11 best small ethernet switch
A small Ethernet switch is a networking device used to connect multiple Ethernet-enabled devices within a local area network (LAN). These switches are commonly used in home and small office environments to enable the sharing of internet connections and local resources among computers, printers, and other networked devices. Here are some key features and information about small Ethernet switches:
Port Count: Small Ethernet switches typically come in various port configurations, such as 5, 8, 10, or 16 ports. The number of ports determines how many devices you can connect to the switch.
Functionality: Ethernet switches operate at Layer 2 (Data Link Layer) of the OSI model and are used to forward data frames between devices within the same network. They are more efficient than traditional hubs because they can intelligently forward data only to the device that needs it, reducing network congestion.
Plug-and-Play: Most small Ethernet switches are designed for easy installation and use. They are typically "plug-and-play" devices, which means you can connect them to your network without needing to configure complex settings.
Speed: Ethernet switches support different speeds, with the most common being Fast Ethernet (10/100 Mbps) and Gigabit Ethernet (1 Gbps). The choice of speed depends on the network's requirements and the capabilities of the connected devices.
Managed vs. Unmanaged: Small Ethernet switches are often unmanaged, which means they don't require configuration and operate transparently. Managed switches, on the other hand, offer advanced features like VLAN support and QoS settings but are typically larger and more expensive.
Power over Ethernet (PoE): Some small Ethernet switches come with PoE capabilities, allowing them to deliver power to compatible devices like IP cameras and VoIP phones through the Ethernet cable.
Compact Design: Small Ethernet switches are designed to be compact and space-efficient, making them suitable for small home offices or setups with limited space.
Energy Efficiency: Many modern Ethernet switches are designed to be energy-efficient, with features like auto-sensing and power-saving modes to reduce energy consumption when ports are not in use.
Reliability: Ethernet switches are typically reliable devices with low failure rates, making them a dependable choice for connecting devices in a local network.
Price Range: The cost of small Ethernet switches can vary based on factors like port count, speed, and additional features. They are generally affordable for small-scale networking needs.
In summary, small Ethernet switches are essential networking products used to connect multiple devices within a local network, providing efficient data transfer and resource sharing capabilities. They are easy to set up, come in various configurations, and are suitable for home and small office environments.
Below you can find our editor's choice of the best small ethernet switch on the market
TP-Link - TL-SG105 5 Port Gigabit Ethernet Network Switch - Ethernet Splitter | Plug & Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Limited Lifetime Protection(TL-SG105) Black
TP-Link
Product description
TP-LINK 5 port Gigabit Ethernet network switch | Ethernet Splitter | sturdy metal w/ Shielded ports | life time | plug-and-play | traffic Optimization | unmanaged (TL-SG105).
- One Switch Made to Expand Network 5× 10/100/1000Mbps RJ45 Ports supporting Auto Negotiation and Auto MDI/MDIX
- Gigabit that Saves Energy Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money
- Reliable and Quiet IEEE 802.3X flow control provides reliable data transfer and Fanless design ensures quiet operation
- Plug and Play Easy setup with no software installation or configuration needed
- Advanced Software Features Prioritize your traffic and guarantee high quality of video or voice data transmission with Port-based 802.1p/DSCP QoS and IGMP Snooping
- Study Metal Case Fanless Quiet Design, Desktop or Wall-mounting Design. Operating Temperature: 0 degree Celsius 40 degree Celsius (32 degree Fahrenheit 104 degree Fahrenheit)
- Limited Lifetime Warranty Industry leading limited lifetime warranty and free 24/7 technical support
User questions & answers
| Question: | What port would you plug the lan cable coming from the router into on the 24 port gigaswitch |
| Answer: | It should work fine. Keep in mind this is a gigabit switch and cat8 would more typically be used for 10gb networking but its all compatible. |
| Question: | Is this model wall-mountable? Does it have the little "screw-guides" to hang it on the wall |
| Answer: | Your configuration should look like this: (Internet) Cable -> ARRIS TG1672G -> Port 1, 2, 3, or 4 -> Netgear 8-Port Switch Your Cable Modem provides 4 Gigabit Ethernet Ports and when you connect the Netgear 8-Port switch you lose 2 ports (one on the cable modem & one on the Netgear and end up with 10 Gigabit Ethernet Ports instead of 4. No configuration is needed. If one of the devices you're adding is a Wi-Fi router, then your configuration will look like this: (Internet) Cable -> ARRIS TG1672G -> Port 1 -> Wi-Fi Router -> Netgear 8-Port Switch. If you want all devices to be able to see each other, then you can have up to 7 of them plugged into the Netgear Router. |
| Question: | what is the difference between the smart switch and the unmanaged switch |
| Answer: | No. It's top speed is Gigabit (1000 Mbps), but it will work with 10/100 Mbps devices well. It's not just limited to Internet but any devices that wish to communicate with each other i.e. computer to Network Attached Storage (NAS) device, etc ... and usually those devices have gigabit Ethernet ports so they can communicate with each other at the gigabit speeds. |
| Question: | Does this have a web GUI or do I have to use the TP-Link software for configuration |
| Answer: | Make your flow as follows: Modem -> Wi-Fi Router -> Netgear 16-Port Gigabit Ethernet Switch. All your devices (up to 15 of them) will get their IP address from the Wi-Fi Router. You may also want to consider labeling your cables. I have two 16-port switches, one Unmanaged (for Internet) and one Managed (for private network), and all the cables are both color-coded and labeled. |
Product features
Gigabit Ports for More Reliable Speeds
Increase the reliability of your connected devices with the TL-SG105 5-port Gigabit desktop switch. 5x non-blocking gigabit ports enable instant transferring of large, bandwidth-intensive files without interference.
Multiple User Scenarios
The TL-SG105 Desktop Switch provides an easy way to increase the reliability of your network server connections. Whether needed for your home or office network, TL-SG105 helps you get business done easily.
A Switch Made to Connect
TL-SG105 can easily expand your network in a number of ways. Simply connect it to a WiFi device, such as a router or range extender, and transmit reliable internet to up to four connected devices to experience better performance.
Premium Quality. Longer Life.
TL-SG105 features a durable and sleek high-quality casing, innovative green technology to save energy, and shielded ports to prevent static interference when transferring files.
Plug and Play
The plug and play design makes set up easier than ever before, no IT professional required. Each port features the auto-negotiation feature to sense the link speed of a network device and intelligently adjust to ensure compatibility and the best performance.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - Home Network Hub, Office Ethernet Splitter, Plug-and-Play, Fanless Metal Housing, Desktop or Wall Mount
NETGEAR
Product description
The NETGEAR 5 Port Gigabit unmanaged Switch provides an easy, reliable, and affordable way to expand your network connections in homes and small offices. It is plug and play and features a rugged metal case. Features also include Auto MDI/MDI, LED indicator on Each port, energy effi¬cient technology, fan less design, auto negotiation and non blocking switching architecture.
- Plug and play: Simple setup with no software to install or configuration needed
- Versatile mounting options: Supports desktop or wall mount placement
- Silent operation: The Fanless design means zero added noise wherever its located, making it ideal for noise sensitive environments
- Peace of mind warranty – Covered by an industry leading 3 year limited hardware warranty
- Energy efficient: Designed to optimize power usage, lowering its cost to operate; Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode
- Built to last: Every Netgear Network switch is rigorously tested for reliability, quality, and performance
User questions & answers
| Question: | I am using cat 8 cables. Will this product work? If not what other switch do i need |
| Answer: | It should work fine. Keep in mind this is a gigabit switch and cat8 would more typically be used for 10gb networking but its all compatible. |
| Question: | Should this connect to arris tg1672g without any configuration on either side? the arris combines "..a 4-port gigabit router.." not working for me |
| Answer: | Your configuration should look like this: (Internet) Cable -> ARRIS TG1672G -> Port 1, 2, 3, or 4 -> Netgear 8-Port Switch Your Cable Modem provides 4 Gigabit Ethernet Ports and when you connect the Netgear 8-Port switch you lose 2 ports (one on the cable modem & one on the Netgear and end up with 10 Gigabit Ethernet Ports instead of 4. No configuration is needed. If one of the devices you're adding is a Wi-Fi router, then your configuration will look like this: (Internet) Cable -> ARRIS TG1672G -> Port 1 -> Wi-Fi Router -> Netgear 8-Port Switch. If you want all devices to be able to see each other, then you can have up to 7 of them plugged into the Netgear Router. |
| Question: | Do i have to have 1gig internet speed to have this or no |
| Answer: | No. It's top speed is Gigabit (1000 Mbps), but it will work with 10/100 Mbps devices well. It's not just limited to Internet but any devices that wish to communicate with each other i.e. computer to Network Attached Storage (NAS) device, etc ... and usually those devices have gigabit Ethernet ports so they can communicate with each other at the gigabit speeds. |
| Question: | how to get plug and play to work? 14 ports not putting out IP, have modem and wifi router connected, but cant get other ports to work |
| Answer: | Make your flow as follows: Modem -> Wi-Fi Router -> Netgear 16-Port Gigabit Ethernet Switch. All your devices (up to 15 of them) will get their IP address from the Wi-Fi Router. You may also want to consider labeling your cables. I have two 16-port switches, one Unmanaged (for Internet) and one Managed (for private network), and all the cables are both color-coded and labeled. |
Product features
Easy, Plug-and-Play Setup
Simply plug in your devices. No configuration or software required.
Energy Efficient Design
Energy efficient technology provides power savings for your home.
Backed by 3 Year Limited Product Assurance
Plus 90 day technical support 24 hrs/day, 7 days a week.
Trust the Networking leader
NETGEAR is the brand of choice when it comes to home networking solutions.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch, Desktop, 10/100/1000Mbps (GS205)
NETGEAR
Product description
The NETGEAR GS205 5-Port Gigabit Switch is an ideal switch for your home network. It automatically connects to your router or modem using any port. With its stylish case, quiet operation and plug-and-play setup, it is a perfect upgrade to any home network.
- ETHERNET PORT CONFIGURATION: 5 Gigabit ports
- PLUG-AND-PLAY: Simple set up with no software to install or configuration needed
- VERSATILE MOUNTING OPTIONS: Supports desktop or wall mount placement
- SILENT OPERATION: The fanless design means 0 added noise wherever its located, making it ideal for noise-sensitive environments
- BUILT TO LAST: Every NETGEAR network switch is rigorously tested for reliability, quality, and performance
- 5 10/100/1000 Mbps Gigabit Ethernet ports, up to 10x faster than Fast Ethernet for maximum performance
- Small and silent desktop form factor with fan-less design for quiet operation
Product features
Home & Small Business
Unmanaged: Plug and play solution to connect all your network devices without the complications of configuration or management software -- yet achieve a reliable and secure network.
Smart Managed Plus: Empowers growing small businesses with basic capabilities to configure, secure, and monitor their network beyond simple connectivity at an affordable cost - an ideal upgrade from unmanaged switches.
Small & Medium Business
Smart Managed Pro: For larger organizations requiring advanced configuration and refined control for secure setup, access, and management of complex business networks. Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic.
Smart Cloud: Provides fully integrated management, visibility, and control from any device, anywhere. Advanced configuration and remote access using the NETGEAR Insight app and cloud portal for unparalleled flexibility.
Enterprise
Fully Managed: An affordable, powerful, and future-proof networking infrastructure designed for enterprise and campus networks, with core and edge networking, and AV-over-IP solutions. Includes integrated security, high availability, delivery optimization, and enhanced manageability.
TP-Link Litewave 5 Port Gigabit Ethernet Switch | Desktop Ethernet Splitter | Plastic Case | Unshielded Network Switch | Plug & Play | Fanless Quiet | Unmanaged (LS1005G)
TP-Link
Product description
The TP-Link LiteWave Series Unmanaged Switches provide easy and affordable way to expand your wired network They are easy to use and reliable With these plug-and-play switches you can expand your network connections to multiple devices instantly With all ports supporting Auto-MDI/MDIX there’s no need to worry about the type of cable to use The LS1005G is fully compatible with network devices such as computers printers webcams IPTVs It has a wide range of application scenarios and is suitable for networking in school dormitories surveillance homes and small businesses
- 【One Switch Made to Expand Network】5× 10/100/1000Mbps RJ45 Ports supporting Auto Negotiation and Auto MDI/MDIX, greatly expand network capacity
- 【Gigabit that Saves Energy】Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money
- 【Reliable and Quiet】IEEE 802.3X flow control provides reliable data transfer and Fanless design ensures quiet operation
- 【Plug and Play】Easy setup with no software installation or configuration needed
- 【Ethernet Splitter:】Connect to your router or modem for additional wired connections (laptop, gaming console, printer, etc)
User questions & answers
| Question: | how far can I run a cat 5 line before I start losing my speed |
| Answer: | All the ports of an Unmanaged Ethernet Switch are plug and play. You can, therefore, plug into any of the 24 ports. |
| Question: | Can you plug an Ethernet cable in and send wires to two devices like a computer and Xbox. I have one Ethernet wall jack and I need two lines |
| Answer: | Yes, there are guides for mounting the unit. |
| Question: | Can Incoming ethernet cable from the router can be plugged into ANY of the 5 outlets? Other outlets connect out to TV, DVD, etc |
| Answer: | Unmanaged switches are plug and play - connect one of the ports to your existing LAN via Ethernet to receive additional physical Ethernet port connectivity via the switch. The Easy Smart variation offers some basic management features such as QoS for a Lag-Free Experience, IGMP Snooping for Multicast Optimization, and VLAN for Security. |
| Question: | Do I need to have a router for this to work |
| Answer: | The TL-SG108E has both a web GUI and software-based login options. For more information, please visit our official website to find the User Guide. Regards, TP-Link Support |
Product features
Gigabit Ports for More Reliable Speeds
Increase the reliability of your connected devices with the LS1005G 5-port Gigabit desktop switch. 5x non-blocking gigabit ports enable instant transferring of large, bandwidth-intensive files without interference.
A Switch Made to Connect
The LS1005G can easily expand your network in a number of ways. Simply connect it to a WiFi device, such as a router or range extender, and transmit reliable internet to up to four connected devices to experience better performance.
TP-Link 5 Port 10/100 Mbps Fast Ethernet Switch | Desktop Ethernet Splitter | Ethernet Hub | Plug & Play | Fanless Quiet | Desktop Design | Green Technology | Unmanaged (TL-SF1005D),White
TP-Link
Product description
TP-Link TL-SF1005D 5-Port Unmanaged 10/100M Desktop SwitchSupports IEEE 802.3x flow control for Full Duplex mode and backpressure for half-duplex mode Supports MAC address auto-learning and auto-aging Standards and Protocols: IEEE802.3, 802.3u, 802.3x, CSMA/CD, TCP/IP Ports: 5x 10/100Mbps Auto-Negotiation RJ45 ports (Auto MDI/MDIX) Basic Function: Wire-speed Performance MAC Address Auto-Learningand Auto-aging IEEE802.3x flow control for Full-Duplex Mode and backpressure for Half-Duplex Mode Backbound Bandwidth: 1Gbps MAC Address Table: 1kForwarding Rate: 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port 100Base-Tx: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100?? STP (maximum 100m) LED Indicator: Power, Link/Act (1, 2, 3, 4, 5) Safety & Emission: FCC, CE Power: External Power Adapter Transmission Method: Store-and-Forward Network Media: 10Base-T: UTP category3, 4, 5 cable (maximum 100m) EIA/TIA-568 100? STP(maximum 100m) Interface : 5 × 10/100Mbps RJ45 Ports , AUTO Negotiation/AUTO MDI/MDIX; Protocols Supported: IEEE 802.3i/802.3u/ 802.3ab/802.3x. External Power Supply: External Power Adapter (Output: 9.0VDC / 0.6A), Max Power Consumption: 1.9W, Max Heat Dissipation: 6.4 BTU/h.
- PLUG-AND-PLAY - Easy setup with no configuration or no software needed
- ETHERNET SPLITTER Connectivity to your router or modem router for additional wired connections (laptop, gaming console, printer, etc.)
- 5 Port FAST ETHERNET - 5 10/100 Mbps Gigabit auto-negotiation RJ45 ports greatly expand network capacity
- COST EFFECTIVE - Fanless Quiet Design, Desktop design
- RELIABLE - IEEE 802.3x flow control provides reliable data transfer
- UP to 68% Power Saving - Automatically adjusts power consumption according to the link status and cable length
- AUTO-NEGOTIATION - Supports Auto-MDI/MDIX, eliminating the need for crossover cables
- Unlimited 24/7 technical support for FREE
Product features
Plug and Play
The auto features of this Fast Ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network
Go Green with Your Ethernet
Have the choice to go green when expanding your wired network. The TL-SF1005D switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power.
High Performance and Reliability
The non-blocking switching architecture adopted in the 5-Port Fast Ethernet Switch improves network response times and significantly speeds up the traffic between subnets by forwarding and filtering packets at full wire speed for maximum throughput.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS105NA) - Desktop, and ProSAFE Limited Lifetime Protection
NETGEAR
Product description
The NETGEAR GS105NA Unmanaged Desktop Switch features 5 Port Gigabit Ethernet, ProSAFE Lifetime Protection and more.
- ETHERNET PORT CONFIGURATION: 5 Gigabit ports
- PLUG AND PLAY: Simple set up with no software to install or configuration needed
- VERSATILE MOUNTING OPTIONS: Supports desktop or wall mount placement
- SILENT OPERATION: The fanless design means zero added noise wherever its located, making it ideal for noise sensitive environments
- PROSAFE LIFETIME PROTECTION: Covered by an industry best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert
- ENERGY EFFICIENT: Designed to optimize power usage lowering its cost to operate; Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode
- BUILT TO LAST: Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
Product features
Home & Small Business
Unmanaged: Plug and play solution to connect all your network devices without the complications of configuration or management software -- yet achieve a reliable and secure network.
Smart Managed Plus: Empowers growing small businesses with basic capabilities to configure, secure, and monitor their network beyond simple connectivity at an affordable cost - an ideal upgrade from unmanaged switches.
Small & Medium Business
Smart Managed Pro: For larger organizations requiring advanced configuration and refined control for secure setup, access, and management of complex business networks. Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic.
Smart Cloud: Provides fully integrated management, visibility, and control from any device, anywhere. Advanced configuration and remote access using the NETGEAR Insight app and cloud portal for unparalleled flexibility.
Enterprise
Fully Managed: An affordable, powerful, and future-proof networking infrastructure designed for enterprise and campus networks, with core and edge networking, and AV-over-IP solutions. Includes integrated security, high availability, delivery optimization, and enhanced manageability.
TP-Link 8 Port Gigabit Ethernet Network Switch - Ethernet Splitter | Plug & Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Limited Lifetime Protection (TL-SG108)
TP-Link
Product description
TP-Link 8 Port Gigabit Ethernet Network Switch.
- 【One Switch Made to Expand Network】8× 10/100/1000Mbps RJ45 Ports supporting Auto Negotiation and Auto MDI/MDIX
- 【Gigabit that Saves Energy】Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money
- 【Reliable and Quiet】IEEE 802.3X flow control provides reliable data transfer and Fanless design ensures quiet operation
- 【Plug and Play】Easy setup with no software installation or configuration needed
- 【Advanced Software Features】Prioritize your traffic and guarantee high quality of video or voice data transmission with Port-based 802.1p/DSCP QoS and IGMP Snooping
- 【Study Metal Case】Fanless Quiet Design, Desktop or Wall-mounting Design. Operating Temperature: 0 degree Celsius ~40 degree Celsius (32 degree Fahrenheit ~104 degree Fahrenheit)
- 【Limited Lifetime Warranty】Industry leading limited lifetime warranty and free 24/7 technical support
Product features
Gigabit Ports for More Reliable Speeds
Increase the reliability of your connected devices with the TL-SG108 8-port Gigabit desktop switch. 8x non-blocking gigabit ports enable instant transferring of large, bandwidth-intensive files without interference.
Multiple User Scenarios
The TL-SG108 Desktop Switch provides an easy way to increase the reliability of your network server connections. Whether needed for your home or office network, TL-SG108 helps you get business done easily.
A Switch Made to Connect
TL-SG108 can easily expand your network in a number of ways. Simply connect it to a WiFi device, such as a router or range extender, and transmit reliable internet to up to seven connected devices to experience better performance.
Premium Quality. Longer Life.
TL-SG108 features a durable and sleek high-quality casing, innovative green technology to save energy, and shielded ports to prevent static interference when transferring files.
Plug and Play
The plug and play design makes set up easier than ever before, no IT professional required. Each port features the auto-negotiation feature to sense the link speed of a network device and intelligently adjust to ensure compatibility and the best performance.
NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch, Desktop, Internet Splitter, Fanless, Plug-and-Play (GS208)
NETGEAR
Product description
The NETGEAR GS208 8-Port Gigabit Switch is an ideal switch for your home network. It automatically connects to your router or modem using any port. With its stylish case, quiet operation and plug-and-play setup, it is a perfect upgrade to any home network.
- ETHERNET PORT CONFIGURATION: 8 Gigabit ports
- PLUG-AND-PLAY: Simple set up with no software to install or configuration needed
- VERSATILE MOUNTING OPTIONS: Supports desktop or wall mount placement
- SILENT OPERATION: The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments
- BUILT TO LAST: Every NETGEAR network switch is rigorously tested for reliability, quality, and performance
- 8 10/100/1000 Mbps Gigabit Ethernet ports, up to 10x faster than Fast Ethernet for maximum performance
- Small and silent desktop form factor with fan-less design for quiet operation
User questions & answers
| Question: | will this support an internet connection at 1000 mbps to multiple devices |
| Answer: | No you have to buy any cable you may need |
| Question: | Can it be mounted on a wall, does it have mount holes on the bottom |
| Answer: | No. The Cudy device is a Layer-2 switch. To share internet between two computers, you need a Router, which is a Layer-3 device. |
| Question: | what is the difference between NETGEAR 5-Port FS205 - NETGEAR GS105 ProSafe 5port- 10/100/1000 Mbps? thanks |
| Answer: | It runs off a DC 5V 0.5A power supply with a barrel connector. It may be possible to solder a USB plug instead of the power brick and power it, it should work, but I haven't tried it. |
| Question: | What's the difference in performance between NETGEAR 5-Port FS205 versus NETGEAR 5-Port Gigabit GS205? One is 5 Port 10/100Mbps vs Gigabit. Meaning |
| Answer: | With an Ethernet switch, you use 1 port as the input and it will output to the other ports (in this case 4 ports) which can be used simultaneously. |
Product features
Home & Small Business
Unmanaged: Plug and play solution to connect all your network devices without the complications of configuration or management software -- yet achieve a reliable and secure network.
Smart Managed Plus: Empowers growing small businesses with basic capabilities to configure, secure, and monitor their network beyond simple connectivity at an affordable cost - an ideal upgrade from unmanaged switches.
Small & Medium Business
Smart Managed Pro: For larger organizations requiring advanced configuration and refined control for secure setup, access, and management of complex business networks. Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic.
Smart Cloud: Provides fully integrated management, visibility, and control from any device, anywhere. Advanced configuration and remote access using the NETGEAR Insight app and cloud portal for unparalleled flexibility.
Enterprise
Fully Managed: An affordable, powerful, and future-proof networking infrastructure designed for enterprise and campus networks, with core and edge networking, and AV-over-IP solutions. Includes integrated security, high availability, delivery optimization, and enhanced manageability.
NETGEAR 24-Port Gigabit Ethernet Unmanaged PoE Switch (GS524PP) - with 24 x PoE+ @ 300W, Desktop or Rackmount, and Limited Lifetime Protection
NETGEAR
Product description
The new NETGEAR 24-port Gigabit Ethernet Unmanaged High-power PoE+ Switch (GS524PP) offers 300W power budget. It’s ideal for powering and connecting VoIP phones, wireless access points, IP Cameras and IoT devices. It has desktop or rackmount for flexible placement. The GS524PP gives you a highly cost-effective and powerful switch with the best cost/PoE budget ratio. It also comes with NETGEAR limited lifetime warranty and 24/7 lifetime chat for complete peace of mind.
- 24 Gigabit Ethernet ports
- 24 PoE+ ports with 300W total power budget
- Simple plug-and-play setup with no software to install or configuration needed
- Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.
- Lifetime Limited Hardware Warranty, Next Business Day Replacement, and 24/7 chat with a NETGEAR expert
- Energy efficient design compliant with IEEE802.3az
- Quiet Operation
Product features
Compare Similar NETGEAR Switch Models
.
Tripp Lite 24-Port Gigabit Ethernet Switch Rackmount Metal 1U, 2 Gigabit SFP Ports 10/100/1000Mbps (NG24)
Tripp Lite
Product description
The NG24 24-Port 10/100/1000 Mbps 1U Rack-Mount/Desktop Gigabit Ethernet Unmanaged Switch adds 10/100/1000 Mbps Ethernet capacity to your home office, small office, workgroup or creative production environment. Share large bandwidth-intensive files, such as CAD drawings and videos, at Gigabit speeds, improving efficiency and cutting costly downtime.
This rack-mount/desktop switch features 24 twisted-pair RJ45 Gigabit Ethernet ports that support auto-negotiable 10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions. Dual mini-GBIC SFP ports allow connection to other switches using optical fiber or copper. No configuration is required, so you can have your Gigabit network up and running immediately. Easy-to-read LEDs indicate connection and activity status for each port. IEEE 802. 3x flow control allows smooth transmission of large files. The NG24 supports IEEE 802. 3az Energy Efficient Ethernet standards by putting unused ports into a low-power state without interrupting network connections. It consumes very little input power—just 20 watts max. The detachable five-foot input cord with NEMA 5-15P plug connects to a protected UPS, generator or mains input AC source. The heavy-duty metal housing is designed for desktop installation or mounting into 1U of an EIA-standard 19-inch rack with the included brackets. 5-year Limited Warranty .- 24 twisted-pair RJ45 Gigabit Ethernet ports
- 2 mini-GBIC SFP ports
- Automatically shifts unused ports to low-power state without interrupting network connection
- 52 Gaps switching capacity (2 Gaps per port with full duplex)
- 5-Year Limited Warranty
User questions & answers
| Question: | how long is the product when the brackets are attached |
| Answer: | No |
| Question: | Is the switch suitable for 4K tv and gaming |
| Answer: | Did NOT work for me |
| Question: | Will any of the ports provide Internet connection to a router, or is there only 1 uplink port please |
| Answer: | No. These cables do not work at all. Find a different buyer. |
| Question: | Plugging a router into this with 4 devices with provide internet access and IP addresses to those devices, correct |
| Answer: | Yes, it does. |
Product features
Smart Investment for Faster Speeds
Network-attached storage, cloud computing, VoIP and video streaming are just a few of the data-intensive applications that can overwhelm outdated networks. If you’re still using switches limited to 10/100 megabit speeds, it’s time to upgrade and finish projects quicker with a blazing-fast Gigabit Ethernet switch. Studies conducted by eTesting Labs found that upgrading from 100 megabit to gigabit speeds at the desktop increased performance and productivity more than 300% for typical business tasks, and even bigger returns are possible for the most data-intensive applications.
Gigabit Speed for Small/Medium Networks
This cost-effective network switch was designed for the needs of small/medium businesses and IT/facility managers. It combines easy setup, blazing-fast network speeds, trouble-free operation and rock-solid reliability with outstanding value.
Stress-Free Network Setup
Unmanaged Ethernet switches provide plug-and-play network convenience. Simply connect your network cables, and your Gigabit network is ready to go. Easy-to-read LEDs communicate port-by-port network activity at a glance. If you ever need to expand your network, it only takes a moment to connect more switches or tie into the network backbone through the SFP fiber uplink ports.
Power-Saving Ethernet Ports
This energy-efficient network switch sets inactive ports to a power-saving standby mode. It also optimizes energy used by active ports to match cable length. This happens automatically, without any reduction in speed or reliability. In fact, energy-efficient switches typically last longer because they run cooler.
TP-Link 48 port gigabit PoE switch | 48 PoE+ Port @384W, w/ 4 SFP Slots | Smart Managed | Limited Lifetime Protection | Support L2/L3/L4 QoS, IGMP and LAG | IPv6 and Static Routing (T1600G-52PS)
TP-Link
Product description
48 PoE+ ports (802.3af/at) providing up to 30W per port/ 384W total PoE power supply for multi-use(wireless access points, VoIP phone, IP Camera) 48 Gigabit ports to provide 2 Gbps of dedicated, non-blocking bandwidth per port Configure VLAN, Static Routing, QoS, IGMP Snooping, Link Aggregation (LAG), STP/RSTP/MSTP, LLDP, LLDP-MED,Web-based GUI, SNMP, rate limiting and traffic monitoring on the switch ACL, IP-MAC-Port Binding, 802.1x and Radius Authentication, Port Security, Storm Control, SSL and SSH encryptions and Dos Defend for your Network Security Segment your network and prioritize your traffic Add intelligence to your network beyond what unmanaged switches can provide IPV6 Support. 1U Rackmountable form factor LIMITED LIFETIME WARRANTY and 24/7 Tech Support from TP-Link Interface Available: 16 x 10/100/1000Mbps RJ45 Ports, AUTO Negotiation/AUTO MDI/MDIX; Internal Memory: 4.1Mbit; Protocols Supported: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3x IEEE 802.1q IEEE 802.1p; System Requirement: Microsoft Windows for running Utility
- 48× PoE+ (802.3at/af) ports providing up to 30W per port, total PoE budget 384W and useful PoE power management Features
- L2+ Feature: Static Routing, helps route internal traffic for more efficient use of network resources. Power Consumption: Maximum (PoE on): 470.4 Watts (220 Volts /50 Hertz),Maximum (PoE off): 46.5 Watts (220 Volts /50 Hertz)
- IP MAC Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X and Radius Authentication provide you robust security strategies
- L2/L3/L4 QoS and IGMP snooping optimize voice and video applications.IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery
- System requirement:Microsoft Windows XP, Vista or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
- Power Supply: 100~240VAC, 50/60 Hertz
User questions & answers
| Question: | Is there a specific to connect this switch to a router? Would one cable connect the whole switch, or is it segmented |
| Answer: | Thank you for reaching out about the NG16. With the brackets attached this unit is 19 inches long. If you would like to talk through your application, please contact our Chicago-based Presales Applications Team and they will happily assist you. |
| Question: | The 48 port peo version for a small office running pcs phones and video cameras will this work right out of the box or does it need programming |
| Answer: | Yes. 4k minimum streaming bit rate is 16Mbp/sec. This is a gigabit switch which is 1000Mpb/sec. |
| Question: | Is it better to go with 2 - 24 port poe or 1 - 48 port poe |
| Answer: | It's an unmanaged switch. Any port will act as an up/down link. You will have to use it in conjunction with a router to "route" network traffic. |
| Question: | is this a managed switch |
| Answer: | Thank you for reaching out about the NG8POE. Yes, if you plug a router into the NG8POE switch it will provide internet access to the connected devices. If you would like to talk through your application, please reach out to our Chicago-based Presales Applications Team at 773-869-1773 (M-F 8AM-6PM Central) or [email protected]. |
Product features
JetStream 48-Port Gigabit Smart PoE+ Switch with 4 SFP Slots
802.3at/af PoE+
48 802.3at/af PoE ports allow the product to work with wireless access points, surveillance cameras, IP phones and other PoE supported devices without the need for additional power cabling.
Secure Networking
Protect against threats such as broadcast storms and ARP attacks with integrated IP-MAC-Port Binding, Port Security, Storm Control and DHCP Snooping.
Abundant L2/L2+ Features
An array of L2 features are supported, including 802.1Q tag VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x Flow Control. The switch also provides advanced features for network maintenance, including Loopback Detection and Cable Diagnostics.
Enterprise Level Management
Configure basic management features via the intuitive web interface (GUI), or use industry-standard Command Line Interface (CLI), SNMP (v1/v2c/v3) or RMON.
Latest Reviews
View all
Frozen Fish
- Updated: 02.02.2023
- Read reviews
Baitcasting Techniques
- Updated: 30.01.2023
- Read reviews
New Shoe Polish Brands
- Updated: 09.04.2023
- Read reviews
Marine Stereos
- Updated: 02.06.2023
- Read reviews
Barcode Software Professionals
- Updated: 19.05.2023
- Read reviews