6 best omnimount tv mounts

Product description

The OS175T is a low-profile, easy-to-use small tilt mount. It has gravity tilt built in, allowing for perfect TV placement with minimal effort. The low profile feature offers sufficient room for cable connections and cooling while keeping the TV close to the wall and it allows you to tilt your TV forward to reduce glare or for overhead installations. The open frame provides ample room for power and A/V cutouts behind TV and the vertical rails slide on wall plate for minor left/right repositioning. Fits most: 37 to 80 inch TVs and supports up to 175 lbs of weight.

• Low profile offers sufficient room for cable connections and cooling while keeping the TV close to the wall
• Tilt TV forward to reduce glare or for overhead installations
• Open frame provides ample room for power and A/V cutouts behind TV
• : Vertical rails fit VESA and non-VESA TVs
• Vertical rails slide on wall plate for minor left/right repositioning

User questions & answers

Question:	can leveling be performed after installation
Answer:	It doesn't have that capability. The mount is so stiff that as long as you have it on the wall level, you should not have issues
Question:	What is the vertical height from the top to the bottom holes that need to be drilled? I would like to use the existing holes in my masonry
Answer:	Sorry I cannot get to mine to measure. However, mine came with items needed to mount on a masonry wall. If u already have a wall mount,,maybe try to install new one in one hole and hold bracket up and visualize it with tv to decide if it is approx like u want it.
Question:	How does the tilt work? i see the markings on the side but don't see how the tool works. the tv is hanging with the most tilt
Answer:	I can totally sympathize with you!!! I just bought one that pulls forward, to replace mine, but have not installed it yet.
Question:	Dumb question but I'm not a carpenter. Do I have to find the wall studs or will it be strong enough in the drywall
Answer:	You MUST mount this to the studs. This is a heavy duty mount with at least 4 points to screw into the studs. I am paranoid, so I make several tiny nail holes until I am dead center in the studs, not splitting the stud sides. The slotted holes in the horizontal bars make it easy to find 2 or 3 studs. My TV weighs 95 lbs so I went for this mount so I could get 6 screws securely into the studs. Drywall is only good for about 10 lbs, max. The mount alone weighs about that much.

Product features

OmniMount OmniClassic Series Wall TV Mounts

The OmniMount OmniClassic Series Wall Mounts are a low-cost, low-profile mounting solution for medium, thin profile TVs. Tilt function allows for overhead installation and reduced glare. A quick installation and locking bar makes the mount great for residential or commercial applications. Keeping ease of installation in mind, OmniClassic mounts were designed to be installed in a few simple steps. The mounts support up to 150lbs and are compatible with most flat screen displays up to 80 inch on the market today.

The OmniMount Story

It seems that every day a new company appears on the scene touting its expertise, experience, and business acumen in the world of TV mounts, furniture, and accessories. TVs are big investments and if treated with care, should deliver many years of entertainment. We urge you to trust your investment to a company who has a proven track record (in our case over 35 years) of offering great products, standing behind them, and continuously innovating to meet the needs of our valued customers. As an American company employing hundreds of people in the U.S. and abroad, we hope you will support us and our employees just as our products robustly support your valued TVs, speakers, and A/V components.

Founded in 1978, OmniMount holds a position as global leader in product innovation. OmniMount honed its skills as a pioneer in the field of audio mounts, and it continues to build on its strong foundation and heritage. As the once separate worlds of hi-fi and video have fused into home theater, the company’s scope has greatly expanded to incorporate a complete portfolio of solutions, including TV mounts, AV wall shelves, wire management products, AV equipment rack enclosures, digital signage mounts, audio products, and more.

Product description

The OC120F is a low-profile large TV wall mount. With a capacity of 120 lbs., it is compatible with most flat panel displays up to 70" on the market today.

• Low profile "hidden" design fits most TVs 37-70" and supports up to 120lbs
• Ideal for TVs with bottom or side-loading connectors
• Horizontal wall plate requires only two holes for quick installation
• Small footprint provides ample room for power and AV cutouts behind TV
• Vertical rails slide on wall plate for minor left/right repositioning

User questions & answers

Question:	How to install
Answer:	The mount comes with an instruction manual which details installation instructions. You can also download this manual from our site: http://www.omnimount.com/products/tv_wall_mounts/fixed/oc120f/ Navigate to the "Downloads" tab.

Product description

An Amazon Brand

• Articulating TV wall mount accommodates 32- to 80-inch TVs (up to 130 pounds) for enhanced home TV-viewing experience
• 15 degrees of tilt for optimal viewing angle (+10 to -5 degrees); Articulating design extends up to 19.9 inches from the wall
• Made of heavy-duty aluminum and steel for reliable strength
• Equipped with a built-in bubble level
• Mounting Pattern: 100x100, 200x100, 200x200, 300x200, 400x200, 400x300, 400x400, 600x400mm (does not include 300x300)
• Fits stud 16” apart

User questions & answers

Question:	Does the mount provide enough clearance between the tv and wall to fit a fire tv stick
Answer:	My firestick can with a flexible dongle that you can use to allow the firestick to be mounted parallel to the back of the TV if your HDMI ports point straight back from the back of the TV. You may wanna check the box the firestick came in to find this dongle. Otherwise you can purchase a short HDMI extension cable to do the same thing. Your other option is to just stick the firestick into an available HDMI port on the reciever if you have one plugged into you TV.
Question:	Will this support a 40in Vizio 4k
Answer:	Support it... Yes, will the holes match up and fit for your tv... Another question bc they did not for my LG
Question:	The tv portion of the mount does not have holes centered for vesa 300 300, so do you have to put the wall portion off-center to get the tv centered
Answer:	Don't understand the problem. The mount has slots that should slide into position wherever the holes on the TV are.
Question:	What are the dimensions of the base of the mount? The panel that attaches to the wall
Answer:	Just got mine! Where in the world do you get 3.5x13? Thats the part for the tv NOT the wall mount! 20.5x11 is what mounta on the wall! Went by two peoples measurements amd now my cubbie is off! Learn how to measure!

Product features

For Flat Panel TVs

Designed to provide optimal viewing, the mount accommodates a wide variety of flat panel TVs and includes everything needed for easy installation.

Adjustable Design

The TV mount adds dynamic function to any room. It extends, articulates, tilts, swivels, and collapses, perfect for multiple installation options.

Extendable Arm

With the ability to swivel 180 degrees, the arm mount keeps the TV close to the wall for space-saving convenience and can extend as needed.

Durable Construction

Made of heavy-duty aluminum and powder-coated steel, the single stud TV wall mount ensures reliable strength and durability.

Product description

The OS50F is a low-profile, easy-to-use small fixed mount. Take the guesswork out of choosing your perfect mount! The OS50F is compatible with most TVs 13 up to 37 inches on the market today and supports up to 50 lbs of weight.

• Offers adequate spacing between TV and wall for cooling and cable management
• Allows for simple leveling adjustments post-installation
• Lift n' Lock allows you to easily attach your TV to the mount
• Ships fully assembled
• Includes adapters for greater VESA compatibility

User questions & answers

Question:	My vizio e371vl tv specifies m6 20mm screws for mounting the panel. this mount says it includes m6 12mm screws. will this mount still work for my tv
Answer:	Small under armour logo on left side chest
Question:	How far is it from on bolt to the other that go in the wall
Answer:	Yes, absolutely. It’s a very well made shirt. It’s the same shirt you can go to a local store and get.
Question:	Once the tv is locked into the mount base, is it easy to take the tv back down? Do you just lift it
Answer:	I usually wear a large and it fits me perfectly. I’m 5’10” 190lbs.

Product features

OmniMount OS50FM Full Motion TV Mount for 13 to 37 Inches TVs, Black

The OS50F is a low-profile, easy-to-use small TV wall bracket. Take the guesswork out of choosing the perfect mount! With a capacity of 50 pounds, it is compatible with most any TV or monitor up to 37 inch on the market today.

Product Benefits

- Low 1.1 inch (28 millimeter) mounting profile.

- Lift n’ Lock allows you to easily attach your TV to the mount.

- Adequate spacing between TV and wall allows for cooling.

- Provides ample room for cables and wires between TV and wall.

- Durable powder coat finish.

- Simple to install and use.

- Ships fully assembled.

- Includes adapters for greater VESA compatibility.

- Includes complete hardware kit.

Product Specifications

- Fits most: 13–37 inch TVs

- Supports up to: 50 pounds (22.7 kilogram)

- Mounting profile: 1.1 inch (28 millimeter)

- VESA compliance: 75 x 75 to 200 x 200

- Mounting: Single-stud or solid wall

- UL listed: Yes

- Warranty: 5 years

- Color: Black

The OmniMount Story

It seems that every day a new company appears on the scene touting its expertise, experience, and business acumen in the world of TV mounts, furniture, and accessories. TVs are big investments and if treated with care, should deliver many years of entertainment. We urge you to trust your investment to a company who has a proven track record (in our case over 35 years) of offering great products, standing behind them, and continuously innovating to meet the needs of our valued customers. As an American company employing hundreds of people in the U.S. and abroad, we hope you will support us and our employees just as our products robustly support your valued TVs, speakers, and A/V components.

Founded in 1978, OmniMount holds a position as global leader in product innovation. OmniMount honed its skills as a pioneer in the field of audio mounts, and it continues to build on its strong foundation and heritage. As the once separate worlds of hi-fi and video have fused into home theater, the company’s scope has greatly expanded to incorporate a complete portfolio of solutions, including TV mounts, AV wall shelves, wire management products, AV equipment rack enclosures, digital signage mounts, audio products, and more.

• Supports two TVs for back-to-back mounting for either portrait or landscape orientation
• Tension adjustment for variable tilt or locking pin mechanism for precise positioning
• Integrated cable management routes cables through NPT pipe and ceiling plate (included)
• Lift n' Lock for quick installation and anti-theft security feature
• Threaded bottom pipe for additional accessories

User questions & answers

Question:	Does this mount swivel/rotate? Thanks
Answer:	Need to buy a NMEA 2000 kit for the point-1
Question:	Can you attach an accessory shelf to hold a cable/satellite box on this mount
Answer:	It comes with the Point -1 GPS Receiver with attached 4 foot cable. Comes with a plastic pole mount, which is like an extender to raise antenna above surface of boat a few inches. Comes with a NMEA T connector but you will need a NMEA network system to connect to. Comes with mounting hardware (two screws), a gasket seal and installation instruction manual. For this antenna to work correctly, you must do a on the water compass calibration.
Question:	I want the product to penetrate the ceiling drywall and be affixed to the joist above. Your description and illustrations do not describe attachment
Answer:	Don't remember having one. Just conect it to the backbone ande it will work. There was a little pamphlet for mounting and plaement. Not much of a manual tho.
Question:	is the height adjustable
Answer:	Sorry. I don’t know what an LCX 28c is.

Product description

Take the guesswork out of choosing your perfect mount! The OC40FMX is a single-arm full motion mount with extra extension that is compatible with most TVs 13 up to 37 inch on the market today and supports up to 40 lbs of weight.

• Tilt, pan and swivel for maximum viewing flexibility and the arm extends 14 inches from the wall when in use and retracts to 3.2 inches when not in use
• Integrated cable management and plastic covers hide wires.Mounting profile: 3 inch (7.6 cm) maximum extension: 12.16 inch (30.9 cm)
• Lift n' Lock allows you to easily attach your TV to the mount
• Two-tone design and modern aesthetic complement newer TVs
• Includes adapters for greater VESA compatibility

User questions & answers

Question:	How do you get the tilt tension mechanism to tighten on the oc40fm? tv does not lock in positions
Answer:	No, they are uniform in thickness throughout. One thing I have noticed, though, is that the upper toe area as already getting a bit thin where my toenails contact the sock.
Question:	How many apps can it handle
Answer:	Yes, they are thinner. Good sock but, not as good as the older version of the UA Hitch Heavy.
Question:	How much memory does tv has
Answer:	No, the sock are not water proof
Question:	does this work with a 37" vizio
Answer:	One per pack. They're worth it.

Product features

OmniMount OC40 Series Wall Mounts

The OC40 Series mounts provide high-quality, low-profile mounting solutions for medium to large thin profile TVs. Available in Fixed, Tilt, and Full Motion. Makes positioning a TV smooth and easy while ensuring that it stays in the desired place. OC40 mounts provide ample room for cables and wires between TV and wall while allowing space for cooling. All OC40 mounts feature OmniMount's Lift n' Lock easy 3-step installation. Quality craftsmanship ensures a dependable performance for the lifetime of the product.

The OmniMount Story

It seems that every day a new company appears on the scene touting its expertise, experience, and business acumen in the world of TV mounts, furniture, and accessories. TVs are big investments and if treated with care, should deliver many years of entertainment. We urge you to trust your investment to a company who has a proven track record (in our case over 35 years) of offering great products, standing behind them, and continuously innovating to meet the needs of our valued customers. As an American company employing hundreds of people in the U.S. and abroad, we hope you will support us and our employees just as our products robustly support your valued TVs, speakers, and A/V components.

Founded in 1978, OmniMount holds a position as global leader in product innovation. OmniMount honed its skills as a pioneer in the field of audio mounts, and it continues to build on its strong foundation and heritage. As the once separate worlds of hi-fi and video have fused into home theater, the company’s scope has greatly expanded to incorporate a complete portfolio of solutions, including TV mounts, AV wall shelves, wire management products, AV equipment rack enclosures, digital signage mounts, audio products, and more.