14 best lp audio interfaces

Product description

Fly Kan USB 2.0 Audio Capture Card

Re-discover the beauty of those good old music with the help of this USB audio capture device. Users may also use this usb audio grabber to convert old collection of cassettes, vinyl records and LPs into crisp, clear digital audio files for music on the go and then create audio CDs and MP3 CDs for personal audio library and make archive of life-time collection that will not degrade or deteriorate over time.



Great tool to capture and edit audio to digital format on your computer before transfer to Phone or other portable audio players. This easy-to-use USB converter provides users an easy solution to digitize analog audio feed into digital format through the convenient USB interface. There is absolutely no driver installation needed at all for operation inWindows 10 / 8.1 / 8 / 7 / Vista / XP & Mac OS10.14



Feature:

■Digital Cleaning Process And Effects.

■Super Easy Setup,just Plug and play,no drivers.

■Cross-Platform Audio Recorder Editor Software.

■Recording From Microphone/Line In/Auxiliary Input.

■Digital Audio Recording. This USB audio unit supports audio recording from two types of audio inputs, one in 3.5mm stereo mini and the other in RCA phono L/R.



Connection hints:

Do not connect a turntable directly to your computer. The signal from a turntable must be passed through a phono pre-amplifier or a receiver with a “phono” input that provides phono amplification. Otherwise, it will be too quiet and will also sound "tinny" due to incorrect equalization.

Do not plug stereo equipment into your computer’s “Microphone” port. This port is usually designed only for low level, mono microphone input. It will produce distortion if you connect phono amplified output. Use the “Line In” port if you have one (on some laptops or other portable computers, the "Mic" port can be switched to a line-level input).

• USB audio grabber,3.5mm and R/L audio connector input, usb to pc, record audio into computer and convert into MP3/WAV
• Audio capture card,Plug and play, no extra power supply. Support Audio capture card,Plug and play, no extra power supply. Support Windows 10 / 8.1 / 8 / 7 / Vista / XP and Mac OS 10.7-10.14. (Not support Mac OS10.15).Notice:Audacity can be installed on Raspberry Pi 3B.
• Coming with professional audio capture/converting software ( Audacity) and online updating.
• This usb audio digitizer(audio converter) make user easily record live audio or transfer analog to be digital formats such as MP3, WAV. User can save&listen music on MP3 player, computer, portable CD player, or car stereo or home stereo system.
• To record and convert classic vinly turntable LP or cassette tape music audio to be MP3/WAV digital formats.Convert cassette tape to cd.Note:If you have a standalone turntable but no amplifier or pre-amp, you may want to consider the Behringer UFO202 or the ART USBPhonoPlus. These devices contain a built-in phono pre-amp and connect to your computer through a USB port. They can also be used to connect line level devices such as a cassette deck.

User questions & answers

Question:	Will it work with Mac OS 10.13.2 (high sierra
Answer:	I had no sound when plugged into the back of my flat screen, then I plugged it into my cable box and works excellent.
Question:	Does the Audacity software include the Lame program so that wave files can be exported as mp
Answer:	It should as long as there are some rca jacks I use it on an older stereo to hook up phones or ipods
Question:	what plugs into what
Answer:	The length is 8 inch.
Question:	Does this convert analog audio input into digital audio output
Answer:	I bought these because my parent's tv did not have a headphone jack. It was recommended by a Best Buy salesperson. Worked for me.

Product description

USB Audio Interface with 16 Unbalanced Outputs, Stereo Auxiliary Input, and MIDI In/Thru

• USB Audio Interface with 16 Unbalanced Outputs
• Stereo Auxiliary Input
• MIDI In/Thru

Product description

Looking for a simple, affordable way to get your music into the digital realm? Or maybe you'd like to connect your computer to an external effects unit or recorder? Want to transfer your old cassette tapes to CD before the oxide falls off the tape? The fastest, easiest way to get analog audio into your computer is with the U-CONTROL UCA222 Audio Interface.

The fastest, easiest way to get analog audio into your computer. Click to enlarge.

S/PDIF optical output and headphone out with volume control.

Includes software such as XT Software's energyXT for recording right out of the box.

PC and Mac Ready

This ultra-compact, USB-powered device lets you connect your PC or Mac computer to virtually any piece of audio gear. It gets its power from your computer's USB bus, so no external power supply or batteries are required. And the UCA222 requires no special setup or drivers--just plug it in to a free USB port and start recording.

Versatility

The UCA222 features two analog mono inputs for connecting any line-level device, such as a mixer or tape deck, and two analog mono outputs for connecting active speakers or studio monitors. On the digital side, the UCA222 provides USB connectivity and an additional S/PDIF optical output for direct analog-to-digital conversion. The stereo headphone output has a dedicated level control and allows you listen to either the input source or the computer output.

Plenty of Options

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222's RCA outputs to the TAPE INPUT jacks of your mixer or active monitors, or directly into the input channels of the mixer. Connecting to mixer input channels gives you access to equalization and allows you to use the AUX Send features of your mixer to build extremely versatile monitor mixes for your recording sessions.

Tons of Free Software

Because you'll want to take full advantage of the UCA222's podcasting and recording potential we've included a massive software package including Audacity, Podifier, Juice, Podnova and Golden Ear. You're ready to go live on your Mac or PC computer right out of the box! You also get more than 100 virtual instruments and over 50 effects plug-ins, turning your computer into a complete home-based or mobile recording studio from input to output.

When you're ready to take your recording projects to the next level, XT Software's energyXT is just the trick. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode.

Great Value

For a fraction of the cost of other USB audio interfaces, you can have state-of-the-art digital conversion, world-class recording and editing software, and hassle-free connectivity between your PC or Mac Computer and any piece of audio gear.

What's in the Box

U-CONTROL UCA222 Audio Interface,  User's Manual

• Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
• Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
• Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
• Works with your PC or Mac computer - no setup or drivers required
• Stereo Headphone output with dedicated Level control lets you monitor both input and output
• Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer
• Bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins

User questions & answers

Question:	Will this device be able to take a stereo signal, have it processed by a linux machine and then output the modified stereo signal to it's RCA outputs
Answer:	If the device is plugged into the linux machine via the USB cable, it will do this for you. With this hookup, it will produce a 2 way signal, even simultaneously, 1 going into the computer, 1 coming out from the computer. If need be, it’s even capable of looping an output signal back in, say to a recording app on your computer. Just make sure you flip the little black monitor switch to the off position to eliminate distortion, and the signal looping back in will be crystal clear and strong.
Question:	Do I need to buy a separate cable to use this product? I'm not really sure how the I/O system works. Can someone explain? Thanks
Answer:	Not sure of your intended use for this product.I bought the UCA222 because the earphone jack on my Dell laptop went bad. It worked really well for my needs, it has a USB plug that connects to the standard USB port on my laptop. Then I connect my earphones to a standard plug on the device. No other cable required for me.
Question:	Can you connect to a USB power supply and use the analog to S/PDIF output
Answer:	I don't know about the S/PDIF but I suspect it won't work very well. I tried using the analog in to headphone jack using a USB power supply and it sounded terrible. I thought it would be a way around having to use a computer and it didn't work. Once I plugged the UCA222 into a laptop instead of a power supply it sounded way better.
Question:	Can I connect 5 of these to get 10 independent audio output channels generated by the computer via usb
Answer:	There's nothing technically preventing you from connecting 5 of these to get 10 independent audio outputs. If your software supports it, your computer will just see them as 5 individual audio cards. The problem your likely to run into is your computer does have a limit on how many USB devices can function simultaneously (USB Bandwidth). One way around this problem is to use a Quad USB PCI Card, that has 4 USB port and each one in it's own controller. The next thing you will need to consider is how many PCI lanes you have (will determine how many USB controllers your PCI bus can support) Hope this helps.

Product features

U-CONTROL UCA222

The U-CONTROL UCA222 allows you to connect instruments and other audio devices to your computer, effectively merging the analog and digital worlds.

It accomplishes this by providing two analog mono Inputs and Outputs (for monitoring), USB connectivity and an additional S/PDIF optical output. The stereo headphone output features a dedicated level control and lets you listen to both the input and output. We even give you all the software you’ll need to get started!

Tons of Free Software

To truly get the most out of your UCA222, you will need recording and editing software. So, we made it easy, providing a single place for you to download lots of free software including: Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X and Linux operating systems. With Audacity you can: - Record live audio -Convert tapes and records into digital recordings or CDs - Edit Ogg Vorbis, MP3, WAV or AIFF sound files - Cut, copy, splice or mix sounds together - Change the speed or pitch of a recording - And much more.

Imagine the Possibilities

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely-versatile monitor mix for recording sessions.

Compose. Record. Mix. Share

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Value

For a mere fraction of the cost of an over-priced USB audio interface from those other guys, you can have state-of-the-art digital conversion, world-class recording and editing software and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment.

Bridging the gap between your music and the rest of the world – the U-Control UCA222. Check one out at your local Behringer dealer, or place your order online today.

Product description

It is very easy for you to re-discover the beauty of those good old music with digitnow USB audio capture. Convert old collection of cassettes, vinyl records and LPs into crisp digital audio files for music on the go and then create audio CDs and MP3. CDs for personal audio library and make archive of life-time collection that will not degrade or deteriorate over time.

• USB audio grabber with 3.5mm and R/L audio connector input, via usb connected to pc, recording audio into computer and convert to MP3/WAV
• Audio Capture Card, Plug and play, no extra power supply. Easy to record from Microphone/Line In/Auxiliary input
• Coming with professional audio capture/converting software ( Audacity) and online updating
• Easily recording live audio or transfer analog to be digital formats such as MP3, WAV. User can save & listen to music on MP3 player, computer, portable CD player, or car stereo or home stereo system
• Supporting OS: Windows 10 / 8.1 / 8 / 7 / Vista / XP, Mac OS 10.11 and more.

User questions & answers

Question:	Does this work as an indirect mic capture through OBS
Answer:	contact amazon and have your credit card company remove the charge
Question:	Does it work with macOS 10.14.6 Mojave which is 64 bit
Answer:	it only works for the 2 fingers at the pinky end. but you need a 10 foot long hand for it to fit right
Question:	What provides a result with better sound quality -- this USB audio capture device or the tape cassette converters
Answer:	The product is adjustable and will fit any size.
Question:	Can i plug my old gerrard turntable directly into this unit (i.e. into the rca jacks/plugs), or will i need a preamp to boost the line-level
Answer:	Well... this is splint material used for immobilizing a limb due to an injury. Not sure I understand the question or why? But it works well to immobilize a limb.

Product features

AM FM Radio to digital

cassette tapes to MP3

vinyl records to digital

• Cassette Tape to MP3 CD - Easily Transfer Old Cassette tape from Boombox Walkman Cassette to MP3 Digital Formats
• Minidisc Player to MP3 - Digitize Music Audio Files via Walkman MD Player from Analog Audio to Digital Formats
• AM FM Radio Audio Digitizer - Ideal for Collect your favorite live in Music Audio from AM FM Radio to MP3 Wav via 3.5mm Jack
• RCA R/L Audio to Digital - Safe to Convert Audio Sources from RCA(R/L) Component Device Player to MP3 PC Mac
• DO NOT connect a turntable directly to your computer

User questions & answers

Question:	I'm concerned that this will pick up background noise from the room where I'm working
Answer:	HOW TO CONNECT MD1 WITH IOS DEVICE? 1. Turn on the power of the MIDI device with the MD1plugged in, and confrm that the blue LED flashes slowly. 2. Click the [Sttings] icon to open the sttings page, click [Bluetooth] to enter the Bluetooth setting page, and slide the Bluetooth switch to turn. on the Bluetooth functionality. 3. Go to the Apple AppStore to search and download the free application [midimittrl. 4. Open the midimitt App, click the [Device] menu at the bottom right of the screen, find the MD1 that appears under the list, click [Not Connected], and click [Pair] on the Bluetooth pairing request pop-up window, the status of MD1 inthe list will be updated to [Connected], indicating that the connection is successful. Thenyou can press the Home button of the iOS device to minimize midimittr and keep it running in the background. 5. Open the music app that can accept external MIDI input, and select MD1 as the MIDI input device on the sttings page, you can start using it.
Question:	I must rephrase my question. Which app can i use this cabel with on chrombook to record mp3 files from vinyl
Answer:	Dear customer, No need to upgrade for some time now. Connecting MD1with IOS device ,please go to the Apple App Store search for the free application [midimittr] and download it.
Question:	Will the adc keep the two-channel stereo input from my cassette deck separate, i.e., show up in audacity channel graph as separate signals
Answer:	Not at all,automatically connect. no setup needed. cool!
Question:	Can I use to record vinyl onto a Chromebook? Please advise
Answer:	There is no difference in use, personally I feel that xvive works even better,widi master have some latency

• Professional Audio Grabber, Plug and play, no extra power supply. Transfer Analogue Audio ( Cassette Tapes, LPs, Radio Player) to USB PC Mac into MP3 CD.
• USB Audio Grabber with 3.5mm and R/L Audio Connector Input, via USB Connected to PC, Recording Audio into Computer and Convert to MP3/WAV.
• Professional Audio Capture and Edit Software ( Audacity) is Included or Updated on Official Website.
• Please Note: this Audio Capture Card is for Common usage. Please Choose Other Professional Device if You Have Professional Requirements.
• Support Windows 10 / 8.1 / 8 / 7 / Vista / XP and Mac OS 10.7-10.14. (Not support Mac OS10.15)

User questions & answers

Question:	can i save MP3 to media player
Answer:	I don't have a mac. But before I bought this I did research to see if it would work for my application. I suggest that you do the same.
Question:	Have an aiwa cassette/cd player with red & white input plugs. will input plugs work to output to digitnow
Answer:	The way this system is designed is basically a sound capture and conversion. So, what every device your using to record from this software will capture it and convert it to MP3. Just make sure you select the appropriate conversion type. (Record to MP3, WAV to MP3, ect.)
Question:	What is the total length of the cables
Answer:	For example: usb2.0 plugs into PC, white and red audio connect with DVD, or 3.5mm Audio plugs into cassette recorder
Question:	Records outside sounds. Is there a way to stop this
Answer:	The SB2.0 Audio Capture Card-...Does this convert analog audio input into digital audio output? asked by Jesse Gibson on January 17, 2017 The USB2.0 Audio Capture does convert analog input to a digital audio file.

Product features

vinyl records to digital

cassette tapes to MP3

AM FM Radio to digital

Product description

Delivering the convenience of a professional sound studio on the go, the MOTIV MVi Portable Digital Audio Interface connects any standard XLR microphone or 1/4 " plug guitar, bass, or keyboard to any Mac, PC, iPhone, iPod, iPad or Android device for seamless, high-quality audio capture. Equipped with 5 built-in DSP preset modes (Speech, Singing, Flat, Acoustic Instrument, Loud), the MVi includes a unique onboard touch panel control for quick access to gain, mute and headphone volume adjustments in real time. A portable, low-profile footprint with all-metal construction that is designed, built and rigorously tested by Shure to ensure reliable performance in any environment.

• Digital audio interface connects a professional XLR microphone or 1/4" instrument output to a computer or mobile device
• Features include 5 DSP preset modes for EQ, compression, limiter settings, gain control, mute, and volume, and phantom power
• 5 DSP preset modes (speech, singing, flat, acoustic instrument, loud) for EQ, compression, and limiter settings
• Touch panel provides control for gain, mute, and headphone volume
• Manual audio settings can be adjusted via iOS devices with Lightning Connector, using the ShurePlus MOTIV app
• JFET Class A buffered instrument preamplifier input for exceptional tone and clarity
• Combined XLR microphone and 6.3 mm instrument input

User questions & answers

Question:	Does mvi work standalone , not connected to smartphone/laptop etc, instead connect 5v charger, input from instrument/mic, you hear by headphone out
Answer:	Hi Lea, I haven't experienced any background noise from the room while transferring any audio. I transferred a few audio cassettes directly into Apple Quicktime audio on my Mac without any noise. The recordings seem to be based on the quality of the original tape. Good luck!
Question:	Can this take a direct line level send output from a sound board, or is the signal level to high
Answer:	audio evolution, fl mobile
Question:	shureplus motiv app" is available to enhance the mic inputs. does this app also work on the giutar input? does it all work with garage band? thanks
Answer:	I assume you meant to say "stereo output" not "input." I don't use Audacity because I've already been using Sound Studio. On Sound Studio it shows the separate stereo signals. I assume Audacity would too. The cable simply works to adapt the rca plugs to USB.
Question:	works with smule sing
Answer:	Hi, as long as the Chromebook has a USB-C input and you have a USB convertor, the Audio Capture Card Device should work for standard audio conversions (from a cassette deck, for example). But the USB Audio Capture Card Device doesn't have a phono convertor on it. If your turntable has a standard RCA stereo cable output and converts the signal from vinyl to analog audio, this might work. I use a separate USB convertor for vinyl record conversion to digital audio files. Good luck!

Product features

MVi

ShurePlus MOTIV App

Every operation needs a mission control, and ShurePlus MOTIV is just that. Designed for use with all MOTIV products, the free app provides an arsenal of smart features that will help you optimize your sound on the move. It also lets you share your files via email, text and SMS, and allows for real-time adjustments.

Smart Technology, Retro Design

Connect any standard XLR microphone or ¼-inch plug for guitar, bass or keyboard to any iOS device, Mac or PC for seamless, high-quality audio capture.

Equipped with five built-in DSP preset modes, MVi offers the convenience of a studio in a compact size. An intuitive touch panel allows volume, gain and mode selection adjustments.

MVi includes both a Micro-B-to-USB cable for connection to a PC, Mac or Android device and a Micro-B-to-LTG cable for connection to Apple mobile devices.

System Requirements

Windows: Windows 7, Windows 8; 64 MB minimum RAM; USB 2.0.

Macintosh: OSX Lion 10.7, OSX Mountain Lion 10.8, OSX Mavericks 10.9, OSX Yosemite 10.10; 64 MB minimum RAM; USB 2.0.

iOS 7.0 and higher: iPhone 5, iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus; iPod touch 5th generation; iPad 4th generation, iPad Air, iPad.

Air 2; iPad Mini 1st generation, iPad Mini 2nd generation, iPad Mini 3rd Generation.

System Requirements (cont'd)

MOTIV Digital Microphones and Recording Solutions are compatible with Android devices that support USB Audio Class 2.0 and Micro-B OTG (On-The-Go) connectivity. Not all Android devices are compatible. You’ve got the gear. And with the MVi, capturing your sound is easier than ever.

MOTIV Digital Microphones and Recording Solutions

Legendary performances can happen anywhere. Capture them with plug-and-play digital recording that comes with ninety years of experience. MOTIV Digital Microphones and Recording Solutions are the powerfully compact, stylish and solid solution. The MOTIV suite makes recording simple and accessible. With seamless Mac/PC/iOS integration, and the free ShurePlus MOTIV mobile app for recording and monitoring with all of the MOTIV digital microphones, the focus is on getting the best take—at home or on the go.

Product description

Accurate sound from your studio monitors no matter where they’re placed in the room.

For the aspiring music maker looking for a professional solution to mix their music and reference their tracks, Kali Audio's LP-6 Lone Pine 6.5-inch Studio Monitors are an excellent tool. This monitor is designed to deliver transparent sound for creators working across all genres and features Boundary EQ settings to optimize the speaker's response depending on where it is placed in your room. An advanced waveguide, large voice coil and precision tuning mean this monitor will sound great in any space.

The LP-6 audio monitor is designed so you can hear every detail of your mix. Nothing is boosted or suppressed to cover flaws in your tracks, so you will be able to mix with critical precision to mix with confidence and create incredible sounding finished productions. This detailed sound is, in a large part, owed to the monitor's 3-D Imaging waveguide. This waveguide allows you to hear a 3D soundstage from a stereo pair of monitors.

By matching the shape of the waveguide to the interactions of the high and low-frequency drivers, this waveguide produces a stereo image that is wider, taller and deeper than the space where the speakers are placed. The LP-6 accomplishes this by ensuring that the speaker's reflected sound matches its direct sound. Every time you hear a loudspeaker, you're hearing both the direct sound from the speaker and reflections from the speaker's signal bouncing off of objects in the room. When those reflections are congruent with the direct sound from the speaker, listeners perceive a better sound overall and are able to make out very subtle details like where microphones are placed in a room. When done well, the stereo image will be three-dimensional. This gives users a very high degree of confidence in their mix. It allows them to mix faster and produce better mixes overall.

• 3D IMAGING WAVEGUIDE- Allows you to hear a 3-D soundstage from a stereo pair of speakers.
• DUAL LAYER VOICE COIL- The voice coil on the LP-6 studio monitors allows the speaker to have very high excursion, resulting in clearer sound with lower harmonic distortion, and exceptional dynamic range.
• LOW NOISE PORT TUBE- The LP-6 has the clean, punchy bass of a front-ported speaker with very low noise from the port tube.
• BOUNDARY EQ- Kali Audio’s signature Boundary EQ settings help you achieve optimum sound in your recording environment while maintaining neutral sonic reproduction in a variety of settings.
• HIGH OUTPUT AUDIO MONITORS- With 85 dB continuous output at 2 meters (roughly 6 feet,) and 20 dB of headroom, the LP-6 is plenty loud for almost every 1 or 2 person listening space. This includes home studios, editing bays, and most control rooms.

User questions & answers

Question:	Would you suggest the factory foams are a better fit than buying a separate set of isolation foams
Answer:	If you're talking about Windows media player, the answer is yes. I keep a file where i save all my mp3 music and drag and drop it into my media player. I think it then gets converted to its own format but the info and tracks remain.
Question:	So what’s the deal with the hiss? Do they all do that or is it a setup issue? Can it be resolved
Answer:	No, that input is used to play another audio source through your Aiwa. If you're looking to digitize old cassette tapes, the DigitNow does have a 1/8 audio plug. This can be plugged into the headphone jack on your Aiwa (depending on the headphone jack, you may need a 1/8 to 1/4" adapter) to transfer your music to your computer. You will need to keep the volume somewhat low, so the sound doesn't become distorted.
Question:	Should i get these or the adams ax
Answer:	3ft or 36in
Question:	Are these sold as a Pair or individually
Answer:	Check on the Audacity wiki site online. There may be some information there to help with settings for your computer.

Product features

Kali's debut LP-6 & LP-8 studio monitors are designed to give you world-class power and accuracy without breaking the bank.

Kali Audio's Lone Pine Series studio monitors are designed to allow you to hear every detail that's happening in your mix. This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you'll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing. With the LP-6 and LP-8, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.

Advanced Imaging Technology

The 3-D Imaging Waveguide allows you to hear a 3-D soundstage from a stereo pair of speakers. By matching the shape of the waveguide to the interactions of the HF and LF drivers, this waveguide produces a stereo image that is wider, taller, and deeper than the space where the speakers are placed. The LP-6 accomplishes this by ensuring that the speaker’s reflected sound matches its direct sound. Every time you hear a loudspeaker, you're hearing both the direct sound from the speaker, and reflections from the speaker's signal bouncing off of objects in the room. When those reflections are congruent with the direct sound from the speaker, listeners perceive a better sound overall, and are able to make out very subtle details like where microphones are placed in a room.

When done very well, the stereo image will be three-dimensional. This gives users a very high degree of confidence in their mix. It allows them to mix faster, and produce better mixes overall.

ACCURACY

The single most important aspect of a studio monitor is its accuracy. A good studio monitor should present the material it’s playing faithfully, allowing you to make critical decisions that you know will translate to all the systems that your work will ultimately be played on.

POWER

Both models use 40W for the 1” soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.

EASE OF USE

Combined with the LF and HF trims, our speakers sound their best no matter what room you’re mixing in, or where the speakers are placed. The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack.

Product description

The simplest model in the range, the third-generation Scarlett Solo provides singer-songwriters with a reassuringly easy recording process. Equipped with high performance 24-bit/192kHz AD-DA converters, Scarlett S the same professional sound quality throughout the third-generation range. Its features include a single upgraded third-generation Scarlett mic preamp: with a switchable air setting to reproduce the air effect of Focusrite's original ISA mic preamp, giving your vocal recordings a brighter and more Open sound. The high impedance, high-headroom instrument input allows you to record guitar or bass without any clipping or unwanted distortion, while gain Halo metering makes it easy for you to set the input level. And Scarlett Solo's balanced outputs are hum-free when connecting studio monitors with balanced inputs, so you’ll always have pristine audio playback. Scarlett Solo is designed to stand up to days on the road and connects straight to your Mac or PC via USB cable, with no external power required. It comes with all the software tools you need to get started, including two comprehensive digital audio workstations: Ableton Live Lite and pro Tools first Focusrite creative pack. Intuitive enough for beginners yet advanced enough to inspire real creativity with great-sounding effects. Focusrite has partnered with Splice to give 3rd Gen. Interface owners a free month Splice sounds subscription when setting a new Splice account. Splice sounds offers millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily from your favorite producers, sound designers, and artists. Creators use Splice to make all kinds of music, including chart-topping pop, Grammy-winning albums, underground mixtapes, and cinematic scores. As with all Focusrite products, you’ll also benefit from a two-year, award-winning customer support, and membership of their plug-in Collective offering free software downloads and generous discounts. Interested in what headphones are compatible with Scarlett? Search 'Headphones' on the Focusrite help centre for more information.

• One of the best performing mic preamps the Scarlett range has ever seen, now with switchable air Mode to give your recordings a brighter and more open sound. One high-headroom instrument input to plug in your guitar or bass. Two hum-free balanced outputs provide clean audio playback.
• High-performance converters enable you to record and mix at up to 24-bit/ 192kHz.
• Quick start tool to get up and running easier than ever.
• Includes Pro Tools | First Focusrite Creative Pack, Ableton Live Lite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, 3-month Splice subscription, and your choice of one free XLN Addictive Keys virtual instrument, all available via download upon purchase and registration
• LIMITED TIME OFFER: FREE Klevgrand DAW Cassette upon registration and download.

User questions & answers

Question:	Is the headphone jack on this for monitoring your inputs, or does your PC audio come through it aswell
Answer:	Hi, You can monitor your inputs and listen to playback from your computer simultaneously, which allows you to create overdubs with next to zero latency. You can either choose to monitor the inputs using the Direct Monitor switch, or you can use the Input Monitor feature in your DAW. If using the Direct Monitor feature the input signal will be passed directly to the line and headphone outputs, whereas if you use the Input Monitor feature in your DAW, you will be hearing the audio you're recording back from your DAW. In either case, you can still hear any other audio playing back from your DAW at the same time as recording. Best regards, Laurence Clarke // Focusrite Technical Support
Question:	What type of usb cable does this come with? is it a type-c to type-c or a type-c to type-a
Answer:	Hi, This comes with a type-c to type-a cable. If you have type-c ports, you will need to purchase a type-c to type-c USB cable separately. Best regards, Laurence Clarke // Focusrite Technical Support
Question:	Does the XLR input only record audio to the left side
Answer:	Hi, When recording a single microphone, you should ensure that you create a mono audio track in your DAW instead of a stereo audio track. When you record onto a mono audio track, the output from that track will be heard on both sides of your headphones or speakers (ensuring the output is set to stereo), however, if you record onto a stereo track, the audio will just be recorded onto the left side of a stereo file and you will ony hear it on the left of your headphones/speakers. This is explained in more detail here: https://support.focusrite.com/hc/en-gb/articles/206849779?flash_digest=62885ef974b4eb116f3b3ea2c9b9c38ddb871473 Best regards, Laurence Clarke // Focusrite Technical Support
Question:	can this power 250 ohm headphones
Answer:	I have a 650 , 300 ohm and it's enough to play it at okay volume but not enough to power it completed I'm looking at an Amp to pair this with

Product features

The perfect audio interface for a singer-songwriter

You’ve found the simplest USB audio interface we make. If you want to start creating studio quality recordings with your guitar, the 3rd Generation Scarlett Solo provides an easy way in.

Product description

• High-quality USB/audio interface connects your turntable, cassette player etc. with your computer for recording and playback
• Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection
• Phono input switchable to line input source
• Stereo output allows easy connection and playback of computer audio files over your home sound system

User questions & answers

Question:	Can I record direct from a magnetic cartridge to my computer
Answer:	THE SOFTWARE IS NEEDED
Question:	I want to connect an old Sony turntable with RCA output to a new Onkyo receiver. will this unit help? the av receiver has RCA inputs and/or HDMI
Answer:	I can’t answer this for the Shure MVi product, but I use the MXL Microphone product to convert line level xlr from my board to usb for broadcast.
Question:	Does the UFO202 have RIAA compensation in the pre amps circuitry for the turntable
Answer:	Yes，it can work with guitar input, and also can work with GarageBand.
Question:	I tried to use this as a pre-amp by plugging the USB into a 1.0A 5.0V usb wall charger, which does not work. Is there a way to do this properly
Answer:	That should work just fine.If this was helpful, please consider purchasing from us. We can help with support after the sale as well. We have it in stock and ready to ship. - Pixel Pro Audio

Product features

U-PHONO UFO202

Audiophile USB/Audio Interface with Built-in Phono Preamp for Digitalizing Your Tapes and Vinyl Records

The amazing UFO202 is the simple and affordable way to get your vinyl records and tapes into the digital realm. The U-PHONO UFO202 is supremely-easy to use and comes with a bevy of professional software that, not only converts your favorite recordings into a computer-based music library – but removes the scratches and pops so common to vinyl media. State-of-the-art, switchable Line/Phono preamps and digital converters ensure the utmost in sound quality, making the U-PHONO UFO202 Audio Interface a must-have for every audiophile.

Versatility of a Powerful Miniature Interface

The UFO202 boasts an impressive set of features for its micro size. Use the UFO202’s RCA Inputs and Outputs to connect your computer and your mixing console, tape deck, keyboard, sound modules and active monitors, to just name a few of the myriad options. Additionally, when you connect the UFO202’s outputs to your mixer’s input channels, you gain access to EQ, Aux Sends and much more – allowing you to build extremely-versatile monitor mixes for your recording sessions.

48 kHz Precision

You take your tracks seriously, and the UFO202 respects them too, providing 48 kHz resolution, for the amazingly-detailed and pristine recording quality your music deserves.

Getting Connected

The UFO202 features a stereo input for connecting turntables or any line-level device (such as a mixer or tape deck), plus a stereo analog output for connecting active speakers or studio monitors. You can also connect electronic instruments with RCA connections, such as keyboards, sound modules, and drum machines directly to your computer for recording. The Volume control allows you to set the level of the stereo headphones.

Free Would Be Nice!

Because you’ll want to take full advantage of the UM2’s recording and podcasting potential, we’ve included all the software you’ll need for audio recording, editing and even podcasting – all free of charge and downloadable from behringer.com. You’ll be ready to go live on your PC or Mac right out of the box! We’ve also provided a free download of more than 150 virtual instruments and FX plug ins – turning your computer into a powerful home-based or mobile recording studio from input to output.

Compose. Record. Mix. Share.

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Value

Now, for just a fraction of the price you’d pay for a USB turntable, you can have state-of-the-art digital conversion, world-class recording and editing software – plus ultra-easy connectivity for your PC or Mac computer and virtually any piece of audio gear, including phono turntables and tape decks. Bridging the gap between your music and the rest of the world – the U-PHONO UFO202. Visit your local BEHRINGER dealer, or shop online to pick up your UFO202 – and bring those beloved tracks back to life today.

Product description

Clarett USB lays down the challenge to interfaces twice the price. The Clarett USB range features specially designed high performance, low-noise (-128dB EIN) mic pres with a low distortion, ultra-linear design that guarantees a clean, open and transparent sound, giving accurate representation of the original performance. Boasting 119dB dynamic range, Clarett can now be experienced with any Mac or PC supporting USB 2.0 and above. Decades of analog circuit design experience applied around 24-bit/192kHz A-D and D-A conversion, delivers a superior signal path.



Clarett 2Pre USB is a 10-in, 4-out audio interface. The two mic/line/instrument inputs can record everything from condenser mics to super-hot pickups with no unwanted distortion - Gain Halo meters make it easy for you to set the input level. The ADAT input supports an additional eight channels in combination with multi-channel mic preamps like Clarett OctoPre. Outs include two monitor outputs with anti-thump technology, a headphone output with volume control, and two-line outputs. MIDI I/O is also included. The two Air-enabled mic preamps can reproduce the input impedance, clarity and frequency response curve of Focusrite's original ISA mic preamp. Clarett 2Pre USB connects to Mac or PC using the included standard USB and USB Type-C cables. Record with super-low latency through amp simulators and effects plug-ins. Configure your routing and monitor mixes from Mac, PC, iPad, iPhone or iPod Touch with user-friendly control software Focusrite Control. Additional included software is from XLN Audio, Focusrite, Softube, Ableton and Loopmasters. Interested in what headphones are compatible with Clarett? Search 'Headphones' on the Focusrite help centre for more information.

• Two Air-enabled ultra-low noise Clarett mic pres / inst. inputs; ultra-low distortion and up to 119dB dynamic range. Four balanced outputs including a dedicated stereo pair, headphone output with dedicated gain control; MIDI I/O, ADAT input (expand up to 8- additional inputs and outputs)
• Precision 24-bit/192Khz A-D and D-A conversion for the ideal signal path; high-headroom instrument inputs for recording super-hot pickups with no unwanted distortion
• Included standard USB and USB Type-C cables connect to PC or Mac
• Includes Ableton Live Lite, Brainworx bx_console Focusrite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, Focusrite Control, 2GB of Loopmasters samples, Choice of one free XLN Addictive Keys virtual instrument, all available via download upon purchase and registration
• LIMITED TIME OFFER: FREE Klevgrand DAW Cassette upon registration and download.

User questions & answers

Question:	Can i route the Outputs to be mono? or are they stereo ? can i have one guitar and one vocal? or will they be linked together as a stereo pair
Answer:	Im not sure
Question:	has anyone confirmed the low latency on the usb version? i'm a pc user, & thunderbolt isn't compatible
Answer:	You can only hear it if it’s totally quiet and you have your ear to the speaker. If you play anything or stand 3 feet away you won’t even hear it. I leave mine on all the time, it’s really not an issue.
Question:	I will not be using the mic inputs, only using it for playback in protools. Will I see any benefits over the scarlet? quality? latency? etc
Answer:	The adams are much, much more expensive and I really have never heard them so I can't speak for them. The Kalis are amazing, in my opinion they are the best in their price range and even compete with others in much higher prices... can they compete with the Adams? I don't know...
Question:	My motherboard has a usb 3.1 expansion card, but it is not a type c connection. will i still get the same low-latency connection with this interface
Answer:	individually

Product features

Class leading conversion in a small, expandable interface.

2Pre is our smallest Clarett. Combining two mic/line/instrument combi inputs with ADAT expandability and four line outs, Clarett 2Pre gives you everything you need to travel light and adapt your setup to any space. Just plug in and record or adapt your channel count for bigger recording sessions.

Product description

Bluetooth In. Balanced Audio Out. The MV-BT aptX Bluetooth adaptor turns any professional speaker into a Bluetooth speaker!

The MV-BT is a Bluetooth receiver with balanced outputs for use with any professional audio system. Users can pair any Bluetooth-capable playback device, including smartphones and laptops, with the MV-BT, and connect directly to their speakers, to a mixer, or to an interface. Using the aptX codec, the MV-BT is capable of receiving CD-quality audio over Bluetooth. The MV-BT has independent volume control, eliminating the need to control volume from a playback device.

XLR & TRS Stereo Outputs

Use the XLR & TRS Outputs to send signals to a pair of speakers, a mixer, or an interface. Because both the XLR and TRS provide balanced connection, you needn’t worry about adding more noise to the signal. Either the XLR or TRS outputs may be used according to your preference.

• TRS STEREO & XLR STEREO- The MV-BT provides stereo XLR & TRS for easy connection with any professional system. Balanced connectors enable you to use long runs of cable without risking more noise entering the signal.
• INDEPENDENT VOLUME CONTROL- No need to control volume from your playback device. Device can play at full resolution, while still giving you the opportunity to fine-tune the output volume according to your needs.
• aptX BLUETOOTH ADAPTOR- With the Bluetooth transmitter aptX codec, compatible devices can send CD-Quality audio over Bluetooth to the MV-BT.
• LED VOLUME LEVEL INDICATOR- The LED array gives instantaneous visual feedback for the output level, a welcome aesthetic addition to any professional audio setup. Weighted volume control knob adds a precise feel and is detented so the volume stays put.
• XLR STERO TO 3.5mm- Compatible with older devices via the 3.5mm input on the side of the unit.

User questions & answers

Question:	The hissing still present? It’s the power unit causing
Answer:	If your new receiver has phono in RCA jacks, you do not need a preamp. If your new receiver is so modern that it does NOT have a phono input, then yes, this Berringer unit will be exactly what you need.
Question:	Can I use this with bluetooth headphones
Answer:	Page 7, para. 5.1 of the UFO202 manual states: To transfer music from a record player, a special preamplification process must take place in order to boost the low signal level coming from the player. To do this, simply move the LINE/PHONO switch on the UF0202 to the right (PHONO selected). " It's possible that the "special preamplification process" includes the RIAA compensation. The RIAA equalization is essentially a sloping equalization curve of decreasing gain with decreasing frequency; this prevents the low frequencies from tearing-up the record grooves. The RIAA compensation reverses the equalization slope, boosting the low frequencies. Without RIAA compensation recordings would sound very treble biased; no low end. Since others, who appear to have used this unit, report that the recordings sound normal, RIAA is most probably included. In any case I generally contact the company when in doubt. NOTE: I plan on purchasing this unit.
Question:	Can I use both sets of outputs simultaneously in order to drive two sets of speakers from the same source
Answer:	To use the Behringer UFO202 simply as a preamplifier, you are proceeding correctly.The USB wall charger powers the Behringer UFO202.The low-level analog audio signal (such as from a magnetic phono cartridge) should be connected to the RCA input jacks on the Behringer UFO202.The preamplifier switch must be in the "phono" position.The preamplified analog audio signal will appear at the RCA output jacks, which need to be connected to the line-level input of an analog audio amplifier. Of course, speakers need to be connected to the audio amplifier as well.This setup should provide preamplification from your low-level analog audio signal to the line-level input of your analog audio amplifier. Note that the separate amplifier is required as the Behringer UFO202 cannot directly drive speakers, although it may drive earphones or headphones.

Product features

Bluetooth In. Balanced Audio Out. Turn any professional speaker into a Bluetooth speaker!

Ditch the Adapters.

Kali Audio’s MV-BT lets you use your Bluetooth devices with professional speakers, mixers, controllers, and interfaces. Just pair your device by pressing the Kali logo on the front, and use your preferred balanced connector to connect to your system.

Where does “MV” come from?

The official name of this product line is “Project Mountain View.” Kali names all of our product lines after towns in California. Mountain View is the town where several major tech companies, including Google, are headquartered. As Silicon Valley continues to develop phones and other devices without analog audio outputs, we thought it was a fitting name for a wireless audio device.

XLR & TRS Outputs

Use the XLR Outputs to send signal to a pair of speakers, a mixer, or an interface. Because XLR is a balanced connection, you needn’t worry about adding more noise to the signal.

Use the TRS Outputs to send signal to a pair of speakers, a mixer, or an interface. Because TRS is a balanced connection, you needn’t worry about adding more noise to the signal. Either the XLR or TRS outputs may be used according to your preference.

High Res aptX Codecs

AAC for iOS devices. This codec allows compatible devices to stream CD-quality audio over Bluetooth with minimal latency.

Balanced TRS & XLR Outputs

Use the XLR or TRS Outputs to send signal to a pair of speakers, a mixer, or an interface. Because XLR and TRS are balanced connections, you needn’t worry about adding more noise to the signal.

3.5 mm

Bluetooth input with a 3.5mm aux input jack for older devices, in situations where wireless interference makes Bluetooth unusable, or if you prefer using a physical connection.

Independent Volume Control

Device can play at full resolution, while still giving you the opportunity to fine-tune the output volume according to your needs.

Pairing Button

• Press and hold the Kali logo for 2 seconds to enable pairing mode.
• The LED around the logo will flash quickly to indicate that you are in pairing mode.
• With pairing mode enabled, you should be able to find the MV-BT on your device (labeled “Kali MV-BT”) and pair to it.

LED Display

• The LED array indicates the current volume and looks cool doing it.
• More blue LEDs will illuminate from left to right as volume is turned up.

Weighted Knob

• Enjoy precise control over the volume level at your fingertips.
• This volume controller does not control the volume from your device, so you can pass the highest possible quality audio at all times.

Balanced Outputs

• XLR & TRS Outputs
• Connect to speakers, mixers, controllers, or interfaces with whatever cables you already use.
• Because each output option is a balanced connection, you needn’t worry about adding more noise to the signal.
• Either the XLR or TRS outputs may be used according to your preference.

Product description

Aproca Hard Storage Travel Case Fit for Hercules DJControl Starlight / Akai Professional LPK25 | 25 Key MIDI Keyboard Controller

• Eco-friendly Material: Made of High-density EVA and 1680D Material, premium Hard EVA to provide durability and a long-lasting performance.
• Perfect Fit: Specially designed for Akai Professional LPK25 Portable USB MIDI Keyboard Controller.
• Convenient Design: Comfortable handle for easy portability,Comes with specially mesh pocket for other accessories,Smooth but strong double zipper are easy for opening and closing, giving you a better using experience.
• Great Protection: Stylish and Durable,prevents any damages or scratches caused by accidentally bumping,dropping, secures the device in good condition on travelling or outdoors.
• For sale is case only(device and accessories are not included).

User questions & answers

Question:

What are the internal dimensions

Answer:

I'm not sure what a magnetic cartridge is, but if you can record from a microphone, turntable or cassette deck, you should be able to record from a magnetic cartridge. If I remember correctly, many turntables used magnetic cartridges. The inputs on the UFO device require 1/4" (6.3mm) male stereo plugs - the kind that were common on older stereo equipment (1970's, 1980's), etc. I'm sure that you can find in many, many places (including Radio Shack) adapter plugs to convert from other sizes to 1/4" if necessary. Search for the 1/4" stereo plug on Amazon to see what I mean.

Product description

ION Audio's Tape 2 PC is a revolutionary tape deck that plays and records tapes, with a twist: It turns your music into MP3s!

Tape 2 PC has a convenient USB connection so you can plug into your Mac or PC.

Tech Specs

• Type: Stereo double cassette deck
• Track System: 4-track 2-channel
• Tape speed: 4.8 cm/sec
• Frequency Response
  • (-20dB recording)
    
    
    • Chrome tape 40-15000Hz (±3dB)
    • Normal tape 40-14000Hz (±3dB)
  • (0dB recording)
    
    
    • Chrome tape 40-8000Hz (±3dB)
    • Normal tape 40-8000Hz (±3dB)
• S/N ratio: 58dB
• Wow and flutter: <0.2% (DIN45500)
• Crosstalk: 40dB (1kHz)
• Harmonic distortion: Less than 1% (at 1 kHz, OVU 3rd H.D. normal tape)
• Channel separation: 40dB (1kHz)
• Head
  
  
  • Deck A: Playback
  • Deck B: Recording/playback, 2-gap ferrite head for erasure
• Motor: DC servo motor (x 2)
• Fast forward/Rewind time: ~100 sec w. C-60 cassette
• Input terminals
  
  
  • Line In (x 2)
    • Minch input level: 600mV (0dB)
    • Input impedance: 50kΩ
• Output terminals
  
  
  • Line Out (x 2)
    • Output level: 600mV (0dB)
    • Output impedance: 5kΩ
• USB Audio Interface: USB 1.1 compatible, 16 bit,44.1kHz (CD quality) or 48kHz sample rate
• Power requirement: AC220V-230V ~ 60Hz
  
  
  • For U.K. 240V ~ 60Hz
  • For U.S.A. & Canada 127V ~ 60Hz
• Power Consumption: 11.9W Maximum
• Dimensions (width x height x depth): 16.5” x 5.3” x 8.5”
• Weight: 8.5lbs
• Accessories:
  • RCA cable
  • USB cable
  • Software CD
  • Quickstart Manual
  • Safety and Warranty Information.

Reclaim those old cassettes--both store-bought and recorded from the radio or live performances--and save them to your PC with the Ion Tape 2 PC USB dual cassette deck, which is compatible with both Windows- and Mac-based computers. Just plug the Tape 2 PC into your computer using the provided USB cable, install the software and start converting your music.

The Ion Tape 2 PC USB dual cassette deck (see larger schematic image of front panel controls)

It comes with everything you need to turn your music into digital MP3 files. ION's exclusive software suite makes transfer and editing your music easy. EZ Tape Converter provides an easy way to transfer your music and import it into your iTunes music library. Windows users can download a version of EZ Tape Converter with Gracenote MusicID technology for free. It automatically adds album, artist, and song information for you.

When you're finished archiving your cassettes to your computer, Tape 2 PC can connect to your stereo system using standard RCA cables for convenient cassette listening in your living room, garage, or wherever your stereo system resides. Other features include recording level adjustment, dubbing (from deck A to deck B) with high-speed dubbing capabilities, and gain adjustment.

Key Features

• Transfer music on your tapes to MP3
• Dual-dubbing cassette deck
• Plug and Play USB connection--no drivers needed
• Works with Metal and CrO2 tapes
• EZ Tape Converter (PC) and EZ Audio Converter (Mac) software for hassle-free recording

What's in the Box

Tape 2 PC, USB cable, RCA stereo audio cable, software CD, quick start manual

Computer Requirements

• PC running Windows XP (32-bit or 64-bit) or Vista (32-bit or 64-bit)
• Mac running OS X 10.4 or higher
• One available USB 1.1 port or higher

With EZ Tape Converter, you can quickly start recording LP tracks...

...and then tag individual tracks with artist, album, and song title tags.

• Quickly transfers music from tapes to digital music format. System requirements Microsoft - Windows XP, Windows Vista (32/64-bit, Windows 7 - 32/64-bit, Pentium 4 CPU or comparable or better
• Quickly transfer music on your tapes to MP3 format on your computer
• Dual dubbing cassette deck
• Plug and play USB audio interface, no drivers needed
• Metal and CrO2 tape selector
• PC and Mac compatible

User questions & answers

Question:	Is it compatible with Windows
Answer:	Yes
Question:	Is it compatible with macos high sierra version
Answer:	ION support here! The Tape 2 PC is compatible with High Sierra. If you have any other questions, please feel free to email me directly at [email protected].
Question:	what are the dimensions
Answer:	Per the manual: the dimensions are 420mm x 135mm x 215mm (15.55 x 5.31 x 8.46) (W x H X D), weighs 8.5lbs.
Question:	Is it new with manufactures warranty
Answer:	I bought mine about 2 years ago but yes it was brand new with a warranty. I still use mine and it works great. Never needed the warranty.

Product features

Save Your Tapes!

Do you have one of a kind tapes that have been played over and over, and are beginning to show signs of severe wear? Save that recording forever with Tape 2 PC!

Easy To Use

Just plug Tape 2 PC into your computer using the provided USB cable, install the software and start converting your music. Easily transfer your music to your iPod or other MP3* player, or record it to CD.

Simple Connections

When you're finished archiving your cassettes to your computer, Tape 2 PC can connect to your stereo system using standard RCA cables for convenient cassette listening.

Features

Transfers music from your tapes to your computer.

Included EZ Vinyl/Tape Converter create convenient MP3s* of all your cassettes.

Dual-dubbing cassette decks for tape-to-tape conversion.

Works with Metal and Crome cassette tapes.

This product is class compliant; it does not require drivers.