10 best sim pedals

Product description

Logitech G Pro Flight Rudder Pedals add another layer of realistic control to your flight simulation setup. Control the rudder and toe brakes of your aircraft with your feet – just like actual pilots. These self-centering pedals with adjustable damping are a perfect complement to the Saitek Pro Flight Yoke. The Rudder Pedals' fluid motion enables accurate command over your aircraft, while differential braking provides independent control of the left and right toe brakes. The foot rests adjust to accommodate a wide range of sizes and include non-slip materials to help keep the pedals on the floor during virtual flight.

• Smooth and accurate self-centering rudder pedals add another layer of realistic control to your flight simulation setup
• Whether you prefer the lighter response of a small aircraft or the more robust feel of a heavy jet, a simple twist of the Adjustable Tension Dial will have you flying your way.
• Differential Toe Brakes deliver the full control you need when bringing your aircraft up to its stand on the runway

User questions & answers

Question:	Does work with flight simulators
Answer:	Yes, all you need to do is to go on to Logitech's website to grab the correct drivers, and/or to check if it works with your simulator
Question:	How does this connect to the computer? ie. What is the connector
Answer:	It is connected via a usb connector straight to the computer.
Question:	Can these be used as gas and brake for racing games
Answer:	It can. Don’t listen to the other comment about pushing and pulling or pushing. That is for rudder which cars don’t have. You can map right toe brake to acceleration and the left toe brake to brake. It’s possible you could map the rudder feature to provide directional movement of a car like a plane on the ground but that will be weird at high speeds.
Question:	Is i compatible with windows
Answer:	Yes, it is compatible with Windows 10. No problem running it on this OS.

Product features

Realistic. Smooth. Accurate.

Add a critical facet of the pilot experience to your flight simulation setup. Control the rudder and toe brakes of your aircraft with your feet—just like the real deal. These self-centering pedals with adjustable damping are a perfect complement to the Logitech G Flight Yoke System.

Product description

The definitive sim racing wheel for PlayStation 5, PlayStation 4 and PlayStation 3. Driving Force is designed for the latest racing game titles for your PlayStation 5, PlayStation 4 or PlayStation 3 console. Add Driving Force to your controller selection and you may never want to race with a regular controller again. With dual motor force feedback, on wheel controls and responsive pedals, G29 makes racing feel like the real deal.

• The definitive sim racing wheel for PlayStation 5, PlayStation 4 & PlayStation 3: Realistic steering and pedal action for the latest racing titles
• Built to last: Durable solid steel ball bearings, stainless steel shifter and pedals and hand stitched leather wheel grip
• Dual motor force feedback: Realistically simulates the racing experience with smooth, quiet helical gearing
• Easy access game controls: On wheel D pad, console buttons, paddle shifters and LED indicator lights
• Responsive floor pedal unit: Accelerate, brake and change gears with the feel of an actual car. Pedal piston sleeves: Polyoxymethylene thermoplastic (POM)
• G29 requirements: PlayStstion 5, PlayStation 4 or 3, Powered USB port or Windows 10, 8.1, Windows 8 or Windows 7, mac OS 10.10+

User questions & answers

Question:	Is this a glorified driving force GT
Answer:	Yes most drills are adjustable.
Question:	does this wheel work with Windows 10 on pc
Answer:	You will probably drill out the peg holding the leg to the table. It would be a cool approach if worked. PS. There are solid drill extensions available that may have a greater chance of success.. I though would see the torque and rotation as being destructive to any leg less than 3" diameter..
Question:	Will it work with this amazing shifter? http://amzn.to/2kKBi9e
Answer:	No idea what a nail will do to the path, I make sure as best I can not to hit one. Other boring bits dulled instantly when I hit a large nail where the path cannot be changed
Question:	Do I have to wear a helmet while using as depicted in the cartoon advert above or is it safe to use while letting the wind flow through my hair
Answer:	On the 9/16 diameter bit, the shank is round but there are 3 flats on the end that goes in the drill chuck to prevent slippage.

Product features

G29 Driving Force Racing Wheel

Experience your PlayStation 5, PlayStation 4 and select PC racing titles like never before with the advanced driving simulation and realism of G29 Driving Force Racing Wheel and pedals.

Responsive, Adjustable Floor Pedal Unit

Throttle, pressure-sensitive brake, and clutch pedals let you accelerate, brake and change gears with the feel of an actual car. For finer control, reposition the pedal faces for easy heel-toe maneuvers. Rubber feet and a retractable carpet grip system keep your pedals right where you put them.

Product description

GT Omega Steering Wheel Stand:

GT Omega presents a great solution for the Sim Racing Enthusiasts for mounting the steering wheel, pedals and gear shifter onto an ergonomic racing position whilst gaming. Now you can enjoy Racing without compromising the space in your living room or bedroom; this stand folds up fast and reduces to a surprisingly small size to easily fits into limited floor space and storage room.

GT Omega Racing Wheel Stand has enough adjustment to cover almost any applicable situation, from driving with an office chair to dining table chairs and even a sofa! Moreover, the stand can be set up in less than 30 seconds and you can start racing at any time in the day or night and no extra technical knowledge is required to set up this gaming set. Its twin spar design will greater rigidity, and steel box tubing will keep the stand very solid and will last many years of hard use.

Features:

• Foldable and Easy to Store Anywhere
• High-quality anti-sliding rubber feet
• Gear Shifter Mountable on Both the Sides - Left & Right
• Compatible with Logitech, Thrustmaster & Fanatec Sim Racing Set
• Suitable for wheels that can be clamped to tables

Product Specifications:

• Dimensions: 61cm Length x 45cm Width
• Weight: 12kg
• The height of the Wheel stand can be adjusted from 58cm up to 77cm.

Pre Drilled for:

• Logitech G923, G923, G920, G29, G27, G25
• Thrustmaster T500RS, T300RS, TX Ferrari F458
• Fanatec Clubsport

What Comes In The Box:

• GT Omega Wheel Stand
• 6 x m6 bolts to hard mount your wheel and pedals
• Gear shifter mount V2

Disclaimer:

This sale is for the GT Omega Steering wheel stand and Gear mount v2 only. The racing wheel, pedal and shifter are not included in this sale.

• COMPATIBILITY: This is a universally designed steering wheel stand which fits all Logitech, Fanatec & Thrustmaster series racing wheels, pedals and gear shifter mounts available on the market. Specially designed for the Logitech G923, G920, G29, G27, G25, Thrustmaster T500RS, T300RS, TX Ferrari F458 and Fanatec Clubsport.
• FULLY ADJUSTABLE: The GT Omega Steering Wheel stand has a wide range of height adjustment and angle adjustment. You can finely tune your wheel and pedal to any ergonomic position you need, you can also mount the gear shifter on both the left and right hand side.
• FOLDABLE & COMPACT: While playing, you need not to compromise the space in your gaming room. Even after enjoying the game, you can easily fold this stand with your equipment attached and store wherever suits. The compact design allows you to carry it anywhere.
• STURDY & SOLID AS A ROCK: The GT Omega steering wheel stand features a twin spar design. This style offers greater rigidity and improved access to the pedals with no middle bar to obstruct you. Perfect for heel and toe driving. Constructed from steel box tubing, the unit is very solid and will last for years to come.
• PLAY WITH EASE: The wheel stand is designed to enhance your simulation gaming experience while playing sim racing games in any situation. Being sturdy and rigid, this stand will ensure safety to your gaming electronics.

User questions & answers

Question:	hi , i have logitech g29 wheel and pedal and shifter so can i use this stand or just this for g920 ? please reply
Answer:	The game plays better with a DVR player. The game plays out a scene and pauses itself. The clues are found by wearing special glasses which would be easier on a bigger screen. You should be able to move to a specific scene play by using the arrow keys
Question:	This is the Classic steering wheel stand and not the Apex one, right
Answer:	I haven't found any, that would have been a great idea. The 10 cases get old pretty quickly, and the general case doesn't have the same feel.
Question:	Does it come with mounting hardware
Answer:	Hi friend, Thank you for your inquiry. We call the game players are detectives, because players need to find the right patterns and mark it as soon as possible. The game tests the player's short-term memory and hand-eye coordination. So it can be called a ‘Detective Looking Chart". VATOS TEAM
Question:	Is this compatible with the G
Answer:	You use the colored pieces and put the ring over them.

Product features

For a Realistic, Incredible Racing Experience:

The GT Omega Wheel Stand is the ideal solution for racing in front of the TV on your PlayStation, PC or Xbox.

The unique design of our racing wheel stand allows you to mount your pedals, shifter and wheel in an ergonomic and realistic racing position while gaming.

Use it once, and you will never want to race with a regular controller again. The GT Omega Wheel Stand makes racing feel like the real deal. Upgrade your stand to a cockpit to make your racing experience complete.

Durable Construction:

The GT Omega Racing Wheel Stand is all about quality, stability and durability. Engineered with steel box tubing, it will survive years of heavy use. The twin spar design offers excellent rigidity and improves access to pedals. Perfect for heel and toe driving!

Fully Adjustable:

Whether you are driving in an office chair, dining chair or even sofa, our stand can be used comfortably in any situation. The adjustable height and tilt feature ensures anyone can find their perfect driving position. Gear shifters can mount on left or right side to suit your preference.

Fold & Store In 30 Seconds Or Less:

As our wheel stand is intended for indoor use we have prioritized a compact and easy to store design. The stand can be folded and packed away when not in use. It folds super-fast and reduces to a surprisingly small size without having to remove your equipment, making it the perfect option for gamers who have limited storage space.

Product description

• High-precision acceleration and clutch: with magnetic sensors (H.E.A.R.To technology - Hall Effect accurate technology).

• Kits of 6 springs included, allowing a multitude of quick adjustments
• In height (3 possible positions for the Accelerator pedal/ 2 possible positions for the brake and clutch pedal)
• Advanced calibration software available
• Structure, arms & pallets of the 3 pedals in metal

User questions & answers

Question:	When this padels will be available again
Answer:	Not sure. I placed my order and it said they wouldnt be shipped until mid August and then received an e mail and order was placed and received quickly. They are hard to get for whatever reason, maybe thrustmaster supply, or supply chain.
Question:	Are these plug and play since i dont have a computer
Answer:	These are plug and play
Question:	Where can I order the cockpit adapter and rubber grips
Answer:	They will be available at the launch of the product from Amazon.com
Question:	Is it compatible with fanatec servo
Answer:	No you will not be able to plug these pedals directly into a fanatec wheel base. If you are using a PC though then you can plug them both into the computer separately over USB and that will work fine.

Product features

MAGNETIC TECHNOLOGY

The H.E.A.R.T (HallEffect AccuRate Technology) system — contactless technology without any potentiometers — ensures an unlimited lifespan and optimal accuracy in racing sessions: up to 16-bit resolution, representing 65,536 values per pedal.

UP TO 220 LB / 100 KG OF PRESSURE ON THE LOAD CELL FORCE SENSOR

The brake pedal in the T-LCM Pedals adjusts to your gaming intensity and driving style. You’ll get the perfect amount of braking power according to the force applied on the brake pedal.

ADJUSTABLE MECHANICAL BRAKE FORCE

The included set of 6 springs allows for a multitude of quick adjustments, allowing you to customize the feel on the brake pedal to your liking.

Adjust the pressure force for the best fit with your racing setup (desk or table, Wheel Stand Pro, GT cockpit, F1 cockpit, etc.).

100% METAL MATERIALS

Mounted on a stable, sturdy structure designed with the most experienced racers in mind, the 100% metal pedal heads, attached to 100% metal pedal arms, ensure a good grip in order to optimize the feeling of control while racing.

INDEPENDENTLY-ADJUSTABLE PEDALS

The positions of the 3 pedals are adjustable in terms of height, inclination and spacing.

The calibration software also lets you electronically adjust the brake force, along with the dead zones for all 3 pedals.

REINFORCED STABILITY

The large, textured foot reststops your feet from sliding, and prevents inadvertent slips.

Weighing in at more than 11 lb / 5 kg, the heavy-duty pedal set provides stability that you can always depend on.

Product description

Pedals - gray

• 3 Axis of Control: X & Y axis for left and right toe brake control and Z axis for self centering sliding mechanism for rudder control
• Realistic heel-toe differential brake control and Large, sturdy base with 7 foot USB cable
• Locking rudder axis for gas/brake emulation for racing games. It is only compatible with CH USB devices
• Plug and Play driverless USB installation for both PC and Macintosh
• Compatible with Windows 98, 2000, XP, Vista, 7, 8, 10 and Mac OSX

User questions & answers

Question:	Could this be adapted to be used in racing games also
Answer:	I googled the question and found many forums of users using both the CH yoke and pedals for racing games. So yes they can be use for racing. - Dave
Question:	Are the pedals spring loaded to return to a center
Answer:	Yes, they are spring loaded to come to center.
Question:	Wiil these work in 2019 for Windows 10 64bit
Answer:	The drivers should install when the pedals are plugged in the USB port. The pedals worked with Win 7 64 Bit so they probably will work with Win 10 64 Bit.
Question:	does anyone use them for Star Citizen, and if so how would you rate their preference
Answer:	I use them for both Star Citizen and Elite:Dangerous. I really like them. Sturdy, responsive and a good firm center detent that you can feel easily. They do work well with shoes on, but to me are more comfortable with sock on.

Product features

Solid Construction for Years of Enjoyment

Designed in the U.S., the Pro Pedals use much of the same high end materials that are used in their industrial controllers. The Pro Pedals are nearly indestructible with military-grade plastic and solid construction, and will outlive the 2 year warranty.

Installs in Minutes

Adding the Pro Pedals to your system is a snap--simply connect the pedals to an available USB port and you're ready to go. There are no drivers to download, and the Pro Pedals are compatible with Windows 98, 2000, XP, Vista, 7, 8, 10 and Mac OSX. A seven-foot USB cable makes it easy to position the pedals where they''re the most comfortable and accessible.

The Control Manager software is compatible only with Windows operating systems: Windows 98, 2000, XP, Vista, 7, 8, 10, and with CH Products USB devices only.

Advanced Programming Software

To get the most out of your controller, CH offers the CH Control Manager programming software. The CH Control Manager advanced programming software is Windows compatible, (latest version available at our official site as a free download) and works with all CH USB peripherals, including the Eclipse Yoke, Fighterstick, and Throttle Quadrant. This optional programming software allows for total control over your CH USB devices, letting you program macros, assign buttons, and much more.

Product description

Logitech G and GIANTS Software teamed up to create this bumper crop of immersive gear made to enhance the excitement of reaping the rewards of your virtual farm. The Farm Sim bundle is the latest member of the impressive stable of specialized gear. Standard keyboard controls or wheels designed for a totally different genre of games may get the job done, but our equipment does the job right. Care for your farm with these realistic tools to gain a deep-rooted sense of immersion and enjoyment, all while driving vehicles and operating attachments with a finer degree of control.

• Updated with engineering enhancements that address feedback from the community
• 900-degree rotation steering wheel offers the realistic rate of rotation for a tractor steering wheel
• Integrated Dual Analog Sticks enables control of your farmer when walking between vehicles
• Side Panel Loader Control Stick offers flexible control of the attachments to any piece of farming equipment in the game
• Set and Forget Cruise Control Speed Dial and 37 programmable buttons you need in order to control everything on your farm

User questions & answers

Question:	Will it work on Mac
Answer:	Its not console specific so depending on what wheel/pedal set up you have it may or may not work
Question:	Will this work on Xbox
Answer:	It depends. If you are asking about straight bolt on solutions, then the answer is No. But if you are willing to do some work, then Yes. I used 2x4s to raise the seat, but it is not a novice solution. The sliding mechanism will not work with 2x4s without modifications. You can look into the kit for Playseat for raising the seat up. Also, you will have to consider, that a height of pedal box has to change too. PS. I did both with 2x4s for the seat and 2x8s for pedal box
Question:	Is this the same as the saitek steering wheel and pedals
Answer:	No it does not, I use a thrust master gt wheel mounts perfect to this stand. The thtustmaster kit comes with steering wheel and pedals. Shifter is seperate but u can use the padel shifter on the wheel....good luck
Question:	how high/low is the quality? will it last for a couple of years of regular use
Answer:	Yes, there are mounting points along both the left and right seat frame sections.

Product features

Reap the Rewards of Complete Farm Management

Get your hands dirty with an impressive stable of specialized farm simulation gear: 900-degree wheel, rugged pedals, and a side panel for realistic immersion and enjoyment. In partnership with GIANTS Software and the Farm Sim community (That’s you), we amplified the thrill of cultivating land, nurturing livestock, and selling goods.

Tech Specs

System Requirements: Windows 10, Windows 8.1, Windows 7, MAC OSX 10.10, 1-USB 2.0 Port

Game Compatibility: Works with most major farm simulation software and games

Product Contents: Heavy equipment wheel with 6.6ft/2m USB connector cable, Gas and brake pedal set with 6ft/1.8m USB connector cable, Side Panel Control Deck with 6.6ft/2m USB connector cable

Product description

Pendul_r: a revolutionary rudder mechanism the tpr features ThrustMaster exclusive pendul_r technology: a unique, Suspended mechanism ensuring smooth and fluid movements. In conjunction with the magnetic sensors, this provides perfect precision, even for minor adjustments.

• The tpr features ThrustMaster pendul_r Technology: a unique, Suspended mechanism ensuring smooth and fluid movements.
• The tpr also features ThrustMaster H.E.A.R.To HallEffect accurate Technology for ultra-precise, frictionless action that won't change over time.
• The positions of the tpr's spring can be adjusted, allowing users to adjust the resistance according to their preferences (two spring are included).

User questions & answers

Question:	Will these pedals fit in a VolairSim pit
Answer:	I would suggest reaching out to VolairSim to make sure
Question:	How far apart are the pedals? Also would they be problematic for large feet
Answer:	WIth all of the adjustments available, you should be able to get a comfortable setup. I would suggest a pedestal under the base that might raise the actual pedal height if you really have a height issue. I am including a link that you can scroll down in to get the dimensions of the actual unit. https://arstechnica.com/gaming/2018/09/thrustmaster-tpr-is-the-king-of-mass-market-flight-sim-pedals/ Hop this helps
Question:	Looks like the Pedials and some of the other items are plastic. What is and isnt made of injected plastic
Answer:	Hey there! I'm one of the somewhat-recent buyers of these TPR pedals and I can confirm that most of the components of the TPR pedals are aluminum. Had to do a tap test to be sure. The only parts that appear to be remotely plastic are perhaps the covers of the spring-loaded sensors that measure brake input and a few of the ball-jointed connections but even those seem to have metal inside them. These are serious pedals. Oh, one more thing. If you have any back problems or otherwise have trouble lifting moderately heavy objects, be warned that the TPR pedals do weigh quite a bit even with the aluminum parts. I hope this answers your question.
Question:	How come this costs $50 more than the msrp and everyone else
Answer:	Actually you can get it for $469 on Dell dot com with free shipping.

Product features

PENDUL_R: A revolutionary rudder mechanism

The TPR features Thrustmaster’s exclusive PENDUL_R technology: a unique, suspended mechanism ensuring smooth and fluid movements. In conjunction with the magnetic sensors, this provides perfect precision, even for minor adjustments.

H.E.A.R.T. HallEffect AccuRate Technology: Unrivaled precision

In order to maximize performance with unrivaled precision, the TPR also features H.E.A.R.T. HallEffect AccuRate Technology (U.S. patent US08471815) with 3D Hall effect magnetic sensors, providing 16-bit resolution (16,000 x 16,000 values) on 3 axes: rudder, left differential brake, and right differential brake (65,536 values on each axis, 0.005° of precision). What’s more, the magnets ensure ultra-precise, frictionless action that won’t change over time.

T.A.R.G.E.T. programming software

Thrustmaster Advanced pRogramming Graphical EdiTor software: combine the TPR with other Thrustmaster devices so that they’re recognized as a single USB device, and load or create specific profiles for each game.

Adjustable and versatile

The positions of the TPR’s springs can be adjusted, allowing users to adjust the resistance according to their preferences (two springs are included). The pedals can also be adjusted into five positions, at angles between 35° and 75°.

The TPR can be used underneath a desk or in a flight simulation cockpit. It is compatible with all types of flight simulation games: military or civil flight, for solo flight or formation flight.

• Analog RAT-Style Overdrive/Distortion and BigMuff-Style Fuzz Tones
• 3 Modulations w/ TAP TEMPO: Chorus, Phaser, Tremolo
• 3 Delays w/ TAP TEMPO: Analog, Tape, Reverse
• 3 Reverbs w/ TRAIL Function: Room, Hall, Plate
• Headphones Jack with CAB SIM; Built-in TUNER; 9V Center Negative Regular Pedal Power Supply (Adapter included)

User questions & answers

Question:	Does this pedal work for bass
Answer:	Thanks for the interest and for sure it will work for Bass. Some settings may come across sonically different with the lower registers of Bass, but creativity is the point and you would certainly have that with using this one as part of a Bass rig signal chain.
Question:	Any else experience intermittent power loss of the unit? I do, frequently
Answer:	I have not had this issue, maybe your 9 volt power plug is bad? Try another one if you have one or try another outlet for power?
Question:	Hi!! Can we combine Delay, chorus and phaser in yhe mean time
Answer:	You can have modulation and delay at the same time, yes. Chorus OR phaser, though; Not both, it's a three-way switch.
Question:	Will this make people like me more
Answer:	No, but it does have some decent distortion and reverb tones.

Product description

GT Omega Steering Wheel Stand for TMX 150:

GT Omega presents a great solution for the Sim Racing Enthusiasts for mounting the steering wheel, pedals and gear shifter onto an ergonomic racing position whilst gaming. Now you can enjoy Racing without compromising the space in your living room or bedroom; this stand folds up fast and reduces to a surprisingly small size to easily fits into limited floor space and storage room.

GT Omega Racing Wheel Stand has enough adjustment to cover almost any applicable situation, from driving with an office chair to dining table chairs and even a sofa! Moreover, the stand can be set up in less than 30 seconds and you can start racing at any time in the day or night and no extra technical knowledge is required to set up this gaming set as 6 x m6 bolts are provided to hard mount your wheel and pedals. Its twin spar design will greater rigidity, and steel box tubing will keep the stand very solid and will last many years of hard use.

Features:

• Foldable and Easy to Store Anywhere
• Angle Adjustable
• Gear Shifter Mountable on Both the Sides - Left & Right
• Compatible with Logitech, Thrustmaster & Fanatec Sim Racing Set

Product Specifications:

• Dimensions: 61cm Length x 45cm Width
• Weight: 12kg
• The height of the Wheel stand can be adjusted from 58cm up to 77cm.

Pre Drilled for:

• Thrustmaster TX, T500RS, T300RS
• Ferrari 458 Italia
• Logitech G25, G27, G29, G920, G923
• Fanatec Clubsport

What Comes In The Box:

• GT Omega Wheel Stand
• 6 x m6 bolts to hard mount your wheel and pedals

Disclaimer:

This sale is for the GT Omega Steering wheel stand only. The racing wheel, pedal, shifter and gear mount are not included in this sale.

• COMPATIBILITY: This is a universally designed steering wheel stand that fits all Logitech, Fanatec & Thrustmaster series racing wheels, pedals and gear shifter mounts set available in the market. Specially designed for Thrustmaster T150, TX, T500RS, T300RS, Ferrari F458 Italia, Logitech G923, G920, G29, G27 G25 and Fanatec.
• FULLY ADJUSTABLE: The GT Omega Steering Wheel stand has a wide range of height adjustment and angle adjustment. You can finely tune your wheel and pedal to any ergonomic position you need, you can also mount the gear shifter on both the left and right hand side.
• FOLDABLE & COMPACT: While playing, you need not to compromise the space in your gaming room. Even after enjoying the game, you can easily fold this stand with your equipment attached and store wherever suits. The compact design allows you to carry it anywhere.
• STURDY & SOLID AS A ROCK: The GT Omega steering wheel stand features a twin spar design. This style offers greater rigidity and improved access to the pedals with no middle bar to obstruct you. Perfect for heel and toe driving. Constructed from steel box tubing, the unit is very solid and will last for years to come.
• PLAY WITH EASE: The wheel stand is designed to enhance your simulation gaming experience while playing sim racing games in any situation. Being sturdy and rigid, this stand will ensure safety to your gaming electronics.

User questions & answers

Question:	Has anyone tried this with the thrustmaster tgt
Answer:	Hard plastic with fitted foam. Sorry - we will update the picture... Thank You.
Question:	Can I mount a handbrake and shifter on the same side? What handbrake would be best
Answer:	China. I have four Fowler calipers and a few of other brands. Quality is good accuracy is extremely good. Would not hesitate tp purchase another one!
Question:	It’s compatible whit thrumaster tmx
Answer:	Salt water systems actually produce chlorine through ionizing NaCl, sodium chloride or salt. This process results in chlorine as the primary detergent agent for cleaning pool water with the byproduct being sodium. So, yes any water testing kit that tests for chlorine can be used.
Question:	just want to know if the 3 pedals will fit
Answer:	I don't remember receiving an instruction manual with this kit. I used this very little and switched to a Taylor testing kit. I test for free chlorine, combined chlorine, pH, TA, Calcium hardness and cyanuric acid levels. I highly recommend the Taylor test kit for the most accurate test results and optimum pool chemistry balance. Hope this helps.

Product features

For a Realistic, Incredible Racing Experience:

The GT Omega Wheel Stand is the ideal solution for racing in front of the TV on your PlayStation, PC or Xbox.

The unique design of our racing wheel stand allows you to mount your pedals, shifter and wheel in an ergonomic and realistic racing position while gaming.

Use it once, and you will never want to race with a regular controller again. The GT Omega Wheel Stand makes racing feel like the real deal. Upgrade your stand to a cockpit to make your racing experience complete.

Durable Construction:

The GT Omega Racing Wheel Stand is all about quality, stability and durability. Engineered with steel box tubing, it will survive years of heavy use. The twin spar design offers excellent rigidity and improves access to pedals. Perfect for heel and toe driving!

Fully Adjustable:

Whether you are driving in an office chair, dining chair or even sofa, our stand can be used comfortably in any situation. The adjustable height and tilt feature ensures anyone can find their perfect driving position. Gear shifters can mount on left or right side to suit your preference.

Fold & Store In 30 Seconds Or Less:

As our wheel stand is intended for indoor use we have prioritised a compact and easy to store design. The stand can be folded and packed away when not in use. It folds super-fast and reduces to a surprisingly small size without having to remove your equipment, making it the perfect option for gamers who have limited storage space.

• Space saving racing simulator cockpit, stable design, folds for easy storage
• Pre-drilled mounting points, compatible with most wheels, gear shifters and pedals including Logitech, Fanatec, Thrustmaster and more
• Adjustable wheel, gear shifter and pedal positions, use with your own chair
• Sturdy steel construction, shifter mounts on left or right
• Easy assembly, racing wheel and controls not included

User questions & answers

Question:	Will this work with the PS4 wheel and pedals
Answer:	Sure, and please note: Whatever power adapter you use, this dual monitor dock stand supports max 100W input and offers max 87W charging to the connected USB C / Thunderbolt 3 laptop. Any further questions, please contact us via [email protected]
Question:	Where can i get
Answer:	No el aparato no. El software si.
Question:	If I buy this product will I be able to purchase the monitor frame holder separately later and install to add to this product
Answer:	Hi, I have not done that yet but I hope to in the next few days and will let you know.
Question:	Is there an option to buy without the seat
Answer:	Dear I'm so sorry that our product doesn't work with MAC operating systems.
Question:	Where can i get the arm rest for the seat that are pictured on the 1st pic
Answer:	It's not really that hard. You can put it together loosely with two hands, slide it up your arm and then tighten it with one hand pretty easily.

Product features

Zero Myth Zero Compromise Are You Sure You Can Handle This Let The Legend Begin

The “A” in GTA stands for adjustability and we mean it. Our deluxe Racing seat is adjustable in 14 different seating positions to offers you unequaled comfort. Our Racing Bucket Seats Fully Reclinable - Choose your GTA seat Colors - Midnight Black, Midnight Black With Competition Red Racing Stripes, Competition Red With Alpine White Stripes, Alpine White With Competition Red Stripes or Monte Carlo Blue & Alpine White Stripes.

Yes, It Was Us Who Set The Standard You're Welcome Now Enjoy

The all-new GTA Driving Simulator Will Ignite The Kind Of Passion You Only Fantasized About Your Welcome! Now Enjoy

Stellar Appearance For Galactic Playing

Our GTA Racing Simulator has an amazing look and feel because it is truly amazing and has a feel you will never forget and that’s our promise to you!

A compact racing steering wheel stand perfect for small spaces

Take gaming to the next level with the Conquer Racing Steering Wheel Stand with Gear Shifter and Pedal Mount Folding Gaming Race Sim Stand. Use with your own chair, when finished gaming it folds up for easy storage. Compatible with most major racing wheel, pedal and gear shifter set-ups (sold separately), this stand puts your accessories in realistic racing position for optimal game play. Made from durable steel construction, the supports for steering wheel, pedals, and gear shifter are adjustable. Stand requires minimal assembly, and is easy to fold and store. Immerse yourself in racing games with this high performance compact racing cockpit that is perfect for small living spaces.

Racing Wheel, gear shift and pedals NOT INCLUDED - stand only.

Fully adjustable

Pedal mount, gear shift mount and steering wheel mount have adjustable angles so you can fully customize your racing experience.

Compatible with most systems

Pre-drilled mounting points, compatible with most wheels, gear shifters and pedals including Logitech, Fanatec, Thrustmaster and more. Electronics are NOT included, and may require additional hardware to mount.

Great for the dorm, kid's rooms

Sturdy, durable steel construction and compact design. Use with your own chair to create immersive gaming fun.

Dimensions

Height and tilt angles adjust.

Folds for easy storage

When you're finished playing, just fold and stow away. Great for small spaces.

Customize to your racing game

• Cable management
• Gear shifter mount
• Easy to fold
• Pedal mount