10 best powerlead cameras for videos

• ★【Real Thick 18AWG】- Real 18AWG vs Common 22AWG, real 18AWG are bigger wire than other 22AWG pigtails, as it has heavy gauge with 43 pcs 0.14 mm 100% copper strands inside one cable, total 86 pcs 0.14 mm copper strands inside the two Red / Black cables. This makes the difference when using with bigger power supplies, and allows them to be used for higher current devices, they should be good to 5A or even a touch more with real 18AWG.
• ★【Safe & Rapid Transmission】- Heavy-duty quality with 43 x 0.14 mm 100% copper strands inside one cable brings the reliable, secure connection and rapid transmission. 18AWG DC Power Pigtail Cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box.
• ★【Easy Installation】- Easy to weld and install, as the ends of the DC power pigtail cables are pre-tinned making them super easy to solder. Also features two wires on the other Red Black wire jackets indicate polarity. They are fairly long too, 11" total, 9.5" of wire.
• ★【Compatibility】- Easy DC Power solution, compatible with all CCTV systems and other 2.1*5.5mm DC power devices like part lighting or led strips. Very versatile. This 18AWG DC Power Pigtail provide a very good reliable DC power connection.
• ★【What You Get】- 20 x Red/Black Male Pigtails DC Power Connectors, 20 x Red/Black Female Pigtails DC Power Connectors, our worry-free 12-month and friendly customer service.

User questions & answers

Question:	Hard to tell from the photos, but can someone confirm if the wires are real 18awg as advertised
Answer:	I would say yes. Being made in China, it has a wire size of 2xo.8mm2 that last number is squared. But next to some genuine 18 AWG monster speaker wire, it looks to be the same size.
Question:	Will the male and female connectors handle 5 amps? 60 watts
Answer:	Yes. I am using them on a DC power adaptor rated at 7 amps and connector doesn't even get warm. I'm powering a marine bilge vent fan with the adaptor.
Question:	how to connect to cctv
Answer:	Use wire nuts matching the red and black wires to positive and negative feeder wire from power supply . If in bad unprotected area a more permanent crimp connector will be better.
Question:	Would it be problematic to run 14 volt through these connectors? im trying to make a 14v lemo to dc adapter to run my camera
Answer:	The voltage is not as critical as the current the load requires. As long as the load current is less than current carrying capability of the conductor (a function of the type of conductor metal and wire gauge), it should work perfectly. You can find suggested current ratings for various wire sizes online.

Product features

Flexible & Durable

With new flame retardant / anti riot sun / antioxidant / anti-aging PVC plastic which is flexible and durable.

Heavy-duty quality with 43 x 0.14mm pure copper strands inside one cable brings the reliable, secure connection and rapid transmission. 18AWG DC Power Pigtail Cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box.

Real Thick 18AWG

Real 18AWG vs Common 22AWG, real 18AWG are bigger wire than other 22AWG pigtails, as it has heavy gauge with 43 pcs 0.14 mm 100% copper strands inside one cable, total 86 pcs 0.14 mm copper strands inside the two Red / Black cables. This makes the difference when using with bigger power supplies, and allows them to be used for higher current devices, they should be good to 5A or even a touch more with real 18AWG.

Easy Installation

Easy to weld and install, as the ends of the DC power pigtail cables are pre-tinned making them super easy to solder. Also features two wires on the other Red Black wire jackets indicate polarity. They are fairly long too, 11" total, 9.5" of wire.

Easy DC Power solution, compatible with all CCTV systems and other 2.1*5.5mm DC power devices like part lighting or led strips. Very versatile.

MILAPEAK CCTV Security Camera DC Male & Female Power Plug Pigtail Cable

Patch cable for surveillance cameras to connect to a power supply.

You may connect extra Battery pack with this cable or for CCD Camera installation. Most dome- or bullet-style surveillance cameras come with a short power cable but need a patch cable to connect to a power supply. Connect your camera to the power supply easily with the Male DC Power Pigtail, which has 9.5 inch of red and black color-coded wires along with a standard center-positive plug to connect easily to your camera.

• ★【Real Thick 18AWG】- Real 18AWG vs Common 22AWG, real 18AWG are bigger wire than other 22AWG pigtails, as it has heavy gauge with 43 pcs 0.14 mm 100% copper strands inside one cable, total 86 pcs 0.14 mm copper strands inside the two Red / Black cables. This makes the difference when using with bigger power supplies, and allows them to be used for higher current devices, they should be good to 5A or even a touch more with real 18AWG.
• ★【Safe & Rapid Transmission】- Heavy-duty quality with 43 x 0.14 mm 100% copper strands brings the reliable, secure connection and rapid transmission. 18AWG DC Power Pigtail Cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box.
• ★【Easy Installation】- Easy to weld and install, as the ends of the DC power pigtail cables are pre-tinned making them super easy to solder. Also features two wires on the other Red Black wire jackets indicate polarity. They are fairly long too, 11" total, 9.5" of wire.
• ★【Compatibility】- Easy DC Power solution, compatible with all CCTV systems and other 2.1*5.5mm DC power devices like part lighting or led strips. Very versatile. This 18AWG DC Power Pigtail provide a very good reliable DC power connection.
• ★【What You Get】-10 x Red/Black Male Pigtails DC Power Connectors, 10 x Red/Black Female Pigtails DC Power Connectors, our worry-free 12-month and friendly customer service.

User questions & answers

Question:	what would happen if you run 19.5v through these connectors ? would it last
Answer:	The voltage is less important than the amperage. 19.5 volts would be fine. I assume you are wiring part of a solar array assembly or installation? The amperage should be no more than 10 amps in any circuit that these would be connected to. To find amperage, divide your watts by your voltage.
Question:	Is the tip positive or negative on these.. ie Red to tip.. Black to barrel
Answer:	It really only matters that you try to consistently understand and implement and remember what way the socket is wired up. So what's Define the elements here. The male end has a tip and a shaft the female end has a center and a barrel. If you wire up your device with the red lead on positive and the black lead on negative regardless of whether or not the lead is male or female you will end up with the center or tip being positive and the shaft or Barrel being . However if you need the reverse effect meaning you require the center negative then you must hook up the black wire to the positive lead on your circuit and the red wire to the negative so that the socket now is no longer Center positive but instead is Center negative.
Question:	Would these handle 48volts at 1 amp. What about 2amp. 50 - 100 watts
Answer:	I wouldn't go past 5A, so the 1 to 4A range I feel would be safe. Remember that working at a higher voltage requires less amperage for the same amount of work. so what would be approximately guessing 1A at 48V would most likely be 4A at 12V assuming the device supported a wide voltage range. The only thing I don't like about the jack connectors is the tendency for the Jack to not make good contact which increases the resistance, I had to bend the pin gently to make contact with most of my stuff. I'm using 5Ah batteries and fusing at 5A and decided that 18 gauge worked out to be about 5A ampacity.
Question:	What is the awg ? so many recent prod reviews are calling the specs as outright lies... that the wire is 22 gauge at best. see 1 star reviews
Answer:	Hi YES it is really 18GA I am using these to extend power to single CCTV cameras rather than having to use an expensive POE (Power over Ethernet) Injector Powering IR (Infrared) Illuminators helps cameras see in the dark Just installed 3 backup cameras on 3 different vehicles used them to power the cameras as well as the 7" lcd screens Note: Before you strip them you need to clip off the tip of the copper wire they are soldered & the insulation on some of them is fused to the wire from the soldering heat

Product features

Flexible & Durable

With new flame retardant / anti riot sun / antioxidant / anti-aging PVC plastic which is flexible and durable.

Heavy-duty quality with 43 x 0.14mm pure copper strands inside one cable brings the reliable, secure connection and rapid transmission. 18AWG DC Power Pigtail Cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box.

Real Thick 18AWG

Real 18AWG vs Common 22AWG, real 18AWG are bigger wire than other 22AWG pigtails, as it has heavy gauge with 43 pcs 0.14 mm 100% copper strands inside one cable, total 86 pcs 0.14 mm copper strands inside the two Red / Black cables. This makes the difference when using with bigger power supplies, and allows them to be used for higher current devices, they should be good to 5A or even a touch more with real 18AWG.

Easy Installation

Easy to weld and install, as the ends of the DC power pigtail cables are pre-tinned making them super easy to solder. Also features two wires on the other Red Black wire jackets indicate polarity. They are fairly long too, 11" total, 9.5" of wire.

Easy DC Power solution, compatible with all CCTV systems and other 2.1*5.5mm DC power devices like part lighting or led strips. Very versatile.

MILAPEAK CCTV Security Camera DC Male & Female Power Plug Pigtail Cable

Patch cable for surveillance cameras to connect to a power supply.

You may connect extra Battery pack with this cable or for CCD Camera installation. Most dome- or bullet-style surveillance cameras come with a short power cable but need a patch cable to connect to a power supply. Connect your camera to the power supply easily with the Male DC Power Pigtail, which has 9.5 inch of red and black color-coded wires along with a standard center-positive plug to connect easily to your camera.

Product description

AimHD ---- We are aiming at High-Definition and High-Devoted

As a leader in security surveillance cabling and accessories for both businesses and homeowners, AimHD is committed to keeping an eye on the things you care about most. Our security cabling products are designed and engineered for ease of use, reliable, stable and cost effectiveness in mind for HD CCTV camera system

AimHD 10 Pairs Brand New Male & Female DC Pigtail for CCTV Camera Power Connectors, You can easily integrate these connectors to CCTV coaxial cables, enabling you to send power from compatible cameras to your DVR. This pack comes with 10 male 2.1 mm and 10 female 5.5mm connectors, they are a great addition to any electronic project you might have, from a CCTV camera system to a light up Halloween costume

Seller Warranty Description

All purchases include AimHD's One Year Domestic Warranty plus Lifetime Support. Enjoy peace of mind knowing that if your AHD-DC10-MF-PT ever stops working within a year of purchase, it will be replaced promptly from our US based operation.

Contact us if you have any question or concerns, a prompt service is guaranteed.

For the BNC Male Connectors for video cable extension, please search at Amazon with Asain: B01N5LIHD6 or B01MDMGJYC

• 〖UPGRADED〗 : Better constructed connectors with upgraded thicker copper wire and thicker isolation molding bring reliable and secure power connection
• 〖10 PAIRs〗: Includes 10 pack male(2.1mm) and 10 pack female(5.5mm) power pigtails DC barrel jack connectors with 10 inches tinned lead tails and red & black wire jackets indicate polarity
• 〖EASY POWER〗: Provides a simple and secure DIY solution for 1-36 V DC power connectivity, work with a power adapter or a power supply box
• 〖UNIVERSAL COMPATIBILITY〗: Compatible with all CCTV security surveillance camera systems and other 1v-36v, Max. 5a DC supply projects like party lighting or LED strips
• 〖100% QC & SERVICE〗: All products sold by AimHD passed strict 100% QC in detail with 2-year warranty, you''ll not be disappointed with our 7/14 service, 365 days technical support

User questions & answers

Question:	will these handle 12 volt dc motorcycle power
Answer:	Yes, it works with 12v, Max.5A DC application.
Question:	What wire gauge is "upgraded gauge 5a
Answer:	The minimum gauge wire for 5 amps of current is recommended to be 16 gauge wire. This may have been "upgraded" to 14 gauge wire - which would allow you about 20' run of wire.
Question:	why the first picture of the description is diffrent then the third one? one has the black tip and the other has a black tip, i preferred the black
Answer:	It's just upgraded with yellow tip as the mark for better connectivity on male, we're updating the picture, sorry for the confusing and thank you so much for your kind reminder.
Question:	What AWG is this wire
Answer:	It’s only 22 gauge

Product description

Reliable Quality:

Heavy-duty quality with 46 x 0.14mm pure copper strands inside one cable brings the reliable, secure connection and rapid transmission.

Daykit DC Power Pigtail Cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box.



DIY your power connectivity:

5.5 x 2.1 barrel connectors with pigtail leads used with video cables to connect to power supply for cameras, Heavy-duty quality brings secure connection.



Flexible & Durable:

With new flame retardant / anti riot sun / antioxidant / anti-aging PVC plastic which is flexible and durable.



Easy Installation:

Easy to weld and install, as the ends of the DC power pigtail cables are pre-tinned making them super easy to solder.

Easy DC Power solution, compatible with all CCTV systems and other 2.1*5.5mm DC power devices like part lighting or led strips. Very versatile.



Specification:

- DC Plug: 5.5mm*2.1mm

- Total length: 10inch

- Current: 5A (12V)

- Joint polarity: Red(Positive) / Black(Negative)

- Wire material: pure copper core (high quality oxygen free copper / non recovery copper)

- Joint material: arc quenched pure copper + galvanized (non iron head)

- Plastic material: new flame retardant / anti riot sun / antioxidant / anti-aging PVC plastic

• Daykit DC Power Pigtail Cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box.
• Heavy-duty quality with 46 x 0.12mm pure copper strands inside one cable brings the reliable, secure connection and rapid transmission.
• 5.5 x 2.1 barrel connectors with pigtail leads used with video cables to connect to power supply for cameras.
• With new flame retardant / anti riot sun / antioxidant / anti-aging PVC plastic which is flexible and durable.
• Male Pigtails DC Power Connectors Plug Lead Cord for DVRs, CCTVs, Cameras Used to connect security cameras to your power distribution system or power adapters.Features a male plug on one end and two bare wires on the other Red Black wire jackets indicate polarity.

User questions & answers

Question:	How Long are the leads
Answer:	Dear friend, Yes, this camera would work with the zosi 8 channel ahd-720p dvr. Support Email: [email protected] WhatsApp: 86-137-5005-6859 Best regards
Question:	What's the wire gage (awg
Answer:	Dear friend, If your bunker hill dvr could connect the cameras via bnc cable, than these cameras could work as the replacements. Thank you so much. Support Email: [email protected] Best regards

Product description

Night Owl’s SPF-CAMP-15A is a Camera Power Adapter with a 4-way power splitter, which will allow you to easily power up to 4 security cameras. Now you can guarantee your cameras will always be connected, escaping the chance of missing out on any suspicious activity!

• Power up to 4 Analog or AHD Cameras with one plug
• Do-It-Yourself (DIY)
• 1 x 12V 1.5AMP Power Adapter
• 1 x 4-Way Power Splitter

User questions & answers

Question:	does any one know if this replacment will work on mine the model on my power supply is KA3A
Answer:	I would not purchase. It only worked for 2 uses and the customer service was extremely unresponsive when we asked for a refund. However, if you do purchase, it is loud enough for home use.
Question:	Will this work on my Bunker Hill model 62463 system
Answer:	Remotes doesn't work, do it doesn't work
Question:	I only need to power one camera. Will this work
Answer:	Yes I can be wired to a mixer. Anything that has an input and output plug/ male & female can be connected.
Question:	Will this work with hda10 series
Answer:	So there’s nothing to tell

• 🔴Power Charging 12V DC power cable 5.5x2.1mm barrel connectors 10 * Male & 10 * Female connector DC plug cable
• 🔴Pre-tinned copper clad, Easy to weld and install, secure connection and rapid transmission
• 🔴Provides a simple and secure DIY solution for DC power connectivity, work with a power adapter or a power supply box
• 🔴Compatible with all CCTV security surveillance camera systems and other 2.1*5.5mm DC power devices like part lighting or led strips
• 🔴Please look for the seller CENTROPOWER to purchase, otherwise it will not be responsible for product quality problems.

User questions & answers

Question:	Is the center pin the black wire (negative)? I believe that's the usual arrangement for battery charging service
Answer:	The center pin is the red wire. If you're worried about the colors; https://www.amazon.com/gp/product/B075R64SCQ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Question:	Could i use this for a 9v battery
Answer:	Yes you can, but you will need a 9 V clip connector to use them. These cables can handle the voltage and current that a 9V battery used in a smoke detector, can provide
Question:	How long is the barrel
Answer:	14/32nds or 11mm
Question:	What is the wire length
Answer:	The wire length is 9.5in.

Product features

10 Pack F/M Connectors

• 10 x Female DC Power Pigtail Cable
• 10 x Male DC Power Pigtail Cable
• What is the wire length?
• Answer:The wire length is 9.5in.

PVC Flame Retardant Plastic

• Flexible & Durable
• With new flame retardant / anti riot sun / antioxidant / anti-aging PVC plastic which is flexible and durable.

Easy Installation

• Easy Installation
• Easy to weld and install, as the ends of the DC power pigtail cables are pre-tinned making them super easy to solder. Also features two wires on the other Red Black wire jackets indicate polarity.

Easy to Connect

• Easy DC Power solution, compatible with all CCTV systems and other 2.1*5.5mm DC power devices like part lighting or led strips. Very versatile.

Product description

The Splitter is for use with the V-mount battery and the CAMVATE Multi-purpose mounting plate (C1523/C1715) to supply the power for DSLR. 12V output is applied to the monitor screen; 7.2V output is applied to Canon 6D, 7D, 60D, 70D, 5D MarkII, 5D markII ,etc; 5V output is applied to the recorder , H4N microphone , frequency divider, etc.

Package Included:

1x V-mount Power Supply BP Battery Splitter

1 x LP-E6 Dummy Battery Pack Adapter

4 x DC Cable

• Safe & Efficient & Power Saving Adapter
• Material: ABS Flame-retardant plastic & Metal
• Power output interface: 12V; 7.2V; 5V; 14.8V D-Tap
• Battery Mount Plate for V-Lock,Battery Quick Release

User questions & answers

Question:	what is the individual max amperage of all the outputs
Answer:	Dear friend, The camera resolution is 800TVL. If your zmodo system resolution is bigger than that or the same as it, they would compatible with each other. Support Email: [email protected] Whatsapp： 86-137-5005-6859 Best regards
Question:	Have anyone having issues mounting this v mount to the cheese plate? Because none of the screws are lining up for me
Answer:	Greeting,The resolution of this cameras is 960H,if your DVR is compatible with this resolution,they can work on it.

Product description

Most cameras we carry only have a few feet of cable coming off the camera. This kit includes extensions for the power and the video signals. A coupler cable is included just in case the camera's output cable is the wrong gender! You will also need a Adapter to change the camera's video output connector from output. Now, it's easier than ever to mount your new camera just about anywhere you would like.

Product Name CCTV Power Video Audio Cable

Connectors BNC,RCA and Power, BNC Male on both ends,RCA Male on boths ends

Color Black

Length 5M/16ft

Package Contain 1 x 5 Meters BNC RCA CCTV Camera Cable



Package include:

1X 5M BNC RCA CCTV Camera Power Cable

• All-in-one video audio and power cable
• Each cable has pre-made BNC video connectors and 2.1mm center positive power plugs.
• RCA audio & BNC video & 2.1mm x 5.5mm power connectors
• Extend the cable on your new camera easily with this extension kit.
• Don't waste time soldering or crimping together your own cables or voiding the warranty by splicing in your own wires.

User questions & answers

Question:	Will this 16ft cable support HD analog 720p or 1080p video resolution
Answer:	I assume so, although I don't recall the resolution of the camera(s) that I've used it with.

• 【Premium Material & Durable Quality】ANNKE pre-made video & power combo cable is made of pure copper material, featuring lower resistivity and better electrical conductivity.
• 【ISET s.r.l Certified】The package comes with 5.5*2.1*10mm standard DC power connectors. And the standard video DC power supply meets the ISET s.r.l communication cable standard.
• 【Flexible & Weatherproof】The cable is plug-and-play and well adaptive to various application scenarios like the surface and inside of walls, floors, etc. Built with PVC-45P molding, it is flexible, resilient and weatherproof for indoor and outdoor use.
• 【Strong Compatibility】The cable is compatible with all brand surveillance DVR camera system, 960H/720P/960P/1080P/3MP/4MP/5MP, AHD/CVI/TVI. Note: For video cameras with 2.1mm DC power connectors only.
• 【Worry-Free Warranty】All ANNKE products are rigorously certified. We provide 1-year warranty and lifetime technical support. If you have any question. Contact us via email, phone call, WhatsApp, social media for instant replies.

User questions & answers

Question:	I have 12v 1amp Annke cameras with night vision. Will this cable power them
Answer:	yes you can change all the settings on manual exposure mode, low ligth is good aceptable quiality at 3200 iso the background blur is given by the lens, for a more pronounced blur you should consider buying the 50mm f1.8 lens
Question:	Could i power up my cameras with this cable
Answer:	It is micro HDMI .
Question:	Can I daisy chain all of these together for one long run
Answer:	You choose among jpeg, raw, or jpeg+raw.
Question:	What is the max amperage these will support
Answer:	There is a Canon adapter for using Canon EF or EF-S lenses.

Product features

Pre-Made 2-in-1 CCTV Cable

This CCTV cable simplifies the installation of surveillance system by using one cable to transmit HD video and provide safe power supply. It is pre-made so that you don’t have to worry about cutting, soldering and crimping the ends of your own cables before installing them. Now, it's easier than ever to mount your cameras just about anywhere you like.

Premium Pure Copper Wire Core

Compared with other metal material, the pure cooper wire core is characterized with better ductility, lower energy consumption, less voltage loss, better stability and excellent corrosion-resistance and oxidation-resistance properties.

Easy-to-Install & Weatherproof

This CCTV cable is plug-and-play and well adaptive to various application scenarios like the surface and inside of walls, floors, etc. Besides, it is weatherproof for indoor and outdoor use.

Work with All Brand DVR System

Due to its strong compatibility, this CCTV cable can work with all brand surveillance DVR camera system (960H/720P/960P/1080P/3MP/4MP/5MP, AHD/CVI/TVI). Now you can make full use of your present security system and get complete peace of mind.