13 best floor monitors

• Package Includes: Rockville RSM15A 15" 2-Way Powered Active Floor Monitor Speakers Totaling 2800 Watts. Rockville RSM15A15 1400 Watt 2-Way Powered Active Stage Floor Monitor Speaker. 350 Watt RMS / 700 Watts Program Power / 1400 Watts Peak. High power 15'' woofer with 3 KSV voice coil provides incredibly deep bass and acoustic power
• A microphone / line selectable input gives you the flexibility of plugging in a mixer signal, microphone, keyboard, or your guitar. LINK OUT connection via combo balanced XLR TRS preamp output for multi speaker setup. LED Power and Clipping LED Indicators. Frequency Response: 45Hz-20KHz. Maximum SPL @1w/1m: 96dB peak
• High-power 2-way pro sound stage monitor speaker system for live sound and playback applications. Wedge shaped enclosure provides the perfect angle for stage monitoring use.. Compact and light weight system delivers distortion free sound even at extreme SPL. Great power to weight ratio. Linear Class AB amplifier technology: high power, transparent sonic performance
• Internal switch-mode power supply for low distortion audio with superior transient response. State-of-the-art 1.75'' titanium diaphragm compression horn driver for crystal clear high frequency reproduction. Ultra-wide dispersion, large-format Elliptical wave guide horn. Custom Molded Steel Grill. Ergonomically shaped handle for easy carrying and setup. Aviation Grade Black Carpet
• Rubber Isolating Feet. Mic / Line level control. Built-In 3 band Equalizer allows you to control High, Mid, and Low frequencies to attain your preferred sound. 300Hz to 5KHz Feedback frequency filter. Adjustable feedback filter. Balanced ultra-low noise Mic / Line input via combo XLR & 1/4'' TRS jack. Balanced line output via combo XLR & 1/4'' TRS jack

User questions & answers

Question:	Both of them have amp
Answer:	As long as it’s an 8 ohm speaker, then yes.
Question:	Am i able to swap out the subwoofer with another subwoofer? (For example i accidentally blew subwoofer and wanted to replace it by myself am i able to
Answer:	1400 watts each together 2800 watts they put out great sound
Question:	are these speakers really 2800 Watt
Answer:	Yes, but you’ll need an adapter to convert stereo line level to mic / instrument level, or run it through a mixer board.
Question:	And also am i able to hook this set to my computer if i wanted to
Answer:	I only see one input and one output. However if you wanted to use it for multiple inputs, you could simply use a small unpowered mixer and take a line out of the mixer and go into the input of this speaker and adjust the levels of your mic and keyboard from the mixer.

Product features

2) Rockville RSM15A 15" 2-Way Powered Active Floor Monitor Speakers 2800 Watts

Package Includes:

• Rockville RSM15A 15" 2-Way Powered Active Floor Monitor Speakers Totaling 2800 Watts

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RSM15A



Looking for a top-of-the-line powered monitor solution? The Rockville RSM15A is an incredible solution to your stage monitor needs. With a built-in 350-Watt RMS / 1400-Watt peak amplifier and all the latest features, this powered monitor sets a new standard.

Cabinet Construction

The cabinet is constructed of high quality MDF and features a thicker front baffle for added stability. The composition and materials were chosen for their high strength, light weight, and anti-vibration characteristics. Skilled technicians assemble each cabinet by hand. The cabinets are finished in aviation grade heavy-duty carpet. Steel grills protect the drivers and recessed carry handles make it easy to transport.



A compact speaker with tons of functionality

The Rockville RSM15A packs a single power amp for the 15“ Low Frequency and 1.75” High Frequency drivers for a total of 1400 watts of peak power in a 40-pound package. This Rockville speaker features a 3-band EQ, XLR and 1/4“ inputs, a feedback filter, low weight, and much more. Exclusive horn design delivers ultra-wide 70-degree x 50-degree sound dispersion.

A flexible unit for all your monitoring needs

You can connect a variety of signals to the Rockville RSM15A, making it a very flexible speaker. Use multiples of them for your main monitor system. Use it a keyboard amplifier. Or pole-mount them and use them as your main speakers. With 1400 watts of peak power there is enough power to use the Rockville RSM15A for all your needs.

A built-in adjustable feedback filter to help squash annoying feedback that can creep up when using mics in close proximity to a monitor. Get the monitor coverage you need with the Rockville RSM15A!

A mic/line input gives you the flexibility of plugging in a mixer signal, microphone, or keyboard.

Add an affordable high-performance powered monitor to your Pro setup with the Rockville RSM15A.

Features:

• Rockville RSM15A 15“ 1400 Watt 2-Way Powered Active Stage Floor Monitor Speaker
• 350 Watt RMS / 700 Watts Program Power / 1400 Watts Peak
• High power 15'' woofer with 3“ KSV voice coil provides incredibly deep bass and acoustic power
• A microphone / line selectable input gives you the flexibility of plugging in a mixer signal, microphone, keyboard, or your guitar
• LINK OUT connection via combo balanced XLR – ¼” TRS preamp output for multi speaker setup
• LED Power and Clipping LED Indicators
• Frequency Response: 45Hz-20KHz
• Maximum SPL @1w/1m: 96dB peak
• High-power 2-way pro sound stage monitor speaker system for live sound and playback applications
• Wedge shaped enclosure provides the perfect angle for stage monitoring use.
• Compact and light weight system delivers distortion free sound even at extreme SPL
• Great power to weight ratio
• Linear Class AB amplifier technology: high power, transparent sonic performance
• Internal switch-mode power supply for low distortion audio with superior transient response
• State-of-the-art 1.75'' titanium diaphragm compression horn driver for crystal clear high frequency reproduction
• Ultra-wide dispersion, large-format Elliptical wave guide horn
• Custom Molded Steel Grill
• Ergonomically shaped handle for easy carrying and setup
• Aviation Grade Black Carpet
• Rubber Isolating Feet
• Mic / Line level control
• Built-In 3 band Equalizer allows you to control High, Mid, and Low frequencies to attain your preferred sound
• 300Hz to 5KHz Feedback frequency filter
• Adjustable feedback filter
• Balanced ultra-low noise Mic / Line input via combo XLR & 1/4'' TRS jack
• Balanced line output via combo XLR & 1/4'' TRS jack
• Amplifier clip limit LED indicator & power LED indicator
• Impedance: 4 Ohm
• 115 / 230 Volt switchable power supply with external user serviceable fuse
• Dimensions: 18.6“ x 15.5” x 25.3“ (L x W x H)

 

Product description

• Professional 800-Watt 2-Way floor monitor (200 Watts Continuous / 800 Watts Peak Power)
• Exceptional sound quality, wide frequency bandwidth and dynamic range
• Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
• Proprietary 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
• Proprietary horn design for ultra-wide sound dispersion

User questions & answers

Question:	What is the cabinet make out of? Plastic or dense cardboard
Answer:	No, it is passive, and receives its power from an amplifier via a Speak-on connection. If your amplifier only has a 1/4" jack, you can buy a cable that has a 1/4" jack into amplifier and Speakon cnx on the other end. I'm out of town at the moment, don't recall if it's M or F.
Question:	Is this an active speaker
Answer:	This is a powered speaker that sits on the floor, not on a stand. It is tilted at an angle to direct the sound up and out, which makes it useful by design for any musician or singer, or subgroups of same on stage, to hear their output without using headphones, and is powerful enough to cut through the volume of the main speakers. This does not mean its use is limited to that purpose; it can be directed to the audience instead of the performers with the intent of serving in place of generally larger main speakers in smaller venues, whether inside or outside. Because this particular speaker is self-powered rather than being powered by a separate amplifier, its output volume can be controlled right at the unit or in conjunction with a separate mixer and/or DI box. It should not be hooked up on a powered circuit from a separate amplifier. Most decent amplifiers have both powered amplified and unamplified terminals, which use different types of speaker cables. Make sure you understand the three basic types: instrument cables, unpowered speaker and powered speaker, as they are all constructed differently and generally should not be interchanged.
Question:	what is the purpose of a floor monitor? If it is for singer to hear ones self while karaoke how do you contol it
Answer:	Obviously wrong product description, the points next to the pic are correct as stated.Professional 800-Watt 2-Way floor monitor (200 Watts Continuous / 800 Watts Peak Power)Exceptional sound quality, wide frequency bandwidth and dynamic rangeExtremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic powerProprietary 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproductionProprietary horn design for ultra-wide sound dispersion
Question:	I'm confused, according to Behringer the VP1220F is a floor monitor with 12" woofer and 1.75" tweet. This product page talks about the VS
Answer:	In a small room, you will experience feedback noise when your volume is high because the sound will easily bounce from walls and ceiling and feedback to the microphone. When I moved to a larger area, feedback noise did not appear even at max. volume. So volume level needs to be adjusted depending on the area you are using. I love this thing!!

• Compatibility - Single monitor mount specifically designed for standing, fitting most screens 13” to 27” in size and 22 lbs in weight with 75x75mm or 100x100mm backside mounting holes. Cable management is included to keep cords clean and organized
• Ergonomic Viewing - Designed to elevate your monitor to a standing height, encouraging better posture for your neck and back while working long desk hours
• Full Articulation – Adjustable bracket offers 45° tilt, 90° swivel, 360° rotation, and height adjustment along the center pole. Note: Height adjustment requires loosening and tightening the bracket bolt and is not designed for fluid, frequent vertical movement. Monitor can be placed in portrait or landscape orientation
• Easy Installation - Mounting your monitor is a simple process with the open top slot VESA plate system. We provide all the necessary tools and hardware for easy assembly
• We've Got You Covered - Sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns

User questions & answers

Question:	Can this support 34 in ultrawide lg 34ub88-p in portrait
Answer:	Thanks for checking! This single monitor free-standing mount fitting most screens 13” to 32” in size and 17.6 lbs in weight with 75x75mm or 100x100mm backside mounting holes. I do apologize as this can not support 34" monitors.
Question:	My BenQmonitor is one inch too high for my needs, so my objective with a replacement stand is to lower it by an inch--What is the lowest stand height
Answer:	Hello, Thank you for your interest! This stand's height can be adjusted along the pole. If you would like you can mount the monitor as close to the base as you would like. Thank you,
Question:	does the stand come with screws
Answer:	Hello, Thanks for your interest! Yes, the stand comes with all hardware needed for assembly and monitor mounting. Thanks! VIVO Customer Support!
Question:	What is the difference between the stand-v001h and stand-v001p? thanks
Answer:	STAND-V001P has a larger base and more flexibility for moving the monitor around. This stand is more compact, has a separating VESA plate for easier mounting, and has the option of bolting down to the desk if needed.Thank you!

Product features

Articulation

This stand features excellent articulation and a wide variety of viewing angle options. The mounting face offers 15° tilt, 360° swivel, and 360°rotation, allowing the user to set the monitor to their preferred viewing position. Monitors can be installed either in portrait or landscape layout. Each joint can be tightened or loosened to the desired fluidity of movement.

Solid support

The solid steel construction of the stand provides incredible stability and security to both the stand itself and your monitor.  The entire stand is supported by a solid steel 15.5” x 11” base. The bottom of the base features protective padding to prevent scratches to your desk. Total weight capacity for this stand is 22 pounds.

Removable VESA plate

Mounting your monitor is made easy with a detachable VESA plate system. Simply remove the VESA plate from the stand, mount it to your monitor with the provided hardware, and lastly slide the plate and monitor back onto the stand.

Integrated cable management

Keep messy A/V and power cords organized with STAND-V011H’s integrated cable management. The removable clip easily attaches to the center pole and keeps your cables from becoming unsightly or hazardous. The clip also duals as a convenient holder for your hex tools.

Why Choose Us?

At VIVO we are every bit consumers as we are engineers and creators. As the leading provider for desk and mounting solutions, we live for products that enhance and simplify everyday life at home or in the office.

• Model # - SA-10M (Set of 2) - 14” tall – 13.25” wide – 21” deep
• Woofer - 10” 2 way crossover w/ a 40 oz magnet & 2” voice coil. 100 Watts RMS – 200 Peak.
• Wired at 8 ohms. 45Hz –20KHz. Sensitivity: 95 db. Piezo Tweeter - 4x8
• 5/8 plywood front panel. Black carpet w/ black metal corners. Recessed handles. Metal Grill
• Input terminal with two 1/4" inputs. Dual ports. These monitors are new. One year warranty.

User questions & answers

Question:	do this monitors need an amp? what would be recomended
Answer:	Thank you for asking. These are passive speakers so they will need an amp to power them. Have a great day!
Question:	what kind of amp do i need for these
Answer:	Hello, thank you for your interest in the SA-10m monitors. The amp you need will depend greatly on your application. An amp that will provide 150 watts per speaker would be optimal. You could use the LE-3000 from Seismic Audio for these if you wanted. They would provide 350 watts per speaker, which is more than is necessary, but they will run as long as you keep from supplying too much power. Have a great day!!
Question:	Will it work with the monitors out of my yamaha mg10x power mixer? or should i just daisy chain this from my powered jbl eon speakers
Answer:	Hi Francis,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! This listing is for a pair of our SA-10M PASSIVE floor monitors. You will need a power amplifier to drive these passive SA-10M floor monitors. The Yamaha MG10X is a console mixer and does not feature a built in power amplifier, so I would not consider this Yamaha mixer to be a "powered" mixer. I can only find line-level outputs, i.e. XLR or 1/4" TRS. So, this means you can either use a separate power amplifier to power these floor monitors, or you can check out the active version of these speakers, our SA-10MT-PW, which can be viewed here:https://www.amazon.com/Seismic-Audio-SA-10MT-PW-Pair-Powered-Titanium/dp/B00CZRHOJQ/ref=sr_1_2?ie=UTF8&qid=1474037938&sr=8-2&keywords=sa-10mt-pwWith these SA-10MT-PW, you can either daisy chain them off of your powered JBL EON 15" speakers, or you can output from your Yamaha mixer's 1/4" monitor output and control them separately from the mains, from the mixer. Let us know if you have any questions.Thanks,Rusty
Question:	Do i have to plug in both holes
Answer:	No, You don't!

Product features

Seismic Audio Pair 10" Wedge Floor Stage Monitors Speakers

These monitors are great for vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. These can be used on any setup for full band or drum monitors. Each monitor contains one 10" speaker with a 40 oz. magnet and 2-inch voice coil on each one yielding crystal clear sound while rejecting extraneous noise. Each monitor is made with 5/8" plywood. 10" monitors are ideal when you floor space is limited or your drummer needs a dedicated monitor and doesn't have much room. These 10" monitors take up a very small foot print on your stage. The Seismic Audio brand was designed to make the professional musician, as well as amateur musicians, sound great. So, get ready for years of trouble-free, crystal clear sound!

SA-10M

This listing is for a pair of 10" passive wedge style floor monitors. You will receive two identical floor monitors, pictured and described above. Our SA-10M's are well-suited for use for DJs, vocals, PA systems, small DJ gigs, weddings, churches, and sound monitors. Well-suited as part of a full PA system.

Jack Plate & Inputs

The SA-10M is outfitted with heavy-duty jack plates that houses two 1/4" inputs and connect nicely in nearly any set-up that you have whether you have an evolving live stage or a home studio

Protective Hardware

Heavy-duty, rugged hardware protect our SA-10M monitors with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet.

Heavy-Duty Recessed Handles

n order to transport your monitors easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

• MOBILE COMPUTER CART: Easily roll your entire workstation from room to room with this mobile computer desk. The smooth rolling casters lock in place, keeping your workstation in place when needed.
• STANDING COMPUTER WORKSTATION: Stand up and move around throughout your day for a healthier way to work. This mobile standing desk is designed with your health in mind. Great for offices, medical, hospitals, in-home, classrooms and more!
• DUAL MONITOR CART ON WHEELS: Boost productivity with the full motion dual monitor mounts that tilt, swivel, rotate and adjust horizontally for a customized setup. Fits monitors 13 to 32 inches with VESA 75x75mm or VESA 100x100mm.
• HEIGHT ADJUSTABLE COMPUTER WORKSTATION: This rolling PC workstation features dual mounts that adjust from 42.5" to 63.5" from the floor, with 20" of keyboard height adjustment. The attached CPU mount adjusts to fit computer towers with widths from 4.75" to 8.5".
• Comes with a 5-year warranty, and our friendly, US-based customer service department will be happy to help you out during normal business hours.

User questions & answers

Question:	Can one use this without the keyboard tray and cpu tray attached? I want o behind a desk for then I am sitting, and a treadmill for a walking desk
Answer:	Yes. It needs assembled, so you just don’t put those parts on it.
Question:	if I have 27" curved monitors, will I be able to tilt the screens inward so that they meet eachother properly
Answer:	My model uses one monitor. It does tilt inwards. Please check with the manufacturer to insure that your model that's using two monitors can tilt the screens inward to meet each other properly.
Question:	What is the lowest height above the floor the keyboard tray can be mounted? I see the height range of the monitor arms, but not the keyboard
Answer:	You can set the keyboard all the way to the floor. There's an undocumented feature where you can swap / reverse the CPU and keyboard tray holders (they have same bolt and hook pattern.) This puts the computer up high; this is actually better for my use as I need to be able to easily connect into the CPU ports. It will be top-heavy like this but allows you to set keyboard at standard 30" desk height.
Question:	How big is the box it is packed in and can you assemble/de-assemble relatively quickly
Answer:	Box was about 60" x 12" x 18" and is ~50 lbs. Took me about an hour to assemble fully; it's designed with metal clips to hold things in place as screws are installed and is fairly well thought out, as these things go.

Product features

Mount-It! Adjustable Mobile Workstation with Dual Monitor Mount

Stand up and move around throughout your day for a healthier way to work. This mobile desk was designed with your health in mind. It features an adjustable dual monitor mount, retractable keyboard tray, a CPU holder, and smooth rolling casters for easy mobility. Both monitor and keyboard tray height can be adjusted separately, so you can customize for the most comfortable setup. Great for offices, medical facilities, hospitals, in-home, classrooms, and more!

Height Adjustable

Dual monitor mount can be adjusted from 42.5" to 63.5" from the floor. Keyboard tray has 20" of adjustment range.

Tilt Up & Down

Adjustable tilt function lets you tilt your monitors 30° up or down to reduce glare.

Portrait or Landscape

Quickly rotate your monitors between portrait and landscape orientation as needed.

Retractable Keyboard Tray

Keyboard tray slides in and out within 3.5" range. Includes padded wrist rest and mouse pad.

Expandable CPU Holder

The attached CPU holder adjusts to fit computer towers with widths from 4.75" to 8.5".

Product description

Sound Town 2-Pack CALLISTO Series 10" Passive Stage Monitor Speaker (CALLISTO-10M-PAIR)

The Sound Town CALLISTO-10M-PAIR includes two CALLISTO-10M monitor speakers. The CALLISTO-10M is an affordable passive 300 Watts stage monitor speaker with impressive quality and great portability. Inside the low-profile enclosure come one 10” powerful woofer and one high frequency piezo driver; the CALLISTO-10M stage monitor doesn’t only provide amazing sound quality but also delivers a wide sound coverage. Being able to hear well, the artists will love coming back to perform on your stage.

Sound Town CALLISTO-10M stage monitor speaker comes with two 1/4” jacks which make daisy chaining with other speakers a breeze. Engineers at Sound Town understand how important it can be when a speaker is portable and easy to transport and so the stage monitor is built as small form factor, with two recessing handles on both sides and it doesn’t take a lot of foot print on your stage either. Its rugged exterior with full metal grille and four metal corners holds up to road applications.

For a top-quality, affordable, low-profile stage monitor, check out the Sound Town 2-pack CALLISTO-10M speaker set.

• The speaker set includes 2-pack professional-grade passive 2-way stage monitor speakers with 150W RMS / 300W Peak (8-ohm) power handling capability
• Each speaker comes with one 10” high-quality woofer with one high frequency piezo driver and provides stellar and consistent sound quality
• 60Hz-20KHz frequency range; 100X45 degree wide sound coverage
• Easy daisy chaining with your PA speakers with parallel 1/4” jacks provided
• Rugged exterior with black carpet finish, heavy-duty metal grille and corners holds up to touring applications; easy to transport with recessed handles

User questions & answers

Question:	What are the dimensions
Answer:	Dear customer, Thank you for your interest in the Sound Town Pair of CALLISTO-10M monitor speakers. The speaker set includes two CALLISTO-10M monitor speakers, each of them has a dimension of 16.1 x 14.8 x 21.5" and weighs 22.9 lbs. Please let us know if you have any additional questions. Thank you,
Question:	Is it genuine
Answer:	No way to be sure but there are no knock-off indicators. Works well. Labels are complete and normal in every way. Quality is good to better. Good value but not cheap.
Question:	These speaker can play karaoke
Answer:	Dear customer, Thanks for your interest in the Sound Town CALLISTO series PA DJ speakers. The speakers work great for karaoke. Please be noted they are unpowered/passive speakers and will need to be powered by an additional power amplifier. Please let us know if you need anything else from us or how to set up the connection, we should be more than happy to help. Thank you,
Question:	Would this be good for the dm10 alesis drum set and does it come with the cable to hook it up to my modular and if not what do I need
Answer:	Dear customer, Thanks for your interest in the Sound Town CALLISTO series monitor speaker. The CALLISTO-10M is a passive PA/Monitor speaker and won't be the best fit for your drum. We do have a drum speaker coming on the way soon. Please stay tuned. Please let us know if you need anything else from us. Thanks again!

Product description

Looking for a top-of-the-line powered monitor solution? The Rockville RSM12A is an incredible solution to your stage monitor needs. With a built-in 250-watt RMS/ 1000-Watt peak amplifier and all the latest features, this powered monitor sets a new standard. Cabinet construction the cabinet is constructed of high quality MDF and features a thicker front baffle for added stability. The composition and materials were chosen for their high strength, light weight, and anti-vibration characteristics. NC routing machines are used to accurately cut and shape every part, in consistency With extreme close tolerances. Skilled technicians assemble each cabinet by hand. The cabinets are finished in aviation Grade heavy-duty Carpet. Steel grills protect the drivers and recessed carry handles make it easy to transport. a compact speaker with tons of functionality Rockville RSM12A packs a single power amp for the 12“ low frequency and 1 high frequency drivers for a total of 1000 watts of peak power in a 40-pound package. This Rockville speaker features a 3-band EQ, XLR and 1/4“ inputs, a feedback filter, low weight, and much more. Exclusive horn design delivers ultra-wide Degree x 50-degree sound dispersion. A flexible unit for all your monitoring needs you can connect a variety of signals to the Rockville RSM12A, making it a very flexible speaker. Use multiples of them for your main monitor system. You can also use it a keyboard amplifier or pole-mount them and use them as your main speakers. With 1000 watts of peak power there is enough power to use the Rockville RSM12A for all your needs. a built-in adjustable feedback filter to help quash annoying feedback that can creep up when using mics in close proximity to a monitor. Get the monitor coverage you need With the Rockville rsm12a! a mic/line input gives you the flexibility of plugging in a mixer signal, microphone, keyboard, or your guitar.

• Rockville RSM12A 12" 1000 watt 2-way powered Active stage floor monitor speaker. 250 Watt RMS/500 watts Program power/1000 Watts Peak
• High power 12" woofer with 2. 5" KS voice coil provides incredibly deep bass and acoustic power. A microphone/line selectable input gives you the flexibility of plugging in a mixer signal, microphone, keyboard, or your guitar
• Link out connection via combo balanced XLR - ¼ " TRS preamp output for multi speaker setup. Led power and clipping LED indicators. Frequency response: 45hz-20khz. Maximum SPL @1W/1M: 93dB peak
• High-power 2-way Pro sound stage monitor speaker system for live sound and playback applications. Wedge shaped enclosure provides the perfect angle for stage monitoring use
• Compact and light weight system delivers distortion free sound even at extreme SPL. Great power to weight ratio. Linear Class AB amplifier technology: High power, transparent sonic performance
• Internal switch-mode power supply for low distortion audio with superior transient response. State-of-the-art 1" Titanium diaphragm compression horn driver for crystal clear high frequency reproduction
• Ultra-wide dispersion, large-format elliptical wave guide horn. Custom molded steel grill. Ergonomically shaped handle for easy carrying and setup. Aviation grade black carpet

User questions & answers

Question:	Can I use it for keyboard and mic at same time (i.e. can I input from 2 sources
Answer:	I believe only a couple of days.
Question:	How long does it take to ship
Answer:	I don’t know, ours stopped working about 2 years ago
Question:	Will the 12” work to play drums against(heavy rock) and the drums not drowned out the speaker
Answer:	Not exactly sure what you mean however the speaker has an awful lot of power. It does not use any particular operating system if that's what you're referencing. It has a XLR and quarter inch output and input.
Question:	What os the rsm power on this speaker
Answer:	Yes

Product features

Rockville RSM12A 12" 1000 Watt 2-Way Powered Active Stage Floor Monitor Speaker

Looking for a top-of-the-line powered monitor solution? The Rockville RSM12A is an incredible solution to your stage monitor needs. With a built-in 250-Watt RMS / 1000-Watt peak amplifier and all the latest features, this powered monitor sets a new standard.

Cabinet Construction:

The cabinet is constructed of high quality MDF and features a thicker front baffle for added stability. The composition and materials were chosen for their high strength, light weight, and anti-vibration characteristics. CNC routing machines are used to accurately cut and shape every part, guaranteeing consistency with extreme close tolerances. Skilled technicians assemble each cabinet by hand. The cabinets are finished in aviation grade heavy-duty carpet. Steel grills protect the drivers and recessed carry handles make it easy to transport.

A compact speaker with tons of functionality:

The Rockville RSM12A packs a single power amp for the 12“ Low Frequency and 1” High Frequency drivers for a total of 1000 watts of peak power in a 40-pound package. This Rockville speaker features a 3-band EQ, XLR and 1/4“ inputs, a feedback filter, low weight, and much more. Exclusive horn design delivers ultra-wide 70-degree x 50-degree sound dispersion.

A flexible unit for all your monitoring needs:

You can connect a variety of signals to the Rockville RSM12A, making it a very flexible speaker. Use multiples of them for your main monitor system. You can also use it a keyboard amplifier or pole-mount them and use them as your main speakers. With 1000 watts of peak power there is enough power to use the Rockville RSM12A for all your needs.

A built-in adjustable feedback filter to help quash annoying feedback that can creep up when using mics in close proximity to a monitor. Get the monitor coverage you need with the Rockville RSM12A!

A mic/line input gives you the flexibility of plugging in a mixer signal, microphone, keyboard, or your guitar.

Add an affordable high-performance powered monitor to your Pro setup with the Rockville RSM12A.

Features:

Product description

The HD Nanit Plus baby monitor offers everything you need to monitor and track your baby, their sleep, and their breathing motion with a crystal-clear overhead view. The Nanit Plus camera sees everything happening in and around the crib, with stunning clarity. Nanit specializes in helping you help your baby sleep better by providing personalized sleep tracking, analytics and guidance right in your Nanit app. The floor stand lets you position Nanit behind the crib against the wall, or free-standing with the optional third leg.

• ALWAYS BE CONNECTED: Get a crystal clear HD bird's eye view of your baby, day or night from anywhere on your iOS, Android, Kindle Fire, or Echo Show device. Hear or speak to your baby with two-way audio. Listen while using other apps or even when your screen is turned off with background audio. Receive real-time sound and motion notifications with adjustable sensitivity. Plus, monitor the temperature and humidity of the nursery to ensure they're comfortable.
• SLEEP TRACKING & GUIDANCE: Nanit gives you your baby's sleep stats each morning, plus a timelapse highlight reel of their sleep, so you can rewatch their entire night in seconds. Get personalized, science-backed sleep guidance and tips from the world’s leading pediatric sleep experts, right in your Nanit app.
• MAKING MEMORIES, MADE EASY: With Nanit Memories, your Nanit camera captures your baby’s finest moments automatically right in your app. Celebrate fun moments and growth milestones every step of the way, wherever you are. Share with friends and family, and hold onto their Memories forever.
• SAFE, SECURE, AND HSA/FSA APPROVED: 256-bit encryption keeps your data safe, and two-factor authentication keeps your account secure. Invite the whole parenting team to access your camera, and with user permissions, you can control exactly what each user can see and do. Use your Health Savings Account or Flex Spending Account to purchase Nanit. Nanit includes one year of Nanit Insights sleep tracking and video history. Nanit comes with a 1-year limited manufacturer's warranty.
• AWARD-WINNING: CES 2020 Innovation Award, 2020 Business Insider's Best Video Baby Monitor, 2019 Forbes' Best Baby Monitor, 2018 TIME's Best Invention.

User questions & answers

Question:	Does this come with one year of Nanit Insights
Answer:	Yes, it does now. I purchased in February and my free month ran out in mid March. I think this is when it started to be offered for the year for free. I called customer service and they were wonderful and updated my insights.
Question:	Can you view with more than one phone
Answer:	Yes! Out of the box, up to three users can stream simultaneously from anywhere in the world. With a subscription to Nanit Insights, you can have up to 10 user accounts with streaming access.
Question:	Is the floor stand adjustable in case our crib is lower or higher than normal
Answer:	The stand is not adjustable, but it is hight enough - and the video is zoomable, so it should not be a problem. I know you didn't ask for that but one issue I'd warn about - they will do a lot of efford to make you sign for their paid subscription plan, that offers some perks - but was a little unexpected for such a gadget
Question:	What is the difference between this and the non-“plus” version
Answer:	The Nanit Plus has the added feature a speaker for 2-way audio, and in the near future, we'll be adding Nature sounds to the app.

Product features

Sleep

Take the guesswork out of baby sleep with custom coaching based on your baby's unique sleep data. Plus, with your baby's personal sleep dashboard and trends, understand everything from how long they slept, to how many times you visited them every night.

Breathing

By just adding *Breathing Wear, the Nanit Plus can "see" your baby's chest as they breathe in real-time, simply by reading the customized patterns on the fabric. Get alerts on both your app and camera should they ever need you, and feel more confident leaving them in the crib for the night. *Sold separately.

Memories

It's a digital scrapbook automatically generated from your baby's sweetest moments. Collect and share with loved ones every adorable memory and milestone.

Parenting Team

It takes a village. Securely share your baby's feed with grandparents or your nanny, and have the flexibility to adjust individual permissions to your liking.

Product description

Rolling Floor TV Stand Offers Excellent Mobility



Our TV trolley features caster wheels that make movement from one room to another easy.



Specifications: Fits 23"- 55" flat/curved panel LCD, LED, OLED, plasma monitors and displays TVs (23", 25", 29", 32", 34", 37", 40", 42", 45", 46", 47", 49", 50", 55" TVs)



Supports TV weight up to 55lbs



Fits VESA patterns: 400x400/400x300/400x200/300x300/300x200/200x200/200x100/100x100mm

( In inches: 16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4")



PSTVMC04 can work with most of the brands like SAMSUNG/SONY/LG/TCL/VIZIO/Hisense/SHARP/Toshiba/Panasonic/Philips and more



Your TV model has not been listed? Never mind. Our US-based customer support on call 7days a week to help you out!

• UNIVERSAL TV CART ON WHEELS our mobile TV cart fits most 23" to 55" LCD LED flat screen and curved TVs weighing up to 55 lbs This rolling TV cart fits VESA 100x100 200x100 200x200 300x200 300x300 400x200 400x300 400X400mm
• HEIGHT ADJUSTABLE TRAY comes with a sturdy media shelf to hold your laptop DVD player or gaming devices Distance from the floor to the AV shelf is from 12" to 24" The wall mount plate can also be adjusted and you can easily choose the height you prefer to customize your viewing experience
• HIGHLY COMPATIBLE convenient for moving your TV around at home or in the office our TV stand meets your different needs Effortlessly move your TV from the living room to the bedroom Perfect for commercial use in shopping malls offices conference rooms trade shows hotels and more
• TIDY CABLE MANAGEMENT our built-in wire management solution in the metal column allows you to simply organize and conceal the wires and cables in back of the stand Also enables you to hide the cords without going through the wall and making holes
• ROBUST AND STYLISH DESIGN this TV cart stand with a 20 8”x15 7” base and four wheels featuring locking casters allows easy movability or stationary use when desired to ensure durability and added stability

User questions & answers

Question:	Will this tv stand allow me to run on a tread mill that is 60 inches high and still see a small (37 inch diagonal) tv screen
Answer:	They asked us to take a photo of damage. We repackaged it in the original shipping package and it was picked up .
Question:	Will this rolling tv cart work for a samsung un50nu6900 tv
Answer:	My chairs could not fit under the table. They were too wide but they look ok sitting close to the table at both ends. Chairs fit under the table on the sides.
Question:	Is the AV shelf able to be removed
Answer:	The Altin is 55”.
Question:	does it works good on carpet? my Tv is not too big is 33 inch length. and i would like to be able to move it from my living room to the nearest room
Answer:	Yes, it has an umbrella hole. After assembling, you have the option of leaving the "plug" in place or removing it. Removing it is a snap. Once removed, there is a hole for the umbrella. The hole has little plastic "teeth" to help hold the umbrella in place very well.

Product features

PERLESMITH MOBILE TV STAND - EASY TO MOVE YOUR TV AT WILL

AV shelf

Come with AV shelf can hold up to 22 lbs for laptops, DVD players or gaming system etc. to meet your needs

Lockable wheels

High quality caster wheels for smooth rolling anywhere without scratching the floor, and wheels are easily be locked to ensure the safety

Easy installation

Equipped with a detailed manual and all needed hardware in the package and it is easy to assemble your TV

PERLESMITH MOBILE TV STAND - EASY TO MOVE YOUR TV AT WILL

Looking for a flat screen TV rack that can be carted around an office,>

Our rolling TV stand features caster wheels that make movement from one room to another easy.

TV cart can be used in commercial environments to present company performance, upcoming events and other important information to employees. It is an ideal for businesses that want to bring their screen to different locations without having to purchase multiple televisions. This is also true for educational institutions. Schools are often under a tight budget and may require a limited number of displays, making these mobile TV stand an excellent option. Each mobile TV cart is made of sturdy steel, making them suitable for withstanding high traffic environments. In addition, it features an attractive black finish that will blend with any decor.

What additional features do our rolling TV stands come with?

Features shelving to carry electronics like laptops and tablets, allowing the screen's display source to be close by. Audio/visual carts provide ample room for projectors as well as multiple levels of storage space. Moreover, the shelves can be adjusted for extra convenience. Height adjustability, raising the TV to comfortable viewing levels.

Will this rolling TV stand fit my TV?

First, the weight of your TV should be less than 55lbs and your TV should be at least 23 inch.

Then, please check the VESA pattern. What is VESA? VESA is the mounting holes distance on the back of TV must be less than 16" (400mm) horizontally and 16" (400mm) vertically.

Finally, don’t worry about the bracket will block the plugs, because we provide the spacers solution in the package.

If you have a TV larger than 55" that you still need to mount, check out the PERLESMITH compare chart below. We are ready to provide the awesome TV carts at a great value, let your TV mounted to improve the viewing experience.

Product description

10inch Wedge Floor Stage Monitor or Speaker - Model - SA-10MSingle, 2-way 10inch pro audio speaker with 40 oz magnet and 2inch voice coil, 100 watts rms and 200 watts peak, 4x8 piezo horn tweeter, two 1/4inch inputs, Frequency Response: 45 to 20,000 hz, Wired at 8 ohms, 95 db, Dual ports, 18 gauge full face steel grill, Black Metal Corners, Pocket Handles, 13.25inch wide by 14inch tall x 21inch deep, Weight: 22 lbs per monitor, This monitor is brand new., One year warranty. It’s important that you can hear your music on stage. These 10 inch monitors deliver every sound clearly with a Pro Audio 10 inch speaker, 4"x 8"piezo horn tweeter, a frequency response of 45Hz to 20,000Hz, and 100 watts RMS, 200 watts peak power. Great quality monitors are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive one of these monitors pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Model - SA-10MSingle
• 2-way 10inch pro audio monitor with 40 oz magnet and 2inch voice coil
• 100 watts rms and 200 watts peak
• 4x8 piezo horn tweeter
• Input terminal with two 1/4inch inputs. Dual ports. One year warranty.

User questions & answers

Question:	Will it work on a yamaha EAD10 module for drums
Answer:	Hi,Yes it can however, you would need to have an external power amp to power the speaker as this is not a powered speaker and the drum kit will not provide the wattage or power to produce the speaker sound. Thanks
Question:	can this be used electronic drum kits
Answer:	Hi Lindsay, Mr. KenBJammen's comment is pretty much spot on. These SA-10M will be suitable for smaller venues and are ideal for monitoring vocals and guitars. As a drummer myself, I mostly want bass and rhythm guitar in my monitor, with other instruments sort of "salt and peppered" into my monitor mix. If you find that you also prefer to have more bass and rhythm in your mix as well, then you may be better served by a stronger 15" monitor, such as our SAX-15M or FL-15MP. The SAX-15M is visible on Amazon at the moment, but the FL-15MP are currently out of stock. Also consider, these monitors are passive and you will require a separate power amplifier to power them. If you do not select a suitable rated amplifier, in terms of the wattage, then you end up underpowering (or overpowering) the monitors and in either case, this will lead to blown woofers and tweeters. You may also want to consider a powered a.k.a. active monitor, with the amplifier already built in, but this all depends on any existing equipment you have and plan to use. Feel free to email us directly at [email protected] if you would like any additional information or have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment, so make sure to email us directly. Thanks, Rusty
Question:	Will I be able to hear while I’m playing drums
Answer:	Hello, thank you for your interest in the SA-10m monitor from Seismic Audio. Whether this will work on your stage will depend greatly on which musicians and guitar amps you have. I use this on stage with a fairly loud drummer, but a reserved guitar player with a single 12 combo. If you are dealing with someone with a Marshall half stack that "has to crank it to get his tone" it may not work.
Question:	Can this compete with a full band and guitar amps, if used as a vocal monitor on stage
Answer:	Yes. Has 'XLR in' and 'XLR thru' ports on the back

Product description

High quality cordless floor mat, features beveled edges and non slip surface, which helps to avoid slipping or catching with the foot or a walker. Floor mat sends a wireless to the alarm monitor which can be up to 150’ – 300’ feet away. Always test first to make sure monitor receives signal and to make sure you do not have anything that interferes with the signal. One of the great benefits of this system is that it allows the caregiver to relax and sleep, knowing they won't miss their patient trying to get up or go out! System operates on 3 C batteries, (not included) But to reduce the amount of batteries you will use for your alarm, you might wish to purchase an AC adapter for this alarm unit.

• Cordfree 24" x 48" floor alarm mat means there is no alarm noise in patient's room.
• When floor mat is stepped on, a signal is sent to the alarm monitor which has a radius of up to 150’ – 300’.
• Place the floor pressure mat by the side of the bed or across a doorway so you will know when they are trying to get up or leave a room.
• Alarm features three volume levels and an on/off switch. Approximately 5" tall and uses 3 'C' batteries. But to reduce the amount of batteries you will use for your alarm, you might wish to purchase an AC-04 adapter for this alarm unit.
• Reset the floor mat alarm using the “off” button on the alarm monitor.

User questions & answers

Question:	How much weight has to be applied before the alarm goes off
Answer:	Not much pressure is required to set off the alarm but it does seem to be "delayed" by about five to ten seconds. If your "patient" moves fairly quickly they may be already out the door before you can get to them. I also found after using this mat a couple of weeks that the alarm did not always sound. I don't know if the mat was defective or the wireless signal was faulty. I had to stop using the mat and switch to a wireless motion sensor.
Question:	I know you can turn the monitor off. Do you turn off the mat when not in use
Answer:	We do not turn off the mat. It is hard to get to, as it is in a pocket at the edge of the mat. You may be able to, but I would fear of forgetting to turn it on, and rendering it useless if you need it. The receiving unit we turn the alarm off. The adapter is well worth it for the receiving unit.
Question:	How do you program a second mat? The instructions are for a different product
Answer:	I only had one mat but i think if you call the seller Liberty Health Supply 1-800-991-6207 they can possibly help you.
Question:	Will Mom's big fat cat trigger the alarm
Answer:	I do not think so. It takes quite a bit more weight for the alarm to sound.

Product description

The GH12M is a 2 way passive wedge shaped monitor loudspeaker built from a 12 Inch High Output Mid/Low Ribbed Cone Woofer and a 1.5 Inch High Temp Multi Layer Copper Voice Coil mounted on a Wide Dispersion High Frequency 1 Inch Horn Tweeter for the highest quality sound. These components are housed in computer engineered MDF Acoustic Enclosure to get the most out of your speaker. The low end is enhanced by a Tuned Bass Reflex Enclosure to maximize the boom. A steel mesh screen is installed to prevent damage to the speaker and horn. The GH12M is rated at 350 Watts RMS and 700 Watts Peak to get maximum volume from this cabinet. It is wired at 8 ohms to make it easy to daisy chain additional speakers. The Grindhouse brand of Pro Audio gear is an affordable alternative to high priced audio gear. Do not be fooled by the price! Low prices do not always translate to a cheap product. Grindhouse Speakers are high quality product and produce a superb sound. Give them a shot and you will be happy you did.<>

• Model: GH12M-Pair
• Contents: Pair of 12 Inch Wedge Floor Monitors
• Active / Passive: Passive
• Power Rating: 350 Watts RMS | 700 Watts Peak each
• Impedance: 8 Ohms

User questions & answers

Question:	Will these work for electric drum kit
Answer:	Hi Ronald, Yes the Grindhouse GM12M 12" floor monitors can work with electronic drums, but you would need to use an amplifier to power these passive monitors, and it would be recommended to input your electronic drums into a small mixer console first. Thanks, Rusty
Question:	Will it manipulate directly with Multi effect processors
Answer:	Hi, These Grindhouse Speakers GH12M are passive 12" floor monitors. They will require a power amplifier to power them. You multi effect processors should be outputting a line-level type signal, which you should then be able to connect into the inputs of a power amplifier, then connect from the AMPLIFIED outputs of the power amplifier, to the input on each GH12M floor monitor. Let us know if you have any quesitons. Thanks, Rusty
Question:	What kindf of cable does these take, A 1/4" or what
Answer:	Hi, These Grindhouse Speakers GH12M 12" passive floor monitors will have a dual 1/4" jackplate that also has the red and black push lock style terminals for inserting raw speaker wire. You can connect into any jack, then the remaining jacks become an available output for daisy chaining purposes. Let us know if you have any questions. Thanks, Rusty

• UNIVERSAL FIT: This flat screen tv floor stand is compatible with most 13 to 42 inch televisions. It also supports VESA mounting up to 200 x 200. We've built this HD tv floor stand for maximum compatibility, giving you confidence that any tv in your home will fit.
• ADJUSTABLE HEIGHT: For when you need to find the perfect height and viewing angle in your home, during a tradeshow, or outdoors, this adjustable steel monitor stand can reach up to 52 inches in height using the built-in telescopic pin lock feature, and can tilt 30 degrees downward from the TV bracket.
• EASY INSTALLATION: Everything you need to get your tv, monitor, or screen mounted on this flat screen floor stand is in the box, and takes less than 10 minutes to put together.
• HEAVY-DUTY FRAME: Able to support up to 44 lbs, this floor base tv stand is built using high-grade cold-rolled steel. That means your television screens, panels, or monitors are safe and secure, no matter how long they're mounted for.
• SECURE STABLE BASE: Once your flat screen tv is mounted on this metal floor tv stand, the 18” x 20” wide solid steel base will keep it straight, stable, and wobble-free. Whether your screen is front and center or off to the corner, this tv floor stand features adjustable feet to level the frame so your panel isn't affected by uneven floors.

User questions & answers

Question:	How easy is it to adjust the height? Are tools required to do so
Answer:	Pretty easy but you do need a screwdriver. But the screen tilts so you don't really need to adjust the height. At least I haven't at all since I've been using it and I initially thought that'd be a problem.
Question:	I see that it tilts up and down but does it rotate
Answer:	No. The stand does not rotate.
Question:	Does the floor stand come with the hardware needed to mount tv to floor stand
Answer:	Yes, hardware to mount the tv is provided.
Question:	Can it be taken apart for transporting without removing the tv from the brackets
Answer:	Yes. Take the bolts out that are used to select the height of the TV and there you go. It will have the stem that fits into the upright still attached and might be a bit awkward if you are trying to pack. But you do not have to remove the TV from the bracket. Hope this helps.

Product features

Mount-It! Portable Floor TV Stand

Avoid drilling holes in your wall and place your TV in any space with this floor standing TV mount. The lightweight but sturdy construction makes it ideal for indoor or outdoor use. Telescoping height offers multiple height options for a custom setup. The adjustable tilt function helps reduce glare, and adjustable feet supports the stand on uneven floors. Great for restaurants, trade shows, malls, restaurants, hotels, bars, and cafes!

Telescoping Height Adjustment

Telescoping design offers 19.3 inches of preset height options, so you can find the height that works for you.

Adjustable Tilt

30 degree upward tilt helps reduce glare for the clearest viewing angle.

VESA Plate Extensions

Attach the extension plates to the mounting bracket to fit TVs with VESA bolt hole patterns 75x75mm up to 200x200mm.

Height Adjustable

This mount can be adjusted from 29.5 inches to a maximum 48.8 inches from the floor for a total adjustment range of 19.3 inches.