13 best helmet speakers

• Clean Sound, Clear Highs, Big Bass - OM BT01 is a wired chips equipped with optimally tuned 40mm drivers and CSR chip Bluetooth 5.0 for euphonious resonation with encrypted strong and stable connection ensuring an wonderful shredding journey on the slope.
• Skiing/Snowboarding Friendly Control - Three glove friendly buttons controls adjust volume, change tracks, play, pause, take calls and use Siri (voice control) through the built-in microphone.
• A Pair of Chips Understand Skier/Snowboarder - Built-in microphone allows you to get to jamming without missing anytime from the pow to answer missed calls when shredding & riding. Headphone can be charged directly without pulling off from helmet.
• Universal Helmet Compatibility - Minimal designed headset with 12.2 inch cord fits most audio ready ski/snowboard helmets including Giro, Smith, Burton, K2, POC, Anon and even motorcycle helmets.
• Rugged Design for All Conditions - OM BT01 wireless headphone made of IP45 sweat-resistance material and tested working perfectly at -20°C/-4°F. Up to 15 hrs play time & 500 hrs standby time.

User questions & answers

Question:	Do they work (play music over Bluetooth) while charging
Answer:	If the tire is 700x25, these tubes should fit. Make sure you inflate your tires to the recommended PSI. The word "race" is irrelevant...the tube and tire dimensions are what matter, along with proper inflation.
Question:	How long is the cord
Answer:	Check YouTube on how to install a tire. Yes, there is slack (assuming the slack is the circumference). You need to partially inflate the tube, put the stem through, then begin working the tire on. You can let more air out if you need room to get the sidewall in. It's not the easiest task, but it's definitely doable by yourself.
Question:	Does this install in the helmet or put them on your ears, then the helmet over
Answer:	They are smooth and hard to get my pump to stay on. I hate them.
Question:	Can anyone tell me how long they take to charge fully? Does the light change colors when it is fully charged
Answer:	I’m guessing you mean 60mm deep dish ? If so then the 80mm valve should be sufficient for your needs. You could also buy a valve extender that you move from tube to tube as you require

Product features

User Friendly Charging

Charging will never be this easy. You can charge the Bluetooth headphones for Audio-ready helmet without pulling it out.

Stable Audio Connection

OM BT01 Bluetooth Headphones featured with Bluetooth 5.0 tech ensuring stable and clean audio experiences.

Long Play & Standby Time

Optimized power consumption provide longer play time to 10 hours and standby time reaches up to 500 hours.

User questions & answers

Question:	Has anyone used these with an Oakley Mod 5 helmet? It has two small pouches but not sure if these speakers would fit
Answer:	Dont see why not.. nice sturdy helmet. Modular front snaps good it doesnt feel cheap like others.
Question:	Will these work with older iphones? Like the 4S and 6S
Answer:	Yes, all graphic of the SRT helmet are Snell certified.
Question:	Do these have an Aux port to connect your phone manually in case batteries die
Answer:	Didn’t buy the helmet for riding; I work on films for TV/movies and got it to attach camera pieces to it.
Question:	Would these work with a Giro helmet
Answer:	Yes the visor part goes up and you have the face open. Almost like a motorcross helment. I use it with my gaitor type mask without a problem.

Product features

COMPATIBLE WITH MOST AUDIO READY SNOW HELMETS

Universally compatible, Alta bluetooth headphones work with most audio ready helmet brands including Wildhorn (Checkout out our Drift helmet!), Smith, Poc, K2, Giro, Bolle, Anon, Burton and others. Just make sure your earpads are audio compatible and the Alta speakers will drop right in.

PREMIUM BLUETOOTH TECHNOLOGY

Shred the slopes listening to your favorite tunes in high definition sound with the Alta Bluetooth Audio system. Using 40mm Drivers and a premium Bluetooth 5.0 wireless chip set, the Alta wireless Bluetooth speakers deliver balanced dynamic sound with deep bass at any volume level.

ALL DAY PLAYTIME

The Alta is water, sweat and dust resistant with an IP45 resistance rating. They have been tested in extreme cold, -20 degrees Fahrenheit (-4 degrees Celsius). With 10 hours of playtime you can shred the gnar all day and never run out of juice for your tunes.

WILDHORN KNOWS SNOW

Designed in Utah by skiers and snowboarders that wanted a hassle free premium audio experience. You will never have to remove your phone from whichever coat pocket it's hiding in again. The Alta features 3 over-sized buttons (one on the Right and two on the left) so you can easily control almost every function of your phone without removing your helmet or gloves. Control the volume, change tracks, activate Siri or Google Voice, make calls, pause music and more.

COMPACT DESIGN

Alta versatile compact design allows them to be compatible with almost any audio ready ski or snowboard helmet design on the market. Simply slide the speakers into your helmets ear pad audio sleeves, run the connecting cord behind the padding at the back of the helmet and you're ready to shred the slopes.

BUILT IN HANDS FREE MIC

No more digging for your phone or taking off your helmet to make a call. Simply press the right button twice to activate Siri or Google Voice to make a call or change your playlist using the built in microphone. Dimensions in inches - 2.2H x 1.8W x .5L

HIGH GRADE MATERIALS & CONSTRUCTION

Alta Bluetooth wireless headphones are built to last. We use only premium quality materials, electronics and construction processes that have been meticulously tested to ensure they perform time and time again through the toughest winter conditions.

Product description

Specifications:

1.Bluetooth Version：V5.0+EDR CSR.

2.Frequency Respones:2.402Hz-2.480GHz.

3.Bluetooth Distance:20M.

4:MIC Distance≤1M.

5:Lithium Battery:3.7V/900mA.

6:Charging Time:2-3 hours.

7:Standby Time:500 hours.

8:Working Time:45-60 hours.

9:Bluetooth Matching Name:Helmet Headphone.



Q&A:

*Are earphones waterproof? What is the waterproof grade of the product?

YES.IPX7.



*What size are the ear speakers ?

The headphones are about 1.6 inches in diameter and about 0.5 inches thick.



*How to switch between Chinese and English?

How to switch the headset language: do not connect Bluetooth, double-click the power on button twice.



*The Headset have Wind noise.

Re connect to Bluetooth, and ride slowly when talking.



*Can the helmet Bluetooth headset answer the phone automatically?

Yes,It can answer automatically.



Package Includes:

1 x Helmet Hesdset

6 x Headphone VELCRO

1 x USB Cable

1 x User Manual

1 x Reflective sticker(Can be attached to a helmet or motorcycle to make it safer to ride at night.)



How to use?

Step1:Take out the Helmet Headphone from the color box,stick the"Magic Tape"on both earphones.

Step2:Tear off the 3M tape paper of the earphones,and sitck it into the helmet ear position of both sides,before stick it,please align the position well.

Step3:Stick the Helmet Headphones to the Velcro,Which is inside the helmet.

Step4:Finish installation.

• 【Bluetooth 5.0 and Effective Distance 20m.】One Helmet Bluetooth Headset wirelessly connected to two mobiles at the same time,Automatic connection and enjoy music,strong signal connection.Provide efficient and convenient communications in the riding.
• 【Long Play Time】Built in 900mAh rechargeable Li-ion battery,Long stand-by and working time.Support 50 hours continuous talking and playing time, 500 hours standby time.Charging time 2 hours.Support display battery on phone.
• 【Waterproof Technology】No disturb Dustproof and IPX7 Waterproof by using Nano coating technology,Can protect the headset safely in Outdoors.No worry about the rain or snow even.
• 【Perfect Sound Quality】By using windproof and more stable connection.DSP noise cancelling technology,Loud volume,this helmet headset transfers clear and high-quality stereo music sound.Compatible with all the smartphones with bluetooth function,MP3,GPS are supportable independently.
• 【EASY To In Stall】Design with detachable velcro,Easy to install it into the Helmet,fixed firmly. CE and FCC certification.【Customer Service】Guarantees 90 days no reason replacement or refund.

User questions & answers

Question:	Where is the charging light
Answer:	Dear customer, There is no phone app for this cam. Sincerely Byakov
Question:	How do I stop or disable incoming calls from automatically answering
Answer:	Dear customer, It is ok to use 16gb sd card. 32G and 64G is recommended. Sincerely Byakov
Question:	Following the instructions to turn off auto-answer isn’t working. How do I disable auto-answer
Answer:	No.
Question:	How long is the cable between the two headphones
Answer:	Yes, the Dash Cam 56 has GPS to record location information.

Product features

IPX7 Waterproof.No worry About the Rain or Snow.

Application scenarios.Motorcycle,Rock climbing,Skiing.Riding,Take-out and so on.

Suitable all Helmets.

Power indicator of headset.(Mobile Display)

By using windproof and more stable connection.DSP noise cancelling technology,Loud volume.

Connect 2 Mobile Phones,Support Display Battery on Phone.

Product description

The Sena SMH10 Motorcycle Bluetooth 3.0 Headset and Intercom was designed to keep you connected to your riding companions over longer ranges for conversation and music sharing--up to 900 meters (980 yards). When paired with a Bluetooth-enabled phone, it'll also let you make hands-free calls. The SMH10 features a Helmet Clamp Kit and Boom Microphone. The Jog Dial makes for an intuitive user interface that is much easier to control while riding. The Jog Dial default is volume control, and pushing the integrated button lets you cycle through all device functions with minimal fuss, which means you'll ride safer. The SMH10 delivers crystal-clear, natural sound through the stereo Bluetooth headset that gets an automatic boost in noisy environments while Advanced Noise Control technology cuts down on background noise for both incoming and outgoing audio. The Bluetooth music playback control features play, pause, track forward and track back functions, plus each audio source has its own adjustable volume level. Integrated voice prompts (available in English, French, German, Italian and Spanish) help you quickly learn your way around the device. You'll get up to 12 hours of talk time and 10 days of stand-by time on a single charge. And even if your companions don't have Sena gear, the SMH10 uses the Universal Intercom protocol, which allows your gear to work with theirs, regardless of brand.

• Long-range music sharing and intercom for motorcyclists--up to 900 meters (980 yards)
• Bluetooth 3.0 connectivity to listen to and share music, make phone calls with speed dialing, and participate in a four-way intercom conversation
• Advanced Noise Control technology cuts down on background noise for both incoming and outgoing audio.Do not use harsh chemicals,cleaning solvents, or strong detergents to clean the device
• Universal Intercom protocol for cross-brand intercom compatibility
• Up to 12 hours of talk time and 10 days of stand-by time on a single charge
• Note : SMH10-10 is not for the Bell Mag 9 and is meant to be secured via a clamp kit, which is not possible if you are using a half helmet.

User questions & answers

Question:	Does it work on a half helmet
Answer:	You can mount it on a half helmet but I'm not sure how well this can work. Some half helmets don't cover your ears, which will make it difficult to hear since the earphones are supposed to mount inside the helmet right where your ears would be. Also, you microphone will be completely exposed whereas on a full-face helmet, the microphone will be inside the helmet and blocking some of the wind noise. Hope this helps.
Question:	Is Amazon an Authorized Reseller of this item? The manufacturer will not honor the warranty from a non-authorized reseller
Answer:	The item seller is "David's Tools," not Amazon. You'd have to ask "David's Tools" if they are an authorized retailer.
Question:	Can 3 of us use these at the same time and all 3 talk to each other? Is there a push to talk, or is it live all the time
Answer:	Hi, yes 3 can use at the same time. I used with 4, and think that's the max. Also it's live, once you turn on its live, just talk. My bike is fairly loud and it works great.
Question:	Is this item waterproof
Answer:	It is water resistant, I've gotten drenched in the rain more than once and it is fine. It is not waterproof. Mine accidentally got submerged, game over.

• PROPRIETARY HDR AUDIO TECH: Unigear Bombing Wireless Ski Helmet Speakers make your music sound like the performer is right there beside you. Our HDR audio tech and 40mm high-efficiency drivers combine to deliver a premium acoustic experience. The stirring HDR tech automatically optimizes the lows and highs so music is always sound flawless at any listening level.
• GLOVE-FRIENDLY BUTTON SYSTEM: 3 simple button press combinations was designed to be easy-to-use even when you're wearing gloves, allow you to control every feature without ever removing your device from your pocket, easy to adjust volume, change, play or pause tracks or take calls and use Siri (voice control) through the built-in microphone. KEEP TALKING, KEEP MOVING!
• BLUETOOTH 5.0 / 32 FT. WIRELESS RANGE: A wireless Bluetooth 5.0 Chips offer you complete freedom of movement within a 32 ft wireless range. Once it's connected, is connected.
• UNIVERSAL HELMET COMPATIBILITY: Make sure your helmet is audio compatible, the speakers will effortlessly fit into your helmet slot. Compatible with the following helmets with audio insert slots: Bern, Giro, Smith, Anon, Pro-TEC, Bolle and more. Powered by a rechargeable lithium-polymer battery, it can play for 10 hours on a full charge, enough to speed you down a mountain all day.
• 365 DAYS 100% SATISFACTION: Unigear Bombing Wireless Audio Chips are designed to resist sweat and weather, they are rated IPX-4 sweat and water resistant, and thet work perfectly fine at the lowest temperature of -10°C/14°F. The unbreakable structure will minimize the damage from any activities, they built to last. If you have any questions, please feel free to contact Unigear customer service and we will contact you within 24hrs.

Product description

The Pulse drop-in speakers add hi-definition audio to just about any helmet. Featuring a universal fit, the Pulse plugs into most helmet communication systems, audio devices, and Smartphones that use a standard 3.5mm audio jack. The Pulse delivers crisp sound, extreme bass, and unsurpassed music quality. Drop-in the Pulse Speakers in minutes... your ears will thank you! Extreme Bass and Clean Sound: Our audio engineers worked feverishly on the Pulse to bring you high-fidelity sound in a convenient package. Pulse's sound drivers are designed for maximum performance and deliver the best sound in helmet audio and exceptional music playback. Easily Transfers From Helmet to Helmet: The Pulse design allows you to swap your speakers quickly from one helmet to another without tools. Stay connected to your music and phone calls as you switch from a morning ride on your board to an afternoon ride on your bike, and anywhere in-between.

• Upgrade your audio experience with the Pulse drop-in speakers from UCLEAR Digital
• Featuring a gold-plated, standard 3.5mm stereo audio jack and 40mm diameter driver
• Pulse speakers plug into most helmet communication systems, audio devices, and Smartphones
• High Fidelity Audio, gives you HD quality sound inside almost any helmet
• Includes speaker set and installation mount set

User questions & answers

Question:	I ride a fairly loud bike with aftermarked Cobra pipes. Do these speakers produce sufficient volume to overcome the bike/wind noise
Answer:	The speakers "fit", however They seem to be pressing on my ears and it triggers the button if nudged to pause / play. Will test them tomorrow but may be returning them sadly.
Question:	Does it come with velcro
Answer:	These should work with you Bluetooth enabled device
Question:	Can these work with iPod nano
Answer:	There is a port for charging so you could connect to a portable battery source. The batteries on these are excellent so you shouldn’t have any issues
Question:	Do these have volume and track change control on the cord
Answer:	It may vary how it fits depending on the model, but I believe it worked successfully with mulitple Giro helmets. The cord length is 9 3/4 inches. It should go along the back of your helmet once placed in correctly. The overall length from each ear piece end is 14 1/2 inches. Hope this helps!

Product description

With a standard 3. 5mm jack, these speakers fit practically any communicator on the market, no matter what brand. Owners of Cardo FREECOM and PACKTALK series will enjoy extra boost with new JBL sound processor and firmware. Not a FREECOM or PACKTALK owner? No worries: this powerful hardware will still drive your headset audio performance to new heights.

• Standard 3. 5mm jack, these speakers fit practically any communicator on the market, no matter what brand
• Owners of Cardo FREECOM and PACKTALK series will enjoy extra boost with new JBL sound processor and firmware
• Not a FREECOM or PACKTALK owner? No worries: this powerful hardware will still drive your headset audio performance to new heights.

User questions & answers

Question:	Does this come with attachments for inside the helmet
Answer:	I myself ride a very loud bike (Yamaha R6 with Coffman's slip on exhaust) and the Pulse speakers are sufficient for me. They will almost blow your ear drums out at full volume if stopped, so wind/exhaust noise shouldn't be an issue.
Question:	Can i connect this directly to my phone
Answer:	Yes, it comes with velcro.
Question:	What does single pack mean? Does single pack come with left and right speakers
Answer:	Yes, they will work with anything that has a standard 3.5 mm audio connection.
Question:	Will this fit my sena 20s
Answer:	These speakers do not have the volume/track control on the cord. The Pulse Plus speakers however, do have that feature.

• Performance: When properly installed, the audio volumes can reach as high as 100dBs. Enhance your helmet audio experience with ultra rich, high definition audio. The XSound 3 helmet speaker delivers full range clarity with solid clean bass and crisp highs, rivaling some of the best full sized headphones.
• Installation: Align the speaker correctly (touching and on top of your ear canal) and experience the ultimate audio clarity and volume. The XSound 3 kit includes high quality 3M velcro stickers that will keep your speakers stay in place in your helmet. There are also foam spacers and speaker covers to perfectly align the speaker as close as possible to your ears for the ultimate audio clarity and volume.
• Warranty: 30 days money back guarantee and 1 year limited manufacturer warranty.
• Compatibility: The XSound 3 helmet speaker uses a 3.5mm audio pin. Compatible with most bluetooth comms, smartphones and mp3 players. Please ensure that your device has a 3.5mm earbud jack/female plug.
• Dimensions: 45mm drivers tuned and packaged in a thin lightweight aluminum chassis (0.99cm/0.39" thin, 34g/1.2oz). Varied length Kevlar-reinforced wires stand up to 10lbs of pulling tension. Left wire - 40cm and right wire - 20cm for a tidy install.

User questions & answers

Question:	Can anyone recommend a really good Bluetooth adapter for this product? Don't care about price, just don't want to lose quality
Answer:	Hi, The 45mm JBL Audio Set will have all that you need to install it on the helmet.
Question:	Are these headphones compatible with a Sena 30K
Answer:	yes, if your phone has a 3.5mm jack (you'd need a lightning adapter for newer iphones)
Question:	Has anyone had success splicing the lines? My sena doesn't have a jack. Thanks
Answer:	Single pack means one Bluetooth unit. Yes they all come with left and right speakers
Question:	Are these loud enough at 60, 80, 100+ MPH
Answer:	Yes, this kit would plug into the 3.5mm headphone jack on the 20S mount.

Product features

Chassis + Dimensions

The XSound 3 Helmet Speakers represent the pinnacle of helmet speaker design. Utilizing the very best in materials to deliver the ultimate audio experience. Third generation helmet speakers beyond compare.

Ultra-slim 0.39” (9.9mm) acoustically tuned CNC all aluminum chassis (slimmest on the market) for sound perfection.

Dimensions:

0.39″ (9.9mm) thin, 1.77″ (45mm) diameter

Lightweight + Durability

Utilizes high grade aluminum chassis for a sleek, hyper lightweight (1.2oz, 34g) design.

High-end robust materials to meet the demands of activities like skydiving, hang gliding, paragliding, wingsuit flying and other extreme sports.

Behind-the-head wiring configuration allows the user to tuck the Kevlar reinforced cables behind the helmet lining for a clean installation.

Specifications

Max Power - 25 mW

Impedence - 60 Ohm

Frequency Range - 20Hz – 22kHz

Sensitivity - 125dB

Weight - 34g (1.2oz)

HD Audio - Full range hi-def sound

Compatibility - Angled 3.5mm pin

Connector - Gold plated connectors for increased audio performance

Wire Lengths - Kevlar reinforced wires for superior durability Left wire length: 40cm Right wire length: 20cm

Compatibility + Install

Can be installed in less than 5 minutes.

The helmet speakers come with premium 3M Velcro and foam spacers that offers a perfect fitment to the helmet you use. Simply attach it inside the helmet and position the speakers directly on top of your ear for the best audio experience.

The standard 3.5mm (1/8″) plug ensures connection with almost any mobile audio device.

For wireless application, the speakers are compatible with the IASUS Rekon helmet comm system, Stealth throat mic or other comms when directly plugged in.

What’s Included

• Speakers – Left and right speakers with premium 3M Velcro Adhesives
• Extension Cable – 3’4″ (1m) Kevlar reinforced 3.5mm extension cable for direct audio input.
• Foam Covers
• Comfort Fit Covers
• Foam Spacing Pads
• Unfold Ear Pad & Key Chain Fob

1. Test XSound 3 sound quality

Before mounting the speakers in your helmet, it is recommended to test and connect the helmet speakers directly to your smartphone or music player. Use the 3.5mm extension cable and hold the XSound 3 speakers to your ears as your music plays.

2. Find the perfect position on your ear

Position the XSound helmet speakers so that it is directly on your ear canal while wearing your helmet. You may need to make multiple adjustments until you reach the optimal positioning.

3. Make sure there is enough space in your helmet for the speakers

Certain brands of helmet and headgear are designed for a tighter fit and may not accommodate our speakers. Please determine whether your helmet can comfortably accommodate the extra 1/2 inch of helmet speaker on each side before your purchase. Modification to the helmet may be required.

• Compatibility: For devices with a 3.5mm audio pin. Compatible with most wireless Bluetooth comms (for Sena use the earbud port at the front of the mount) and mp3 players, smartphones (with a dongle) and other devices.
• Performance: The XSound 2.1 Helmet Speaker’s steel chassis provides exceptional bass response and full-range output. The speakers have been tested to have over 98dB volume levels (with proper install inside the helmet) which is at the threshold of damaging your ears if exposed to max volume for a duration of time (not recommended by IASUS).
• Installation: Align the speaker correctly (touching and on top of your ear canal) and experience the ultimate audio clarity and volume. The XSound 2.1 includes high quality 3M velcro stickers that will keep your speakers stay in place in your helmet.
• 30 days money back guarantee and 1 year limited manufacturer warranty.
• Specifications: Tuned 40mm drivers. Measures 1.77" (45mm) in diameter and 0.39" (10mm) thin with velcro installed Varied length Kevlar-reinforced wires stand up to 10lbs of pulling tension. Cable lengths (LEFT speaker: 40cm (15.8") RIGHT: 20cm (7.9"), with 100cm (40") extension cable.

User questions & answers

Question:	How long does the S20 battery last with these speakers
Answer:	https://www.amazon.com/TROND-Bluetooth-Transmitter-Indicator-Simultaneously/dp/B01K8ANDCI/ref=sr_1_4?s=electronics&ie=UTF8&qid=1528677736&sr=1-4&keywords=Trond
Question:	Is it compatible with sena
Answer:	We haven't tried it with the Sena 30K but if it has a 3.5mm output jack, then the XSound 3 will connect and most likely work with it. With regards to Braydon's comment, the Sena 20S has a 3.5mm output jack right on the clamp which is where our XSound 3 would plug into, therefore no adapter is needed. It's a very simple 3.5mm connection. We as well as 20S customers have tried it and they connect and play fine. Braydon, you contacted us originally reporting no sound but you had the XSound 3 connected to the AUX port and you also mentioned something about needing a female to female adapter. We don't know what kind of Sena 20S you had purchased or where you purchased it from, but we hope you got your money back for it. We didn't lie about needing an adapter, since it really doesn't need one. This is why we had kindly asked that you to remove your comment so you don't mislead others.
Question:	Why are cable lengths varied? Where is the expected output device (ie. phone, MP3 player, etc
Answer:	No. You've already spent $100.00 for this speaker upgrade. Now spend $34.00 and buy the Sena mount that has a jack. Then spend $3.99 for the PowerAmp cel phone app to deliver ultimate sound in your lid.
Question:	How do these compare to the tork x-pro speakers? those are ok, but after about 40-50 mph i can't hear them. any with direct experience
Answer:	Depends on your helmet and wind noise. Speaker placement is crucial. I've added a Lucid Labs battery operated amplifier that increases sound as well. 60, no problem, 80 gets tough to hear, 100 - I'm not paying attention to the music anymore... I'm using a bell bullit which isn't known for being quiet... Again, speaker placement to cover the ears is crucial...

Product features

Audio Range

Presenting the helmet speakers that focus your music inward while proclaiming your style to the world. The XS2.1 brings your music to life with depth and clarity that many helmet speakers can’t deliver. And they’re redesigned and engineered with a slim steel chassis for fitment for any helmet.

Volume will vary when used with Bluetooth motorcycle headsets. Volume level depends on your headset and if it has sufficient wattage to drive them. Tested performance output > 98dB; IASUS does not recommend long exposures at the highest volume as it may permanently damage your ears.

Chassis + Dimensions

The XSound 2.1 Helmet Speaker’s steel chassis with 40mm audio drivers inside provides exceptional bass response and full-range output.

Dimensions

1.77" (45mm) in diameter, 0.39" (10mm) thin

Kevlar reinforced wires for superior durability Left wire length: 40cm Right wire length: 20cm

Specifications

Max Power - 30 mW

Impedence - 32 Ohm

Frequency Range - 20Hz – 22kHz

Sensitivity - 125dB

Weight - 1.2oz (34g)

Connector - Gold plated connectors for increased audio performance

High Bass - Perfect for your audio

Compatibility + Install

Can be installed in less than 5 minutes.

The standard 3.5mm (1/8″) plug ensures connection with almost any mobile audio device.

The helmet speakers come with premium 3M Velcro that offers a perfect fitment to the helmet you use. Simply attach it inside the helmet and position the speakers directly on top of your ear for the best audio experience.

For wireless application, the speakers are compatible with the IASUS Rekon helmet comm system, smartphones (may need the 3.5mm dongle), mp3 music players and more...

What's Included

• Speakers – Left and right speakers
• Premium 3M Velcro
• Cable – 3’4″ (1m) 3.5mm heavy-duty extension cable
• Foam Covers

1. Test XSound 2.1 sound quality

Before mounting the speakers in your helmet, it is recommended to test and connect the helmet speakers directly to your smartphone or music player. Use the 3.5mm extension cable and hold the XSound 2.1 speakers to your ears as your music plays.

2. Find the optimal position on your ear

Position the XSound helmet speakers so that it is directly on your ear canal while wearing your helmet. You may need to make multiple adjustments until you reach the optimal positioning.

It is also recommended that the speakers touch the surface of your ears to avoid any loss of sound from the speakers.

3. Make sure there is enough space in your helmet for the speakers

Certain brands of helmet and headgear are designed for a tighter fit and may not accommodate our speakers. Please determine whether your helmet can comfortably accommodate the extra 1/2 inch of helmet speaker on each side before your purchase.

Modification to the helmet may be required.

**XSound 2.1 helmet speakers shown in the image above. Foam spacer can be purchased separately.

Product description

These are the chips 2 0 The universal wireless helmet audio system by outdoor Tech Connect them to your Bluetooth enabled device Drop them into your audio compatible helmet and your Skull will be dripping with undeniable melodies for the next ten hours Loaded with full audio controls phone call capability and voice command (Siri) power Do it all while keeping your mittens where they belong Waving in the air like you just don't care Imagine it warm hands fresh powder total audio and communication control and no wires inside your jacket

• 40mm drivers for clear Bluetooth wireless Audio for any Audio compatible helmet HELMET COMPATIBILITY The CHIPS 2 0 are compatible with helmets from the following manufacturers (and possibly more) as long as they have slots for audio drop-ins Bern Giro Smith K2 Anon Pro-Tec Technology Wireless
• Two-button glove-friendly controls adjust volume change tracks play pause take calls and use Siri (voice control) through the built-in microphone Bluetooth version is 4 0 Bluetooth profiles are a2dp arc and operating distance is 32 feet
• 10 hours of playtime on a single charge So you can ride all day listening to smooth Jazz without concern Rechargeable lithium-ion battery
• Sweat-resistant and fully functional in extreme cold weather (-20 degree/-4 Degree)
• Included components: USB charging cable, backup audio line- in cable w/controls, carry pouch, and instruction manual.

User questions & answers

Question:	Will these work with an Oakley Mod 5 helmet
Answer:	I don’t know, but for others...I believe he was asking how these speakers impact the Sena’s battery life compared to the original speakers. Difference in impedance results in more or less power drain from the Sena to drive the speakers. This is why pro sound systems have amps.
Question:	When I long press the left earpiece while music is playing, it is supposed to skip to the next song. But mine just powers off. Solution
Answer:	It's compatible with all Sena's that an audio Jack. The catch is that it is not compatible with the stock speakers so you can't do a duel system which is what I wanted. I wanted to run 4 speakers but once you hook up these speakers it kills the standard speakers.
Question:	Can one access Siri and ask questions
Answer:	The lengths are varied for a tidy installation in your helmet. It also comes with a 40" extension cable for use with smartphones and portable music players (that may be tucked in your pocket, etc).
Question:	what if i dont have service how would walki talki function work
Answer:	I use these on my yz450 dirtbike and my ninja. I don’t know about the Tork x-pros but I have run helmet speakers while riding and racing dirt bikes for the last 10 years and I have a pair of these in my dirt bike helmet and they sound great and so loud I turn them down a notch. Sometimes all you have to do for helmet speakers to get the loudness is pad them out closer to your ear and make sure there perfectly centered. When I mount speakers in my helmet I Velcro them in and then I take Velcro and stick a few same size pieces back to back and use them as Velcro shims put them behind the speaker till it’s almost too tight at the speakers to get my helmet on and the work amazing. If you don’t paid them out toward your ear even the best most expensive speakers there are you won’t be able to hear. I’d try that on your torks or maybe you already have but I am zero disappointed in these speakers I love them and reccomend them to friends and put them in my snowboard helmet too.

Product features

CHIPS 2.0

You’re looking at the CHIPS 2.0 universal wireless helmet audio system by Outdoor Tech: Bluetooth compatible in-helmet speakers with simple, glove-friendly controls for audio, phone, voice command (Siri). Your helmet just became your favorite piece of gear. You’re welcome.

TBT to when you used to have to carry your MP3 + your ear buds + your smartphone + heated mittens when you would go ride your local hill. Then remember that time when Outdoor Tech came out with a wireless helmet audio to make your snow trip stress free? No wires, no need to take off them gloves and you can leave your phone in your pocket.

Fully Wireless, And Universal

Works with nearly any audio compatible helmet, the CHIPS 2.0 stream music from your Bluetooth audio device, completely wirelessly. Each earpiece features a single oversized button that you can operate easily with your mittens still on. Simple button press combinations let you control every feature without ever removing your device from your pocket.

Clean Sound, Clear Highs, Big Bass

The CHIPS 2.0 come equipped with optimally tuned 40mm drivers to create incredible sound in your melon saver. You may not want to take your helmet off, ever. If this leads to people wearing lids on the street in the middle of summer, well, all we can say is: we set the trend.

It Isn't Magic... It's Science.

Blutooth technology allows your phone to wirelessly connect to the Chips 2.0 snow helmet speakers. Listen to music, make calls, and ride the mountain like a pro.

Built-in Call Functionality

The Bluetooth connection, built-in microphone, and simple button interface of the CHIPS 2.0 mean you can answer your next call without removing your helmet or gloves. No more fishing in your pants or pulling off your lid to tell your Ma you’ll be home in time for dinner. Just make sure you hang up before you start hassling ski patrol or debating skate laws with the police.

Helmet Compatibility

The CHIPS 2.0 are compatible with helmets from the following manufacturers (and possibly more), as long as they have slots for audio drop-ins: Bern, Giro, Smith, K2, Anon, Pro-Tec, Bolle

Product description

Superior quality sound

Built-in intelligent DSP Noise-Cancellation Chip, which reduces ambient noise, such as wind noise and engine noise.

Long battery life

Set-in rechargeable Li-ion battery, long stand-by time up to 360 Hours and working time is up to 20 hours after fully charged. Supports power display on iPhone, easy to know when it need to be charged. Built-in mini USB charging interface for quick and easy charging.

Easy to install

CHEERBEE’s Helmet Headset can fit onto various types of helmets. The standard clamp, included in default packaging, will fit onto most helmets.

Waterproof

IPX7 waterproof technology provides favorable waterproof, and resist sweat and dustproof effect, which can be used with confidence even on rainy or snowy days, making your outdoor riding more exciting.

What will you get?

1*Helmet Headphone

1*USB Charging Cable

1*User Manual

Specifications

Bluetooth Version: V5.0+EDR

Frequency Response: 2.402GHz-2.480GHz

Bluetooth Distance: 20M

MIC distance: ≤1M

Lithium Battery: 3.7V/400mA

Charging Time: 2-3 hours

Standby Time: 360 hours

Working Time: 20 hours

Bluetooth Matching Name: Helmet Headphone

Size: 400*230*10mm

Weight: 36.6 grams

Color: Black

Speaker size: 30mm in diameter

Charging voltage: USB5V

Speaker thickness: 30mm

Packing box size: 18x11.6x2.8cm

• 【Long Working Hours】 Equipped with a built-in 400mAh rechargeable lithium-ion battery in it, our motorcycle headset is featured by long standby and working time. It only takes 2 hours charging time to support 20 hours continuous talk and playing time, and 360 hours standby time. Also it can display battery power conditions on your mobile phone, which let you know when it need to be charged.
• 【Bluetooth Headset Version 5.0】 Bluetooth headset version 5.0 is compatible with most Bluetooth devices and can be paired in effective distance 20m with a strong signal. It supports simultaneous connections from 2 devices. Moreover, it can automatically answer calls during cycling which is efficient, convenient and fast. On the contrary, you can press any key for 2 seconds to hang up the call.
• 【Crystal-Clear Sound Quality & Handsfree】Adopting wind-proof and noise-reducing foam pads, the headset can connect devices more stably. DSP noise reduction and high volume make sure that helmet headsets transmit clear and high-quality stereo music sound for high speed riding. Besides, it is compatible with all smart phones with Bluetooth function. MP3, GPS can be also supported independently.
• 【IPX5 Waterproof Technology】With nano-coating technology, it is dustproof without interference. IPX5 waterproof technology protects headsets for outdoor use so that rain or snow will not affect the normal utility.
• 【Easy to Install and Widely use】 It adopts detachable Velcro design, 2 Velcro stickers in each set. Easy to install in the helmet, and can be fixed firmly. The 30mm speaker is more compatible with the helmet and can be used for outdoor sports such as motorcycle helmets, skiing, cycling, and rock climbing. No-reason replacement or refund is supported within 90 days after your ordering.

Product description

Vega's half helmet ear pads are designed to be used in any half helmet. These are easy to install and are available in basic or speaker pocket. The speaker pockets will fit most headphones. Vega products are backed by our 5 year manufacturer defect warranty, the warranty excludes wear and tear, any end-user modification, improper use or abuse, and/or crash damage.

• Easy to install
• Built in speaker pockets fit most headphones
• Great for added warmth, extending your riding season!!
• All Vega products are backed by our 5 year manufacturer defect warranty

User questions & answers

Question:	Is this for item for one pocket or two
Answer:	They should. I haven't personally tested it with the MOD 5 but the Chips 2.0 are designed to fit in most snow helmets.
Question:	Are these sold as a pair or individually
Answer:	Hello and thank you for asking Snow Sports about the operation of the Outdoor Tech bluetooth speakers. We have double-checked on a set here, and find that if you hold the left button for about 3 seconds (don't wait for the song to advance...hold 3 seconds, then release) the song should advance to the next song. If you hold down longer, as if waiting for the next song to begin, it will power down.
Question:	Is this version the speaker pocket version
Answer:	Yes, by holding down both the left and right buttons.
Question:	Are these too hot to use in summer
Answer:	Simple answer: it won't. The walki-talki function uses your cellular service. From the MFG site on this feature: "And since it uses your cell network, the range is truly limitless (provided you got bars)."

Product description

The incredibly powerful BE - LINK Bluetooth Sound System for your helmet integrates with all BE Headwear Bluetooth beanies and any helmet - full face, skate, dirt - absolutely any helmet. Features superior audio quality, and style unlike any other. It's now time to spread the love to every season - backed with a Lifetime . Listen to music, talk on the phone, BE yourself with BE Headwear Generation 3. 0 premium Bluetooth products.

• Comes with BE-LINK System, Micro USB charge cord, DCV helmet hook and loop mounts, and a lifetime .
• Now with 9 hours of battery life before recharging
• G3 Tech Bluetooth 4. 0 with built in microphone for hands free calling
• Step-by-step Voice Prompts for a truly hands-free experience
• Ultra loud speakers with 30 mm speaker drivers and ultra slim, durable design with origami acoustics

User questions & answers

Question:	Has anyone else experienced significantly different volume levels between the left and right
Answer:	They will fit either one or two headphones, just depends which type you bought. If you purchased a headphone that is just for one ear, then you just put the headphone in one of the pockets, of the kit you bought had two headphones, then use both pockets, it had two pockets, so it will work with two or with one headphone...
Question:	Can you control these with an Apple Watch
Answer:	It sold as pair :)
Question:	Are they waterproof so i can use them snowboarding
Answer:	Yes
Question:	Does this support voice command or you have to control it with phone
Answer:	I find them to be rather comfortable... and not to hot... great for reducing wind and noise.