9 best radio microphones

• Attack control, two sub-octaves, 2-pole resonant low-pass filter
• Enhanced detune, enhanced algorithm
• Saves your favorite settings with a click
• Rugged, pedal-board-friendly die-cast chassis

Product description

A faithful reissue of the cult-classic released in 1979, the SSD uses analog synthesis techniques to create mind-blowing sounds ranging from deep kicks to high toms to sci-fi drums. Trigger it from the built-in push button or an external (non-MIDI) electronic drum pad. Pass external sounds through the gated amplifier via the aux input. The Super Space Drum lets you create, control and manipulate a stunning array of synthesized sounds.

• Analog drum synthesizer dripping with vintage sound and vibe, creating an awesome array of percussive tones.
• Triggers via the on-board pushbutton, an external (non-MIDI) drum pad and most clock generators
• Processes external sounds thru its Aux In
• Works great with the EHX Clockworks Rhythm Generator/Synthesizer, 8 Step Program Analog Expression/CV Sequencer and other similar devices
• Includes EHX9. 6DC-200 power supply, also accepts a 9V battery

User questions & answers

Question:	Is the provided power supply 110-240v compatible
Answer:	Hello. We don't recommend using it to connect speakers directly. The cable can only handle around 50W power. It may not be enough.
Question:	What is the dry output for
Answer:	The Effects Loop is running with this within the loop. The signal is passed and modified by this box and then continues on in the loop. It behaves as a manual adjust 'wire'.
Question:	Could you run the Wet and Dry output signals at the same time to an amp that has only one input
Answer:	Uses no power and can handle any amp with an effects loop of whatever power.
Question:	On true bypass, does the signal output to both the dry and effect outputs? So, if running to 2 amps, it would act as a splitter
Answer:	This device is a line level volume control. It's likely no use to you if the amp doesn't have an fx send and return.
Question:	Will the nano pog operate normal on a 9volt port off a pedal board brick? references are for a 9.6v power supply but the port on the nano states 9volt
Answer:	It’s a loop attenuator. Amp got a loop?
Question:	standard 9V adapter work
Answer:	I had it hooked up to a subwoofer and there was no audible noise when switching inputs.
Question:	Should i buy this or the regular pog
Answer:	I think it should. I use the Mini Route 3 to switch one phono preamp to three integrated amplifiers and it works perfectly.
Question:	Does this pedal have both a dry and wet output or is it just a single output? I noticed the micro POG does but cannot see one in the pictures here
Answer:	It is a passive switch for low level signals. A common input to three different outputs one-on-one. Or three different inputs to a common out, i.e. common to A, or common to B, or common to C. I use it to run my line level to different amps so I can switch between an analog transistor amp or a tube amp.
Question:	Bass guitars can blow guitar-amp speakers... Any danger of speaker damage with a heavy octave down signal? If not, why not
Answer:	Yes, it is a 3-way stereo switch made in the USA. I’ve been very happy with mine; been using it for about 8 months now.
Question:	Can this be used like the pitchfork, to transpose songs to 1/2, 1, etc steps down
Answer:	There have preinstall youtube and netflix,more apps you can download by yourself
Question:	Can this be powered by an mxr iso brick? the owner manual has a warning not to power with anything but the supplied ac adapter. anyone know why? th
Answer:	There have preinstall such as netflix and youtube in hd
Question:	How well does this work with a Bass guitar
Answer:	Nope. I hooked it in my chain on my internal 1Spot. Doesn't take a lot of power. Works great on splitting your signal chain.

Product features

Micro POG Polyphonic Octave Generator

The Legenday and classic original POG won top awards from every major magazine on every continent for its flawless polyphonic tracking and musical flexibility. The Micro POG delivers the same perfect tracking and smooth polyphony in a simplified design. Now in a small pedalboard-friendly diecast chassis, the Micro POG delivers and will blow you away the first time you use it.

DRY Knob

Controls the output volume of the DRY signal. The DRY signal is the signal present at the INPUT jack. As this knob is turned clockwise, the volume of the DRY signal will increase.

SUB OCTAVE Knob

Controls the output volume of the SUB OCTAVE signal. The SUB OCTAVE signal is one octave below the original input signal, half the frequency of the input signal. As this knob is rotated clockwise, the volume of the SUB OCTAVE signal will increase.

OCTAVE UP Knob

Controls the output volume of the OCTAVE UP signal. The UP OCTAVE signal is one octave above the original input signal or twice the frequency of the original input signal. The volume of the UP OCTAVE signal will increase as this knob is rotated clockwise.

Nano POG Polyphonic Octave Generator

The smallest member of the polyphonic POG clan provides impeccable tracking and sound. Separate level controls for dry, sub octave and octave up plus an extra Dry out and silent footswitching provide the perfect formula for this compact jewel.

SUB OCTAVE Knob

Controls the output volume of the SUB OCTAVE signal. The SUB OCTAVE signal is one octave below the original input signal, or half the frequency. As this knob is rotated clockwise, the volume of the SUB OCTAVE signal increases.

OCTAVE UP Knob

Controls the output volume of the OCTAVE UP signal. The OCTAVE UP signal is one octave above the original input signal, or twice the frequency. The volume of the OCTAVE UP signal increases as this knob is rotated clockwise.

DRY Knob

Controls the output volume of the DRY signal at the EFFECT OUT jack. The DRY signal is the signal present at the INPUT jack. As this knob is turned clockwise, the volume of the DRY signal at the EFFECT OUT Jack increases.

Product description

Commountain Heavy Duty Speaker mic/Microphone with Reinforced Cable, Noise Reduction Mic, 3.5mm Audio Jack and Detachable Swivel Clip



Features:

-Heavy Duty Construction, Housing Made of High Impact Engineering Plastic

-Omni-Directional Condenser Microphone & Electret Speaker Transmit High Quality Sound Even in Loud Environments

-PU Cable Reinforced by Kevlar Fiber & High Tensile Strength Coil Cord, Long-Life Design

-Rugged Detachable (Replaceable) Swivel Clip

-3.5mm Audio Jack Available for Listen Only Earpiece/Headset



Compatible with Kenwood Radios As Follow:

NX-220 NX-320 NX-240 NX-340 NX-420

TK-208/2100/2102/2130/2160/2170/220/2212/2300/2312/2360/240/240D/2400/248/250/TK-255/260/260G/270/270G/272G/278/278G

TK-308/3100/3101/3102/3107/3118/3130/3131/3160/3170/3173/320/3200/3201/3202/3233207/3230/3312/3360/340/340D/3400P/348/349/350/353/360G/370/370G/372G/373G/378/378G

TK-430/431

TH-F6/F6A/D7/D7A/D7AG/D7E/F7/F7E/G71/G71A

TH-G71E/K2/K2A/K2E/K2ET/21/21AT/21BT/22

TH-22A/22AT/22E/25/26/27/28/31AT/31BT/41AT/41BT

TH-42/42A/42AT/2E/45/46/47/48/55/75/77/G71

TH-205/215/225/235/235A/235E/315/41



Compatible with HYT/Hytera Radio As Follow:

TC-2088/2100/286/2685/278/386/378//3865/388/6685



Compatible with BaoFeng Radio As Follow:

UV-5R/5RA/5RA+/5RB/5RC/5RD/5RE/5RE Plus/UV-82/BF-480/490/530/999/888/777/666S/777S/888S



Compatible with PuXing Radio As Follow:

PX333/888/888K/328/358/999/666/777/777PLUS



Compatible with WouXun Radio As Follow:

KG-UV1D/KG-UV2D/UVDIP/KG-669/659/679/689/639/699/801



Compatible with QuanSheng Radio As Follow:

TG-K4AT/2AT/22AT/45AT/42AT/25AT/UV



Compatible with Arcshell Radio As Follow:

Arcshell AR-5,Arcshell AR-6

• Heavy Duty Construction, Housing Made of High Impact Engineering Plastic
• High Quality Omni-Directional Microphone & Electret Speaker Enable Voice to Be Transmitted Clearly Even in Loud Environments
• PU Cable Reinforced by Kevlar Fiber, High Tensile Strength Coil Cord, Long-Life Design
• Rugged Detachable (Replaceable) Swivel Clip & 3.5mm Audio Jack
• What You Get: Speaker Mic, Our Friendly Customer Service

User questions & answers

Question:	Will this microphone work with the wouxon kg-uv9d
Answer:	It works like any Bluetooth connection. You dial the number from your phone. I bought an external speaker for better sound and the unit comes with a microphone that you place somewhere in the vehicle. I rarely use the phone through it because my exhaust tone interferes with the call through the mic. Being that your phone connects, you can play pandora, iheart radio, or whatever music is stored on your phone. This means you can connect an amp and feed sound to your vehicle speakers.
Question:	Will these work with a Seodon Walkie
Answer:	That means something is WRONG big time!!! Turn it off and have it checked out by a pro. Something is burning and u don't want a fire in ur truck or car.
Question:	Will this work with the baofeng gt-3tp
Answer:	Off the shelf it puts out about 2-4 watts. If peaked and tuned it put out around 11-13.
Question:	Will this mic work with a anytone d868uv
Answer:	Listen. Tweaked! Peaked and tuned idk? You can have any radio tweaked, take your cb to a guy/cb shop(the guy making announcments over the radio...) He will snip out the thing that only allows it to do only 4 watts and add a thingymajob to bump it up to 20, 30, 40 watts. Or...hook up a linear. Or...do both. FYI- Half of your radio is your antenna, put the ugly sticks under your bunk and get a pair of wilsons or k-40s or anything else...

Product description

Commountain Heavy Duty Remote Speaker mic/Microphone:



Features:

-Compatible with Motorola 2 Pin Speaker Mics -Heavy Duty Construction, Housing Made of High Impact Engineering Plastic

-Omni-Directional Condenser Microphone & Electret Speaker Transmit High Quality Sound Even in Loud Environments

-PU Cable Reinforced by Kevlar Fiber & High Tensile Strength Coil Cord, Long-Life Design

-Rugged Detachable (Replaceable) Swivel Clip

-3.5mm Audio Jack Available for Listen Only Earpiece/Headset



Dimension Specification:

-Dimension of Microphone Housing: H 3.05xW 2.35 inch

-Cable Length without Stretching: approx 17 inch

-Cable Length with Full Stretching: at least 40 inch

-Coil Cord Length: 9.05 inch

-Cable Diameter: 1.9 inch



Speaker Electric Specification:

-Impedance: 8Ω±15% at 1.2KHz 1.0V

-Rated Input Power: 2.0W

-Max Input Power: 3.0W

-Output S.P.L.: 85dB±5dB



Microphone Electric Specification:

-Type: Omni-Directional

-Output Impedance: 2.2KΩ±10%

-Sensitivity: -43dB±2dB (1V/Pa)

-Frequency Range: 50Hz-20KHz



Compatible for Motorola Radios As Follow:

BC10 BC120 BC130 Mag one BRP40 BC90

CP100 CP110 CP125 CP150 CP185 CP200 CP200D CP200XLS CP450 CT150 CT250 CT450 CT450LS CLS1110 CLS1410

DTR410 DTR550 DTR650 DLR1020 DLR1060

GP280 GP68 GP88 GP300 GP308 GP2000 GTI GTX

LTS2000

MAG ONE

P040 P080 P110 P1225 P1225LS PR400 PRO3150

RDU2020 RDU2080D RDV2020 RDV2080D RDU4100 RDU4103 RDU4160D RDU4163D RDV5100 RMU2040 RMU2043 RMM2050 RMU2080 RMU2080D RMV2080

SP10 SP21 SP50

XTN446 XTN500 XTN600 XV1100 XV2100 XU1100 XU2100 XU2600

VL130 VL50



Compatible for HYT Radio As Follow:

TC446S TC500 TC600 TC610 TC620 TC700 TC700EX



Compatible for TEKK Radio As Follow:

XU100 XV100 XU1000 XV1000

• Heavy Duty Construction, Housing Made of High Impact Engineering Plastic
• High Quality Omni-Directional Microphone & Electret Speaker Enable Voice to Be Transmitted Clearly Even in Loud Environments
• PU Cable Reinforced by Kevlar Fiber, High Tensile Strength Coil Cord, Long-Life Design
• Rugged Detachable (Replaceable) Swivel Clip & 3.5mm Audio Jack
• What You Get: Speaker Mic, Our Friendly Customer Service

User questions & answers

Question:	Can we oder just the swivel Clips
Answer:	Dear CJ,Thanks for your inquiry.Yes, it's okay.Thanks for your all support to us, Any further needs or questions, pls contact [email protected] freely~
Question:	Work with midland gxt
Answer:	I don’t think so. This cable would be used to connect things like a iPad, iPod or phone to a receiver as it has 3 ends 2 for receiver and one for say the iPod. I think you would need a 4 connector RCA cable for a turntable. Hope to His helps.
Question:	Will this work with the motorola dtr700 radio
Answer:	Dear mR2,I looked up your speaker system and it does have the correct type of input, i.e. stereo. This cable should work just fine. It is a nicer cable and seems to connect very well and secured to each connection type. So use the R/L output of the TV with the Red/White ends and then connect the 3.5mm to the Aux in on your Omni 20 Speaker. If you do not hear any sound, you may need to go into your audio settings on your TV and pick to send it out through the R/L channels. Some TV's let you pick this option and some will automatically do it for you. You could also just get a 3.5mm to a 3.5mm cable as well and connect it that way. Best of luck and if you have any questions when you get the cable, please let me know if I can help answer any questions at that point.
Question:	Will this work for a icom ic-v
Answer:	Yes you can

Product description

Motorola OEM PMMN4027, PMMN4027A IP57 Submersible Remote Speaker Microphone with Windporting Technology PTT Mic Compatible with Motorola radio models: GP140, GP240, GP280, GP328, GP330, GP340, GP360, GP380, GP540, GP580, GP640, GP680, GP1280, HT750, HT1250, HT1250LS, HT1550, HT1550XLS, MT Series: MT850, MT850LS, MT950, MT8250, MT8250LS, MT9250, PRO860, PRO5350, PRO5450, PRO5460, PRO5550, PRO5750, PRO7150, PRO7350, PRO7450, PRO7550, PRO7750, PRO9150, PTX700, PTX760, PTX780, MTX950 MTX 950, MTX960 MTX 960, MTX8250 MTX 8250 MTX8250LS MTX 8250LS, MTX9250 MTX9250

• IP57 Submersible Remote Speaker Microphone
• Windporting Technology PTT
• Portable Radio Microphone

User questions & answers

Question:	Has anyone tried this on a baofeng gt-3wp
Answer:	There is no pop in the audio. The actual foot switch does make a clicking sound when stepping on it similar to other effects pedals.
Question:	I have a XPR 7580 will this be compartible
Answer:	It would work fine. It's either push-to-talk or push-to-silence, so you've got your cough button.
Question:	Can you use this with an Ailunce HD
Answer:	There is no click with a dynamic mic. However if you push it while talking you may hear something like a scratchiness just like you would if you were running a fader while talking.
Question:	Will this work for an xts
Answer:	Unknown. I have been using an Shure headset microphone going into a preamp with phantom power. I have not had any popping with that setup.
Question:	Is this compatible with the smart audio feature on the xpr 7580? factory mic has 12 pins, and i only see 7 on this one
Answer:	The switch is non-latching. It is either momentary mute OR momentary talk.
Question:	Will this microphone fit a Motorola apx
Answer:	If my experience is anything to go by, you'll get 50-75 hours of continuous use... At your usage of 2 hours twice a week i.e. 4 hours you'll get 12-18 weeks of use out of one battery.
Question:	I have Motorola radio model xpr7350e, would this mic work
Answer:	Yes. With very little difficulty.
Question:	Where is the product manufactured? Thanks
Answer:	I'm pretty sure it's "either only" but to be honest I never explored the possibility of having both live. I use it to switch between two guitars onstage so having both live was not something I ever needed.
Question:	Tried this pedal for the first time saturday. When I turned it on, using 9v power supply, my volume was cut in half. Faulty pedal
Answer:	It comes with the basics. You can always go to the Boss site and download the manual. It's operation pretty straight forward.
Question:	will the bass sounds of this act like an actual bass, as in can I play it through my guitar amp at full volumes
Answer:	Hello. Do you mean the the difference between MC103 ($5 cheaper) and the MC103 Pro? Well., we made the MC103 Pro since some customers think it is not beautiful with all the cables on the front panel. So its main upgrade is on the appearance. But the MC103 can do 1-in-3-out and 3-in-1-out, while MC103 Pro can only choose one mode. So you need to know your requrement clearly.
Question:	Other pedals provide a cleaner output on battery power only... neg comments suggest lower outputs and induced noise.. that caused from pwr adapters
Answer:	Yes. I connect a single XLR output from an audio preamplifier to this switch box's input then connect the box's outputs to the XLR inputs of audio amplifiers. Then I just turn on the preamp and amp I want to use and select the amp on the box's switch ("X," "Y," or "Z") and I'm ready to rock. You could select from three different mics that run from one input source. This is a great product.
Question:	I am using the looper. It would be nice to add bass line without switching from the guitar to the bass guitar. Does this produce do the job
Answer:	Yes. I’m running Uaudio x8p analogue out to Nobsound 1 in 3 out to power 2 pairs Genelec active monitors. Works well so far.

Product features

Octave Multiplexer Analog Sub-Octave Generator

Get down! Generates deep, phat bass tones one octave below the notes you play. Two separate smoothing filters enable you to tailor your sub-octave signal to the exact bass sound you desire, separating the Octave Multiplexer from other octave devices. Run your vocals through it and sound just like Ike Turner. This is a monophonic device and works only on single notes.

HIGH FILTER Knob

Adjusts a filter that will shape the tone of the sub-octave’s higher order harmonics. Turning the HIGH FILTER knob clockwise will make the sub-octave sound more gnarly and fuzzy.

BLEND Knob

This is a wet/dry knob. Counter-clockwise is 100% dry. Clockwise is 100% wet.

BASS FILTER Knob

Adjusts a filter that will shape the tone of the sub-octave’s fundamental and lower order harmonics. Turning the BASS FILTER knob counter-clockwise will make the sub-octave sound deeper and bassier. Please Note: the BASS FILTER knob is only active when the SUB switch is set to ON.

SUB Switch

Switches the Bass Filter in and out. When SUB is set to ON the Bass Filter and its corresponding knob are activated. When the SUB switch is set to OFF, only the High Filter is active. Turning the SUB switch on gives the sub-octave a deeper, bassier sound.

Product description

Motorola PMMN4025A is a Motorola Original microphone boasting a revolutionary windporting feature that helps lessen background noise from high winds and other severe weather conditions. It also utilizes the IMPRES Smart Audio System which provides optimal audio performance and enhanced audio gain capability. The audio jack allows users to attach an earpiece to receive audio clearly and discreetly. Compatible with MOTOTRBO XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580

• 3.5mm jack for receive-only audio accessories and discreet communications
• 1 Year Manufacturer Warranty
• Compatible with MOTOTRBO XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580

User questions & answers

Question:	Does this have the emergency button on top
Answer:	I'm not sure what the emergency button is. Yes there is a orange little button on top. Hope this help.
Question:	I just received mine but it does not work with the XPR
Answer:	This is not compatible with the XPR7550, only the XPR6550 series.
Question:	Will this mic fit a apx6000li
Answer:	I Googled the radio you listed - according to the sales items listed - this speaker mic will fit. Very easy to look up the information.
Question:	will it also work with the XPR 7350e
Answer:	Yes

Product description

External Microphone Assembly For Car Radio Head Units With 3.5mm Input. Includes Microphone With 3M Cord, Visor Clip, Dash Mount & Foam Filter. Technical Details: Polar pattern: Omni directional 3.5mm connector Sensitivity:-30dB+/-2dB Frequency Range: 50Hz-20KHz Output Impedance: ≤2.2 kΩ SNR: >58dB Standard Operation Voltage: 4.5V Operation Voltage: 1.0V-10V.DC Wire Length: 3 m (9.84ft) For: Kenwood - KMR-M308BT, KMR-D562BT, KMR-D558BT, KMR-D362BT, KMM-BT312U, KMM-BT308U, KIV-BT901, KIV-BT900, KDC-X998, KDC-X997, KDC-X996, KDC-X995, KDC-X994, KDC-X898, KDC-X897, KDC-X896, KDC-X895, KDC-X798, KDC-X797, KDC-X796, KDC-X697, KDC-X696, KDC-X695, KDC-X599, KDC-X598, KDC-X597, KDC-MP362BT, KDC-BT958HD, KDC-BT955HD, KDC-BT952HD, KDC-BT948HD, KDC-BT855U, KDC-BT852HD, KDC-BT848U, KDC-BT762HD, KDC-BT758HD, KDC-BT752HD, KDC-BT742U, KDC-BT652U, KDC-BT648U, KDC-BT645U, KDC-BT562U, KDC-BT558U, KDC-BT555U, KDC-BT362U, KDC-BT358U, KDC-BT318U, KDC-BT310U, DNX9990HD, DNX9980HD, DNX9960, DNX9140, DNX8120, DNX771HD, DNX719VHD, DNX7190HD, DNX7180, DNX7160, DNX7140, DNX7020EX, DNX7000EX, DNX6990HD, DNX6980, DNX6960, DNX6190HD, DNX6180, DNX6160, DNX6140, DNX6040EX, DNX6020EX, DNX6000EX, DNX571EX, DNX570TR, DNX5180, DNX5060EX, DDX896, DDX8901HD, DDX814, DDX812, DDX790, DDX771, DDX7701HD, DDX770, DDX719, DDX714, DDX712, DDX616, DDX5901HD, DDX491HD, DDX471HD, DDX470, DDX419, DDX418, DDX372BT, DDX371, DDX370 Sony: MEX- GS610BT, MEX-N5100BT, MEX-GS8100BH, MEX-N6000BT, MEX-M70BT, MEX-M50BT, XNV-660BT, XNV-770BT, XAV-72BT, XAV-712HD, XAV-70BT, XAV-701HD, XAV-68BT, XAV-62BT, XAV-622, XAV-602BT, XAV-64BT, XAV-601BT, WX-GT90BT, MEX-N5000BT, MEX-GS600BT, MEX-BT5000, MEX-BT5700U, MEX-BT4700U, MEX-BT4000P, MEX-BT4100P, MEX-BT39UW, MEX-BT3900U, MEX-BT3800U, MEX-BT38UW, MEX-BT3700U, MEX-BT3100P, MEX-BT31, MEX-BT3000P, MEX-BT2900 Alpine: INA-W910, INE-NAV40, INE-S920HD, INE-W927HD, INE-W940, INE-W957HD, INE-Z928HD, IVE-W535HD, IVE-W555BT, UTE-42BT, UTE-52BT, CDE-W265BT,

• Adopting electret condenser cartridge with high sensitivity , low impedance , anti noise and ant jamming capability ,
• Aftermarket microphone works with most car radios with 3.5mm Mic input.
• With fast and accurate data transmission, which could guarantee the voice clearly and stably under kinds driving occasions,
• Includes Dash Mount & Visor Clip.
• Wire Length 3 M (9 Feet)

User questions & answers

Question:	What’s the maximum distance recommended to get clear voice capture
Answer:	Mine is opprox 400mm and work perfect.
Question:	Will this work on a gopor hero4. I have and adapter for the gopro to connect to a 3.5mm jack
Answer:	I have a Hero5 and it DOES work, using the GoPro USB>3.5mm adapter.
Question:	will this work with alpine ilx
Answer:	If it has a standard mono 3.5mm mic input, I am sure it will work.
Question:	Can i sing to music with this mic
Answer:	yes thank you

• --PROFESSIONAL SOUND CHIPSET 192kHz/24bit: This Condenser Microphone has been designed with professional sound chipset, which let the USB microphone hold high resolution sampling rate. SAMPLING RATE: 192kHz/24bit!!! The smooth, flat frequency response of 30Hz-16kHz--Extended frequency response is excellent for singing, speech and Voice over, Performed perfectly in reproduces sound, high-quality mic ensure your exquisite sound reproduces on the internet
• --PLUG and PLAY: The microphone has USB 2.0 data port which is easy to connect with your computer and Linux operation system, and no need extra driver software, and no need for an external sound card. Double shielding USB cable reduces interference. That makes it easy to sound good on a podcast, livestream, video call, or most any other kind of recording
• --16mm ELECTRET CONDENSER TRANSDUCER & MAGNET RING: With the 16mm electret condenser transducer, the USB microphone can give you a strong bass response. This professional condenser microphone picks up crystal clear audio. The magnet ring, on the USB microphone cable, has a strong anti-interference function, which makes you have a better feel
• --STABLE & PORTABLE DESIGN: This USB microphone kit includes a lockable aluminum organizer storage box, which is a safe and portable design. The design allows your products to be protected from long-distance transport and also makes it easier to travel with a microphone. Solidly built and stable on mics stand, which is metal housing all over, very solid. The newly designed stand let the microphone more stable and easy to adjust, which will give you a better experience
• --COMPATIBLE WITH ALL OS: For all Laptops, PC and Mobile phones. But if you want to connect with phone, you need an OTG adapter (not included). Strong output, no distortion, low power consumption. PACKING LIST: Maono USB mic + Shock Mount + Table stand+Pop filter+ Wind foam+USB-B to USB-A Cable+ Aluminum Box

Product features

MAONO -- USB Microphone Kit 192KHZ/24BIT Plug & Play with Aluminum Organizer Storage Case

USB Microphone Kit Plug & Play -with professional sound chipset, which let the USB microphone hold high resolution sampling rate. Sampling Rate: 192kHz/24bit. With a good cardioid polar pickup pattern, high output and low self-noise function, the microphone can accurately reproduce even the most subtle sound. It is suitable especially for studios, recording, broadcasting, meeting and gaming etc. This USB microphone kit includes an aluminum organizer storage box, Which is a safe and portable design.

Whether you need a mic to voice call from home or you need to record outdoors on your phone or computer.

The seller Nature Shopping has built our microphones to perform in any situation!

Specification:

Microphone-core: Dia.16mm Condenser

USB Cable: USB-A to USB-B

USB Cable length: 98 in

Polar Pattern: Cardioid

Frequency Response: 30Hz-16kHz

Sampling Rate: 192kHz/24bit

Sensitivity: -38dB+/-3dB (0dB=1V/Pa at 1kHz)

Product description

The top-quality Remtise Shoulder Speaker Microphone is universal & effective device for everyday team work, such as security guard, police, military, staff of shopping mall, restaurant, hotel, warehouse, construction area, nightclub, bar, etc.



Compatible with Kenwood Radios As Follow:

NX-220 NX-320 NX-240 NX-340 NX-420

TK-208/2100/2102/2130/2160/2170/220/2212/2300/2312/2360/240/240D/2400/248/250/TK-255/260/260G/270/270G/272G/278/278G

TK-308/3100/3101/3102/3107/3118/3130/3131/3160/3170/3173/320/3200/3201/3202/3233207/3230/3312/3360/340/340D/3400P/348/349/350/353/360G/370/370G/372G/373G/378/378G

TK-430/431

TH-F6/F6A/D7/D7A/D7AG/D7E/F7/F7E/G71/G71A

TH-G71E/K2/K2A/K2E/K2ET/21/21AT/21BT/22

TH-22A/22AT/22E/25/26/27/28/31AT/31BT/41AT/41BT

TH-42/42A/42AT/2E/45/46/47/48/55/75/77/G71

TH-205/215/225/235/235A/235E/315/41



Compatible with HYT/Hytera Radio As Follow:

TC-2088/2100/286/2685/278/386/378//3865/388/6685



Compatible with BaoFeng Radio As Follow:

UV-5R/5RA/5RA+/5RB/5RC/5RD/5RE/5RE Plus/UV-82/BF-480/490/530/999/888/777/666S/777S/888S



Compatible with PuXing Radio As Follow:

PX333/888/888K/328/358/999/666/777/777PLUS



Compatible with WouXun Radio As Follow:

KG-UV1D/KG-UV2D/UVDIP/KG-669/659/679/689/639/699/801



Compatible with QuanSheng Radio As Follow:

TG-K4AT/2AT/22AT/45AT/42AT/25AT/UV



Compatible with Arcshell Radio As Follow:

Arcshell AR-5,Arcshell AR-6

• Built in Microphone and Speaker - There is a red transmit LED light for convenient usage. Remote directional Microphone & Speaker transmits high quality sound even in loud environments and helps to provide a really perfect long range distance communication.
• There is a 3.5 mm earpiece jack on the mic for discreet communications, and it will cut the audio from the speaker when properly inserted. The spring clip on the back rotates to help you position your mic.
• These mics will clip to our backpack straps at our shoulder or in front for easy access and convenient communications. It is also easier to use these mics while in the car with your handy-talkies.
• Clip holds on tight and will not fall off randomly. Cord is strong and coil allows for good flexibility and reach.
• Remtise Speaker Microphone is most popular in police and security personnel, and mostly used for patrol duty, large team activities, business activities and senior entertainment venues.

User questions & answers

Question:	Does plugging an earpiece into the 3.5mm jack silence the audio output from the speaker
Answer:	This works perfectly with a bass guitar!
Question:	My friend ordered this microphone for my P3 Network radio will it work.. If not do you have one that will
Answer:	It does not latch, we use it dor lead vocal to speak only into that bands IEM if needed during set, works great and no pop at all really clean switch back and forth
Question:	What type of 3.5 mm jack is installed in the speaker/mic? ts, trs, or trrs (mono audio, stereo audio, or stereo with mic support
Answer:	No indicator light.
Question:	It says it’s compatible with xpr3300 but, is it compatible with xpr3300e
Answer:	We have not heard of this issue yet from anyone.