11 best doppler radar

Product description

Raymarine Quantum 2 Q24D Doppler 18In Radar w/ 15M Cable, T70417

• Radar, Quantum 2 w/ Doppler, 15m Cable

User questions & answers

Question:	Does this item include both the power cable and the data cable
Answer:	Yes
Question:	Does this come with the display
Answer:	No, this is just the radar dome.

Product description

HB100 microwave modules use the Doppler radar (Doppler Radar) design principles of the microwave moving object detector,it mainly used in automatic door control switch, security systems, ATM ATMs automatic recording control system, automatic train signals etc. HB100 is the standard 10.525GHz microwave Doppler radar.

.Type: Microwave Sensor

.Chip: HB100

.Frequency: 10.525GHz

.Voltage: DC 5V±0.25V

.Current: 40mA6.Size：length 37mm *width 45mm *height 8mm

• .Type: Microwave Sensor
• Chip: HB100
• Frequency: 10.525GHz
• Voltage: DC 5V±0.25V
• Current: 40mA6.Size：length 37mm *width 45mm *height 8mm

User questions & answers

Question:	can this detect my if im just sitting still
Answer:	Not really, active infrared would be far more reliable for your use case. Modulate an IR LED at about 1kHz and check the level received on an AC coupled photodiode.
Question:	How do you connect it to the Arduino? Are there pins or..? I'm very new
Answer:	YOu could connect it to the Analog inputs of the Arduino, and either write your own sketch, or look for one on the interwebs. The other option is to build the external signal processing circuit in teh datasheet, and connect that to one of the digital inputs that also drives a timer/counter and count the pulses to determine distance and speed. Probably your easiest, but maybe not the most accurate is to use the Analog inputs. I do recommend a simple voltage follower buffer between the HB100 and the Arduino input.
Question:	Is there a datasheet for this
Answer:	1. transmission frequency:. 10.525 GHz 2 frequency setting accuracy: 3MHz 3 Output power (minimum): 13dBm EIRP 4 Operating voltage:. 5V ± 0.25V 5 Operating Current (CW):. 60mA max, 37mA typical. 6 harmonic emission: 7 Pulse operating modes: 8 Average current (5% DC): 2mA typ. 9 Pulse Width (Min.): 5uSec 10 duty cycle (Min.): 1% Receive: 1 Sensitivity (10dB S / N ratio) 3Hz to 80Hz Bandwidth:-86dBm 3Hz to 80Hz bandwidth of clutter 10uV 2 Antenna Gain: 8dBi 3 Vertical 3dB beamwidth: 36 degrees 4 horizontal 3dB beamwidth: 72 degrees
Question:	What is the detection range of this sensor in terms of meters or feet
Answer:	Depends on the size and speed of your target. With an added microwave horn (made from aluminum foil), a preamp circuit (1 opamp), and a Arduino-type controller (Teensy T3.2) doing a FFT on the signal, I was able to detect a person walking at 2.2 mph out to 80 feet. I saw a pickup truck about 500 feet away (big flat metal things kick back a big radar signal). There's more info online, search for: HB100 teensy doppler radar processing

• Brand : Simrad
• Model NO : 80601
• UPC : 9420024173787

User questions & answers

Question:	Does this come with everything i need to hook this up to my evo3 nss
Answer:	www (dot) youtube (dot) com/watch?v=5vqSX40seqA&t=1540s
Question:	Will this work with HDS 7 touch
Answer:	The latest yearly Beckett price guide.
Question:	Is this compatible with the go7 XSE
Answer:	Series 1, Heritage, Inception & Opening Day are listed in the May 15th, 2020 / MJ cover guide (no Archives Signature Series Active Player or Gypsy Queen).
Question:	Will this work with the simrad go
Answer:	Yes,those years have listings. Years 1980-1988 have limited brands listed. 1989-present years have a much wider brand inclusion.

Product features

The Ultimate View for Collision Avoidance

HALO20+ radar delivers a full 360 degree sweep every second, thanks to its industry-first 60 RPM rotation at ranges up to 1.5 nautical miles. These ultra-fast updates give you an almost real-time view at close range, offering the ultimate view for collision avoidance of fast moving targets.

VelocityTrack Doppler Technology Built-In

VelocityTrack technology provides instant visual feedback on whether targets are coming towards you or moving away. Simple color coding highlights potential hazards, improving your situational awareness and further reducing your risk of collision. HALO20+ radar automatically checks every target in range; there’s no need to manually select individual targets, and no limit to the number of targets on screen at one time.

Product description

J.LUMI YCA2002 microwave motion detector is the next generation motion sensor. It works by emitting 5.8 GHz electro-megnetic waves and receive echoes bouncing off moving objects. It is capable of detecting even the slightest movement within its 30-ft range. The energy emitted is minimal and safe to use. Compared with traditional PIR motion sensors, microwave motion detectors are less likely to be affected by warm temperature, and could detect objects behind glass, wooden doors or think plaster walls.

• | MODERN DESIGN | This next generation motion detector has a clean and modern silhouette with a classic UFO shape. The body housing is made with premium polycarbonate material stronger than ABS plastic and gives a beautiful smooth finish. Standard white low profile allows this sensor to blend seamlessly into your ceiling.
• | MICROWAVE RADAR | Our microwave sensor emits microwave signals to detect moving object, the same way a radar speed detector works. It is more accurate and consistently outperforms a PIR motion sensor, which tends to be less sensitive in high temperature and over sensitive in low temperature.
• | FULL DETECTION CAPABILITY | Features 360-degree detection with 30-ft diameter detection range. Radar waves are capable of penetrating glass, paper, plastic and thin walls. Compared with a PIR motion sensor, a radar motion detector is less likely to be limited by place of installation, and could detect objects before they see the sensor.
• | PHOTOCELL ENABLED | With built in photocell operated by switch for daylight (24/7 mode) or night mode (only trigger after dark), making the sensor a perfect replacement of PIR sensors.
• | SAFE TO USE | This sensor emits microwave power at 10 milliwatt, which is 1/100 of a normal cell phone (typically 1-2 watts of power). Suggested install height is 8-12 ft., compared to a cellphone which is normally used within 3 ft. of your body. You can use this radar motion detector safely and with peace of mind. Please review wiring diagram to make sure wiring is done correctly.

User questions & answers

Question:	Can I use 12volt DC to run it
Answer:	I am not sure I have Simrad.
Question:	how much power does this consume overall
Answer:	Compatable with my GO7 XSR. If your not sure if you have the E or R check on your simrad if you have the radar option in the menu if you do then it'll work fine

Product description

Description:

1. Type: Microwave Sensor

2. Chip: HB100

3. Frequency: 10.525GHz

4. Voltage: DC 5V¡À0.25V

5. Current: 40mA

6. Size: Length 37mm *width 45mm *height 8mm

Application:

1. Automatic door startup

2. Car, House intrusion alarm

3. Collision warning

4. Traffic monitoring

• HB100 10.525GHz Microwave Doppler Radar Detector Probe Wireless Sensor
• Chip: HB100
• Frequency: 10.525GHz
• Voltage: DC 5V¡À0.25V
• Size: Length 37mm *width 45mm *height 8mm

Product description

Enhance your home security with Precision Plus Doppler Radar. Doppler technology provides lateral plus to-and-away motion detection. This fixture projects a bright 1900 Lumens with 180° of protection up to 70 ft. range, so you can see potential threats from further away.

• Hardwired Floodlight featuring wall or eave-mount installation
• 180-degree motion detection with up to 70 ft. range
• Integrated LED produces 1900 lumens with 180-watt equivalence
• Fixture is built to last with maintenance-free energy efficient LEDs with 35,000 hours of life (equivalent to 32 years at 3 hours per day)
• 1900 Lumens provides strong brightness to cover large surrounding areas
• 5000K daylight color temperature influences alertness and awareness, ideal for outdoor security applications
• Integral dusk to dawn photocell sensor provides nighttime on/ daytime off to ensure efficient energy usage to save you money

User questions & answers

Question:	how many horsepower
Answer:	Just vacuum on and power tool switch
Question:	Can i use the 18v XRP or or 18v li-on batteries with DEWALT DCV581H
Answer:	Yes it does
Question:	Bought mainly for cordless car and house clean up but the small non-QR 20v batteries only last 5-7 minutes. Can it work longer on any battery
Answer:	It’s 9 to 10 feet. I don’t know how many amps it draws.
Question:	What is it's fluid capacity
Answer:	I believe they’re referring to a button on the unit that you can push to blow air through the filter to clean it.

• DC+5v operating voltage, low current, low power consumption
• 24.1256HZ high frequency microwave/radar sensing
• High frequency devices, printed boards and high precision electronic components
• The farthest can reach 20M/360° diameter
• Induction

Product features

Feature

DC+5v working voltage, low current and low power consumption

24. 125GHZ high frequency microwave/radar sensor

Comply with FCC/TUV/CE/EMC standards

Use imported high-frequency components, printed boards and high-precision electronic components

Product induction consistency is stable and reliable, long-distance stable

Detection distance, the farthest can reach diameter 20M/360°

Detection Coverage

■Smart lighting

Stairwells, toilets, tunnels, underground garages, warehouses, garden streets

■Security and alarm control

Alarm, smart access control, smart CCTV, automatic voice warning broadcast

■Intelligent Internet of Things

Smart billboards, smart speakers, smart toys, smart toilets, smart logistics

Face recognition proximity induction microwave sensor

Advertising machine proximity detection microwave sensor

Smart street light microwave sensor

Automatic door microwave sensor

Product description

The RCWL-0516 is a Doppler radar microwave motion sensor module using the RCWL-9196 IC which can be used as an alternative to a PIR motion sensor such as the HC-SR501 or HY-SRF05. Instead of sensing changes in infrared emitted by a moving person, this sensor uses microwave Doppler radar to detect moving objects.

This mini radar motion sensor module is equipped with an RCWL-9196 IC based on the Doppler microwave induction technology. When triggered its trigger output pin will switch from (LOW) 0V to high (3.3V) for ~2 to 3 seconds before returning to its LOW state. It has a maximum 7 meter (~21 feet) detection distance with adjustable delay time and sensitivity. The detector is not affected by its surroundings, and can operate through glass and other obstructions, providing better performance than traditional infrared (PIR) detectors. It is perfect for DIY microwave motion sensor light switch, security systems, human sensor toys, etc.

The component side of the board is the main detection side and should face the detection area for maximum sensitivity, however, it will also detect from the back side at lower sensitivity. Do not place metal objects within 1 cm of the antenna.

Specifications

• Operating Voltage: 4V - 28V, 5V - 12V recommended
• Operating Current: 2.8mA (typical); 3mA (max)
• Maximum Detection Distance: ~7m
• Transmitting Power: 20mW (typical); 30mW (max)
• Output Control Low Level: 0V
• Output Control High Level: 3.3V
• Operating Temperature: -20~80 C
• Storage Temperature: -40~100 C
• Dimensions: 35mm x 17mm x 3mm

Package Includes:

   1x RCWL-0516 Microwave Doppler Radar Sensor Motion Detector Module Board

   Header connectors

   Printed operating instructions

• RCWL-0516 is a Doppler radar microwave motion sensor module using the RCWL-9196 IC which can be used as an alternative to a PIR motion sensor such as the HC-SR501 or HY-SRF05
• Uses microwave Doppler radar to detect human bodies and moving objects rather than infrared detection
• High sensitivity, 5-7 meter sensing distance, wide sensing angle, high reliability, wide range of operating voltages (4V - 28V)
• Widely used in human body sensing, auto-on lighting systems and anti-theft alarm systems
• Unlike traditional infrared PIR detectors, it can detect through glass, some walls and other objects

Product description

HB100 Microwave Doppler Radar Wireless Module Motion Sensor HB100, Microwave Motion Sensor, Motion Detector

• HB100 Microwave Doppler Radar Wireless Module Motion Sensor HB100, Microwave Motion Sensor, Motion Detector

Product description

Swing Caddie New SC 300 VC Portable Launch Monitor with Remote Control & SC300 Doppler Radar Technology

User questions & answers

Question:	Question for the manufacturer: i cannot "spin rate" see anywhere in the app after my first practice session. what am i doing wrong
Answer:	The description has: 85-265V AC. So I do not think it will work with 12V DC. I used 120VAC wiring and it works well.
Question:	Will this swing caddie work if you are hitting off a mat into a net
Answer:	In standby, just a fraction of power. In working mode, it depends on the load capacity. Less load less power and more load more power.
Question:	does this measure spin rate
Answer:	hi, friend This product cannot disable visible light. Sorry, it did not help you! Sincere regards!
Question:	does it factor wind
Answer:	Not sure about the evo3, but came with everything needed for my GO7 XSR. Check simrad’s website for compatibility if it is then you should be fine.

Product description

DEVMO3V3: 3.3V power output, can be used as a reference voltage or as a low current (less than 100mA) 3.3V power supply.

GND: Ground

OUT: Control output; when a moving object is detected, it will output high level 3.3V

VIN: 4-28V Input voltage

CDS: CDS photodetector output. NOTE: Not used, photodetector is not installed on the board. It can be added by the user for daytime/nighttime detection.

• ★RCWL-0516 is a technology that uses radar Doppler, microwave induction special module for detecting moving objects.
• ★High sensitivity, induction distance, high reliability, induction Angle is large, voltage supply range and other characteristics
• ★Widely used in all kinds of human body induction lighting and anti-theft alarm, etc.
• ★Wide fan operating voltagefrom 4.0 V to 28.0 V
• ★Compared to traditional infrared PIR sensor, penetration detection capability