12 best mildew removers

• GET RID OF STUBBORN MOLD AND MILDEW STAINS: Our instant spray cleaner removes the stains left behind from black mold and mildew. They tend to leave behind ugly staining that can go deep below the surface
• REMOVE UNWANTED ODORS: Keep your home free of musty, damp smells that are usually left behind by other sprays; Our spray is great to use in the kitchen, toilet area, drywall and on vinyl shower curtains
• FAST-ACTING SPRAY: Our fast-acting mold stain remover spray, instantly targets deeply embedded stains that linger between bathroom tiles, in grout lines, under the sink, and on shower doors
• NO SCRUBBING NEEDED: Simply spray our ready-to-use formula on the affected area and watch the stains disappear right before your eyes!
• SAFE TO USE ON MULTIPLE SURFACES: Easily remove stains from bathtubs, decks, wood, vinyl siding, drywall, concrete floors, brick walls, kitchen and bathroom tiles and other areas where mold and mildew tend to grow

User questions & answers

Question:	Can this be used to clean the mold in the washing machine
Answer:	Good Afternoon. RMR-86 should not be used on anything metal, as it is corrosive. RMR-141 could be used to clean the area and kill the mold, but will not remove the stains. If you have any further questions, feel free to call 866-822-8744 or email [email protected]
Question:	Would this work on a memory foam mattress
Answer:	I wouldn't recommend using any liquid period on a memory foam mattress. Moisture can ruin the foam and not just aestheticly. Think about a kitchen sponge, it never fully recovers to original form once wet and gets worse over time....that's essentially what you're doing to your bed.
Question:	My cleaning lady likes to use bleach to clean - is this an effective alternative? Thanks
Answer:	The active ingredient in liquid bleach is sodium hypochlorite. The active ingredient in this product is sodium hypochlorite, so it's the same thing, not an alternative. I don't understand why people would pay $17 for 1/4 gallon of bleach and some added surfactant myself. I can buy 5 gallons of 12.5% sodium hypochlorite locally that is a day old or less (bleach degrades and weakens over time and is typically too weak to sanitize around the house about 90 days after it is bought off the store shelf per EPA standards). For the same $17 and have 20x as much, fresher and MUCH stronger than what this is for the same money because this product is probably about 5% or less sodium hypochlorite. I didn't see what percentage of active ingredient was in this product, and I'm assuming that is on purpose.
Question:	Does this kill Black mold or does it just beach it
Answer:	we had a bunch of black mold on one spot of our house when we moved it. Power washed it, bleached it, tried 30 second stuff and nothing. It just kept coming back. We got this and almost a year later it is still gone. It did take about 3 times spraying it but it was a huge and thick spot. We did not scrub at all due to how high the spot was

Product description

How to use

1. Use enough ventilation and wearing rubber gloves

2. Ensure the silicone area is dry as water will dilute the solution and it may affect the effectiveness of the gel

3. Apply a 3mm thick gel to the area with the convenient nozzle.

4. Leave on the surface for at least 5-6 hours

5. Wash off with running water and see the result.

6. If it is not completely cleaned,you may need to repeat step 2-5 again.

• Simple to apply, wait 6-8 hours and rinse stains away, no scrubbing required
• Its fast acting, powerful concentrated gel formula clings to tiles, silicone sealant (around windows, sinks and baths), shower-heads, Pool and more
• As it is gel type, and so does not flow down in vertical and inclined surface, easy to use and clean up more effectively by acting for a longer time
• Perfect for tiles: from black to brand new and extra clean with pure white caulk
• Give it a try before striping the caulk off and redo it.

User questions & answers

Question:	Does it bleach the caulk white? I have colored caulk
Answer:	No does now work period.
Question:	can this be used on acrylic showers
Answer:	You could try one inconspicuous spot, maybe the size of a nickel, and let it sit on there for the recommended time. Wash it off and see the results. Remember to use it on a dry area. This is meant for mold on grout lines. I wouldn't use it on large plain/smooth surfaces. There are other products for those problems.
Question:	Can you only use this for white caulking? Can it be used on brown caulking
Answer:	Either contact the supplier or manufacturer regarding this, or try a very small area to see if it will not bleach out the brown caulk.
Question:	Can you use this on rubber in a front load washing machine that has black mold
Answer:	You may be able to, but I would test a very small area first to see if it would harm the rubber. Also the product would have to be carefully removed completely so as to not get it on clothing or skin from contact with the product. It may take several attempts to wipe it off completely using clean water and a rag.

Product description

Tilex Mold & Mildew Remover Economy Size 32 fl oz (Pack of 2)

• Tilex Mold & Mildew Remover Economy Size 32 fl oz (Pack of 2)
• Delivers a powerful clean without scrubbing
• Eliminates stains before your eyes
• Kills 99.9% of household mold & mildew

User questions & answers

Question:	Does this contain bleach
Answer:	Ergh... you can try it, if it is in a area which is frequented by water, chances are the contractor used the incorrect gypsum board/sheetrock. if that is the case, your only real option is to tear out the gyp/sheetrock and replace it with green board gyp.the mold/mildew is actually not on the paint, it has penetrated the paint and is within the gyp/sheetrock.sorry not the answer you were looking for, but as an architect, i can say i see it all the time :(
Question:	What is the difference between this and Tilex Plus mold & mildew remover that sells for 1/2 the price
Answer:	It is nice to have a window open, But I use the bathroom exhaust fan after spraying and close the door most of the way to keep the smell in the bathroom. It has a strong bleach smell.
Question:	what is so great about these? I just bought the same thing at walmart for
Answer:	I don’t know, but I’ve never had mildew on coils.
Question:	Why the cost of d bottles is $ 49. when I buy a bottle at $ 4.99 each
Answer:	You can use RMR-86 both indoors and outdoors. Please contact us with any further questions. Thank you.

• Quickly removes stains caused by mold & mildew on contact without heavy scrubbing; EASY TO USE - spray, wait until the stain disappears, then rinse
• STAIN REMOVER + CLEANER: High-alkaline, triple-action formula contains; BUFFERED-BLEACH to remove mold stains & mildew stains; CHELATING AGENTS to lift ground-in dirt; SURFACTANTS to cut grease & grime
• BUFFERED-BLEACH TECHNOLOGY is better suited for marine/outdoor upholstery and outdoor acrylic fabrics including Sunbrella; Won't harm stitching or threads
• More effective cleaning power than unbuffered "bleach-water" based products, or diluted supermarket brands
• Works on; awnings, fiberglass, wood, concrete, drywall, siding, tile & grout, gutters, roofs, vinyl upholstery, most outdoor acrylic fabrics, and more *(test fabric for colorfastness before use)
• Professional-strength, concentrated formula for boats, homes, RVs, and commercial use
• Star brite products are proudly made in the USA since 1973

User questions & answers

Question:	Can this be used to clean a tent with mildew
Answer:
Question:	Has anyone used on Canvas? I am needing to clean the inside of a pop up camper
Answer:
Question:	Is this safe to use on marble tile in the bathroom as long as it doesn't sit on there too long
Answer:
Question:	Bought a gallon, thinking it would get mildew out of my dodger, bimini and covers. Product says, don't use on fabric! What about my canvas covers
Answer:

Product features

Mildew Stain Remover

Mildew Stain Remover quickly removes unsightly mold & mildew stains from fiberglass, vinyl, plastic, wood, concrete, tile and more. It begins working on contact. The special buffered formula will not harm vinyl upholstery or threads. Though it was designed for tough marine environments, it can be used around the home or in RVs.... wherever mildew and mold stains are a problem.

Directions

Just spray or wipe Mildew Stain Remover on vinyl cushions, outdoor awnings, siding, gutters, garage doors, vinyl chairs, boat tops, tile, grout, bath mats, shower stalls and curtains, etc.

Do not rinse until mildew stain disappears.

May require a second application and light scrubbing.

Product description

The mold and mildew stain and odor removal solution for professionals

RMR-86 PRO is our most powerful mold stain cleaner. It will deeply penetrate tough to remove mold and mildew stains and lingering odors instantly using a unique hybrid of pure sodium hypochlorite. The deep-cleaning action breaks apart stubborn stains embedded in wood substrates, floor joist, wall studs, drywall, concrete, vinyl, tile & grout, dissolving them quickly and easily, while removing all visual stains left behind from mold and mildew.



Contractor grade formula for multiple surfaces

RMR-86 PRO is an indispensable stain remover for those deeply embedded stubborn mold stains. Our professional grade formula is handy for keeping office buildings, remodels, recreation areas, commercial kitchens, and public restrooms stain free. Remove tough stains from patio or deck areas, wood or concrete floors in the basement, damp brick walls or pathways, kitchen cabinets, bathroom tiles and other areas where mold and mildew tend to grow at a rapid pace.

• TACKLES TOUGH MOLD STAINS INSTANTLY: RMR-86 PRO is our most powerful mold stain remover that utilizes special deep penetrating surfactants with a unique hybrid of pure sodium hypochlorite to remove stubborn stains in just seconds
• CONTRACTOR GRADE: Our extra strength stain removal solution is specifically created for professional use and is 5x stronger than other stain removal products on the market
• READY TO USE: Our ultra strength formula is ready to use and instantly dissolves difficult mold and mildew stains without scrubbing or sanding to get the job done quickly and efficiently, saving you both time and money
• FAST-ACTING FORMULA: Our easy to use liquid stain remover instantly targets deeply seated stains that linger in damp or dark places
• SAFE TO USE ON MULTIPLE SURFACES: RMR-86 PRO removes tough stains quickly from attics, crawlspaces, wood, concrete floors, brick walls, plywood, drywall, decks and other areas where mold and mildew tend to grow

User questions & answers

Question:	Can I use this in my attic on rafters and underside of roof sheathing? Is it okay for the roofing nails that penetrate the plywood
Answer:	Some work areas like outdoors are already well ventilated, so skin and eye protection are mainly needed. Especially indoors, we still always recommend wearing full PPE when applying RMR-86. This includes a hooded tyvek or a chemical poly coated suit, full face respirator with P100 organic vapor and acid gas cartridge filter and latex gloves.Please let us know if you have any further questions. Thank you.
Question:	Can RMR-86 pro be used on acrylic bathtub
Answer:	Good Morning, you should not use RMR-86 in a commercial fogger and it should be sprayed directly on the surface. If you have any further questions, you can reach us at 866-822-8744 or emailing us at [email protected]. Thank you and have a great day.
Question:	Do I need special protective gear to use this
Answer:	Mold, whether in a colony or individual spore has the same cellular structure. This product is disruptive to that cellular structure. So once it is applied to mold, it cannot survive.
Question:	Can this be used in a commercial fogger
Answer:	Yes, this product cleans mold on all soft surfaces without damaging the fabrics or leather. However, it is not a bleach and will not remove dark stains.
Question:	Does it just kill mold, or does it also kill mold spores
Answer:	Add 4 oz. to a quart bottle, then fill with water. A 16 oz. bottle will make 4 quarts. We have found it to be more cost effective this way and we use a lot of it!
Question:	I have mold on the leather inside my car, is this the correct product for removal and prevention
Answer:	If you want to treat your pots, pans, and dinnerware, you can fill her sink up with water and add one ounce of EC3 Mold Solution Concentrate and just dip them into the solution and allow them to air dry. Once Dry rinse them off with water and allow them to dry.
Question:	how much of this concentrated cleaner do you add to spray bottle? Trying to decide if this is more cost effective than the bottle of spray
Answer:	I had a real stubborn block in my kitchen sink and I used two bottles of this product with no result. I then bought SCOTCH CORPORATION 1969 Hair & Grease Drain Opener A Non-Acid Formulation, 1 L, let it sit over night and my drain is flowing like brand new. Hope this helps. You can but this product on Amazon.
Question:	As apposed to wiping my kitchen ware like dishes and pans individually with Ec3, Can I soak a few of them together in a solution of this somehow
Answer:	It says it’s safe for all pipes and septic systems, if you have a problem and it destroys your pipes or toilet, chances are your pipes were close to being bad anyways but I would still contact the company and make them pay for damages assuming you can prove with a plumbing inspection that this caused your problem

Product features

DIRECTIONS FOR BEST RESULTS

EC3 Mold Solution Concentrate comes in a 16 oz. bottle and makes one gallon of the total solution and can be used after diluting per bottle instructions for use in a spray bottle, mister, or fogger to treat larger areas.

EC3 Mold Solution Concentrate works on contact. This product will darken over time, but this will not impact efficacy.

Ingredients: Distilled water, a proprietary blend of Citrus Seed Extracts, and Vegetable Glycerin.

BOTANICALLY BASED

Spraying, misting or fogging with EC3 Mold Solution Concentrate are ways to clean and deodorize the air and all surfaces (hard and soft surfaces like countertops, furniture, floors, drapes, and carpets).

PROPRIETARY BLEND

This proprietary blend of citrus seed extracts is designed for effective cleaning without introducing harmful chemicals into your home.

EASY TO USE

Dilute in a spray bottle, mister or fogger. Spray or mist on floors, walls, ceilings, clothes, shoes, etc. and let air dry, wipe, or vacuum.

Product description

GELIVABLE Cleaning Gel

Weight: 5 fl.oz

Type: Gel

Package: 1 item

Instructions：

1.Wipe the water stains with a paper towel or dry cleaning cloth first.

2.Rotate the lid to squeeze out about 3 mm thick, and apply to the area that needs cleaning .

3.After holding for 3-5 hours, and rinse with water or wipe with a towel.

4.If the area is too large or too deep, the use amount of this product can be increased or the holding time can be extended.

5.If it is very stubborn, please repeat the above operation in several times.

Please Note:

There may be a small amount of moisture after the product is resting, which is normal, please shake it evenly before use!

If you have any questions when you using the product, please let us know, we will guide you to use the product and help you solve the problems, your satisfaction is our greatest encouragement, thank you so much!

• FAST ACTING - Powerful concentrated gel formula clings to tiles, silicone sealant (around windows, sinks and baths), shower-heads, pool and more.
• WIDE RANGE OF USE - Can be used in Kitchen Sink,Ceramic Tile Joint,Bathroom,Wall Surface,Glass Window,Corner,Toilet Joint and other black place.White clothes with Yellowing,all kinds of oil spots,stains can play a helpful role in local wash.
• SAFE - Bleach-Free, Biodegradable, Non-Acidic,Low Odor, Eco-Friendly,Safe and Effective.
• SIMPLE TO USE - Just apply the gel evenly in need of cleaning place, afther holding 3-5 hours,and rinse with water or wipe with a towel.
• PRINCIPLE OF ACTION - Add Lysozyme & Fast Acting & Effective -- Penetrates into the mold roots for rapid decomposition for Long-lasting Protection.

User questions & answers

Question:	Will this work around an air-conditioning vent in the ceiling
Answer:	I doubt it it really does work very well on grout either
Question:	Will it clean the grout in my bathroom floor tile? It’s starting to look dirty and yellowy in places
Answer:	You can use Granite Gold Grout Cleaner® as often as needed. The Stone Care Experts at Granite Gold®
Question:	How is it on vertical joints
Answer:	Its grout cleaner so it should work fine
Question:	Is this toxic
Answer:	Here are a couple suggestions: First, soak the surface with Granite Gold Grout Cleaner® for three to five minutes and then agitate it with the nylon brush. Grout is very porous, and it is possible the issues you are dealing with are embedded into the grout. If there isn't an improvement, mix one part laundry bleach with one part water and spray it onto the surface (the mixed solution won’t harm stone or the grout) and then agitate it with the nylon brush (be sure to wear protective eyewear). The last resort is to regrout the tiles. Following either scenario, seal the grout to build a barrier against the same issues. The Stone Care Experts at Granite Gold®

• ❤Fast Acting and Effective: As it is gel type, and so does not flow down in vertical and inclined surface, easy to use and clean up more effectively by acting for a longer time
• ❤Powerful Gel: High capacity-5 ounce bottle concentrated mold cleaner gel can rest assured to use lasts up to 6 to 12 months or more
• ❤Simple and Quick: Just apply the cleaner gel evenly in need of a place, wait 3-10 hours, wash with a rag or water, gentle cleaner, without scrubbing, sanding, wire brushing (Please apply more on heavy mold and wait for a longer time)
• ❤Wide Range of Use: Can be used in the kitchen sink, bathroom sink, silicone sealant, stainless steel sinks, kitchen and bath tiles, washbasin, toilet bowls, bathtub, wall surface, veranda, ceramic tile, window frame, refrigerator, washing machine silicone sealant, caulk and so on
• ❤Satisfaction: We're so confident that you'll love our Mold remover gel that we'll refund every penny if you don't like it! if you have any problem with it, refund or replace a new one quickly, contact us at any time for help.

User questions & answers

Question:	Is this safe for marble and natural stones
Answer:	Yes it is safe
Question:	After I remove the mold stain from my white wall, do I need to repaint it
Answer:	No clue. Worked great on bottom of shower at glass doors.
Question:	It doesn't seem to remove the mold right away. How exactly does it work
Answer:	Yes, or something close akin.
Question:	The mold stain is too hard to remove, how often would I reuse it better
Answer:	Tilex Plus doesn’t seem to work as quickly and is foamy and requires more wiping up. It seems to work okay but they both do.

Product description

Home Grout Stain and Sealant Stain Whitener for Tiles Grout Sealant Bath Sinks Showers

• Simple & Easy to Use - wait 3-10 hours and rinse stains away without scrubbing required
• Fast Acting & Effective - powerful concentrated gel not easy to volatilize which can provide long-term acting
• Powerful Gel - the gel can stick to any surface and won’t flow down
• Wide Use - it can be used for almost any surface such as tiles, walls, bathtubs, silicone sealant (around windows, sinks and baths), great for kitchen, bathroom, etc
• It Works! - free your surface from ugly stains once and for all!

User questions & answers

Question:	Does this work to clean a Washing machine
Answer:	Search for 35605 either here on Amazon or via Google/Yahoo shopping tab, you should be able to find four 1-gallon refill bottles for ~$50-$55 including shipping. One gallon is 128 fl oz. Expiration is one year, but more realistically it's fine for about 18 months from manufacture (so probably 17 months if you buy it direct from a retailer, given the hording situation going on). BTW, I've had better luck finding this in Home Depot, vs. Walmart or any grocer (much like the N95 masks back in March).
Question:	Can this be used on marble
Answer:	Updating my answer from early this month -- it's easier to find what I was talking about by simply searching for 35605 (there is even some on Amazon right now @ a reasonable price, ~$55) instead of CLO 35605. The refill bottles don't need to be diluted or anything, just pour them into your old container (or the crappy store brand that you may have been using since this has been impossible to find). One gallon is 128 fl oz, so the 4 gallon $55 refill is essentially 8 of this product, with the hassle of having to use a bit of storage space and refilling container. One gallon by itself is saving money vs the current price for this offer (~$35). But Tilex makes a super fine present to friends and relatives, or give it to your neighbors to impress. Old answer: I couldn't find this for months so I went ahead and bought a four pack of the one gallon "commercial" refill bottle. You can find it by searching for "CLO 35605" (eg using Google "Shop"). I already have a couple of 32 fl oz bottles so it isn't too much of a hassle. Including shipping it was approx. $50 for four gallons. The expiration date on this stuff is generally listed as a year (sodium hypochlorite begins to degrade after about 6 mo, loses ~20% potency per year). It should work fine for ~18 months (unless you're buying from one of these resellers & get a product that's already a year old *cough*). The single gallon refill container may be easier to find now -- the cheapest I could find about a month ago was ~$25 after shipping. I just bought the 4 gallons for $50 and gave some to my parents. It was a great Christmas "present" considering how hard these are to find at regular price. Laugh. Anyway, best luck for finding the consumer product in the US would probably be a store like Home Depot. But keep your old containers in the meantime (I never had much luck with those awful store brands). =)
Question:	Is it safe to use on marble
Answer:	Mildew Stain Remover Plus Blocker is safe to use indoors and outdoors on aluminum, glass, fiberglass, stone (except natural marble), cultured marble, acrylic PVC, vinyl, porcelain, rubber, chrome, plastic, Formica, and more. Use it on counters, sinks, shower curtains, tubs, shower doors, toilets, outdoor furniture, doors, ceilings and any where mold stains are a problem.
Question:	Do it work on bathroom ceilings
Answer:	NO Look for the one with the yellow nozzle Tip. That one removes black mold from anything. This one is nothing more than fantastic in a different label. I made this mistake once

Product description

The HOME ARMOR Mildew Stain Remover is a powerful bleach-free spray for the toughest surface stains in your bathroom. It penetrates to remove tough stains left by mold, mildew, soap scum, hard water stains and minerals. Great for use as a bathroom tile cleaner or tub, shower door, or shower curtains cleaner. To use this stain remover spray, shake well. For initial application spray sparingly on tile, tub, shower door, shower curtain or any surface to be cleaned starting at the highest point and working down.Allow to work for 5 minutes before rinsing or wiping with cloth or wet sponge. Use a brush to remove tough stains from mildew. Severe stains may require additional treatment. Allow to dry then spray a fine mist on all surfaces without rinsing.HOME ARMOR Mildew Stain Remover works hard so you don't have to. Keep out of reach of children and follow all directions carefully.

From the Manufacturer

Now make that clean last longer with HOME Armor Mildew Stain Remover Plus Blocker. It has a powerful bleach-free cleaning formula to clean HOME and mildew stains, soap scum and mineral deposits like calcium and lime. Mildew Stain Remover Plus Blocker is safe to use indoors and outdoors on aluminum, glass, fiberglass, stone (except natural marble), cultured marble, acrylic PVC, vinyl, porcelain, rubber, chrome, plastic, Formica, and more. Use it on counters, sinks, shower curtains, tubs, shower doors, toilets, outdoor furniture, doors, ceilings and any where mold stains are a problem. Its long-term blocker effectiveness is not diminished by rain or repeated washings. To use spray on area and clean with brush or rag. Then apply a fine mist to the area to protect against future mold stain growth.

• HOME ARMOR Mildew Stain Remover is a bleach free spray cleaner that removes stains caused by mold and mildew
• This stain remover spray also removes soap scum and stains left by hard water, and minerals
• This stain fighter cleans tile, tubs, shower doors, or shower curtains
• To use, shake well and spray sparingly on tile, tub, shower door, shower curtain or any surface to be cleaned starting at the highest point and working down, Rinse and wipe away after 5 minutes
• Intended to be used by homeowners, apartment or dormitory residents

User questions & answers

Question:	can you use on outdoor cushions
Answer:	I doubt it.. I wasted $30.00 on this product. Wound up by suggestion using swimming pool chlorine @ $ 4.00 a gallon.. That ended the problem pronto!
Question:	Does this remove black mold from shower ceiling
Answer:	Hello, RMR-86 can be used on shingled roofs, just be sure to be careful and cover grass, bushes and ferns to prevent the product from killing any plant life from over spray. We have found that if you thoroughly water the plant life surrounding the work area, before and after spraying RMR-86, it will protect most plant life. Please let us know if you have any further questions by calling 866-822-8744 or email [email protected]. Thank you and have a wonderful day.
Question:	will this work on painted walls
Answer:	No this is not the original scent.
Question:	How much ventilation is needed for a bathroom shower? Is it a strong smell
Answer:	Yes, it does help. Depending on intensity of smell, can't guarantee. But, it does work very well.
Question:	Is it safe to use on air conditionin coils
Answer:	It’s on the approved list of cloth diapers detergent. I did a couple times but switched to powder tide as personal preference.
Question:	Is this for indoor use only
Answer:	It's pure but it sort of have the newborn baby scent.
Question:	Can this product remove the yellow rust stain from house siding
Answer:	I think it did. I used to buy this elsewhere for cheaper.
Question:	Can this be used on an asphalt shingled roof to remove mildew stains
Answer:	Yes. I've found its more mild than dreft and all Baby detergent. How ever once they are 6 plus month's, I'd highly recommend ore treating or an in wash oxy booster for tough food stains.

Product features

Stronger. Easier. Faster.

When it comes to removing and preventing mold and mildew stains, Home Armor offers you proven formulas you can use all around your home. From a powerful, bleach-based formula to a mold blocker that forms a long-lasting barrier against mold and mildew, Home Armor can help you keep your home cleaner, longer. Home Armor works in seconds and there’s no scrubbing.

Product description

Kills 99.9% of household mold & mildew

• Tilex Mold & Mildew Remover Economy Size 32 fl oz (Pack of 1)

Product description

Removes the stains you can't stand, and kills the mold you can't see.Use Tilex Mold & Mildew Remover as directed, and you'll not only remove ugly stains, you'll kill the mold and mildew that cause them. You can also use it to disinfect vinyl and plastic surfaces, even no-wax floors.

• Free bonus: 6 greeting cards included.

User questions & answers

Question:	Does this contain bleach
Answer:	Yes tilex contains bleach.

Product description

Mildew Stain Remover quickly removes unsightly mildew stains and mold stains from outdoor acrylic fabrics, vinyl upholstery, fiberglass, vinyl, plastic or painted surfaces. It begins working on contact. The special buffered formula will not harm outdoor stitching or threads. It is a better alternative to using regular bleach and contains chelating agents and surfactants to clean better than bleach alone. It can be used around the home, on patio furniture, campers, cushions, or wherever mold stains and mildew stains are a problem.

Just spray or wipe Starbrite Outdoor Collection Mildew Stain Remover on most canvas, vinyl cushions, vinyl chairs, tile, grout, shower stalls, shower curtain liners, shower mats, bathrooms, awnings, house siding, wood, and more. Do not rinse until stains disappear. Most stains disappear in 15 seconds to 30 seconds. Stubborn stains may require a second application and light scrubbing. Rinse well after use.

For use on most fabrics made for outdoor use like polyester and acylic such as Sunbrella brand; not recommended for use on indoor fabrics, cotton, or clothing. Always test for colorfastness in an inconspicuous area before proceeding with overall cleaning.

PRO TIP: Bleach-based stain removers do not kill mold and mildew, they only remove the stains. For long term mold and mildew stain control, follow with a Chlorine Dioxide-based (ClO2) biocide spray like PERFORMACIDE Mold & Mildew Eliminator. This EPA registered mold, mildew, slime, and fungus killer will not remove stains, so use both products in sequence for optimal results. ClO2 also removes mildew smells and musty odors. PERFORMACIDE Mold & Mildew Eliminator does not require rinsing and leaves no harmful residue.

FOR LONG TERM, PROFESSIONAL RESULTS, FOLLOW THESE STEPS:

STEP 1: Remove the stains with MILDEW STAIN REMOVER

STEP 2: Kill the organism with PERFORMACIDE MOLD & MILDEW ELIMINATOR

STEP 3: Prevent future mildew stains with Star brite Mildew Stain Blocker (optional)

• Quickly removes stains caused by mold and mildew on contact without heavy scrubbing; EASY TO USE - spray, wait until the stain disappears, then rinse
• STAIN REMOVER + CLEANER: High-alkaline, triple-action formula contains; BUFFERED-BLEACH to remove mold stains & mildew stains; CHELATING AGENTS to lift ground-in dirt; SURFACTANTS to cut grease & grime
• BUFFERED-BLEACH TECHNOLOGY; more gentle than regular bleach to not harm stitching on vinyl upholstery or outdoor acrylic fabrics like Sunbrella
• More effective cleaning power than unbuffered "bleach-water" based products, or diluted supermarket brands
• Works on; awnings, fiberglass, wood, concrete, drywall, siding, tile & grout, gutters, roofs, vinyl upholstery, most outdoor acrylic fabrics, and more *(test fabric for colorfastness before use)
• Professional-strength, concentrated formula for boats, homes, RVs, and commercial use
• Star brite products are proudly made in the USA since 1973

User questions & answers

Question:	Will this clean mildew stains from mesh patio seats
Answer:	Yes, this product can be used to remove mildew stains from mesh patio seats.
Question:	Should I take cover off of cushion before cleaning
Answer:	What are you trying to clean? The cover or the cushion? Anyway, its designed to clean either one, so its really up to you.
Question:	can this be used on the painted frame of an exterior patio door
Answer:	Read the back lable... I said all the surfaces you could use it on....I used it on fabric it worked great. I would think it would be ok on paint. Just test it on a tiny strip first.
Question:	does it work on outdoor rugs
Answer:	Yes, it will work on most rugs, but always test on an inconspicuous area first for color-fastness. Not all rug materials and fabrics hold color the same.

Product features

Remove Stains Off Stucco & Siding

Clean Shutters & Gutters Instantly

Vinyl, Outdoor Fabrics & Metal

All-Surface Mildew Stain Remover

Star brite Outdoor Collection Mildew Stain Remover begins erasing tough mold & mildew stains on contact.

The special buffered formula will not harm vinyl upholstery or threads. It's a better alternative to using harsh cleaners and can also be used around the home or in RVs, wherever mold & mildew stains are a problem.

Directions

Spray or wipe directly onto surface to be treated, wait for stain to disappear and then rinse thoroughly with fresh water. One application will remove most stains; stubborn stains may require a second application and light scrubbing. Ideal for use on outdoor furniture, outdoor fabrics, and vinyl.