Product description

Rockville BluTube Bluetooth tube 70 watt amplifier/home theater stereo receiver

rockville BluTube audiophile grade tube amplifier with Bluetooth. 25 watts x 2 RMS @ 8 Ohm. 35 Watts x 2 RMS @ 4 Ohm. Tube Amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power!.

• Rockville BluTube Bluetooth tube 70 watt amplifier/home theater stereo receiver
• Rockville BluTube audiophile grade tube amplifier with Bluetooth. 25 watts x 2 RMS @ 8 ohm. 35 Watts x 2 RMS @ 4 ohm. Tube Amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power!.
• Built in Bluetooth with 33 foot range. Built-in preamplifier. sets of RCA inputs to connect to any audio device like a TV, laptop, or MP3 player, etc.
• Headphone output. Vu meter. Adjustable bass and treble (2 band equalizer). USB input for music files from USB thumb drive. Usb can charge your phone or other USB device. Rear speaker terminals: banana Plug/ binding post outputs for 2 speakers.
• Frequency response (3dB): 25hz-20khz. Input impedance: 47Ko. Input sensitivity: 300mV. Output Impendence: 4-8ohm. Total harmonic distortion): =0.02%. Signal-to-Noise ratio(s/n): =86dB. Bluetooth: 2.1+Edr. Usb: Supports WAV/MP3/WMA/APE/FLAC. 110V/220V switchable. Unit weight: 6.6 lbs. Unit dimension: 10.6"X10.2"X5.1".

User questions & answers

Question:	Can I be able to play bluetooth and wired speakers simultaneously
Answer:	I don't think you can. The input selector switch has 3 settings for AUX (wired speakers), BT/USB and Optical Coaxial.
Question:	What size is the headphone jack
Answer:	I think 3.5 TRS means 3.5mm, which is the standard consumer size of 1/8 inch, used on most cell phones (except newer iPhones, stupid Apple) and portable music players.
Question:	Do the “blutubes” have blue leds in them? i really want a retro look and am trying to avoid any rgb. thanks
Answer:	There's no such thing as a blue color in a legit "retro" amplifier -real vacuum tubes glow golden amber/orange.
Question:	Will I need a phono preamp with this unit to hook up my turntable
Answer:	This unit has a tube preamplifier, and a solid state amplifier. However, it doesn’t have a built in phono stage (phono preamplifier). Unless your phono has a built in preamp (like an Audio Technica LP120 or similar), you will need a phono preamp if you want to play your vinyl. Phono preamps are fairly inexpensive in the quality range of this unit, so send Amazon another $20 and get your preamp. Don’t worry about Moving Coil (MC) or Moving Magnet (MM) cartridges. If you use an MC cartridge, you probably aren’t going to buy this amplifier.

Product features

Rockville BluTube 70w Tube Amplifier/Home Theater Stereo Receiver w/ Bluetooth

• Tube Amplifier / Receiver
• 5 Foot RCA to 3.5MM cable
• 5.5 Foot Power cable
• Owners manual

Features:

• Rockville BluTube Audiophile grade tube amplifier with bluetooth
• 25 watts x 2 RMS @ 8 ohm
• 35 watts x 2 RMS @ 4 ohm
• Tube amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power!
• Built in Bluetooth with 33 foot range
• Built-in Preamplifier
• sets of RCA inputs to connect to any audio device like a TV, Laptop, or MP3 player, etc
• Headphone output
• VU meter
• Adjustable bass and treble (2 band equalizer)
• USB input for music files from USB thumb drive
• USB can charge your phone or other USB device
• Rear Speaker Terminals: Banana plug / binding post outputs for 2 speakers
• Frequency Response (±3dB): 25Hz-20kHz

Product description

 - Vintage Classic, Dual Knob, Metal textured panel.

 - Built-in Bluetooth + Microphone.

 - Support hands-free calls.

 - Support advanced audio transmission mode.

 - Support the clock indicating while power is off.

 - High-quality digital stereo FM radio.

 FM: Support three-band radio store FM1-FM2-FM3, and can preset 18 radio stations. (Radio frequency: 87.5-108MHz)

 - Support USB/TF card reader.

 - Support audio: MP3/WMA/WAV    formats and so on.

 - Support folder play function.  

 - Support breakpoint memory and ID3 play.

 - Support remote control.

 - Rotary electronic volume control.

 - MP3 play supports pause /preview/repeat/random play and 10 tracks up/down selections.

 - Electronic type bass/treble/left and right balance/front and back balance volume control.

 - Multiple EQ scenario mode choice: rock, pop, classical, etc.

 - Support mute and equal loudness (LUOD) control.

 - Front AUX audio input hole and rear terminal L / R audio RCA output hole.

 - 4 track high-power output (4 high-power loudspeakers) 60W*4.

 

Specifications

- Product Name: Multimedia Car Stereo Vehicle Radio Player

- Work Voltage: DC12V-14.4V

- Machine size: 7*1.97*2.68 in/178*50*68 mm

- Overall dimensions: 7.4*2.28 in/188*58 mm (H)

- Weight: 465g

Package Contains

1 x Car MP3 Player

1 x Remote Control(with battery, Battery model is CR2025)

1 x Power Cable

1 x Speaker Cable

2 x Keys to install

1 x English user manual

We have 12 months warranty. Any further problems, please feel free to contact us.

• 【 Vintage Classic Car Stereo Receiver】The car stereo can connect your smartphones by bluetooth, makes phone calls safer and easier. Bluetooth device and high-power amplifier delivers clear audio. White backlight LED Display Dual Knob Audio Design, Metal textured panel, rekindling your precious memories.
• 【 Multimedia Payback & USB/SD/AUX Port 】Preset EQ(Pop/Rock/Classic) to enjoy music smoothly, Tune into the 18 presets FM radio stations. Support MP3, WMA and WAV music formats. The USB/SD/AUX port of the vehicle radio make you have a convenient audio library.
• 【 Stay Hands-free & Wireless Remote Control 】The phone is dangerous to yourself while driving. Answer calls with just one push of the button. Make calls can hands-free. No Need To Hold Your Phone and no distractions ever again. The car stereo radio player also can prevent from dangerous. You can control all by the wireless remote control of the car radio player.
• 【 Break-point Memory Playing&Clock Function 】The car stereo has powerful break-point memory playback function, avoiding the music restarting every time you turn on the player. By the way, the stereo has repeat/random/intro play functions. And its clock function can make drivers watch time more convenient rather than using mobile phone to make themselves in danger. In addition, we also have AUX-in function and charge function. Make your driving more convenient and make your trip safer.
• 【 Easy to Understand Installation Tutorial 】We have an detailed DIY installation manual in the listing to download. Please follow our tips and instructions to install, it will be safer and more convenient. And the item has 12-month warranty. Any further problem, please feel free to contact us. We will solve the problem for you in the first time.

User questions & answers

Question:	My 65 chevy pickup has two holes for the knobs. Can the face come off this stereo to put through or do I have to cut out the dash
Answer:	Hello, product panel size is 188mm (7.4in) * 58mm (2.283in), knob spacing size is 125mm (4.92in), thank you!
Question:	will it fit a Mucury Mountaineer
Answer:	Hello, please check whether the size of your car mounting position is appropriate, and the power line and horn line can be converted. Thank you!
Question:	Will it work in my 1986 ford mustang
Answer:	I doubt it. You need an input to plug it into. Don't believe it will work in a headphone jack
Question:	Will it fit a 91 grand marquis
Answer:	Dear customer Please check whether the size of your car installation position is suitable for the size of this product, The power cord and speaker cord can be converted to wiring, thank you!

• T Shape, plug and play, easy to install and greatly improve FM Stereo Reception. 5.9 feet longer fm coax antenna cable make you receive more channels and radio stations, help you enjoy your life better.
• This 300 Ohm FM antenna provide a better radio solution for radio stereo receiver on your table top, home, office, garage, basement and so on.
• Stretch the end of the antenna as far as possible away from the device for the best reception.
• Fits all receivers with a clip or terminal FM socket. Before placing the order, please make sure your FM socket is the same as what we have mentioned.
• Package include: 1PCS antenna

User questions & answers

Question:	Does this antenna would improve the AM reception
Answer:	Sorry, it's an FM antenna. It can't improve the AM signal. They have different frequencies. You can try this one to improve the AM signal. ASIN：B01CSFVFT4
Question:	How long is the cord
Answer:	picture the letter Y. from where you attach it up to the bottom of the where it branches off is 6 feet . the top of the Y each branch is three feet. I has worked really well for me so far.
Question:	Can i just screw down on the forked ends of this wire? my reciever is an old onkyo which i used to wrap bare wire around connection and tighten down
Answer:	Yes, if you have screws for the connector you can use this. I have an Onkyo also but my set up required I take the ends off split the wires an use it that way. Your installation will be much easier!
Question:	What is the length of the dipole
Answer:	The dipole length is 0.8 meter, and the spade to the T root is 1.8 meter

Product description

Avantree RC500 is a long range 100FT/30M Bluetooth receiver incorporating the latest “aptX low latency” technology, for CD-like quality sound with virtually no delay. Multifunctional support optical, voice prompt. Provide the best solution for your home audio systems to wireless stream hi-fi audio directly.

Specifications

* Bluetooth version: 4.2

* Support profiles: A2DP, AVRCP

* Audio codec: aptX, aptX-LL, SBC

* Operational range: Class I, up to 30 meters

* Input voltage/ current: DC5.0V / 500mA

* Operating temperature: -10 ℃ ~ 45 ℃

* Storage temperature: -20 ℃ ~ 60 ℃

* Support sampling rate in optical mode：≤48KHz, 16bit

* Product size: 4.49’’* 2.95’’* 1.18’’ (114×75×30MM)

* Product weight: 0.20lb (90g)

What’s in the box?

* Avantree RC500

* Micro USB cable

* Optical cable

* 3.5mm audio cable

* 3.5mm female to RCA male cable

* User manual

* Quick user guide

Warranty

We offer 36 Months Warranty for normal use. Live online support, Telephone Support, and email support are available. Video user guide are available also from Avantree site.

Support

Any issues or suggestions, contact us via our US toll free No, Intl number, OR email us and 1 business day reply is guaranteed. We are committed to 100% customer satisfaction.

• [BLUETOOTH RECEIVER] Turn a pair of normal speakers into wireless speakers using this long range Bluetooth receiver and stream your favorite music to your favorite speakers. Full voice menu prompts and easy to read LED status indicators make the RC500 simple to set up and use. Compatible with Echo & Echo Dot.
• [LONG RANGE, AUX & OPTICAL SUPPORT] Bluetooth Class I technology together with a robust external antenna design means you can receive audio signals up to 100ft (30m) away. In addition the RC500 supports both analog (RCA/3.5mm aux audio) and digital (optical) output. Note: Wi-Fi routers, walls or other obstacles, wireless speakers, cordless phones and other wireless devices can affect Bluetooth reception. Please relocate your RC500 so it is not too close to such devices.
• [TRUE WIRELESS STEREO] The RC500 supports True Wireless Stereo (TWS). Purchase two RC500 to stream audio to 2 separate sets of speakers - one set (of 2 speakers) will become R channel and one set (of 2 speakers) L channel. Perfect for large rooms or a studio where 1 set of speakers is not enough. NOTE: It doesn't support TWS and low latency simultaneously.
• [24-MONTH WARRANTY & ONGOING SUPPORT] Feel confident in your purchase with the 24-month warranty that's included with the Avantree RC500. You're also welcome to get in touch with our email support team if you have any questions about your purchase.

Product features

LONG RANGE

RC 500's Bluetooth Class I technology, coupled with a robust external antenna design means you can receive audio signals up to 100ft (30m) away. No need to stick close to your device to experience high quality sound!

Note: Wi-Fi routers, walls or other obstacles, wireless speakers, cordless phones and other wireless devices can affect Bluetooth reception. Please relocate your RC500 so it is not too close to such devices.

No Lip-sync Delay

Experience media at its best thanks to aptX Low Latency support feature which eliminates sound delay, making the RC500 an ideal companion for watching movies and playing video games.

Note: To avoid audio delay, make sure the transmitting device also supports aptX low latency (visit aptx website for a list of supported devices). Alternatively you can choose Avantree Oasis.

True Wireless Stereo Supported

The RC500 supports True Wireless Stereo (TWS). Purchase two RC500 to stream audio to 2 separate sets of speakers - one set (of 2 speakers) will become R channel and one set (of 2 speakers) L channel. Perfect for large rooms or a studio where 1 set of speakers is not enough.

Wide Compatiblity

Supports OPTICAL / AUX / RCA audio output, which is compatible with 99% of the speakers, AV receivers and home stereo.

Voice Prompt Supported

No need to second guess if the system is working as intended. The RC500 is easy to pair and connect and features voice prompts for every operation.

LED status indicators

Separate LED indicators for pairing, connected device , different codec S(aptx low latency, aptX, SBC), 3.5mm audio / optical connection. Easy to set up and use and takes the guesswork away from whether or not pairing was successful.

Frequently Asked Questions

Q1: What range can I expect?

This is a Class 1 Bluetooth device and can achieve up to 100ft (30m) in open air line-of-sight conditions. For Indoor use the range is up to 66ft (20m). If you work with Class 1 transmitter Oasis you can achieve 164ft(50m) in open air.

In general, operation range can be affected by physical obstructions (walls, people, etc.), wireless interference (Wi-Fi routers, Wireless TV adapters, cordless phone etc.). Please relocate your RC500 so it is not too close to such obstructions.

Q2: Will the RC500 work with my Bluetooth headphone or speaker?

No. The RC500 is not a Bluetooth transmitter and will not work with Bluetooth headphones or speakers. In fact, it is a Bluetooth receiver and work with your wired AV receiver, home stereo system to wirelessly stream music from your PC / phone / tablet Bluetooth.

Specifications

• Support profiles: A2DP, AVRCP
• Audio codec: aptX, aptX-LL, SBC
• Operational range: Class I, up to 30 meters
• Input voltage / current: DC5.0V / 500mA
• Operating temperature: -10 ℃ ~ 45 ℃
• Storage temperature: -20 ℃ ~ 60 ℃
• Support sampling rate in optical mode: 48KHz, 16bit
• Product weight: 0.20lb (90g)

Product description

Description:

Product Name: Car Radio MP3 Player

Weight: 570g

Power supply voltage: 12V

Storage capacity: other capacity

Play time: Yes

Sound source: Vehicle Integrated MP3 player

Power supply mode: external power supply

Size: 178*115*58mm

Material: hardware, electronics, plastic

FM function: Yes

Screen color: OLED color screen

Packing include:

Host

Remote control

Instructions

Power cord

Key dismantling sheet

Note: because manual measurement, there will be some error, which is normal.

Due to the light and screen setting difference, the color may be slightly different from the pictures.

• --brushed metal panel, dual knob development and built-in bluetooth + phone.
• --hands-free calls and supports advanced audio distribution profile.
• --off time display function and digital high-quality fm stereo radio.
• --preset 18 stations (frequency: 87.5-108 mhz) and support usb / sd / mmc card reader.
• --support audio: mp3 / wma / wav, etc.support folder function and support breakpoints and id3 play.

Product description

PyleHome Model : PUNP34BT

Classic-Style Bluetooth Radio System

Retro Classic-Style Bluetooth Radio Speaker Sound System, USB/SD Readers, AM/FM Radio

System Features:

Classic Style Radio with Modern Technology

Built-in Bluetooth for Wireless Music Streaming

Elegant Vintage Replica Crafted Sound System

AM/FM Radio with Retro Styled Dial

Aux (3.5mm) Input Connector Jack

Connect External Devices (Smartphone, Tablet, MP3 Players)

USB Flash Drive & SD Memory Card Readers

USB Port Double Function for Device Charging

Plays Your Favorite MP3 Digital Audio Files

Simple Rotary Knobs and Button Control Center

RCA (L/R) Output Connector Jacks

Ability to Connect to External Speaker Systems

Full Range Sound Reproduction

Dual Built-in Stereo Speakers

Bluetooth Connectivity:

Works with All of Your Favorite Devices

(iPhone, Android, Smartphone, iPad, Tablet, etc.)

Stream your Audio through the Turntable's Speaker System

Bluetooth Network Name: 'Pyle Turntable'

Bluetooth Version: 2.1

Bluetooth Wireless Range: 30'+ Feet

Technical Specs:

Digital Audio File Compatibility: MP3 / WMA

Maximum USB Flash/SD Card Support: 32GB

Construction Material: Wood, MDF Fibreboard

Power: 110V, AC

Dimensions (L x W x H): 7.1'' x 11.8'' x 7.1'' -inches

The Pyle Vintage Radio Sound system combines yesterday's classic style with today’s latest technology. Built-in Bluetooth and full range stereo speakers allow you to wirelessly stream music from devices like iPhones, Androids, Smartphones, iPads, Tablets, etc. The retro system style fills your room with rich sounds and can easily become the center-piece and add flare to any room in the house. Listen to all of your music thanks to versatile audio playback options. Connect external devices with the Aux (3.5mm) input jack, AM/FM radio with retro-styled dial, USB flash drive reader, and SD memory card reader -- all designed to fill the area with crisp stereo sounds! Enjoy the classic and iconic style along with today's latest hi-tech features with the Pyle Vintage Bluetooth Radio Speaker System.

• CLASSIC RETRO STYLE: Pyle Vintage Radio Sound system combines yesterday's classic style w/ today’s modern technology. Will surely take you back in time to bring you the ultimate music experience. Features elegant vintage replica crafted sound system
• BLUETOOTH-COMPATIBLE: The classic radio features built-in bluetooth wireless music streaming w/ range of over 30 ft. Works w/ today’s latest devices including iPhone, Android, iPad, tablets, laptops and computers with hassle-free receiver pairing
• 3 INPUTS: The retro inspired speaker lets you connect external devices like MP3 players via the AUX input. Also equipped w/ USB flash drive, SD memory card readers to play stored digital audio files. USB port doubles as charging port for your devices
• BUILT-IN STEREO SPEAKERS: Features dual built-in stereo speakers for a full range sound reproduction. Equipped with RCA (L/R) output connector jacks which allow you to connect external speaker systems, AM/FM radio with retro styled dial
• BUTTON CONTROL CENTER: The old fashioned speaker features simple rotary control knobs and front panel button control center for hassle-free audio adjustments. It measures 7.1” L x 11.8” W x 7.1” H in total, perfect for countertop or desktop placement

User questions & answers

Question:	Can you play music from USB (mp3 format
Answer:	Yes you can use one speaker 🔊 if not both at the same time.
Question:	Can i hook ipad via the usb and then use blue tooth for additonal speakers
Answer:	If your CD player with line output,you can connect it to our speaker by LINE RCA input.
Question:	Is the cabinet made of wood
Answer:	Here is our own warranty&return policy: It's free to return or get a replacement within one month due to product quality issues, such as damage in shipping or defective functions, etc. And it's free to get an accessory to repair within one year due to product quality issues.
Question:	How is it powered
Answer:	Hello, I think they would work for that. I am used them for an outdoor event with about 125 people and you could hear it just fine so I think indoor would work even better. Just my opinion though.

Product features

Pyle Vintage Retro Classic Style Bluetooth Radio Sound System

• Classic Style Radio with Modern Technology
• Built-in Bluetooth for Wireless Music Streaming
• Elegant Vintage Replica Crafted Sound System
• AM/FM Radio with Retro Styled Dial
• Aux (3.5mm) Input Connector Jack
• Connect External Devices (Smartphone Tablet MP3 Players)
• USB Flash Drive & SD Memory Card Readers

• USB Port Double Function for Device Charging
• Plays Your Favorite MP3 Digital Audio Files
• Simple Rotary Knobs and Button Control Center
• RCA (L/R) Output Connector Jacks
• Ability to Connect to External Speaker Systems
• Full Range Sound Reproduction
• Dual Built-in Stereo Speakers

Product description

Yamaha, the most trusted brand in home audio, adds Bluetooth compatibility in this Hi-Fi receiver for easy wireless access to streaming music services and music on your smartphone or other devices. Enjoy the connectivity and the outstanding and legendary quality of Yamaha Natural Sound.? Frequency Response: 10 Hz – 100 kHz (0 ± 0.5 dB / 0 ± 3.0 dB).

• Advanced circuitry design
• Bluetooth to your favorite streaming music services
• 40 station FM/AM preset tuning; Frequency Response: 10Hz – 100kHz (0 plus/ minus 0.5 dB / 0 plus/ minus 3.0 dB)
• Brushed aluminum finish and simplistic design
• Speaker selector for 2 systems. Input Sensitivity (CD): 500 MV/47k ohms

User questions & answers

Question:	Even though there is no subwoofer output, can one be connected anyway
Answer:	NO!! There are line out jacks but they are fixed, not variable. This means when you turn the volume knob up and down, the volume to the subwoofer stays the same level. See page 10 of the manual here: https://usa.yamaha.com/files/download/other_assets/2/794512/web_ZU46020_R-S202_om_UA_En.pdf
Question:	What is the Bluetooth range
Answer:	There are 3 classes of BT devices. The ranges are under 10m (Class3); 10m (Class2) and 100m (Class3). The range you get between two devices will be the range of the least powerful device. If that's a cell phone streaming music, expect less than ten meters. If it is a computer with a Class2 BT radio, expect a solid ten meters. But the only way you will get more than ten meters (30 feet) reliably, is if both devices are Class 3. And portable devices rarely are.
Question:	can i hook up my turmtable as well
Answer:	I have a question more than answer. My turntable is the rather cheap, ION LP mp3 converter, it has a built in preamp, has a pair of red white RCA output. BUT, WHEN I PLUG IT INTO THE #3 RCA PORT, AS INDICATED ON THE PRODUCT PAGE FOR TURNTABLE, the speakers have no sound. Now, my "speaker" is a Yamaha HS5 monitor, it's hooked to the OUT RCA port via a 1/4" jack at the back of the monitor. I suppose I'll have to use proper hi-fi speakers connected via the loose wire ports?
Question:	So can this fit a total of 4 100watt speakers at once OR 4 25watt speakers at most
Answer:	100 "X" multiplied by 4 = 400 watts max, and multiple speakers can be connected to single channels if you have a full understanding of OHM's and how the wattage changes with different connections, but a single speaker on each channel that matches up closely at least in OHM's and watts will sound best, but multiple 25watt speakers would be fine on a 100watt channel, and with 4-100watt channels that can be repeated if desired, but if that's done with high power low ohm speakers, they will over draw power and burn up the reciever/amplifier and all this information is found via browser search, or just go basic and match printed numbers and sound great and dont worry about it burning up because of something you did.

Product features

The Delight is in the Details

The R-S202 gives you Yamaha’s 125 years of music heritage packaged to reproduce music as it would be experienced live. Bluetooth connectivity adds easy access to streaming music.

Each detail of this receiver was optimized for maximum power and minimal interference. The power transformer was positioned near the amp circuit for peak power supply. The signal ground and power supply ground connect at one point, achieving a higher S/N ratio.

Sleek Design

Less is more. Brushed aluminum finish gives an understated luxury feel that will last in form and function for years to come.

Product description

Toshiba presents a Micro component speaker system that is equipped with Bluetooth wireless audio streaming, USB playback and a CD player compatible with CD/MP3/CD-R/CD-RW. Super bass will deliver a more powerful Deep bass which makes it perfect indoor use.

• Bluetooth streaming for all Apple and Android compatibility
• MP3/CD player Boom box with a built-in LED display
• Ideal for any home setting and any genre of music
• Have both options, to tune manually or auto scan and preset up-to 30 stations, to set your favorite channels for a one-touch recall.

User questions & answers

Question:	Can you hook up external speakers to it
Answer:	No. You can hook up auxiliary components for input, but no output like extra speakers. The system sounds great, like a much larger stereo.
Question:	Can this be hooked up to bluetooth speakers in another room
Answer:	It is a Bluetooth stereo, so you don’t need Bluetooth speakers. I use my Bluetooth from another room but not too far away or else you lose the connection.
Question:	can you connect to external speakers
Answer:	There are no external connections for speakers. You can only pair another device via Bluetooth to play through the unit itself.
Question:	One reviewer says 8" deep,another says 11". Can you clarify? Also wondering where the cd tray is. Thanks
Answer:	Hi! The unit is 11” deep, 16” wide and 5” high. I just measured mine. The CD tray is located directly below the display screen where the Toshiba logo is. Also, it does sound great with the EQ set to “rock”. Hope this helps!

Product features

Toshiba TY-CWU700

The Toshiba TY-CWU700 features an elegant vintage wooden design. It comes packed with modern technology that allows it to play music from a wide array of audio sources including smartphones, USB flash drives, and CDs.

Bluetooth: Stream Wireless Music, Internet Radio, and Podcasts

Bluetooth lets you stream wireless music from an enabled mobile device, leaving you free to mingle with guests, clean the house, or do yoga—all without interrupting the music. Moreover, Bluetooth plays your favorite songs over the system’s speakers, filling the room with richer sound than most smartphones, tablets, or laptops can.

Plays Music the Old-Fashioned Way, Too

When the playlist on your smartphone ends, keep the music going by switching to the built-in radio or popping in your favorite CD from your personal collection. The stereo can also play audio files stored on USB devices such as flash drives, and connects to non-Bluetooth audio sources with its auxiliary input (auxiliary cable required, not included)

About Toshiba

Toshiba manufactures a sweeping range of products, including TVs, medical imaging equipment, industrial motors, and HDTVs that are visible to ghosts. Though its production has become increasingly diversified, its corporate philosophy remains simple—Toshiba views itself as responsible for helping to create a safer, better world through innovation and technology. To this end, the company has launched its Toshiba Group Environmental Vision 2050, which has the primary goal of making the company 10 times more eco-efficient by the year 2050.

• 【164FT LONG RANGE】With Class 1 Bluetooth technology, the 1Mii Bluetooth receiver can achieve a range of up to 164ft (50m) line-of-sight in open air and up to 50-70ft (20-30m) indoors(without obstacles).
• 【Hi-Fi SOUND WITH 3D AUDIO】It features Bluetooth 5.0 chip to ensure high fidelity Bluetooth audio signal for music streaming to those speakers or home stereo systems that doesn’t have the capability. It also supports aptx and aptX Low Latency (aptx-LL). And the 3D audio can be switched on or off by pressing the “3D” button on the Bluetooth audio receiver. The green LED will be on when switched to 3D audio.
• 【POWER ON AND RECONNECT AUTOMATICALLY】When plugged into a power outlet, the Hi-Fi Bluetooth audio receiver can power on automatically and reconnect with the previously paired device.
• 【EASY SETUP, EASY TO USE】Easy plug, pair and play. This updated unit comes with a USB power adapter. Plug into computer speakers, home stereo systems or other speaker systems via the 3.5 mm or RCA cable, then pair with the Bluetooth audio devices such as smartphones or tablet. After that, you can enjoy the music. This product is a receiver only, NOT a transmitter.
• 【WORKS WITH VOICE COMMANDS】Connect this Bluetooth adapter to your speaker via a 3.5mm jack or RCA cable, pair the receiver with your Echo via Bluetooth on the Alexa app, it is easy to control your music with voice commands. Please make sure to use the audio cable to connect the Bluetooth receiver with your speaker, not with the Echo.

User questions & answers

Question:	can i send my music on my pc to my stereo with this device...and if yes how it work. Thanks in advance
Answer:	You can if your computer has bluetooth - just pair your computer to the device and have the device connected to your stereo, assuming that your stereo takes extra inputs such as aux, tuner or CD type inputs.
Question:	Does this supply audio output to both outputs (RCA and 3.5mm) simultaneously
Answer:	Saw question & got curious so... Plugged a pr of cheap headphones into the 3.5mm jack while simultaneously connected to a stereo & played a song using Pandora. The volume of stereo was immediately cut by around 50% & the sound level in headphones was really low.
Question:	does this one auto shutdown if not used for some hours
Answer:	You have to shut it off or it sits there and searches for a Bluetooth signal. It will auto connect with whatever device is available. I leave mine on so I can just auto connect when I walk into the house for music from my phone.
Question:	Cuts volume by about 40% ? Amazon wont let me review it due to lightning deal
Answer:	I have the very same problem. Before anyone jumps to a conclusion, here is my setup. B06 plugged into SONOS Play 5 powered speaker with iPhone X streaming directly over Bluetooth. Just switched out the B06 for another brand's streamer and no problem using normal volume settings... Using the B06 I have to quadruple the normal volume setting to get anything useable. And, yes, my Bluetooth source volume on my phone is turned up to max. Sound quality is very good, but having to juggle sound settings is very inconvenient and would prevent me from recommending this product.

Product features

1Mii B06 Plus Wireless Bluetooth Receiver(Upgraded Version)

This upgraded version Bluetooth adapter helps you get rid of wires and enjoy a high quality wireless music freely.

Why Choose Us?

-164FT Long Range for Bluetooth Music Streaming: The 1Mii Bluetooth audio receiver uses the most innovative Bluetooth technology. It implements the latest Bluetooth chip and the Low Latency technology that delivers the most superior sound quality. And it can achieve a range of up to 164ft (50m) line-of-sight in open air and up to 50-70ft (20-30m) indoors.

-Power On and Automatic Reconnection: The updated version will power on if you plug the Bluetooth receiver into a switch outlet and reconnect automatically with the previously paired device.

-Unique 3D Surround Sound Function: With the 3D audio button, you can switch to 3D mode to enjoy the surround sound with High Fidelity from a normal audio source. Its advanced internal chip takes charge of the conversion to make it possible, using convenient lossless codes.

-Dual Bluetooth Connectivity: This Bluetooth receiver can pair with two Bluetooth enabled devices simultaneously which allows you to play music from either your phone or tablet/laptop.

-One Upgrades All: With this Bluetooth audio adapter it is easy to play High Fidelity audio wirelessly from any Bluetooth enabled device including smartphones, tablets, computers, laptops upon any home stereo systems or speakers. And it is ONLY a Bluetooth receiver, to give Bluetooth capabilities to an existing stereo / powered speaker / PA, NOT a Bluetooth transmitter nor an amplifier.

NOTE: Please use 5V power supply! DO NOT use unmatched power sources (e.g., 9V /12V), which may lead to equipment failure!

3D Virtual Surround Sound

This Bluetooth Adapter brings home wireless to the next level that delivers an epic surround sound experience.

It supports the 360-degree sound reproduction of various movies, musical plays and more.

aptX Low Latency

aptX Low Latency audio technology delivers an exclusive listening experience with crystal clear, high fidelity music for room-filling sound.

Product description

Pioneer SX-10AE Home Audio Stereo Receiver. Listen to powerful, lively sound and dynamic bass with Pioneer SX-10AE stereo receiver. In addition to AM/FM radio entertainment, you can hook up a CD player and play albums, or a network audio player and enjoy music streaming services. Bluetooth Wireless Technology lets you easily stream songs from smartphones and tablets. FEATURES: Bluetooth Wireless Technology. Direct Energy Design for faithful reproduction of the audio content. Shorter transmission path, clean grounding and rigid structure with improved damping. Automatic and manual tuning; able to save up to 40 stations. Auto standby will automatically turn off after being left uncontrolled. 85 W per Channel (6 ohms), 45 W per Channel (8 ohms). Ver. 4.2, Profile: A2DP/AVRCP, Codec: SBC/AAC. Tone Controls: Bass (100 Hz)/Treble (10 kHz) +/- 10 dB. Frequency Response: Direct 10 hz-100 kHz, +1 dB/-3 dB.

• DIRECT ENERGY. The discrete amplifier inherits the Direct Energy Design for faithful reproduction of the audio content. A shorter transmission path, clean grounding and rigid structure with improved damping all help improve audio for quality sound
• BLUETOOTH COMPATIBLE. Seamlessly connect your phone, tablet or PC with Bluetooth Wireless Technology. This smart receiver remembers your device and starts playback when it detects incoming Bluetooth audio. Ver. 4.2, Profile: A2DP/AVRCP, Codec: SBC/AAC
• AM/FM TUNER. The automatic tuning feature lets you easily find stations in your area. Manual tuning is also available. You can save up to 40 stations on the receiver’s preset for quick access
• AUTO STANDBY. The SX-10AE will automatically turn off after being left uncontrolled for a certain time set by the user
• FEATURES. 85 W per Channel (6 ohms), 45 W per Channel (8 ohms). Tone Controls: Bass (100 Hz)/Treble (10 kHz) +/- 10 dB. Frequency Response: Direct 10 hz-100 kHz, +1 dB/-3 dB

User questions & answers

Question:	Can i use my sirius radio on this unit
Answer:	If its through your phone or some other Bluetooth device.
Question:	Bluetooth range
Answer:	I had to be directly in front of the receiver to sync. I could pick up music from my cell up to 50 feet before it started loosing the signal.
Question:	i noticed a l&r sub output. that means i can have a left and and a right sub added and get the stereo effect of the bass
Answer:	There is a single pre-out for connection to a powered subwoofer. You could use an RCA cable splitter if you really need two powered subs. However please note that due to the large wavelength (low frequency) of the sound waves in question the human ear is not sensitive to their directionality. That's just a matter of physics. Toward the other end of the frequency spectrum, sound waves are very dense and the human ear is hypersensitive to directionality; hence the popularity of 'point source' concentric drivers etc.
Question:	Can you send to a/b outputs at the same time, or do you have to use exclusively a or b
Answer:	If you are talking about playing speakers A and speakers B at the same time, then yes you can.

Product features

Direct Energy Design

Every inch of the chassis has been devised to create quality sound, such as shorter transmission path, clean grounding, and rigid structure with improved damping. The discrete amplifier inherits the Direct Energy Design of Pioneer’s high-end AV receivers for faithful reproduction of the audio content.

Bluetooth Wireless Technology

With the built-in Bluetooth Wireless Technology (ver. 4.2), you can easily stream songs from compatible devices such as smartphones and tablets. The SX-10AE features A2DP and AVRCP profiles, with support for SBC and AAC codecs.

AM/FM Tuner with Presets

The automatic tuning feature lets you easily find stations in your area. Manual tuning is also available. You can save up to 40 stations on the receiver’s preset for quick access.

Auto Standby

The SX-10AE will automatically turn off after being left uncontrolled for a certain time set by the user.

Product description

Pyle Model : PD1000BA

Home Theater Pro Audio Preamplifier

Bluetooth Home Theater Preamplifier - Audio/Video Receiver System with CD/DVD Player, AM/FM Radio, MP3/USB Reader (1000 Watt)

Features:

Audio + Video Home Theater System

Built-in Bluetooth for Wireless Audio Streaming

Connects to TVs Soundbars Speaker Systems

Powers up to Loud Speakers

Front Loading CD/DVD Player

4-Channel Receiver System

Front Panel Control Center with Digital LCD Display

AM/FM Radio with 50 Station Memory Presets

MP3 Digital Audio File Playback

SD Memory Card & USB Flash Drive Readers

Aux (3.5mm) Input Jack

Pair Speaker Terminal Binding Posts

Pair RCA (L/R) Audio Inputs

Subwoofer RCA (L/R) Output

Optical (Digital) Audio Output

1/4'' Microphone Inputs

1/4'' Headphone Jack

Video Outputs: S-Video RCA YPbPr (Component Video)

Output dB (Decibel) Level LED Display

Mic Echo Treble Bass Volume Subwoofer Controls

Built-in Ventilation Cooling Fan

Rack Mountable System

Bluetooth Connectivity:

Built-in Bluetooth Receiver for Wireless Music Streaming

Works with All of Today’s Latest Devices

(iPhone, Android, Smartphone, iPad, Tablet, Computer, etc.)

Bluetooth Wireless Network Name: PYLE

Bluetooth Version: 3.0

Bluetooth Wireless Range: Up to 35’ ft.

What's in the Box:

Preamplifier Receiver

Remote Control

Detachable Rack Mount Brackets

RCA Connection Cable

AM + FM Antennas

Power Cable

Technical Specs:

MAX Output Power: 1000 Watt

200 Watts x 2 @ 8 Ohm

360 Watts x 2 @ 4 Ohm

450 Watts x 2 @ 2 Ohm

Impedance: 8 Ohm

Aspect Ratio: 4:3/16:9

Video System: PAL/NTSC

Audio S/N Ratio: >90dB

Frequency Range: +/-14 dB

Integrated IC Radio Tuner

CD/DVD Disc Compatibility: DVD/CD/VCD/CD-R/CD-RW/MP4

Battery Operated Remote, Requires x ‘AAA’, Not Included

Power Cable Length: 4.9’ ft.

Power: 110/220 Volt Switchable

Dimensions (L x W x H): 16.9'' x 14.6'' x 5.7'' -inches

The Pyle Home Theater Receiver provides versatile audio and video entertainment. High-Powered stereo preamplifier performance comes loaded with audio playback features including front-loading CD/DVD player, AM/FM radio, USB & SD flash memory readers, aux (3.5mm) input and two 1/4'' -inch microphone inputs. Connect external surround sound speakers to create a cinema-style media experience in your living room. Bluetooth wireless receiver ability is compatible with all of today’s latest devices and features hassle-free setup for instant music streaming. Get connected to your entire home theater system including the TV, DVD player, soundbar, subwoofers and multi-channel speakers for full-ranged pro audio stereo sound enjoyment. Rear panel connector types include speaker terminal binding posts, RCA audio inputs, dedicated subwoofer output, digital optical audio output, component S-video connector -- along with a headphone jack for private listening. MP3 digital audio file support allows you to playback your entire digital media file library while you configure your sound via the front panel button control center. Enjoy versatile audio entertainment ability with the Pyle Bluetooth Home Theater Stereo Receiver System.

• 1000 WATT POWER: The Pyle 4 Channel Pre Amplifier is perfect for your karaoke and home entertainment sound system. It gives you 1000W peak power to be used for multi speakers with 2 8 ohms impedance allowing you to enjoy high quality audio
• 7 INPUTS: The personal digital amp box supports headphones, USB, iPod or MP3, FM tuner, AUX, with front loading CD DVD player, 2 microphone inputs with an echo effect for karaoke, 1 RCA preamp output and 2 mono RCA dedicated for subwoofer
• BLUETOOTH COMPATIBLE: The professional integrated indoor house stereo receiver is equipped with bluetooth wireless music streaming. Works with today’s latest devices including smartphones, tablets, laptops and computers w/ hassle free receiver pairing
• EQ CONTROLS: The speaker sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization and master volume adjustments. It also features blue LED illuminated buttons and knobs for high visibility
• DISPLAY METER: The compact and rack mount amplifier has a built in digital fluorescent display meter which displays all the functions and input used. A remote control is also included in the package for distant audio adjustments

User questions & answers

Question:	Can it be left outside under a covered patio
Answer:	Hi, yes as long as it is properly covered there. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PD3000BA for more details. Thank you.
Question:	can you hook a turntable to this
Answer:	Hi, that will depend on your turntable specs. Sometimes you have to use a phono or preamp for connecting a turntable to a receiver. You may use one of the audio input port of the unit for your turntable. Thank you.
Question:	Does the USB have shuffle or random play
Answer:	Hi, unfortunately no. The unit doesn't have a shuffle mode feature. Thank you.
Question:	Can i connect a tv to get sound on 4 speakers at once? how does the tv connect
Answer:	Hi, you may use RCA cable connecting this receiver to your TV. You can also use Bluetooth connection if your TV has a Bluetooth feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PD3000BA for more details. Thank you.

Product features

Home Theater Pro Audio Preamplifier

The Pyle Home Theater Receiver provides versatile audio and video entertainment. High-Powered stereo preamplifier performance comes loaded with audio playback features including front-loading CD/DVD player, AM/FM radio, USB & SD flash memory readers, aux (3.5mm) input and two 1/4'' -inch microphone inputs. Connect external surround sound speakers to create a cinema-style media experience in your living room. Bluetooth wireless receiver ability is compatible with all of today’s latest devices.

1000 WATT POWER

The Pyle 4 Channel Pre-Amplifier is perfect for your karaoke and home entertainment sound system. It gives you 1000W peak power to be used for multi speakers with 2-8 ohms impedance allowing you to enjoy high-quality audio

DISPLAY METER

The compact and rack mount amplifier has a built-in digital fluorescent display meter which displays all the functions and input used. A remote control is also included in the package for distant audio adjustments

BLUETOOTH-COMPATIBLE

The professional integrated indoor house stereo receiver is equipped with bluetooth wireless music streaming. Works with today’s latest devices including smartphones, tablets, laptops and computers w/ hassle-free receiver pairing

Speaker Output

Speaker Connectors to produce sound for listeners.

Cooling Fan

Expel warm air from inside.

Front Panel

Button Control Center to easily use the Amplifier.

USB Input

USB ports allow USB devices to be connected to each other.

• 【Ideal Choice for Music System】The bluetooth 5.0 audio receiver Skylark-2 was made to add hight quality high definition wireless music to any home or car music system. With simple setup (no apps/softwear needed) and auto pair mode, you can play any music with music system by streaming from any bluetooth enabled device such as your phone, tablet or laptop.
• 【HiFi Quality Sound】Latest version Bluetooth 5.0, LDAC/AptX-HD/AptX-LL/AptX/AAC/SBC codec makes it ability to deliver HiFi quality music, gives you music the way it was meant to be heard. Compatible with earlier version of Bluetooth devices.
• 【About TECH】This bluetooth 5.0 audio receiver build-in low latency class-leading stereo audio DAC PCM5122, CSR8675 chip, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. High gain antennacovers radius up to 30 meters.
• 【Plug and Play】Easy to setup and use, plug and play, fast connection. No apps, software driver, password, key or networking required. Once plugged in, the device automatically makes itself available to be paired.
• 【Output & Accessories】Supports a pair of gold plated RCA jacks(L/R) and a 3.5mm high-end headphone/AUX jack, Included 2 x RCA cables and 1 x Micro USB cable.

User questions & answers

Question:	is the ldac version available
Answer:	Si la recepción es excelente y la conectividad es muy sencilla.
Question:	Do you have to unplug it when not in used
Answer:	Has 32bit chip like any small audio device.
Question:	Se puede enviar la música vía bluetooth y conectarse vía bluetooth a dos bocinas, todo de forma inalambrica
Answer:	I would say at least 25 feet. Probably a bit more if there are no walls in between.
Question:	Which one is the ldac version
Answer:	That depends. Your speakers must have analogic inputs or outputs, either 3.5mm or RCA. I use a pair of enlarged computer speakers and a home audio system. Good results.

Product features

Bluetooth 5.0 Technology

Build-in CSR8675 chip, latest version Bluetooth 5.0 technology, low latency, with LDAC/AptX-HD/AptX-LL/AptX/AAC/SBC codec, ability to deliver CD-like quality, compatible with earlier version of Bluetooth devices.

Wide Compatibility

Works with phones, tablets desktop, laptop, wired speaker, preamp, amp, home stereo system car audio system or A/V receivers it goes well with all of them.

True HiFi DAC

Made by class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133.

30 Meters Cover Radius

High gain antenna for wide range, covers radius up to 30 meters.

InnoMaker - Skylark-2 Bluetooth Music Receiver

This bluetooth 5.0 audio receiver was made by class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133.

Bluetooth 5.0

Build-in CSR8675 chip, latest version Bluetooth 5.0 technology, low latency, with LDAC/APTX-HD/ATPX-LL/AptX/AAC/SBC codec, ability to deliver CD-like quality, compatible with earlier version of Bluetooth devices.

Ideal Choice for Home Audio & Car Audio

Supports a pair of gold plated RCA (LEFT&Right) jacks output and a 3.5mm high-end headphone jack output, flexible and easy access to any audio system.

Product description

Features desktop audio Mini power amplifier compact home Theater stereo receiver style built-in Bluetooth for wireless Music Streaming FM radio with LCD digital display ID3 tag song readout displays track title multi-channel audio input selection MP3 audio file Support connect & Stream Audio from external devices USB flash drive & SD Memory Card readers USB doubles as Device Charge Port aux (3 5mm) input 1/4'' Microphone input jacks pairs RCA (L/R) audio Input connectors pairs banana plug speaker output connectors pair RCA (L/R) audio output connectors front panel Audio Control Center radio station auto search scan 'repeat & random' Audio file Functions unique 'track/ Folder' Music search control knob treble bass Master & microphone volume adjustable.

• 200 WATT POWER The 2-Channel Pyle Bluetooth Stereo Amplifier Receiver is perfect for your karaoke and home theater acoustic sound system Gives you 200W power w/ 100W RMS accommodates 2 sets of speakers lets you enjoy high quality amplified audio
• 7 INPUTS The digital amp box supports various external sources - 2 RCA audio input for tuner CD player tape deck 2 1/4" microphone IN USB SD card 3 5mm AUX IN and FM radio antenna Features RCA audio output 2 pairs banana plug speaker output
• BLUETOOTH CONNECTIVITY The sound amplifying mixer device is equipped with Bluetooth wireless music streaming w/ 40+ ft wireless range Works w/ today’s latest devices including smart phone iPad iPhone and computer w/ hassle-free receiver pairing
• EQ CONTROLS The improved professional compact bookshelf sound amplifier features crisp responsive buttons for mode controls Rotary knob controls for mic echo / volume balance bass treble master volume input source and the unique folder/track
• DISPLAY METER The integrated receiver for home stereo has a built-in LCD display w/ front panel audio control center ID3 tag song readout displays track title FM antenna and remote control are included in the package for distant audio adjustments
• Included Components: Remote Controller

User questions & answers

Question:	how do you hook up an external antenna, my receiver is inside a metal building and I get very poor reception with the antenna provided
Answer:	Yes. This amp support 3.5mm AUX and Bluetooth input.
Question:	I have old but very good Pioneer speakers rated at 8 ohms impedance and 50 watt max output. Will this amp work okay with them
Answer:	Yes. I put my phone volume to max, then played through the speakers connected to the amp, and set the volume knob on the amp to what I wanted the max volume to be. My phone then controlled the volume from that max down to zero.
Question:	Do the left and right channels work correctly with am/fm tuner, bluetooth, and inputs
Answer:	You can use banana plugs or bare wire it.
Question:	What button or knob on the unit controls the FM radio tuning? I've read through the manual and no info on that
Answer:	Not sure how you have your cables attached but you Should have the left and right audio out Jacks from The tv going to the 3.5MM Aux in Jack on the amp. Of course this requires a cable with 2 rca plugs on one end and a 3.5MM plug on the other. This should work. Depending on the tv you can go into the settings to turn off speaker.

Product features

Compact Bluetooth

The Pyle Stereo Amplifier is the perfect solution for all of your audio needs! This versatile system is designed to perform and deliver clear, accurate sound.

It's loaded with plenty of audio playback options along with a wide range of device compatibility, so you can connect and play it all!

USB CONNECTOR

Amplifier for connecting. Pro audio pre-amplifier has FM radio tuning & unique recording mode that saves audio via USB/SD port. Pack w/ detachable hardware rack mounts for quick & easy assembly

200 WATT POWER

The 2-Channel Pyle Bluetooth Stereo Amplifier Receiver is perfect for your karaoke and home theater acoustic sound system Gives you 200W power w/ 100W RMS accommodates 2 sets of speakers lets you enjoy high quality amplified audio

7 INPUTS

The digital amp box supports various external sources - 2 RCA audio input for tuner CD player tape deck 2 1/4" microphone IN USB SD card 3 5mm AUX IN and FM radio antenna Features RCA audio output 2 pairs banana plug speaker output

EQ CONTROLS

The improved professional compact bookshelf sound amplifier features crisp responsive buttons for mode controls Rotary knob controls for mic echo / volume balance bass treble master volume input source and the unique folder/track

BLUETOOTH CONNECTIVITY

The sound amplifying mixer device is equipped with Bluetooth wireless music streaming w/ 40+ ft wireless range Works w/ today’s latest devices including smart phone iPad iPhone and computer w/ hassle-free receiver pairing

DIMENSION

compact size and measures 9.8” W x 3.9” H x 9.8” D, easy to bring anywhere it is needed. Can be used for indoor home and outdoor sound system applications