9 best mount brackets for dvds

Product description

Car Headrest Mount, Angle Adjustable Headrest Dual Screen DVD Player Mount, 2 Mounting Brackets for UEME/WONNIE/FANGOR Dual Screen DVD Player



【Special Customization】This car headrest mount works with UEME/WONNIE/FANGOR dual screen DVD player ranging from 7in to 10in. The holder will grip the device tightly, doesn't budge easily.



【Adjustable Viewing Angle】Up and down direction angle is adjustable, left and right angle is not adjustable.



【Easy to Install】Follow the guidelines provided, mount your dual screen dvd player on the headrest easily.



【Broad Compatibility】The reasonable design allows you install and adjust it without worrying the distance between two headrest poles and the diameter of the headrest pole.



【2 Sets of Brackets】1 for DVD player, 1 for monitor.

• 【Special Customization】This car headrest mount works with UEME/WONNIE/FANGOR dual screen DVD player ranging from 7in to 10in. The holder will grip the device tightly, doesn't budge easily.
• 【Adjustable Viewing Angle】Up and down direction angle is adjustable, left and right angle is not adjustable.
• 【Easy to Install】Follow the guidelines provided, mount your dual screen dvd player on the headrest easily.
• 【Broad Compatibility】The reasonable design allows you install and adjust it without worrying the distance between two headrest poles and the diameter of the headrest pole.
• 【2 Sets of Brackets】1 for DVD player, 1 for monitor

• Tempered Glass Shelf with a load capacity of 22lb
• This DVD Mount Bracket is designed-Inch attach-Inch the back of your TV in its VESA mount holes
• The bracket can fit on almost any TV with a maximum VESA mount size of 400x380
• Color: High gloss black
• Ideal for storing your cable or satellite box, DVD player or your Playstation/Xbox

User questions & answers

Question:	Can i attach this directly to the wall if i don't have a tv mount
Answer:	I have my cable box sitting on this mount and it about the same size as a PS4, so I am sure it would work.
Question:	Are there instructions on how to mount this on top rather than bottom
Answer:	Hello! Thank you for your question. Yes, this will work with the curved TV. The front of it is straight, so it might stand out a little from the TV, but it will work! Thank you!
Question:	What is the weight limit of bracket for TV
Answer:	Hello! Thank your or your question. Yes, this will fit if the TV is mounted to the wall! If there's 5" or more between the wall and the front edge of the TV. Thank you!
Question:	Will this mount work on an outdoor television and stand up to wind
Answer:	Hello, Thanks for your interest! VIVO is an American company headquartered in the USA, and this item is currently manufactured in China. We are confident you will be fully satisfied with the quality and functionality of this item. If you were to have any questions or concerns, please contact us right away as our dedicated Support team can offer specialized assistance with rapid response times!

Product features

Mount-It! LCD, LED, Plasma TV Wall Mount Bracket for Cable Box, DVD Player, Stereo Components Shelf (1 Shelf)

Mount-It! AV component shelving bracket is designed to store AV components above or under a wall mounted TV. The vertical brackets are installed between the TV and the TV wall mount and connect to the bolt holes behind the TV. The bracket can also be used above the TV for TVs that are kept on a TV stand. 



Ideal for storing cable boxes, soundbars, center channel speakers, receivers, DVD players, streaming devices and gaming consoles. 



High-strength steel and tempered glass offer 22 lbs of storage capacity. Sleek black gloss finish will complement your devices and decor. 

• ADJUSTABLE WALL MOUNT: Make sure to check the dimensions of your device to see if it will fit with our adjustable wall mount - Vertical Height: 6"-24", Vertical Length: 5.5"-20", Vertical Depth: 1.5"-3.75" - We offer smaller adjustable wall mounts if your device does not fit this one!
• EASY INSTALLATION: You’ll be able to install this wall mount quickly and easily - includes dry wall screws and anchors. After installing the bracket, simply tighten the bracket until your device is secure!
• TAME THE CABLE MONSTER: Hide your wires and boxes to enjoy a clean, organized TV setup. Our wall mount is perfect to pair with a mounted TV - just mount the device behind your TV!
• DOES NOT INTERFERE WITH REMOTE CONTROLS: Don't worry about your signal from your remote control being blocked! Infrared Signals remotes, Radio Frequency remotes, and Bluetooth remotes will still work with the device behind the TV - you can test your device by holding it behind a TV and having a friend try the remote.
• SATISFACTION GUARANTEED: If you have any problems with your adjustable wall mount, send it right back to us - no questions asked.

User questions & answers

Question:	Where is this made
Answer:	yes, instrument cables would work, but try to keep the length as short as possible for less distortion and aid in reduced attenuation.
Question:	I have a uverse box that is 11" high and your maximum for the small & wide unit is 10". is it really not possible for me to use the small & wide unit
Answer:	Yes
Question:	Can this be mounted in an enclosure
Answer:	Yes if you have the right patch cords. I made mine. Just Oder the plugs.
Question:	Do i have to worry about the cable box becoming too hot and starting on fire pressed against the wall
Answer:	If you mean oriented with the narrow back edge against the wall, then no, because the power cord and HDMI cord connect in the back and you would need a couple of inches of room for them. If you want to place the large, square bottom of the player against the wall so you are looking at the top, that would work.

Product features

Compatibility Information

This adjustable wall mount is custom designed to fit the following dimensions:

• Vertical Height: 6 - 24"
• Vertical Length: 5.5" to 20"
• Vertical Depth: 1.5" to 3.75" 

Note: If your device does not fit in the above dimensions, we offer other wall mounts for smaller components! 

Product description

HIDEit Uni-SW Mount (Black) - Adjustable Small+Wide Device Mount



After creating and patenting the first universal, adjustable device mount, we created this adjustable mount for your small, wide electronic components around the home from cable boxes and media players to routers and modems. Available in Black, Silver or White.



DEVICE COMPATIBILITY IS BASED ON SIZES. What size is your device? Works with small cable boxes, set-top-boxes, modems, routers, DVRs, and digital TV media players, but it all depends on the size of your device! Our Uni-SW has a vertical height of 5” and length of 5” with width adjustability from 1.7” at the smallest to 2.7” at the largest.



STEEL FOR ULTIMATE STRENGTH. Easy access to buttons and ports. Made in the USA from powder-coated, heavy gauge steel with modern manufacturing techniques to ensure superior quality. Open design allows full access to ports while keeping a low profile that won’t add any extra bulk to your device. If your device fits behind the TV without our mount, then you’re set to HIDEit!



Web Search #afterHIDEit to see more customer installations.



Got Questions? Get Answers!

- Open design allows convenient access to ports and cords.

- Infrared signals from IR remotes typically reflect off the wall to reach the cable or satellite receiver.

- Many new STBs utilize Radio Frequency (RF) or Bluetooth technology which does not require line of sight.



Want to know more?Reach out to us - we’re happy to help.



MADE BY THE EXPERTS. HIDEit is a total solution to vertically wall mount electronic components and video game consoles for the residential and commercial market. Privately held, we've been trusted by hundreds of thousands since 2009.

• ADJUSTABLE FIT. The HIDEit Uni-SW Wall Mount is adjustable to fit a variety of devices including cable boxes, routers, media players and more! Check the device's dimensions to ensure a snug fit. Height: 3-9", Length: 4-10“, Depth: 1.76-2.7”.
• HIDEit AND SAVE SPACE. Our Small + Wide Device Wall Mount makes it easy to HIDE messy cords and mount small devices behind your wall-mounted TV! So, ditch your bulky media cabinet and wall mount your devices for a sleek home media setup!
• REMOTE STILL WORKS. With the HIDEit Uni-SW there's no need to worry about signal interference! Infrared, RF, and Bluetooth signals will still work with the device mounted behind the TV - simply test your setup to determine the best mounting location.
• STEEL FOR ULTIMATE STRENGTH. Our Universal Wall Mounts are made from 16 gauge, cold-rolled steel for strength you can trust without unnecessary bulk. Powder-coat finish won’t rust or chip and protects devices from scratches.
• INSTALLit IN JUST 3 EASY STEPS. No complicated templates. Drill not required. Stud mounting optional. Includes flat head drywall screws, drywall anchors rated for 25 pounds each, and black thumbnuts.

User questions & answers

Question:	I need a smaller mount than the one for the Wii-U, will this unit work
Answer:	Hello, Thank you for your interest! Yes, this mount is compatible with a Samsung 50" TV. If you have any other questions, please contact us! Thank you! VIVO Customer Support
Question:	Does this fit the Hopper 3 through Dish
Answer:	It would depend on the size of the TV. For example this stand could be mounted approximately 12" from the wall corner and a 32' TV could be adjusted on the stand to be 45 degree with respect to both walls resulting in a nice corner fit. However, If you have a much larger TV (>32") the stand would not have enough length to adjust the TV to fit perfectly (45 degree) in the corner.
Question:	What about blocking air vents
Answer:	I have the same tv model , for this mount bought others screws .
Question:	can i mount it with mounting tape
Answer:	Here are the specifications listed: [COMPATIBLE with 23" to 55" Flat Screen TVs with up to VESA 400x400mm. The TV mount holds up to 66 lbs.] As far as size goes, YES. As far as VESA compatibility, you didn't list a specific model - so I don't know, but the chances are HIGH that you'll be fine as VESA 400x400 is the upper end of this mount's capability. As far as weight, again you didn't list a specific model - so if your TV is lighter than the above limit, then YES.

• TV Mount & Shelving Combo the ultimate space saving entertainment center that mounts off of the floor with a sleek and modern look
• Compatibility with 23" to 55" Flat Screen TVs with up to VESA 400x400mm. The TV mount holds up to 66 lbs, and the shelf supports up to 22 lbs thanks to high gauge cold rolled steel with tempered glass
• Tilt Feature adjusts 20-degrees in either direction allowing you to find perfect viewing angle, and integrated cable management is included to protect and organize cords
• Simple Setup and we provide all the necessary hardware to get your entertainment center assembled and mounted
• We've Got You Covered - Sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns.

User questions & answers

Question:	Is this product compatible with a Samsung 50 in tv
Answer:	It should work. The suction cups are smaller; however, it still works.
Question:	Can this stand be used in the corner
Answer:	Not sure, but it fits in standard size tub.
Question:	Is this mount not compatible with my tv? the top screws are a tad short. my tv is samsung model :un55ru800f
Answer:	I am not sure. I have been trying to get a new hand controller and have not received one yet.
Question:	is this compatible with my samsung
Answer:	I am not sure if it’s 250 or 300 pounds

Product features

Compatibility

This TV wall mount holds TV sizes 23" to 55" and has a weight capacity of 66 pounds. It is compatible with most TVs and fits VESA patterns 75x75mm to 400x400mm. Find the best viewing angle with +20 to -20 degree screen tilt and +90 to -90 degree TV swivel.

Compatilbility

MOUNT-VWSF1 comes with a tempered glass floating shelf, typically hung below the TV. With a weight capacity of 22 lbs and dimensions of 14" x 10", it is designed to hold DVD players, streaming devices, gaming devices, audio equipment, and more .

Cable Management

For a low profile, you can collapse the mount against the wall or fully extend it 15.5" from the wall to change the viewing angle. Keep your cords organized with built in cable management.

Why Choose VIVO?

Many ergonomic office solutions come at a high cost. Our mission is to use innovation, creativity, and efficiency to produce a more affordable solution that doesn't sacrifice quality.

We Make It Easy.

We want our products to be easily accessible to the millions of office workers around the globe so that comfort and productivity can brighten your day and strengthen your career.

We Care About Your Experience.

We don't just sell products... we sell solutions for needs encountered in the workplace. Our prompt and friendly service will ensure those solutions work for you.

Product description

The Impact Mounts DVD19 is designed for directly attaching to TV or TV mount with max. 400x400 VESA. It’s the perfect choice for holding DVD players/AV components up to 10kg/22lbs alternately above or below the displays, leaving no holes on the wall.

• Tempered Glass Shelf with a load capacity of 22lb
• This DVD Mount Bracket is designed-Inch attach-Inch the back of your TV in its VESA mount holes
• The bracket can fit on almost any TV with a maximum VESA mount size of 400x400
• Ideal for storing your cable or satellite box, DVD player or your Playstation/Xbox

User questions & answers

Question:	Are you able to purchase additional shelves to make it a double unit
Answer:	39 1/2 inches
Question:	What are the dimensions of the shelf
Answer:	short answer, no. I've used and will continue to use these but i would NOT remove them from the wall if you aren't prepared to at minimum repaint behind. In my opinion things like these aren't supposed to be removed from the wall and are "Set it and forget it". i removed one from the wall, it took up a lot of paint (to be fair it was pretty new paint) i scraped all the paint chips off the back of the adhesive AND 60-70% of the adhesive off the back ENTIRELY. let the product sit around for a couple weeks back adhesive exposed to dust etc. while i waited for my new cords to reuse it with. after ALL that it stuck to the wall securely a 2nd time with only 30% of its strip left. This is just an example of the strength on it. I recommend the product just saying if you are gonna pull em down regularly youd have to make adjustments like the command strips another comment mentioned.

Product description

This versatile holder offers an easy method for mount your TV box, AV components, computers, and video game consoles. Hide them behind your TV for a clean TV wall mount installation.

The universal design adapts to the dimensions of the box, while its mounting interface attaches to a variety of surfaces: a VESA plate, directly to a desk, clamped to a pole or fastened to Wall Track.

Rubber bumpers inside the bracket gently cradle the device yet allow space for ventilation. Securely clamps provides ease of access to ports and faceplate

• Save space mount your cable box or media player behind the TV; Open frame for easy access to your devices
• Adjustable mounting bracket accommodates small media devices from 1" to 2" wide
• Steel construction for strength and durability. Quick, easy, and simple installation.
• Endless integration options for wall, Pole, track, surface mounting, arm mounts, etc.
• Universal VESA interface attaches to any VESA mount that includes a 100 or 75 mm hole pattern; Loading capacity up to 33 lbs

User questions & answers

Question:	Does this piece come with mounting hardware
Answer:	This one has easy switch between 33 and 45 with a push of a button On Debut Carbon you do it manually
Question:	What material is this made of
Answer:	It will connect to almost all Soundbars on the market. More precisely: Our T1 BT will connect to every Soundbar which can handle SBC. This is the most common Codec used nowadays. Best Pro-Ject Audio Systems
Question:	Can I put small blu-ray player in it
Answer:	Thanks for your question. The Pro-Ject turntables are all manual. Audio-Technica offers semi-automatic models that either lift or lift and return at the end of the record. World Wide Stereo is 40 years old and a proud authorized Pro-Ject and Audio-Technica dealer.
Question:	I have a console device that has a height of 2.7 inches. Is there an extender incl'd with the product to extend the size to meet my box size
Answer:	There are better amps but for the price it does what we need it to do in our Cross Fit gym.

• Top Shelf Mount 12-inch wide clamping platform creating simple storage for speakers, gaming consoles, dvd players, and more
• Tool-less Installation with the rotary knob design. Shelf can be mounted in just seconds
• Ventilation is built into the platform providing airflow for heat sensitive devices
• Anti-skid Padding prevents items from scratches and sliding around
• Flocked Inside Fabric protects your TV's bezel and display from scratches

User questions & answers

Question:	Will a PS4 fit on this for on top of tv
Answer:	This also works for the Wii and Wii U
Question:	Can I put this on a curved tv
Answer:	Sorry have no idea what's a hopper 3. I have 1 for my Samsung blue ray DVD player and 1 for my big cable box.
Question:	Can this fit if the tv is mounted to the wall? I’d like to fit my blu Ray
Answer:	It depends on where the vents are on the component. You can move the component to the left or right. Of course, it will not be centered, but your component may get more air flow.
Question:	Where is the item manufactured? Thanks
Answer:	I tried using mounting tape yesterday. Worked for a few hours. What happened was that the heat generated by the cable box softened the adhesive, so we were greeted by a huge THUNK when the whole thing fell to the ground. I considered re-mounting it while cold to allow the adhesive to "set" first but decided to stop messing around and mount it with screws.

Product features

Sturdy Steel Frame

Keep your accessories safe and secure with this sturdy 12 x 5 inch platform that's able to support up to 4.4 pounds of weight. A TV screen thickness of at least 1/2 inch is recommended.

Rotary Knob Design

A simple rotary knob design makes this TV shelf easy to mount in seconds without any tools necessary. Simply place the shelf where you want it, and then enjoy the perfect storage space for your favorite smaller accessories.

Optimal Ventilation

Open slots in the platform provide excellent ventilation and cooling for heat sensitive devices.

Anti-Skid Padding

Protective padding covers the shelf surface to prevent scratches and keep your accessories from sliding. Inside padding is also included to protect your TV.

No Assembly Required

This shelf comes ready to use in seconds right out of the box!

• ADJUSTABLE WALL MOUNT: Check the dimensions of your device to see if it will fit with our adjustable wall mount - Vertical Height: Maximum 10" (no minimum), Vertical Length: 3.5"-10", Vertical Depth: 1.3" to 1.8" - We offer wide adjustable wall mounts if your device does not fit this one!
• EASY INSTALLATION: You’ll be able to install this wall mount quickly and easily - includes dry wall screws and anchors. After installing the bracket, simply tighten the bracket until your device is secure!
• TAME THE CABLE MONSTER: Hide your wires and boxes to enjoy a clean, organized TV setup. Our wall mount is perfect to pair with a mounted TV - just mount the device behind your TV!
• DOES NOT INTERFERE WITH REMOTE CONTROLS: Don't worry about your signal from your remote control being blocked! Infrared Signals remotes, Radio Frequency remotes, and Bluetooth remotes will still work with the device behind the TV - you can test your device by holding it behind a TV and having a friend try the remote.
• It is perfect for Apple TV (4th Generation), Amazon Fire, Roku and many other popular media players

User questions & answers

Question:	I need to relocate this mount what size are the dry wall studs?? so I can get more
Answer:	I just screwed this mount into a stud. You can use any size “molly or anchor bolt” to fit your needs.
Question:	What DVD player works with this to be mounted sideways
Answer:	I have two different ones, did not buy anything special. I believe most DVD players can be turned sideways. We slide it out, place dvd in.
Question:	can i fit an external WD hard disk with the Wide one
Answer:	All the measurements are included in the product description. If it's between 1.85" and 2.99" then it should fit.
Question:	what's the distance between the two horizontal mounting holes? need to mount it behind my monitor, distance should be 4 inches
Answer:	It is 1.5” between two vertical holes. You can actually using just one hole. It should be able to handle the weights

Product features

Compatibility Information (NARROW VERSION)

This adjustable wall mount is custom designed to fit the following dimensions:

• Vertical Height: Maximum of 10" (no minimum)
• Width: 5"
• Depth: 1.3" to 1.8" NARROW VERSION
• Weight Support: 11 LBS

Adjustable Depth

Adjustable to fit a wide range of media players, cable and satellite boxs. The range is from 1.3" to 1.8"

Open Construction

Open construction provide easy access to power button, output jacks and cable on either side

Adjustable Knobs

Adjustable knobs to allow you to easily adjust depth of mount

Easy Installation

4 mounting holes for quick and easy Installation

Mount Apple TV

Mount Media Box

Mount DVD and Blu Ray

Other Small Devices

AT&T U-verse boxes, Comcast Xfinity Set boxes, Nintendo Wii, Select Roku Devices, Blu-Ray Players, Tivo Mini, Sling TV Boxes, Charter Spectrum boxes, Panasonic Audio boxes, Verizon Fios Boxes, Directv Receivers, Dish DVRs, NVR boxes,Sonos port