10 best ion chargers with micro usbs

Product description

Never suffer from the dreaded low battery again. With the fastest charging capabilities on the market, Belkin BOOST↑UP mobile chargers for your car and home are designed for your active, on-the-go lifestyle. The sleek, compact design is easy on the eyes, and you can plug it in virtually anywhere, so a battery boost is always in reach. Charges two devices simultaneously

• Car Charger with Micro USB 2.0 port
• 17 Watt/3.4 Amp
• Charges 40% faster than 5 Watt charging
• Compatible with mobile devices with a Micro USB port, including Galaxy S7/S7 edge/S6/S6 edge/S5/S4, Galaxy Tab A/Tab S, Kindle Fire, Kindle HD, Kindle Paperwhite
• Use any USB cable with charger

User questions & answers

Question:	Does this work with lg stylo
Answer:	Dear customer, To your question, the answer is Yes! Thank you for your support on us. Sincerely, Tpltech
Question:	Length of cord unstretched? stretched
Answer:	Dear Customer, To your question, the answer is YES! Thank you for your support on us. Sincerely, TPLtech
Question:	Does this fit the iPhone
Answer:	Hello, Thank you for purchase on TPLTECH. We're sorry about the inconvenience. From your description issues, I can confirm it's not charging. For this problem, you can try to do this two-step to test this charger & cord which you received: 1. Try Another Same connection cord with this adapter to charge your phone, if it charges, then maybe the cord is unwork. 2. If you have another USB Port Phone Charger, use this Charger with the cord to charge the phone to see it would charge or not. This could confirm does the charger adapter work or not. Also , for the product Sold From TPLTECH, We provide at least 12-Month Warranty for it. You can contact us by email for an After-Sales-Service. Waiting for your reply and try our best to solve the problem for you. TPLTECH Customer Service
Question:	Does this work for an iPhone
Answer:	Dear customer, We are sorry to tell you that this charger is not compatible with your device. But you can click this URL and choose this charger: https://www.amazon.com/Charge-Charger-Compatible-Stylus-Tribute/dp/B07XBKHRRX/ref=sr_1_1_sspa?dchild=1&keywords=lg+stylo+3+charger&qid=1613959151&s=electronics&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTkY4N1FVVEE2OU5MJmVuY3J5cHRlZElkPUEwOTMzMTIyUlZKM1pIUk5JRkZGJmVuY3J5cHRlZEFkSWQ9QTA0MjAwMzkxMUxYOTFHSDRRVTI0JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==. Sincerely, TPLTECH

Product features

Belkin Boost Up Mobile Chargers

Never suffer from the dreaded low battery again. With the fastest charging capabilities on the market, Belkin Boost Up mobile chargers for your car and home are designed for your active, on-the-go lifestyle. The sleek, compact design is easy on the eyes, and you can plug it in virtually anywhere, so a battery boost is always in reach.

Features

- Car Charger with USB 2.0 port

- 17 Watt/3.4 Amp

- Charges 40% faster than 5 Watt charging

- Use any USB cable with charger

Sleek, Compact Design

The Belkin Boost Up Car Charger is fast, but it's also small. Plug it into your dash and it seamlessly blends in with your car's interior. And at just .56 ounces, it weighs less than a few quarters in your pocket.

Product description

IS-Icstation mini Li-ion battery charger board, built-in TP4056 chip, set charging and battery over-charge over-discharge over-current protection all in one practial for your DIY 18650 battery power supply to prolong its lifetime. On-board micro USB and soldering joints 5V input port and charging status indicator ideal for single-cell lithium or multi-section parallel lithium battery.



Specifications:

Chip: TP4056

Input Voltage: DC5V

Charging Cut-off Voltage: 4.2V±1%

Maximum Charging Current: 1A

Battery Over Discharge Protection Voltage: DC2.5V

Battery Over Current Protection Current: 3A

Board Size: 26 X 17mm/1.02 X 0.67inch(L*W)



Package Included: 10 Pcs TP4056 Micro USB 5V 1A 18650 Lithium Battery Charger Board



Notice Please:

1.when use this module at first time, there may be no voltage output between OUT+ and OUT-, it need connect the 5V power supply to active the circuit; When the battery disconnect with this module and connect it again also need this step.

2.When use the phone power adapter as the input power supply, it need the power adater output current is over 1A.

3. If you have any question about products, application and delivery, please send us an email firstly, we will follow up in 12 hours during the business days, thank you!

• Micro USB lithium ion / lipo / 18650 battery charging board, built-in TP4056 chip, set charging and battery over-charge over-discharge over-current protection all in one practial for your DIY 18650 battery power supply to prolong its lifetime.
• On-board micro USB and soldering joints 5V input port and charging status indicator (red indicator is charging, green or blue indicator is full charged)
• Input Voltage: DC5V, Charging Cut-off Voltage: 4.2V±1%, Maximum Charging Current: 1A
• Battery Over Discharge Protection Voltage: DC2.5V, Battery Over Current Protection Current: 3A, Board Size: 26 X 17mm/1.02 X 0.67inch (L*W)
• Warranty: After you receive the parcel. If need any help please contact us through e-mails. You can go to your order and find the order on the list, click contact seller button to contact.

User questions & answers

Question:	can i put 6 18650 cells in parallel
Answer:	This is what I plan to do, and I don’t see why it wouldn’t work. 1S6P should look exactly like one massive cell to the charger. At 1A it’ll take forever to charge 6P (like 12 hours) but it should work alright.
Question:	I noticed the ground pin is not shared between battery and power out. How would I measure voltage of the battery with a 5V microprocessor
Answer:	You can use the batt- pin and batt+ pin. Read both then subtract batt- from batt+
Question:	What is the limit on the output current? Is it based on this board or the battery
Answer:	Standard on the board is 1/2 amp .. You can remove a resistor off the board ( soldered) to get the full 1 amp.. It will charge like most other lipo chargers though the lower the voltage the more current ( up to limit based on resistor) then tapers off Once it's closer to the cut off voltage of 4.2V.. Good little diy charger.
Question:	Can this charger be used to charge (4) 1.5 lithium batteries in series
Answer:	Hi Friend: Sorry that it can not, it can only charge single battery but you can connect then in parallel connection Regards Icstation

Product features

18650 charge module

• Micro USB lithium ion / lipo / 18650 battery charging board, built-in TP4056 chip, set charging and battery over-charge over-discharge over-current protection all in one practial for your DIY 18650 battery power supply to prolong its lifetime.

Product description

1. MINI USB input terminal with a female, can be directly input to do with the phone charger rechargeable lithium battery, And still retains the input voltage wiring pads, can be very convenient DIY.

2. It can be used for voltage 3.6 3.7V, etc. 18650, polymer and other lithium battery charge and discharge protection.

3. Input voltage: 5V

4. Charging cut-off voltage: 4.2V

5. Maximum charge current: 1000mA

6. Battery over-discharge protection voltage: 2.5V

7. Battery overcurrent protection current: 3A

8. Board size : 17.16 mm x 26.17 mm

• Micro usb lithium battery charging board with overcharge, overdischarge and overcurrent protection
• On-board micro USB and soldering joints 5V input`port and charging status indicator(red indicator is charging,green indicator is full charged)
• Input Voltage: DC5V,Charging Cut-off Voltage: 4.2V Maximum Charging Current: 1A
• Current: 3A, Board Size: 26 X 17mm/1.02 X 0.67inch(L*W)

User questions & answers

Question:	What is the maximum current output
Answer:	Dear Barbara baker, Thank you for your question, this android charger not work with lg stylo 6,you need to use the type c charger.
Question:	If there is nothing on the load (load is switched off), but batteries are connected (and no USB), does the battery drain down? (e.g. it's in storage
Answer:	These are great chargers. The cords are very durable and long. Fast charge for my LG K-30.
Question:	what is the output voltage? Is it regulated(constant
Answer:	It should be compatible with any android phone.
Question:	What is the - & + out for Can I put a load on those
Answer:	Dear Judy,Thank you for your question, this android charger set is compatible with LG Phoenix 2.

Product description

We are a professional rechargeable battery factory from 1999 year, we only produce professional ,high efficient rechargeable battery.



Why Choose Our USB Rechargeable Battery?



1. Safe：Designed by high quality smart lithium chip,make sure the safe when using or charging.



2. USB Charge：Recharged by USB cable，easy to carry out, can charge through adapter ,laptop USB port, Power Bank by USB cable,no memory feature,you can charge anytime whatever fully or partially drained.



3. 1 Hour fast Charge：Keep 1.5V constant voltage when charging,only need 1 hour to charge fully.



4. No Need Pre-charge：Every battery stocked with 85% capacity when produced from factory,can use immediately once you get it.



5. Long lasting:Recharge up to 1200 Cycle,It will still maintain 80% of Initial capacity after 3 years of non-use.



6. Lighter,Better : lighter than Ni-MH materiel rechargeable batteries,Ideal for all household products including wireless gaming devices, remote control, and wireless mouse and keyboards etc.



7. Compatible with various 1.2-1.5V devices.( Not suit for digital camera,strong flashlight).





Specifications:

Battery Material : Lithium

Battery Style:USB Rechargeable battery

Battery Size: AAA

Capacity= Energy / Voltage

Work Voltage: 1.5V

Rated Input：Micro USB 5V

Battery life: 1200 cycles

Dimensions: H 1.73 X D 0.39 inches

Packages:2 X AA 1000 mWh lithium USB rechargeable batteries



Please note: We transfer the work voltage to 1.5V from 3.7V battery chip via innovative tech ,safer.

• ♥[Package]: 2 counts AAA 1.5V 1000 mWh USB lithium rechargeable batteries.Compatible with various 1.2-1.5V devices. ( Note: Not suit for digital camera,strong flashlight)
• ♥[2 in 1 Micro USB Cable Charge-1 H Charging Fully]：No need charger,no memory, can charge partially drained,1 H charging fully;Easily charged through adapter ,laptop USB port, Power Bank by USB cable(Pls note: All the rechargeable lithium batteries do not support the Blink Camera Series).
• ♥[Multiple Safe Protection]: Designed by high quality smart lithium chip, transfer the work voltage to 1.5V from 3.7V battery chip via innovative tech, Keep 1.5V constant work voltage, better to improve the charging efficiency,superior in charge retention and longevity,Auto-Safety Feature, over-charge Protection.
• ♥[Save Your Money]: Recharge up to 1200 Cycle,more eco-friendly, ; maintain 80% of initial capacity after 3 years of non-use;Every battery storages 85% of initial capacity after factory produced ,save much money than one-time use battery.
• ♥[Warm Tip] We are responsible for every customer, if you meet any problems, please do not hesitate to contact us, contact steps: “Go to Your orders, find your order in the list, and click “problem with order".

User questions & answers

Question:	Can the charger be used with other aaa rechargeable batteries, or only with delipow bateries
Answer:	It can charger with lg aristo. 2410.If your phone supports fast charging, it can quickly charge.
Question:	Are these the same as the purple version
Answer:	Yes,it will,the item include micro usb cable,it can charge with LG Rebel G4.
Question:	if these can be put into my wireless mouse,how long it will last
Answer:	Yes,it will,the item include type c and usb micro cord.
Question:	Are these a good choice for a bug out bag
Answer:	Hello, Thank you for your interesting in this product. The charger works with the straight talk LG rebel 4 LTE phone. You can charge your phone by using the Micro USB cable which sells with this charger. TPLTECH

Product features

Deleepow 1.5V USB Rechargeable AAA Lithium Batteries with 2 in1 USB Cable

Deleepow USB lithium aa batteries is designed by high quality integrated 3-in-1 safety chip，3 in 1 Controller, provide multi-protection during using and charging process.

Pls note: All the rechargeable lithium batteries do not support the Blink Camera Series.

1.5V Constant Output

· Keep 1.5V constant output voltage from 100% to 0% capacity.

· We focus on every detail, we always keep making better improvement to provide better user experience. We believe there is no best, only better.

Multiple Safe Protection

Designed by high quality integrated 3-in-1 safety chip，3 in 1 Controller, provide, better to improve the charging efficiency, superior in charge retention and longevity,Auto-Safety Feature, over-charge Protection.

Charge for 1200 Times

· 1 Pcs=1200 Pcs alkaline batteries.

· Choose the rechargeable batteries, will reduce tons of trash batteries every year.

· You don't need to spend much money on purchase disposible batteries, will save you much money.

For Women

For electric toothbrush，Skin Scrubber，Alarm clock...

For Men

For Electric Razor Shaver ， game controller，keyboard，rockband guitars...

For Kids

For electric toy cars，remote control...

Product description

Features:

With a Micro USB port, can be charging rechargeable lithium battery directly as a phone charger. Retains voltage input wiring pads, convenient for DIY.

This module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports.

With LED indicators, easily read the charging status.



Specifications:

Input Voltage: 5V

Full charging voltage: 4.2V

Max output current: 1A

Power Indicator: Red for charging, Green for fully charged.

Input interface: Micro USB

Charging Precision: 1.5%

Operating Temperature: -10 ° C ~ +85 ° C

Item Size: Approx. 25 x 19mm.

It can be used for voltage 3.6, 3.7V, etc. 18650, polymer and other lithium battery charge and discharge protection.



Current Regulation:

RPROG(k) - IBAT(mA)

30k - 50mA

20k - 70mA

10k - 130mA

5k - 250mA

4k - 300mA

3k - 400mA

2k - 580mA

1.66k - 690mA

1.5k - 780mA

1.33k - 900mA

1.2k - 1000mA



Cautions:

1. Please make sure the battery is well connected.

2. Please do not connect the output reversely, otherwise it may burn the chip.

3. The connection wire should not be too thin or too long.

4. Current meter can only be connected with the module in series with 5V input.

5. Charging current is better to be 37% of the battery capacity. If you want to charge a battery of 1000mAh, 400mAh current will be enough.

6. High voltage protection, the current will be lower than 1000mAh when the voltage is higher than 5V. It subtracts the charging current automatically to avoid burn damage to chip.



Package Includes:

10 x TP4056 with Battery Protection LIPO Charger Module Board Micro USB

• With a Micro USB port, can be charging rechargeable lithium battery directly as a phone charger. Retains voltage input wiring pads, convenient for DIY.
• This module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports.
• With LED indicators, easily read the charging status. Red for charging, Green for fully charged.
• Input Voltage: 5V; Max output current: 1A
• Input interface: Micro USB

User questions & answers

Question:	I want to wire this in with a battery, switch and a small motor. Is that possible? Are there diagrams available
Answer:	Of course and at a good speed
Question:	I see you can connect power in and a battery, what about aoad as well so it can be permanently installed in devices to work like most rech items
Answer:	Yes, it's compatible with LGV30.
Question:	Will this work with a 6 volt solar panel
Answer:	Approximately 36 inches +/-
Question:	I am using this with a raspberry pi and a 3.7v lipo. I assume I would solder the battery to the bat+ and bat- pads, but where do I solder the pi to
Answer:	Yes.

Product description

Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1 Adafruit Product ID: 1904. Battery not included.

• Battery not included
• For use with Adafruit LiPoly/LiIon batteries only. Other batteries may have different voltage, chemistry, polarity or pinout. Lipo/Lipoly/LiIon Batteries not included
• Comes assembled and tested with a JST cable, 5V input via Micro-B USB connector, For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells), 100mA charge current, adjustable to 500mA by soldering a jumper closed
• Dimensions: 21mm x 19mm x 2mm / 0.8" x 0.75" x 0.08"

User questions & answers

Question:	Can someone please verify that this uses the mcp73831 component? it looks like it but i just want to be sure
Answer:	This rc toy tank is painted. If you would like to paint again, I think it is ok. Thank you for your question.
Question:	Can I use this to charge a 10,8V 6600mah battery? Thanks
Answer:	No. this RC tank does not come with batteries. Thank you for your question.
Question:	What led colors are illuminated to let you know your battery is fully charged up
Answer:	No, can not do like this because it will be fulfilled by Amazon who can not select them for you.
Question:	I tried plugging in a lipo battery with 2500 mAh capacity and the board immediately got so hot I could not handle it, what is the issue here
Answer:	Yes. To be honest I don't remember if they are AAA or AA. My boyfriend put all the batteries in the Christmas toys. However I do know the tank charges off the remote or to save battery life of the remote control you can charge the tank using a usb cable and your computer. I think the usb cable was included. There were several remote control toys between my grandchildren so I'm not 100% sure if it was included or not.

Product description

Battery:



Capacity: 2600mAh



Voltage: DC 7.4V



Battery Compatible: Sony NP-F570, NP-F550, NP-F530



Work for:



CCD-RV100, CCD-RV200



CCD-SC5, CCD-SC5/E, CCD-SC55E, CCD-SC55, CCD-SC6, CCD-SC65, CCD-SC7, CCD-SC7/E, CCD-SC8/E, CCD-SC9



CCD-TR1, CCD-TR11, CCD-TR1100E, CCD-TR12, CCD-TR18,CCD-TR18E, CCD-TR1E



CCD-TR2, CCD-TR200, CCD-TR205, CCD-TR215, CCD-TR2200E, CCD-TR2300, CCD-TR2300E, CCD-TR280PK, CCD-TR290PK



CCD-TR3, CCD-TR300, CCD-TR3000, CCD-TR3000E, CCD-TR3100E, CCD-TR311E, CCD-TR315, CCD-TR315E, CCD-TR317, CCD-TR3200E, CCD-TR3300, CCD-TR3300E



CCD-TR411E, CCD-TR412E,CCD-TR413, CCD-TR414,CCD-TR415E, CCD-TR416, CCD-TR417, CCD-TR417E, CCD-TR425E, CCD-TR427, CCD-TR427E,



CCD-TR500, CCD-TR511E, CCD-TR512E, CCD-TR515E, CCD-TR516, CCD-TR516E, CCD-TR517, CCD-TR555, CCD-TR57



CCD-TR610, CCD-TR617, CCD-TR617E, CCD-TR618, CCD-TR618E, CCD-TR640E, CCD-TR67



CCD-TR710, CCD-TR713E, CCD-TR716, CCD-TR717, CCD-TR717E, CCD-TR718, CCD-TR718E, CCD-TR728, CCD-TR728E, CCD-TR730E, CCD-TR76, CCD-TR760E



CCD-TR810E, CCD-TR818, CCD-TR840E, CCD-TR845E, TR87



TR910, TR913E, TR917, TR918, TR918E, TR930, TR940



Micro USB Battery Charger:



Input Voltage: 5V



Output Voltage: 8.4V



Input Power: 10W



Output Power: 5W



Note: an extra charging plug(output: 5V 1A/5V 2A) is needed.(charging plug is not included)



Package Contents:



2 * 2600mAh Replacement Li-ion Battery for Sony NP-F550/570/530



1 * USB Battery Charger

• Kit includes: Micro USB Battery Charger + 2-Pack NP-F550/570/530 Replacement Batteries
• Compatibale with Sony HandyCams, Neewer Nanguang CN-160,CN-216,CN-126 series LED light and Chromo Inc., Polaroid and other LED On-Camera video lights which using NP-F550 batteries
• Battery replacement for Sony NP-F550/570/530 li-ion batteries
• 2600mAh capacity, rechargeable DC 7.4V Li-Ion battery with premium cell
• Micro USB battery charger for NP-FM50/FM70/FM90,QM71D,91D, NP-F500H/F55H

Product description

RAVPower - Stay Powered

RAVPower is the one-stop power charging solution for millions of customers from around the world. Leader in fast wireless charging thanks to our groundbreaking HyperAir technology, our wide variety of portable chargers and charging accessories provide a reliable way to stay powered anywhere, anytime.



Specifications

Battery Voltage: 7.2V

Battery Capacity: 2000mAh (x2)

Battery Cells: Premium Grade A Cells

Charger Input: USB 5V, 2000mA (max)

Charger Output: 8.4V, 550mA



What's in the Box:

2 x 2000mAh Replacement Battery for Sony NP-FZ100 (Model: RP-BC018)

1 x DC Dual Battery Charger

1 x Micro-USB Cable

1 x User Guide



Notes:

1. Compatible Models: Sony Alpha A7 III, A7R III, A9, Sony Alpha 9, A7R3. If you are not sure about compatibility, please contact RAVPower customer support for more information.

2. Wall charger / car charger / portable charger are sold separately.

3. A7R MARK 4 will display error if it is upgraded to firmware version 1.2.

4.Do not charge the batteries with the original Laptop power adapter. High voltage will burn the charging port.

• Extra-Long Runtime: Go shooting all day with this 2-pack of 2040mAh rechargeable replacement batteries – enough power to capture every precious moment in your life
• Versatile Charging Options: A combination of a type C and a micro USB charging port in order to recharge batteries via a wall charger, car charger or power bank
• Smart LED Display: Clearly shows the charging status of all the batteries, you can identify if the batteries are charging or fully charged at a glance
• Wide Compatibility: Made to the exact specifications of the Sony NP-FZ100 battery, a perfect match for your Sony A7III/A7R III/A9/A7R IV/A6600
• Reliable Safety: Provides complete protection (including temperature control, overvoltage, short-circuit, overcharge and surge protection) for you and your devices

User questions & answers

Question:	Are these lithium ion batteries? Or something else
Answer:	I do not know what type of battery but they did not check the shipping company and reached me with all its comfort, but after using it it proved its worth and its excellent price and I advise it and strongly ..^_^
Question:	Is this charger compatible with both the a6000 series cameras and the new a7iii cameras
Answer:	Thanks for your inquiry. This is compatible with a7iii but not compatible with a6000. If you need the charger that works for a6000, please click the following link: https://www.amazon.com/gp/product/B01JG54F3C
Question:	Is this compatible with sony a7riii firmware v
Answer:	I bought six of these batteries for Sony a9 in the last four months and the new Firmware 6 made these useless due to power incompatibility warning that pops up on the camera randomly. I can’t use these because I missed an important photo due to battery warning which you have to click twice to dismiss. Ravpower batteries are Only good till Sony upgrades their firmware then you have a battery that is useless.
Question:	Is this charger compatible with Sony brand batteries
Answer:	I bought six of these batteries for Sony a9 in the last four months and the new Firmware 6 made these useless due to power incompatibility warning that pops up on the camera randomly. I can’t use these because I missed an important photo due to battery warning which you have to click twice to dismiss. Ravpower batteries are Only good till Sony upgrades their firmware then you have a battery that is useless.

Product features

Note:

• A7R MARK 4 will display error if it is upgraded to firmware version 1.2.
• Do not charge the batteries with the original Laptop power adapter. High voltage will burn the charging port.
• Compatible Models: Sony Alpha A7 III, A7R III, A9, Sony Alpha 9, A7R3. If you are not sure about compatibility, please contact RAVPower customer support for more information.

Perfect Companion for Your Camera

Get plenty of juice to capture life's unexpected moments with the RAVPower NP-FZ100 Camera Battery Charger Set. Includes a 2-pack of 2040mAh replacement batteries and a dual port charger which serves as an ideal backup solution for intrepid photographers who push on and continue taking videos and photos while charging their empty battery.

2 Charging Ports

Including a type C and a micro USB charging port for convenient charging.

3 Ways to Charge

Easily power up batteries via a wall charger, car charger or even a power bank.

Goes Where You Go

Effortlessly portable charger base can be stored in your bag or suitcase for easy carrying.

Product description

Product description



Input Voltage: 3.7V-5.5V

Input Current: Max 1A

Output Voltage: 5V

Output Current: Max 1A

Discharge End Voltage: 2.9V

Preset 4.2V Charge Voltage, ±1% accuracy

Discharge Efficiency: 85% (Input 3.7V, output 5V/1A)



Package Content:

Boost Step Up Power Supply Module *10.

• 1. Built-in display light: Red light flashes when charging. Blue light flashed when discharging. Red light constantly on when full charged.
• 2. Input Voltage: 3.7V-5.5V. Output Voltage and Current: 5V 1A.
• 3. Integrated protect functions: Output overvoltage, overload, short circuit, over-charge/discharge protections. Temperature control and over-temperature protection.
• 4. Integrated charge and discharge management, supported trickle and zero voltage charging.
• 5. Wide Usage: Applicable to manifold batteries such as Polymer, 18650 Lithium, Mobile Phone and Tablet Battery etc…

Product description

With ongoing advances in rechargeable batteries and chargers, single use alkaline batteries can now be replaced with higher capacity, environmentally friendly, next generation rechargeable Lithium batteries. Bump batteries charge faster and last longer in today’s high-tech electronics and most importantly can be re-charged up to 1000 times with no memory effect or loss of power.Description

• ULTRA CONVENIENT--No charging base required. Just plug into any USB port to charge with the Integrated Micro-USB charging ports
• LONG LASTING--Recharge up to 1000 times
• NEXT GENERATION-- Polymer Lithium Batteries work on any device that requires standard batteries AA or AAA such as Remotes, Toys, Keyboards, Mouse etc
• REUSABLE -- Fast charge time of about 90 minutes
• The unique 4-1 charging cable. BUMP batteries are sustainable, superior technology, and cost effective easy to use solution for all your battery needs.

User questions & answers

Question:	Will they work in high lumen LED flashlights
Answer:	I have bought this item b4 quality as expected quick charge & one thing I noticed is the charger is not hot during charging smart phone but on ipad or tablet it's warm not very hot so far so good & it's safe.
Question:	made in china
Answer:	It supports 5 volts no problem...
Question:	How many double aa and triple aaa batteries are coming
Answer:	Yes
Question:	How do you dispose of these safely when the time comes? How are they sustainable
Answer:	Hi my dear, Thanks for your question very much. I am telling you exactly that this Micro USB Cable is compatible with your lg Aristo 5. The Android Charger Cable has a micro usb connector and it is compatible with all micro usb devices, such as LG Aristo 5 4+ 3 2, LG stylo 3/2 Plus, LG K50/K40/K30/K20/ K10(2018)/V10/Q6/Q60/G4, and more devices with micro-usb connector. This is a wonderful choice when you need such a set including 1 pack Dual USB Wall Charger with 2pack 6ft Micro USB Charging Cable. They can make your life easier! The above is the answer to your question "Is this compatible for aristo 5?", hope my answer can help you! Sincerely, HOOTEK

Product features

Bump USB Rechargeable Lithium Batteries

Every year over 15 Billion disposable batteries are produced & sold worldwide. A majority of these end up in landfills and are one of the main culprits of toxic waste. With ongoing advances in technology, single use batteries can now be replaced with higher capacity, next generation rechargeable lithium batteries.

BUMP batteries charge faster and last longer in today’s high-tech electronics. Most importantly they can be re-charged up to 1000 times with no memory effect or loss of power!