10 best cb ground covers
CB ground covers, in the context of antennas and two-way radios, refer to materials or devices used to create an effective electrical ground connection for CB (Citizens Band) radio antennas. Grounding is crucial in CB radio installations to ensure efficient transmission and reception of signals while minimizing interference and electrical hazards. Here are some key points about CB ground covers:
Purpose of Grounding: Grounding is essential in CB radio setups to provide a low-resistance path for electrical currents, such as lightning strikes or static discharge, to safely dissipate into the Earth. It helps protect the equipment and prevents electrical damage.
Ground Cover Materials: Ground covers can consist of various materials, such as copper or aluminum grounding rods, ground wires, grounding plates, or grounding grids. The choice of material depends on factors like the soil type, climate, and the specific installation requirements.
Grounding Rods: Copper or aluminum rods are often used as grounding rods. They are typically driven into the ground and connected to the CB radio system through a grounding wire.
Grounding Plates: Grounding plates are flat metal surfaces that can be buried underground and connected to the radio equipment through grounding wires. They provide a larger surface area for grounding, which can be beneficial in areas with high lightning activity.
Grounding Grids: In some installations, grounding grids, consisting of a network of interconnected grounding wires or plates, may be used. These grids distribute electrical currents evenly across a larger area, reducing the risk of equipment damage.
Proper Installation: Proper installation of the ground cover is crucial. The ground wire should be securely connected to the antenna mast or tower and then routed underground to the grounding element (rod, plate, or grid). It should also be connected to the CB radio equipment and any lightning arrestors or surge protectors.
Safety: Grounding not only protects the equipment but also enhances safety. It reduces the risk of electrical shocks and fires in the event of lightning strikes or electrical faults.
Compliance: Installations of CB radio systems, including grounding, should comply with local electrical and safety codes. It's essential to follow recommended practices to ensure compliance and safety.
Maintenance: Regular inspection and maintenance of the grounding system are essential to ensure its effectiveness. Connections should be checked for corrosion, and any damage or degradation should be promptly addressed.
In summary, CB ground covers play a crucial role in ensuring the safety and proper functioning of CB radio systems.They provide a low-resistance path for electrical currents to dissipate into the ground, protecting equipment and enhancing safety in CB radio installations. Proper installation and maintenance are essential for their effectiveness.
Below you can find our editor's choice of the best cb ground covers on the market
Buffalo Blizzard Deluxe Winter Cover for 24-Foot Round Above-Ground Swimming Pools | Blue/Black Reversible | 3-Foot Additional Material for Secure Installation
- INVEST WITH DURABILITY - The Deluxe Winter Cover is both an economical and effective choice for your winter closing needs. It is both lightweight and a cinch to install. The Deluxe Winter Cover comes in reversible blue or black convenient color options. Dollar for Dollar you won't buy a better cover!
- FULLY COVER YOUR POOL - The Buffalo Blizzard Pool Cover comes with 3 ft. of overlap making it a 27’ round cover, allowing for a secure installation. This additional material is used to compensate for lower water levels, use of an air pillow and the swimming pool top rails. Secure this cover to your swimming pool with grommets placed every 3’. Includes a vinyl coated cable and winch.
- DRAIN THE RAIN - Winter covers are designed to protect your swimming pool against rain, snow and high winds. It is highly-recommended that all excess water be removed from atop the cover during the off-season. This will extend the longevity of the material and can be accomplished with the use of a cover pump or siphon.
- DESIGNED TO DEFEND - Close your swimming pool confidently with double stitched and triple thick hems using UV resistant nylon threads that are used to withstand the sun. This lightweight cover has 8x8 scrim per square inch.
- WINTER IS APPROACHING - The installation of a winter cover will likely require some assistance from friends, family or a friendly neighbor. In advance of seeking help, the water level should be lowered beneath the skimmer, winter plug inserted and the water winterized with closing chemicals.
User questions & answers
| Question: | Is this water proof- I want to use it Ike a tarp to keep something dry |
| Answer: | This is when new, don't know how long it will stay that way over the years. Mine has been setting on the pool for about a month and I don't see any seepage. Also, after a rain, the water stands in pockets on the top. After pumping the water off, the top dries and no leakage is noticed. Hopes this helps. |
| Question: | I see the delivery date is any where from August 30 to October 7. How long did it take to actually receive it |
| Answer: | It took 3 days, but was a Amazon Prime order, 1 extra day, no biggy... |
| Question: | Does this cover let water in |
| Answer: | No, not while new, but as the cover ages it probably will as the strands start to separate |
| Question: | What size cover should i buy for a 24 foot round pool |
| Answer: | I own a 21' round above ground and have always purchased a 21' round cover....until this year ! I will from now on buy only 24' covers because they allow extra room without overstretching and blowing out the seams from rain water accumulation. Should have done this from the get go ? Hope that helps ? |
Product features
Blocks Debris
Material is made of double stitched and triple thick hems, this durable cover prevents unwanted debris from falling into your swimming pool.
Additional Material
An excess overlap material is used to compensate for lower water levels, use of an air pillow and the swimming pool top rails.
Fights Against the Weather
Winter covers are designed to protect your swimming pool against rain, snow and high winds.
Protect Your Cover
It is highly-recommended that all excess water be removed from atop the cover during the off-season. This will elongate the longevity of the material and can be accomplished with use of a cover pump or siphon.
Suggested Additional Products
Use any of these additional Buffalo Blizzard products to assist your winter cover during the harsh seasons. These items do a variety of things from holding down your cover against high winds to reducing excess rain, snow and leaf build-up atop your winter cover.
Crystal Blue 18S-8 Box-CB Solar Pool Cover, ft. Round
Crystal Blue
Product description
The crystal blue heavy-duty solar cover for above ground swimming pools is made of heavy-duty polyethylene material that works with the sun to catch & retain heat. Solar covers float "bubble side down" on the surface of your pool water when the pool is not in use, allowing solar energy to pass through & trapping it as retained heat in the pool.
- Extends Swimming Season
- Increases Pool Water Temperature By Up To 10 Degrees Fahrenheit
- Cuts Evaporation By Up To 90%
- No Assembly Required
Crystal Blue 1632RS-8 Box-CB Solar Pool Cover, 16 x 32 ft
Crystal Blue
Product description
The crystal blue heavy-duty solar cover for in-ground swimming pools is made of heavy-duty polyethylene material that works with the sun to catch & retain heat. Solar covers float "bubble side down" on the surface of your pool water when the pool is not in use, allowing solar energy to pass through & trapping it as retained heat in the pool.
- Extends Swimming Season
- Increases Pool Water Temperature By Up To 10 Degrees Fahrenheit
- Cuts Evaporation By Up To 90%
- No Assembly Required
User questions & answers
| Question: | Is this 12mil |
| Answer: | Solsr pool cover |
| Question: | How many mils? Thickness |
| Answer: | The one I bought is 12 mil. Works really well for us and we get some of the least amount of sunshine in America. |
| Question: | Which side is directly inside the water. The bubble side |
| Answer: | Bubble side down making contact with the water. Allow the recommended time after treating the pool with chemicals before placing the cover on your pool. |
| Question: | What ml is this cover? Is it an 8, 12 or |
| Answer: | 12 |
Coer Butler CB coverbutler Butler Bottom Mount Spa Cover Lifter
Product description
One easy motion lifts any cover & stores it behind the spa. Made of anodized aluminum, it holds up well against weather extremes & will look new for years to come. Reduces wear & tear on the spa cover. Requires only 18" Of clearance from any wall in order to function properly. Low profile design blends easily with any decor. Easy to assemble.
- Annodized Aluminum construction
- Handles most covers up to 99”
- The easiest Lift to install
User questions & answers
| Question: | where is it made |
| Answer: | It is manufactured in China |
Char-Broil 5+ Burner Extra Large Rip-Stop Grill Cover
Char-Broil
Product description
The Char-Broil 5+ Burner Ripstop Grill Cover is an ultra-premium heavy-duty grill cover which offers best-in-class grill protection. 24mil polyester fabric is combined with a PE interior coating, shielding your grill and offering ultimate protection from the elements. The Ripstop series of grill and smoker covers from Char-Broil are up to 7x stronger than most covers in the market, and feature a 5 Year Tear-Free Warranty. Longer, adjustable side-straps help deliver a more secure fit, keeping the grill cover in place during high winds and storms. Ripstop covers include UV protection for fade resistance and sealed seams for water resistance, to help keep moisture out. Designed to fit 5,6 or 7 Burner Gas Grills, X-Large Combo Grills, Charcoal Grills and smokers up to 72 inches wide Measures 72-inches W x 42-inches H x 24-inches D. Universal cover, suitable for use with CHAR-BROIL, WEBER, CHAR-GRILLER, BROIL KING, NEXGRILL, KITCHENAID, EXPERT GRILL & OTHER BRAND GRILLS. 5 Year Tear-Free Warranty.
- Designed to fit 5, 6 or 7 burner gas grills, x-large combo grills, charcoal grills and smokers up to 72 inches wide
- Ultra-premium heavy duty cover features 24mil polyester fabric with interior coating for protection from the elements
- 5 Year tear-free Warranty; 7x stronger than most covers in the market
- Sealed seams for water ressistance, UV protection for fade resistance and adjustable-fit side straps for a more secure fit
- Measures 72-inches w x 42-inches H x 24-inches D
User questions & answers
| Question: | Will this fit model |
| Answer: | Forget the Model number is it a char broil 3 or 4 burner grille? If so it will fit great!!! Not sure specific model numbers |
| Question: | Does this cover fit ( char-broil performance stainless 6-burner liquid propane gas grill with 1 side burner - model |
| Answer: | Yes. This 5+ Burner Rip-Stop Grill Cover will work well to protect your grill. |
| Question: | Will this fit char broil commercial model# 463244011 (4 burners with side burner |
| Answer: | I have the 463280019 and it fits it perfectly with room to spare |
| Question: | Did any one have to register there product? Got mine an no info on it thanks |
| Answer: | Hi. I don't know anything about 'registering' this bbq cover. Came in a box; fit perfectly and looks great through all kinds of weather on the deck. I have a 'Char-Broil' bbq, so wanted to get this one I knew would fit. Very sturdy. |
Crystal Blue 1530S-8 Box-CB Solar Pool Cover, 15 x 30 ft. Oval
Crystal Blue
Product description
The crystal blue heavy-duty solar cover for above ground swimming pools is made of heavy-duty polyethylene material that works with the sun to catch & retain heat. Solar covers float "bubble side down" on the surface of your pool water when the pool is not in use, allowing solar energy to pass through & trapping it as retained heat in the pool.
- Extends Swimming Season
- Increases Pool Water Temperature By Up To 10 Degrees Fahrenheit
- Cuts Evaporation By Up To 90%
- No Assembly Required
Dowco Guardian 26036-00 UltraLite Plus Water Resistant Indoor/Outdoor Motorcycle Cover: Grey, Large
Dowco
Product description
The UltraLite Plus motorcycle cover is a full sized travel cover with a compact design. Cover is made with a 75D rip-stop polyester with polyurethane and mildew-resistant undercoating for enhanced water and mildew resistance. It’s not waterproof, but very close. Two sewn-in vent flaps allow moisture to escape. Soft cotton is used to protect the windshield from scratches. An elastic shock cord is sewn into the bottom of the cover to provide a snug fit. There is also a polyester webbing belly strap sewn-in to prevent the cover from coming off in high winds. Plastic grommets allow the use of a cable to lock the cover to the bike. A compression storage bag is included for quick and easy storage. When the cover is in use, this exterior storage compartment can be used for gloves, sunglasses, or other items.
- Ideal for outdoor usage when traveling as well as short and long-term parking in a garage
- Water and mildew resistant
- Soft cotton is used to protect the windshield
- Elastic shock cord sewn-in bottom of cover for a snug fit
- Plastic grommets that allow use a cable lock
User questions & answers
| Question: | Does the yxzctem black & orange motorcycle cover fit a 2017 harley street xg500 model |
| Answer: | It should but these are junk, go to badass moto their covers are heavy duty |
| Question: | When folded up, will this fit into a softail swingarm bag |
| Answer: | If you took the time and folded it I bet it would fit. It came with a small carry bag and will strap on anywhere I bet |
| Question: | Does the xl size really fit a harley davidson flhtk ultra limited |
| Answer: | Not sure about a harley Davidson fly to ultra limited but it is big it fits over my 2008 klr650 with a top box and bags on the sides with room to spare. Not sure if that will help you |
| Question: | what size would you recommend for a triumph thunderbird with bags and a windscreen |
| Answer: | I have an HD Iron 883 and purchased the medium size. Although I don't have bags on my bike, I do have a windshield and find that this works. From the looks of it, the profile of your bike is similar, and a medium should fit, but if you want to be safe, the large is likely the better choice with your shield and bags. |
Product features
Our Top-of-the-Line Light Weight Travel Cover
The Dowco UltraLite Plus motorcycle cover offers you the best combination of protection and light weight for your motorcycle. It provides protection from rain, dust and harmful UV rays unlike any cover on the market. Don't be fooled by competitors, only Dowco has been designing and manufacturing motorcycle covers since 1977! Be sure to check out our raving customer reviews about the product and how we handle claims. If you want great protection and the peace of mind knowing Dowco will back up any issues that may arise, choose a genuine Dowco motorcycle cover!
Water Resistant 75 Denier Rip Stop Polyester Fabric
All Dowco UltraLite Plus motorcycle covers are made with Dowco's durable 75 denier rip stop polyester fabric that offers the excellent UV and water protection for your motorcycle! The material is a light gray color to help reduce the summer heat under the cover.
Double Stitched Seams
Seams on all Dowco UltraLite Plus motorcycle covers are double stitched to help prevent seam failures, the leading cause of motorcycle cover protection failures.
Extra Protection
Dowco UltraLite Plus covers have strategically placed soft cotton protection in areas that may come in contact with sensitive parts of your motorcycle, like your windshield.
Compression Storage Bag
Dowco UltraLite Plus covers include a compression storage bag to help compress the size of the cover for easy storage.
Workman WIL-KIT-W 6 Element Mobile Ground Radio KIT (White TIP Covers)
Workman
Product description
6 ELEMENT RADIAL ANTENNA GROUND PLANE KIT. IMPROVES ANTENNA SYSTEM WITH BETTER GROUND. DESIGNED FOR STANDARD 3/8 X 24 THREADED ANTENNAS. WHITE TIP COVERS ON EACH STEEL ELEMENT
- 6 ELEMENT RADIAL ANTENNA GROUND PLANE KIT
- IMPROVES ANTENNA SYSTEM WITH BETTER GROUND
- DESIGNED FOR STANDARD 3/8 X 24 THREADED ANTENNAS
- WHITE TIP COVERS ON EACH STEEL ELEMENT
User questions & answers
| Question: | What is the length of the radial elements |
| Answer: | about 6 inches. |
| Question: | Will this work as a ground plane for temporary CB base station antenna using a mobile antenna? Or is there not enough metal for a ground plane |
| Answer: | I bought it and put it on the shelf and never used it., so I don't know. |
| Question: | Is the connector an SO |
| Answer: | No it is threaded |
| Question: | Will it work as ground plane for a Workman 102” sswa whip on my home roof |
| Answer: | never used it |
FireStik FG2648-B Two Foot No-Ground Plane CB Antenna kit (Black)
FireStik
Product description
PURPOSE: The FGX-648 (where X = antenna length in feet) series, 'No ground plane" (NGP) CB antenna kits were specifically designed to solve the problems associated with the lack of ground plane. This normally occurs on vehicles constructed of plastic, fiberglass, wood or aluminum. Ground plane problems typically show up in the form of high standing wave ratio (SWR) and poor performance. The isolated ground plane that is built into the FGX-648 series kits can also eliminate problems on metal base vehicles that lack the sufficient ground plane for proper operation.
COMPONENT INFORMATION:
ANTENNA: The antennas used in these kits is altered in order to maintain a desirable center band position when used with the tuned coaxial feedline. Accordingly, these antennas may only be used with the Firestik NGP cable. The antenna used in these kits have our patented "no tools required" tunable tip for fast and easy SWR adjustments. The rated wattage for these kits is 100 watts.
COAXIAL FEEDLINE: The seventeen-foot (5.2 M) coaxial cable used in these kits is of the highest quality. We use a multi-wire stranded center conductor to the prevent breakage that can occur with solid center conductor cable. The coaxial feedline serves as a tuned circuit that creates the necessary counterpoise. If a longer cable length is required, the user may add standard RG-58 A/U cable between the radio and system cable, preferably in lengths that are multiples of nine feet. Because it is a tuned circuit, the length cannot be reduced without causing non-repairable damage.
MOUNT, SPRING AND HARDWARE: To compliment the quality of the antenna and feedline, the mount used in these kits is our stainless steel, 3-way 90° angle mount. A stainless steel spring with machined brass ends acts as the coupling between the antenna and the feedline.
ADDITIONAL FEATURES: Each kit includes a FREE microphone hanger.
- Firestik - fg2648-b 2 foot no ground plane cb single mirror mount antenna kit in black
User questions & answers
| Question: | how long is the coaxial cable |
| Answer: | The seventeen-foot (5.2 M) coaxial cable used in these kits is of the highest quality. As a matter of fact ... our NGP cable assembly utilizes a custom manufactured coaxial cable that can only be found at Firestik |
| Question: | Can this antenna be mounted on lets say a pvc pipe or wood with zip ties, in order to use as a portable base antenna? would one need anything else |
| Answer: | Since this antenna design provides its own ground plane I believe it would work mounted on any type of material. |
| Question: | Does this antenna come with a mirror mount |
| Answer: | Yes it does. |
| Question: | Can this be used without the spring |
| Answer: | Yes, it can be used with or without the spring. I initially installed it with the spring but, traveling down the highway, the antenna moved around too much, especially in strong winds. |
FireStik FG4648-B Four foot No-ground plane CB antenna kit (Black)
FireStik
Product description
PURPOSE: The FGX-648 (where X = antenna length in feet) series, 'No ground plane" (NGP) CB antenna kits were specifically designed to solve the problems associated with the lack of ground plane. This normally occurs on vehicles constructed of plastic, fiberglass, wood or aluminum. Ground plane problems typically show up in the form of high standing wave ratio (SWR) and poor performance. The isolated ground plane that is built into the FGX-648 series kits can also eliminate problems on metal base vehicles that lack the sufficient ground plane for proper operation.
COMPONENT INFORMATION:
ANTENNA: The antennas used in these kits is altered in order to maintain a desirable center band position when used with the tuned coaxial feedline. Accordingly, these antennas may only be used with the Firestik NGP cable. The antenna used in these kits have our patented "no tools required" tunable tip for fast and easy SWR adjustments. The rated wattage for these kits is 100 watts.
COAXIAL FEEDLINE: The seventeen-foot (5.2 M) coaxial cable used in these kits is of the highest quality. We use a multi-wire stranded center conductor to the prevent breakage that can occur with solid center conductor cable. The coaxial feedline serves as a tuned circuit that creates the necessary counterpoise. If a longer cable length is required, the user may add standard RG-58 A/U cable between the radio and system cable, preferably in lengths that are multiples of nine feet. Because it is a tuned circuit, the length cannot be reduced without causing non-repairable damage.
MOUNT, SPRING AND HARDWARE: To compliment the quality of the antenna and feedline, the mount used in these kits is our stainless steel, 3-way 90° angle mount. A stainless steel spring with machined brass ends acts as the coupling between the antenna and the feedline.
ADDITIONAL FEATURES: Each kit includes a FREE microphone hanger.
User questions & answers
| Question: | Can i use this antenna with a firestic magnet mount and put on a metal roof |
| Answer: | No because CB radios need a good ground. They make specific ones for CB's. |
| Question: | Will this antenna work with my cobra 29ltd |
| Answer: | It should be fine. The antenna cable to cb fitting is the same as for any other cb. |
| Question: | I'm looking to purchase the Midland 75-822 portable. Will this antenna provide for better range |
| Answer: | Any antenna designed as an external antenna for the CB band frequencies will provide better transmit and receive range. However the antenna you described is meant for vehicles and other applications that do not provide ground planes like boats and fiberglass campers or trailers. That antenna has a dedicated coax cable that comes with a built in gamma matching section near the antenna of the cable. It is intended for use as a compromise to get around the missing ground plane of non metallic vehicles. I guess it also work fairly mounted on the eve of a house. If you’re looking to use it on a car or truck I’d go with a magnetic mount style antenna instead like a K-40 type, Wilson 1000 or 5000 or something like that. |
| Question: | How flexible is the antenna? I want to mount to the roof of my wrangler but will need to tie it down when driving to avoid low clearance obstacles |
| Answer: | If you are mounting it on the roof, then you will probably have to take it off. It is flexible but no so much that you could tie it flat. Mine sticks up about 3 feet above the roof and it will bend under obstacles. |
Latest Reviews
View all
Apple I7 Processors
- Updated: 05.04.2023
- Read reviews
Mitchell Rod And Reels
- Updated: 10.02.2023
- Read reviews
Dingo Puppy Treats
- Updated: 25.06.2023
- Read reviews
Sony Lightweight Laptops
- Updated: 02.02.2023
- Read reviews
Bunk Bed For Dogs
- Updated: 27.07.2023
- Read reviews