • MULTI-USE - Spills, paint, rugs, and other surface will dry in no time
  • RELIABLE - Durable long lasting roto molded housing that is ETL certified and listed reliable air mover, we stand by our product with a 5 year housing . Attached Cord 10 Ft 14 AWG
  • PORTABLE AND STACKABLE - This unit is stackable and perfect for use in crawl spaces, cabinets, closets, or any other cramped area you may need to dry

User questions & answers

Question: Would you consider this too powerful to use as a household fan for airflow
Answer: It just depends on how much air you want to move. It moves way more air than anything you will go buy at wal mart. I use mine to put a nice breeze through a 40x60 pole barn. So I would say yes it's a little much for the amount of air I would want to move in my house. Great fan though really moves alot.
Question: Appropriate to circulate air through a large room like garage or basement
Answer: It should be good for that. It moves air really well. Top speed is a little loud. Thankfully there are 3 speeds. I've bought 2 for my work area. 1 hp is very powerful. I will buy one for my home soon.
Question: Are the blades/cage metal or plastic
Answer: Can't really answer that right now. I will tell you that I purchased this unit on October 10th and I had in Operation on Oct.15 and I run it 8 hours a day, 7 days a week keeping my crawl space dry. No issues to this point...good unit!
Question: Does it come with a power cord? If so, how long is the cord
Answer: Yes it comes with a very strong 25 foot cord

Product features

Soleaire Super Monsoon 1HP Grey Air Mover

Meet the Super Monsoon 1HP Air Mover by Soleaire, a product that performs at three different speeds to deliver powerful carpet blowing results. This heavy-duty, snail-style carpet dryer features a one-horsepower motor — an industry-leading volume of air that can make a huge difference as you take on water damage restoration work and other jobs. The unmatched air-moving ability of the Super Monsoon means time and money savings as you seek to deliver outstanding results at your job sites.

3 Speed High Velocity Air Mover

The popular 3-Speed high velocity Soleaire Monsoon has just been upgraded to the Super Monsoon. This powerful carpet blower fan is a strong air mover in the snail style carpet dryer category. The heavy-duty 1 HP motor moves up massive amounts of air. This type of volume of air is considered high performance for the industry.

New and Improved

Stronger Rotomold Housing and upgraded motor brackets make the Super Monsoon the best in its class. With a redesigned fan blade and upgraded power switch you can be sure the Super Monsoon brings powerful air flow at your convenience.

AlorAir Storm LGR Extreme Commercial Water Damage Restoration Industrial LGR Dehumidifier for Flood Repair, Built-in Pump, cETL, 85 Pints, 13.4 Gallons a Day- Blue (4)

AlorAir

Based on 3 reviews Check latest price
  • ▼ Super Features: This Commercial Dehumidifier Remove 180 PPD at Saturation condition, Digital humidistat control, Timer, with condensate Pump, fits into small spaces, Multiple units can be moved on a standard hand truck.
  • ▼ Highly Efficient: This Water damage Restoration dehumidifier get operating temperature range of 33.8-104 degrees F, draws 5.62 amps on a 115V power supply for energy efficiency, huge capacity 85 PPD (13.4 gallons) at AHAM while the current draw is 5.62 amps, rated power 640W.
  • ▼ Waterproof design: You can sink the unit in the water as the rubber strip makes the circuit board sealed.
  • ▼ 5 Years Warranty and Auto Defrosting: We believe in quality and after-sales-service, This Unit is equipped with a "Hot Gas" defrosting system, which ensures a quick and efficient clearing of ice from the coil under a minimum operating temperature of 2℃.
  • ▼ Storm LGR Extreme industrial dehumidifier is leading the industry by introducing Rare earth alloy Tube Evaporator. This new feature will extend the life of the coils, maintain the coil’s heat transfer ability over the life of the coil.

Product features

What makes us great?

Storm LGR Extreme has an extremely driving water removal capacity which makes the machine the authorized one for restoration needs. It features great COP at 2.44 L/KWh, With a huge capacity of 85 PPD at AHAM RH, while the current draw is 5.62 amps. Installation flexibility makes the unit ideal for almost any application.

Max. Coverage Areas up to 2,300 Sq. Ft.

  • Smallest Size.
  • Quick connector to Cable/Hose.
  • Quick Access to Service
  • Ridged handle for easy transport.
  • Defrosting Control System: Auto Defrosting.

Ideal for large basements, warehouses, storage areas, office buildings, restaurants, bars, indoor pools, supermarkets, workshops, or wherever you need to extract moisture at a professional level.

Waterproof Design

Waterproof design: You can sink the unit in the water as the rubber strip makes the circuit board sealed. It is a great feature when flood coming.

Easy MERV-8 Filter Access

The high-dense MERV-8 Filter protects internal components from damage due to dust and other particles while ensuring maximum airflow throughout the operation, ensures efficient operation and long-term use. Please wash the filter once per 2-3 months.

Easy Cord and Hose Storage

Extra Long Cord,19.6ft and 19.6 ft long drain hose makes extension unnecessary, offering great convenience in installation.

Once your job is complete, the power cord and condensate hose stored on the side of the unit helps maximize your storage capacity and simple transport or neat storage.

Ultra Portability, Stackable Design

The compact design and rugged housing with indents cannot only save flood restorer more space but also make numbers of the machine been transported to the destination for after-flood restoration tasks.

Easy Operation and Intuitive Control Panel

  • Display Tem. and humidity at both Inlet and outlet.
  • See the GPP number on the display board at a glance.
  • See operating settings at a glance.

SET IT AND FORGET IT control automatically starts dehumidification when humidity above target is sensed. After auto or non-auto turn on, the dehumidifier will start or restart with the setting data before the outage, no need to reset the data.

Rare earth alloy Tube Evaporator

To avoid Freon leakage, a fatal flaw for a dehumidifier, AlorAir has introduced Rare earth alloy Tube Evaporator. This innovative feature extends the life of the coils by providing protection against, maintaining the coil’s heat transferability.

Internal Condensate Pump for Effortless Drainage

Removing large amounts of moisture can be tough, especially in commercial spaces. But to this restoration dehumidifier with a heavy-duty internal pump and a long drain hose, it won't be a problem anymore. During operation, this self-draining dehumidifier will automatically purge the collected condensation water out to a bucket, sink, out a window, or anywhere else that water can drain safely.

ALORAIR LGR Dehumidifier with Built-in Pump, for Water Damage Restoration, 5 Years Warranty, cETL Listed, Up to 180 PPD (Saturation), 85ppd at AHAM, Flood Repair

AlorAir

Based on 41 reviews Check latest price
  • ▼ Super Features: This Commercial Dehumidifier Remove 180 PPD at Saturation condition, Digital humidistat control, Timer, with condensate Pump, fits into small spaces, Multiple units can be moved on a standard hand truck.
  • ▼ Highly Efficient: This Water damage Restoration dehumidifier get operating temperature range of 33.8-104 degrees F, draws 5.62 amps on a 115V power supply for energy efficiency, huge capacity 85 PPD (13.4 gallons) at AHAM while the current draw is 5.62 amps, rated power 640W.
  • ▼ Waterproof design: You can sink the unit in the water as the rubber strip makes the circuit board sealed.
  • ▼ 5 Years Warranty and Auto Defrosting: We believe in quality and after-sales-service, This Unit is equipped with a "Auto" defrosting system, which ensures a quick and efficient clearing of ice from the coil under a minimum operating temperature of 33.8 ℉.
  • ▼ Storm LGR Extreme industrial dehumidifier is leading the industry by introducing rare earth alloy tube evaporator. This new feature will extend the life of the coils, maintain the coil’s heat transfer ability over the life of the coil.

User questions & answers

Question: How long is the hose? Can I get an extension
Answer: Product can be set at 55% humidity. You can run for a month as long as the pump is used and you have a place to drain into.
Question: Is this a good choice for permanent installation instead of disaster recovery
Answer: There are many factors that can affect the pump performance. The longer the hose is it creates more pressure on the pump and lowers the flow rate. But for short distances up to 20 ft I wouldn't be worried about tat. Smaller diameter hose than the port on the machine is worse than length. Ideally you want to use the same diameter as the port Vertical orientation is not good either and creates pressure drop. Avoid going too much vertical. Again few feet should be OK.
Question: Can this be set to continuous operation to maintain a consistent humidity like the lower cost humidifiers. Want to use instead of box store model
Answer: I just stuck the tube in the little opening and turned on the pump. Remember the pump won’t work until the the bucket is pretty full.
Question: what is the return policy
Answer: No, If you follow the instuctions, The pump is for up hill applications and is it's own system, no bucket involved. Use the small hose to connect to the pump outlet and press the pump button to activate. the larger hose is for gravity drain only, Again no bucket involved. Just leave in place.

Product features

High Efficient, Rotational Moulded Body, Strong Handle, Easies to Transport.

  • cETL Certified.(Verify by Intertek on 16- Mar-2019))
  • Memory Starting.
  • Turn ON/OFF Automatically.
  • Draining: Condensate Pump.
  • Drain Height: 14.7 ft, Drain Pipe:19.6 ft.
  • Low Maintenance & Easy Operation.
  • Simply Plug-In, Select Settings.
  • See GPP number on display board at a glance.

  • Smallest Size.
  • Quick connector to Cable/Hose.
  • Quick Access to Service
  • Ridged handle for easy transport.
  • Defrosting Control System: Auto Defrosting

Waterproof Design

Waterproof design: You can sink the unit in the water as the rubber strip makes the circuit board sealed. It is a great feature when flood coming.

Quickly replace the Washable MERV 8

Unplug the unit, slide out the MERV-8 Filter.

In addition, Buy a MERV-8 Filter for Dehumidifier accessories Replacement

Easy Cord and Hose Storage

For added convenience, the power cord and condensate hose stored on the side of the unit helps maximize your storage capacity.

Stackable

Its stackable design cannot only save flood restorer more space but also make numbers of the machine been transported to the destination for after-flood restoration tasks.

Easy Touch Button Control Pannel

Bright LED Display Indicates Display Tem. And humidity at both Inlet and outlet.

See GPP number on display board at a glance.

See operating settings at a glance.

Rare earth alloy Tube Evaporator

To avoid Freon leakage, a fatal flaw for a dehumidifier, AlorAir has introduced Rare earth alloy Tube Evaporator. This innovative feature extends the life of the coils by providing protection against, maintaining the coil’s heat transferability.

Built-in pump

With a 14.7’ lifting distance, the condensate pump gives you the freedom to drain anywhere.

COLZER 190 PPD Commercial Dehumidifier with Pump Large Capacity Rotational Molded Portable Industrial Dehumidifier for Efficient Water Damage Restoration, Flood Clean-Up, Moisture Removal, cETL Listed

COLZER

Based on 22 reviews Check latest price
  • ✦【Commercial-grade Dehumidifier】This commercial dehumidifier with 386 CFM airflow volume can remove up to 190 pints of moisture from the air per day at saturation (90°F, 90%) (93 PPD @ AHAM), ideal for flood & water damage restoration, carpet cleaning, fast drying in indoor gardening/greenhouse/pool/spa, construction areas, marine environments and large spaces up to 6,000 sq ft.
  • ✦【Dehumidifier with Pump】Featuring an internal heavy-duty condensate pump of 15 ft drain height connecting with a 17 ft wrinkle-free long drain hose (included), this self-draining industrial dehumidifier will automatically drain the condensation water to anywhere you want, meanwhile ensuring you are always on the top of operation without downtime.
  • ✦【Superior Durability】Roto-molded housing is much better on resisting dents, abrasion, and corrosion than metal housing while protecting the delicate interior components from any impact damage. This ETL listed water damage dehumidifier is also backed with a 2-year free warranty (5-year on housing) to ensure maximum lifespan that lasts several years.
  • ✦【Plug-and-go Operation】All you need to do is to plug it in, turn it on, no further manual adjustment is required. The LCD screen displays the humidity level and the temperature of both inlet and outlet as well as the job hours for better management of job site progress. The auto-restart on power failure and auto HGV defrost features allow less supervision.
  • ✦【Easy to Transport & Store】The large semi-pneumatic wheels and rigid handle make this large dehumidifier portable from job sites to job sites, even from downstairs to upstairs. The long PVC drain hose (17 ft) and power cord (25 ft), adding ultimate flexibility for installation, can be wrapped on the winders on the back, the handle is foldable and the rugged housing is stackable, saving valuable spaces for both storage and transportation.

User questions & answers

Question: Would this work well for an indoor pool room
Answer: It pumps on demand (low or no outlet pressure). At an outlet pressure of 45psi , it shuts off.
Question: Could this be ran in the house at night while you sleep how loud is it
Answer: It is not like the city water pressure if that’s what you’re asking. It will depend on the spray fitting you use on the end of your hose. It has decent pressure but again it is not city water pressure.
Question: How long is the drain hose, can it pump water out of basement
Answer: That depends on what you have prior to the pumps. How much flow,and how much pressure do you have before adding the pump. If you have no city provided water pressure then you will probably want a larger pump for the entire house!! If you are only using for a very small homestead then this would work in a pinch. It’s not designed to run an entire house,not even close.
Question: Any warranty and how can I access warranty service
Answer: My husband says it can. Hope this helps.

Product features

Tough Enough for Professionals, Simple Enough for Domestic Uses

COLZER TR160D offers the right solutions for any job without any complicated or confusing settings or unnecessary features.

Simply plug it in, and press the POWER button to turn it on, this automatic dehumidifier will automatically enter into work mode and work hard continuously without you worrying about it.

Internal Condensate Pump for Effortless Drainage

Removing large amounts of moisture can be tough, especially in commercial spaces. But to this restoration dehumidifier with a heavy-duty internal pump and a long drain hose, it won't be a problem anymore.

During operation, this self-draining dehumidifier will automatically purge the collected condensation water out to a bucket, sink, out a window, or anywhere else that water can drain safely.

✔ Drain Height: 15 ft

✔ Drain Hose Length: 17 ft

✔ Hose with Quick-fitting Connector

✔ Fast Access for Pump Maintenance

Rotomolded Housing - Ideal for Rugged Use for Years

If you’re looking for a unit that can withstand the rigors of the toughest conditions, you won't go wrong with this COLZER TR160D roto-molded dehumidifier.

COLZER TR160D is constructed with rugged rotomolded polyethylene housing which is much more durable than the metal housing of conventional commercial dehumidifiers.

The rugged roto-molded housing could reduce the impact of bumps or accidental drops during transportation, ensuring maximum lifespan.

The roto-molded housing is dent, scratch, chemicals and corrosion resistant, maintaining the original looking of your dehumidifier after years of use.

HAV Defrosting for Low-temp Operation

This commercial size dehumidifier is equipped with HGV defrosting system that delivers fast and efficient frost removal from the coils without experiencing stoppages that are common in other compressor dehumidifiers during the defrosting process, optimizing the dehumidification efficiency.

This commercial-grade dehumidifier with better defrost abilities is capable of removing water even in low-temperature environments as 33°F, being reliable solutions for restoration tasks.

Easy to Move, Simple to Store

Moving a large dehumidifier from job site to job site or storing equipment can be a real hassle. But, that is NOT for COLZER TR160D.

The semi-pneumatic wheels and rigid handlebar allow for easy maneuvering around corners, stairs, and furniture.

The stackable housing and collapsible handle save valuable space during transportation and storage.

The winder and strap on the back help to keep the long power cord and drain pipe neat and safe when not in use.

Reusable Filter for Easy Maintenance

This industrial size dehumidifier comes with a high-density filter to protect internal components from damage due to airborne dust, debris, and other particles, ensuring a long lifespan.

Meanwhile, this high-airflow air filter ensures maximum airflow (386 CFM) throughout the operation for optimal moisture removal results.

Besides, this air filter is easily accessible, vacuum-able, washable, and reusable, saving you the cost and hassle of the replacement filter.

ALORAIR 275 PPD Commercial Dehumidifier, Large Industrial SLGR 1400X dehumidifier with Pump,5 Years Warranty, for Job Sites Clean-Up, Flood, Damage Restoration-Moisture Removal Up to 17.5 Gallons/Day

AlorAir

Based on 4 reviews Check latest price
  • ✔【275 PPD Dehumidifier】: With large water removal capacity up to 275 Pints (34.37 Gallons) per day at saturation, 140 PPD (17.5 Gallons) per day at AHAM, In a space as large as 3,800 square feet, this heavy-duty dehumidifier can fit virtually every commercial and industrial need.
  • ✔【Industrial & Commercial Grade Dehumidifier】This high-efficiency dehumidifier operates at a high airflow rate of 440 CFM, ideal for Removing Damp and Moisture from Flood & Restoration, Carpet Cleaning, Basements/Cellars, Laundries, De-Flooding. Size for Up to 3,800 Sq.FT.
  • ✔【Easy Operation】: Quickly to internal service requested like Internal Cleaning, Pump service. This commercial dehumidifier features with automatic restart after power outages, auto defrost, continuous drainage (built-in pump) for effortless humidity control.
  • ✔【Easy Mobility, Dry anywhere】With large semi-pneumatic wheels and sturdy bar handle, this large industrial size dehumidifier is easy and safe to transport from job to job, and even from downstairs to upstairs.
  • ✔【5 Years Warranty, Robust Construction】We believe in quality and after-sales-service. This ETL listed dehumidifier is made of a stainless steel casing, ensuring long-term use and easy maintenance.

User questions & answers

Question: How long is the power supply cord
Answer: It is 20ft long.
Question: Purchased 2 dehumidifiers, haven’t been given a ship date. Any idea when they will ship
Answer: It shouldn't be longer than 2 weeks. Please call our number at 888-990-7469 to check your order.
Question: Is this shipped fed X ground or fed X air to Nebraska
Answer: We ship via UPS.
Question: Where’s the compressor made China? Evap coil made of steal or stainless steal? My outsides never rust just the coil ends
Answer: The unit and its parts are manufactured in China. The coil is copper.

Product features

What makes us great?

With large water removal capacity up to 275 Pints (43.3 Gallons) per day at saturation, 140 PPD (17.9 Gallons) per day at AHAM, In a space as large as 3,800 square feet, this heavy-duty dehumidifier can fit virtually every commercial and industrial need.

Max. Coverage Areas up to 3,800 Sq. Ft.

Ideal for large basements, warehouses, storage areas, office buildings, restaurants, bars, indoor pools, supermarkets, workshops, or wherever you need to extract moisture at a professional level.

Microchannel Condenser Technology

The use of microchannel condenser technology can improve the 50% dispersion effect of condenser, 30% heat exchange area and 50% refrigerant quantity. When the SLGR microchannel is combined, the efficiency of the dehumidifier can be increased by 30~50%.

Easy Touch Button Control Panel

Simple to set up: Power Key, Arrow Buttons, Continuous Mode, Manual Drain Button, Pump Trouble Warning.

SET IT AND FORGET IT control automatically starts dehumidification when humidity above target is sensed. After auto or non-auto turn on, the dehumidifier will start or restart with the setting data before the outage, no need to reset the data.

Heavy-duty condensate pump

With a 14.7’lifting distance, the condensate pump gives you the freedom to drain anywhere.

Drain Height: 14.7 ft

Drain Pipe:19.6 ft.

MERV-1 Filter, MERV-10 Filter and cold catalyst

The standard of dehumidifier is equipped with MERV-1 Filter and MERV-10 Filter. The high-dense MERV-10 Filter protects internal components from damage due to dust and other particles, ensures efficient operation and long term use. Please wash the filter once per 2-3 months.

Auto Error Detection

If any problems occur during the unit running, the display panel will show error codes so you can get troubleshooting tips to address problems.

Intelligent & Continuous Operations

Automatic restart after power outages, auto defrost, drainage with pump, plug and play that doesn't require your constant attention, being an excellent choice for commercial, industrial and residential areas.

Precise Humidity Maintenance

Excess moisture is the potential to lead to structural damage and costly repairs.ALORAIR Sentinel SLGR 1400X allows you to set any target humidity level between 35% and 95%. According to your needs, and then maintains the desired humidity to keep your home or workshop in good condition.

Disaster Restoration

It's crucial to dehumidification your place as fast as possible to prevent damage to furniture, floors, carpets, and walls after floods, leaks, or burst pipes. Wherever you need to extract moisture at a professional level.

High-speed Dehumidification

High humidity levels may lead to delays, corrosion and coating failures in areas where you plan to apply a protective coating. AlorAir industrial dehumidifier helps to create an ideal environment for preparing the respective surfaces and apply the coating and allows the coating to cure properly.

ALORAIR LGR Industrial Commercial Dehumidifier Auto Shut Off with Pump, 5 Years Warranty, Compact, APP Control, cETL Listed, up to 180 PPD (Saturation), for Garages, and Flood Restoration, Blue

AlorAir

Based on 11 reviews Check latest price
  • ✔【App Control & Dry anywhere】: MONITOR THE RESTORATION PROCESS ON THE GO! Our free AlorAir DryEasy mobile app is included with the unit upon purchase. Commercial Dehumidifier, Moisture Removal Capacity 180 PPD at Saturation condition and 85 Pint at AHAM only with 5.5A, Super-Efficient System, fits into small spaces, Secure, compact stacking – transport multiple units on a hand truck.
  • ✔【5 Years Warranty】: Rugged Polyethylene Housing resists dents and scratches. We believe in quality and after-sales-service, It is sure to last long and still keep its shape look.
  • ✔【COMMERCIAL, INDUSTRIAL, and PERSONALl USE】: Ideal for Carpet Cleaning, Basements/Cellars, Laundries, De-Flooding, Offices, Laboratories, Tradesmen, Garages.
  • ✔【Design with humanized】: Onboard storage for 19.6 ft power cord and 19.6 ft condensate hose. Convenient storage for the power cord and drain hose. MERV-8. APP Control, Automatic Digital Humidistat Control, Memory Starting, Timer, Automatic Digital Humidistat Control. Industrial Dehumidifier with Condensate Pump.
  • ✔【Memory Starting, Auto Shut Off】: Comes back after a power failure, no need to turn on manually. The clear LCD display, it has no complicated function button, Temperature, and Humidity Display at Both Inlet and Outlet Side.

Product features

Storm LGR Extreme 180 PPD (28.3 gallons) Commercial Dehumidifier with APP Control.

ALORAIR Storm LGR Extreme 180PPD Commercial Dehumidifier is designed specifically for Flood Restoration. This is a very compact dehumidifier ever produced for dehumidification restoration for easy transport and energy saving. Its stackable design cannot only save flood restorer more space but also make numbers of the machine been transported to the destination for after-flood restoration tasks.

Waterproof Design

Waterproof design: You can sink the unit in the water as the rubber strip makes the circuit board sealed. It is a great feature when flood coming.

Quickly replace the Washable MERV-8 Filter

Unplug the unit, slide out the MERV-8 Filter.

In addition, Buy a MERV-8 Filter for Dehumidifier accessories Replacement

Easy Cord and Hose Storage

Extra Long Cord,19.6ft, three-prong power cord makes extension cords unnecessary.

For added convenience, the power cord and condensate hose stored on the side of the unit helps maximize your storage capacity.

Stackable

Its stackable design cannot only save flood restorer more space but also make numbers of the machine been transported to the destination for after-flood restoration tasks.

Easy Touch Button Control Pannel

Bright LED Display Indicates Display Tem. And humidity at both Inlet and outlet.

See GPP number on display board at a glance.

See operating settings at a glance.

Rare earth alloy Tube Evaporator

To avoid Freon leakage, a fatal flaw for a dehumidifier, AlorAir has introduced Rare earth alloy Tube Evaporator. This innovative feature extends the life of the coils by providing protection against, maintaining the coil’s heat transferability.

Commercial dehumidifier with Built-in pump

With a 14.7’ lifting distance, the condensate pump gives you the freedom to drain anywhere.

Latest Reviews

View all