12 best home theater in a boxs

Product description

Dynamic sound and streamlined simplicity define the HT-S3900 with analog amplification and heavyweight micro speakers transforming thin TV sound into explosive Sonics for games, sporting events, blockbuster movies, live concerts, and more. Conceal amp and media players in an AV unit, connect your display with a single HDMI cable, and enjoy theater-quality surround-sound without the mess. Bluetooth technology is on board for wireless music streaming via mobile and laptop apps with low-latency Qualcomm apt codec. Enjoy your free time without compromise in one easy package.

• 120 W/Ch. (6 ohms, 1 kHz, 10% THD, 1 Channel Driven) with discrete output stage circuitry and six-channel analog amplifiers
• HDMI 4 in/ 1 out pass-through of the latest Ultra HD 4K/60 Hz, video formats with HDR (high dynamic range) and HDCP 2.2 content protection. Tone Control ±10 dB, 100 Hz (Bass).±10 dB, 10 kHz (Treble). Signal-to-Noise Ratio- 106 dB (Line, IHF-A Network, 1 k-Ohm Shorted). 106 dB (Line, IHF-A Network, 1 k-Ohm Shorted)- 6 Ohms–16 Ohms
• Dolby Trued and DTS-HD Master Audio decoding. THD+N (Total Harmonic Distortion + Noise): 0.06 percentage (20Hz-20kHz, 8 Ohms, 1 Channel Driven, 50 W). Input Sensitivity and Impedance : 250 mV/47 k-ohms (Line)
• Easily enjoy streaming music with Bluetooth wireless technology with Qualcomm apt Audio
• Includes high-quality six-piece surround-sound speaker system that's just the right size for smaller living spaces

User questions & answers

Question:	are these speakers wireless
Answer:	no
Question:	can I run it without the rear speakers via altering settings on receiver
Answer:	Yes, you can enable or disable the surround speakers in the settings. -JM
Question:	roof antenna coax for tv..where would it attach to, on the back of this unit
Answer:	No, roof antenna coax attaches to your TV. The first HDMI output (receiver out -> TV in) supports ARC. So OTA broadcast TV audio travels back to the receiver via the same HDMI cable.
Question:	Does it works with 4K tv
Answer:	The question is: Does it works with no-4k tv?

Product features

Surround-Soundtracks at Studio Resolution

The included receiver decodes Dolby TrueHD and DTS-HD Master Audio, the most popular lossless multichannel soundtrack formats common to Blu-ray Disc. Enjoy authentic movie sound as the director intended right away, with everything you need to transform your experience in a single carton.

HDMI Brings The Future Home

Connect your players with just one cable linking to the TV for clean AV unit installation. HDMI terminals pass the latest video formats to your display, including those supporting 4K/60 Hz, HDR, BT.2020, and HDCP 2.2. There's also an Audio Return Channel (ARC) for amplifying TV broadcasts.

Amp Power Adds Thrills to Music, Movies, Gaming, and TV Programs

Discrete analog amps (not an all-in-one integrated circuit) deliver high instantaneous current to the speaker system for dynamic audio reproduction. Controlled power is the cornerstone of Onkyo's amplification philosophy.

This gives the HT-S3900 120 W/Ch (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven) 60 W/Ch (8 Ohms, 20 Hz-20 kHz, 0.7% THD, 2 Channels Driven, FTC).

Bluetooth Wireless Technology Featuring Qualcomm aptX audio

Bluetooth wireless technology mirrors whatever's playing on your mobile device, laptop, or PC on the home theater. Devices* supporting Qualcomm aptX codec deliver virtually lossless low-latency playback, while original Advanced Music Optimizer mode enriches any compressed audio for a more satisfying musical experience.

*Streaming device not included

Easy Connection Guide Simplifies Setup

Connections to speakers and external devices are clearly labeled and illustrated on the rear panel-the connection diagram is readable upside down to make things easy when you're leaning over the top of the receiver. Color-coded speaker cables are also included.

Compact and Powerful Speaker System

The HT-S3900 features an impressively powerful six-piece speaker system that's just the right size for smaller rooms. Front L/R, center, and surround L/R speakers feature a full-range drivers that projects a big audio picture, while the subwoofer adds oomph to every explosion and bass-drum kick. With high-gloss finish and solid feel, these speakers deliver authentic surround without overwhelming your interior design.

Enjoy Music via USB Input

Connect a compatible USB memory device filled with MP3, WMA, or AAC audio files to enjoy clear and powerful reproduction of your music. Quality D/A conversion and a selection of DSP listening programs further enhance sound to suit different kinds of music.

Product description

Get everything you need for a great sounding home theater speaker setup in a single box! You get four satellite speakers and a center channel speaker for the mid- and high-range audio signals, plus an 8-Inch powered subwoofer to handle the low frequencies. All the speakers come with an attractive black finish and convenient spring-loaded signal connectors. The center speakers use two 3-Inch shielded mid-range cones, while the satellites employ one 3-Inch cone and a 1/2-Inch dome tweeter. However, don't let the small size fool you! These 8 ohm speakers will handle up to 125 watts of power from your home theater receiver at frequencies from 150 Hz to 20 kHz. The subwoofer is powered by a 60 watt (RMS) amplifier, driving a downward firing 8-Inch cone. It can take either line or speaker-level inputs, so can be used with any amplifier, even older amps without dedicated subwoofer outputs. The subwoofer handles frequencies between 50 Hz to 250 Hz and includes adjustable crossover frequency and volume balance controls. Also included in the box are four C brackets for mounting the satellite speakers to the wall and the necessary hardware for mounting the speakers to the brackets. A pair of plastic feet to properly orient the face of the center speaker is also included. Note that you will need to provide your own hardware for mounting the C brackets to the wall or other vertical surface. Don't let the low price fool you! This speaker system sounds great and will fill your room with high-quality, full-spectrum sound! Note: The speaker wire connectors on each unit comfortably accept a maximum 16 gauge speaker wire. For best results use pin-type speaker plugs to make the speaker connections and banana or pin-type plugs to connect the wires to your amplifier.

• Surround yourself in high-fidelity with the Monoprice 5.1-channel Home Theater Speaker System!
• This speaker system features four satellite speakers and a center channel speaker for the mid- and high-range audio signals, plus an 8" powered subwoofer to handle the low frequencies. All the speakers come with an attractive black finish and convenient spring-loaded signal connectors.
• The center speakers use two 3" shielded mid-range cones, while the satellites employ one 3" cone and a 1/2" dome tweeter. However, don't let the small size fool you! These 8 ohm speakers will handle up to 125 watts of power from your home theater receiver at frequencies from 150 Hz to 20 kHz.
• The subwoofer is powered by a 60 watt (RMS) amplifier, driving a downward firing 8" cone. It can take either line or speaker-level inputs, so can be used with any amplifier, even older amps without dedicated subwoofer outputs. The subwoofer handles frequencies between 50 Hz to 250 Hz and includes adjustable crossover frequency and volume balance controls.
• Also included in the box are four C brackets for mounting the satellite speakers to the wall and the necessary hardware for mounting the speakers to the brackets. A pair of plastic feet to properly orient the face of the center speaker is also included. Note that you will need to provide your own hardware for mounting the C brackets to the wall or other vertical surface.

User questions & answers

Question:	What speaker stands work with the Monoprice
Answer:	Any stand will work. I purchased wall mounts for my surround speakers.
Question:	Could I use this with a receiver and what would I need to do to get it to work correctly
Answer:	It will work with any 80-100w/ channel receiver. Connect using banana plugs and 14 gauge speaker wire. Make sure to get the woofer spreaker cable with a Y splitter. Monoprice website sells all the cables you need at a great price. Better than amazon
Question:	Could anyone recommend a set of towers to make this a 7.1 system
Answer:	I would definitely agree. Monoprice sells a set of two of the speakers separately for use on their own as a 2 channel system or as an add on to this 5.1 system to make it 7.1. They even sell the subwoofer separately as well if you ever want to upgrade to a true 7.2 system. Then everything will be perfectly matched. Make sure to get the correct set of two Premium Monoprice speakers. Monoprice also sells a lower quality standard 5.1 surround sound system and a set of two extras of that type as well. If you have the correct set, they will exactly match the speakers in the Monoprice Premium 5.1 surround sound speaker set. I know this because I actually had what I thought was the correct one in my shopping cart only to find out it was the wrong set just before pulling the trigger. So it's an easy mistake to make even when you've done a bunch of research. I hope you enjoy your system. They are absolutely amazing speakers. My family is constantly amazed at how much information and nuance is embedded in soundtracks of our favorite movies and shows that we never heard with our previous home theater system. It's like a completely different experience now. Good luck.
Question:	What are the dimensions of the individual speakers? I'm espescially curious on the size of the center channel
Answer:	The center channel is 4x9.5x4 Height, width, Depth respectively. The Subwoofer:12x10x12, The Satellites are :6x4x4

Product features

Monoprice 5.1 Channel Home Theater Satellite Speakers And Subwoofer - Black

This headphone amplifier features a USB input and a professional level Texas Instruments Digital to Analog Converter (DAC), effectively replacing your sound card without requiring you to open your PC and installing a new card. The high-current output allows it to drive headphones with a wide range of impedances, from 16 ohms to 600 ohms.

The RCA line outputs allow you to send the output to a stereo amplifier or powered speakers for those times when you don't want to use headphones. A set of RCA line inputs allows you to connect an external audio source, such as a CD player, so you can enjoy the advantages of the high-current headphone output with other audio sources.

Product description

Yamaha Audio YHT-5950U 4K Ultra HD 5. Channel Home Theater System with Wi-Fi, Bluetooth and Music Cast. Works with Alexa.

• Your Purchase Includes: 1 Wi-Fi enabled home theater in a box system with a music cast AV receiver, 5 wired speakers, a subwoofer and speaker wire in a single package
• Clear, powerful 5; 1 Channel surround sound; 4K Ultra HD HDMI (4 in/1 out) with HDR10 and Dolby Vision
• Easy setup with Yamaha YPAO room optimization and flexible speaker placement options, including virtual cinema front
• Wi-Fi, Bluetooth, airplay 2, Spotify connect and Music Cast multi room; Music Cast Surround Capable: Add Music Cast 20 speakers to create a 5.1-channel setup with wireless rear surrounds
• Add Music Cast 20 speakers to create a 5.1-channel setup with wireless rear surrounds (Sold separately)
• Spotify, Pandora, Sirius internet radio, TIDAL, Deeper, Napster and more. System Frequency Response - 28Hz–25kHz. Impedance - 6 ohms (without subwoofer)

User questions & answers

Question:	Are the speakers completely wireless? All 5 speakers
Answer:	Thanks for your question. The five speakers must be hard wired to the appropriate connections on the rear of the receiver. The unit supports Bluetooth streaming - both streaming out and streaming in. It may be possible to use wireless Bluetooth speakers in another room (within range) but can not stream surround sound. World Wide Stereo is 40 years old and a proud authorized Yamaha dealer.
Question:	Are the rear speakers that are included wireless capable
Answer:	No they are not. The system can play wireless speakers that you buy extra ($400)
Question:	Can the receiver play on two zones (via different inputs) at the same time
Answer:	Yes, Please see below link for more details: https://usa.yamaha.com/products/audio_visual/home_theater_systems/yht-5950u/specs.html#product-tabs
Question:	Is there a dvd or CD player
Answer:	Yes there is. Use your BD/DVD Option to hookup your DVD/Cd player

Product features

YHT-5950 Home Theater System with MusicCast

This Wi-Fi-enabled 5.1-channel home theater system includes a MusicCast AV receiver, five speakers, a subwoofer and speaker wire in a single package that brings together the best of cinematic sound with versatile streaming capabilities.

Product description

The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last. Features: Harmonic Distortion: 0.3% 2 x 120 Watt RMS at four Ohms Blue LED Output Level Display Frequency Response: 20 Hz-20 kHz Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches) Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz) Dimensions: 8.27’’ x 2.72’’ x 5.39’’ inches.

From the Manufacturer

• 2X120 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your PA & home theater acoustic surround sound system. Gives you 2x120 watts power which can be used for multi speakers w/ 4 8 ohms impedance, enjoy high quality music & movies
• MULTIPLE INPUTS: This personal portable digital amp box supports various external sources 3 3.5mm AUX for tuner, CD DVD, MP3, computer, iPad, iPhone & cell phone, 1/4" mic in & 1/4" headphone jack input. Also features a REC RCA output for recording
• PAGER/MIXING MODE: The professional integrated stereo receiver features pager & mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting & meetings. Switch to mixing mode for a fun karaoke session. Dimensions (W x H x D): 8.2x 6.6x 2.8 inches
• USB 2.0 INPUT: It features a USB input to support flash drives or similar USB devices w/ LED indicator beside the port. It allows you to play your favorite audio files from your computer's media library when you connect it directly to the amplifier. Rated power input 750mV
• EQ CONTROLS: The improved compact bookshelf sound amplifier features crisp & responsive buttons for power switch, MP3 controls previous, next, play/pause & rotary knob controls for input select, MIC, master, balance, bass & treble volume controls

User questions & answers

Question:	is it safe to hook up the sony ss-b1000 5-1/4 inch book shelfspeakers to this amp
Answer:	Yes, assuming you hook them up correctly!. I have some 70's vintage Technics speakers running on it just fine.
Question:	I hear "static" at low volume (definitely not the speskers). Any suggestions
Answer:	Disconnect your input source to the amplifier. If the noise goes away, then it's coming from the source and not the amplifier. If the noise continues, disconnect all inputs. If you hear the noise, the problem is likely the amplifier.
Question:	is there a way to hook up to a new flat screen tv to run a set of external speakers
Answer:	You asked this a while ago, so I'm guessing you've found out by now. This receiver does not have HDMI or Optical inputs, only RCA inputs. Most new TVs no longer come with RCA out, but many have a headphone output. If your TV has a headphone output, you can get a headphone to RCA adapter and use that to connect to this receiver.
Question:	Can I run an RCA cord from my TV to this amp? The input/output schematic does not show a TV
Answer:	All 3 inputs are RCA, just pick one :) Just because it says "CD" or "Aux" doesn't specifically mean you must use that device, RCA is RCA. However, I wouldn't recommend purchasing it. Mine died (non smoking house, didn't overheat or push it too far) within 1 month of use. I decided to go with the Dayton Audio APA150, which has been a workhorse since day 1 with no issues and much better consumer ratings than this Pyle of junk. Happy hunting.

Product description

Our recessed sound system can be easily mounted into your ceiling or wall, and comes with all of the accessories you need for an unforgettable surround sound experience. From your living room, family room, bedroom, or home office, our built-in speaker set delivers a rich and full listening experience. Use for home theater surround sound, whole house audio systems, business conference rooms, or retail installations.



- Pressure lock mounting system (no additional hardware needed for installation)

- Full range sound coverage with 3-way woofer

- Midrange and tweeter configuration

- 8-inch high rigidity poly cone woofers with progressive spiders and butyl rubber surrounds

- Poly mica midranges

- 13 millimeter soft dome tweeters

- 3-way passive crossovers for greater fidelity

- Frequency response is 40Hz-20 kHz with 95dB at 8ohm

- Fits round speaker hole sizes of 9.49 inches with a mounting depth of 3.7 inches

- Overall speaker size of 10.86 inches

- Spring loaded raw wire connections

- Durable ABS housings and removable grills that can be painted to match your decor



Quick and easy installation

Each speaker features a unique pressure lock mounting system that clamps tightly to drywall, and fits round speaker holes the size of 9.49 inches with a mounting depth of 3.7 inches. The spring loaded connections, ABS housings, and grills can be painted to match your decor.

• FLUSH MOUNT IN CEILING SPEAKERS - Wide sound dispersion designed speakers easily integrate with new and existing audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp
• FULL RANGE 3-WAY SOUND - 8" High Rigidity Poly cone woofers with progressive spiders and butyl rubber surrounds, Poly Mica midranges and 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity, frequency response is 40Hz-20 kHz with 95dB at 8ohm
• EASY TO INSTALL - Pressure lock mounting system clamps tight to drywall, fits round speaker hole size of 9. 49" with a mounting depth of 3. 7", overall size of 10. 86" with spring loaded raw wire connections, durable ABS housings and grills can be painted to match your decor
• SYSTEM REQUIREMENTS - Any home audio receiver or amp with raw speaker wire outputs, power from your amp should be no less than 10 and no more than 350 watts per channel, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers
• WHAT'S IN THE BOX - 5 Acoustic Audio by Goldwood CS-IC83 speakers, removeable grills, cut-out templates, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations

User questions & answers

Question:	can I buy just 2 more additional speaakers? I need 5 inside and 2 on the outdoor patio
Answer:	You would want to buy out door speakers and a single gang box,and use a volume control knob https://www.amazon.com/gp/aw/d/B000A5S926/ref=mp_s_a_1_sc_2?ie=UTF8&qid=1524106677&sr=1-2-spell&pi=AC_SX236_SY340_FMwebp_QL65&keywords=out+door+patio+speakers PWPBT57
Question:	I have Pyle bluetooth ceiling speakers &they beep each time you adjust the volume.does the bluetooth version of this brand beep when adjusting volume
Answer:	Ours do not beep when adjusting the volume. They are silent.
Question:	I Live in Egypt, the voltage is 220 v Would it work or does it need a stabilizer
Answer:	These speakers operate on 70 Volts as delivered from a stereo amplifier. It is up to your amplifier, 220 volt or 110 volt, to output the correct voltage.
Question:	Can somebody point me to a good amp for 7 of these that i can buy on amazon
Answer:	Try researching Denon and Yamaha receivers speakers output is only good as your receiver.

Product description

Build a completely stealth, in-wall home theater with the RC85i as left, right or center channels and add a pair or more of RC65i as surrounds, or complete a more traditional speaker system with additional multi-zone sound. Built-in audio within reach with easy installation in 3 steps - cut a hole, feed the wires through, and simply drop the speaker in. The rotating cams secure the speakers safely and ensure vibration-free efficiency with no extra assembly or mess. Paintable grilles allow the RC85i to blend in perfectly with the decor, virtually making them disappear. Dynamic Balance drivers and aimable swivel tweeters provide realistic imaging and deliver full, clear sound for movies, music, sports and video games, in any listening position. Timbre-matched with other Polk Audio speakers for seamless blending and exceptional audio clarity when used in a home theater setup.

The Polk RC85i utilizes an eight-inch dynamic-balance, mineral filled polymer-composite cone with a rubber surround that outlasts cheaper foam surrounds, as well as a one-inch dynamic-balance, metalized soft dome tweeter with a swivel mount. The swivel-mounted tweeter is aimable for direct high frequency control that ensures spacious imaging with amazing clarity, and well-balanced sound in any listening position, even off-axis listening positions, rather than in just a small sweet spot.

Constructed of durable, moisture resistant materials, the RC85i is safe for use in bathrooms, kitchens, saunas, or even under outdoor eaves, and features a wide-dispersion design for even sound-coverage throughout even large rooms. The RC85i also features infinite baffle tuning which uses the virtual enclosure of in-wall space for superior bass response, and is timbre-matched to the Polk Audio Monitor Series for seamless, enveloping imaging when used in a home theater system.

What's in the Box

RC85i speakers (pair), 2 grilles, cardboard template, owner's manual, and registration card.

• HEAR SEAMLESS AUDIO QUALITY AND POLK'S EXCELLENT SOUND REPRODUCTION with these timbre-matched discrete recessed speakers that elevate the sound quality, DELIVERING DEPTH OF MUSIC AND CLEAR, CRISP DIALOGUE
• Pair with our RTI Series speakers for seamless imaging or ADD TO YOUR EXISTING HOME THEATER SYSTEM or build your own Polk collection, and enjoy the SAME GREAT POLK SURROUND SOUND EVERYWHERE
• EXPERIENCE MORE BALANCED & LIFELIKE SOUND – Features an 8” dynamic-balance woofer & a 1” tweeter for adding more depth & detail to your music. Mineral-filled polymer cone & strong composite driver baskets create wider dispersion for EVEN-SOUND COVERAGE
• THE RUBBER SEAL DRIVES better response and PREVENTS MOISTURE ACCESS, a key feature for USE IN A BATHROOM, KITCHEN, SAUNA AND COVERED PORCH
• OUT OF THE BOX & RECESSED INTO THE WALL - no mess, no extra assembly - in 3 simple steps QUICKLY & EASILY INSTALL these speakers. Leave the paintable aluminum grilles as is or spray paint to MATCH YOUR EXISTING INTERIOR and virtually make them disappear
• Polk's UNWAVERING COMMITMENT, RELIABILITY, AND CRAFTSMANSHIP, has made it one of the most trusted names in home audio speakers and entertainment systems. They bring out the BEST IN TECHNOLOGY, so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART!

User questions & answers

Question:	can I paint it with my wall color
Answer:	This is a good question to ask Polk direct. When you receive this system out of the box, It's already program from the factory to react within it'self. In the instruction that comes with the system it does mention these codes can be change. Be safe and ask the pro's who design the system.
Question:	I need them for a concrete wall. is their any problem ? what's the depth of the hole I need to make
Answer:	I would think so, go to the Polk website and contact them.
Question:	Do you need a subwoofer for these speakers? Or do they sound ok without it
Answer:	After struggling and struggling with this same feature (I live in a college town. The college kids were using the unsecured hotspot created by the magnifi to make wifi telephone calls, thus blocking my phone and using up all my router bandwidth ) I found a solution. I unplugged the magnifi, put it in a box, and threw it in the town dump. I then went out and bought a new sound bar that cost 1/2 as much as the Polk that could only be updated when I specifically wanted to update it. I found this to be the perfect solution to a problem the polk WILL NOT fix, WILL NOT assist the customer when asked for help either thru their customer support or their technical support. Now I go around telling anyone who will listen the absolute truth about the lack of support I got from polk. You can do this also.
Question:	what is the depth needed in the wall
Answer:	Can I hook a sound bar directly to my tv

Product features

Low Profile Performance

Paintable grilles let you build them in, and then forget all about them; RCi Series speakers practically disappear into any room.

Virtual Enclosure

With infinite baffle tuning, RCi speakers utilize the “virtual enclosure” of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.

Timbre-Matching

RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.

Streamlined Design

Klippel motor optimization uses laser measurement technology to ensure a smooth excursion path at either end of the volume spectrum for uniform performance at both low and high volumes.

Superior Components

Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms, transitional spaces or even under eaves or in the ceiling of an enclosed porch. (RCi series are not suitable for exposed outdoor use. For outdoor speaker fun, use our Atrium Series.)

Simple Setup

Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.

• Advanced 5.0 BLUETOOTH Technology：Independent Bluetooth Digital Amplifier box bring you stereo sound effects. allows for wireless music streaming ability and doubles as a sound processing digital amplifier. You will be able to stream audio from all of your favorite devices (like smartphones, tablets and computers).
• 300-Watt Peak Power:300 Watts Total Power Output per Pair (150 Watts Each Speaker)
• Flush Mount Desgin：Compact flush mount design for simple easy installation in-wall / in-ceiling , or pre-cut speaker openings, for in home use, office, professional, or custom audio applications on any flat surface.
• Mounts on Ceilings:Total Speakers Diameter 8.46 Inches (21.5 CM),Cut Out Diameter 7.3 Inches(18.5 CM),Speakers Depth: 4.33 Inches (11 CM)
• What's in the box:5.25" speakers x 2 , Speaker Connection Wires x 2,Bluetooth Amplifier Box x 1,Power adapater X 1.

User questions & answers

Question:	Can't connect to alexa. Tried to connect but never asked up. Works with my android
Answer:	Before you connect your Echo device to Bluetooth speakers, make sure that you do the following: -Position your Echo and Bluetooth speakers at least 3 feet apart. -Don’t forget to turn on the Bluetooth speakers for pairing mode. -Disconnect the Bluetooth device you want to pair Alexa with. Your device might not be able to recognize a device that is already connected to another device.
Question:	Where does the power source connect vs the Bluetooth? My orginal Powersource is in a different room
Answer:	you can use an electrical extension or use a longer speaker cable because the bluetooth has a 5 foot power cord
Question:	This is advertised as 5.25" speaker set, but the cut out is shown to be 7.3 inches. Are these dimensions correct
Answer:	The inner speaker is 5.25 inch.
Question:	Can you hardwire a direct line from a audio source to the speakers and still use the Bluetooth amplifier as an additional hookup to speakers
Answer:	It does have a aux 3.5mm jack FLUSH next to tge power. Overall the speaker is good, the bluetooth adaptor on the other hand is VERY POOR design.

Product features

Advanced 5.0 BLUETOOTH technology

Independent Bluetooth Digital Amplifier box bring you stereo sound effects. allows for wireless music streaming ability and doubles as a sound processing digital amplifier. You will be able to stream audio from all of your favorite devices (like smartphones, tablets and computers).

Cut out Size Template For easy Installation

The cut out diameter is 5.7 inches with a mounting depth of 2.6 inches

ABS Construction , Perfect for customer installation & application

Great Audio Sound Performance

The HCS-528BT has an impressive 300 Watt Rated peak power .( Each speaker is 150 watt) . With 89dB Sensitivity and 8Ohm Impedance . The Herdio In-Wall/Ceiling Bluetooth Speaker Kit delivers effortless stereo sound to any room in your home or office.The Volume can go up very high with no distortion. It has a frequency response form 60Hz to 20kHz.Clarity is good and audio sounds clear and crisp.Each speaker features a high-compliance polymer tweeter that delivers full, rich sound without cluttering floor space.

Removable and Paintable grille

It’s face is covered with a removable grille. The back portion is open for easy installation. the powder-coated aluminum grille is also moisture -resistant. So it can be installed in such environments like kitchen, bathroom etc. You can also paint the grille to match the decoration of your room .

Product description

This 5.1-channel home theater system comes with an AV receiver and a speaker package (one center channel, two front channel and two surround speakers, plus a subwoofer), to deliver a clear, balanced sound for any listening experience. Enjoy your favorite movies, TV shows, music and video games, all with one, easy system.

Providing complete compatibility with the latest HDMI standards, the AV receiver in this package delivers transmission of 4K video at 60 frames/second pass-through. It also supports HDR (High Dynamic Range) Video including Dolby Vision and Hybrid Log-Gamma which provides incredible contrast, smooth tone and rich, bright colors—giving you full, high-definition enjoyment with an exceptionally realistic and natural picture quality.

• Your purchase includes: 1 AV receiver, 5 speakers, 1 Sub-Woofer and Speaker wire
• Dimensions: AV Receiver – 17” W x 6” H x 12” D | Four Speakers (each) – 4” W x 6” H x 4” D | Center speaker – 10” W x 4” H x 4” D | Subwoofer – 11” W x 11” H x 13” D
• Technical specs: HDMI – 4 | Standby Power Consumption – ≤ 0.2 W | Frequency Response – 28Hz/25kHz
• Bluetooth for streaming all your favorite music and podcasts. No wireless functionality
• Easy setup with Yamaha YPAO room optimization and flexible speaker placement options, including virtual cinema front

User questions & answers

Question:	How do you raise the volume for output sent to bluetooth headphones
Answer:	through the Yamaha or Bluetooth volume controls. Works same as a car
Question:	How does this differ from the 4930? The specs seem identical
Answer:	I believe it's the 4K passthrough on the HDMI. Plus a bigger subwoofer.
Question:	I get netflix picture. But the sound is my local cable channel still why
Answer:	Use the HDMI inputs on the receiver for both the DVR as well as your streaming device. If you're using a smart TV instead of a streaming device, then use the HDMI input on the TV and use optical or the RCA outputs on the TV to the receiver. Otherwise, it's your TV that has an issue.
Question:	Are the speakers wired or wireless
Answer:	Wired and the wire is included.

Product features

YHT-4950U 5.1-channel Home Theater System

Bring enveloping, cinematic surround sound to your living room. This home-theater-in-a-box system combines a powerful AV receiver with five speakers, a subwoofer and speaker wire in a single package.

Product description

Acoustic Audio by Goldwood R191 Flush Mount In Ceiling 5 Speaker Set

- Center Channel with Front and Rear, Right and Left home theater configuration

- Wide Sound Dispersion Designed Speakers easily integrate with new and existing audio systems

- Traditional Passive speaker design, simply drive power from your home audio receiver or amp

- Flush Mount low profile housings install easy with unique Pressure Lock Mounting System

- Full Range sound coverage with 2-way woofer and tweeter configuration

- 5.25" High Rigidity Polypropylene cone woofers with butyl rubber surrounds

- 12mm Soft Dome tweeters

- Frequency response is 45Hz-22 kHz with 95dB at 8ohm

- Pressure Lock Mounting System clamps tight to drywall with No Hardware Needed

- Fits round speaker hole size of 6.625" with a mounting depth of 3"

- Overall speaker size of 7.625" with raw wire clamp or solder connections

- Durable ABS Housings and Removable Grills can be painted to match your decor



System Requirements

- Any home audio receiver or amplifier with raw speaker wire outputs

- Your receiver power should be no less than 10 and no more than 200 watts per channel

- CL3 Rated in wall certified raw speaker wire to connect your receiver to the speakers



Applications

- Home Theater Surround Sound Systems

- Whole House Audio Systems

- Business or Retail Installations



What's in the box

- 5 Flush Mount Passive Speakers with Removable Grills

- Cut-Out Templates

- Instruction Manual

• FLUSH MOUNT IN CEILING SPEAKERS - Wide sound dispersion designed speakers easily integrate with new and existing audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp
• FULL RANGE 2-WAY SOUND - 5.25" High Rigidity Polypropylene cone woofers with butyl rubber surrounds, 12mm soft dome tweeters, frequency response is 45Hz-22 kHz with 95dB at 8ohm
• EASY TO INSTALL - Pressure lock mounting system clamps tight to drywall, fits round speaker hole size of 6.625" with a mounting depth of 3", overall size of 7.625" with raw wire clamp or solder connections, durable ABS housings and grills can be painted to match your decor
• SYSTEM REQUIREMENTS - Any home audio receiver or amp with raw speaker wire outputs, power from your amp should be no less than 10 and no more than 200 watts per channel, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers
• WHAT'S IN THE BOX - 5 Acoustic Audio by Goldwood R191 speakers, removeable grills, cut-out templates, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations

User questions & answers

Question:	do these sound good loud? Or will you get some distortion
Answer:	The sound is great there is no distortion.
Question:	Has anyone mounted these in both wall and ceiling, what are the differences on install? someone stated they were not for wall installs
Answer:	There is no difference in for the install if you mount speakers in the wall or ceiling.
Question:	Can these mount to acoustical/fake ceiling
Answer:	I think so. They mount with a screw and clamp. The screw is accessible behind the removable front grill. The speaker comes with a template so you know what size to cut out in the wall or ceiling. After you insert the speaker into the recess, as you turn the screw, it tightens the clamp onto drywall, securing it in place. Although it is designed for drywall, I think it will work on anything with approximately the same thickness (~3/4 inch thick).
Question:	Which amp will connect all 5 speakers? Can i connect to Pyle wall mount receiver instead of an amp, and connect aux cord to play music from phone
Answer:	I would recommend a 5.1 home audio receiver.

Product description

Add deep bass excitement and extended dynamic thrills to your music or movie sound system with the easy-to-connect and easy-to-use PSW 10. Its 10" Dynamic Balance composite cone driver and non-resonant enclosure produces deep, smooth response with superior detail and accuracy, while limiting distortion. The sub is powered by a high-current amplifier producing 50 Watts RMS/100 Watts dynamic power. A rotary volume control adjusts the volume of the subwoofer relative to the other speakers in the system and the unit offers a continuously variable low-pass filter, adjustable from 80-160 Hz. Easily accessible, professional-grade line- and speaker-level inputs, and speaker level outputs, allow easy connection to any system.

• POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
• LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
• Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt rms amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
• EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
• A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete

User questions & answers

Question:	What in your opinion is the best power setting for normal use, "on" or "auto" for this unit
Answer:	I would say depends if you use the item everyday/constantly as your sound for your surround. Or if you use surround/theater occasionally. If the latter I would use `on/off` , if you use it often or primarily the auto would be the way to go in my opinion. Plus is the sub easy to get to? Auto is great if its behind furniture or out of reach,etc.
Question:	Does this speaker have a volume control? Thanks
Answer:	Just to clarify something a previous reviewer stated: "Note: If you are using a Sub out/LFE connection from your receiver turn the Low Pass all the way up. " This does not apply to receivers with which you can specify the low-pass cutover frequency. For example, my modest Onkyo receiver has cutover settings of 80/100/120 HZ for the LFE/Sub output. If you have this option, you should consult your main speaker's manual for suggested low-pass settings or simply tune them by ear. For my setup, 120 HZ was both the recommended and best-sounding cutover frequency. 160 HZ was a little muddy :)
Question:	Can this sub be added to a Vizio 2.0 sound bar, for small to medium-sized HDTV's? If not, what should I get? For TV/Games/Music
Answer:	Like John, I too have a Vizio 2.0 sound bar and this pairs very well. I have a small theater room (10 x 20) and this one 10" fills the room. This sub is the best bang for the buck you can get.
Question:	Do I need a Y-adpater? A sound tech told me one sub wire would do the trick and just plug it into the L and ignore the R. Is this true
Answer:	Initially, used a one wire connection. Sounded OK, but .... Got a "Y" connector, attached at the rear of the amp, ran L & R wires to the PSW10: sounds amazing now and very adjustable. Need to get the PSW12 to get a one wire connection. Am very satisfied with this sub and would recommend it. Used in a 12' X 20' room, front/back/center and now the sub. Tom

Product features

Single 10" Subwoofer

• PSW enclosures are designed and engineered for perfect volume, minutely tuned for distortion-free low frequencies, and internally braced and damped to eliminate internal standing waves and other performance-robbing resonances.
• This unique configuration uses a specially tuned and directed port to more efficiently produce maximum bass impact.

100 Watts

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more "escaped washing machine" syndrome.

Laser-Based Klippel Measurement Technology

Our state-of-the-art Klippel distortion analyzer optimizes the woofer's motor structure, voice coil alignment and suspension for smooth, unimpeded movement over a broad spectrum of the lower frequencies to ensure the best, most efficient performance even at extreme listening levels.

Resonance-Free Dynamic Balance Driver Materials

PSW Series subwoofers outperform the competition with durable, resonance-free Dynamic Balance driver materials that stay stiff and move fast. You experience deep, musical low frequencies and thrilling effects with superior system blending.

Easy Connection to Any System

Inputs

• Audio Inputs: Stereo Line Level - RCA, Pair (L/R) Analog RCA.
• Speaker Inputs: Pair of Spring Terminals.

Outputs:

• Audio Outputs & Speaker Outputs.
• Pair of Spring Terminals.

Unique Design Keeps Your Subwoofer Stable

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more 'escaped washing machine' syndrome.

Product description

Klipsch black reference theater pack we've taken the premium materials and acoustic technology of our revered reference Series and designed a beautiful 5.1 surround sound system to pair with your favorite AV receiver. Complete with a wireless subwoofer, The reference theater pack brings the Klipsch cinematic sound into your home with an incredibly minimal footprint. Cinematic performance The reference theater pack delivers superior Acoustic performance by leveraging injection molded graphite (IMG) woofers. These exceptionally lightweight cones are extremely rigid – providing remarkable low frequency response, with minimal cone breakup and distortion. A linear travel Suspension (LTS) tweeter minimizes distortion for enhanced, detailed performance. Lts tweeters have been a hallmark of our reference Series product lines, making it a core component of one of the best speakers in the world. Horn-loaded power Our exclusive tractrix Horn technology and aluminum tweeters deliver the most impressive high-end response and greater extension, enhanced Imaging and powerful dynamics. This creates the cleanest, most natural sound possible. Wireless, robust bass The down-firing wireless subwoofer is designed to deliver room-filling low frequencies without requiring too much floor space. The 2.4GHz connectivity allows for premium, CD-quality sound anywhere in the room. Simply connect the compact, pre-paired TRANSMITTER to the subwoofer or LFE out on your receiver and place the subwoofer where it sounds and fits best in your room. The built-in all-digital subwoofer amplifier delivers ample power with high efficiency and true-to-source accuracy. Flexible system placement to complement the easy placement of the wireless subwoofer, each satellite speaker has a keyhole mount and a ¼” x 20 threaded insert (the center channel has dual keyhole/ inserts) for maximum mounting flexibility.

• The Klipsch reference theater pack delivers a superior acoustic performance while keeping an incredibly minimal footprint
• Klipsch's exclusive Tractrix Horn technology and aluminum Tweeters deliver the cleanest, most natural sound possible The down-firing wireless subwoofer is designed to deliver room-filling low frequencies without requiring too much floor space
• To complement the easy placement of the wireless subwoofer, each satellite speaker has a keyhole mount and a threaded insert for maximum mounting flexibility
• The reference theater pack brings the Klipsch cinematic sound into your home with an incredibly minimal footprint

User questions & answers

Question:	How much do these speakers weigh
Answer:	Each speaker = About 1 to 2 lbs Sub Woofer = About 10 lbs
Question:	Can these be connected by banana plugs? Sometimes there are little plastic caps at ends of posts but I don’t see anything removable on these
Answer:	These smaller speakers do not have banana plug connector receptacles. The binding posts are the spring loaded type for bare speaker wire.
Question:	Have pair of floor-standing speakers, can i use these speakers to make my system 7.1? do i need something different for the second set of rear speake
Answer:	Yes, that would work great. Use the satellites for side surrounds and rear. I would also consider replacing the center channel with a larger speaker down the road because there is not much in the mid range and lower. And you want the lower ranges coming from the center speaker and not the subwoofer for directionality.
Question:	How many watts can they take also what ohm are they
Answer:	Thanks very much for your question. The power handling is rated as Satellite: 50W (200 watts peak) and Center: 75W (300 watts peak), all are 8 ohm speakers. World Wide Stereo is 38 years old and a proud, authorized Klipsch dealer.

Product features

Cinematic Performance

The Reference Theater Pack delivers superior acoustic performance by leveraging Injection Molded Graphite (IMG) woofers. These exceptionally lightweight cones are extremely rigid – providing remarkable low frequency response, with minimal cone breakup and distortion. A Linear Travel Suspension (LTS) tweeter minimizes distortion for enhanced, detailed performance. LTS tweeters have been a hallmark of our Reference series product lines, making it a core component ofone of the best speakers in the world.

Horn-Loaded Power

Our exclusive Tractrix Horn Technology and aluminum tweeters deliver the most impressive high-end response and greater extension, enhanced imaging and powerful dynamics. This creates the cleanest, most natural sound possible.

Wireless, Robust Bass

The down-firing wireless subwoofer is designed to deliver room-filling low frequencies without requiring too much floorspace. The 2.4GHz connectivity allows for premium, CD-quality sound anywhere in the room. Simply connect the compact, pre-paired transmitter to the subwoofer or LFE out on your receiver and place the subwoofer where it sounds and fits best in your room. The built-in all-digital subwoofer amplifier delivers ample power with high efficiency and true-to-source accuracy.

Flexible System Placement

To complement the easy placement of the wireless subwoofer, each satellite speaker has a keyhole mount and a ¼” x 20 threaded insert (the center channel has dual keyhole / inserts) for maximum mounting flexibility.

Product description

Dynamat 50306

• Reduce Noise Through Floors
• Diffuse Back-wave Distortion
• Provide Moisture Barrier
• Improve Sound Quality

User questions & answers

Question:	I'm not concerned about noise reduction, but providing additional bass to the in ceiling speaker. It's lack of a backing box is noticeable. Opinions
Answer:	No. You will need a phono preamp, either external or built into a preamp / receiver. There are two reasons: RIAA EQ and preamp gain. A record is pre-emphasized with an equalization curve that emphasizes high frequencies, and the phono preamp will need the reverse curve to make it sound right. The other reason is that the hottest cartridges typically put out only .005 volts, and standard line-level is somewhere around 2V, which means you need a gain of about 40-60 decibels before the signal is at the same level as a typical CD player.
Question:	What is the internal cubic foot volume of the boxes
Answer:	Switching on and off, changing replay speed To play records at 33 r.p.m. press the ON/OFF switch (19) to starts the motor. Pressing the ON/OFF switch two times selects 45 r.p.m.. The selected speed is shown respectively by the flashing LED. When the platter has attained full speed the LEDs stop flashing. To be able to play 78 r.p.m. the flat drive belt has to be removed and the round drive belt has to be fitted around the hub (4) and the larger diameter part of the motor pulley (2). To do so the platter (5) has to be removed. After the round drive belt has been fitted, pressing the ON/OFF switch two times selects 78 r.p.m.. When full speed is attained the LED 45 stops flashing. A long (more than three seconds) press on the ON/OFF switch stops the motor.
Question:	Can you squeeze the rubber box to fit through the speakers’ 8 inch opening without needing to enlarge the hole
Answer:	Sure you should. The dust cover is just that a dust cover to be used when the table is not being used. Some audiophiles go to the extreme and actually remove the entire dust cover while it's in use although I think that's a bit of over kill and keeping the dust cover elevated up at it's highest angle is usually good enough to stop any added vibrations. I personally would not ever put the dust cover down while playing vinyl since after all this is a completely manual table and you need to be able to get to it at the end of a record.They do sell a $50 device that can raise the tone arm at the end of a record to eliminate the constant need to be in the same room. You will also benefit using the Project 2 LB spindle weight that helps eliminate warp issues and allows for better vinyl record tracking.One way to test for vinyl slippage is to place a thin piece of painters tape on the vinyl record and on the exact same spot on the platters matt. Then play a record and see if the two pieces of tape are still aligned? If not you will really benefit from the record clamp that Project sells at $95. It's a nice one and works without tables with threaded center spindles.Hope this helped you out as I was given the same advice. Any vinyl slippage will basically cause excess wear and thus the clamps are not just for looks and warp issues alone.Take care. Sincerely, Steven Level
Question:	I would like to order more of these rubber in-ceiling speaker enclosures, when will/do you restock them
Answer:	Yes. A dust cover is included.