14 best wall mounted wireless access point
A wall-mounted wireless access point (WAP) is a device used to provide wireless connectivity and internet access in a specific area or building.It is designed to be mounted on a wall to optimize wireless coverage and network performance.
Wireless access points are a crucial part of a wireless network infrastructure, allowing devices like laptops, smartphones, tablets, and other wireless-enabled devices to connect to a wired network, typically the internet, without the need for physical cables. When mounted on a wall, they can provide better coverage and signal distribution across a given space.
Key features of a wall-mounted wireless access point include:
Mounting Design: The access point is specifically designed to be easily mounted on a wall, ensuring optimal positioning for wireless coverage.
Wireless Connectivity: The WAP provides wireless connectivity using various wireless standards (e.g., Wi-Fi 6, Wi-Fi 5, etc.) to support different devices and data transfer rates.
Power over Ethernet (PoE): Many wall-mounted WAPs support PoE, allowing both data and power to be supplied through a single Ethernet cable. This simplifies installation and eliminates the need for a separate power source.
Security Features: Wireless access points come with security features like encryption protocols (e.g., WPA2, WPA3), guest network support, and access controls to ensure a secure network environment.
Multiple Antennas: WAPs typically have multiple antennas to improve signal strength and coverage, ensuring a reliable and high-quality wireless connection.
Management Interface: These devices often come with a management interface, accessed through a web browser, where administrators can configure settings, monitor network performance, and manage connected devices.
Installing a wall-mounted wireless access point strategically in a building or office space helps in overcoming wireless dead zones, ensuring consistent and reliable wireless connectivity for users throughout the premises.
In summary, a wall-mounted wireless access point is a networking device that provides wireless connectivity by being mounted on a wall, offering improved coverage and performance for wireless-enabled devices in a specific area or building.
Below you can find our editor's choice of the best wall mounted wireless access point on the marketProduct description
EAP225 supports both 802.3af PoE and passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible.
Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
MU-MIMO capability requires client devices that also support MU-MIMO.
Seamless roaming requires both the access point and client devices to support 802.11k and 802.11v protocols.
- 【Superior Speeds with MU-MIMO】Designed with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225 reliably delivers dual-band Wi-Fi speeds up to 1350 Mbps to multiple devices at the same time.
- 【Integrated into Omada SDN】Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways. Pick your preferred method of network management from these Omada offerings - Omada hardware controller, Omada software controller or Omada cloud-based controller. Standalone Mode also applies.
- 【Cloud Based Controller】Zero-Touch provisioning (coming soon) allows remote deployment and configuration of multi-site networks. AI-Driven Technology (coming soon) delivers stronger performance and easy network maintenance. Additional fees apply for use of cloud-based controller.
- 【Cloud Access】Remote Cloud access and Omada app brings centralized cloud management of the whole network from different sites—all controlled from a single interface anywhere, anytime.
- 【SDN Compatibility】For SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN APs, Switches and Routers. Non-SDN controllers work only with non-SDN APs. For devices that are compatible with SDN firmware, please visit ‘From the manufacturer – Q&A’ section or tplink website.
- 【Advanced Wireless Tech】Support Mesh WiFi, Seamless Roaming, Band Steering, Airtime Fairness and Beamforming technologies.
- 【Multiple PoE Options for Easy Installation】EAP225 supports both 802.3af/at PoE and Passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible.
- 【Limited Lifetime Warranty】Backed by our industry-leading limited lifetime warranty and free 24/7 technical support, you can work with confidence.
Product features
Seamless Roaming
Seamless roaming switches clients to the AP with the best signal automatically, even when moving. This allows sensitive applications like VoIP and video conferences to go uninterrupted.
Omada SDN with Flexible Management and Cloud Access
Omada SDN integrates network devices including access points, switches & gateways with multiple control options provided - Hardware controller, Software Controller & Cloud-based Controller. Centralized cloud allows for remote management of the entire network via a single interface anywhere, anytime.
Cloud-Based Controller Unlocks More Possibilities
Zero Touch Provisioning (coming soon) allows for remote deployment and configuration of multi-site networks. AI-Driven technology (coming soon) delivers stronger performance and easy network maintenance.
Both require the use of cloud-based controller.
Product description
The Cisco Business 240AC Access Point delivers high density MU-MIMO (4x4) wireless connectivity for small offices. Designed with simplicity, flexibility and security in mind, the Cisco Business 240AC provides superior performance and enhanced range for an optimal user experience.
Compatible with Cisco Business 100 Series Mesh Extenders to rapidly expand your Wi-Fi network.
- PERFORMANCE: Superior MU-MIMO (4x4) performance supporting up to 200 wireless devices and a maximum wireless coverage up to 3000 square feet
- DEPLOYMENT: Flexible deployment wall or celling mount (brackets included). Works also with Cisco Business Power over Ethernet injector (CB-PWRINJ)
- ENHANCED COVERAGE: Supports up to 25 mesh extenders while delivering a reliable user experience
- SET UP IN MINUTES: Simplify management and monitor your network from Cisco Business Mobile app or web browser
- ADVANCED SECURITY: Enterprise-class security prevent malware, phishing, and other threats from compromising your network via Cisco Umbrella integration
- NETWORK ACCESS: Prioritize network access based on use cases (i.e. point of sales system, surveillance) or guest privileges
- PEACE OF MIND: One-year technical support and limited lifetime warranty
User questions & answers
Question: | Is the cbw240ac access point dust tight |
Answer: | Hi. You may use the LAPAC1200C to extend the wireless coverage of your existing network and for increasing the number of users that can connect to it. We also don't have an access point that has a seamless roaming feature. You can consider looking into an extender with the roaming feature instead. |
Question: | Does it need a license |
Answer: | Hi. No, the Linksys LAPAC1200C does not support seamless roaming. Also, the router only supports Wi-Fi 5. |
Question: | If I need warranty service, who would I contact |
Answer: | The Linksys LAPAC1200C comes with a 12V, 1.5A power adapter. |
Question: | Is the 240AC equipped with both wifi radios 2.4ghz and 5ghz |
Answer: | Hi! This supports up to 32 devices per radio. |
Product features
Simple
Intuitive web and mobile network management tools allow for set-up in minutes and simplified, ongoing operations, freeing up valuable time and resources for growth and profitability.
Flexible
Customizable switching, routing, and wireless solution catering to every stage of your business. Extensive portfolio addresses your technical and budget requirements.
Secure
Built-in security, including Cisco Umbrella, mitigates costly breaches while protecting privacy.
Mobile App
The Cisco Business mobile app simplifies the set-up, management, and monitoring of Cisco Business Wireless access points and mesh extenders.
Switches
High-performance switches with a powerful feature set, purpose-built for small businesses.
Routers
Business-class routers with VPN and firewall support ensure network security and privacy.
Wireless Access Points
Powerful 802.11ac access points deliver simple, secure Wi-Fi connectivity to your employees and customers.
Product description
The DAP-2610 wireless access point delivers reliable high-speed wireless performance using the latest 802 11AC Wave 2 standard with maximum wireless signal rates of up to 400 Mbps (256-QAM) over the 2 4 GHz band and 900 Mbps over the 5 GHz band It ships with a low profile mounting base enabling easy installation on any wall or ceiling It also includes adapter clips for attaching to suspended ceiling T-rails This high-speed access point can be AC powered using the (included) AC/DC adapter or for advanced installations It has integrated 802 3af power over Ethernet (PoE) support allowing installation in areas where power outlets are not readily accessible
- 80211ac Wave 2 high-performance wireless
- Up to 1300 Mbps speeds
- Powered by PoE or local AC (adapter included)
- Strong Security and Authentication Features
- Multiple Operation Modes
- Includes mounting base and suspended-ceiling T-rail clips
- LIMITED LIFETIME WARRANTY - Void when not purchased from Authorized US D-Link Reseller
User questions & answers
Question: | Is this access point able to utilize 2.4Ghz and 5Ghz bands at the same time |
Answer: | Yes. You can restrict or permit a particular client joining your network by enabling the MAC Filtering on the AP. For more information you can refer to the product administration guide (Configuring WLAN Security section): https://www.cisco.com/c/en/us/td/docs/wireless/access_point/csbap/CBW_Admin/Admin/en_US/b_Cisco_AP_Admin_Guide.pdf |
Question: | Can i connect this ap to a netgear ad7200 model r9000 router |
Answer: | Yes, the Cisco Business 140AC access point can work with any router and using Cisco router is not a "must". Be aware that the access point is powered via PoE (802.3af/at capable device) or power injector. Management is done through Cisco Business Mobile App (Android or iOS) or Cisco Business Dashboard. More information about the product you can find in the following link: https://www.cisco.com/c/en/us/products/collateral/wireless/business-100-series-access-points/smb-01-bus-140ac-ap-ds-cte-en.html |
Question: | Support Mu-Mimo? wave |
Answer: | Yes, the wired connection will carry the power over Ethernet (POE) required to power this device. The router must first connect to.the supplied POE adapter which will provide the power with the signal from the router. This Acess point will then extend your signal to the area you wish to use in your home. |
Question: | What is the power consumption? I have a POE switch with 30W max at each port. Thanks |
Answer: | Without obstruction the effective range (before drop off) is ~60 ft, line-of-sight, and if the AP is either mounted on the ceiling or high on a wall. EMI radiated from commercial-grade laser printers will significantly degrade the signal as will wireless landline phones that transmit at 2.4 GHz. Transmission at 5 GHz is effective at a shorted range; in my experience, it's around 40 ft line-of-sight. Be aware that many WIFI device have a max transmission speed of 150 Mbps for a N-type WIFI network. To get higher speeds (up to 300 Mbps) a USB N-type adapter is required. |
Product features
Built-in RADIUS and Dynamic VLAN
WPA/WPA2 Enterprise can connect to your existing RADIUS server or use the built-in RADIUS server allowing users to create their accounts within the device itself. Network Access Protection (NAP) this allows dynamic VLAN assignment for each wireless client upon authentication.
Guest access control
Provide Guest access with a Captive Portal. Combine it with RADIUS authentication and Dynamic VLAN for Guest bandwidth and access control.
Scalable Wireless Network Management
D-Link’s free Central WiFiManager: configure and manage multiple access points centrally from a remote location. This allows network administrators to conduct configuration and regular maintenance checks on large deployments remotely, eliminating the need for sending out personnel.
Efficient Power Saving
The DAP-2610 has a built-in schedule function which dynamically powers down the wireless network off when not in use. This feature reduces power consumption, saving energy and money.
Product description
The NETGEAR AC Wi-Fi Business Access Point WAC510 delivers high performance with high client density for enterprises requiring ubiquitous and reliable wireless for all business applications. The WAC510 is managed by NETGEAR Insight app, for a more intuitive and innovative support, with no need for extra management hardware. The WAC510 features Multi-User MIMO (MU-MIMO) to achieve aggregate speeds up to 1.2 Gbps, option to configure as NAT or Access Point modes, and comes with two Ethernet ports, including a Power-over-Ethernet (PoE) 1Gb port. WAC510 comes with lifetime limited warranty, and 24/7 support including lifetime chat.
- MULTIPLE DEVICE PERFORMANCE: Dual-Band AC1300 speed, coupled with MU-MIMO technology, supports up to 200 client devices.
- WIRED ETHERNET PORT: Plug in a printer, storage, or other nearby wired devices into the extra 1 Gigabit port for maximum speed.
- PoE or AC POWERED: Simplified deployment with PoE, or power using the optional PAV12V power adapter (sold separately).
- LOCAL AND REMOTE MANAGEMENT: Includes 1 year free insight subscription for remote management from anywhere, and no additional hardware or cloud key required. Setup, configure, and manage with the Insight app.
- FLEXIBLE MOUNTING: Easy to securely install on the wall or a suspended ceiling with included hardware.
- BUSINESS CLASS SECURITY: Supports WPA, WPA2, and rogue AP detection.
- ADVANCED TECHNOLOGY: Supports load balancing, band steering, and assisted roaming.
User questions & answers
Question: | Can wac540 work with poe of gc110p switch |
Answer: | I can not say with a specific model. As long as it is true POE with sufficient output per port then it should. I use mine with a BV Tech 8 port POE switch that has 130W Max Power (up to 30W per port) and this works perfectly with the POE line extended 100 ft per line. |
Question: | Can it work as an extender of wnd930 ap |
Answer: | I don't know the precise definition of "extender", but I know that you can set up two WAC5xx units in bridge mode, with one connected to the wired network and one freestanding, to "extend" your network. If there is a bridge mode option on the wnd930 ap, it may be compatible. |
Question: | So if one wanted a single ethernet port for a hard wired device, would the lan2 plug work? or do i need a separate router outside of this |
Answer: | Yes, the second port can be used to connect to another device. I have a cat8 Ethernet cable coming from the second port to a 1 gb switch and have three other computers connected to that switch and the throughput is 1000mbs just as it is from the switch that this access point is connected to. No speed loss. My cable from switch that has xfinity internet up to the Netgear access point is cat7 heavy duty outdoor. I have had no issues or drops in speed. |
Question: | How do they comapre to uibiqiti unifi uap-ac-pros or uap-ac-lites |
Answer: | WAC510 has better rateVsrange than uap-ac-lite and uap-ac-lr. WAC540 is a 4x4 and is better than uap-ac-pro. |
Product features
Power to Match Your Workplace
Easy to power via PoE or with PAV12V AC adapters sold separately.
Flexible Mounting Options
Easy installation on a wall or a suspended ceiling. Attaches securely to the ceiling t-bar, not an unsecured loose tile. Mounting hardware included.
Optimize Your Access Points Automatically with NETGEAR Instant WiFi
Instant WiFi continuously optimizes power and traffic across all channels and bands, minimizing interference and maximizing performance for everyone on your network.
Product description
EnGenius EnTurbo EAP1300 is an enhanced Indoor 11ac Wave 2, MU-MIMO Dual-Band Wireless Access Points that turbocharges wireless performance for small and mid-size businesses. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed, performance, and greater user device capacity and connection reliability. EAP1300 delivers next generation, business-class Wi-Fi at exceptional pricing.
Turbocharged Wireless Performance
Reaching speeds to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4 GHz frequency band, the EAP1300’s powerful Qualcomm 717 MHz quad-core processor turbocharges wireless performance and efficiency with up to 30 percent faster throughput compared to 11ac Wave 1 3x3 access points.
Next Generation Wi-Fi
The feature-rich EAP1300 AP leverages the advanced 11ac Wave 2 Wi-Fi technology that maximizes wireless speed and performance while eliminating network lag. EnTurbo offers greater user capacities via dedicated multi-user, MU-MIMO connections and optimal signal reliability through Beamforming Antenna technology.
- Quad-core CPU, 4x arm Cortex A7 Processor, 717 MHz "Turbo engine"
- 11AC Wave 2 Wireless speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
- Up to 30% faster throughput over 11AC Wave 1 3x3 APs
- Mu-mimo improves performance & increases user device capacities
- Beamforming optimizes antenna signal, reception & reliability for clients
User questions & answers
Question: | looking to setup 5 of these on a poe switch, i'd like to broadcast 1 ssid across a hotel building for guest wifi. Is channeling healing offered |
Answer: | I went from the router to the Power brick, then the power brick to the UAP-AC-Lite. People are saying they are using switches, but as always, make sure the switch has PoE ports and can support the number of UAP-AC-Lites you attach. |
Question: | Need to setup wifi to a separate building 300 yards away with no way for a wired connection. will this product help me achieve this |
Answer: | Yes that’s correct. Only thing you should download is the ubiquiti controller. Power runs through the cat 6 if your Switch supports it. If not the injectors that come included provide power. |
Question: | How much poe power does this ap require? i have a powerdsine 3001gc that's rated for 15.4w |
Answer: | Yes it can |
Question: | Does the eap1300 include a 12v 1a adapter as stated in the engenius datasheet on their website |
Answer: | Yes |
Product features
Turbocharged WiFi
Introducing EnTurbo, the next generation of enhanced 11ac Wave 2 access points and bridges that turbocharge wireless performance for small and mid-size businesses.
EnTurbo expands on the legacy of EnGenius’ top selling EAP/ENS/EnStation Series, a favorite network staple among small and mid-size organizations. Experience the next generation of wireless speed, coverage, and reliability you have come to expect from EnGenius.
EnGenius EnTurbo EAP1300 Indoor 11ac Wave 2, Quad-Core Processor, Wireless Access Point turbocharges wireless performance with enhanced speeds, increased device capacity, and improved connection reliability.
Turbocharged Performance
EnTurbo’s powerful Qualcomm 717 MHz quad-core processor turbocharges wireless performance and efficiency. Boost speeds up to 30 percent faster than 11ac Wave 1 3x3 access points.
Maximized Speed & Performance
11ac Wave 2 technology maximizes wireless speed to eliminate network lag ensuring top-notch network performance. Robust point-to-multipoint 802.11AC wireless performance of up to 867 Mbps on the 5 GHz frequency band and 400 Mbps on the 2.4 GHz frequency band creates a dependable network across great distances. EAP1300 features 23 dBm output power and high receive sensitivity, coupled with embedded high-gain omni-directional antennas to deliver stable robust connectivity.
More User Capacities
Multi-User (MU) MIMO sends dedicated wireless streams to multiple user devices at the same time, improving your network’s efficiency.
Improved Signal Connection Reliability
EAP1300 optimize wireless signals for enhanced reliability, boosted reception and uninterrupted connectivity for users as they move around the network with standards-based roaming and Beamforming Antenna technology.
Stylish, Low Profile Hardware Design
Clean lines and low profile housings ensure EnTurbo Access Points and Bridges will blend into even the most elegant settings both indoors and out. The EAP1300EXT is designed for deployments on ceilings where power outlets may be scarce, it is also standard PoE (Power-over-Ethernet) 802.3at capable when use a PoE switches.
ezMaster Network Management Software
Monitor, manage and receive alerts. Add the power of network management when you need it with ezMaster. This free, easy-to-use tool is perfect for gaining insight into your EnTurbo network. Get under the hood with real-time monitoring, rich reporting and analytics, and more all with no license or subscription fees.
Product description
The Linksys Business Wireless-N Access Point employs Wi-Fi technology (802.11n) to provide a fast, powerful wireless network that's ideal for today's tech-savvy businesses.
- Integrated Power over Ethernet
- Single Band (2.4GHz) capability and speeds up to 300 Mbps
- Industrial-strength Wi-Fi Protected Access (WPA, WPA2) security and data encryption
- WDS and Workgroup Bridge Mode for Range Extension
- IPv6 Support
- High Power PA for better Wi-Fi coverage
User questions & answers
Question: | I would like to run a wired connection from my existing router to another end of my home in order to extend the wireless signal. Is this appropriate |
Answer: | I purchased this 5 pack and it DID NOT come with POE injectors. It was easy enough to order 5 of the 48V 0.5A (POE-48-24W-G) injectors for about $20 each. I have also purchased a couple of the single units, and as others have said, they DO come with a POE injector. |
Question: | What is the range on this before there is any drop off |
Answer: | Ubiquity Edgerouter Lite or X are both good but are slower performance. At this moment Mikrotik hEX RB750Gr3 appears to offer much better performance. I have this unit and it actually was VERY easy to setup. Took me only about 30 minutes since they now load a standard configuration that is ready to go much like a Netgear, Asus, or Linksys consumer router. Sure, it can be complex if you want all kinds of special rules and such but certainly no more than the Edgerouter but of course you can ignore all that stuff if you don't need it. The web interface is quite easy to use and they actually have a very complete and easy to use detailed manual both online and for download that you can't even get with the consumer level products. I found performance to be amazing right out of the box and was about to get over 898 mbs using Speedtst.com on my 1gig service up from 350 with my old Netgear 7000. And, of course you get "all the firewall stuff" and no licensing fees. I've since upgraded to the RB3011 which is about double the price but allows me to get rid of my Netgear switch and has more headroom for future DOCSYS 3.1 services |
Question: | How can i configure this for seamless transition from one wap to another? can i use the same ssid for router and more than one wap |
Answer: | It does come with power adapter, however, it can be power up by standard 802.3af PoE Switch |
Question: | Does this Product come with the power adapter or do you have to use POE device? Thank you |
Answer: | This is a newer and More powerful Model with Wireless A/C |
Product features
Linksys LAPN300 Business Wireless-N300 Access Point
Provide your business with better wireless connectivity using the Linksys LAPN300 Business Wireless-N300 Access Point with PoE. Well suited for small- to medium-sized offices, the LAPN300 offers a streamlined way to provide Wi-Fi access for those on mobile devices or extend the range of your existing wireless network. Power over Ethernet (PoE) lets you pass electrical power and data through one cable, while advanced security protocols help keep your network safe.
What's in the Box:
Wireless Access for Improved Office Networking
With the LAPN300, you can easily connect notebooks, smartphones, tablets, and other Wi-Fi devices within your place of business. This wireless access point features a single wireless band (2.4 GHz) and delivers data transfer rates up to 300 Mbps for optimal performance. A Gigabit Ethernet port provides a fast connection between the LAPN300 and your wired network.
Optimal Wireless Coverage and Flexible Deployment
Featuring Wireless-N technology, the LAPN300 can provide better, wider wireless coverage within your office--particularly for those using Wi-Fi-enabled devices in hard-to-reach areas of the building. For optimal flexibility, and to suit the needs of your business, this device can be deployed as a typical access point or set up as a workgroup bridge to extend your wireless range.
Power over Ethernet Capability for Ease of Use
For simplicity, the LAPN300 sports 802.3af/802.3at Power over Ethernet (PoE) technology, which passes both electrical power and data to the device through one Ethernet cable, without needing a separate power adapter or a nearby electrical outlet. An intuitive Web-based interface makes the LAPN300 easy for administrators to set up and use.
Captive Portal for Guest Wi-Fi Access
Control guest Wi-Fi access with a captive portal, which routes users to a special web page for authentication before using the Internet. Use the captive portal for secure and customized access from Wi-Fi hotspots such as meeting rooms, cafes, or courtyards.
Advanced Security to Protect Your Network
To help keep your company's wireless network safe, the LAPN300 features Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) security protocols, as well as 802.1X with RADIUS, or Remote Authentication Dial-In User Service, which provides administrators with a centralized way to authenticate users on the network.
Other security technologies built into the LAPN300 include Rogue AP Detection, which helps administrators identify authorized access points on the network; MAC address filtering to authorize or block particular devices based on their MAC address; SSID to VLAN mapping for connectivity; Wireless Broadcast Scheduling for transmitting packets of data to all devices on the network; and 802.1X Supplicant, which allows the access point to gain access to a secured wired network.
Product Information: This wireless access point measures 243.08 x 236.98 x 43.69 millimeters (L x W x H) and weighs 489.88 grams/1.08 pounds. It supports Internet Protocol version 6 (IPv6) for routing Internet traffic.
Product description
Deploy the UniFi AC Pro AP indoors or outdoors, in wireless networks requiring maximum performance. Sporting a weatherproof design, the UniFi AC Pro AP features simultaneous, dual-band, 3x3 MIMO technology and convenient 802.3af PoE/802.3at PoE+ compatibility.
- 3 Dual-Band Antennas, 3 dBi each
- Max. Power Consumption: 9W
- Features auto-sensing 802.3af/802.3at PoE support and can be powered by any of the following: Ubiquiti Networks UniFi Switch 802.3af/802.3at PoE+ compliant switch Ubiquiti Networks Gigabit PoE Adapter (48V, 0.5A)
- Up to 5X Faster with Dual-Radio 3x3 11AC MIMO Technology
- Unifi AP AC PRO UAP-AC-PRO-US 802.11ac PRO Wireless Access Point - Enterprise Wi-Fi System
- The UniFi AC Pro AP supports simultaneous dual-band, 3x3 MIMO technology in the 5 and 2.4 GHz radio bands.
- The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use.
- Install, configure, and manage all of the UniFi APs with the intuitive and user-friendly UniFi controller user interface.
User questions & answers
Question: | Can it get wet |
Answer: | If you want to set 1 SSID for guest Wifi and strongly recommended that you set up VLAN tag for Guest SSID. |
Question: | hola puedo comprarlo y utilizarlo en colombia |
Answer: | Yes, EAP1300 Wireless Access Point provide WiFi to building 300 yard away. You also need pair (2units) of Point-to-Point AP (EnStation5-AC) to established the link between building. EnStation5-AC (1) wire to Switch/Router in the main building, wireless connect to another EnStation5-AC (2). Wire EnStation5-AC(2) to EAP1300. |
Question: | is the US version or international version |
Answer: | 12W (Peak Power) |
Question: | Can this extend an existing network from my internet provider |
Answer: | Yes, It does included Power Adapter in the packaging of EAP1300 |
Product description
The NETGEAR WAC104 is a dual band 802.11ac wireless access point for the small business, coffee shop or dental office looking for low maintenance, superior WiFi that is easy on the IT budget. The no-frills WAC104 features external antennas that provide a far reaching, rock solid WiFi signal and transfers data at speeds up to 1.2Gbps. Adding more value, the WAC104 is conveniently equipped with four Gigabit Ethernet ports to further extend the wired network and comes with a segment leading 3-year hardware warranty and lifetime chat support. WAC104 – Fast, reliable WiFi that just works. Backward compatible to allow legacy devices to connect at their fastest speed. Powerful 880MHz processor.
- Fast dual band 802.11ac WiFi at a combined aggregate speed of 1.2 Gbps (300Mbps at 2.4 GHz and 867Mbps at 5 GHz)
- Factory tuned external antennas provide superior signal and far reaching WiFi coverage
- Advanced Security & Flexible Wireless Configuration - access point, and WDS point-to-point / point-to-multipoint wireless bridge mode.Memory:128MB NAND flash and 128MB DDR3 RAM
- Works with all N150, N300, N600 and AC devices. IPV6 support for improved performance
- Easy to setup and configure with WiFi Protected System (WPS) button for easy one-touch client connectivity
- Four built-in Gigabit Ethernet ports to connect to PC, laptops, and other wired devices
User questions & answers
Question: | Can you hook an external antenna to unit |
Answer: | I do not see any mention of hooking an external antenna to this unit in the owner's manual. |
Question: | I don't see a wan port on this ac, it doesn't have one |
Answer: | This product is a wireless access point, often called simply an AP, or Access Point, and as such it doesn't have a WAN (wide area network) uplink port. You would connect this product to a regular LAN (local area network) port on an Ethernet (wired) router which in turn would be connected via its uplink port to a source of Internet access such as a cable modem that has been supplied to you as part of your cable company Internet access plan. |
Question: | How do I get this to work as an access point with my Xfinity gateway/modem/router? It's connecting but no internet |
Answer: | 1. You have to program the AC1200 using the admin account to act as an access point. Connect your pc directly to the AC1200. Turn the AC1200 on before you turn on your pc so that your pc gets a tcpip (internet) address that is compatible with the AC1200. 2. Login to the AC1200 with the admin account. Use your web brouser to get to the admin account. The default web address is usually 192.168.0.1 3. You have to disable the dhcp function on the AC1200. The Xfinity router needs to be the only device to assign dhcp addresses. If you don't disable the AC1200 from assigning dhcp addresses it will create a subnetwork that is separate from the Xfinity network using a different address range. (Usually starting with 192.168.000.002 to 192.168.000.255). 4. Setup any security settings and network names before you enable the access point mode. 5. Save your new settings and write down any passwords that you may have changed. 6. I also usually put a static IP address in the access point that is in the range of the Xfinity router. That way you can gain accesss to the AC1200 later because you know its address. 7. Plug in an ethernet cable from the Xfinity router to one of the 4 lan outputs of the AC1200. It might also work if you use the wan port (yellow connector) if Netgear updated their software. If you use one of the 4 outputs it guarantees that the access point will be part of the existing Xfinity network. |
Question: | Can this set up.as a repeater (wifi extender |
Answer: | A WAP or Wireless Access Point is different than a "repeater or WiFi extender". The primary function of this device is to plug a Cat 5/5e/6 cable into one of the ports. It connects by "hardwire" to your network first, then broadcast the WiFi signal. A WiFi Extender/repeater on the other hand connects by wireless to another wireless access point. You must determine "where" you want to connect first. The "range" will determine the antenna selection. See this graphic: https://www.google.com/search?q=db1+antenna+Wifi&espv=2&biw=1013&bih=426&source=lnms&tbm=isch&sa=X&ved=0ahUKEwinx8uL4fvRAhXFhlQKHYinCK4Q_AUIBygC#tbm=isch&q=db1+antenna+Wifi+range+images&imgrc=lV_VC2Rf01X2XM: |
Product features
NETGEAR AC1200 Dual Band Wireless Access Point (WAC104-100NAS)
The NETGEAR Dual Band 802.11ac Wireless Access Point (AP) delivers high performance for Small Office and Home Office (SOHO) deployments and supports dual band concurrent operation at 2.4GHz and 5GHz with combined throughput of 1.2Gbps (300Mbps at 2.4GHz and 867Mbps at 5GHz). The WAC104 Wireless 802.11ac Access Point provides ease of use in standalone access point mode.
- 【What CPE70R is】KuWFi CPE70R is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
- 【Multiple operation mode,suit for different network & environment】 Point to Point/Multi-Point Connection (1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to CPE70R’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to the CPE70R give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
- 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance
- 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
- 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
Product features
Point to Point Connection for Wireless Coverage/ Point to MultiPoint Connection for Wireless Coverage
Work Mode
- Support Wireless AP, Repeater operation mode
- Support SSID broadcasting, Multi SSID up to 4
- Support DHCP server
High Gain Antenna
- Build in 12dBi MIMO panel antenna(embedded)
- Tx power up to 28dBm
- Stronger signal strength
- More wireless coverage
Power over Ethernet
- It has integrated passive Power over Ethernet (PoE)
- For easy installation and lower cost
- So it can be installed in areas where power outlets are not readily available
- Eliminating the mess of altering existing network infrastructure
Buttons & Port
- 1*10/100Mbps WAN Port, 1*10/100Mbps LAN Port
- Reset button(If the units pairing failed, press and hold reset to restore)
- F & C button: Select /Adjustment button
- H/C button: Master-slave switch button(H=Master, C=Slave)
LED Display
- LED Display: Show unit's name(H/C)/channel/signal strength, No need to access into GUI, avoid the complex setup program
- If P- is not displayed, you need to re-pair or contact the seller’s email
- NOTE: If The KuWFi is passing the wrong gateway and DNS information.You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS and it should work
Package List
- CPE70R- 2pcs
- POE Power Adapter (24V0.5A) - 2pcs
- Quick Start Guide - 1pcs
- Ethernet Cable (1 meter) - 2pcs
- Plastic Hoop - 4pcs
- 📶【High Power Outdoor Access Point】500mW transmit power, up to 300 feet radius coverage range and performance speed up 50% with the support of 2x5dBi antennas and dual chip+PA, JW-EW74 gets a perfect performance in long-distance.
- 🌐【Dual Band & High Transmission】Speed up to 2.4GHz 300Mbps and 5.8 GHz 867Mbps, high power transmission breaking down the range limitations of WiFi. Say goodbye to the signal latency and slow wifi speed.
- 🔌【Powered by Passive PoE Flexibly】802.3af/802.3at/PoE Power (PoE Adapter Included) over Ethernet support for flexible deployment. NOTE: the outdoor access point only support powered by 24V POE since it will be burnt out when powered by 48V POE.
- 🔧【Security and Easy Installation】Provides WEP, WPA/WPA2.WPA-PSK /WPA2-PSK for your data security. Simple installation, can be pole or wall mounted. (Note: It's recommended that install in a empty place with few obstacle)
- 💻【4 Modes & Support 64 Devices】JW-EW74 supports AP, Router, Bridge, repeater mode. It can meet your all network requirements in different environment. Support 64 devices to connect at the same time, stable and more efficient.
User questions & answers
Question: | Can this be used to pick up hotspot signal with browser hijack login page (e.g., McDonald's) and then repeat/amplify the siginal |
Answer: | No. Not nearly fine enough to do that, if it can be done at all. |
Question: | Can this be powered by any 24v passive poe ethernet switch or will it only work with the supplied poe injector |
Answer: | Comes with 50, 100 and 150. 2 sheets of each. |
Question: | Is there Customer Support telephone number I can call if have issue installing |
Answer: | Made in China, thanks |
Question: | Does it require a cat6 cable to another router or will it wirelessly receive and extend a signal |
Answer: | 8 pieces of same grit. NOT MIXED. |
Product features
AC1200 High Power Access Point for All Kinds of Outdoor Applications
Get an IP66-rated Weatherproof JW-EW74 High Power AC1200 Outdoor Wireless Access Point. WiFi signal booster, wifi range extender for patio, farm, school, village, library, hotel, mall, factory, community, park, street etc.
AC1200 High Power Wireless Access Point
Chip: MT7628DAN + MT7612E
Port: 1 x WAN/LAN RJ45 Port, 1x Reset Port.
LED: 1 x WAN/LAN 1 x Power 1 x WiFi 3 x Signal.
Power Supply: DC24V / 0.5A Power over Ethernet ( Passive PoE, 300 feet at most).
Wireless Standards: IEEE 802.11ac/a/b/g/n.
Transmit Power: 2.4G Max 27dBm 5G Max 25dBm.
Wireless Security: WPA, WPA2, WPA-PSK, WPA2-PSK, AES, TKIP, MAC.
Wireless Rate : 2.4GHz 300Mbps, 5.8GHz 867Mbps
Box included:
AC1200 High Power
We use high power, 1200mbps wireless outdoor AP devices to provide you with faster and more stable internet speeds than others.
Even if you are outdoors nearhome, you can use the Internet safely and for free.
High Tech Support
MT7628DAN + MT7612E Chip
High Power 500mW Dual Band PA
RAM: 64MB
FLASH: 8MB
Clear the WiFi dead zones and provide you with a stable and speeding local area network.
IP66-rated Weatherproof
Working normally in extremely hot and cold environment.
Withstanding working temperature: -40°C~70°C (-40°F~158°F)
Working normally under extremely dry and humid environments.
Working humidity: 10%~90%RH non-condensing
Dual Band for Different Environment
2.4GHz: 300Mbps. It has better wall penetration and diffraction capabilities, suitable for long distance with many obstacles.
5.8GHz: 867Mbps. It has better speed and anti-interference ability, suitable for long distance environment that is relatively empty.
Product description
ZoneFlex R310 Unleashed, dual band 802.11ac Indoor Access Point, BeamFlex, 2x2:2, 1-Port, PoE, Does not include power adapter or PoE Injector. Limited Lifetime Warranty
- MIMO 2x2:2, dual-band 867 Mbps (5 GHz) and 300 Mbps (2.4 GHz) of user throughput
- Up to 4dB of statistical BeamFlex gain and up to 10dB of interference mitigation
- Capable of supporting up to 100 clients per access point, supports multicast IP video streaming
- Up to 2x to 4x increase in Wi-Fi signal coverage, WPA-PSK (AES), 802.1X support
- Blazing fast 802.11ac speeds, 802.3af Power over Ethernet (PoE) Power adapters sold separately
User questions & answers
Question: | In a mesh setup, the master is connected to router poe but do the other ap’s need to be connected to the switch or can they just be powered on |
Answer: | hi, you can get support via the aftersales card. |
Question: | What does the middle led, air, stand for |
Answer: | Dear customer, It depends on what mode you set. If ap mode: you nedd connect it with a router via network cable. If repeater mode: it wirelessly receive and extend a signal. Contact us via:[email protected] for further assistance if you have any other question. Steven JOOWIN Customer Service |
Question: | Can i use ubiquiti gigabit 24v 0.5a poe injector for this ap |
Answer: | I’m not sure what kind of fryer basket you have, but I would hesitate Using something that would shed grit into your cooking machine. |
Question: | Can i deploy this in my current mixed network (non-ruckus) Only as Ap with ubiquti router |
Answer: | Hello - This pack includes grits 50, 100 and 150. |
- 【What KuWFi CPE200M is】an 11AC 5GHz 900Mbps Long Range WiFi Extender Outdoor Wireless Bridge CPE Kit with ethernet port. The Wi-Fi range to up to 2-3KM and with LED display to configure the PT/PTMP connection, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
- 【Multiple operation mode,suit for different network & environment】 Connect an IP Surveillance Camera to CPE200M’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200M gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR
- 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 2-3KMdistance. It transmits via wireless WiFi, reducing the trouble of wiring cable
- 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
- 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
Product features
Point to Point Connection for Wireless Coverage/ Point to MultiPoint Connection for Wireless Coverage
KuWFi CPE200M is an 11ac 5G outdoor CPE with LED display. It comply with 802.11b/g/n/ac Wi-Fi standard, data rate up to 900Mbps, Build in 12dBi panel antenna, the Wi-Fi range to up to 2-3KM. With LED display, wireless AP, Wi-Fi repeater operation mode, it work in pairs for point to point connection,make more than 16PCS IP camera can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.
TDMA Support
CPE200M support HI-MAX TDMA Technology, use polling to solve the hidden node and resource waste problem between the CPE and base station, provide low latency, high throughput in PTP/PTMP application like IP camera wireless monitoring, long range Wi-Fi Transmission.
Access Controller System & Cloud Management System( work with KuWFi AC ONLY )
With Access Control System under AP operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
Then work with Cloud Management System, easy to do central and remote management, advertisement and multiple authentication make this AP more professional in Wi-Fi Projects.
5.8G 900Mbps Data Rate
- CPE200M features 802.11b/g/n/ac Wi-Fi and MIMO technology, 5.8G 900Mbps wireless speed ensures high speed internet access and more end users access
IP Cameras Monitor
- Suitable for long range video transmission point to point 2-3Km Pre-program wifi bridge mode, no need seting
- It can work two unit at the same time, no need long cable for connect to camera with your PC
Power over Ethernet
- It has integrated passive Power over Ethernet (PoE)
- For easy installation and lower cost
- So it can be installed in areas where power outlets are not readily available
- Eliminating the mess of altering existing network infrastructure
Building to Building WiFi Bridge
Transmit your network wirelessly to another house/barn/garage
Avoid wiring trouble, suitable for outdoor environment
LED Display
- LED Display: Show unit's name(H/C)/channel/signal strength, No need to access into GUI, avoid the complex setup program
- If P- is not displayed, you need to re-pair or contact the seller’s email
- NOTE: If The KuWFi is passing the wrong gateway and DNS information.You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS and it should work
Extreme Distances Even in Extreme Weather
Wireless wifi Bridge Waterproof & dust proof & lighting protection
Operating Temperature: -30℃-55℃
Storage Temp: -40℃-70℃
High Gain Antenna
- Build in 12dBi MIMO panel antenna(embedded)
- Tx power up to 28dBm
- Stronger signal strength
- More wireless coverage
Package List
- CPE200M- 2pcs
- POE Power Adapter (24V0.5A) - 2pcs
- Quick Start Guide - 1pcs
- Ethernet Cable (1 meter) - 2pcs
- Plastic Hoop - 4pcs
Buttons & Port
- 1*10/100Mbps WAN Port, 1*10/100Mbps LAN Port
- Reset button(If the units pairing failed, press and hold reset to restore)
- F & C button: Select /Adjustment button
- H/C button: Master-slave switch button(H=Master, C=Slave)
Product description
EnGenius EAP1250 is an enhanced Indoor 802.11AC Wave 2, MU-MIMO Dual-Band Wireless AP with an onboard quad-core processor that boosts wireless performance. Compact and stylish, EAP1250 offers accelerated speeds, increased user device capacities, and improved connection reliability at exceptional pricing that makes next generation, business-class Wi-Fi affordably accessible.
- [Business Class WiFi] 802.11AC Wave 2 Wireless Speeds up to 867 Mbps on 5 GHz & up to 400 Mbps on 2.4 GHz
- [Flexible Deployment] Compact, Sleek, Stylish Design allows for easy mounting on wall or ceiling
- [High Capacity Performance] MU-MIMO Improves Performance & Increases User Device Capacities
- [Extreme Coverage] Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients. Can cover 2000+ sq ft
- [Cutting Edge Processor] Quad-Core CPU, 4x ARM Cortex A7 717 MHz Processor
- [Remote Management] On-Premise Managed Device via SkyKey or EzMaster (No Lifetime License Fees)
- [TAA Compliant] We source only from the US and other approved countries, adhering to the highest ethical, financial, and security standards established by the GSA
User questions & answers
Question: | Does eap1250 have a config page like the eap1300, or is it necessary to use the ezmaster software to configure |
Answer: | the lite is fine. works great! |
Question: | Does it come with poe adapter |
Answer: | It supports B/G/N at 2.4GHz, and A/AC/N at 5GHz |
Question: | How is this different to eap1300 besides dimensions and led indicators |
Answer: | The unifi manager is required if you have any meshed AP's. If you shut it down, they will lose connectivity, but the wired AP's will remain working. |
Question: | This is dumb! why doesn't it say if it comes with a poe injector or just a ac power supply? some here say it comes with poe and others say no |
Answer: | It comes with a 24v injector brick. The lite came in both a 24v only version and a 802.3af/24v version that was released in 2017 or 2018. The latter is what is currently manufactured so unless someone pawns new-old-stock off on you as new you should get an 802.3af compatible WAP (the box will have a "PoE+ compatible!" sticker on it). I have one of the old style 24v and one of the newer PoE ones. |
Product features
Next-Gen 802.11ac Wave 2 Compact Wireless Access Point
The EnGenius EAP1250 Access Point boosts wireless performance for small to mid-size organizations. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed, performance, and greater user device capacity and connection reliability. The sleek, stylish EAP1250 delivers next generation, business-class Wi-Fi at exceptional pricing.
Maximized Speed & Performance
The feature-rich AP leverages the advanced 11ac Wave 2 Wi-Fi technology that maximizes wireless speed and performance while eliminating network lag. Speeds up to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4 GHz frequency band.
Improved Signal Reliability
Beamforming Antenna technology directs and adjusts signal beams as staff or customers move throughout the area, ensuring optimal signal and reception reliability.
Increased User Capacities
Multi-User (MU) MIMO sends dedicated wireless streams to multiple user devices at the same time, improving your network’s efficiency.
Product description
Model
Spec
Features
Manufacturer Warranty
- 300Mbps wireless transmission rate, brings smooth wireless N experience
- Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
- Easily setup a WPA encrypted secure connection at a push of the QSS button
- Up to 30 meter (100 feet) Power over Ethernet capability for flexible deployment
User questions & answers
Question: | Is it possible to replace one of the omni directional antenna with an RP-SMA cable from one of those 24dbi antenna and use this AP as a repeater |
Answer: | You would need a Powered Antenna adapter. Basically the powered antenna hooks to the RP-SMA slot, then has the powered hub, and then you put a % dbi antenna on it and it'll get 2x more antenna strength. Even 2x more then what you'll use for a higher DBI antenna. So if you use a 24dbi antenna, it'd more be like a 48dbi antenna. So if you use double 10dbi antennas with the power adapter. that'll be more then enough to have signal strength to get all the house at max, even if |
Question: | Confused. It says "wireless" but yet asks to be hooked to computer. Can someone explain please |
Answer: | This is a wireless access point not a router, that means that it only provides a wireless signal for computers, tablets phones etc. It must have a wired connection to it from the internet. It does not have a firewall so if you have a internet connection only at this time you should get a model with a router/firewall not this model. |
Question: | Can this access point have the same SSID as my main router in order to be able to access the same network |
Answer: | It's going to be connected to the same network and can have the same SSID. I use mine as an access point at the other end of the my house and gave it a slightly different name so I would know which device (my router also has wireless connectivity). I could always look at signal strength and tell the difference, but I like the slightly different name. |
Question: | I need to have internet in a device that only takes ethernet.Can this device pick the wireless signal and give internet to my device using ethernet |
Answer: | Also note that the ethernet port is only 100Mbit. So if your existing WiFi is usually capable of more than 100Mbit, for example your WiFi internet is 150Mbit or more, you will only get around 100Mbit or a little less to your ethernet device. You'd have to pay a little more money for a different device with a GigaBit ethernet port if you want to get anything more than 100Mbit out of this ethernet port. |
Question: | The description states it has four antennae to give it an extended range, but the picture does not reflect that information. Where are they |
Answer: | Hi, Dave. The antennae of the Linksys EA2700 is installed inside the router. |
Question: | My question is this router compatible with spectrum/time warner |
Answer: | yes - have had it for over a year no problems, added an extender and still doing well |
Product features
Wireless N - Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!
Multiple Operating Modes- Easy to Build WLAN
Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported- More Flexible Deployment
The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
Latest Reviews
View all
Longest Lasting Drone Battery
- Updated: 22.05.2023
- Read reviews

Ear Plugs For Sleeping Snorings
- Updated: 17.02.2023
- Read reviews

Great Family Games
- Updated: 04.06.2023
- Read reviews

Disney Anniversary Gifts For Husbands
- Updated: 16.04.2023
- Read reviews

Beach Volleyball For Kids
- Updated: 13.05.2023
- Read reviews