12 best wireless access point poes

A Wireless Access Point with Power over Ethernet (PoE) support is a networking device that allows you to connect wireless devices, such as laptops, smartphones, and tablets, to a wired network using Wi-Fi technology. PoE technology enables both data and power to be transmitted over a single Ethernet cable, simplifying the installation process and reducing the need for additional power outlets.

Here are some key points about Wireless Access Points with PoE:

  1. Wireless Connectivity: These devices create wireless networks, enabling multiple devices to connect to the internet or a local network without the need for physical cables.

  2. PoE Capability: The PoE feature allows you to power the access point through the same Ethernet cable that carries data. This is particularly useful when the access point is located in a hard-to-reach area where power outlets are scarce.

  3. Installation Flexibility: PoE support eliminates the need for a separate power source near the access point. This makes it easier to install access points in locations like ceilings, walls, or outdoor areas where traditional power sources may not be available.

  4. Centralized Management: Many Wireless Access Points with PoE support can be centrally managed through network management software. This allows administrators to monitor and control multiple access points from a single interface.

  5. Security Features: These access points often come with security features such as WPA/WPA2 encryption and MAC address filtering to secure your wireless network from unauthorized access.

  6. Scalability: You can expand your wireless network by adding more access points, creating a larger coverage area or increasing the capacity of your network.

  7. Business and Home Use: Wireless Access Points with PoE are used in both home and business settings.In homes, they provide Wi-Fi coverage throughout the premises, while in businesses, they are used to provide reliable and secure wireless connections to employees and guests.

  8. Speed and Standards: These devices support various Wi-Fi standards, such as 802.11ac or 802.11ax (Wi-Fi 6), which offer different speeds and performance levels. The choice of standard depends on your network requirements.

  9. Guest Networking: Many access points offer guest network features, allowing you to provide internet access to visitors without giving them access to your main network.

  10. Quality of Service (QoS): QoS features help prioritize network traffic, ensuring that critical applications get the bandwidth they need for optimal performance.

Wireless Access Points with PoE support are an essential component of modern networking, offering convenience and flexibility in establishing and expanding wireless networks. They are commonly used in offices, schools, hotels, and homes to provide reliable and secure wireless connectivity.

Below you can find our editor's choice of the best wireless access point poes on the market
  

TP-Link Omada AC1350 Gigabit Wireless Access Point | Business WiFi Solution w/ Mesh Support, Seamless Roaming & MU-MIMO | PoE Powered | SDN Integrated | Cloud Access & App for Easy Management (EAP225)

TP-Link

Based on 2 reviews Check latest price

Product description

EAP225 supports both 802.3af PoE and passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible.



Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.



MU-MIMO capability requires client devices that also support MU-MIMO.



Seamless roaming requires both the access point and client devices to support 802.11k and 802.11v protocols.

  • 【Superior Speeds with MU-MIMO】Designed with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225 reliably delivers dual-band Wi-Fi speeds up to 1350 Mbps to multiple devices at the same time.
  • 【Integrated into Omada SDN】Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways. Pick your preferred method of network management from these Omada offerings - Omada hardware controller, Omada software controller or Omada cloud-based controller. Standalone Mode also applies.
  • 【Cloud Based Controller】Zero-Touch provisioning (coming soon) allows remote deployment and configuration of multi-site networks. AI-Driven Technology (coming soon) delivers stronger performance and easy network maintenance. Additional fees apply for use of cloud-based controller.
  • 【Cloud Access】Remote Cloud access and Omada app brings centralized cloud management of the whole network from different sites—all controlled from a single interface anywhere, anytime.
  • 【SDN Compatibility】For SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN APs, Switches and Routers. Non-SDN controllers work only with non-SDN APs. For devices that are compatible with SDN firmware, please visit ‘From the manufacturer – Q&A’ section or tplink website.
  • 【Advanced Wireless Tech】Support Mesh WiFi, Seamless Roaming, Band Steering, Airtime Fairness and Beamforming technologies.
  • 【Multiple PoE Options for Easy Installation】EAP225 supports both 802.3af/at PoE and Passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible.
  • 【Limited Lifetime Warranty】Backed by our industry-leading limited lifetime warranty and free 24/7 technical support, you can work with confidence.

Product features

Seamless Roaming

Seamless roaming switches clients to the AP with the best signal automatically, even when moving. This allows sensitive applications like VoIP and video conferences to go uninterrupted.

Omada SDN with Flexible Management and Cloud Access

Omada SDN integrates network devices including access points, switches & gateways with multiple control options provided - Hardware controller, Software Controller & Cloud-based Controller. Centralized cloud allows for remote management of the entire network via a single interface anywhere, anytime.

Cloud-Based Controller Unlocks More Possibilities

Zero Touch Provisioning (coming soon) allows for remote deployment and configuration of multi-site networks. AI-Driven technology (coming soon) delivers stronger performance and easy network maintenance.

Both require the use of cloud-based controller.

NETGEAR Wireless Access Point (WAX610PA) - WiFi 6 Dual-Band AX1800 Speed | Up to 250 Devices | 1 x 2.5G Ethernet LAN Port | 802.11ax | Insight Remote Management | PoE+ or Included Power Adapter

NETGEAR

Based on 502 reviews Check latest price

Product description

Equipped with the latest and fastest WiFi 6 (802.11 AX) technology, WAX610 is a wireless access point built to provide your small and medium business with next-level coverage, ease of installation and management, and connection capacity for a high-performance business-grade WiFi experience, today and tomorrow.

  • MULTIPLE DEVICE PERFORMANCE: WiFi 6 Dual-Band AX1800 speed, coupled with MU-MIMO technology, supports up to 250 client devices.
  • MULTI-GIG ETHERNET PORT: Connect up to a 2.5G Ethernet switch for maximum speed.
  • PoE+ or AC POWERED: Simplifed deployment with PoE+, or power using the included PAV12V power adapter.
  • LOCAL AND REMOTE MANAGEMENT: Includes 1 year FREE Insight subscription for remote management from anywhere, and no additional hardware or cloud key required. Setup, configure, and manage with the Insight app.
  • FLEXIBLE MOUNTING: Easy to securely install on the wall or a suspended ceiling with included hardware.
  • BUSINESS CLASS SECURITY: Includes WPA3, network and client isolation, and rogue AP detection.
  • ADVANCED TECHNOLOGY: Including load balancing, band steering, and assisted roaming.
  • WiFi BRIDGE MODE: Extend your network wirelessly between buildings or nearby locations point-to-point or point-to-multi-point.

User questions & answers

Question: Can wac540 work with poe of gc110p switch
Answer: I see there's no answers so I wouldn't let that stop me from purchasing the set, I wouldn't think so.
Question: Can it work as an extender of wnd930 ap
Answer: Natural Boars Bristles
Question: So if one wanted a single ethernet port for a hard wired device, would the lan2 plug work? or do i need a separate router outside of this
Answer: Yes , they can be used in the shower ,they also can be for dry skin.
Question: How do they comapre to uibiqiti unifi uap-ac-pros or uap-ac-lites
Answer: I don't recall & it's not printed on the brushes but I know I haven't had any problems like I read on here of bristles coming out, I have uses for all 3 brushes & don't regret my purchase at all. (the box is printed recyclble)

Linksys LAPAC1200C AC1200 Wireless Access Point for Business (Cloud Management PoE WiFi Access Point),White

Linksys

Based on 192 reviews Check latest price

Product description

The Linksys Business LAPAC1200C Cloud Wireless Access Point delivers wireless data transfer rates of up to 1.17 Gbps and includes Linksys Cloud Manager, our web-based Wi-Fi Network Management solution. Cloud Manager lets you remotely manage multiple networks, access points and clients from one centralized and easy-to-use dashboard that’s accessible anytime, from any device. Cloud Manager will alert you to any network problems. You can access it from any computer, tablet or mobile phone and easily get real time statistics on the health of your network. The Linksys LAPAC1200C can be set to adopt the configuration of other access points and can be pre-configured before it is turned on for rapid deployment. A 5-year Linksys Cloud Manager license is included at no additional cost. When it expires, you can choose to purchase the license for an additional five years.

  • Manage your network’s wireless access points remotely through Cloud Manager
  • Easy to use, centralized, browser based dashboard
  • Dual band (2.4 gigahertz + 5 gigahertz) data transfer speeds upto 1.17 Gigabits per second
  • PoE+ (Power over Ethernet Plus) compatible for streamlined installation
  • Protects your data with advanced business class security features
  • Zero touch provisioning (configuration) allows for rapid deployment

User questions & answers

Question: Will this extend my signal if connected via cat6 to my asus ac3200? will i be able to keep network name and password same for seamless transition
Answer: I can not say with a specific model. As long as it is true POE with sufficient output per port then it should. I use mine with a BV Tech 8 port POE switch that has 130W Max Power (up to 30W per port) and this works perfectly with the POE line extended 100 ft per line.
Question: will this unit work seamlessly with the fios home router model: g3100 wi-fi 6 (802.11 ax) or are additional accessories required
Answer: I don't know the precise definition of "extender", but I know that you can set up two WAC5xx units in bridge mode, with one connected to the wired network and one freestanding, to "extend" your network. If there is a bridge mode option on the wnd930 ap, it may be compatible.
Question: Does the AC1200 access point have to be powered by poe or is it a led to be plugged in to an outlet
Answer: Yes, the second port can be used to connect to another device. I have a cat8 Ethernet cable coming from the second port to a 1 gb switch and have three other computers connected to that switch and the throughput is 1000mbs just as it is from the switch that this access point is connected to. No speed loss. My cable from switch that has xfinity internet up to the Netgear access point is cat7 heavy duty outdoor. I have had no issues or drops in speed.
Question: How many devices can this support, I saw a stat that said only 32 this seems low
Answer: WAC510 has better rateVsrange than uap-ac-lite and uap-ac-lr. WAC540 is a 4x4 and is better than uap-ac-pro.

Product features

Linksys Business AC1200 Dual-Band Cloud Wireless Access Point

Upgrade the WiFi connectivity in your place of business with the Linksys Business AC1200 Dual-Band Cloud Wireless Access Point (LAPAC1200C). Well-suited for high-density wireless environments, the LAPAC1200C delivers combined speeds of up to 1.17 Gbps* for high-bandwidth activities such as video conferencing and cloud storage. It also features Cloud Manager, a centralized cloud management system that allows you to easily monitor multiple access points, sites, and clients via an easy-to-use, browser-based dashboard.

  • Remote Access: Monitor your networks from anywhere at any time
  • Network Insight: View real-time statistics on network activity and health

Cloud Manager

The Linksys LAPAC1200C Wireless Access Point is built with Cloud Manager to help greatly streamline network management. Perfect for managing multiple accounts and networks, this browser-based cloud management system allows you to remotely monitor and manage all networks and access points in real time. Cloud Manager also generates real-time statistics to help you analyze network activity and health. By leveraging the cloud, your business can reduce the cost of on-site management.

  • Zero-Touch Provisioning: Access points automatically connect and configure when activated, allowing for rapid deployment
  • Centralized Management: Manage multiple sites from a centralized platform
  • Global Map View: Worldwide view of accounts and their networks, sites, devices, and clients + alerts within the map

TP-Link Wireless N300 2T2R Access Point, 2.4Ghz 300Mbps, 802.11b/g/n, AP/Client/Bridge/Repeater, 2x 4dBi, Passive POE (TL-WA801ND),White

TP-Link

Based on 6 reviews Check latest price

Product description



Model



Spec



Features



Manufacturer Warranty

  • 300Mbps wireless transmission rate, brings smooth wireless N experience
  • Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
  • Easily setup a WPA encrypted secure connection at a push of the QSS button
  • Up to 30 meter (100 feet) Power over Ethernet capability for flexible deployment

User questions & answers

Question: Is it possible to replace one of the omni directional antenna with an RP-SMA cable from one of those 24dbi antenna and use this AP as a repeater
Answer: You would need a Powered Antenna adapter. Basically the powered antenna hooks to the RP-SMA slot, then has the powered hub, and then you put a % dbi antenna on it and it'll get 2x more antenna strength. Even 2x more then what you'll use for a higher DBI antenna. So if you use a 24dbi antenna, it'd more be like a 48dbi antenna. So if you use double 10dbi antennas with the power adapter. that'll be more then enough to have signal strength to get all the house at max, even if
Question: Confused. It says "wireless" but yet asks to be hooked to computer. Can someone explain please
Answer: This is a wireless access point not a router, that means that it only provides a wireless signal for computers, tablets phones etc. It must have a wired connection to it from the internet. It does not have a firewall so if you have a internet connection only at this time you should get a model with a router/firewall not this model.
Question: Can this access point have the same SSID as my main router in order to be able to access the same network
Answer: It's going to be connected to the same network and can have the same SSID. I use mine as an access point at the other end of the my house and gave it a slightly different name so I would know which device (my router also has wireless connectivity). I could always look at signal strength and tell the difference, but I like the slightly different name.
Question: I need to have internet in a device that only takes ethernet.Can this device pick the wireless signal and give internet to my device using ethernet
Answer: Also note that the ethernet port is only 100Mbit. So if your existing WiFi is usually capable of more than 100Mbit, for example your WiFi internet is 150Mbit or more, you will only get around 100Mbit or a little less to your ethernet device. You'd have to pay a little more money for a different device with a GigaBit ethernet port if you want to get anything more than 100Mbit out of this ethernet port.
Question: The description states it has four antennae to give it an extended range, but the picture does not reflect that information. Where are they
Answer: Hi, Dave. The antennae of the Linksys EA2700 is installed inside the router.
Question: My question is this router compatible with spectrum/time warner
Answer: yes - have had it for over a year no problems, added an extender and still doing well

Product features

Wireless N - Speed & Range

Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes- Easy to Build WLAN

Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported- More Flexible Deployment

The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

Cisco Business 240AC Wi-Fi Access Point | 802.11ac | 4x4 | 2 GbE Ports | Ceiling Mount | Limited Lifetime Protection (CBW240AC-B)

CISCO DESIGNED

Based on 26 reviews Check latest price

Product description

The Cisco Business 240AC Access Point delivers high density MU-MIMO (4x4) wireless connectivity for small offices. Designed with simplicity, flexibility and security in mind, the Cisco Business 240AC provides superior performance and enhanced range for an optimal user experience.



Compatible with Cisco Business 100 Series Mesh Extenders to rapidly expand your Wi-Fi network.

  • PERFORMANCE: Superior MU-MIMO (4x4) performance supporting up to 200 wireless devices and a maximum wireless coverage up to 3000 square feet
  • DEPLOYMENT: Flexible deployment wall or celling mount (brackets included). Works also with Cisco Business Power over Ethernet injector (CB-PWRINJ)
  • ENHANCED COVERAGE: Supports up to 25 mesh extenders while delivering a reliable user experience
  • SET UP IN MINUTES: Simplify management and monitor your network from Cisco Business Mobile app or web browser
  • ADVANCED SECURITY: Enterprise-class security prevent malware, phishing, and other threats from compromising your network via Cisco Umbrella integration
  • NETWORK ACCESS: Prioritize network access based on use cases (i.e. point of sales system, surveillance) or guest privileges
  • PEACE OF MIND: One-year technical support and limited lifetime warranty

User questions & answers

Question: Is the cbw240ac access point dust tight
Answer: Hi. You may use the LAPAC1200C to extend the wireless coverage of your existing network and for increasing the number of users that can connect to it. We also don't have an access point that has a seamless roaming feature. You can consider looking into an extender with the roaming feature instead.
Question: Does it need a license
Answer: Hi. No, the Linksys LAPAC1200C does not support seamless roaming. Also, the router only supports Wi-Fi 5.
Question: If I need warranty service, who would I contact
Answer: The Linksys LAPAC1200C comes with a 12V, 1.5A power adapter.
Question: Is the 240AC equipped with both wifi radios 2.4ghz and 5ghz
Answer: Hi! This supports up to 32 devices per radio.

Product features

Simple

Intuitive web and mobile network management tools allow for set-up in minutes and simplified, ongoing operations, freeing up valuable time and resources for growth and profitability.

Flexible

Customizable switching, routing, and wireless solution catering to every stage of your business. Extensive portfolio addresses your technical and budget requirements.

Secure

Built-in security, including Cisco Umbrella, mitigates costly breaches while protecting privacy.

Mobile App

The Cisco Business mobile app simplifies the set-up, management, and monitoring of Cisco Business Wireless access points and mesh extenders.

Switches

High-performance switches with a powerful feature set, purpose-built for small businesses.

Routers

Business-class routers with VPN and firewall support ensure network security and privacy.

Wireless Access Points

Powerful 802.11ac access points deliver simple, secure Wi-Fi connectivity to your employees and customers.

Ubiquiti UAP-AC-LITE UniFi AP AC LITE 802.11ac Gigabit Dual-Radio PoE

Ubiquiti Networks

Based on 1 reviews Check latest price

Product description

Ubiquiti UAP-AC-LITE UniFi AP AC LITE 802.11ac Gigabit Dual-Radio PoE OPEN BOX

  • Ubiquiti UAP-AC-LITE UniFi AP AC LITE 802.11ac Gigabit Dual-Radio PoE OPEN BOX

User questions & answers

Question: Should i get the lite or pro version if i live in an apartment with a lot of interference
Answer: The Cisco Business 240AC access point is designed for indoor usage only and has no IP code rating (Ingress Protection Code), therefore is not IEC 60529 compliant. Operating temperature is 32° to 122°F (0° to 50°C) and Operating humidity is 10% to 90% (noncondensing). More about the compliance standards for the Cisco Business 240AC you can find at: https://www.cisco.com/c/en/us/products/collateral/wireless/business-200-series-access-points/smb-01-bus-240ac-ap-ds-cte-en.html (product specification section)
Question: Does it support n/g/a/b protocols also or just ac
Answer: No license is required for using this product.
Question: Does the unifi manager server have to be on 24/7 in order for the timed access feature to work? e.g. m-f 7am-10pm turn wifi on
Answer: In case of any hardware or configuration issue, you can contact the Cisco STAC centre for further assistance. Contact details are as follows: https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Question: Does it come with PoE injector for the single unit and what are the Voltage ratings
Answer: Yes, the Cisco Business 240AC is a dual radio wireless access point and can operate on 2.4 and 5GHz simultaneously. More information about the product you can find on following link https://www.cisco.com/c/en/us/products/collateral/wireless/business-200-series-access-points/smb-01-bus-240ac-ap-ds-cte-en.html

NETGEAR Wireless Desktop Access Point (WAX214PA) - WiFi 6 Dual-Band AX1800 Speed | 1 x 1G Ethernet PoE Port | 802.11ax | WPA3 Security | Up to 4 Separate SSID Networks | with Power Adapter

NETGEAR

Based on 6 reviews Check latest price

Product description

The NETGEAR WAX214 WiFi 6 AX1800 PoE Wireless Access Point delivers high-performance WiFi for customer-facing or home office locations. It is ideal for retail showrooms, lobbies and waiting areas at healthcare and other professional offices and more. This access point is engineered with the latest WiFi 6 technology for performance, coverage and security to keep your guests and customers connected, while keeping your back-office network separate and secure.

It is designed with PoE to be easy to install with a single cable to your PoE switch or router, and mounts to a ceiling or wall to be less visible and secure for customers. Affordable, easy to setup and backed by an industry-leading 3-year hardware warranty.

  • PRIVATE AND SECURE WIFI NETWORK: Easy to install in a retail store, business lobby, or any location where you want a dedicated, secure WiFi network.
  • WIFI 6 PERFORMANCE: Dual-Band AX1800 speed and capacity, coupled with MU-MIMO technology, supports up to 128 client devices.
  • PoE or AC POWERED: Simplified deployment with PoE, or power using the included PAV12V power adapter.
  • SIMPLE TO MANAGE: Setup, configure, and manage with the instant setup wizard.
  • BUSINESS CLASS SECURITY: Supports WPA, WPA2, and WPA3.
  • FLEXIBLE MOUNTING: Easy to securely install on the wall or ceiling with included hardware.

Product features

Waiting Lobby

Perfect for an extended network at a distance from the main wireless router. Create a separate, secure wireless network for any single room area.

Retail Storefront

Provide separate, secure WiFi for customers and employees.

Public Space

Integrate secure, performance WiFi into any business public space location.

Control Wireless Device Access

Supporting multiple SSIDs, the WAX214 delivers up to 4 separate and secure wireless networks to protect and manage device access.

Flexible, Discreet Mounting Options

Easy installation on a wall or ceiling provides the optimal WiFi network coverage in an out-of-the-way location.

Easy Setup Wizard

The NETGEAR setup wizard makes setup and configuration simple.

JOOWIN AC1200 High Power Outdoor Wireless Access Point with Poe, 2.4GHz 300Mbps or 5.8GHz 867Mbps Dual Band 802.11AC Wireless WiFi Access Points/Router/Bridge/Repeater, Used for Outdoor WiFi Coverage

JOOWIN

Based on 701 reviews Check latest price
  • 2.4GHz and 5GHz High Transmission Power: Supports the latest 802.11ac Wi-Fi standard, which is 3 times faster than Wireless-N. A dual band range extender can boost your existing wireless coverage with speed of up to 867Mbps on 5GHz, 300Mbps on 2.4GHz. Adopts QCA9531 + QCA9886 dual Qualcomm chips from USA, which ensures more stable performance.
  • High Gain Antennas Provides a Long-range Coverage Area: 2*5dBi Omni-Directional antennas provides 360° network coverage, receiving wireless range becomes wider and more stable. Ideal for extending wifi to backyard/garden/outhouse/pool. Both 2.4G and 5.8G are applied with power amplifier which can improves wireless network reception and transmission function.
  • Multiple Operation Modes: The CF-EW72 supports AP/Router/Bridge/Repeater Mode. AP mode (Set up as an outdoor wireless access point) is recommended for bigger yard. Router mode (Set up as an outdoor wireless router) is recommended for midsize yard.
  • Built for Outdoor Wi-Fi Coverage: IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture. Lightning Protection, Waterproof, Dustproof, Antifreeze, High-Temperature Resistant, Antioxidant, ensures stable connection in harsh outdoor conditions.
  • 802.3af/802.3at/PoE Power (PoE Adapter Included) over Ethernet support and simple mounting design allows for flexible deployment and convenient installation.

Product features

JOOWIN AC1200 High Power Outdoor Wireless Access Point with Poe

  • Adopts QCA9531, QCA9886 dual Qualcomm chips from USA, ensures more stable performance.
  • It will automatically select better channel based on the environment, avoiding interference from same frequency.
  • Dual-Band Speed up to 2.4GHz 300Mbps, 5GHz 867Mbps
  • Supports the latest 802.11ac Wi-Fi standard, which is 3 times faster than Wireless-N.
  • 48V PoE Support for Flexible Deployment and convenient installation.
  • Provides high performance at a Long-Range Links, depending on its dual antennas.
  • IP66 Robust weatherproof case withstands harsh outdoor conditions.

High Power AC1200 Dual Band WiFi Access Point

With combined wireless speeds of up to 2.4GHz 300Mbps or 5GHz 867Mbps, Simple tasks like sending e-mails or web browsing can be handled by the 2.4GHz band while bandwidth-intensive tasks like online gaming or HD video streaming can be processed by the 5GHz.

Both 2.4G and 5.8G bands are applied with power amplifier. Improves the wireless network reception and transmission.

A single AP can handle more than 40 wireless devices on 2.4Ghz and 80 on 5.8Ghz concurrently.

Multiple Operation Modes:

Wireless Access Point: Covert a wired network to a wireless network, which allows you connect laptops, tablets, phones or other WiFi devices.

Wireless Router: Create an instant private wireless network and share Internet to multiple WiFi device.

WiFi Range Extender (Repeater): Extend WiFi coverage of an existing wireless network.

Wireless Bridge: Transmit WiFi from one point to another spot.

Excellent Outdoor Weatherproof and Lighting Protection

IP66-rated weatherproof housing that ensures continued operation in climates of extreme cold, heat or continuous moisture; Robust weatherproof case withstands harsh outdoor conditions. Ideal for extending WiFi to backyard/garden/outhouse/pool.

Flexible Installation with Power Over Ethernet

This Wireless Access Point has integrated Power over Ethernet support, allowing it to be installed in areas where power outlets are not readily available. 802.3af/802.3at/48V PoE Power over Ethernet support and simple mounting design allows for flexible deployment and convenient installation.

Ideal For Outside WiFi Coverage

IP66 robust weatherproof case withstands harsh outdoor conditions: Lightning Protection, Waterproof, Dustproof, Antifreeze, High-Temperature Resistant, Antioxidant.

Ideal design for outdoor WiFi Coverage: Scenic Spot, Community, Park, School, Driving School, Plant Area, Shopping Mall, Village, etc.

KuWFi 2-Pack 300Mbps Wireless Outdoor CPE Kit Point-to-Point Wireless Access Point 2.4G WiFi Bridge Supports 1KM Transmission Distance Solution for PTP/PTMP (Pre-Program)

KuWFi

Based on 544 reviews Check latest price
  • 【What CPE70R is】KuWFi CPE70R is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
  • 【Multiple operation mode,suit for different network & environment】 Point to Point/Multi-Point Connection (1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to CPE70R’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to the CPE70R give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
  • 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance
  • 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
  • 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND

Product features

Point to Point Connection for Wireless Coverage/ Point to MultiPoint Connection for Wireless Coverage
Work Mode

  • Support Wireless AP, Repeater operation mode
  • Support SSID broadcasting, Multi SSID up to 4
  • Support DHCP server

High Gain Antenna

  • Build in 12dBi MIMO panel antenna(embedded)
  • Tx power up to 28dBm
  • Stronger signal strength
  • More wireless coverage

Power over Ethernet

  • It has integrated passive Power over Ethernet (PoE)
  • For easy installation and lower cost
  • So it can be installed in areas where power outlets are not readily available
  • Eliminating the mess of altering existing network infrastructure

Buttons & Port

  • 1*10/100Mbps WAN Port, 1*10/100Mbps LAN Port
  • Reset button(If the units pairing failed, press and hold reset to restore)
  • F & C button: Select /Adjustment button
  • H/C button: Master-slave switch button(H=Master, C=Slave)

LED Display

  • LED Display: Show unit's name(H/C)/channel/signal strength, No need to access into GUI, avoid the complex setup program
  • If P- is not displayed, you need to re-pair or contact the seller’s email
  • NOTE: If The KuWFi is passing the wrong gateway and DNS information.You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS and it should work

Package List

  • CPE70R- 2pcs
  • POE Power Adapter (24V0.5A) - 2pcs
  • Quick Start Guide - 1pcs
  • Ethernet Cable (1 meter) - 2pcs
  • Plastic Hoop - 4pcs

EnGenius Technologies EAP1250 802.11ac Wave 2 Dual-band, Standard PoE, 2x2 Managed Indoor Wireless Access Point Features Quad-Core Processors, MU-MIMO, GigaE Port (Mounting Kit included)

EnGenius

Based on 115 reviews Check latest price

Product description

EnGenius EAP1250 is an enhanced Indoor 802.11AC Wave 2, MU-MIMO Dual-Band Wireless AP with an onboard quad-core processor that boosts wireless performance. Compact and stylish, EAP1250 offers accelerated speeds, increased user device capacities, and improved connection reliability at exceptional pricing that makes next generation, business-class Wi-Fi affordably accessible.

  • [Business Class WiFi] 802.11AC Wave 2 Wireless Speeds up to 867 Mbps on 5 GHz & up to 400 Mbps on 2.4 GHz
  • [Flexible Deployment] Compact, Sleek, Stylish Design allows for easy mounting on wall or ceiling
  • [High Capacity Performance] MU-MIMO Improves Performance & Increases User Device Capacities
  • [Extreme Coverage] Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients. Can cover 2000+ sq ft
  • [Cutting Edge Processor] Quad-Core CPU, 4x ARM Cortex A7 717 MHz Processor
  • [Remote Management] On-Premise Managed Device via SkyKey or EzMaster (No Lifetime License Fees)
  • [TAA Compliant] We source only from the US and other approved countries, adhering to the highest ethical, financial, and security standards established by the GSA

User questions & answers

Question: Does eap1250 have a config page like the eap1300, or is it necessary to use the ezmaster software to configure
Answer: the lite is fine. works great!
Question: Does it come with poe adapter
Answer: It supports B/G/N at 2.4GHz, and A/AC/N at 5GHz
Question: How is this different to eap1300 besides dimensions and led indicators
Answer: The unifi manager is required if you have any meshed AP's. If you shut it down, they will lose connectivity, but the wired AP's will remain working.
Question: This is dumb! why doesn't it say if it comes with a poe injector or just a ac power supply? some here say it comes with poe and others say no
Answer: It comes with a 24v injector brick. The lite came in both a 24v only version and a 802.3af/24v version that was released in 2017 or 2018. The latter is what is currently manufactured so unless someone pawns new-old-stock off on you as new you should get an 802.3af compatible WAP (the box will have a "PoE+ compatible!" sticker on it). I have one of the old style 24v and one of the newer PoE ones.

Product features

Next-Gen 802.11ac Wave 2 Compact Wireless Access Point

The EnGenius EAP1250 Access Point boosts wireless performance for small to mid-size organizations. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed, performance, and greater user device capacity and connection reliability. The sleek, stylish EAP1250 delivers next generation, business-class Wi-Fi at exceptional pricing.

Maximized Speed & Performance

The feature-rich AP leverages the advanced 11ac Wave 2 Wi-Fi technology that maximizes wireless speed and performance while eliminating network lag. Speeds up to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4 GHz frequency band.

Improved Signal Reliability

Beamforming Antenna technology directs and adjusts signal beams as staff or customers move throughout the area, ensuring optimal signal and reception reliability.

Increased User Capacities

Multi-User (MU) MIMO sends dedicated wireless streams to multiple user devices at the same time, improving your network’s efficiency.

Ubiquiti UniFi AC Lite AP - Wireless Access Point - 802.11 B/A/G/n/AC (UAPACLITEUS) 2-Pack Bundle

Ubiquiti Networks

Based on 194 reviews Check latest price

Product description

Ubiquiti Networks networks Unifi AC Lite AP Wi-Fi 802.22 2 pack

User questions & answers

Question: Do I need to use the switch to make this work
Answer: It can configure via web browser without ezmaster.
Question: Not tech savvy here, if I run my CAT6’s to a POE switch will it power these devices and any other software needed to run? Thanks
Answer: It come with Power Adapter and compliant with standard PoE IEEE 802.3af.
Question: Can this access point sit on a desktop
Answer: The hardware specs are the same. The most significant difference (other than the physical dimensions) is the location of the RJ45 jack. On the 1250, the RJ45 jack is oriented facing the side of the AP. If mounted on a ceiling, the cat6 cable will be visible. On the 1300, the RJ45 jack faces the rear of the AP and the cat6 cable can be connected to the LAN port and isn't visible if the AP is mounted directly under the hole for the cable penetration. However, if your setting up the 1250 in a mesh or WDS configuration and not planning to have a hardwired connection to the LAN, then cable visibility won't be an issue. In addition to the different RJ45 jack orientation, I also prefer the low profile of the 1300. The cylinder-like design of the 1250 makes it more noticeable while the tapered face of the 1300 is more discrete from a visual perspective.
Question: Does the 2-pack come with poe injectors
Answer: Sorry for misunderstanding. You can either use included Power Adapter(Supply) or connect to PoE Switch

EnGenius Technologies EAP1300 Wi-Fi 5 (802.11ac Wave 2) 2x2 Managed Indoor Wireless Access Point Features Quad-Core Processors, MU-MIMO, High Powered 26dBm, GigaE Port (Mounting Kit Included)

EnGenius

Based on 113 reviews Check latest price

Product description

EnGenius EnTurbo EAP1300 is an enhanced Indoor 11ac Wave 2, MU-MIMO Dual-Band Wireless Access Points that turbocharges wireless performance for small and mid-size businesses. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed, performance, and greater user device capacity and connection reliability. EAP1300 delivers next generation, business-class Wi-Fi at exceptional pricing.

Turbocharged Wireless Performance

Reaching speeds to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4 GHz frequency band, the EAP1300’s powerful Qualcomm 717 MHz quad-core processor turbocharges wireless performance and efficiency with up to 30 percent faster throughput compared to 11ac Wave 1 3x3 access points.

Next Generation Wi-Fi

The feature-rich EAP1300 AP leverages the advanced 11ac Wave 2 Wi-Fi technology that maximizes wireless speed and performance while eliminating network lag. EnTurbo offers greater user capacities via dedicated multi-user, MU-MIMO connections and optimal signal reliability through Beamforming Antenna technology.

  • Quad-core CPU, 4x arm Cortex A7 Processor, 717 MHz "Turbo engine"
  • 11AC Wave 2 Wireless speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
  • Up to 30% faster throughput over 11AC Wave 1 3x3 APs
  • Mu-mimo improves performance & increases user device capacities
  • Beamforming optimizes antenna signal, reception & reliability for clients

User questions & answers

Question: looking to setup 5 of these on a poe switch, i'd like to broadcast 1 ssid across a hotel building for guest wifi. Is channeling healing offered
Answer: I went from the router to the Power brick, then the power brick to the UAP-AC-Lite. People are saying they are using switches, but as always, make sure the switch has PoE ports and can support the number of UAP-AC-Lites you attach.
Question: Need to setup wifi to a separate building 300 yards away with no way for a wired connection. will this product help me achieve this
Answer: Yes that’s correct. Only thing you should download is the ubiquiti controller. Power runs through the cat 6 if your Switch supports it. If not the injectors that come included provide power.
Question: How much poe power does this ap require? i have a powerdsine 3001gc that's rated for 15.4w
Answer: Yes it can
Question: Does the eap1300 include a 12v 1a adapter as stated in the engenius datasheet on their website
Answer: Yes

Product features

Turbocharged WiFi

Introducing EnTurbo, the next generation of enhanced 11ac Wave 2 access points and bridges that turbocharge wireless performance for small and mid-size businesses.

EnTurbo expands on the legacy of EnGenius’ top selling EAP/ENS/EnStation Series, a favorite network staple among small and mid-size organizations. Experience the next generation of wireless speed, coverage, and reliability you have come to expect from EnGenius.

EnGenius EnTurbo EAP1300 Indoor 11ac Wave 2, Quad-Core Processor, Wireless Access Point turbocharges wireless performance with enhanced speeds, increased device capacity, and improved connection reliability.

Turbocharged Performance

EnTurbo’s powerful Qualcomm 717 MHz quad-core processor turbocharges wireless performance and efficiency. Boost speeds up to 30 percent faster than 11ac Wave 1 3x3 access points.

Maximized Speed & Performance

11ac Wave 2 technology maximizes wireless speed to eliminate network lag ensuring top-notch network performance. Robust point-to-multipoint 802.11AC wireless performance of up to 867 Mbps on the 5 GHz frequency band and 400 Mbps on the 2.4 GHz frequency band creates a dependable network across great distances. EAP1300 features 23 dBm output power and high receive sensitivity, coupled with embedded high-gain omni-directional antennas to deliver stable robust connectivity.

More User Capacities

Multi-User (MU) MIMO sends dedicated wireless streams to multiple user devices at the same time, improving your network’s efficiency.

Improved Signal Connection Reliability

EAP1300 optimize wireless signals for enhanced reliability, boosted reception and uninterrupted connectivity for users as they move around the network with standards-based roaming and Beamforming Antenna technology.

Stylish, Low Profile Hardware Design

Clean lines and low profile housings ensure EnTurbo Access Points and Bridges will blend into even the most elegant settings both indoors and out. The EAP1300EXT is designed for deployments on ceilings where power outlets may be scarce, it is also standard PoE (Power-over-Ethernet) 802.3at capable when use a PoE switches.

ezMaster Network Management Software

Monitor, manage and receive alerts. Add the power of network management when you need it with ezMaster. This free, easy-to-use tool is perfect for gaining insight into your EnTurbo network. Get under the hood with real-time monitoring, rich reporting and analytics, and more all with no license or subscription fees.

Latest Reviews

View all