9 best 4g antennas
4G antennas are crucial components of wireless communication networks that enable devices to connect to and access 4G (fourth-generation) cellular data services. These antennas play a vital role in improving signal strength, stability, and overall network performance. Here's what you should know about 4G antennas:
Purpose: 4G antennas are designed to transmit and receive radio signals within the 4G frequency band, which is used by cellular networks to provide high-speed mobile data connectivity. These antennas help improve the quality and reliability of 4G connections for smartphones, tablets, routers, and other devices.
Types of 4G Antennas:
- Internal Antennas: These are built into devices like smartphones and tablets, offering compact and integrated solutions.
- External Antennas: These are standalone antennas that can be connected to devices or routers via ports like SMA or N-type connectors. External antennas are often used to boost signal strength in areas with weak network coverage.
Directionality:
- Omni-Directional Antennas: These antennas radiate signals in all directions, making them suitable for devices that may move around or for general network improvement.
- Directional Antennas: These antennas focus their signal in a specific direction, offering greater range and improved signal strength in that direction. They are often used for fixed installations.
Gain: Gain refers to the antenna's ability to amplify the signal. Higher gain antennas can improve signal strength but may have a narrower coverage area. It's important to choose an antenna with the right gain for your specific use case.
MIMO (Multiple Input, Multiple Output): Many 4G antennas support MIMO technology, which involves using multiple antennas for both transmission and reception. MIMO can significantly improve data throughput and network performance.
Mounting Options: Depending on the application, 4G antennas can be mounted indoors or outdoors. Outdoor antennas are typically more robust and weather-resistant.
Frequency Bands: 4G networks operate on various frequency bands, which may vary by region and carrier. Ensure that the antenna you choose supports the frequency bands used by your cellular provider.
Cable Length: When using external antennas, the cable length between the antenna and the device or router is crucial. Longer cables can lead to signal loss, so it's essential to choose the appropriate cable length.
Compatibility: Check the compatibility of the antenna with your specific device or router. Ensure that the connectors match and that the antenna supports the necessary frequency bands.
Installation: Proper installation of 4G antennas is essential for optimal performance. Follow the manufacturer's guidelines for installation and positioning.
4G antennas are valuable tools for improving cellular data connectivity, especially in areas with weak signal strength or for devices that require stable high-speed data connections.By selecting the right type of antenna with the appropriate features, you can enhance your 4G network experience.
Below you can find our editor's choice of the best 4g antennas on the marketProduct description
Specifications:
Gain: 10-12dBi;
Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz;
VSWR: < 2.0;
Impedance: 50 ohm;
Direction: Omni-directional;
Feature: Fixed Wall Mount;
Antenna connector: Dual SMA male;
Cable Length:2x5M RG174 Cables;
Dimensions: Appox.23 X 6.5 X 6.5CM;
Operating Temperature: -20°С ~ +80°С;
Storage Temperature: -30°С ~ +85°С;
Package List: 1 x Antenna Kit; (As the Picture Shown)
Note: The installation mast is not included, only the Antenna kit
- Frequency Range: 698 - 2700 MHz; Gain:10-12dBi; Direction: Omni-directional; Cable Length: 2x5 meter; Cable Type: RG174; Antenna Connector:Dual SMA Male(pin inside).
- If you are not sure whether it applies to your device, please contact us for help.
- Please check your equipment before buying: This antenna is Dual SMA male connector, Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz. Note: The installation mast is not included, only the Antenna kit
- Compatible with: Huawei 4G LTE Wireless Router B525 B525S B315 B593 B880 B890 B310 E5186 E5175; ZTE MF28G MF28D MF288 MF286 MF285 MF283 MF275U MF275R MF25D Z723EL WF721 MF279;
- EASY TO INSTALL: Designed for exterior installation, the 4g antenna from features a rugged waterproof structure that's designed to withstand damage from the elements.This package includes two U-bolt brackets for 1.5- to 2- inch pipe or mast.It can easily be set up in an outdoor space including home rooftops, utility poles, surveillance trailers, office and anywhere else you want.
- Installation Reminder: When installing this Omni-directional antenna, please keep it as vertical as possible, In order to get a better signal, please keep the antenna as free as possible (especially the metal baffle) and high enough.
- Before use, please turn off the power of your device, then plug in the antenna, and then turn on the power again.
User questions & answers
Question: | Is this compatible with the GL x750 spits |
Answer: | |
Question: | Would this unit work with a dual 700mhz band 12/13/17 cellular repeater amplifier kit? looking to switch the directional antenna to omnidirectional |
Answer: | |
Question: | Will this work with two separate Wifi cameras? are the internal antennas cross polarized |
Answer: | Hello, This is not compatible with the GL x750 spits, This antenna is not suitable for wifi devices. |
Question: | can i use rg6 extention cable |
Answer: | yes |
Question: | Can it be pluged into a 115 moble home outlet |
Answer: | This is can not be work with wifi camera, Their frequency bands are different. |
Question: | What are the dimensions?, there are no specs. For this item. Height, width |
Answer: | Hello, RG6 Cable is 75 OHM, so RG6 cannot be used. |
Question: | Is it 18.6 wide and 12.8 tall |
Answer: | do not know |
Question: | Is a window install kit included |
Answer: | was about 900 |
- CHHLIUT TS-9 Connector Antenna High Gain 20dbi Can be used for 4G LTE GSM GPRS 3G 2.4GHZ WCDMA network signal reception and transmission.
- Frequency Range: 698-960/1710-2700MHZ ; Polarization:Vertical ; Directionality: omni directional
- No drivers: no additional drivers are required to install the antenna, you can use this antenna for enhanced signals for outdoor activities, easy to install.
- Antenna Height:295mm,Base diameter2.45in,RG174 cable:9.8ft
- Includes 20 dBi High Gain Omni Antenna + Magnetic Mounting Base + Coax Cable with Adapter for TS9 Modems
User questions & answers
Question: | Will this antenna work with a We boost Celular amplifier |
Answer: | I emailed contixo and they were able to send me another charger. |
Question: | where is it made |
Answer: | I also bought this for my son for Christmas and he’s only used it five times and today it decided to just go black. Can’t turn it on. Can’t reset. Can’t do anything. The battery was fully charged. No reason whatsoever for it to mess up. Definitely not happy! |
Product features
4G lte antenna ts9 Connector
TS9 Antenna 4G LTE GSM GPRS 3G 2.4GHZ WCDMA Antenna 20DBi High Gain Omni Directional Antenna with Magnetic Stand Base 9.8ft RG174 Extension Cable
Mechanical Properties:
- Connector Type:TS-9
- Cable:RG174
- Line Length:9.8 ft
- Size:11.6 in
- Line Length:9.8 ft
- Base diameter:2.45in
- Radiation:Omnidirectional
- Polarization Type:Vertical Work Temp(℃):(-40℃-60℃)
- Weight:8.6 ounces
Magnetic mount
Strong magnetic suction cup adsorption fixed
Antenna component
- 1×4G lte antenna
- 1×magnet(9.8ft)
Product description
Keep your mobile phones connected and be accessible wherever you are with this Wide Band Directional Antenna with N-Female Connector from WeBoost. It’s guaranteed to give you the strongest signal strength, and you can make your purchase without any risk with our money-back guarantee.
This signal booster lets you experience unmatched data speeds and unparalleled mobile signal strength in areas where you once had poor coverage. It has a wide frequency range that includes 3G and 4G LTE areas, letting you make calls or send messages whenever you need to and connect to the internet in virtually any remote location. It also works on all carriers: AT&T, T-Mobile, Verizon, Sprint, and U.S. Cellular. It boosts signals up to 32 times their current strength, giving you crystal-clear call quality, so no more dropped calls.
This signal booster has an N-Female connector with a threaded, weatherproof structure. It lets your mobile phone receive large volumes of data quickly. It can also capture exterior signals and amplify them in your car, home, or office. As a trusted brand of homeowners, professionals, rescue teams, and police stations, our products provide the most powerful cellular signal available, so you will always be within reach, especially when it matters most.
Our products come with 7-day support and a 2-year warranty. Our highly trained technical staff will provide you with all the assistance you need to get familiar with the device. WeBoost is committed to improving the lives of our customers. This device gives you network reach like never before. But if you aren’t satisfied with your purchase, we’ll be happy to give you a full refund within 30 days.
Invest in this premium signal-boosting device now, and stay connected no matter where you are with the Wide Band Directional Antenna with N-Female Connector!
- COMPATIBILITY: This Wilson Electronics Wideband Directional Antenna is compatible with all US carriers including: AT&T, T-Mobile, Verizon, SPRINT, Straight Talk, U.S. Cellular and many more. *Government regulations in the U.S. prohibit boosting a particular frequency used by some of the Sprint network. Most Sprint customers still see performance improvement from Wilson Electronics directional antennas.
- VERSATILITY: The Wilson Electronics Wideband Directional Antenna supports multiple devices so that everyone can experience enhanced 4G LTE and 3G signals. It features up to +10.6 dB gain.
- OUTSIDE CELLULAR ANTENNA FOR SIGNAL BOOSTERS: The Wilson Electronics Wideband Directional Antenna boosts your 4G LTE and 3G signal up to 32X for fewer dropped calls, higher audio quality, and faster uploads and downloads.
- PREMIUM QUALITY: This Wideband antenna features an N-Female connector that facilitates the transfer of high-frequency information. The female connector can quickly receive large amounts of data and works at radio frequencies in the multi-megahertz range.
- FRUSTRATION FREE SETUP: Designed for exterior installation, this Wideband directional antenna from features a rugged waterproof structure that’s designed to withstand damage from the elements. This package includes a tilt-and-swivel mast bracket for 1.25- to 2-inch pipe or mast, allowing you to easily attach the antenna to the exterior of a building.Polarization:Vertical
User questions & answers
Question: | If it is being plugged directly into a 4g modem, would an amplifier still be needed, or does the modem work as the amplifier |
Answer: | Dear customer I am glad to answer your question. As you would hope, our freezer has an upper storage basket. If you have any questions, please feel free to contact us by email [email protected]. |
Question: | Will this work with mofi 4500 on att |
Answer: | Dear customer I am glad to answer your question. The temperature adjustment range is -12 to -30 ℃. If you have any questions, please feel free to contact us by email [email protected]. |
Question: | Is wilson electronics wideband directional antenna 700-2700 mhz, 50 ohm (314411) compatible with weboost drive 4g-x rv |
Answer: | We don't recommand wash it by dishwasher, please clean it with wet cloth, thank you. |
Question: | How does it connect to a phone? Samsung smart phone |
Answer: | Yes |
Product features
Specifications
- Connector: N-Female
- Dimensions / Boxed (in): 11.75x8.25x2.50 / 13.50x8.25x3.25
- Weight / Boxed (lb): 1.8 / 2.0
- Wind loading area (sq ft): ≤ 2.13
- Rated wind velocity (mph): 90
- Mounting mast diam. (in): 1.5-2.0
- Radiator material: aluminum
- Radome material / color: ABS Anti UV / White
- Water resistance: IPX Weather rated
- Operating temperature (°C/F): -40 to +55 / -40 to +131
Electrical
- Frequency range (MHz): 698-960 / 1710-2700
- Polarization: Vertical / Horizontal
- Gain (dBi): 8.5 Avg / 9.5 Peak
- Half-power beam width (°): Low Band: 100-109 Horizontal, 65 Vertical
- Half-power beam width (°): High Band: 70-85 Horizontal, 55 Vertical
- Front-to-back ratio (dB): ≥ 10 AVG
- Impedance (Ω): 50
- VSWR: ≤ 1.6:1 / 1.4:1 avg
- Maximum input power (W): 100
- Lightning Resistance: DC Ground
Product description
2 Pack of identical antennas & bases
Includes Proxicast's 4G/LTE high-gain omni-directional antenna + extra large 3 in. magnetic antenna base with 79 in. (6.6 ft) of low-loss coax cable and TS9 plug.
The detachable polycarbonate antenna swivels 90 degrees and rotates 360 degrees; magnetic base and long coax cable allow optimal positioning for maximum signal reception.
Compatible with many 4G/LTE modems having TS9 external antenna connectors including (partial list):
AT&T
Nighthawk / Netgear MR1100 / M1
USB800
Unite Express 2 (AC797S)
Unite Express (AC779S)
Unite Explore (AC815S)
Unite Pro (781S)
Velocity 2 / ZTE MF985
Velocity / ZTE MF861,MF923
Beam / Netgear 340U
Momentum / Sierra 313U
Unite / Netgear AC770s
Elevate / Sierra 754S
Verizon
JetPack AC791L, MiFi 6620L, 7730L, 8800L
Novatel 551L, U620L, USB730L
Novatel USB760
Pantech MHS291L, MHS800L
Sprint
MiFi 8000
Fuse
Zing (771S)
Netgear 341U
T-Mobile
Huawei E587 Sonic
UMG366 Jet 2.0
ZTE MF61
Netgear
LB2120, LB1121, LB1120
Electrical Properties
Impedance: 50 ohms
Peak Gain: 8 dBi
Radiation: Omni
Ground Plane: Integrated
Mechanical Properties
Connector: TS9 (plug)
Material: Polycarbonate / Steel / Brass / Rubber
Op. Temp: -30 to +75C
Coax Cable: 79 in / 200 cm LMR100 Low Loss
Overall Height: 13.25 in. / 33.7 cm
Diameter Base: 3 in. / 70 mm
Diameter Antenna: 0.51 in. / 13 mm
Small hole on the top of the antenna is by design and is not a defect.
LTE devices should use 2 identical antennas for best results.
High gain antennas are appropriate when signal strength is below 60%.
CAUTION:
TS9 connectors do *NOT* fit all the way into the modem's external antenna port. See the image gallery for correct installation.
Since 2000, USA-based Proxicast has been manufacturing innovative professional grade wireless equipment
- BOOSTS Signal Strength and Data Speed of 4G/LTE Connections
- COMPATIBLE with Any USB Modem, Router or Hotspot with a TS9 External Antenna Jack
- ENABLES Antenna to be Positioned for Maximum Signal Reception
- CONNECTS Directly to Modem's External Antenna Port (see images). Use 2 antennas for diversity/improved signal quality
- INCLUDES 8 dBi High Gain Omni Antenna + 3" Magnetic Mounting Base + 79" Coax Cable with TS9 Plug
User questions & answers
Question: | return policy |
Answer: | The return policy was fine. No problems. |
Question: | Can this be connected to an iphone se with verizon service? if so, how and will it do any good in weak signal areas |
Answer: | No. iPhones do not have external jacks where antennas can be attached. If you need to improve the signal coverage in your home (or other fixed area) you need a powered booster. See: https://amzn.to/3oPMob0 |
Question: | Is it possible to hook this into rv coax hookup? what adaptor would i need |
Answer: | From Proxicast:S. Cuttle is correct, you should not mix 75 ohm CATV coax with 50 ohm RF coax. Even taking into account the extra signal loss from the mismatched impedance, you would have to have a custom cable made since CATV has "F" connectors whereas our antenna has SMA connectors. |
Question: | for a 313u would I buy one or two? Why |
Answer: | From Proxicast:The Sierra Wireless 312U, 313U, 320U, 330U and Netgear 340U/341U modems all have 2 external antenna ports - a primary antenna port and diversity antenna port. By removing the back cover, the primary antenna port is indicated with the #1 and the diversity port is #2.If you are using only 1 antenna, connect it to port #1.The diversity antenna port can be used to further improve cellular signal quality, especially in noisy or low-signal conditions or where signal "multi-path" interference is present. Signal multi-path is when the cellular radio signal reflects off of nearby surfaces causing multiple copies of the signal to arrive at the antenna at slightly different times. This is common in indoor locations or outdoor urban settings.A diversity antenna is most beneficial when using omni-directional antennas. If used, the diversity antenna should be exactly the same as the primary antenna and positioned away from the primary antenna.For 800 MHz networks, the optimal separation is approximately 22 inches, 35 inches or 48 inchesFor 1900 MHz networks, the optional separation is approximately 10 inches, 16 inches or 22 inches.Check with your cellular operator regarding the frequency in use at your location. |
Product description
Specifications:
Gain: 10dBi
Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz
For Building Home Office Indoor Cellular, Vehicle Car Truck RV Bus Van Mobile;
VSWR: < 2.0;
Polarization: Linear Vertical;
Impedance: 50 ohm;
Direction: Omni-directional;
Feature: Fixed Pole Mount;
Antenna Interface Connector: N Type Female Connector;
Net Weight: 465g;
Waterproof: Rainning Proof;
Operating Temperature: -20°С ~ +80°С
Storage Temperature: -30°С ~ +85°С
Package List: 1 x Antenna, with Fixed Bracket Mounting Kit & Screws Accessories(As the Picture Shown)
Compatible with Home Office Indoor, Vehicle Car Truck RV Bus Van Mobile Cellular;
- Gain: 10dBi; Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz; Fixed Pole Mount;
- Omni-directional; N Type Female Interface Connector; Waterproof: Rainning Proof;
- Package List: 1 x Antenna, with Fixed Bracket Mounting Kit & Screws Accessories(As the Picture Shown)
- For Building Home Office Indoor Cellular, Vehicle Car Truck RV Bus Van Marine Boat Mobile;
- Compatible with Verizon, AT&T, Sprint, T-Mobile, US Cellular, Bell, Rogers, Telus, Telcel, Movistar, Digicel and many other cellular operators worldwide.
User questions & answers
Question: | Is this possible to use for indoor antenna after the booster? i am using inside panel then using yagi antenna outside my house. thanks |
Answer: | It is designed for use to 360 deg coverage best used for outdoor for better performance. It meant to replace the yagi you are using before the booster. If you need to further boost the signal then you add an booster box and this can be installed before or after your current booster box hope that helps. |
Question: | Will this work with netgear lb1120 sim modem |
Answer: | I don’t know, I returned the one I ordered. |
Question: | With n to sma cable can this be directly connected to 4g hotspot (not amplifier/repeater |
Answer: | Yes, with the proper cables. |
Question: | How do you determine the serial number |
Answer: | I gave it as a gift to a friend of mine that used it on his deer lease I don't know |
- Frequency Range: 698 - 2700 MHz; Gain:11dBi; Direction: Directional; Antenna Cable Length: 2x5 Meter RG58 Cable; ; Antenna Connector:Dual SMA Male(pin inside);Impedance: 50 ohm
- Works on 3G, 4G, LTE, GSM & CDMA cellular services with SMA Male connection includes Sierra Wireless Verizon AT&T,Netgear Sprint,Novatel Wireless Verizon
- Cross Polarized-The antenna features two independent antennas with cross-polarization, increases signal strength and data speeds for remote sites with poor cellular signal coverage.
- Compatible with: Huawei 4G LTE Wireless Router B525 B525S B315 B593 B880 B890 B310 E5186 E5175; ZTE MF28G MF28D MF288 MF286 MF285 MF283 MF275U MF275R MF25D Z723EL WF721 MF279 MOFI 4500 Router.
- EASY TO INSTALL: Designed for exterior installation, the 4g antenna from features a rugged waterproof structure that's designed to withstand damage from the elements.This package includes two U-bolt brackets for 1.5- to 2- inch pipe or mast.It can easily be set up in an outdoor space including home rooftops, utility poles, surveillance trailers, office and anywhere else you want.
- Installation Reminder: This directional antenna(one plastic side) must be pointed toward a cell tower.In order to get a better signal, please keep the antenna facing the signal tower as free of obstacles and high enough.
Product features
Dual Polarized Directional LTE MIMO Antenna
- Dual cross-polarized 75 degree transmitting and receiving,enabling connection to distant cell towers for LTE resulting in higher performance.
- ABS+ Aluminum rugged housing ,heavy duty mounting hardware and corrosion-resistant materials are ideal for outdoor applications.
- Works on 3G, 4G, LTE, GSM & CDMA cellular services, includes Sierra Wireless Verizon AT&T,Netgear Sprint,Novatel Wireless Verizon.
Directional Antenna Installation Tips
- Please turn off the power of the signal equipment before use, and then connect the antenna.
- Determine location of nearest cell tower.
- Mount antenna to 2.0 inch max diameter mast or to wall as high as possible.
- keep the antenna facing the signal tower.
- Adjust antenna position left/right and up/down tilt to find optimal signal.
- Point away from:other antennas,trees & buildings,large vertical metal or concrete objects.
Note
- Use 50 Ohm RF coax cables. DON’T Use RG59/RG6 coax (75 Ohm cable) – signal will be seriously degraded
- This antenna is for direct-wired connection to cellular data devices with 2 antenna connectors.Keep cables as short as possible.DON’T Use a splitter to connect 1 modem port to both antenna leads.
- This directional antenna(one plastic side) must be pointed toward a cell tower.In order to get a better signal, please keep the antenna facing the signal tower as free of obstacles and high enough.
- MIMO PERFORMANCE from omni-directional elements with 6 dBi peak gain on 4G/LTE cellular networks
- ENHANCED DATA SPEEDS for remote sites with poor cellular signal coverage
- DUAL FEMALE N CONNECTORS integrated to antenna base *** REQUIRES 2 COAX EXTENSION CABLES ***
- EXTREMELY RUGGED weatherproof housing and corrosion-resistant materials
- HEAVY DUTY pole mounting bracket and hardware included (mast sold separately)
User questions & answers
Question: | what all do i need as in adapters to hook this to netgear unite 770s mobile hotspot |
Answer: | You will need 2 TS9 pigtails to plug into the hotspot: https://amzn.to/2XSXEFI You will also need 2 50 Ohm SMA Male to N Male coax cables. We offer various lengths, with the cable size increasing with length: https://amzn.to/2GHkWHj Finally, if you plan to mount the antenna outdoors, you must weatherseal the cable connection to the antenna: https://amzn.to/2DC1RW |
Question: | Is there a max distance this can be placed away from your 4g router that it looses strength |
Answer: | Coaxial cable loses signal as the length of the run increases and as the diameter of the shielding decreases. Always use the shortest, thickect coax cable possible (consider relocating your router for cable runs longer than 25 ft). Be sure to use low-loss 50 ohm coax specifically designed for the high frequencies used in cellular communication (not RG-class coax). See: https://amzn.to/2MxMSQD |
Question: | Could this be mounted on 2" diameter PVC |
Answer: | Yes. The included U-Bolts can handle up to 3.75" diameter masts. The mast in the photographs is 1.25 inches in diameter. Note that the antenna weighs over 6 pounds, so take that into consideration when selecting the thickness and length of the PVC pipe you intend to use. |
Question: | Is this better than two 10dbi antennas run in mimo |
Answer: | This antenna has a lower peak gain than a 10 dBi omni antenna, but it only requires a single mount and does not require the physical separation (typically at least 2 ft) that is necessary for having 2 non-MIMO omni-directional antennas connected to the same LTE modem. |
Product features
OMNI-DIRECTIONAL MIMO PERFORMANCE
- Proxicast's Pro-Gain Omni MIMO antenna sends and receives signal in all directions unlike directional 4G/LTE MIMO panel & yagi antennas that require time-consuming effort to position
ENHANCED DATA SPEEDS WITH MIMO
- MIMO technology allows cellular modems & routers to use two simultaneous data streams for greater throughput
PROFESSIONAL GRADE SOLUTION
- The rugged housing, extra heavy duty mounting hardware and corrosion-resistant materials are ideal for outdoor applications
Coax is Critical
The wrong cabling can wipe out antenna gain. Use only low-loss 50 Ohm coax designed for high frequency applications like our ANT-140-020 series available in multiple pre-made lengths.
Protect Yourself
Outdoor antennas should include inline lightning arresters to protect equipment and structures. Our ANT-2xx-001 series gas discharge lightning arresters protect against strikes up to 10 kA.
Water is the Enemy
If moisture gets into the cabling it can create intermittent shorts and permanent damage. Seal all outdoor connections with our ANT-900-002 Pro-Grade Coax Silicone Sealing Tape.
For Best Results
- Orient antenna vertically
- Mount antenna as high as possible
- Keep coax leads as short as possible
- Don't use 75 Ohm coax (RG6, RG59)
- Don't use a splitter to connect 1 modem port to both antenna leads
- Fully tighten coax connectors to antenna connectors
- Position away from other antennas, lighting fixtures, motors, Low-E or tinted/coated windows, large metal or concrete objects
- Stand 3+ feet away from antenna when testing
- Maximize signal Quality (SINR, RSRQ) not signal Strength (RSSI, RSRP, bars)
- Compatible Carrier: Verizon, AT&T, T-Mobile, Sprint and etc; Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz; Gain: 5dBi; Direction: Omni-directional; Waterproof: Rainning Proof; Feature: Fixed Wall Mount; Thru Hole Mount; Antenna Mounting Screws Diameter: M12 11.76mm-11.95mm; Cable Length: 3m/10 feet; Connector: SMA Male Connector; with RP-SMA Male Connector Adapter;
- Package List: 1 x Antenna, 1 x RP-SMA Connector Adapter, 1 x Wall Mount Bracket, 4 x Self-tapping Screws (As the Picture Shown);
- Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway; Home Office Indoor Cell Phone Signal Booster Repeater, Vehicle Car Truck RV Bus Van Mobile Cellular Amplifier;
- Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera; Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder;
- Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert;
User questions & answers
Question: | What does a coaxial hookup to to that runs into the house |
Answer: | Yes |
Question: | Will this work with a spypoint trail camera |
Answer: | Unit dimensions are, 19 wideX 20.625 deepX 33 high |
Question: | Will this work with a stealthcam |
Answer: | Yes, |
Question: | Does anyone know how this compares to the more expensive spypoint ca-01 antenae |
Answer: | Hi the unit is approx. 14 inches deep x 29 inches high x 15 inches wide |
Product description
Proxicast's ultra wide-band log-periodic dipole array directional antenna is compatible with all 4G/LTE data services from Verizon, AT&T, T-Mobile, US Cellular, Bell, Rogers, Telus and many other cellular operators. It can also be used with 4.9 GHz Public Safety Band radios, 2.4 GHz Wi-Fi access points and unlicensed 900 MHz systems.
This small, light-weight, easy-to-install directional antenna improves transmit and receive signals across a wide frequency spectrum range and is ideal for many outdoor applications, including building rooftops, utility poles, surveillance trailers, well sites, remote telemetry units, homes and offices.
With the appropriate adapter cable (not included), this antenna is compatible with USB cellular modems, MiFi Hotspots and routers from companies such as Cisco, Cradlepoint, Digi, MoFi, Pepwave, Proxicast, and Sierra. It is also compatible with most signal booster/amplifiers.
Electrical Properties
• Frequency Range: 698-960 / 1710-2700 / 4400-4900 MHz
• Impedance: 50 Ohms
• Gain: 9/11 dBi ~ 6 dBi in Band 71 (615-698 MHz)
• Beam Width: V 60°, H 90°
• Polarization: Vertical
• VSWR: ADGP < 1.8:1
• Max Input Power: 50 W
Mechanical Properties
• Connector: N Female on 12 inch LMR 195 pigtail
• Material: ABS / Brass / Aluminum
• Op. Temp.: -40 to +70C
• Weight (w/o bracket): 510 g (18 oz)
• Dimensions: 440 x 209 x 70 mm (17.3 x 8.2 x 2.8 in) excluding 90 x 70 mm bracket
• Mounting: Pole or Wall (2.0 in dia. U-bolts & bracket included)
Directional antennas must be pointed toward a cell tower. For help locating your nearest tower, consult the OpenSignal or CellReception sites.
For MIMO applications mount 2 identical antennas at 90° angles to each other.
Not for use with cell phones.
Since 2000, USA-based Proxicast has been manufacturing innovative professional grade wireless equipment.
- Works with 2G, 3G, 4G, LTE, xLTE, AWS, GSM cellular data services from carriers such as Verizon, AT&T, Sprint, T-Mobile, Telus, Bell Canada, Rogers, DigiCel and more
- Also compatible with 4.9 GHz Public Safety, 2.4 GHz Wi-Fi and 900 MHz radio systems
- High gain increases signal strength and data speeds in areas with marginal coverage
- Female N connector with 12" pigtail - Outdoor weatherproof enclosure protects antenna elements
- Includes pole/wall mounting bracket and hardware (mast sold separately)
User questions & answers
Question: | Will this work with verizon lte router model ask-rtl |
Answer: | Yes this antenna is compatible with all of the frequencies supported by that router. You need a TS9-SMA adapter to plug into the antenna port on the router: https://amzn.to/3g2b3ob and an SMA-N coax cables to run from the router to wherever you plan to install the antenna. Keep the length of the cable as short as possible for best performance: https://amzn.to/3f6HHnz If the connections are outdoors, weatherseal them with silicone tape: https://amzn.to/3fZZ8XV |
Question: | Hi, work with usb modem huawei e |
Answer: | Yes. You will need a TS9-SMA adapter cable: https://amzn.to/2XSlmpN and an SMA to N coax extension cable: https://amzn.to/2YfEAoE If you mount the antenna outdoors, you need to weatherseal the connectors with silicone tape: https://amzn.to/2YfEAoE |
Question: | Wanting to know What I need to connect this the antenna to? Using it for cell phone on the lake |
Answer: | Well, the antenna has a coax pigtail with a Female type N Connector so you would need a matching impedance coaxial cable of sufficient length for your application with a Male N connector on one end and a suitable connector on the other end to connect to whatever device you hope to use. I don't know any cellular smart phones that directly accept external antenna inputs. I use a pair of these mounted with perpendicular antenna polarity and connected to a Netgear Nighthawk M1 Mobile Hotspot Router (MR1100) for backup cellular data connectivity when we have severe storm outages and have no cable Internet. The M1 accepts (2) TS-9 connectors so I purchased cables to which I added TS-9 pigtails. |
Question: | Does tthe antenna come with the bracket to connect to pole |
Answer: | Yes it does. And the antenna itself solved our bad signal issue. |
Latest Reviews
View all
Cigar For Dad
- Updated: 02.02.2023
- Read reviews

Led Light For 5 Gallon Aquarium
- Updated: 02.02.2023
- Read reviews

Ge Life Cleaning Products
- Updated: 23.02.2023
- Read reviews

Toilet Brushes Walmart
- Updated: 14.06.2023
- Read reviews

Step Parenting Books
- Updated: 18.06.2023
- Read reviews