13 best acoustic audio speakers
Acoustic audio speakers are a fundamental part of audio systems, particularly in the context of home audio and electronics. These speakers are designed to reproduce sound with high fidelity, clarity, and accuracy, providing an immersive listening experience. Here's what you need to know about acoustic audio speakers in relation to surround sound systems, home audio, and electronics:
Surround Sound Systems: Acoustic audio speakers are often used as components within surround sound systems. These systems typically include multiple speakers placed strategically around a room to create a three-dimensional audio experience. The key components of a surround sound system include:
Front Speakers: These speakers are responsible for delivering the primary audio, such as dialogue and music, and are usually placed in the front of the room.
Center Channel Speaker: This speaker is crucial for clear dialogue in movies and TV shows. It's typically placed below or above the display.
Rear/Surround Speakers: These speakers create the surround sound effect, immersing the listener in the audio. They are placed behind or to the sides of the listening area.
Subwoofer: The subwoofer handles low-frequency sounds, providing deep bass for a more cinematic experience.
Home Audio: Acoustic audio speakers are also commonly used in home audio setups beyond just surround sound systems. People use them for listening to music, podcasts, and more. High-quality home audio speakers are designed to reproduce sound accurately across the entire audio spectrum, from the lowest bass notes to the highest treble tones.
Electronics: Acoustic audio speakers can be integrated into various electronic devices, including TVs, stereos, soundbars, and home theater receivers.These integrated speakers are essential for enjoying audio and video content.
Types of Speakers: There are various types of acoustic audio speakers, each designed for specific purposes:
Bookshelf Speakers: Compact speakers designed to fit on shelves or stands, ideal for small to medium-sized rooms.
Floorstanding Speakers: Larger speakers that stand on the floor, providing powerful sound for larger rooms or dedicated home theaters.
Soundbars: Slim, all-in-one speaker systems designed to enhance TV audio. They often include multiple drivers to create a virtual surround sound effect.
In-Wall and In-Ceiling Speakers: These speakers are installed flush with walls or ceilings, offering a discreet and space-saving audio solution.
In summary, acoustic audio speakers are essential components of surround sound systems, home audio setups, and various electronic devices. They come in different types and configurations to suit a wide range of applications, delivering high-quality audio for an immersive listening experience.
Below you can find our editor's choice of the best acoustic audio speakers on the marketProduct description
These are the perfect speakers for any occasion or application because they are water-resistant and can withstand all weather conditions. They were designed with durability in mind, so there's no need to worry about rust or wear-and-tear. Use them on your deck or patio, by the pool, or in your garage. They also make great additions to any surround sound home theater, will fit onto any bookshelf, can be used with any PA system and are great to use In bathrooms and kitchens. Each speaker can handle 250 watts of power (125W RMS), and has a two-way design and functionality. Included are mounting brackets, which allows for hassle-free installation in any location.
- OUTDOOR MOUNTABLE WIRED SPEAKERS - Traditional passive speaker design, simply drive power from your amplifier or receiver. Full Range sound coverage with 2-way tweeter and woofer configuration
- WEATHERPROOF AND DURABLE - Black ABS sealed cabinets with spring loaded raw wire connectors and mounting brackets are weatherproof against rain, snow, sun, ice and more. Big sound from a compact speaker size of (H x W X D) 6" x 4.25" x 4" each
- HIGH QUALITY - 3" Poly Mica woofers with butyl rubber surrounds, .5" PEI dome tweeters, frequency response of 100Hz-20 kHz with 89dB at 8ohm
- SYSTEM REQUIREMENTS - Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 20 and no more than 250 watts per channel, CL3 or raw speaker wire to connect your amp to the speakers
- WHAT'S IN THE BOX - 2 Acoustic Audio by Goldwood AA351B speakers, mounting brackets with hardware, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations, patios, decks, pool and spa settings
- Refer to the User Manual under Technical Specification.
User questions & answers
Question: | Will these speakers work if i run an rca jack out of my home theater projector to an amplifier then to the speakers with 16 gauge wire |
Answer: | /Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time --:- Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Dear Customer : Thanks for your question! … see more Dear Customer : Thanks for your question! First of all, cut the RJ45 cable connector, and then rip the PVC jacket of the cable to expose the four pairs of wires wrapped in aluminum foil. Afterwards, remove the aluminum foil, separate the inner wires, arrange them in the order of TIA/EIA568B, and cut them neatly with crimping pliers. After cutting, insert it into the crystal head, and then press it with crimping pliers. You can refer to the Video. see less Dear Customer : Thanks for your question! First of all, cut the RJ45 cable connector, and then rip the PVC jacket of the cable to expose the four pairs of wires wrapped in aluminum foil. Afterwards, remove the aluminum foil, separate the inner wires, arrange them in the order of TIA/EIA568B, and cut them neatly with crimping pliers. After cutting, insert it into the crystal head, and then press it with crimping pliers. You can refer to the Video. |
Question: | Great for surround for my yamaha? I already have subs but a lirtle bass wobt hurt these will it |
Answer: | /Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time --:- Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Hahaha! Sooo easy. Oxygen-free copper has very low melting point, and oxygen-free copper can be melted after burning. I have tried to burn QIFGUO’s copper wire and upload the video here. Just check it out. … see more Hahaha! Sooo easy. Oxygen-free copper has very low melting point, and oxygen-free copper can be melted after burning. I have tried to burn QIFGUO’s copper wire and upload the video here. Just check it out. QIFGUO see less Hahaha! Sooo easy. Oxygen-free copper has very low melting point, and oxygen-free copper can be melted after burning. I have tried to burn QIFGUO’s copper wire and upload the video here. Just check it out. QIFGUO |
Question: | Anyone using these as atmos speakers in a surround sound setting? if so how do they perform for you? thanks |
Answer: | Dear buyer Thank you very much for your recognition of our Haslo Tech Brand. We upgraded our brand in 2021, and now the Haslo Tech is renamed QIFGUO. Seeing some customers remember our old brand name, our team is Super happy and excited! In the new year, we have upgraded the product quality and brand name, please search the brand QIFGUO to find our product. We will work harder to control product quality, optimize our customer service team, ahead to the Best price-performance, and strive to let consumers remember our brand! Sincerely QIFGUO Customer Service Team |
Question: | what kind of connection does this speakers request? RCA or else |
Answer: | Yes, our CAT 8 Ethernet Cable support bandwidth up to 2000MHz and transmitting data at speeds of up to 40Gbps. |
Product description
Professional audio equipment that is perfect for any event
Our compact and portable Bluetooth powered sound system comes with all of the equipment and accessories you need for your event. Great for professional musicians, DJ's, and wedding event or concert equipment rental companies, our deluxe speaker system can be used both indoors and outdoors with many fixed installations. Use our professional quality speaker for Sunday worship services, theater events, music hall venues, or for your next corporate meeting.
Loaded with extra features:
- Built In FM tuner
- 2 inch tweeter
- 15 inch woofer 20Hz-20kHz, 102dB
- USB or SD player
- Wireless MP3 remote control
- Multi-colored LED flashing light display
- ON/OFF switch
- Two 1/4 inch microphone and 3.5mm AUX input, mics, echo, line and master volume controls
- 5 band slide graphic equalizer
- RCA line level outputs to link to another powered speaker
- 110V grounded wall plug for playing
- Speaker stand with adjustable pole mount
- Easy to grip handles
- Rolling rear wheels
- Instruction manual
- POWERED BLUETOOTH SPEAKER - Stream music from your phone to the built in Bluetooth receiver, integrated power amp with 1000 watts system power, multi-colored LED woofer flashing light display with ON/OFF switch
- EXTRA FEATURES - Built In FM tuner, USB or SD player with controls and remote, RCA, two 1/4 inch mic and 3. 5mm AUX input, mics, echo, line and master volume control, 5 band slide graphic equalizer, RCA line level outputs to link to another powered speaker
- HIGHEST QUALITY - Deluxe 15" woofer and 2" tweeter, 20Hz-20kHz, 102dB, rugged cabinet with rear wheels, handles, adjustable stand pole mount and is (H x L x W) 27" x 16" x 14"
- SYSTEM REQUIREMENTS - Any Bluetooth audio streaming device, standard US 110V grounded wall plug, any audio device with a standard RCA, 3. 5mm or 1/4 inch mic output. Use for DJ, PA, karaoke, live stage, party, beach or tailgating
- WHAT'S IN THE BOX - Acoustic Audio by Goldwood AA15LBS powered Bluetooth speaker with power cable, MP3 remote, wired mic with cable, speaker stand, instruction manual
User questions & answers
Question: | How do i connect the bluetooth? - jbd online |
Answer: | No this product comes as individual units. You would need to buy 2 if you wanted a pair. |
Question: | Does this have a battery or does it need to be plugged in to work |
Answer: | It's not uncommon. Any ambient RF can substantially raise the noise floor for these kinds of speakers. Isolating the power supply from other devices might help, but short of placing the speaker in a faraday cage, you are unlikly to get rid of that hiss. |
Question: | Can this device be hooked up to Wi-Fi |
Answer: | Hi, Alto Pro support here! The internal driver featured in the TS315s is 4ohm. Please note, this Sub is an active speaker and is not suitable for receiving an amplified signal. |
Question: | Could I use this for a wedding reception? 150-200 people |
Answer: | Hi, Alto Pro support here! Thanks for your question. Whilst our TS308 supports XLR/1/4" Jack connections, you can connect an RCA cable using an RCA > 1/4" Jack adapter. I hope this helps and If you have any further questions, please feel free to contact us directly - [email protected] Thanks, Krishan |
Product features
About us
We manufacture the highest quality audio products in the industry. We are a direct to consumer company cutting out the middle man ensuring you receive the quality product.
Product description
Acoustic Audio CS-IC83 Cinema Series 8" in-ceiling surround sound 3-way speakers are ideal for any home, office or entertainment area because they are designed with supreme performance in mind. Each speaker handles 350 watts of power and includes: a 8" Poly cone woofer for improved motion and higher bass response, a butyl rubber surround, a progressive spider for greater control and higher excursion capabilities, a poly mica midrange, a 13mm soft dome tweeter for detailed high frequencies and a 3-way passive crossover for greater fidelity. Spring loaded push terminals allow for easy connectivity and its low profile baffle housing was designed for simple installation and an improved frequency response. The white grill will coordinate well with any interior, or can be painted to match individual decor. Included is a cutout template to aid in the installation process and full instructions.
- Acoustic Audio CS-ic83 in ceiling speakers, recommended power is 20-350 watts per speaker, frequency response is 40Hz-20 kHz, efficiency is 95dB, 8ohm, 3-way design and functionality
- 8" woofers, high rigidity polypropylene cones with progressive spiders, butyl rubber surrounds, poly mica midranges, 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity
- Spring loaded speaker wire terminals, paintable grills and frames, cut out is 9.49", overall is 10.86", mounting depth 3.7", designed and engineered in the USA, full instructions included
- Use for in wall or in ceiling home entertainment, center channel, home theater, multiple room systems, industrial sound, outdoor entertainment areas, decks, patios, pools
- This listing and price is for 3 pair / 6 in ceiling speakers
User questions & answers
Question: | Do I need to buy separate mounts/brackets to hang them from the studs |
Answer: | Yes, it fits for iPhone 7/ iPhone 8. Hope this help. Mosnovo Team |
Question: | Is there a pre-construction bracket that will work for these |
Answer: | Yes, this will fit an iPhone 8...and it’s super cute and durable! I love mine. |
Question: | Are these speakers meant to be used as a pair with a left and right prewire? Or are they meant to be used as a single speaker |
Answer: | Yes, it fits for iPhone SE (2020). Hope this help. Mosnovo Team. |
Question: | What can be used for a connect amplifier with these speakers |
Answer: | Hello! Thank for your question. There is a slight transparency to this case so different colored phones will give the design a slightly different effect when worn. |
Product description
Acoustic Audio by Goldwood 251B Outdoor Mountable Wired 2 Speaker Set
- Traditional Passive speaker design, simply drive power from your amp or receiver
- Durable and Weatherproof against rain, snow, sun, ice and more
- Full Range sound coverage with 3-way tweeter, midrange and woofer configuration
- 4" Silver Poly Dynamic woofers with butyl rubber surrounds
- 2" Mylar dome midranges and .5" Mylar dome tweeters
- Frequency response is 37Hz-20 kHz with 99dB at 8ohm
- Easy To Install "U" mounting brackets with hardware
- Black ABS Sealed Cabinets with spring loaded raw wire connectors
- Big Sound from a compact speaker size of (H x W X D) 7.375" x 4.625" x 4.125" each
System Requirements
- Any amplifier, home receiver or stereo with raw speaker wire outputs
- Power from your amp should be no less than 20 and no more than 300 watts per channel
- CL3 or Raw Speaker Wire to connect your amp to the speakers
Applications
- Home Theater Surround Sound Systems
- Whole House Audio Systems
- Business or Retail Installations
- Patios, Decks, Pool and Spa Settings
What's in the box
- 2 Passive Speakers
- Mounting Brackets with Hardware
- Instruction Manual
- OUTDOOR MOUNTABLE WIRED SPEAKERS - Traditional passive speaker design, simply drive power from your amplifier or receiver. Full Range sound coverage with 3-way tweeter, midrange and woofer configuration
- WEATHERPROOF AND DURABLE - Black ABS sealed cabinets with spring loaded raw wire connectors and mounting brackets are weatherproof against rain, snow, sun, ice and more. Big sound from a compact speaker size of (H x W X D) 7.375" x 4.625" x 4.125" each
- HIGH QUALITY - 4" Silver CD woofers with butyl rubber surrounds, 2"mylar dome midranges, .5" mylar dome tweeters, frequency response of 37Hz-20 kHz with 99dB at 8ohm
- SYSTEM REQUIREMENTS - Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 20 and no more than 300 watts per channel, CL3 or raw speaker wire to connect your amp to the speakers
- WHAT'S IN THE BOX - 2 Acoustic Audio by Goldwood 251B speakers, mounting brackets with hardware, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations, patios, decks, pool and spa settings
User questions & answers
Question: | How well do the grills hold up around a saltwater pool |
Answer: | No |
Question: | Are these pretty much a box remake of the klh ones? If so i want them lol |
Answer: | The speaker would sound better in pairs. |
Question: | I would like to get a replacement mounting brackets. I lost 1 of the 2 mounting brackets |
Answer: | I have these speakers in 6 rooms in my house , I bought a 2 channel amp and speaker selector , and 2 sonos amps so i can control different rooms |
Question: | Is the housing (box) plastic, or cast metal |
Answer: | Hello, Yes it supports wireless charging for iPhone 8. Hope this help. Best Regards, Mosnovo Team |
Product description
Acoustic Audio CS-IC83 Cinema Series 8" in-ceiling surround sound 3-way speakers are ideal for any home, office or entertainment area because they are designed with supreme performance in mind. Each speaker handles 350 watts of power and includes: a 8" Poly cone woofer for improved motion and higher bass response, a butyl rubber surround, a progressive spider for greater control and higher excursion capabilities, a poly mica midrange, a 13mm soft dome tweeter for detailed high frequencies and a 3-way passive crossover for greater fidelity. Spring loaded push terminals allow for easy connectivity and its low profile baffle housing was designed for simple installation and an improved frequency response. The white grill will coordinate well with any interior, or can be painted to match individual decor. Included is a cutout template to aid in the installation process and full instructions.
- Acoustic Audio CS-ic83 in ceiling speakers, recommended power is 20-350 watts per speaker, frequency response is 40Hz-20 kHz, efficiency is 95dB, 8ohm, 3-way design and functionality
- 8" woofers, high rigidity polypropylene cones with progressive spiders, butyl rubber surrounds, poly mica midranges, 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity
- Spring loaded speaker wire terminals, paintable grills and frames, cut out is 9.49", overall is 10.86", mounting depth 3.7", designed and engineered in the USA, full instructions included
- Use for in wall or in ceiling home entertainment, center channel, home theater, multiple room systems, industrial sound, outdoor entertainment areas, decks, patios, pools
- This listing and price is for 3.5 pair / 7 in ceiling speakers
User questions & answers
Question: | Will they work outside |
Answer: | these are standard passive speakers |
Question: | I ordered these and I speaker was defective what Can I do to get it replaced the tweety portion was disconnected for its connection |
Answer: | I did not need my mounting brackets. I would be happy to sell you one or both at a reasonable price to include shipping.Looked on e-bay and found none. |
Question: | will they work with a panasonic receiver |
Answer: | The outer casting of the enclosure and grill is metal with additional plastic housing inside. |
Question: | My existing ceiling speakers are 10 inches from rim to rim. Would these speakers fit in my existing ones |
Answer: | No the mount bracket is on the back of the speakers. |
Product description
Our recessed sound system can be easily mounted into your ceiling or wall, and comes with all of the accessories you need for an unforgettable surround sound experience. From your living room, family room, bedroom, or home office, our built-in speaker set delivers a rich and full listening experience. Use for home theater surround sound, whole house audio systems, business conference rooms, or retail installations.
- Pressure lock mounting system (no additional hardware needed for installation)
- Full range sound coverage with 3-way woofer
- Midrange and tweeter configuration
- 8-inch high rigidity poly cone woofers with progressive spiders and butyl rubber surrounds
- Poly mica midranges
- 13 millimeter soft dome tweeters
- 3-way passive crossovers for greater fidelity
- Frequency response is 40Hz-20 kHz with 95dB at 8ohm
- Fits round speaker hole sizes of 9.49 inches with a mounting depth of 3.7 inches
- Overall speaker size of 10.86 inches
- Spring loaded raw wire connections
- Durable ABS housings and removable grills that can be painted to match your decor
Quick and easy installation
Each speaker features a unique pressure lock mounting system that clamps tightly to drywall, and fits round speaker holes the size of 9.49 inches with a mounting depth of 3.7 inches. The spring loaded connections, ABS housings, and grills can be painted to match your decor.
- FLUSH MOUNT IN CEILING SPEAKERS - Wide sound dispersion designed speakers easily integrate with new and existing audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp
- FULL RANGE 3-WAY SOUND - 8" High Rigidity Poly cone woofers with progressive spiders and butyl rubber surrounds, Poly Mica midranges and 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity, frequency response is 40Hz-20 kHz with 95dB at 8ohm
- EASY TO INSTALL - Pressure lock mounting system clamps tight to drywall, fits round speaker hole size of 9. 49" with a mounting depth of 3. 7", overall size of 10. 86" with spring loaded raw wire connections, durable ABS housings and grills can be painted to match your decor
- SYSTEM REQUIREMENTS - Any home audio receiver or amp with raw speaker wire outputs, power from your amp should be no less than 10 and no more than 350 watts per channel, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers
- WHAT'S IN THE BOX - 5 Acoustic Audio by Goldwood CS-IC83 speakers, removeable grills, cut-out templates, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations
User questions & answers
Question: | can I buy just 2 more additional speaakers? I need 5 inside and 2 on the outdoor patio |
Answer: | You would want to buy out door speakers and a single gang box,and use a volume control knob https://www.amazon.com/gp/aw/d/B000A5S926/ref=mp_s_a_1_sc_2?ie=UTF8&qid=1524106677&sr=1-2-spell&pi=AC_SX236_SY340_FMwebp_QL65&keywords=out+door+patio+speakers PWPBT57 |
Question: | I have Pyle bluetooth ceiling speakers &they beep each time you adjust the volume.does the bluetooth version of this brand beep when adjusting volume |
Answer: | Ours do not beep when adjusting the volume. They are silent. |
Question: | I Live in Egypt, the voltage is 220 v Would it work or does it need a stabilizer |
Answer: | These speakers operate on 70 Volts as delivered from a stereo amplifier. It is up to your amplifier, 220 volt or 110 volt, to output the correct voltage. |
Question: | Can somebody point me to a good amp for 7 of these that i can buy on amazon |
Answer: | Try researching Denon and Yamaha receivers speakers output is only good as your receiver. |
Product description
These are the perfect speakers for any occasion or application. They were designed with durability in mind, so there's no need to worry about rust or wear-and-tear. They make great additions to any surround sound home theater, will fit onto any bookshelf, can be used with any stereo system and are great to use In bathrooms and kitchens. Each speaker can handle 200 watts of power (100W RMS), and has a full range sound and functionality. Included mounting brackets allows hassle-free installation in any location.
- MOUNTABLE INDOOR WIRED SPEAKERS - Traditional passive speaker design, simply drive power from your amplifier or receiver
- HIGH QUALITY - Full Range sound coverage with 2.5" Polypropylene woofers, frequency response is 150Hz-20 kHz with 88dB at 8ohm
- DURABLE AND MOUNTABLE - Black ABS sealed cabinets with spring loaded raw wire connectors and mounting brackets. Big sound from a compact speaker size of (H x W X D) 3.5" x 3.5" x 4.5" each
- SYSTEM REQUIREMENTS - Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 20 and no more than 200 watts per channel, CL3 or raw speaker wire to connect your amp to the speakers
- WHAT'S IN THE BOX - 2 Acoustic Audio by Goldwood AA321B speakers, mounting brackets with hardware, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations, patios, decks, pool and spa settings
User questions & answers
Question: | Can i use 4 of these and the matching center with 2 psw505 for a decent HT? 14x14 room |
Answer: | Definitely yes, I have a Polk RM6750 subwoofer and 2 of this speakers with the matching center and they sound clear as water. Besides you can always lower your subs volume if its too much. Also remember the power your amp have is important, I'm using a Sony STR-DE335 amplifier which sends 100 watts per channel at 6 ohms and nothing has gone wrong yet. So far I have played music, movies and the morning news and I'm always happy about the clarity and loudness on only a 3.1 system. My guess is yours is going to sound much better with the 5.2 you are building. Nice pick and good luck with your shopping. |
Question: | Do these have a screw hole in the back for mounting on a speaker stand |
Answer: | No. They come with a mount that slides into a dove tail slot on the back of the speaker. The mount has limited movement. No 90 degree angles. |
Question: | can these speakers work with the audio-techica at-lp60 usb turntable |
Answer: | Answering late...for others needing help - you need active speakers to connect directly to the turntable otherwise you will need to connect the turntable & these speakers to an amplifier. |
Question: | can you use a split copper speaker wire to connect from an old school amplifier to the speakers |
Answer: | That's the way they were designed to be hooked up, so yes. Heck, I use old lamp cord and they work as well as they can for their size. |
Product features
Polypropylene Full Range Woofer
AA321 bookshelf speakers have a booming yet compact 2.5" Polypropylene full range woofer with Butyl rubber surrounds for protection. The heavy duty ABS construction of their sealed cabinets make these speakers not only durable, but a sleek and stylish addition any indoor system.
Fully Directional Swivel Wall Attachment
Each speaker includes a durable, fully directional swivel wall mount attachment and 4 wall screws. Add precise sound to your home surround sound system by mounting these discrete speakers around the listening area. Turn or tilt the speaker to direct the sound exactly where you want it.
Spring Loaded Wire Terminals
These small, yet sophisticated speakers provide quick release spring loaded wire terminals providing a hassle-free connection to an already established surround sound system. Tuck them into tight corners and high up places without sacrificing accurate and clean sound.
Acoustic Audio by Goldwood AA321 Indoor Mountable Bookshelf Speakers
At 200 Watts Peak Power per speaker, these multi-purpose indoor speakers pack a punch. They were designed to be durable with heavy duty ABS construction sealed cabinets so there is no need to worry about wear-and-tear. At 3.5" high, they make great additions to any surround sound home theater, will fit onto any bookshelf and can be used with any stereo system. With full range sound, 2-way functionality and an unbeatable price adding these speakers to your system is a no brainer.
Simple Design and Easy Installation
Our simple, smooth design, with a choice between black or white finish, allows you to incorporate these speakers into any location. With quick release spring loaded wire terminals, connecting your new speakers to an existing system is a breeze. Seamlessly tuck them into the smallest spaces of your listening area without ever having to forfeit sound quality.
Swivel Wall Attachment
We made sure you are able to place your indoor speakers in your ideal location by adding a swivel attachment and 4 wall screws to mount to any wall. Simply screw the attachment into your desired place and slide the attachment into the custom insert on the back of the speaker. From here you can swivel left, right up or down to whatever degree you choose, guaranteeing focused sound quality exactly where you want it.
Product description
Acoustic Audio by Goldwood AA15BT Powered Bluetooth Speaker Stream music from your phone to the built in Bluetooth receiver Integrated power amplifier with 1000 Watts system power Built In FM tuner USB drive or SD card player with controls and remote RCA line level 1/4 inch mic 1/4 inch instrument and 3 5mm AUX inputs Mic 1 Mic 2 MP3/line echo and master volume control knobs Five band slide Graphic Equalizer RCA line level outputs to link to another powered speaker 2-Way design and functionality with deluxe 15" woofer and 2" tweeter Frequency response is 20Hz-20kHz with 102dB sensitivity at 4ohm Rugged cabinet has rear wheels handles adjustable stand pole mount and is (H x L x W) 27" x 16" x 14" System Requirements Any Bluetooth audio streaming device Standard US 110V grounded wall plug for charging and playing Any audio device with a standard RCA 3 5mm or 1/4 inch mic outputs Applications DJ PA or Karaoke Party Beach or Tailgating Studio Monitor or Live Stage What's in the box 1 Powered Bluetooth Speaker with power cable 1 MP3 Remote Instruction Manual
- Powered Bluetooth speaker - stream music from your phone to the built in Bluetooth receiver integrated power amp with 1000 watts system power
- Extra features - built in FM tuner USB or SD player with controls and remote RCA two 1/4 inch mic and 3 5mm aux input mics echo line and Master volume control knobs 5 band slide Graphic equalizer RCA line level outputs to link to another powered speaker
- Highest Quality - deluxe 15" Woofer and 2" Tweeter 20hz-20khz 102dB rugged cabinet with rear wheels handles adjustable stand pole Mount and is (H x L x W) 27" X 16" X 14"
- System requirements - any Bluetooth Audio streaming device standard US 110V grounded wall plug any Audio device with a standard RCA 3 5mm or 1/4 inch mic output Use for DJ PA Karaoke live stage party beach or tailgating
- What's in the box - Acoustic Audio by Goldwood AA15BT powered Bluetooth speaker with power cable MP3 remote instruction manual
User questions & answers
Question: | How long does it take to charge |
Answer: | It seems to take overnight |
Question: | Is this AC and battery powered |
Answer: | AC only |
Question: | how do you get the blue tooth operational |
Answer: | We pressed the mode button that is under the little screen. We pressed it until it said "blue." Then paired my iPad and phone to the speaker. |
Product description
This Acoustic Audio by Goldwood Bluetooth 2.1 speaker system features a contemporary design and is a stylish addition to any home. This 350 watt, 3-piece system includes one powered subwoofer and two satellite speakers as well as the necessary cable and instructions needed to "plug and play" any audio source. Use it with your home theater stereo system, cell phone, personal computer, laptop, DVD player, TV, gaming system, MP3 player, or other devices with a 3.5mm or RCA audio output (3.5mm to RCA cable included). The powered subwoofer features a front-firing woofer and utilizes a digitally tuned wooden enclosure for increased bass response. You can also control the volume function directly from the subwoofer. The full-range satellite speakers feature magnetic shielding for use near televisions and computer monitors.
- BLUETOOTH 2.1 MULTIMEDIA SPEAKER SYSTEM - Stream music from your phone to the built in Bluetooth receiver, integrated power amp with 350 watts system power
- EASY PLUG AND PLAY CONNECTIONS - Standard dual RCA stereo inputs connect to most audio sources, illuminated front panel controls, USB drive and SD card input, full function remote
- HIGHEST QUALITY - Powered subwoofer speaker is 12.25" x 6.75" x 12.5", 40Hz-20 kHz, 2 wired satellite speakers are 6.75" x 4.125" x 3.75" each, satellite speakers have 6 foot single RCA cables
- SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any audio device with a standard 3.5mm headphone or RCA stereo audio outputs. Use for TV or home entertainment, laptop or PC, DVD or MP3 player, gaming
- WHAT'S IN THE BOX - Acoustic Audio by Goldwood AA2171 powered subwoofer speaker, 2 passive wired satellite speakers, full function remote, 3.5mm to RCA cable, RCA to RCA cable, instruction manual
User questions & answers
Question: | is the extended warranty / " Protection Plan" worth it or is it a scam with many loopholes |
Answer: | 1 year. |
Question: | So the speakers are connected to the subwoofer by rca cable |
Answer: | But this number is the search box on Amazon B004N6X7MU for the ext cables. |
Question: | Why do the speakers constantly keep disconnecting. For example, bluetooth will spontaneously disconnect and 3 lines will appear |
Answer: | Sorry. We've never experienced that. Does your bluetooth driver need to be updated? Or you could try this.....After reboot, follow these steps: Go back to Device manager. Click on the Bluetooth drop down. Right-click on your Bluetooth Adapter choose Properties. Go to the Power Management Tab. Uncheck Allow the computer to turn off this device to save power. |
Question: | Bluetooth connection in subwoofer |
Answer: | The system itself has Bluetooth capabilities (To connect to devices). However, the sub is basically the main unit so the satellite speakers are wired (Single RCA connection each) and not wireless. |
Product description
Acoustic Audio CS-IC83 Cinema Series 8" in-ceiling surround sound 3-way speakers are ideal for any home, office or entertainment area because they are designed with supreme performance in mind. Each speaker handles 350 watts of power and includes: a 8" Poly cone woofer for improved motion and higher bass response, a butyl rubber surround, a progressive spider for greater control and higher excursion capabilities, a poly mica midrange, a 13mm soft dome tweeter for detailed high frequencies and a 3-way passive crossover for greater fidelity. Spring loaded push terminals allow for easy connectivity and its low profile baffle housing was designed for simple installation and an improved frequency response. The white grill will coordinate well with any interior, or can be painted to match individual decor. Included is a cutout template to aid in the installation process and full instructions.
- Acoustic Audio CS-ic83 in ceiling speakers, recommended power is 20-350 watts per speaker, frequency response is 40Hz-20 kHz, efficiency is 95dB, 8ohm, 3-way design and functionality
- 8" woofers, high rigidity polypropylene cones with progressive spiders, butyl rubber surrounds, poly mica midranges, 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity
- Spring loaded speaker wire terminals, paintable grills and frames, cut out is 9.49", overall is 10.86", mounting depth 3.7", designed and engineered in the USA, full instructions included
- Use for in wall or in ceiling home entertainment, center channel, home theater, multiple room systems, industrial sound, outdoor entertainment areas, decks, patios, pools
- This listing and price is for 2 pair / 4 in ceiling speakers
User questions & answers
Question: | Is pyle pta44bt amplifier good for this set of 4 speakers |
Answer: | Sure |
Question: | does they support blue tooth |
Answer: | Should work |
Question: | Are these speakers any good |
Answer: | In all honesty, I don't know. Mine are mounted outside but nowhere near any salt water. I would assume that if the speakers are positioned at least three to five feet away from the salt water pool there shouldn't be much of an issue unless the speakers are under an overhang that would direct the salt air (with salt water vapor) towards the speakers. That would be bad for anything made of metal. |
- **The wireless module requires a power cord to function and speaker cables to connect to rear speakers**
User questions & answers
Question: | Wish this had a guide or web site. Having trouble making sure all the speakers are working. Please advise? Thanks |
Answer: | Package has pairing instructions |
Question: | Can this system be controled by a universel remote app on my I phone |
Answer: | It should work. Ive got all mine set up on voice control with google and it works fine |
Question: | Do i need a head unit to power the speakers |
Answer: | You need whatever you want to listen to for an input signal. The sound Bar has it's own amp and has 3mm, Optical, HDMI and Bluetooth inputs. The surround speakers are wired to a remote unit that receives the signal from the sound bar and powers the speakers. |
Question: | Is it compatible with Bluetooth |
Answer: | Yes. Multiple devices. |
Product description
Acoustic Audio by Goldwood R192 Frameless Flush Mount In Ceiling 5 Speaker Set Center Channel with Front and Rear, Right and Left home theater configuration Wide Sound Dispersion Designed Speakers easily integrate with new and existing audio systems Traditional Passive speaker design, simply drive power from your home audio receiver or amp Flush Mount low profile housings install easy with unique Pressure Lock Mounting System Paintable edge-to-edge grills magnetically attach over the frames giving a frameless appearance Full Range sound coverage with 2-way woofer and tweeter configuration 5. 25" High Rigidity Poly cone woofers with progressive spiders and butyl rubber surrounds . 5" Mylar tweeters Frequency response is 45Hz-22 kHz with 95dB at 8ohm Pressure Lock Mounting System clamps tight to drywall with No Hardware Needed Fits round speaker hole size of 7" with a mounting depth of 3" Overall speaker size of 7. 9" with Spring Loaded raw wire connections System Requirements Any home audio receiver or amplifier with raw speaker wire outputs Your receiver power should be no less than 10 and no more than 200 watts per channel CL3 Rated in wall certified raw speaker wire to connect your receiver to the speakers Applications Home Theater Surround Sound Systems Whole House Audio Systems Business or Retail Installations What's in the box 5 Flush Mount Passive Speakers with Removeable Grills Cut-Out Templates Instruction Manual
- FRAMELESS FLUSH MOUNT IN CEILING SPEAKERS - Wide sound dispersion designed speakers easily integrate with new and existing audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp
- FULL RANGE 2-WAY SOUND - 5. 25" High Rigidity Polypropylene cone woofers with butyl rubber surrounds, . 5" Mylar tweeters, frequency response is 45Hz-22 kHz with 95dB at 8ohm
- FRAMELESS DESIGN - Paintable edge-to-edge grills magnetically attach over the frames giving a frameless appearance, pressure lock mounting system clamps tight to drywall, fits round speaker hole size of 7" with a mounting depth of 3", overall size of 7. 9" with spring loaded raw wire connections
- SYSTEM REQUIREMENTS - Any home audio receiver or amp with raw speaker wire outputs, power from your amp should be no less than 10 and no more than 200 watts per channel, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers
- WHAT'S IN THE BOX - 5 Acoustic Audio by Goldwood R192 speakers, removeable grills, cut-out templates, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations
User questions & answers
Question: | do these sound good loud? Or will you get some distortion |
Answer: | Only if the devise they are attached to does. They are just speakers. |
Question: | Has anyone mounted these in both wall and ceiling, what are the differences on install? someone stated they were not for wall installs |
Answer: | I'm happy with them! I wired 12 speakers throughout the house, 5 speakers in the living room for surround sound (which sound great) and 7 in other rooms. I'm having a little trouble getting good sound out of the rest of the house. However, I believe that to be more of a wiring issue as opposed to a speaker quality issue. Ask me again when I add another amp for the 7 speakers outside of the living room! :-) |
Question: | Can these mount to acoustical/fake ceiling |
Answer: | designed for indoor use |
Question: | Which amp will connect all 5 speakers? Can i connect to Pyle wall mount receiver instead of an amp, and connect aux cord to play music from phone |
Answer: | Ask for replacement |
Product description
Acoustic Audio by Goldwood AAT5005 Bluetooth 5.1 Speaker System
Stream music from your phone to the built in Bluetooth Receiver
Integrated Power Amplifier with 1000 Watts System Power
Pro Surround Function Automatically Converts Stereo to 5.1 Sound
Easy Plug and Play RCA Inputs connect to most audio sources
6 Independent RCA Inputs for True Surround
Stereo RCA AUX Inputs
Front Panel Controls with USB Drive and SD Card Inputs
Full Function Remote
1 Powered Extreme Bass Sub with 8" Woofer is (H x W x D) 14.5" x 9.25" x 16.25"
Frequency Response is 20Hz-20 kHz
1 Wired 2-Way Bookshelf Center Speaker is (H x W x D) 4.75" x 15.875" x 2.75"
4 Wired 2-Way Tower Satellite Speakers are (H x W x D) 41.5" x 4.25" x 2.25" with 7.75" x 10" Bases each
2 Front and 1 Center Speakers have 6 Foot Single RCA to raw speaker wire cables
2 Rear Speakers have 25 Foot Single RCA to raw speaker wire cables
System Requirements
Standard US 110V Grounded Wall Plug
Any audio device with a standard 3.5mm Headphone, RCA Stereo or RCA 6 Channel Surround Audio Outputs
Search AAT5005D for this model with Smart TV Digital Optical Input
Applications
TV or Home Entertainment System
DVD, Laptop or PC
Gaming
What's in the boxes
1 Powered Subwoofer Speaker
1 Passive Wired Center Speaker
4 Passive Wired Tower Speakers
Full Function Remote
3.5mm to RCA Cable
1 RCA to RCA Jack Cable
Instruction Manual
- BLUETOOTH 5.1 HOME TOWER SPEAKER SYSTEM - Stream music from your phone to the built in Bluetooth receiver, integrated power amp with 1000 watts system power, Pro Surround function automatically converts stereo to 5.1 sound
- EASY PLUG AND PLAY CONNECTIONS - Standard RCA inputs connect to most audio sources, 6 independent RCA inputs for true surround, stereo RCA AUX inputs, front panel controls with USB drive and SD card input
- HIGHEST QUALITY - Powered ported subwoofer with 8" woofer is 14.5" x 9.25" x 16.25", wired center speaker is 4.75" x 15.875" x 2.75", 4 wired tower speakers are 41.5" x 4.25" x 2.25" each, 2 fronts and center have a 6 foot single RCA to raw speaker wire cables, 2 rear speakers have 25 foot single RCA to raw speaker wire cables
- SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any audio device with a standard 3.5mm headphone or RCA stereo or RCA 6 channel surround audio outputs. Use for TV or home entertainment, laptop or PC, DVD or MP3 player, gaming
- WHAT'S IN THE BOXES - Acoustic Audio by Goldwood AAT5005 powered sub, wired center speaker, 4 wired tower speakers, remote control, 3.5mm to RCA cable, 1 RCA to RCA Jack Cable, instruction manual
Latest Reviews
View all
Dental Wedges
- Updated: 25.04.2023
- Read reviews

Land Roller Skates
- Updated: 03.07.2023
- Read reviews

Heavy Duty Queen Bed Frame
- Updated: 22.04.2023
- Read reviews

Laser Printer All In One
- Updated: 21.06.2023
- Read reviews

Gondola Shelving
- Updated: 20.02.2023
- Read reviews