12 best receiver for bookshelf speakers

• IMPORTANT: Singing Wood T25 is a passive speaker which needs to be used with an amplifier or receiver. Speaker cables included.
• 【CLASSIC WOODEN ENCLOSURE】 Stylish design speakers made with audio grade MDF wood to reduce cabinet resonance, featuring pre-installed wall mount brackets for easy home theater setup - perfect for either front main or home theater surround speakers.
• 【4" BASS DRIVERS】4 inch full range bass driver for well balanced natural sound and powerful deep bass. 6 ohm impedance.
• 【SILK DOME TWEETERS】High quality 0.75" (3/4 inch) silk dome tweeters provide accurate high frequency response and reproduces treble in every detail.
• 【SINGING WOOD ADVANTAGE】America's leading audio brand based in California, 24 months warranty and easy to reach after-sales customer support team always be with you when you are in need. We guarantee high quality parts and labor warranty service for two years with lifetime technical support.

Product features

T25 Bookshelf Speakers are wall mountable and can be used as FRONT, LEFT-RIGHT SETUP, SURROUNDS OR AS REAR SPEAKERS.

Product description

Edifier’s First Passive Bookshelf Speakers

Be a part of a first for Edifier. The P12 is a set of passive bookshelf speakers. Passive bookshelf speakers give you the freedom to amplify and press the boundaries of sound. An external amplifier or receiver is required.

Perfect for Home Theaters

Complete your home theater with Edifier’s passive speakers. The P12 features a wall-mount bracket built-into both speakers allowing for placement for rear speakers. The P12 are also a great choice for front or centered speakers.

Wood Veneer MDF Enclosure

The P12 passive speaker uses MDF as the wooden enclosure for the drivers and tweeters. The MDF enclosure reduces cabinet resonance. The P12 has a wood veneer finish perfect for classic setups to provide a vintage aesthetic.

Silk Dome Tweeters and Bass Drivers

The P12 uses an improved ¾ - inch silk dome tweeter for allowing for more room in the high end sound. For bass a 4-inch driver used for low frequency sound. Each speaker also has an improved bass reflex port that adds emphasis to the bass sound.

• RECEIVER OR AMPLIFIER REQUIRED – Connect an amplifier or receiver to power these speakers to your taste. Speaker wires included.
• 4-INCH BASS DRIVERS – Balanced natural sound with the 4-inch driver and a bass reflex port to enhance bass. 6 ohm impedance
• WALL-MOUNT BRACKET BUILT-IN – Hang these speakers on the wall as rear surround speakers for your home theater
• SILK DOME TWEETERS – High quality 19mm (3/4 inch) tweeters reproduces treble in every detail
• 2 YEAR WARRANTY - Guaranteed high quality and reliability with hassle-free parts and labor warranty for two years in USA and Canada.

User questions & answers

Question:	Does it really work
Answer:	The description says “imported.” I assume they are made in China.
Question:	do these speakers have a better bass response compared to Polk T
Answer:	Medium, if you want room to grow
Question:	Would these speakers work for an onkyo model a-7 amplifier? i bought one from a family member and want to restore it but i have no passive speakers to test it with. the a-7 has a power output of: 68 watts per channel into 8ω (stereo), according to the manual i could find online
Answer:	Little girls is from a 10.5 to a 4. My daughter is 7 and wears a 12.5 so we got little girls. My son is 8 and wears a 2.5 so I would get him the little size as well. If your daughters shoe size is bigger than a size 4 I would buy the big girls. If she's between a 10.5 and 4 get her the little girls. I'm a dad as well lol. Not single but I do the shopping lol
Question:	product dimensions
Answer:	10.5-4 is what I bought. My girls feet sizes in shoes are 13 and 2. Fits both of them. They are thick also. I could even wear them. I wear a 7.5 in women's shoes and 6 in juniors. They stretch nicely and very soft. I love them.

Product features

Edifier’s First Passive Bookshelf Speakers

Be a part of a first for Edifier. The P12 is a set of passive bookshelf speakers that give you the freedom to amplify and press the boundaries of sound. * An external amplifier or receiver is required.

Solid Built MDF Enclosure

The P12 passive speakers use market proven MDF enclosures for the classic designed cabinets. These enclosures are engineered to reduce cabinet resonance effectively. The entire speakers are finished in elegant wood accent that fit both contemporary decor as well as setups with a vintage vibe.

Silk Dome Tweeters and 4’ Bass Drivers

The P12 uses a ¾ - inch silk dome tweeter allowing for more room at the high-end. For bass, a 4-inch driver is used for smooth, rich, low frequency sound. Each speaker also has a bass reflex port that adds emphasis to the woofer.

Versatile Placement Options

The P12 is designed to fit perfectly on shelfs, desktops and the walls. Complete your home theater with Edifier’s passive speakers. The P12 features a wall-mount bracket built-into each speaker allowing for use as rear channel or surround speakers.

Product description

The Micca MB42 bookshelf speakers render an amazing listening experience while taking up very little in space or budget. Handsomely styled with classic appearance and natural textures, the MB42 is easy to place and blends into any room or decor. Its well balanced sound signature and vocal clarity are a great fit with a wide range of usage scenarios, from background music to home theater. The MB42 design starts with carefully picked drivers that mesh perfectly in the critical crossover overlap region. It incorporates a balanced woven carbon fiber woofer for enhanced transient and impactful bass, and a high performance silk dome tweeter for smooth treble and accurate imaging. The drivers are housed in a ported enclosure that delivers extended bass response with low distortion. Full size 5-way binding posts provide the full complement of speaker wire connectivity options. Hex screws are used throughout for assembly. Hearing is believing. Discover how good an affordable pair of speakers can be by trying them risk free in your home with your music. Place the MB42 along a wall or near a corner of the room for best results. They can be used on desks, book/wall shelves, or on speaker stands. If you are not absolutely delighted with the MB42 performance, simply Return them for a refund. Micca MB42 specifications: - woofer: 4" carbon fiber cone with rubber surround - tweeter: 0. 75" silk dome - enclosure: ported enclosure - frequency response: 60Hz-20kHz - impedance: 4-8 ohms - Sensitivity: 85dB 1W/1M - power handling: 75 watts (each) - dimensions: 9. 5" (H) x 5. 8" (w) x 6. 5" (D)

• IMPORTANT: The MB42 is a passive speaker and needs to be used with an amplifier or receiver. IT CANNOT BE CONNECTED DIRECTLY TO A TURNTABLE!
• Balanced woven carbon fiber woofer for enhanced transient and impactful bass. High performance silk dome tweeter for smooth treble and accurate imaging
• Ported enclosure delivers extended bass response with low distortion
• Neutral and accurate sound signature with excellent vocal clarity
• Compact classic design is easy to place and disappears into any room or decor

User questions & answers

Question:	Anyone have experience using these as front speakers in a surround sound setup? Would they be loud enough with a Yamaha receiver for music and movies
Answer:	Hi, We recommend that you use an amp that has at least 15 watts of power per channel. There are many compact Class-D amplifiers on the market that offers 30 to 50 watts of power and would work very well with the BS5 speakers.
Question:	When will these become available again? Or are they discontinued
Answer:	Thanks for your inquiry. Since the length of speaker wire needed varies greatly depending on each setup, speaker wire is not included in order to reduce waste. We keep the BS5 affordable so that you can purchase speaker wires in the necessary length and thickness that best fit your needs. Kind regards
Question:	Is there a noticeable difference between the 42 and 42X
Answer:	Hi, The dispersion of the BS5 speakers are similar to other bookshelf speakers with a similar box design and driver arrangement. They provide full range frequency response within about a 60-degree window. At wider angles, the high frequency will fall off more noticeably, same as other bookshelf speakers. However, the 60-degree listening window should cover the listening area of most home theater systems. To give you some idea of this, 10 feet away from the speaker, a 60 degree listening window covers a listening position span of 12 feet. In comparison, a standard 3-person sofa has a seating surface that is about 9 feet wide.
Question:	Just to verify, this product comes as a PAIR, correct? As in, if I make one purchase, I'll receive two speakers? Just want to make sure
Answer:	Sorry, this speaker cannot be connected directly to a computer or TV. It requires an amplifier to function. The amplifier you purchase may have different inputs, allowing you to connect to a computer and TV at the same time. If you have any questions or need technical assistance when using this item, please just contact us for help. Regards

Product features

Micca MB42 Bookshelf Speakers

The Micca MB42 bookshelf speakers render an amazing listening experience while taking up very little in space or budget. Handsomely styled with classic appearance and natural textures, the MB42 is easy to place and blends into any room or decor. Its well balanced sound signature and vocal clarity are a great fit with a wide range of usage scenarios, from background music to home theater.

Amplifier Required!

An amplifier is required for use with this speaker and is not included. Use your existing amplifier, home theater receiver, or choose the Micca OriGain compact amplifier.

Silk Dome Tweeter

High performance 0.75-inch silk dome tweeter. Well integrated driver output matching for smooth treble, wide dispersion, and accurate imaging.

Carbon Fiber Woofer

4-Inch balanced woven carbon fiber woofer with rubber surround for enhanced transients. Matched ported enclosure tuning for deep and rich bass output.

Classic Good Looks

Simple yet sophisticated design with rounded corners, soft bevels, and classic cloth grill design for a timeless look. The MB42 sounds good and looks good.

Product description

A truly powerful, small Form-Factor music Monster packed with Kirsch acoustics with integrated power and Bluetooth wireless technology. With an integrated phono pre-amp, Bluetooth wireless technology, digital optical, analog RCA and USB inputs, your R-41PM is the best performing, most versatile monitor on the planet. As the human ear perceives frequencies differently with variations in output, The R-41PM will dynamically match the ear's ability to hear lower frequencies. Typically, only available with audio/video receivers, dynamic volume is a first for Kirsch powered monitors. What you get is powerful bass whether the listening Volume is low, cranked up or somewhere in between. Forget the expense, clutter and hassle of an external a/V receiver. The R-41PM monitors incorporate individual ultra-low noise amplifiers custom designed to maximize system performance and eliminate the need for external amplification. Allows easy access to system Features like dedicated source selection, track controls, and play/pause. Add a subwoofer to enhance for even more bass.

• Powered monitor
• Bluetooth wireless technology
• Phono/line analog (with switch and ground screw terminal)
• 3.5mm analog Mini jack
• USB digital

User questions & answers

Question:	Class 2 bluetooth has a range of about 10 meters. class 1 bluetooth has a range of about 100 meters. which does the r-41pm have
Answer:	Neither did i.
Question:	Are these speakers sold in pairs or one at a time
Answer:	Yes it fits almost any chair, airplane seat, car seat, or office chair. If you also want extra support you can try our bombshell back rest pillow for extra comfort. Thank you for your interest in our product. Bombshellbootypillow.com
Question:	Can these connect to the nintendo switch? it has a 3.5mm jack out. thanks
Answer:	All the pillows come with a discreet cover bag that is already on the pillow. If you look to the left of the pillow you will see the carry handle. To wash the cover bag you can simply use the zipper on the back of the pillow to remove it.
Question:	Can I get a sub to go with these without buying a receiver
Answer:	BBL Pillow measurements are 16.5x7.4x4.3 inches

Product features

NO RECEIVER REQUIRED

Klipsch Reference powered speakers deliver room-filling sound without taking up much space thanks to a built-in amplifier that is custom-engineered for these high-performance speakers, maximizing output and sound quality.

PLAYS WELL WITH OTHERS

Whether you connecting to a turntable, television, computer, cell phone, whatever - these powered speakers work with anything.

Equipped with an integrated phono pre-amp, Bluetooth wireless technology, digital optical, analog RCA and USB inputs, making these powered speakers your new best friend.

DYNAMIC BASS EQ

As the human ear perceives frequencies differently with variations in output, Klipsch Reference powered speakers will dynamically match the ear’s ability to hear lower frequencies.

LINEAR TRAVEL SUSPENSION TWEETER WITH KAPTON SUSPENSION

Klipsch exclusive Linear Travel Suspension (LTS) aluminum tweeter minimizes distortion for enhanced, detailed performances. Using Kapton, an extremely light and rigid material, in the tweeter suspension provides high efficiency and improves resolution and detail. LTS tweeters are a hallmark of Klipsch speakers, making them some of the best speakers in the world.

Product description

The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last. Features: Harmonic Distortion: 0.3% 2 x 120 Watt RMS at four Ohms Blue LED Output Level Display Frequency Response: 20 Hz-20 kHz Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches) Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz) Dimensions: 8.27’’ x 2.72’’ x 5.39’’ inches.

From the Manufacturer

• 2X120 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your PA & home theater acoustic surround sound system. Gives you 2x120 watts power which can be used for multi speakers w/ 4 8 ohms impedance, enjoy high quality music & movies
• MULTIPLE INPUTS: This personal portable digital amp box supports various external sources 3 3.5mm AUX for tuner, CD DVD, MP3, computer, iPad, iPhone & cell phone, 1/4" mic in & 1/4" headphone jack input. Also features a REC RCA output for recording
• PAGER/MIXING MODE: The professional integrated stereo receiver features pager & mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting & meetings. Switch to mixing mode for a fun karaoke session. Dimensions (W x H x D): 8.2x 6.6x 2.8 inches
• USB 2.0 INPUT: It features a USB input to support flash drives or similar USB devices w/ LED indicator beside the port. It allows you to play your favorite audio files from your computer's media library when you connect it directly to the amplifier. Rated power input 750mV
• EQ CONTROLS: The improved compact bookshelf sound amplifier features crisp & responsive buttons for power switch, MP3 controls previous, next, play/pause & rotary knob controls for input select, MIC, master, balance, bass & treble volume controls

User questions & answers

Question:	is it safe to hook up the sony ss-b1000 5-1/4 inch book shelfspeakers to this amp
Answer:	Yes, assuming you hook them up correctly!. I have some 70's vintage Technics speakers running on it just fine.
Question:	I hear "static" at low volume (definitely not the speskers). Any suggestions
Answer:	Disconnect your input source to the amplifier. If the noise goes away, then it's coming from the source and not the amplifier. If the noise continues, disconnect all inputs. If you hear the noise, the problem is likely the amplifier.
Question:	is there a way to hook up to a new flat screen tv to run a set of external speakers
Answer:	You asked this a while ago, so I'm guessing you've found out by now. This receiver does not have HDMI or Optical inputs, only RCA inputs. Most new TVs no longer come with RCA out, but many have a headphone output. If your TV has a headphone output, you can get a headphone to RCA adapter and use that to connect to this receiver.
Question:	Can I run an RCA cord from my TV to this amp? The input/output schematic does not show a TV
Answer:	All 3 inputs are RCA, just pick one :) Just because it says "CD" or "Aux" doesn't specifically mean you must use that device, RCA is RCA. However, I wouldn't recommend purchasing it. Mine died (non smoking house, didn't overheat or push it too far) within 1 month of use. I decided to go with the Dayton Audio APA150, which has been a workhorse since day 1 with no issues and much better consumer ratings than this Pyle of junk. Happy hunting.

Product description

These are the perfect speakers for any occasion or application. They were designed with durability in mind, so there's no need to worry about rust or wear-and-tear. They make great additions to any surround sound home theater, will fit onto any bookshelf, can be used with any stereo system and are great to use In bathrooms and kitchens. Each speaker can handle 200 watts of power (100W RMS), and has a full range sound and functionality. Included mounting brackets allows hassle-free installation in any location.

• MOUNTABLE INDOOR WIRED SPEAKERS - Traditional passive speaker design, simply drive power from your amplifier or receiver
• HIGH QUALITY - Full Range sound coverage with 2.5" Polypropylene woofers, frequency response is 150Hz-20 kHz with 88dB at 8ohm
• DURABLE AND MOUNTABLE - Black ABS sealed cabinets with spring loaded raw wire connectors and mounting brackets. Big sound from a compact speaker size of (H x W X D) 3.5" x 3.5" x 4.5" each
• SYSTEM REQUIREMENTS - Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 20 and no more than 200 watts per channel, CL3 or raw speaker wire to connect your amp to the speakers
• WHAT'S IN THE BOX - 2 Acoustic Audio by Goldwood AA321B speakers, mounting brackets with hardware, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations, patios, decks, pool and spa settings

User questions & answers

Question:	Can i use 4 of these and the matching center with 2 psw505 for a decent HT? 14x14 room
Answer:	Definitely yes, I have a Polk RM6750 subwoofer and 2 of this speakers with the matching center and they sound clear as water. Besides you can always lower your subs volume if its too much. Also remember the power your amp have is important, I'm using a Sony STR-DE335 amplifier which sends 100 watts per channel at 6 ohms and nothing has gone wrong yet. So far I have played music, movies and the morning news and I'm always happy about the clarity and loudness on only a 3.1 system. My guess is yours is going to sound much better with the 5.2 you are building. Nice pick and good luck with your shopping.
Question:	Do these have a screw hole in the back for mounting on a speaker stand
Answer:	No. They come with a mount that slides into a dove tail slot on the back of the speaker. The mount has limited movement. No 90 degree angles.
Question:	can these speakers work with the audio-techica at-lp60 usb turntable
Answer:	Answering late...for others needing help - you need active speakers to connect directly to the turntable otherwise you will need to connect the turntable & these speakers to an amplifier.
Question:	can you use a split copper speaker wire to connect from an old school amplifier to the speakers
Answer:	That's the way they were designed to be hooked up, so yes. Heck, I use old lamp cord and they work as well as they can for their size.

Product features

Polypropylene Full Range Woofer

AA321 bookshelf speakers have a booming yet compact 2.5" Polypropylene full range woofer with Butyl rubber surrounds for protection. The heavy duty ABS construction of their sealed cabinets make these speakers not only durable, but a sleek and stylish addition any indoor system.

Fully Directional Swivel Wall Attachment

Each speaker includes a durable, fully directional swivel wall mount attachment and 4 wall screws. Add precise sound to your home surround sound system by mounting these discrete speakers around the listening area. Turn or tilt the speaker to direct the sound exactly where you want it.

Spring Loaded Wire Terminals

These small, yet sophisticated speakers provide quick release spring loaded wire terminals providing a hassle-free connection to an already established surround sound system. Tuck them into tight corners and high up places without sacrificing accurate and clean sound.

Acoustic Audio by Goldwood AA321 Indoor Mountable Bookshelf Speakers

At 200 Watts Peak Power per speaker, these multi-purpose indoor speakers pack a punch. They were designed to be durable with heavy duty ABS construction sealed cabinets so there is no need to worry about wear-and-tear. At 3.5" high, they make great additions to any surround sound home theater, will fit onto any bookshelf and can be used with any stereo system. With full range sound, 2-way functionality and an unbeatable price adding these speakers to your system is a no brainer.

Simple Design and Easy Installation

Our simple, smooth design, with a choice between black or white finish, allows you to incorporate these speakers into any location. With quick release spring loaded wire terminals, connecting your new speakers to an existing system is a breeze. Seamlessly tuck them into the smallest spaces of your listening area without ever having to forfeit sound quality.

Swivel Wall Attachment

We made sure you are able to place your indoor speakers in your ideal location by adding a swivel attachment and 4 wall screws to mount to any wall. Simply screw the attachment into your desired place and slide the attachment into the custom insert on the back of the speaker. From here you can swivel left, right up or down to whatever degree you choose, guaranteeing focused sound quality exactly where you want it.

Product description

The HD3 Powered Bluetooth Speaker is a perfect example of the extension of this mission. With music streaming services and digital music players becoming the centre of the modern music system, consumers have had to accept a loss of the premium components resulting in the loss of sound quality. The HD3 Series of Desktop Speakers are a culmination of 13 years of product development, combining the same exceptional sound quality with modern features, including high resolution aptX HD Bluetooth with 30 meter range. The built in analog amplifier allows traditional Hi-Fi speaker separation and the analogue audio inputs allow connectivity from many different sources, including a computer, turntable,TV, or Sonos Connect. The HD3 is an incredibly versatile audio system.

• POWERED BLUETOOTH SPEAKERS WITH 100 FOOT RANGE: The HD3 Bluetooth Speakers feature built-in analog power amplifiers that bring you incredible audio. The aptX HD Bluetooth codec with 100 foot range and 24-bit DAC allow you to bypass the low-quality sound card in your laptop or phone to deliver premium quality sound.
• FEATURES: Small speakers with a big sound that fills any room, premium Bluetooth wireless that works with all your devices and apps and high-end sound wrapped in hand-built wood cabinets. Simple setup, no receiver needed, no network setup, no passwords, front panel volume control and headphone jack. Bluetooth, USB, RCA & 3.5mm inputs.
• WORKS WITH: Turntables with built-in or external preamps, all music players: phones, desktop computers, laptops, notebooks, TVs with an analog output, CD and DVD players, video game consoles and all products with 1/8" mini-jack or RCA outputs
• WHAT’S INCLUDED: Pair of Audioengine HD3 Wireless Powered Speakers, Bluetooth antenna, 2m speaker wire, power supply & cord, 1.5m 3.5mm mini-jack audio cable, 1.5m USB cable, microfiber speaker bags and cable bags, setup guide, brochure
• WARRANTY: Audioengine builds quality speakers that they stand behind. All Audioengine products come with a 3-year transferable warranty. COVERAGE: Stellar US based customer support and 3 year product coverage is included. Based in Austin, TX, Audioengine has been changing the way people listen to music since 2005. Our passion is creating products that sound great, are easy to use, and make people want to listen to music every day.

Product features

Product Features:

• High-fidelity Bluetooth aptX HD, with extended 30 meter range and 24-bit upsampling DAC
• USB Audio, 3.5mm & RCA inputs
• Built-in Headphone Amplifier (OPA2134) that drives any high performance headphones
• Mac or PC plug-n-play - no drivers required
• 60W Peak Output + RCA Subwoofer Passthrough (for Subwoofers such as the Audioengine S8)

Works With:

• Mac, PC, tablets, or smartphonesA
• ll operating systems (Windows, MacOS, Linux, iOS, Android)A
• ll audio player apps and music streaming services (iTunes, Youtube, Spotify, Pandora, etc.)A
• ny product with Bluetooth, mini-jack or RCA outputs, or USB audioA
• ll Audioengine digital-to-analog converters and wireless audio adapters

What’s in the Box:

• 1x Pair of Audioengine HD3 Powered Speakers with antenna
• 1x 2m 16AWG Speaker Wire
• 1x Power Supply & AC Power Cable
• 1x 1.5m, 3.5mm Mini-Jack Audio Cable
• 1x 1.5m USB cable
• 2x Microfiber Speaker Bags and Power Supply Bags
• 1x Setup Guide
• 1x Brochure

EVERY APP EVERY DEVICE

Our most-versatile wireless Bluetooth speakers. HD3 Wireless Speakers work with all your apps, music, and devices so no matter how you listen, HD3 has you covered. The ultimate mini music system with wireless that works.

Tidal, Spotify, Pandora…all your favorite streaming apps play instantly.

SET UP IN SECONDS

SIMPLE. NO HASSLE. EASY TO USE.

The HD3 Wireless Speakers are small desktop speakers with a surprisingly large sound for their size.

No network setup, passwords to enter, or buttons to push. Setting up these speakers is so easy you’ll be rocking in no time.

Keep your music fun, easy, and sounding great.

SMALL SPEAKERS BIG SOUND

SURPRISINGLY LOUD

Don’t let their size fool you as this little speaker is packed with much more sound than you would expect.

The HD3 Wireless Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, Premium Bluetooth aptX-HD, and built-in power amps wrapped in precision-tuned, hand-crafted cabinets. Clear, full and powerful audio that fills almost any room.

GO OLD SCHOOL

ANALOG, BABY!

Audioengine wireless speakers are special. Their built-in analog power amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands.

WHY YOU'LL LOVE THE HD3 WIRELESS SPEAKERS

Our most-versatile wireless Bluetooth speakers. HD3 Wireless Speakers work with all your apps, music, and devices so no matter how you listen, HD3 has you covered.

"The HD3 throws down a large collection of features, all packed into perhaps the smallest frame on the market. For the size, the drivers perform above par. For the features, consumers get a substantial value for the cost. The HD3 sets a new bar for a true just-add-music experience."

-Audiohead

Product description

Specifications:

Bluetooth version: Bluetooth 5.0

Amplifier Chip: TPA3116;

Rated output power: 2*50W /4Ω;

Audio input: RCA input + Bluetooth input;

Audio output: 2 set of Banana Speaker Jacks;

Signal to noise ratio: ＞99dB;

Frequency: 20Hz-20KHz;

Power supply: DC 19V 4.74A;

Packing List:

1 * Power Amplifier

1 * Power supply 

1 * Bluetooth antenna

• 🍎[UPDATE] 2020 New Model
• Bluetooth 5.0 wireless streaming range up to 50ft(15m), with bass and treble control, Simple compact design but practical and powerful, Adopt TI TPA3116D2 chip to get clear and clarity sound, no audible noise, dead silent when nothing is playing through it;
• Advanced circuitry design, built-in speakers protection circuit, best for bookshelf/computer/desktop/speakers in your home;
• Home Hi-Fi integrated amplifier, Exclusively designed for the customers who pursue HiFi sound; Ship with power adapter and power cord, you can use directly;
• Perfectly suited for your desktop or a smaller space in your home or office, Aluminum shell to sure high quality, 18-month warranty, you can return the item if you have any problems;

User questions & answers

Question:	Airplay, can a home pod connect to this amp
Answer:	I purchased them before Covid was real so I wasn't really concerned about washing them. They did not have a strong smell, but I did throw them in the dryer with some fabric softener sheets. We were pleasantly surprised at how nice they are.
Question:	If connected via Bluetooth, can you adequately control volume from your smartphone? (Amp will be installed in basement/remotely
Answer:	These are filled with polyester stuffing , no beads . They’re pretty cute for the price .
Question:	Does this require banana plugs
Answer:	I never heard them speak .
Question:	Bluetooth works fine. however when i hook up the rca cables from the amp to a tv, the tv sound continues to play (speakers do not). help
Answer:	There’s an option on the order to return it.

Product features

Bluetooth 5.0 Mini Hi-Fi Amplifier

• Power Adapter: 19V/4.74A
• DC Input Range: 15-24V
• Terminating Impedance: 2 Ohm - 8 Ohm
• MAX Power Output: 50W x 2
• THD: ≤ 0.04%;
• Frequency Range: 20Hz - 20kHz (±1 dB)
• SNR: ≥ 98dB
• Input Sensitivity ≤ 280mV
• Input Mode: Bluetooth and 3.5mm AUX
• Bluetooth Transmission Distance: Up to 50ft(15m)

Bluetooth 5.0 Compatible

• Bluetooth 5.0 streaming range up to 50 ft(15m)
• Perfect for home bookshelf/computer/desktop/speakers

Bass and Treble Control

• With bass and treble control
• Home Hi-Fi integrated amplifier, Exclusively designed for the customers who pursue HiFi sound

Mini but Powerful

• 100watt MAX power output. Simple compact design but practical and powerful.
• TPA3116D2 chip to get clear and clarity sound, no audible noise, dead silent.

NO Sparks

• 2020 Upgraded Version
• Built-in Protecion Circuit, NO SPARKS when power supply plug

How to use BT10A amplifier?

• Step 1 - Connecting the Speaker Wire
• BT10A accept bare wire, banana plugs, spade lugs, or pin terminators. Please turn off the amplifier before connecting to the speakers.
• Step 2 – Connecting the Power Supply
• Be sure that the volume/power switch on the front panel is in the OFF position before connecting the power supply.NOTE: Please plug the power cord into the amp THEN the AC outlet.
• Step 3 – Operation
• Turn on the BT10A volume/power knob and set the volume control to an initial setting of about 9 o’clock. Turn on your audio input source and adjust the volume to your desired listening level.

Product description

Introducing a speaker series versatile enough to deliver an unprecedented and real audio experience, and with a soundstage so expansive you can feel the energy and passion of the original performance, all while staying in harmony with your existing living spaces-no special listening room or setup required.

• 3-way, 3-speaker bass-reflex system, 5-1/4 inches Foamed-Mica Cellular Reinforced Woofer, 1 inch Polyester Main Tweeter
• 3/4 inches Sony Super Tweeter for immersive sound staging, Sound Reproduction to 50kHz (for High Resolution Audio), 6 ohm Speaker Impedance
• Optimized Crossover componentry for a clear audio path, 100 W Maximum Input Power.Front Speaker Input terminal:Screw type
• Front Speaker Rated Impedance: 6 ohms

User questions & answers

Question:	What is the frequency response
Answer:	53–50,000 Hz frequency response that is the specs from the Sony product page
Question:	How is the bass to use without subwoofer
Answer:	The SSCS5 has respectable bass response for a bookshelf, down to 50 Hz or so, but I would highly recommend you pair with a decent subwoofer for best results. I use the SSCS5 in a 2.1 setup in our master bedroom and they absolutely slay for movies and music! The imaging and soundstage is spectacular. Really no need for a full surround setup if space is limited or you don’t want to monkey around with wiring rear speakers. However, pairing these with a good subwoofer makes a world of difference in the impact you will experience for movies. If you listen to a lot of electronic music, a good sub is a must.
Question:	What are the size(diameter) of tweeters / midranges / subwoofers ? And do these have passive crossovers inside
Answer:	Dear Kim,There is a passive crossover in the speaker. 3/4" Super tweeter, 1" Tweeter, and 5 1/4" Woofer.Eric C
Question:	This price is for a pair or are sold individually
Answer:	Is this a pair of speakers or just one?

Product features

3-way 3-driver Bookshelf Speaker System

Introducing a speaker series versatile enough to deliver an unprecedented and real audio experience, and with a soundstage so expansive you can feel the energy and passion of the original performance, all while staying in harmony with your existing living spaces-no special listening room or setup required.

Product description

Klipsch RP-600M Reference Premiere Bookshelf Speakers - Pair (Ebony)

• 1” titanium lts vented tweeter with hybrid tractrix Horn
• 6.5" Spun copper cerametallic woofers
• Bass-reflex via rear-firing tractrix port
• Dual binding posts for bi-wire/bi-amp
• Strong, flexible removable magnetic grille

User questions & answers

Question:	What's the difference between the "ebony" and "piano black" colors? Hard to tell from the pics... Front looks glossier, but what about the top/sides
Answer:	These are made in Asia, with Usa materials Hope that answers your question! Please Don't hesitate to message us again with any questions Thanks John B. jb at pyleusa com Customer Service Guru
Question:	Can these be used as desktop speakers? I have a very large L-shaped desk (almost 4 feet deep at the L
Answer:	Ceramic healthy coating Hope that answers your question! Please Don't hesitate to message us again with any questions Thanks John B. jb at pyleusa com Customer Service Guru
Question:	I have a Sansui G-6000, 65 watts per channel. I would work well with these speakers
Answer:	All pots are induction compatible Hope that answers your question! Please Don't hesitate to message us again with any questions Thanks John B. jb at pyleusa com Customer Service Guru
Question:	Does anybody care about Ohms and Watt? Where are the specs for these speakers
Answer:	Connect your radio and stick the antenna to the windshield.

Product features

Klipsch RP-600M Bookshelf Speakers

Leveraging a 1" titanium tweeter matted to our proprietary hybrid Tractrix horn - the RP-600M bookshelf speakers deliver incredible acoustics to fill your home with loud, crystal-clear sound and robust bass.

FEATURES:

• 1” Titanium LTS Vented Tweeter with Hybrid Tractrix Horn
• 6.5" Spun Copper Cerametallic Woofers
• Bass-Reflex via Rear-Firing Tractrix port
• Dual binding posts for bi-wire/bi-amp

WOOFER ANATOMY

Klipsch Cerametallic cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity.

Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution.

TRACTRIX PORT + DUAL TERMINALS

The rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies.

The RP-600M bookshelf speaker features dual input terminals so you can bi-wire or bi-amp your speakers.

FINISHED TO PERFECTION

The RP-600M ebony and walnut finishes boast satin painted baffles with a scratch resistant design for an elegant audio solution to your home theater system.

Strong, flexible, magnetic grilles provide protection and a sleek aesthetic to compliment your home's decor.

Product description

NOTE: The COVO-S is not self-powered, and requires an amplifier and speaker wire (not included) to play music.



The COVO-S compact speaker system is another landmark product form Micca that delivers great sound in a small package. Drawing from the same classic yet distinctively design as Micca’s popular MB series speakers, the COVO-S looks great and is easy to place in wide variety of room decors. Its exceptionally rich sound belies its diminutive size and makes it a great selection for use in a small to medium sized listening areas such as an office. The COVO-S is shielded.



Superior Sound Through Superior Engineering

Built using patented concentric driver design, the COVO-S’s audio performance results from a balanced application of sophisticated drivers, enclosure tuning, and crossover construction. The speaker driver used is a 3-inch wool paper cone woofer with an inset mounted 0.75″ PEI dome tweeter. By sharing a common acoustical center point, the concentric woofer and tweeter design maintains coherency through the crossover transition region. The unique curve of the woofer cone serves as a horn waveguide for the tweeter, resulting in improved off-axis dispersion characteristics.



The COVO-S employs a ported enclosure design, generating modest bass output for a warm sound signature. A 6dB/octave crossover makes for a smooth transition between the woofer and the tweeter. Rounding out the package are full size 5-way speaker wire binding posts and removable grills.



Compact and Affordable

Hearing is believing. Discover how good a pair of affordable compact speaker can be by trying them risk free in your home. Due to the COVO-S’s small size, they work best when used in a small to medium sized listening area. Place them along a wall or near a corner of the room for better bass output. If you are not absolutely delighted with the COVO-S’s performance, simply return them for a refund.

• Patented concentric driver design delivers common acoustical center point and maintains coherency through crossover region
• 3-Inch wool paper cone woofer with waveguide cone design for improved tweeter dispersion
• 0.75-Inch PEI dome tweeter for crystal clear treble and accurate imaging
• Ported enclosure delivers extended bass response with low distortion
• 6dB/octave crossover at 3.2kHz makes for a smooth transition between the woofer and the tweeter

User questions & answers

Question:	Does this come with two
Answer:	Yes, pair of speakers.
Question:	Can these be driven off of another pair of powered speakers? I have a pair of M-Audio Studiophile DX4s and would like to use these for more highs
Answer:	I looked your speakers up. The only output they have if for the right speaker. So no, you could not drive these off your M-Audio speakers. You could probably split your source and drive a second pair of amplified speakers or passive speakers like these along with an amplifier. But your M-Audio speakers have tweeters, so I'm not sure these would provide a significant improvement in highs.
Question:	Will these work OK for a 5.1 surround satellite speakers? Front and rears
Answer:	Yes it will work fine. I use them for rears. However i would recommend you to consider the big brother of these the Micca MB-42Xs and its matching center for the front. if you cant afford it my suggestion is that you start with a pair of MB-42Xs in stereo config and build up to 5.1 as you have more money
Question:	Is the price per speaker or for the pair
Answer:	Price is for one PAIR

Product description

The name Monitor is special to Polk. The original Polk Monitor Series, produced in the mid-1970s, ushered in the modern loudspeaker era by setting the standard for performance and value. The original Monitor Series is the line that made Polk famous with its simple, sturdy construction, clear, accurate sound, powerful bass and superior imaging all at a price that made great sound available to everyone. The reborn Monitor Series is classic Polk: a quality-built, affordable line of high performance loudspeakers for music and home theater. They are highly efficient, so they can be driven easily by unpretentious receivers, and they are voice matched for lifelike surround sound environments. The Monitor Series boasts a stylish look that complements today's flat screen technology, with wood grain finishes and modern Titanium faces. Built for speed, sound and value, the Monitor Series is a great introduction to high performance sound.

• FROM THE BESTSELLING MONITOR SERIES – This bookshelf is equipped with 1" Dynamic Balance dome tweeter and 5-1/4" Dynamic Balance woofers that delivers HIGH QUALITY AND GREAT POWER IN A 2-WAY DESIGN
• INCREDIBLE SOUND AT AN AFFORDABLE PRICE – Enjoy clear, crisp and spacious stereo sound with wider dispersion for lifelike 3-dimensional audio in your bedroom, living or entertainment room
• DELIVERS DETAILED HIGH FREQUENCY RESPONSE WITH REALISTIC REPRODUCTION OF VOCALS & INSTRUMENTS – Powerful deep bass, better mid-range and superior audio are sure to bring your party and movie nights to life
• CREATE A COMPLETE AND IMMERSIVE HOME THEATER SETUP by combining two bookshelf speakers with a Polk CS1 Center Speaker for any small or medium sized room and adding Polk Monitor 60 or 70 Tower Speakers for surround sound in larger rooms
• Polk's UNWAVERING COMMITMENT, RELIABILITY, AND CRAFTSMANSHIP has made it one of the most trusted names in home audio speakers and entertainment systems. They bring out BEST IN TECHNOLOGY, so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART.

User questions & answers

Question:	Why are there two sets of wire inputs on the back of the speaker
Answer:	See this well written article on it, I am actually going to buy the wires myself after reading up on it despite the much higher price tag, but they are a good price on amazon, other have written they are $100 at Best Buy but $30 on Amazon -- http://www.chord.co.uk/help-and-information/speaker-cable-guide/bi-wire-or-single-wire/
Question:	does anyone know why it has 2 sets of wire inlets on each speaker? Normally it's one set black and red
Answer:	The 2 sets of speaker 5 way binding posts are for bi-wires or bi amps if you remove the bridges so you can by-pass the speaker cross-over. It's a waste of time and money since you will need an external cross-over. I wouldn't bother with it at this price point. They are as good as you can get for the price.
Question:	Why do these have a set of two connections at the back? Is it for two audio sources
Answer:	Oh my gosh please disregard any of the stupid people who said its benefits are debatable, or that it helps midrange. Those people shouldn’t answer questions about things they obviously know nothing about. I’m reporting those answers as not only wrong but intentionally ignorant. The truth is most people have their front 2 mains wired to the receiver. Today’s receivers are 7.1 and more 9.2.4 or 11.2.whatever. However most users choose not to wire speakers to the extra surround and Atmos channels. 5.1 being fine. So in addition to wiring the entire speaker to just the front Left and Right, you can remove the metal connecting both sets of posts. Leave the original speakers wires. Now go into your receivers set up menu and go to speaker set up. Most receivers have a selector for if you’re using the front-above speaker option. If not, now you can run a 2nd speaker wire to both speaker and connect to the 2 unused posts. The immediate benefit is that instead of only 2 of the amp’s 100w channels pushing the whole Left and Right, you now have 4 of the amp’s 100w channels pushing your speakers. Each speaker gets 200w.
Question:	Is there a "practical"reason for these speakers to have so many individual speakers inside them
Answer:	Yes. Oversimplifying but hopefully still useful: There's an ugly trade-off between bass quantity and quality. Larger drivers have more surface area (volume really, as a speaker is effectively an irregularly-shaped piston for pushing and pulling air). More surface area means more bass. But it also means more inertia and typically sloppy or booming (mid-)bass lacking in detail or transient response ("edges"). Smaller drivers respond faster and create tighter, punchier, more accurate (mid-)bass because it can respond faster, but less low bass due to the reduced surface area. Using multiple smaller drivers is an attempt to retain the tight and accurate mid-bass but also team the drivers up to move enough air to extend the bass down low. It's an attempt to keep the best attributes of both approaches. However, real bass-heads might still want a little more low bass. Fortunately, really low bass (say 20-60 Hz) isn't particularly critical and you can get away with a massive woofer like 12" or even 15". For this, a subwoofer is perfect. If you add a subwoofer to a speaker like this, be sure to cross it over well below 100 Hz, as you paid for bass accuracy and you wouldn't want to degrade it by too much overlap. Think of the subwoofer as turning your 3 way speakers into 4 way speakers. You don't want much overlap. As with any free audio advice, take nobody's word for anything and experiment for yourself. Every room and every ear is different, so I might be all wet. That said, there' s the rationale, in a nutshell.