14 best hot tubs to go

Product description

See the Informational videos here first. You are buying a 2X 2" Spigot X Dead End X 3/4" Barbs + 2" Street x Slip x 3/4" Barb Manifold Basic Replacement Kit. The Kit consists of a Dead End Manifold with 3/4" Barbs & a Manifold with 3/4" Barbs, Plugs for 3/4" Barbs, a 2" Coupler, 6" of 2" Soft Pipe. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of the other manifold and then a 2" fitting glues in on the other side. The list on this manifold Kit is $109.50. We offer a Kit Discount and Free Shipping in the Lower 48. This part used in newer hot tubs and features . We have plenty of these. For a Video about Manifold parts go to YOUTUBE and look for "Spa Hot Tub Barb Style Manifolds The Hot Tub Professor" or " Spa Freeze Damage Repair Manifolds Leak Hot Tub Professor How To Video" or "Spa Hot Tub Flex Pipe Glue In Style Water Manifolds The Hot Tub Professor"

• 2X Spa 2" X 3/4" Barb Dead End Manifold Kit With Couplers and Clamps
• Accepts 2" PVC Pipe
• (12) 3/4" Ribbed Barbs
• Look at our You Tube Videos about Manifolds See Description for more info
• Comes with Barb plugs to make the manifolds a 11 or 10 or 9 Barb

User questions & answers

Question:	what size is the clear hose? is it included in the listing
Answer:	The clear hose is 3/4" inside diameter and about 3" per barb is included in this listing..or about 36"
Question:	Will this work with the four winds hot tub
Answer:	I have no idea. It worked well on our tub. A few differences but compatible

Product description

Quietly and quickly drain your pool or pond in a matter of hours with the EZ Travel Submersible Drain Pump. This pump is perfect for emptying water tanks, ponds, pools, hot tubs, low lying flooded areas, and more. The impact-resistant plastic body is rust-resistant and built to last. This drain kit includes an exploded parts diagram and instructions. Unlike other drain pumps on the market; this model is rated at horse power and can drain a hot tub in minutes. The pump requires little work to operate and is completely submersible. An overheat prevention mechanism automatically shuts the pump off when the water line becomes too low. Sit back and let this EZ Travel Submersible Drain Pump do the work to drain your pool or pond in just a few hours! Spigot Diameter: 1" to 1.25" Dimensions: 9" x 7" x 15" operation and maintenance manual included. Extra Long 25 Foot Waterproof Electrical Cord. 25’ Long 1.5” Diameter Hose Included. Overall Weight: 12.5 Pounds.

• UP TO 3,700 GPH - Submersible and easy to use, this drain pump can go up to 16 feet under water. The automatic shutoff switch eliminates the need to monitor pump progress. Complete with a drain hose, hose clamp, and automatic float switch shutoff feature, this pump takes the hard work out of pool maintenance.
• 400 WATT MOTOR - This transfer pump drains a hot tub in minutes. It’s folding bottom feet allow for maximum low level drainage. This powerful and compact drainage device will help you empty your swimming pool, pond, or hot tub at the end of the season.
• IMPACT-RESISTANT CASTING - Built to last year after year, EZ pumps are made of durable ABS rust-proof plastic housing molds. This EZ Travel Collection submersible drain pump combines portability, reliability, and power.
• COMPLETE DRAINAGE KIT - This pool drain pump comes with a 20 foot waterproof cord that can be used with just about any standard outdoor water house. Plus, the removable and adjustable spigot fits a variety of hoses and makes pump maintenance simple.
• DIMENSIONS – Pump: 9" x 7" x 15". Drain Hose Length: 20’ Drain Hose Diameter: 1.5” Weight: 12.5 Pounds.

User questions & answers

Question:	Can anyone explain how to use the folding bottom feet? I’ll be draining a spa. Do you fold the feet to drain the last few inches
Answer:	Yes fold the feet. It will not drain all water out. It leaves half inch to inch in spa. You will need to scoop the remaining water out.
Question:	Does anyone know about how long this pump would take to drain a 320 gallon hot tub
Answer:	The product title says 3,700 gallons per Hour. I drained a 15,000 gallon pool in about 22 hours. I was very happy with it's performance it was as fast as the ones I used to rent.
Question:	Can I use my existing 2" backwash hose with this pump to drain the swimming pool
Answer:	The answer is likely yes. The nozzle on the pump is tapered so it allows different sized hoses to be clamped on.
Question:	will this drain a pond that has a lot of silt and muck (does it have a filter
Answer:	It has no filter but does a decent job of draining with a lot of debris.

Product features

Hot Tub and Swimming Pool Drain Pump with Hose Pond/Flood Pump

Submersible drain pump is capable of pumping up to 1,800 gallons of dirty water an hour. It can drain a hot tub in minutes!

Folding Bottom Feet

The newly designed folding bottom feet allow you to extract that last bit of low lying water. An overheat prevention mechanism that automatically shuts it off when the water line becomes too low.

Versatile

Great for draining water tanks, ponds, pools, hot tubs, basements, etc.

Portable and Powerful

Dimensions: 9" x 7" x 15"

Extra Long 25 Foot Waterproof Electrical Cord.

25’ Long 1.5” Diameter Hose Included

Overall Weight: 12.5 Pounds.

1.5 Horse Power

Product description

Sink into the warm, bubbling Coleman air jet spa to relax, unwind & lounge around after a long, hard day! The air jet bubbles are released from the bottom of the spa to create a warm, bubbling hot tub environment. These soothing bubbles will help you relax & unwind. This Spa’s inflatable walls are made of durable, puncture-resistant, UV-resistant Tritech material to prevent damage & to retain its shape no matter how many times it is inflated & deflated. The Coleman spa comes with a reinforced cover with safety clips for extra insulation. This spa set also comes with a pump that inflates it, heats it up, runs filtration & Controls the massage system, along with a chemconnect chemical dispenser. The connect dispenser maintains clean, healthy water by providing a stable level of chlorine That is evenly dispersed throughout the spa.

• Enjoy the ultimate spa experience: nothing beats the feeling of sinking into a warm, bubbling Jacuzzi after a long, hard day while jets project bubbles to massage your back, neck, and shoulders.
• Easy to operate: the digital control panel lets you dictate the water temperature (up to 104 degrees Fahrenheit) and pressure of the jets. A power saving timer can even automate the temperature of the spa up to 72 hours prior to save energy and money.
• Durable and innovative construction: The spa's durable PVC material and I-beam construction offer superior strength and stability while ensuring your hot tub never loses its shape.
• Simple setup and maintenance: no extra tools are needed to setup This portable spa. Simply inflate and deflate with the included pump! A cover comes with for an extra Safety feature, maintain the water's warm temperature, and prevent debris from getting in the tub.
• Benefits of a portable hot tub: with lift handles, the spa can be moved around with ease. This spa deflates compactly for optimal storage and transportation purposes.
• Power Source Type: Electrical Outlet

User questions & answers

Question:	Would it be dangerous to put this in an apartment? How stable is this for a 250 pound man and his 150 wife? How do you drain it if it is safe
Answer:	i have this product I modern floor are rated for 400 pds per square inch I had it in a mobile home all set up and it was awesome it held my 600 pds in human plus the water weight I think it will be fine for you and your wife the room I had it in had no windows and it was more humid in there but no mold be sure to rinse the filters everyday and pool shock it every couple weeks it need like 2 table spoons of shock very in expensive and it is 400 pds per square inch any online research will tell you that
Question:	Filled weight would be too heavy for a deck, right
Answer:	It really depends on the deck. Your truck would put all the weight on only 4 points (the tires), and no way would I put that on a deck. But 2000 lbs from a spa like this is evenly spread out over a 77" diameter circle. My own deck has 2x8 joists, that only span 6 feet between leg supports, with 2x6 boards on top, and the joists are 16" on center. I would have no hesitation putting 1 ton of weight on that, spread over such a large area. ( I also doubt your truck only weighs 1936 pounds... that lighter than a small car!)
Question:	can u use this in the cold
Answer:	It does fine in the cold! We've been using ours in the recent 2 week cold snap. Our is sitting out on a deck with a piece of 1" foam board insulation under the ground cover. It has no trouble maintaining 104 degrees with the top cover on it. The heater can't keep up when the cover is open though. The temp will drop to 102 in about 30 minutes once the cover is open. And if you turn the bubbles on the temperature drops like a rock. Probably drops 2 degrees every 10 minutes with the bubbles going. My son and I were out in it the other day when it was 8 degrees and windy out. Only problem we had was our wet hair kept freezing into icicles LOL. Was awesome. Coldest I've been in it was 2 degrees the other night. I have no plans of turning it off at all this winter. I'm afraid to look at my next electric bill though. Also, be sure to be aware of the fact it automatically turns off in 3 days if you don't push any buttons. If it turns off in extreme cold for long I'd expect the pump to freeze and ruin the whole thing. I use it every night before bed and just play with the buttons a little. That seems to reset the 3 day timer. Also, you need to be aware that if you have a momentary power outage, the hot tub will not turn back on automatically, so if your microwave clock is flashing you need to go restart the hot tub :)
Question:	Does it come full full or am I responsible for providing the water
Answer:	As others have reported, mine also came with the dehydrated water cubes. After much deliberation, we decided to set the cubes aside and as we are water vegan. As a replacement, we went very green and decided to turn the heater on full blast and go with heated hot tub air! Very low impact on the environment...nothing is better that getting into a pair of trunks and settling down into the relaxing tub on 104 degree air...so so nice on your back. The pump provides great atmospheric bubbles of air up and down our backs! The only issue we have is the rapid temperature change of the air we already preheated. We do however get about 12 to 15 second air soak times after the cover is removed! Cheers!
Question:	Does this include the sand to dust the surface with after
Answer:	It does not come with sand, apply the deck-o-seal and pour silica sand over it immediately . You can purchase silica sand at Lowes or Home Depot. Unfortunately, you will have to purchase more than you will need but the price is very reasonable.
Question:	Do i need to add color ? says” deck o seal tan”is it tan color ? i’m confused
Answer:	yes, it is tan. you have a big can and the little can. the little can is the color. you mix together. the kits come in white, tan and grey. if you dont want to mix, you can get HS1 which is already mixed. 32 oz. pouches.
Question:	is this the 96 oz kit
Answer:	Yes this is 96 oz kit.
Question:	How much is the deep and wide gap should be ? And if isnot in range what i should feel the gap with . I just did mine with polymeric sand only
Answer:	Mine was fairly deep and I used the rope caulking so my gap to fill was about 1/2 x 1/2” some areas were almost 1” wide by 1/-3/4 deep. It worked great
Question:	Can this be used on a shower floor
Answer:	I would not recommend this for shower floors.
Question:	Can it applied over painted cool deck and patch repairs
Answer:	As long as the Cool Deck has been previously painted with a water-based paint, yes you can. It can also be painted over patches if that's what your asking.
Question:	Can this be used on block wall
Answer:	I don’t see why not. It’s just a little bit thicker then paint.
Question:	How can I get this tinted
Answer:	To tint this you add 1gallon of paint in the color you want. We have several Amazon listings with paint that will work well in it. Message me and I will direct you to them. You can purchase both at once and I will mix here at the shop.
Question:	Is this acrylic based pait
Answer:	Yes, easy clean up latex
Question:	Does it say if you can use this on metal pools
Answer:	To the best of my knowledge, No it does not. It is very good paint that needs to be thinned but is meant for concrete pools.
Question:	Can this be used on fiberglass pools
Answer:	Yes
Question:	do you have to use primer first
Answer:	I haven’t used primer, also make sure to apply paint during the right temp, to hot and paint will bubble. Also make sure to let it cure
Question:	I have some cracks inside the expansion joints, will this work
Answer:	Deck-O-Seal flows a great deal when wet before it sets up. It has to be constrained or it will flow away. You will have to pour fine sand in the crack to create a floor for the product to sit in if you prepare the joint properly you will love this product.
Question:	From the 1st step to the last is it hard to keep debris out of the pool? Thanks
Answer:	It's unclear to me whether or not we're talking about a vinyl pool and a stone edging around it or is it a plaster pool as far as debris is concerned you need to look at the trees the wind direction and the time of the year generally if you're living in the east August would be the best time to do this
Question:	How long does it take to dry? I have a pool party in a week
Answer:	Overnight, if you mix it right.
Question:	How do I remove leaves and debris after it has dried
Answer:	after it dries it is hard to remove small debris but if you can rub a sponge back and forth over the leaf you might be able to sand it down.
Question:	can it be used on galvanized steel (stock tank
Answer:	no,need special paint for galvanized steel.
Question:	My pool has a plaster finish. Do I need to use a primer before applying this paint
Answer:	I don't think so- you will need to clean it with TSP. You can check the web site to be sure.
Question:	Can this be used on a fiberglass pool with white gelcoat
Answer:	I am not an expert, but I see no reason you couldn't, it works well even over old pool paint
Question:	How much paint is needed
Answer:	How much paint is needed for a 18 x 34 pool
Question:	Do you have to apply the cool deck coats and then another clear sealer on top of that? What kind of clear sealer do you get
Answer:	The COO! pool deck BUNDLE comes with one gallon of Triple Crown Cleaner and a half gallon of the SealBack Clear Sealer. SealBack is a water based acrylic sealer that is engineered for sealing the COOL! coating itself. It's water thin, delivering great penetration. We recommend 2 GOOD coats of COOL in the morning hours before temperatures get too hot (use 3/4" nap rollers) , and 2 THIN coats of SealBack during the hottest part of the day(use 1/2" nap rollers)! The SealBack sealer loves to be applied in the bright sunshine for maximum cure. Thank you and reach out to us anytime! (888) 776-2242 .
Question:	How long does it take for the sealer to dry
Answer:	Hi. Thanks for your question. In a typical application, the sealer will be dry and open for foot traffic in one hour. However, you should not apply the sealer if rain is in the 24 hour forecast. Hope this helps! We appreciate your interest in our product.
Question:	Can this be used on a wooden deck
Answer:	Hi. No. Cool is only for concrete. Thanks for your interest in our product.
Question:	What type of paint and how much
Answer:	Add 1 gallon of paint to the product.
Question:	Does this include the sand to dust the surface with after
Answer:	It does not come with sand, apply the deck-o-seal and pour silica sand over it immediately . You can purchase silica sand at Lowes or Home Depot. Unfortunately, you will have to purchase more than you will need but the price is very reasonable.
Question:	Do i need to add color ? says” deck o seal tan”is it tan color ? i’m confused
Answer:	yes, it is tan. you have a big can and the little can. the little can is the color. you mix together. the kits come in white, tan and grey. if you dont want to mix, you can get HS1 which is already mixed. 32 oz. pouches.
Question:	is this the 96 oz kit
Answer:	Yes this is 96 oz kit.
Question:	How much is the deep and wide gap should be ? And if isnot in range what i should feel the gap with . I just did mine with polymeric sand only
Answer:	Mine was fairly deep and I used the rope caulking so my gap to fill was about 1/2 x 1/2” some areas were almost 1” wide by 1/-3/4 deep. It worked great

Product features

In The Swim Patio and Deck Paint

In The Swim Patio and Deck Paint is a water-based acrylic non-slip concrete deck coating. Patio and Deck Paint can be applied to damp surfaces, cutting the time between site preparation and roller painting. First time applications will require a minimum two coats depending on surface porosity. Patio and Deck Paint should be applied with a 1/2" nap roller on smooth surfaces. Use a 3/4" nap roller cover on rougher surfaces. Coverage: 90 - 125 sq ft per gallon on average. If the outside ambient air temperature if above 80°F, wait 4 hours between coats. Curing time: Before foot traffic is 24 - 48 hours depending on the outside ambient air temperature.

Determine Area Size

Determining the square foot of the area you are coating is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account when deciding how much paint to purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the coating you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires a single or multiple coats and if it needs a primer.

Prepare the Surface

When preparing a surface for a coating of any kind it is important to clean the area. Start by sweeping, scraping, and scrubbing the area removing any loose debris. Then hose and scrub the surface with tri-sodium phosphate 10% solution. The solution will degrease and rid the surface of any unwanted contaminants. We suggest on smooth surfaces to do a light acid wash to etch the surface. The etching will allow the paint to adhere to the surface firmly. Hose and scrub the area again with the tri-sodium phosphate 10% solution. Hose completely clean. This will remove additional debris and neutralize the acid. Allow the surface to dry with no puddles or standing water.

First and Second Coats

In The Swim Patio and Deck Paint should be applied to a damp surface with no standing water. Use a 1/2" nap roller on smooth surfaces. Use a 3/4" nap roller on rough surfaces. Roll on the first coat of paint allow a minimum of 4 hours before starting the second coat. After the 4 hour wait you are clear to roll the second coat. Wait 24 - 48 hour before the area can take heavy traffic. Coverage: 90 - 125 sq ft per gallon on average.

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint is a self-priming paint designed as a re-coat for existing rubber-base finishes. If re-coating an existing interior, one coat is suggested. A second coat may be required on unpainted or porous surfaces. Chlorinated Rubber-Base Pool Paint has excellent chemical resistance and color retention, allowing the paint to last 3 years on average. Coverage: 250 square feet per gallon on average. This product should be applied with a 9" roller equipped with a 3/8" nap. Pot Life: Indefinite as long as it is properly sealed. Allow to cure 4 - 6 hours in between coats. Cure 10 days minimum before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

In The Swim Aqua Coat Water-Base Swimming Pool Paint

In The Swim Aqua Coat Water-Base Swimming Pool Paint is a water-based acrylic pool paint. Aqua Coat can be applied to damp surfaces. This water-based acrylic pool paint can be applied to previous acrylic coating or over rubber base paint. Versatile water-based acrylic pool paint yields a short down time of only 3 days in most cases. Requires a minimum of 2 coats on initial application. Coverage: Approximately 250 - 300 sq ft per gallon. Should be applied with a 9” roller equipped with a ⅜” nap. Apply second coat at least 4 hours after the first coat. Pot Life: Indefinite as long as it is properly sealed. Allow to cure for 2 days before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

Product description

Let your worries bubble away as you unwind in the total relaxation of the Intex PureSpa Plus 6-Person Inflatable Hot Tub Bubble Jet Spa. The PureSpa provides relaxation at the touch of a button for up to 6 people with its easy-to-use control panel that activates 170 high-powered bubble jets surrounding the interior of the spa for a refreshing massage. The heating system on this inflatable spa adjusts to fit your personal temperature preference, allowing for a stress-free spa experience. Pampering yourself has never been easier with the soothing high-powered jets that give you the ultimate spa experience. This particular PureSpa also features built-in LED lighting, headrests, and Fiber-Tech PVC construction that stands up to heavy use. Set up is easy and ready for water in just about 20 minutes. If you've always wanted a hot tub without permanently taking up space on your patio, this PureSpa Plus hot tub is a relaxation game-changer.

• TOTAL RELAXATION WITH 170 WATER JETS: Pampering yourself is easier than ever with 170 soothing high-powered jets that give you the ultimate spa experience in relaxing water up to 104 F (40 C)
• HARD WATER TREATMENT BUILT-IN: Built-in hard water treatment system makes water gentler on your skin, clothes, and the entire spa system
• FAST SET UP: Ready for water in about 20-minutes and can be deflated for easy storage or transport; Extra durable Fiber-Tech Construction stands up to plenty of use all season
• FITS UP TO 6 PEOPLE: Provides relaxation at the touch of a button for up to 6 people with the easy-to-use, tilt-adjustable control panel
• EVERYTHING YOU NEED: Includes insulated cover, heater/filter/blower/hard water system, multi-colored LED light (requires 3 AAA batteries, not included), 2 filter cartridges, 2 headrests, thermal ground cloth, inflation hose, carry bag, floating chlorine dispenser, and test strip; Dimensions (L x W x H): 85 x 85 x 28 inches

User questions & answers

Question:	its saying it cannot ship to my place in CA... why is that
Answer:	CA requires a special energy efficient cover which apparently doesn't exist :(
Question:	how do you clean it
Answer:	Same as you would a pool. Buy a net to scoop out the big debris. If you use the proper chemicals, and put the cover on after every use, it really doesn’t get dirty.
Question:	I’d like to know who has it and had used it in low temps
Answer:	I was in it for over an hour and it went from 104 to 100 in about an hour in 39 degrees raining weather. We didn’t turn the bubbles on because the bubbles are just cold air being pumped into the water which cools it much more quickly. With the blow up cover on it will get back to 104 in this weather in about 3-4 hours. It did take 3 days after set up for it to reach 104.
Question:	Any suggestions for running it during freezing temps? I know it's not recommended, but I'm guessing it's fine as long as the heater runs continuously
Answer:	Get some R10 2 inch foam board to put underneath. In colorado it regularly gets to the teens and so far I have no trouble maintaining 102 temp. The heater runs more during the cold months, but still cycles.

• Guaranteed to fit hot tub size up to 85”(L)x 85”(W), Actual cover size is 87”(L)x87”(W)x20”(H). NOTE: This cover can not be used by itself without an insulated hard cover under it.
• Made of top quality 600D polyester canvas complex with waterproof backing. Tough enough to keep rain, hail, snow, dust, leaves and bird droppings away.
• ULTCOVER provides 3 years warranty and guarantees to be 100% waterproof with seams taped, it’s a “WATERPROOF & BREATHABLE” cover.
• Well-made structured air vents at two sides stay open to prevent wind lofting. Heavy duty elastic cords allows adjustment for a tight and easier fit, especially during high winds and severe weather.
• 100% coverage design avoids the furniture exposure in the sun makes your hot tub always look like new.

User questions & answers

Question:	Will the 85 x 85 fit a 78 x
Answer:	Will this cover fit a 87x77
Question:	Do they come in other sizes
Answer:	It will come in other sizes next year.
Question:	I have a hotspring grandee model. the cover including the lifting mechanism is 102” wide by 92” deep and i can’t find a cover protector that fits
Answer:	No this will not fit. The largest model is 95 inches square. Your tub and lifter is rectangular, so it won't fit.
Question:	I have a 2014 hot spring jetsetter and the measurments are 84" x 65 ". do you make this size
Answer:	Sorry, There are only two size available, 85x85 inch & 95x95 inch.

Product features

ULTCOVER Heavy Duty Hot Tub Hard Cover Protector

Perfect to protect your hot tub hard cover away damage from nature elements.

Product Highlights:

• Made of top quality 600D polyester canvas complex with waterproof backing.
• Tough enough to keep rain, hail, snow, dust, leaves and bird droppings away.
• 100% coverage design avoids the exposure of furniture in the sun makes your hot tub always look like new.

Product description

Saltron Mini: Easily convert any hot tub to a saltwater system with Saltron Mini by Solaxx. This salt-based spa system produces a pure form of chlorine by electrolysis of natural salt (NaCl). Salt is converted to chlorine to do its work -- then the chlorine recycles back to salt. The concentration of salt needed is small (less salinity than tears). Product Notes: For hot tubs or swim spas up to 2,000 gallons. Cell holder for storage while bathing. 6' power cord; 120 VAC, 50/60 Hz, 0.2A. 12' cell cable; output: 5 VDC, 2A. 1-year manufacturer's warranty.

• Add-on Salt System chlorine generator
• For hot tubs and swim spas up to 2000 gallons
• Super simple installation - no plumbing - ultra-low energy consumption
• Built-in timer/controller with LED indicators
• Titanium Cell: Most reliable system available

User questions & answers

Question:	Can it be used in a chest freezer ice bath? How long do you think the water would last
Answer:	In the trouble shooting guide, a frozen cell is an error condition, so probably can't use it in a freezer.
Question:	Would this be safe to use with an extension cord
Answer:	I currently have an extension cord running to mine, however I will run an electrical box in conduit in the spring, just so I dont have a cord running across my patio. This has been a great product. Been using it since November with no issues. I have never had to add any chlorine since installed.
Question:	How much salt do you use? I have a 250 lb tub
Answer:	I added way too much and had to drain my tub. Literally 1 cup at a time is best. Use a test strip specifically for salt tubs. I love it now.
Question:	Are there any hot tubs that can't be converted to salt with a drop in? i bought a lifesmart ls350dx
Answer:	I don't think so. HOWEVER if your heater is electric and internal to the water flow you should place a sacrificial zinc between the pump and the heater. Salt corrodes the electric heating element, sacrificial zinc ensures a longer life cycle for the heating element.

• Large quantity: package includes 24 packs turtle creamy white oil absorbing sponges, turtle shape design, unique and good absorbent, large quantity, great for kitchen, swimming pool, etc.; Note: the scum sponge can be as well as original after absorbing water
• Dimension: each sponge measures approx. 11.5 x 11.5 x 3 cm, simple design offers a unique and easy way to clean and maintain your swimming pool area and other areas
• Good efficiency: oil absorbent sponge helps eliminate scums that forms in swimming pools, hot tubs, jetted tubs, jacuzzies and spas, prevent the formation of a scum line in your pool or spa
• Easy to use: just put the sponge in a water-filled pool, tub or Jacuzzi, then sponge can help you to clean the pool by itself without any other difficult set-up, and soak up so many things you don't want in your water
• Storage method: prevent the sponge from yellowing, please do not place the sponge in the sun light, and be careful not to expose the sponge to the air; After opening, please package in sealed color or black bags, can extend the service life of the sponge; Vacuum packaging, to keep the sponge flexible, please take out the sponge to place about 20 minutes before use it

User questions & answers

Question:	Does this product have a temperature limit
Answer:	I don't think it works at any temperature. It didnt melt at 104...but it didn't absorb body oil either.
Question:	They arent working. Ibhave 4 sitting in open air for the last 2 days and 2 in the hot tub. None of them have opened up. How do you get these to work
Answer:	You just toss the turtles in your pool or hot tub, it takes about 12 to 24 hours to see a change in color, they don't expand once they hit the water. If you have had the turtles in for the period mentioned above, and there is no change in color, you either have a very clean pool, or hot tub, or you need to leave them in for a couple of days, or they are not working, and then, I would try reaching out to the company.
Question:	What are these made of
Answer:	Hi, this is made of polyurethane sponge.
Question:	How many to put into your hot tub at a time
Answer:	mine also turned a rusty color

Product description

U.S. Pool Supply Professional Spa, Hot Tub, Pond or Pool Hand Leaf Skimmer Net with 12" Aluminum Pole - Deep Ultra Fine Mesh Netting Bag Basket

Enjoy A Clean Pool

Ideal daily use handhold 2 foot long leaf skimmer that provides fast, easy and efficient cleanup of leaves and debris in spas, hot tubs, ponds, small swimming pools or a inflatable kid, kiddie pools.

Sturdy Lightweight Net

Net frame dimensions 11" wide x 12" long with 6" deep durable ultra fine mesh netting basket. Includes a detachable 12" aluminum pole handle, making the total length 2 feet (24"). An excellent long lasting sturdy handhold net with a little bit of flex for easier maneuvering.

Skim The Finest Debris

The large volume ultra fine mesh netting bag basket allows it to collect more debris at a time, and is also very effective at holding the leafs within the net bag while maneuvering the skimmer throughout the water.

Safe and Easy To Use

The durable plastic frame is safe for use in all types of pools and it won't mar pool liners.

Buy with confidence, as our premium quality pool brush is built to last, and if you're not satisfied with it at anytime within one year of purchase, we'll provide a refund or replacement.

U.S. Pool Supply is your Online source for professional high quality and affordable pool cleaning and maintenance supplies, pool accessories and for pool recreational activity pool toys, floats and leisure lounges. We offer all the essential items needed to help residential pool owners care for and maintain their own pools, so they can eliminate the need for expensive scheduled pool service technicians. Our goal is to provide you the premium products you need to keep your pool clean and ready for use, so you can focus on what's most important... enjoying your pool!

• Enjoy a Clean Pool: Ideal daily use hand-held 2 foot long leaf skimmer that provides fast, easy and efficient cleanup of leaves and debris in spas, hot tubs, ponds, small swimming pools or a inflatable kid, kiddie pools.
• Sturdy Lightweight Net: Net frame dimensions 11" wide x 12" long with 6" deep durable ultra fine mesh netting basket. Includes a detachable 12" aluminum pole handle, making the total length 2 feet (24"). An excellent long lasting sturdy handhold net with a little bit of flex for easier maneuvering.
• Skim The Finest Debris: The large volume ultra fine mesh netting bag basket allows it to collect more debris at a time, and is also very effective at holding the leafs within the net bag while maneuvering the skimmer throughout the water.
• Safe & Easy to Use: The durable plastic frame is safe for use in all types of pools and it won't mar pool liners.
• Buy with confidence, as our premium quality pool leaf skimmer is built to last, and if you're not satisfied with it at anytime within one year of purchase, we'll provide a refund or replacement.

User questions & answers

Question:	Is this fine enough to pick up that bit of surface film in a hot tub
Answer:	Yes it works for me! I love this little net it's not too big and it does a great job!
Question:	Can it be connected to a standard sized pool pole
Answer:	No, completely a different size. Hole is too small for a standard sized pool pole.
Question:	Where is this made
Answer:	I'm not sure where it's made, but the 2 I bought are still holding up well.
Question:	Is the net replaceable
Answer:	As in putting a new net on the frame? I do not believe so.

Product description

Why use a Saltwater Chlorine Generator

Improved water quality – clearer and cleaner water.

All natural salts used with a generator provide continued skin softening benefits.

Reduced maintenance – Set it once and the generator takes care of it from there. You don't have to remember to add chlorine every day. Make sure to keep an eye on the pH. Salt water chlorinators tend to raise the pH.

More natural water sanitation by producing chlorine on site – in your spa.

Not as harsh on your swimsuits - will not fade colors quickly.

More cost effective than buying gallons of chemicals.

Lowers your Carbon Footprint – No more storing and pouring smelly chlorine or bromine liquids or tablets and having to discard their carbon rich containers.



Quick and Easy Installation:

Mount the control box to the SPA's skirt, add salt and place the electrode into the water – that is all there is to it. The control panel has 3 buttons for adjusting the chlorine production and 4 indicator lights to let you know when it is making chlorine or if you need to check the cell. The SmarterSpa doesn't have a timed cycle and will automatically start making chlorine when needed. After it has finished a chlorine production cycle, it may be hours or even days until it turns on again. The SmarterSpa will definitely reduce the maintenance requirements of your spa and significantly reduce the amount of chemicals you may be currently using.



Requirements:

110/220 VAC Outlet That is GFCI Protected

Weather Protection Required At Power Source



What's in the Box:

15' Power supply cord, 10' Cell supply cord

Control box with 3 buttons, 4 lights

Low 5.5Vdc power 100/240 vac power supply

Salt and Chlorine Test Strips, 10 tests each

1-Year Limited Warranty

Owners Manual and cable clips

• CONTROL-O-MATIC POOL CHLORINATOR - Quite simply, Control-o-Matic is a line of saltwater chlorinators for home or professional swimming pools or spas. Enjoy better water and a dramatic reduction in maintanence.
• SMART AUTOMATIC CHLORINATION – Using its chlorine detection system, the MegaChlor will generate only what it needs to when it needs to. The self-cleaning system reduces the time you spend worrying about maintenance.
• EASY TO INSTALL & USE – The ControlOMatic's plug-and-play system does not require pluming or mechanical alternations.Just attach the panel to the outside of your pool and lower the electrode into the water.
• EASIER ON EYES & SKIN - Salt is the same ingredient used in today’s water softening systems, and has a natural affect on softening the water in your pool or spa as well.
• SPECIFICATIONS – Can generate up to 30 grams of pure chlorine per day. 10 levels of production, supporting up to 1,000 gallons of water. Features built-in self-cleaning reverse polarity technology.

User questions & answers

Question:	Can you use bromide salt
Answer:	No, all The Laundress products are tested on Gwen & Lindsey (owners of the company)
Question:	I had a spa technician tell me that salt + heat = corrosion. Has anyone had more problems with their pumps or seals after coverting to salt water
Answer:	That's a typo or misprint in the product title; it's not fl oz, it's oz (see photos of the front label).
Question:	I have a 325 gallon spa. Which should I buy and why? Smarter spa versus chlormaker why buy one over the other
Answer:	Sodium Carbonate (soda ash) is the other ingredient.
Question:	Does the cell have to be replaced every year
Answer:	Oxiclean has less than 40% Sodium percarbonate Oxiboost has 80%. The sodium percarbonate is the active ingredient that releases oxygen when dissolved in water. There is a significant difference in cleaning potential and amount of product needed to complete a job because of the higher concentration in Oxy-Boost.

Product features

ControlOMatic Hot Tub and Spa Salt Water Chlorine Generators

ControlOMatic develops and manufactures saltwater chlorinators for the pool and spa industry throughout the world. For the last 30 years, saltwater pools have been in high demand due to improved water quality and the huge reduction in maintenance that a saltwater system provides. Until now, a smaller saltwater system designed for a spa or hot tub was not an option. The standard spa chlorine generators offered by ControlOMatic are very easy to install and do not require the spa to even be on or interfere with the current plumbing or electronics. Simply add salt, place in the water, turn it on, and let it run.

Easier On Skin and Eyes

High concentration levels of chlorine can be hard on the skin and hair. Because the ControlOMatic systems manage and produce a relatively consistent level of chlorine all the time, you would naturally avoid those high concentration peaks. Bathing in salt water creates skin-softening benefits. Plus, lower concentrations of chlorine mean less eye irritation.

Quit the Chemicals

Generally, it is found that most spa owners use their tub for six months out of the year and will need a lot of traditional chemicals. Installing a spa saltwater system allows spa owners to focus on other parts of their operations and to not need to constantly acquire more chemicals.

Swimsuit-Friendly

The soft water in a salt pool will reduce the effects of chemicals on users' swimsuits. Salt is the main ingredient used in the ControlOMatic chlorinating systems, and it will have a natural softening effect on the water in your pool or spa. Swimmers will be happy to know that their swimsuits are safe in our systems' salt water.

Reduced Maintenance

You don’t have to remember to add chlorine every day. Set it up once and the generator takes care of it from there. Your time and efforts will be saved, allowing you to use them effectively in other ways that are in your best interests. Make sure to keep an eye on the pH, as salt water chlorinators tend to raise the pH. You can use a mild acid or even white vinegar to lower the pH, or use dry acid (pH- or pH down).

Product description

Connect to any standard garden hose for many uses - filling pools, spas, hot tubs, and ponds, outdoor pet baths, spot-free car washes, watering gardens & more Remove heavy metals & other contaminants before they get in your pool, spa, or other backyard or household investment. Activated carbon helps balance water chemistry from the start - saving you money! Great for top-offs and entire fills Removes scale, iron, lead & other metals*, chloramines, hydrogen sulfide & other contaminants including odor causing organics, reduces hard mineral deposits & suspended solids, filters up to 10,000 gallons Standard hose fitting at top AND BOTTOM [ *Please note: Carbon Pre-Filters are intended to remove MOST common mineral deposits & impurities, making chemical balancing easier. Filter will not completely purify heavily contaminated or overly problematic water Not intended for filtration of potable water ]

• PRO Active carbon garden hose pre-filter Filters up to 10,000 gallons
• Many uses - filling pools, spas, hot tubs, and ponds, outdoor pet baths, spot-free car washes, watering gardens & more
• Standard hose fitting at top and Bottom
• Remove heavy metals & other contaminants before they get in your pool, spa, or other backyard/household investment

User questions & answers

Question:	does this filter remove hard water
Answer:	Yes it does. I have hard water from a well and this filter does a good job of filtering out the hardness. Hardness levels are within range. I use this filter 3-4 times.
Question:	How do you know when the filter is no longer useable
Answer:	The box says it will filter 8,000 gallons of water and last up to two years, replace when water flow begins to slow or appears restricted.
Question:	How do you store the filter between uses? Does it get moldy inside
Answer:	I put the caps back on and keep it with the hot tub stuff. I can't tell if it gets moldy inside, I can't see inside.
Question:	What micron filter is it using
Answer:	I looked everywhere on the box and filter itself and it doesn’t say.

• 3-IN-1 COMPLETE WATERCARE SYSTEM: Weekly treatment combines hot tub cleaner, conditioners and clarifier to ensure a soft & silk water feel, sparkling clean & crystal clear water for your next soak
• REDUCES HOT TUB COSTS AND USAGE: No need to use multiple watercare chemicals to treat your portable therapy spa or hot tub. Just add one weekly dose of Ouster 3-in-1 Weekly Care with your regular sanitizer. That’s it.
• CLEANS HOT TUB INSIDE OUT: Loosens, suspends & purges inanimate contaminants and other hidden gunk that build up over time.
• LOWEST COST PER WEEKLY DOSE: Our concentrated formula lasts up to 3 times longer than other similar spa cleaners..
• WATER QUALITY GUARANTEE: We guarantee you will have amazing spa water. Every purchase is backed with a no-hassle, 100% money-back guarantee.

User questions & answers

Question:	Does this help scaling like Leisure Time Defender
Answer:	I did not have a scale problem before I started using Bio Ouster and still do not have a scale problem . The best answer I could give you .
Question:	How soon after adding sanitizer should you add 3 in
Answer:	Right away. Ouster needs sanitizer to maximize effectiveness
Question:	hot tub metal control
Answer:	Ouster is not intended to manage metal control issues
Question:	What if i added double the amount i should have
Answer:	You may have some light foaming but the water will be fine for soaking if only a double dose was used after 2 hours. Just use anti foam for the next day or 2 if necessary.

Product features

ADD JUST ONE DOSE PER WEEK TO KEEP YOUR HOT TUB WATER SPARKLING CLEAN AND CLEAR

Adding 3-in-1 Weekly Care to your spa every 7-days minimizes gunk & crud build up from inanimate contaminants in your plumbing system, filter and jets. Plus each treatment includes additional water conditioners to ensure a soft & silk water feel, sparkling clean & crystal clear water for your next soak.

• Hot Tub Filter Cleaner: Soak your filter in our top quality spa filter cleaning solution to increase the efficiency and lifespan of your spa and hot tub filter. Our product is specifically designed to be a filter cleaner for hot tubs and spas.
• Fast Acting, Easy To Use Spa Filter Cleaner: We specialize in ensuring your hot tub cartridge filter cleaner is easy to use. Simply soak your filter in our hot tub cleaning solution for 60 minutes and put the clean filter back into its compartment in your spa, hot tub or pool. No need to soak overnight.
• Cleans Sand, Cartridge, And DE Filters: When you choose an AquaDoc filter cleaner, you're making the right spa choice. Our filter cleaner for hot tubs is specially designed to clean Cartridge Filters, Sand filters, and Diatomaceous Earth filters.
• Professional Grade, Made In The USA: We provide a professional grade hot tub filter cleaning soak solution for use in both commercial and home spas, hot tubs, and pools. Proudly made in the USA, you can rest easy knowing we use the highest quality materials, and you’re helping to provide income to local US citizens.
• Enjoy Your Hot Tub Leisure Time: Filter Cleaner for Hot Tubs by MAV AquaDoc allows you to enjoy your leisure time. Our spa filter cleaner is designed to remove any headaches associated with cleaning your hot tub, spa, or pool.

User questions & answers

Question:	How many ounces do you use to clean the filters. Is it the whole bottle
Answer:	I mix 1/2 bottle with approximately 4 gallons of cool water. I let it soak submerged for one hour and then sprayed the filter media throughout. The result was a like new filter. I do this once a year, spray rinsing with cool water every 30 days without using the cleaner solution.

Product features

Finally, a Hot Tub Filter Cleaner that works... Fast.

MAV AquaDoc's high powered spa filter clean soak solution works wonders on your hot tub filter.

• Fast acting - Soak your filter for just 30 - 60 minutes
• Advanced, Professional grade formula to handle even the dirtiest filter
• Saves you money by extending your hot tub filter's lifespan
• Proudly Made in the USA - we deliver top quality and we appreciate your business.

Spa Filter Cleaner Benefits

Product description

The Helsinki from Lay-Z-Spa is an inflatable relaxation haven for up to seven adults. Bring that secluded hot spring destination to your backyard with the Helsinki, featuring modern wooden panel print and AirJet system. Get ready, because things are about to get hot (and relaxing) in the soothing warmth of the Bestway SaluSpa Inflatable Hot Tub. It's everything you love about hot tubs, but inflatable and portable. What's not to love? The SaluSpa has 81 Helsinki air jets and a cushioned floor with an included ground mat, making it easy for you to unwind. The hot tub inflates in minutes and the rapid heating system quickly heats the water up to 104 degrees. The digital control panel lets you adjust the temperature without having to get out of the tub. You'll hardly notice this hot tub is inflatable with the stylish wood-print design that gives it the look of a real wooden hot tub. This package also includes the ChemConnect chemical dispenser to keep your spa clean, 2 type VI filter cartridges, spa pump, hand inflating pump, repair kit, and cover! Enjoy the luxury of a hot tub in your house by yourself, with friends, or with your partner as a romantic treat with the Bestway SaluSpa!

• Gentle on your skin: Our Built-In clear soft softening system reduces the effects of hard water, like spa staining or skin irritation. Let the warm, soothing water relax your muscles and joints after a long day.
• Operate from inside the hot tub: The digital control panel lets you change the water temperature (up to 104 degrees Fahrenheit) and flow of the jets without exiting the tub. A power saving timer can even automate the temperature of the spa up to 72 hours in advance.
• Superior strength and durability: The puncture-resistant tri-tech material and I-beam wall construction ensures your hot tub will last long and won't buckle or lose shape when people sit on the edge.
• Simple setup and maintenance: no extra tools are needed to setup This portable spa. Simply inflate and deflate with the spa's own pump! A cover comes with to provide safety, maintain the water's warm temperature, and keeps the water Clean from rain or Leaves.
• Portable, stylish, and compact: with lift handles, the spa can be moved around with ease. This spa deflates compactly for optimal storage and transportation purposes. With a wood paneling design, the Helsinki spa adds a nice touch to your deck and outdoor decor.
• Material Type: Drop Stitch. Freeze Shield Technology
• Power Source Type: Electrical Outlet

User questions & answers

Question:	We’ve had our hot tub for a over a year but it really seems to be struggling to heat up now. It’s been 4 days and we can’t break 95°. Any ideas
Answer:	Unfortunately, I have the same issue. I have had mine for over a year as well. It now takes several days for it to heat up, sending my electric bill through the roof. I just stopped using it.
Question:	What chemicals do i use with this spa
Answer:	I have liquid chlorine, pH plus and minus, and test my water 3 times a week with pool test strips
Question:	Where can I get the right size tablets for the dispenser? 1 inch tablets are too large
Answer:	I bought a floating rubber duck dispenser that holds three 3" tablets.. the dispenser that comes with it only chlorinated when the pump is on.. I just remove the duck when chlorinatation is at optimal levels.. in my book more control is key
Question:	Hi,any idea how to prevent Helsinki hot tub from being scratched by cats on the terrace?thx in advance
Answer:	I have cats that love to sleep on the hot tub (it's NOT a water bed). I have found that two large comforters covering the top keeps the cats' claws off the hot tub. I also have several swimming pool noodles circling the top of the hot tub under the blankets, just to make sure they cannot scratch the top. Seems to work for me! Good luck!

• THE MOST EFFECTIVE JETTED TUB CLEANER - Oh Yuk's jetted tub cleaner is specifically designed to break down and remove the Yuk from the inside of your jetted bathtub, jacuzzi, or whirlpool, for a safe, clean, and healthy bathtub!
• SCIENTIFICALLY ENGINEERED to remove dirty soap build-up, bath and body oils, and black flakes!
• 15 MINUTES PER CLEANING - Cleans your tub in just 15 minutes: just run your water, pour in our cleaner, and run your jets!
• LABORATORY AND FIELD TESTED TO PRODUCE RESULTS Our product is laboratory and field tested to produce squeaky clean and superb results!
• FOUR CLEANINGS PER BOTTLE Get up to four cleanings out of one 16 ounce bottle!

User questions & answers

Question:	I ran 4 cycles with 4 oz. each time with bleach/dishwasher soap in between. There are no black specs only a green tub ring. R the jets clean yet
Answer:	Hillary. It doesn't do any good to run bleach/dishwasher soap in between cleanings with Oh Yuk. Bleach and/or dishwasher detergent can't remove the type of soiling in the jetted tubs plumbing system. It sounds like your jets are clean since you don't see more debris or specs in the tub. On the green tub ring, I'm not sure what could cause this. Do you have an acrylic tub? You could try different cleaning methods to remove the green stain. Try 409, rubbing alcohol, Lime & Scale or CLR. DO NOT MIX THE CHEMICALS TOGETHER, try them separately.
Question:	Should I keep using this if I am halfway through my third bottle and have used this each time consecutively? Brown-green sludge comes out each time
Answer:	What I understand is the method to clean, is to first fill tub will hot water above jet line and drop in 2 doses of dishwasher soap and run for at least 30 min (since this is dishwasher soap, low suds). This loosens the gunk / sludge. Drain the tub and refill with hot water. I follow the bottle directions and use 1/4 of the Oh Yuk bottle and run the jets for 15-30 minutes. Drain. Then fill with cooler water and run for 15 min. This is the rinse cycle. Then it should be good. I have used Oh Yuk for some time and clean my tub every 10 uses. Since I am the only one using the tub, I know the residue is just body oils and and sludge that grows in the jets. I also run my bath exhaust fan for 1 hour after using the tub to help in drying the water in the jets. I hope this helps.
Question:	Does it contain bleach?? Will it hurt curtains if it splatters on them
Answer:	No the product does not contain bleach and it should not harm fabrics like curtains.
Question:	Will it work on my air jetted jacuzzi tub
Answer:	The bottle says jetted bathtub cleaner. There is no other equipment noted on the bottle. A website for the manufacturer is on the bottle: www.ScientificBiofilmSolutions.com. A phone number is also available from the label (651) 789-6921. This product is manufactured in the US. I hope this information is helpful.
Question:	So would it work with an intex sand filter pump, particle sand range size
Answer:	The smaller the particles the better it is. It will filter out more bactiria and keep.it clearer. Try and stay at the minimum range size.
Question:	If Im use this sand for the fishtank what kind a filter I should use
Answer:	Just use a pre-filter on your intake tube
Question:	is one 50# bag enough for a standard 55 gallon aquarium
Answer:	I used mine for exactly that purpose and will post a pic of it in my review. One 50# bag will fill a 55gal tank to an avg depth of about 2 inches. For most people, this is sufficient, however, I think I need more for planting and aquascaping. It is really beautiful and cheap silica sand for aquarium purposes.
Question:	What color is the sand. I'm not using it for a pool. Im using it as aquarium substrate
Answer:	That's a great idea. I have a refugium in the sump that grows plants and the sand actually grows a little algae making it have a natural peppered look. I'd have to take a close up of it. Through my testing, thus sand does not alter water chemistry at all so it is good. I only use half bag. Best of luck and feel free to ask more questions.