13 best cb radio antennas

Product description

WORKMAN BRV1 DOUBLE GROOVE CB RADIO ANTENNA MIRROR MOUNT W SO239 STUD

• ALUMINUM DOUBLE GROOVE MIRROR MOUNT
• SO-239 STUD
• 3/8 x 24 THREAD

User questions & answers

Question:	Hi. I need 5 items. Do you ship with tracking number to Argentina
Answer:	Yes
Question:	will this mount to a yakima roundbar
Answer:	8 single chargers.
Question:	Does anyone know if this fits a 1997 Toyota 4Runner
Answer:	If you want to have them programmed to a private frequency, you will need to get an FCC license. No license required if you use the pre-programmed channels.
Question:	Does this come grounded or will you have to run your own ground wire
Answer:	Hello, this radio requires a Business license with the FCC who will designate a channel (or a few channels depending on your needs) that is private and specific to your company's use.

Product description

A sleek, slim easy-to-use solution for any CB application. Nine-foot coax cable offers plenty of length for most vehicles and strong magnetic base ensures your antenna stays put – no matter where the road takes you. Another great innovation from RoadPro, your trusted travel companion, bringing the comforts of home to on-the-go living.

• Center Loaded CB Antenna with 9’ Coax Cable
• Strong Magnetic Base
• Includes Magnet Mount, Coax Cable, and Antenna

User questions & answers

Question:	Will this work with a ge 3-5869a 40 channel cb
Answer:	Yes, wll work with low swr's on all 40 channels
Question:	So how can it help my hand held cb radio? Does it plug in somehow
Answer:	My handheld CB had a adapter on it to hook up to it. If yours did not come with one, check and see if one is available for yours. All I had to do is tune it to my radio.
Question:	Can the antenna be changed with another one
Answer:	Not sure
Question:	What type of Range does this antenna have
Answer:	normal range for mobile CB with 4 watt output power can get 1 - 5 mile range depending on terrain, base to mobile with 4 watt power output can be 5 - 10 miles depending on terrain and base station antenna.

Product features

RoadPro (RP-711) 24" Magnet Mount Stainless Steel CB Antenna Kit

With an aerodynamic design, this CB antenna kit has a 24 center loaded copper coil stainless steel CB antenna and a pre-wired magnetic mount base with 9' coax cable.

• 24 Center loaded copper coil stainless steel CB antenna
• Pre-wired magnetic mount base with 9' coax cable
• Aerodynamic design

Product description

Midland Micro 40CH Hand held CB

• Portable CB radio with 40 CB channels, 10 NOAA channels, and 4 Watts of output power
• Power with six AA batteries or included cigarette lighter adapter for mobile use
• Instant access to NOAA Radio, channels 9 and 19; Dual Watch monitors channel 9 and additional channel
• ANL (automatic noise limiter) and squelch control for improving reception and eliminating noise
• One-year manufacturer's warranty

User questions & answers

Question:	Can you use a fire stick antenna with this unit
Answer:	Jeff: Yes you can. You must use detach the flexible portable antenna, attach the provided vehicle 12 volt power source, and then attach the external antenna to the unit.
Question:	are there handle bar mounts for the radio for motorcycle
Answer:	The only one I've found was was from J@M model PACB-409-15. And they have a high opinion of it. I slightly modified an ARKON mount with the small pouch. I cut down the belt clip to fit in the bracket on dry days and use the pouch on wet days.
Question:	There are many magnetic car mount antennas offered....can you suggest the cheapest yet most effective antenna to go with this unit
Answer:	Remember your antenna is the most important part of your radio station.. Go with the Sirio Performer 5000, absolutely one of the best antennas you can get for the money.. You get what you pay for.. I've been a radio operator for over 50 years..
Question:	So with the adapter, you can plug the radio into something and it will use your car antenna or some other antenna and get further range? How far
Answer:	Your antenna is the most important aspect in getting good range on your CB. For the beginner, your best bet is to buy the Midland 18-2442, Center Load Mag Mount Mobile CB Radio Antenna, available on Amazon for $19.99. It works perfectly with the Midland 75-822 unit. The magnetic base is strong enough to stay put until you remove it. It should be centered on the roof of your car, or truck cab, to radiate the best signal.

Product description

Firestik FS-4BK 4' Firestik(R) II FS Series Tunable Tip CB Antenna - 900 Watts Black (1 Each)

• 5/8 Wave Length Design Rated @ 900 Watts
• Can be Used in Single or Dual Configurations
• Requires Fine Tuning (SWR)
• Easy-Tune Bare-Hands Tunable Tip
• Hi-Performance Loading Coil

User questions & answers

Question:	would this work with a Midland
Answer:	Shipping of all my items is done by Amazon (Fulfilled by Amazon), you will have to check with them.
Question:	Can this be used with a gmrs radio
Answer:	It will but you may need longer bolts depending on the tube diameter.
Question:	is this fs-4bk fire stick compatible with my 520xl uniden radio? and will it screw on to my magnetic mount
Answer:	only if the outside rear view mirror has a round mounting. It is designed to fit the outside rear view mirrors on an 18-wheeler
Question:	Can this be used with a dual band vhf/uhf radio? (136-174/400-480 mhz)(vhf 25 watt uhf 20 watt) i am looking for a cb style antenna for my truck
Answer:	It would depend on where you mount it. I mounted mine to an ungrounded surface, (plastics cab extenders), so I ran a ground wire. Hope this helps.

Product description

FireStik HEAVY DUTY SO-239 STUD MOUNT for CB RADIO ANTENNA (BULK) K-4A

• FOR ANY 1/2" HOLE
• FITS ALL FIRESTIK ANTENNAS AND MOUNTS
• BULK ITEM. NO RETAIL PACKAGE

User questions & answers

Question:	how many come in the package
Answer:	One and it sucks it fell apart using a 4 foot fire stick antenna
Question:	How would you mount these antennas behind the cab of a f 550 flat bed
Answer:	You would need the L-bracket to mount to the back of the cab. If you bed has the security frame at the cab you can mount to that with a bracket.
Question:	In assembling in the mounting bracket, you have 3 washers. 1 flat, 1 locking and 1 plastic isolator. as far as the isolator, top or bottom
Answer:	Plastic on the bottom next to the bracket, then the flat washer to protect the plastic from the locking washer and the lock washer on top next to the nut.
Question:	I am looking to remove my firestik and put a ham antenna there. looks like this is the adapter? 3/8-24 rf female to sma female adapter
Answer:	This is 3/8 x 24 to SO239.

Product description

Standard 3/8" x 24" Threads Fit for all standard Antennas Mounts and Accessories >br>. Every antenna should have a spring.Springs protect the antenna, mount and vehicle.

• Made from long lasting, top grade electro-polished stainless steel and Standard 3/8" x 24 threads
• Each spring is about 3.0"
• FOR ANTENNAS UP TO 60" TALL
• The antenna spring is heavy duty,but it can't guarantee that if it will be not flex when the speed is too fast , or if it will break down when the antenna being pushed or use it for some months ,importantly every person uses a different requirement,It may be springly、weak or stiff to you, but not the same to others.so please decide twice before you buy it.

User questions & answers

Question:	Is this spring compatible with the wilson 305-700 gum drop stud? Will the pot belly spring work too? Concerned about the threads matching. Thanx
Answer:	This awesome tunable tip 900W antenna will work with any device that utilized an antenna to receive a signal. Hook it up and let the radio waves fly.
Question:	Theard size? For both hole and stud
Answer:	This antenna will not work properly for GMRS. This is for CB frequencies, which are in the 27 MHz range. GMRS is around 462 MHz
Question:	Does it come with all the necessary mounting hardware
Answer:	It is definitely compatible with a uniden 520xl. Whether it will screw on to your magnetic mount is a different question, as there are different mounting base types. Without knowing what type of base you have, it is impossible to say whether this will fit. This antenna has a 3/8" male threaded base. Also note that this is a very heavy antenna, so the magnetic base should be substantial, preferably a triple mag mount
Question:	Will this fit larsen nmo
Answer:	I wouldn't. This antenna made for 11-meter CB Bands (26-27Mhz). Using it for UHF/VHF won't do anything to the antenna itself, but it could possibly hurt your radio because the SWR will be way off. Plus, your transmit power will be greatly diminished. For UHF/VHF, I use a Browning BR-180 on my truck and like it very much.

• Aircraft Quality Aluminum
• Stainless Steel Hardware
• ABS Material Stud
• Specifically Designed for Wilson and Heavy Shaft Oil Can Type Antennas

User questions & answers

Question:	I’ve got a 3/8 x 24 102” whip can I use it for the antenna just hook it up and go and is it tuneable
Answer:	Yes the threads are the universal type identical to the Wilson and should match up perfectly.
Question:	My chevy mirror arm is to wide for a standard antenna mount any suggestions as to what i should buy. goes on a 2013 chevy chassis rv
Answer:	Dont know off hand but there are standard for any mount ,wilson road pro ,stryker,firestick nrver had one not to fit on antenna I use a wilson gumdrop mount with a 102 inch steel whip.it want work on a magnet mount.
Question:	Can i combine this with the wilson
Answer:	No, it is only a spring, to put between the mount and antenna.
Question:	so i'm confused with the cables? what's the difference between pl259 and so
Answer:	I’m not sure.

Product features

Wilson 305-700 Aluminum CB Antenna Mount with Gum Drop Stud

The aluminum CB antenna mount with gum drop stud is specifically designed for Wilson and heavy shaft oil can type antennas. Made of aircraft quality aluminum with stainless steel hardware and an ABS material stud it also has a SO-239 connector for plug to plug hook-up.

Features:

• Aircraft quality aluminum
• Stainless steel hardware
• ABS material stud
• SO-239 connector for plug to plug hook-up

Product description

For over 50 years of excellence in the CB category, the 29 LTD Classic continues to be the radio standard of the current and future Professional Driver. The 29 LTD is continued to be manufactured based on the original design which has been known for performance and durability. Professional driver-requested improvements have been made thru-out the years to continue to enhance performance and durability continuing the un-matched Cobra tradition. The CB radio has been around since the 1930s. To see that the Citizens Band is still being produced and sold is testament to its reliability and usefulness. Cobra has brought back their version of the CB with this 29-LTD. They've made some nice improvements to the CB you might have used a decade or two ago. Key improvements to this radio include a front panel microphone connector which makes in-dash installation a cinch. Cobra has also provided a nine foot microphone cord so that you keep in touch from a good distance, whether you're located in a truck cab or dispatch office. The final noteworthy improvement are tactile controls for safer, and more accurate, functionality. Other features include: antenna warning indicator, SWR calibration, instant Channel 9, PA capability, dimmer control, switchable noise blanker and RF gain. In a time of seemingly un-ending technological advances, it's nice to see something we created back in the late 1930s is still alive and kicking. What's in the Box One 29-LTD CB radio, nine foot microphone cord, transceiver bracket, microphone bracket, DC power cord, a user's manual, and a two year limited warranty.

The CB radio has been around since the 1930s. To see that the Citizens Band is still being produced and sold is testament to its reliability and usefulness. Cobra has brought back their version of the CB with this 29-LTD. They've made some nice improvements to the CB you might have used a decade or two ago. Key improvements to this radio include a front panel microphone connector which makes in-dash installation a cinch. Cobra has also provided a nine foot microphone cord so that you keep in touch from a good distance, whether you're located in a truck cab or dispatch office. The final noteworthy improvement are tactile controls for safer, and more accurate, functionality. Other features include: antenna warning indicator, SWR calibration, instant Channel 9, PA capability, dimmer control, switchable noise blanker and RF gain. In a time of seemingly un-ending technological advances, it's nice to see something we created back in the late 1930s is still alive and kicking.

What's in the Box

One 29-LTD CB radio, nine foot microphone cord, transceiver bracket, microphone bracket, DC power cord, a user's manual, and a two year limited warranty.

• Emergency Radio - CB Radios provide reliable communication which is not dependent on satellites and cellular networks that can be the difference between getting experienced help in an emergency and being left on your own when you need assistance.
• Antenna Warning Indicator - Take the guess work out of checking your antenna, a light will automatically illuminate if your system needs to be checked.
• 4 Watt Output - Giving you the best range of communication with the maximum power allowed by law.
• Instant Channel 9 - Immediate access to Emergency channel 9 to ensure you're driving safely from the very beginning.
• 40 Channel Access - Scan the complete range of 40 channels for full coverage of CB stations.
• Gift of Connection - Life on the road can be lonely, but it doesn’t have to be. Stay connected and keep your trucker safe this holiday season with the gift of Cobra CB Radios.
• Display Type: Led
• Included Components: Unit: Instruction Guide

User questions & answers

Question:	Does this have a speaker plug input
Answer:	Hi Susan, yes this CB does have the typical jack for an external speaker. output only. that is, you can add an external speaker. I hope this answers your question.
Question:	are the dials and knobs visible at night? thanks
Answer:	Yes it does, in blue. Great unit, would recommend.
Question:	Can this CB be used in home with a power supply
Answer:	Most definitely can be used with a 12v DC supply. Just be certain the supply is capable of delivering adequate power for the radio. Reference the specifications on-line.
Question:	Does this radio have a cigarette plug, or does it need to be hardwired into the vehicle's electrical system
Answer:	It only come's with a power cord that connects to the radio. you can get a cigarette adapter at a radio shack store. they are easy to put on. remember to watch the polarity! Hope this helps.

Product features

40 CB Radio Channels

Scan the complete range of all 40 channels for full coverage of CB stations.

Heavy-Duty Dynamic Microphone

Includes a CB Mic that was designed to last as far and as long as your travels take you.

Adjustable Dynamike Boost

This feature increases the microphone's sensitivity for increased voice clarity.

Instant Channel 9

Immediate access to Emergency Channel 9 to ensure you're driving safely from the very beginning.

Switchable Noise Blanker

Reduce the amount of static or unwanted electrical interference caused by your vehicles engine with this Switchable Noise Blanker.

RF Gain

Adjust reception sensitivity range for clear communication.

Product description

K40 Model K-30 35" Magnet Mount Stainless Steel CB Antenna, 300 Watts

• 300 Watts AM Power Handling Capability (ICAS)
• 15' Pre-Wired RG-58AU 95% Shielded Coax Cable Stranded to Prevent Breakage
• 35", 17-7 Stainless Steel Whip Antenna
• Radius 180° Tip Eliminates Need for Ball
• Heavy-Duty 4" 10oz. Magnet

User questions & answers

Question:	Is this a 26-28mhz aerial
Answer:	Mine came with a long whip that was centered on the high end of 26 Mhz out of the box. You will need to trim the whip to get the desired frequency range. Out of the box, mine was not tuned to the CB band (26.9 - 27.4 Mhz). I had to trim about an inch or two off, roughly. To cover the 10m Amateur band (28-29 Mhz) you would have to trim a lot more off. But note that the bandwidth of this antenna will not cover the entire 10m band. I believe mine will tune from 26.9 to 27.5 Mhz while remaining below 2:1 swr.
Question:	Work with uniden bearcat cb radio with sideband 980ssb? thanks
Answer:	yes. i have it on mine
Question:	how far is the range
Answer:	I wouldn't give $5.00 for a truck load of K-30s. I bought one and cannot get the SWR low enough to use it. On channel 1 the SWR is 1.2 , on channel 20 its 2.5 and on channel 40 its 3.2. That will burn up a radio. I talked to three other people who got one and have the same problem. A radio tech told me a wilson 1000 is the best. I haven't yet got one and just stopped using my cb till I can afford another antenna.
Question:	Do you have to drill a hole in truck to connect the cable from the anntena to cb or can it be run through window
Answer:	No drilling necessary. The antenna has transmission line ("coax") already attached to it - I forget the exact length, it's about 15 feet...with a common CB antenna connector at the end. The connector is called a "PL-259", it's cylindrical and measures between 0.720" - 0.730" (a trifle under 3/4") at the widest point. You can easily pass this through a window, but you might want to consider feeding the coax transmission line in around a weatherseal on a tilting window or hatch. The coax is about 1/4" diameter and most hatch-style windows easily close and latch over it without damage. The base of the antenna is magnetic, and does a very good job of holding the antenna in place. I mention this because I read somewhere Ford is introducing aluminum body trucks, hopefully nowhere we need antennas. Magnetic mounts won't work on aluminum.

Product features

K40 Antenna, Base Load, 35 in.

This 35” stainless steel CB antenna with 300 Watt AM power handling capability (ICAS) and has a base loaded coil. 15' pre-wired RG-58AU 95% shielded coax cable includes a PL259 connector and 4” Heavy-duty 10 ounce magnet. The radius 180° tip eliminates need for a ball. Proudly made in the USA.

• 15' Pre-wired 95% shielded coax cable
• 17-7 stainless steel whip antenna
• Base loaded coil

• Made from long lasting, top grade electro-polished stainless steel.
• Excellent strength, fits like a glove to a Radio Shack "twin mirror" type, nice glossy finish.
• Protect the antenna, keep the stability of the antenna, 100% stainless steel plating material
• Works with antennas up to 60" long and Standard 3/8" x 24 threads
• EASY TO SET UP:Upper and lower inserts are made of chrome-plated machine brass

User questions & answers

Question:	I bought the springs for a 4 foot fire stick installed now springs will not stand straight Very flexible but now they’re in a leaning back position
Answer:	Sucks doesn’t it. I took my off and don’t use any more. You can too, fire stick bends pretty good if you need it to.
Question:	Does this work with Firestik 2 antenna
Answer:	Good for a 2-3 foot antenna. Standard threads that cb antennas use. Longer antennas would need the bigger spring. But yes it should work fine
Question:	The mounting stud at the bottom looks pretty short, can it be removed and replaced with something longer
Answer:	It's all-thread. It can be removed completely.
Question:	Is this spring black
Answer:	Yes, the spring is actually black.

Product features

Marketty Antenna Spring will accompany you on your journey!

• Travel is one of the great pleasures of life.It's a way of seeing the world and getting to know places you've never been before.Here are some ways to help you make the most of your travel experience.
• Wherever you are, and whoever you may be, there is one thing in which you and I are just alike at this monment, and in all the moments of our existence. We are not at rest, we are on a journey. Our life is a movement, a tendency, a steady, ceaseless progress towards an unseen goal.
• Marketty Antenna Spring is your most trustworthy partner!

Marketty SS3H Heavy Duty Stainless Steel Springs.

1. Detailed introduction:This spring keeps it steady with high winds but will easily bend to save you antenna when hitting branches. If you have a fiberglass antenna you need this.
2. This is pretty much needed if you’re going to have an antenna sticking above your roof line where trees,
3. If something hits the antenna and flings it back, it returns to its position very quickly without whipping around too much which protects your car from being hit.

MULTI-VEHICLE

Upper and Lower Inserts are Made of Chrome-Plated Machine Brass.

MULTI-VEHICLE

Springs are Made from Top Grade Electro-Polished Stainless Steel.

MULTI-VEHICLE

Standard 3/8 x 24 Threads Fit All Firestik Antennas Mounts and Accessories.

MULTI-VEHICLE

May be Used with Antennas Up to 5’.

Product description

Specifications:

Compatible with: CB Radio; Amateur Radio; Vehicle Mobile Radio; Handheld Ham Radio; Two Way Radio; Public Radio Scanner; Watt Power SWR Meter; Arrester; Antenna Analyzer;

Connector: UHF PL259 Male 50 Ohm Connector

Connector: UHF SO239 Female 50 Ohm Connector

Cable: RG58 50 Ohm Coaxial Cable

Length: 10 Feet / 3m

Impendence: 50 Ohm

Weight: 140g

Package List: 1 x Cable (As the Picture Shown)

• Compatible with: CB Radio; Marine Boat VHF Radio, Ham Radio, Two Way Radio, Amateur Radio, FRS GMRS MURS Radio, Walkie Talkies; Public Radio Scanner;
• Compatible with: Arrester,Antenna Switch,Surge Protector,Watt Power SWR Meter,Duplexer,Dummy Load,Patch Panel;
• Connector: UHF PL259 Male 50 Ohm Connector; Connector: UHF SO239 Female 50 Ohm Connector;
• Cable: RG58 50 Ohm Coaxial Cable; Length: 10 Feet / 3m
• Package List: 1 x Cable (As the Picture Shown)

User questions & answers

Question:	If i add this to my existing cable will i have to re-tune? Will i notice much of a quality difference
Answer:	pl259 is the male on the end of coax cable, so239 is the female connector on the antenna base

Product description

"From natural disasters and national emergencies to unprecedented times, Cobra is the most trusted brand in communication and power solutions. We believe reliability and quality aren’t optional. It’s our standard. Citizens Band Radio (also known as CB radio) is, in many countries, a system of short-distance radio communications allowing people to speak over long distances. Keep in touch and stay alert on the road withThis Cobra CB radio. The 29 LX features a modern aesthetic design with a selectable LCD dot matrix display to compliment the interior of any cab. The display also has customizable night and day settings to enhance readability in both very bright and dark conditions. Based on the 29 LTD classic platform with added features (NOAA weather reception, 4-color display, and monitor the vehicles antenna system, voltage system, and the radio's RF output power). The 29 LX features a modern aesthetic design with a selectable LCD color display in red, green, blue, or amber to complement the interior of any cab. The display also has customizable night and day settings to enhance readability in both very bright and very dark conditions. In addition, Cobras latest CB Radio features a new clock/timer that enables drivers to track their on-time driving hours. The driver clock/timer also functions as an alarm clock. A classic, full-featured CB radio with a modern design. Click here for a larger imageThis model is based on the 29 LTD Classic platform, with added features: The new weather receiver with scan automatically advances to the next clear channel when driving cross-country ensuring the driver is always getting the latest weather alerts and warnings. Also new is the industrys first and only Radio Check Diagnostic. Now users can monitor the radios RF output, SWR setting, and vehicle battery voltage. The 29 LX also includes all 40 channel scan and memory channel programming, Instant channel 9 and 19, audible key tones, channel frequency readout for CB and weather channels, 4 watts AM RF power output, the maximum amount of power allowed by law; Talk Back controls allowing drivers to adjust the desired amount of modulation talk-back. 29 LX Features Selectable 4-Color LCD Display With Dimmer Choose from four easy-to-read display colors for viewing operating channel frequency and other data: red, blue, green and amber. Match your cab or just your preference with ease. You can also adjust the brightness of the front panel for day and night driving. 10 NOAA Weather Channels With Emergency Alert The 29 LX provides instant access to 10 National Weather Channels, 24 hours a day, in all 50 states. The Emergency Weather Alert feature lets you know you if threatening weather is nearby with an alert tone even if CB is turned off. The unit can also automatically scan for the nearest/strongest weather alert signal. Talk BackThis control is used to adjust the desired amount of modulation talk back that is present at the speaker during transmit. Choose from four easy-to-read display colors: red, blue, green and amber. Radio Check Diagnostic / Antenna Calibration Allows testing of important radio functions such as RF power, antenna condition and battery voltageget your house in order before heading out. SWR Calibration allows calibration of antenna system for maximum performance. Antenna should be bought separately. Memory Channel With Scan Feature Store up to 10 of your most frequently used channels for quick access, and scan through all of them as needed. A standard channel scan is also provided for scanning all 40 channels Clock/Timer/Alarm Also included is a a clock/alarm and on-duty timer, handy for professional drivers. Nine-Foot Microphone Cord A generous nine-foot cord provides easy reach within any area of the vehicle. A 4-pin front microphone connector allows convenient installation to be in dash or under dash. 10 NOAA Weather channels with emergency alert and auto-scanning. Speak Clearly The adjustable Dynamike feature boosts your microphone for increased voice clarity, and Delta Tune clarifies incoming signals. You can also adjust RF gain in weak or strong signal areas to optimize. PA Capability You can useThisThis CB radio as a Public Address System with PA speaker. Receive signals can also be monitored through PA. 4 Watts AM RF Power Output Transmit with the maximum amount of power allowed by law. Instant Channel 9 and 19 Instant access to emergency channel 9 and information channel 19. What's in the Box 29 LX LCD CB Radio, Microphone With Nine-Foot Cable, Mounting Hardware, Power Cabling "

• Emergency Radio - CB Radios provide reliable communication which is not dependent on satellites and cellular networks that can be the difference between getting experienced help in an emergency and being left on your own when you need assistance.
• NOAA Weather Channels - Be the first to know of incoming hazards or changing weather with instant access to NOAA weather channels 24 hours a day.
• Weather & Alert Scan - Automatically tune into the strongest weather channel and alert tone available to catch every important weather notice. With the 29LX you won't miss important information while scanning through channels.
• Clock & Alarm – Display the current time on screen and keep yourself alert by setting an alarm for anytime during the day to make sure you're always on time.
• Radio Check & Frequency Display - Automatically run diagnostics for voltage and RF output, with antenna matching to ensure that the signal is as strong as possible and working properly. Operating CB and weather frequencies also displayed on screen.

Product features

40 CB Radio Channels

Scan the complete range of all 40 channels for full coverage of CB stations.

Heavy-Duty Dynamic Microphone

Includes a CB Mic that was designed to last as far and as long as your travels take you.

Adjustable Dynamike Boost

This feature increases the microphone's sensitivity for increased voice clarity.

Instant Channel 9

Immediate access to Emergency Channel 9 to ensure you're driving safely from the very beginning.

Switchable Noise Blanker

Reduce the amount of static or unwanted electrical interference caused by your vehicles engine with this Switchable Noise Blanker.

RF Gain

Adjust reception sensitivity range for clear communication.

• This Jumpler cable is used for CB Ham Radio Antenna Analyzer , Tuner, Switch, Monitor, Dummy Load and SWR Meter, it is also great for Jeep Wrangler CB installation
• WELL BUILD and 50 Ohm¸ LOW LOSS, this coax uhf male pl-259 antenna cable is made of tinned copper inner conductor with brass connector, which can resist oxidation and corrosion better
• OVER 95% COVERAGE: The braid shield is made of 96x0.12x0.14mm Aluminum wire which made this jumper cable is really low low and maximum protect the signal during the transmission
• NO OBVISE SWR RISING, after testing, this RG58 Coax cable does not introduce static nor interference when bridge the CB to SWR meter
• 100% GUARANTEE, all Ancable products come with 12 months warranty, you are protected with our 100% No Questions Asked Guarantee for either a replacement or refund.We care about only putting out high quality products that satisfy your needs.

User questions & answers

Question:	is this considered a/u
Answer:	I would go with a willson mag mount antenna that is what I use on my president radio on a 2001 f350 a willson 2000
Question:	Can i use this for my tv
Answer:	Yes, but only the "trucker style 5000" , with the 3/8-24 bolt in bottom shaft. It will not fit the "car" 5000 ( which fits on the Wilson magnetic and trunk mounts)