A battery holder for 4 AA batteries is a simple device used to hold and connect four AA-sized batteries together. Here's what you should know about it:
Purpose: The primary purpose of a battery holder for 4 AA batteries is to provide a convenient and secure way to power electronic devices or projects that require AA batteries. It holds the batteries in place and ensures proper electrical connections.
Design: Battery holders are typically made of plastic or other insulating materials. They are designed to hold four AA batteries in a specific arrangement, usually in series, to achieve the desired voltage.
Configuration: In most cases, the batteries are arranged in series within the holder. This means that the positive terminal of one battery connects to the negative terminal of the next battery, creating a cumulative voltage. For AA batteries with a nominal voltage of 1.5 volts each, a 4-AA battery holder would provide a total voltage of 6 volts (1.5V x 4).
Terminals: A battery holder has metal terminals or contacts that make electrical contact with the positive and negative ends of each battery. These terminals usually have wire leads attached, allowing you to connect the holder to your electronic device or circuit.
Wiring: Battery holders may come with wire leads pre-soldered to the terminals or with connectors that allow you to easily connect and disconnect the holder from your device or project. The wires or connectors are typically color-coded, with red indicating the positive (+) side and black indicating the negative (-) side.
Uses: Battery holders for 4 AA batteries are commonly used in various electronic devices, toys, remote controls, flashlights, and DIY projects. They provide a reliable and replaceable power source for these applications.
Advantages: Using a battery holder makes it easy to replace depleted batteries without the need for soldering or other complex wiring. It also helps prevent damage to the batteries and provides a secure housing.
Compatibility: It's essential to ensure that the battery holder is compatible with the type of AA batteries you intend to use (e.g., alkaline, NiMH, or lithium). Different battery chemistries may have different dimensions, and some holders are designed for specific types.
DIY Projects: Battery holders are popular in hobbyist and DIY electronics projects, where they simplify the power supply aspect of building circuits and devices.They are readily available in various sizes and configurations to accommodate different battery types and quantities.
When using a battery holder for 4 AA batteries, make sure to observe proper polarity (positive and negative orientation) and use batteries of the same type and charge level for best results. Battery holders are convenient accessories that can make it easier to power your electronic gadgets and projects reliably.
Below you can find our editor's choice of the best battery holder for 4 aa on the market
: LAMPVPATH
Specification:
<1>Type of AA Battery Holder: 4 aa battery holder, 4x 1.5V aa battery holder with wires
<2>Voltage Output of 4AA Battery Holder: 6V, 4 x 1.5v aa batteries = 6Volt battery holder
<3>Dimensions of 4 Cell AA Battery Holder: (L*W*H)/2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm(L*W*H)
<4>Leads of AA Battery Holder: all the 4 aa battery holder with leads, tinned wire end
<5>Wires Length of 6V Battery Holder: 5.9"/15cm
<6>Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm
<7>Wires Color of Battery Holders: red and black, the red cable contact the positive side of the aa battery holder with wires, and the black cable contact the negative side of the aa battery pack with wires.
<8>Color of 4 AA Battery Box: black
<9>Material of 4 AA Battery Holder Case: plastic ABS
<10>Weight of One 4 AA Battery Holder with Leads: 0.459oz/13g
<11>If 4AA Battery Holder has ON/OFF Switch: no
<12>If 4xAA Battery Holder has Cover: no
Package Contents:
2x 4 aa battery holder with leads
| Product Dimensions | 2.25 x 2.46 x 0.62 inches |
|---|
| Product Dimensions | 2.25 x 2.46 x 0.62 inches | " }, "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.6", "reviewCount": "250" }, "offers": { "@type": "Offer", "url": "https://www.amazon.com/dp/B07T7MTRZX?tag=bfyall-20&linkCode=osi&th=1&psc=1", "priceCurrency": "USD", "price": "5.98", "priceValidUntil": "2023-07-01", "itemCondition": "http://schema.org/NewCondition", "availability": "https://schema.org/InStock", "seller": { "@type": "Organization", "name": ": LAMPVPATH
|---|
| Product Dimensions | 2.25 x 2.46 x 0.62 inches | " } } }
|---|
| Question: | what is the size of a single case |
| Answer: | 2.75" X 2" X .75". |
Great for Arduino boards micro-controllers, led projects, toys, also can replace broken battery holders for many electronic devices.
Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
2 layers, each layer can load 2 AA batteries, totally can load 4 AA batteries.
Note 1:
Please do not use this battery pack for high currect output project.
Note 2:
Battery is not included.
Note 3:
Please do not use this battery box to charge batteries.
Package Contents:
2x 4 AA Battery Holder; 2x 9V Snap Connector; Besmelody 18-month warranty and friendly customer service.
Specification:
--8 Types of AA and AAA Battery Holders: 1 aa battery holder, 2 aa battery holder, 3 aa battery holder, 4 aa battery holder, 1 aaa battery holder, 2 aaa battery holder, 3 aaa battery holder, 4 aaa battery holder
--AA Holder Dimensions(L*W*H): 1 aa battery holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm; 2 aa battery holder: 2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm; 3 aa battery holder: 2.287" x 1.906" x 0.567"/5.81cm x 4.84cm x 1.44cm; 4 aa battery holder: 2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm
--AAA Holder Dimensions(L*W*H): 1 aaa battery holder: 2.047" x 0.519" x 0.476"/5.20cm x 1.32cm x 1.21cm; 2 aaa battery holder: 2.082" x 0.948" x 0.516"/5.29cm x 2.41cm x 1.31cm; 3 aaa battery holder: 2.039" x 1.276" x 0.575"/5.18cm x 3.62cm x 1.30cm; 4 aaa battery holder: 2.091" x 1.976" x 0.484"/5.31cm x 5.02cm x 1.23cm
--Battery Holder Leads: all aa and aaa battery case holder with leads, they are tinned wire end
--Wires Length: 5.9"/15cm
--Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm
--Cable Color: red and black
--Material: plastic ABS
--AA Holder Weight: single aa battery holder: 0.141oz/4g; 2 aa battery holder: 0.247oz/7g; 3 cell aa battery holder: 0.388oz/11g; 4 cell aa battery holder: 0.459oz/13g
--AAA Holder Weight: single aaa battery holder: 0.106oz/3g; 2 aaa battery holder: 0.176oz/5g; 3 aaa battery holder: 0.247oz/7g; 4 cell aaa battery holder: 0.317oz/9g
--No ON/OFF Switch and Cover on the Battery Holder!
Package Contents:
1x 1 aa battery holder
1x 2 aa battery holder
1x 3 aa battery holder
1x 4 aa battery holder
1x 1 aaa battery holder
1x 2 aaa battery holder
1x 3 aaa battery holder
1x 4 aaa battery holder
Specification
Material: plastic, metal.
Colour: Black.
Cable length: 10cm / 3.94Inch.
Dimensions: 108.62 x25.85 x17.26mm / 4.28x1.02x0.68 inches.
Quantity: 2PCS battery holder, 2 PCS snap connectors.
Feature
Made of high-quality materials, good conductivity, sturdiness and durability, and long service life.
Can accommodate 4 x 1.5V AA batteries, using alkaline batteries can output 6V, and using rechargeable AA batteries can output 4.8V.
Easy to solder or connect.
: LAMPVPATH
Specification:
<1>Battery Type: 4 aa battery holder switch, 4x 1.5V aa battery holder with cover
<2>Voltage Output of One 4 AA Battery Holder: 6V, 4x 1.5v aa battery= 6 volt aa battery holder
<3>AA Battery Holder Switch Function: ON/OFF switch on 4 aa battery holder, it's the 4 aa battery holder with on off switch
<4>AA Battery Holder Wire Leads: 4 aa battery holder with leads, tinned wire end
<5>4 AA Battery Holder Wire Length: 5.7"/14.5cm
<6>Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm
<7>Battery Holder Cable Color: red and black
<8>Dimensions of 4 AA Battery Holder: (L*W*H)/2.677" x 2.535" x 0.760"/6.8cm x 6.44cm x 1.93cm
<9>Weight of 4 AA Battery Holder with Switch: 1.27oz/36g (one battery holder with one screw weight)
<10>Color of 6V Battery Holder With Switch: black
<11>Material of 4 AA Battery Holder with Leads and Switch: Plastic ABS
<12>Screw Size: 0.303" x 0.0787"/7.7mm x 2.0mm(Length*Diameter)
Package Contents:
2x 4 aa battery holder with switch
2x screws for aa battery holder 4
| Manufacturer | LAMPVPATH |
|---|
| Question: | What gauge wire are the leads? Thanks |
| Answer: | don't know about gauge but the wire with casing is around 1/16" thick/wide and the bare wire is around 1/32" thick/wide. hope that helps |
| Question: | Do they have a timer |
| Answer: | No timer ....just an on/off switch. |
| Question: | How many packs do i get |
| Answer: | 3 individual packs |
| Question: | Is this in series or parallel |
| Answer: | this is in series. |
| Manufacturer | LAMPVPATH | " }, "aggregateRating": { "@type": "AggregateRating", "ratingValue": "4.5", "reviewCount": "250" }, "offers": { "@type": "Offer", "url": "https://www.amazon.com/dp/B07L9M6VZK?tag=bfyall-20&linkCode=osi&th=1&psc=1", "priceCurrency": "USD", "price": "6.99", "priceValidUntil": "2023-07-01", "itemCondition": "http://schema.org/NewCondition", "availability": "https://schema.org/InStock", "seller": { "@type": "Organization", "name": ": LAMPVPATH
|---|
| Manufacturer | LAMPVPATH | " } } }
|---|
| Question: | The ones I got sent are flat do you have the 2x2 as pictured |
| Answer: | Yes, We had a mixup at Amazon with 2 of our products and the wrong ones were shipped out. If you contact me through the order system I can get you taken care of. |
QTEATAK has established for 14 years.
Specification:
Package Include:
4 x 1.5V AA battery holder with ON/OFF switch. Enclosed holders come with screw to secure.
Can be used as battery power supply for led light projects, wall clocks, toys and so on. Also used to replace damaged battery holders.
Easy to install, the battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to damage other parts.
Come with 5PCS, which can save you much and makes you always have a backup.
We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best.
QTEATAK has established for 14 years.
We manufacture with yearly turnouts of 100 million.
As a responsible company, we put production quality in the priority list and commit to perfect every detail.
We choose materials of the best quality and obey technical standards including ISO9001:2008/CE/SGS/Rohs strictly.
We try to make that each product for you is of the best.
Specification
Product model: AA Battery holder
Material: PP
Metal material: stainless steel
Exposed line length: 120mm
Package Include
1× AA Battery Holder-----2 Pcs
2× AA Battery Holder-----2 Pcs
3× AA Battery Holder-----2 Pcs
4× AA Battery Holder-----2 Pcs
| Question: | How many of each |
| Answer: | 2 of each |
| Question: | how many amps can they take for a sustained duration |
| Answer: | I don't know if this question can be answered well. An AA battery of 2200Mah ideally can only deliver 3A to a 0.5 ohm load for a short time before they start to drop voltage. These holders have 24 gauge wire attached to the terminals. The wire is rated at 3.5Amps max. So, your maximum rating for any application is likely between 2 and 3A given that heat will damage the connections. |
| Question: | What is the size of holder |
| Answer: | the 4- battery holder is approx 2.5 inches by 2.25 inches. Not much bigger that the batteries. |
| Question: | What gauge wires are the leads |
| Answer: | I'm guessing 28ga. Looks like same size as wires on devices I have that also use 9 volt batteries (multimeters, etc) |
High quality Battery Holder 4 X AA Cells With Standard Snap
Package Quantity: Battery Holder x 4pcs, T Type Wired Connector x 4pcs
T Type Wired Connector Length: 15cm/5.9''
| Question: | Are these holders wired in series or parallel |
| Answer: | Series: 4 x 1.5 = 6 volts. |
